summaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree/bindings/mtd/nand-controller.yaml
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings/mtd/nand-controller.yaml')
-rw-r--r--Documentation/devicetree/bindings/mtd/nand-controller.yaml152
1 files changed, 152 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/mtd/nand-controller.yaml b/Documentation/devicetree/bindings/mtd/nand-controller.yaml
new file mode 100644
index 000000000..359a015d4
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/nand-controller.yaml
@@ -0,0 +1,152 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mtd/nand-controller.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NAND Chip and NAND Controller Generic Binding
+
+maintainers:
+ - Miquel Raynal <miquel.raynal@bootlin.com>
+ - Richard Weinberger <richard@nod.at>
+
+description: |
+ The NAND controller should be represented with its own DT node, and
+ all NAND chips attached to this controller should be defined as
+ children nodes of the NAND controller. This representation should be
+ enforced even for simple controllers supporting only one chip.
+
+ The ECC strength and ECC step size properties define the user
+ desires in terms of correction capability of a controller. Together,
+ they request the ECC engine to correct {strength} bit errors per
+ {size} bytes.
+
+ The interpretation of these parameters is implementation-defined, so
+ not all implementations must support all possible
+ combinations. However, implementations are encouraged to further
+ specify the value(s) they support.
+
+properties:
+ $nodename:
+ pattern: "^nand-controller(@.*)?"
+
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 0
+
+ ranges: true
+
+ cs-gpios:
+ description:
+ Array of chip-select available to the controller. The first
+ entries are a 1:1 mapping of the available chip-select on the
+ NAND controller (even if they are not used). As many additional
+ chip-select as needed may follow and should be phandles of GPIO
+ lines. 'reg' entries of the NAND chip subnodes become indexes of
+ this array when this property is present.
+ minItems: 1
+ maxItems: 8
+
+patternProperties:
+ "^nand@[a-f0-9]$":
+ type: object
+ $ref: "nand-chip.yaml#"
+
+ properties:
+ reg:
+ description:
+ Contains the chip-select IDs.
+
+ nand-ecc-placement:
+ description:
+ Location of the ECC bytes. This location is unknown by default
+ but can be explicitly set to "oob", if all ECC bytes are
+ known to be stored in the OOB area, or "interleaved" if ECC
+ bytes will be interleaved with regular data in the main area.
+ $ref: /schemas/types.yaml#/definitions/string
+ enum: [ oob, interleaved ]
+
+ nand-bus-width:
+ description:
+ Bus width to the NAND chip
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [8, 16]
+ default: 8
+
+ nand-on-flash-bbt:
+ description:
+ With this property, the OS will search the device for a Bad
+ Block Table (BBT). If not found, it will create one, reserve
+ a few blocks at the end of the device to store it and update
+ it as the device ages. Otherwise, the out-of-band area of a
+ few pages of all the blocks will be scanned at boot time to
+ find Bad Block Markers (BBM). These markers will help to
+ build a volatile BBT in RAM.
+ $ref: /schemas/types.yaml#/definitions/flag
+
+ nand-ecc-maximize:
+ description:
+ Whether or not the ECC strength should be maximized. The
+ maximum ECC strength is both controller and chip
+ dependent. The ECC engine has to select the ECC config
+ providing the best strength and taking the OOB area size
+ constraint into account. This is particularly useful when
+ only the in-band area is used by the upper layers, and you
+ want to make your NAND as reliable as possible.
+ $ref: /schemas/types.yaml#/definitions/flag
+
+ nand-is-boot-medium:
+ description:
+ Whether or not the NAND chip is a boot medium. Drivers might
+ use this information to select ECC algorithms supported by
+ the boot ROM or similar restrictions.
+ $ref: /schemas/types.yaml#/definitions/flag
+
+ nand-rb:
+ description:
+ Contains the native Ready/Busy IDs.
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+
+ rb-gpios:
+ description:
+ Contains one or more GPIO descriptor (the numper of descriptor
+ depends on the number of R/B pins exposed by the flash) for the
+ Ready/Busy pins. Active state refers to the NAND ready state and
+ should be set to GPIOD_ACTIVE_HIGH unless the signal is inverted.
+
+ wp-gpios:
+ description:
+ Contains one GPIO descriptor for the Write Protect pin.
+ Active state refers to the NAND Write Protect state and should be
+ set to GPIOD_ACTIVE_LOW unless the signal is inverted.
+ maxItems: 1
+
+ required:
+ - reg
+
+required:
+ - "#address-cells"
+ - "#size-cells"
+
+additionalProperties: true
+
+examples:
+ - |
+ nand-controller {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cs-gpios = <0>, <&gpioA 1>; /* A single native CS is available */
+
+ /* controller specific properties */
+
+ nand@0 {
+ reg = <0>; /* Native CS */
+ /* NAND chip specific properties */
+ };
+
+ nand@1 {
+ reg = <1>; /* GPIO CS */
+ };
+ };