summaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree/bindings/mux
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings/mux')
-rw-r--r--Documentation/devicetree/bindings/mux/adi,adg792a.txt75
-rw-r--r--Documentation/devicetree/bindings/mux/adi,adgs1408.txt48
-rw-r--r--Documentation/devicetree/bindings/mux/gpio-mux.yaml99
-rw-r--r--Documentation/devicetree/bindings/mux/mux-consumer.yaml67
-rw-r--r--Documentation/devicetree/bindings/mux/mux-controller.yaml206
-rw-r--r--Documentation/devicetree/bindings/mux/reg-mux.yaml146
6 files changed, 641 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/mux/adi,adg792a.txt b/Documentation/devicetree/bindings/mux/adi,adg792a.txt
new file mode 100644
index 000000000..b0e5bf690
--- /dev/null
+++ b/Documentation/devicetree/bindings/mux/adi,adg792a.txt
@@ -0,0 +1,75 @@
+Bindings for Analog Devices ADG792A/G Triple 4:1 Multiplexers
+
+Required properties:
+- compatible : "adi,adg792a" or "adi,adg792g"
+- #mux-control-cells : <0> if parallel (the three muxes are bound together
+ with a single mux controller controlling all three muxes), or <1> if
+ not (one mux controller for each mux).
+* Standard mux-controller bindings as described in mux-controller.yaml
+
+Optional properties for ADG792G:
+- gpio-controller : if present, #gpio-cells below is required.
+- #gpio-cells : should be <2>
+ - First cell is the GPO line number, i.e. 0 or 1
+ - Second cell is used to specify active high (0)
+ or active low (1)
+
+Optional properties:
+- idle-state : if present, array of states that the mux controllers will have
+ when idle. The special state MUX_IDLE_AS_IS is the default and
+ MUX_IDLE_DISCONNECT is also supported.
+
+States 0 through 3 correspond to signals A through D in the datasheet.
+
+Example:
+
+ /*
+ * Three independent mux controllers (of which one is used).
+ * Mux 0 is disconnected when idle, mux 1 idles in the previously
+ * selected state and mux 2 idles with signal B.
+ */
+ &i2c0 {
+ mux: mux-controller@50 {
+ compatible = "adi,adg792a";
+ reg = <0x50>;
+ #mux-control-cells = <1>;
+
+ idle-state = <MUX_IDLE_DISCONNECT MUX_IDLE_AS_IS 1>;
+ };
+ };
+
+ adc-mux {
+ compatible = "io-channel-mux";
+ io-channels = <&adc 0>;
+ io-channel-names = "parent";
+
+ mux-controls = <&mux 2>;
+
+ channels = "sync-1", "", "out";
+ };
+
+
+ /*
+ * Three parallel muxes with one mux controller, useful e.g. if
+ * the adc is differential, thus needing two signals to be muxed
+ * simultaneously for correct operation.
+ */
+ &i2c0 {
+ pmux: mux-controller@50 {
+ compatible = "adi,adg792a";
+ reg = <0x50>;
+ #mux-control-cells = <0>;
+
+ idle-state = <1>;
+ };
+ };
+
+ diff-adc-mux {
+ compatible = "io-channel-mux";
+ io-channels = <&adc 0>;
+ io-channel-names = "parent";
+
+ mux-controls = <&pmux>;
+
+ channels = "sync-1", "", "out";
+ };
diff --git a/Documentation/devicetree/bindings/mux/adi,adgs1408.txt b/Documentation/devicetree/bindings/mux/adi,adgs1408.txt
new file mode 100644
index 000000000..453a38961
--- /dev/null
+++ b/Documentation/devicetree/bindings/mux/adi,adgs1408.txt
@@ -0,0 +1,48 @@
+Bindings for Analog Devices ADGS1408/1409 8:1/Dual 4:1 Mux
+
+Required properties:
+- compatible : Should be one of
+ * "adi,adgs1408"
+ * "adi,adgs1409"
+* Standard mux-controller bindings as described in mux-controller.yaml
+
+Optional properties for ADGS1408/1409:
+- gpio-controller : if present, #gpio-cells is required.
+- #gpio-cells : should be <2>
+ - First cell is the GPO line number, i.e. 0 to 3
+ for ADGS1408 and 0 to 4 for ADGS1409
+ - Second cell is used to specify active high (0)
+ or active low (1)
+
+Optional properties:
+- idle-state : if present, the state that the mux controller will have
+ when idle. The special state MUX_IDLE_AS_IS is the default and
+ MUX_IDLE_DISCONNECT is also supported.
+
+States 0 through 7 correspond to signals S1 through S8 in the datasheet.
+For ADGS1409 only states 0 to 3 are available.
+
+Example:
+
+ /*
+ * One mux controller.
+ * Mux state set to idle as is (no idle-state declared)
+ */
+ &spi0 {
+ mux: mux-controller@0 {
+ compatible = "adi,adgs1408";
+ reg = <0>;
+ spi-max-frequency = <1000000>;
+ #mux-control-cells = <0>;
+ };
+ }
+
+ adc-mux {
+ compatible = "io-channel-mux";
+ io-channels = <&adc 1>;
+ io-channel-names = "parent";
+ mux-controls = <&mux>;
+
+ channels = "out_a0", "out_a1", "test0", "test1",
+ "out_b0", "out_b1", "testb0", "testb1";
+ };
diff --git a/Documentation/devicetree/bindings/mux/gpio-mux.yaml b/Documentation/devicetree/bindings/mux/gpio-mux.yaml
new file mode 100644
index 000000000..ee4de9fba
--- /dev/null
+++ b/Documentation/devicetree/bindings/mux/gpio-mux.yaml
@@ -0,0 +1,99 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mux/gpio-mux.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: GPIO-based multiplexer controller bindings
+
+maintainers:
+ - Peter Rosin <peda@axentia.se>
+
+description: |+
+ Define what GPIO pins are used to control a multiplexer. Or several
+ multiplexers, if the same pins control more than one multiplexer.
+
+ The multiplexer state is defined as the number represented by the
+ multiplexer GPIO pins, where the first pin is the least significant
+ bit. An active pin is a binary 1, an inactive pin is a binary 0.
+
+properties:
+ compatible:
+ const: gpio-mux
+
+ mux-gpios:
+ description:
+ List of gpios used to control the multiplexer, least significant bit first.
+
+ '#mux-control-cells':
+ enum: [ 0, 1 ]
+
+ '#mux-state-cells':
+ enum: [ 1, 2 ]
+
+ idle-state:
+ default: -1
+
+required:
+ - compatible
+ - mux-gpios
+anyOf:
+ - required:
+ - "#mux-control-cells"
+ - required:
+ - "#mux-state-cells"
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ mux: mux-controller {
+ compatible = "gpio-mux";
+ #mux-control-cells = <0>;
+
+ mux-gpios = <&pioA 0 GPIO_ACTIVE_HIGH>,
+ <&pioA 1 GPIO_ACTIVE_HIGH>;
+ };
+
+ adc-mux {
+ compatible = "io-channel-mux";
+ io-channels = <&adc 0>;
+ io-channel-names = "parent";
+
+ mux-controls = <&mux>;
+
+ channels = "sync-1", "in", "out", "sync-2";
+ };
+
+ i2c-mux {
+ compatible = "i2c-mux";
+ i2c-parent = <&i2c1>;
+
+ mux-controls = <&mux>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ i2c@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ssd1307: oled@3c {
+ reg = <0x3c>;
+ };
+ };
+
+ i2c@3 {
+ reg = <3>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pca9555: pca9555@20 {
+ reg = <0x20>;
+ };
+ };
+ };
+...
diff --git a/Documentation/devicetree/bindings/mux/mux-consumer.yaml b/Documentation/devicetree/bindings/mux/mux-consumer.yaml
new file mode 100644
index 000000000..d3d854967
--- /dev/null
+++ b/Documentation/devicetree/bindings/mux/mux-consumer.yaml
@@ -0,0 +1,67 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mux/mux-consumer.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Common multiplexer controller consumer bindings
+
+maintainers:
+ - Peter Rosin <peda@axentia.se>
+
+description: |
+ Mux controller consumers should specify a list of mux controllers that they
+ want to use with a property containing a 'mux-ctrl-list':
+
+ mux-ctrl-list ::= <single-mux-ctrl> [mux-ctrl-list]
+ single-mux-ctrl ::= <mux-ctrl-phandle> [mux-ctrl-specifier]
+ mux-ctrl-phandle : phandle to mux controller node
+ mux-ctrl-specifier : array of #mux-control-cells specifying the
+ given mux controller (controller specific)
+
+ Mux controller properties should be named "mux-controls". The exact meaning of
+ each mux controller property must be documented in the device tree binding for
+ each consumer. An optional property "mux-control-names" may contain a list of
+ strings to label each of the mux controllers listed in the "mux-controls"
+ property.
+
+ If it is required to provide the state that the mux controller needs to
+ be set to, the property "mux-states" must be used. An optional property
+ "mux-state-names" can be used to provide a list of strings, to label
+ each of the multiplixer states listed in the "mux-states" property.
+
+ Properties "mux-controls" and "mux-states" can be used depending on how
+ the consumers want to control the mux controller. If the consumer needs
+ needs to set multiple states in a mux controller, then property
+ "mux-controls" can be used. If the consumer needs to set the mux
+ controller to a given state then property "mux-states" can be used.
+
+ mux-ctrl-specifier typically encodes the chip-relative mux controller number.
+ If the mux controller chip only provides a single mux controller, the
+ mux-ctrl-specifier can typically be left out.
+
+select: true
+
+properties:
+ mux-controls:
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+
+ mux-states:
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+
+ mux-control-names:
+ description:
+ Devices that use more than a single mux controller can use the
+ "mux-control-names" property to map the name of the requested mux
+ controller to an index into the list given by the "mux-controls" property.
+
+ mux-state-names:
+ description:
+ Devices that use more than a single multiplexer state can use the
+ "mux-state-names" property to map the name of the requested mux
+ controller to an index into the list given by the "mux-states"
+ property.
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/mux/mux-controller.yaml b/Documentation/devicetree/bindings/mux/mux-controller.yaml
new file mode 100644
index 000000000..c855fbad3
--- /dev/null
+++ b/Documentation/devicetree/bindings/mux/mux-controller.yaml
@@ -0,0 +1,206 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mux/mux-controller.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Common multiplexer controller provider bindings
+
+maintainers:
+ - Peter Rosin <peda@axentia.se>
+
+description: |
+ A multiplexer (or mux) controller will have one, or several, consumer devices
+ that uses the mux controller. Thus, a mux controller can possibly control
+ several parallel multiplexers. Presumably there will be at least one
+ multiplexer needed by each consumer, but a single mux controller can of course
+ control several multiplexers for a single consumer.
+
+ A mux controller provides a number of states to its consumers, and the state
+ space is a simple zero-based enumeration. I.e. 0-1 for a 2-way multiplexer,
+ 0-7 for an 8-way multiplexer, etc.
+
+
+ Mux controller nodes
+ --------------------
+
+ Mux controller nodes must specify the number of cells used for the
+ specifier using the '#mux-control-cells' or '#mux-state-cells' property.
+ The value of '#mux-state-cells' will always be one greater than the value
+ of '#mux-control-cells'.
+
+ Optionally, mux controller nodes can also specify the state the mux should
+ have when it is idle. The idle-state property is used for this. If the
+ idle-state is not present, the mux controller is typically left as is when
+ it is idle. For multiplexer chips that expose several mux controllers, the
+ idle-state property is an array with one idle state for each mux controller.
+
+ The special value (-1) may be used to indicate that the mux should be left
+ as is when it is idle. This is the default, but can still be useful for
+ mux controller chips with more than one mux controller, particularly when
+ there is a need to "step past" a mux controller and set some other idle
+ state for a mux controller with a higher index.
+
+ Some mux controllers have the ability to disconnect the input/output of the
+ multiplexer. Using this disconnected high-impedance state as the idle state
+ is indicated with idle state (-2).
+
+ These constants are available in
+
+ #include <dt-bindings/mux/mux.h>
+
+ as MUX_IDLE_AS_IS (-1) and MUX_IDLE_DISCONNECT (-2).
+
+ An example mux controller node look like this (the adg972a chip is a triple
+ 4-way multiplexer):
+
+ mux: mux-controller@50 {
+ compatible = "adi,adg792a";
+ reg = <0x50>;
+ #mux-control-cells = <1>;
+
+ idle-state = <MUX_IDLE_DISCONNECT MUX_IDLE_AS_IS 2>;
+ };
+
+select:
+ anyOf:
+ - properties:
+ $nodename:
+ pattern: '^mux-controller'
+ - required:
+ - '#mux-control-cells'
+ - required:
+ - '#mux-state-cells'
+
+properties:
+ $nodename:
+ pattern: '^mux-controller(@.*|-[0-9a-f]+)?$'
+
+ '#mux-control-cells':
+ enum: [ 0, 1 ]
+
+ '#mux-state-cells':
+ enum: [ 1, 2 ]
+
+ idle-state:
+ $ref: /schemas/types.yaml#/definitions/int32
+ minimum: -2
+
+ idle-states:
+ description: |
+ Mux controller nodes can specify the state the mux should have when it is
+ idle. If the idle-state is not present, the mux controller is typically
+ left as is when it is idle. For multiplexer chips that expose several mux
+ controllers, the idle-state property is an array with one idle state for
+ each mux controller.
+
+ The special value (-1) may be used to indicate that the mux should be left
+ as is when it is idle. This is the default, but can still be useful for
+ mux controller chips with more than one mux controller, particularly when
+ there is a need to "step past" a mux controller and set some other idle
+ state for a mux controller with a higher index.
+
+ Some mux controllers have the ability to disconnect the input/output of the
+ multiplexer. Using this disconnected high-impedance state as the idle state
+ is indicated with idle state (-2).
+ $ref: /schemas/types.yaml#/definitions/int32-array
+ items:
+ minimum: -2
+
+additionalProperties: true
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ /* One consumer of a 2-way mux controller (one GPIO-line) */
+ mux: mux-controller {
+ compatible = "gpio-mux";
+ #mux-control-cells = <0>;
+
+ mux-gpios = <&pioA 0 GPIO_ACTIVE_HIGH>;
+ };
+
+ adc-mux {
+ compatible = "io-channel-mux";
+ io-channels = <&adc 0>;
+ io-channel-names = "parent";
+
+ mux-controls = <&mux>;
+ mux-control-names = "adc";
+
+ channels = "sync", "in";
+ };
+
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ /*
+ * Two consumers (one for an ADC line and one for an i2c bus) of
+ * parallel 4-way multiplexers controlled by the same two GPIO-lines.
+ */
+ mux2: mux-controller {
+ compatible = "gpio-mux";
+ #mux-control-cells = <0>;
+
+ mux-gpios = <&pioA 0 GPIO_ACTIVE_HIGH>,
+ <&pioA 1 GPIO_ACTIVE_HIGH>;
+ };
+
+ adc-mux {
+ compatible = "io-channel-mux";
+ io-channels = <&adc 0>;
+ io-channel-names = "parent";
+
+ mux-controls = <&mux2>;
+
+ channels = "sync-1", "in", "out", "sync-2";
+ };
+
+ i2c-mux {
+ compatible = "i2c-mux";
+ i2c-parent = <&i2c1>;
+
+ mux-controls = <&mux2>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ i2c@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ssd1307: oled@3c {
+ reg = <0x3c>;
+ };
+ };
+
+ i2c@3 {
+ reg = <3>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pca9555: pca9555@20 {
+ reg = <0x20>;
+ };
+ };
+ };
+
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ mux1: mux-controller {
+ compatible = "gpio-mux";
+ #mux-state-cells = <1>;
+ mux-gpios = <&exp_som 2 GPIO_ACTIVE_HIGH>;
+ };
+
+ transceiver4: can-phy4 {
+ compatible = "ti,tcan1042";
+ #phy-cells = <0>;
+ max-bitrate = <5000000>;
+ standby-gpios = <&exp_som 7 GPIO_ACTIVE_HIGH>;
+ mux-states = <&mux1 1>;
+ };
+...
diff --git a/Documentation/devicetree/bindings/mux/reg-mux.yaml b/Documentation/devicetree/bindings/mux/reg-mux.yaml
new file mode 100644
index 000000000..dfd9ea582
--- /dev/null
+++ b/Documentation/devicetree/bindings/mux/reg-mux.yaml
@@ -0,0 +1,146 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mux/reg-mux.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Generic register bitfield-based multiplexer controller bindings
+
+maintainers:
+ - Peter Rosin <peda@axentia.se>
+
+description: |+
+ Define register bitfields to be used to control multiplexers. The parent
+ device tree node must be a device node to provide register r/w access.
+
+properties:
+ compatible:
+ enum:
+ - reg-mux # parent device of mux controller is not syscon device
+ - mmio-mux # parent device of mux controller is syscon device
+
+ reg: true
+
+ '#mux-control-cells':
+ const: 1
+
+ mux-reg-masks:
+ $ref: /schemas/types.yaml#/definitions/uint32-matrix
+ items:
+ items:
+ - description: register offset
+ - description: pre-shifted bitfield mask
+ description: Each entry pair describes a single mux control.
+
+ idle-states: true
+
+required:
+ - compatible
+ - mux-reg-masks
+ - '#mux-control-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ /* The parent device of mux controller is not a syscon device. */
+
+ #include <dt-bindings/mux/mux.h>
+
+ mux-controller {
+ compatible = "reg-mux";
+ #mux-control-cells = <1>;
+ mux-reg-masks =
+ <0x54 0xf8>, /* 0: reg 0x54, bits 7:3 */
+ <0x54 0x07>; /* 1: reg 0x54, bits 2:0 */
+ };
+
+ mdio-mux-1 {
+ compatible = "mdio-mux-multiplexer";
+ mux-controls = <&mux1 0>;
+ mdio-parent-bus = <&emdio1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ mdio@0 {
+ reg = <0x0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ mdio@8 {
+ reg = <0x8>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
+ mdio-mux-2 {
+ compatible = "mdio-mux-multiplexer";
+ mux-controls = <&mux1 1>;
+ mdio-parent-bus = <&emdio2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ mdio@0 {
+ reg = <0x0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ mdio@1 {
+ reg = <0x1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
+ - |
+ /* The parent device of mux controller is syscon device. */
+
+ #include <dt-bindings/mux/mux.h>
+ syscon@1000 {
+ reg = <0x1000 0x100>;
+
+ mux2: mux-controller {
+ compatible = "mmio-mux";
+ #mux-control-cells = <1>;
+
+ mux-reg-masks =
+ <0x3 0x30>, /* 0: reg 0x3, bits 5:4 */
+ <0x3 0x40>; /* 1: reg 0x3, bit 6 */
+ idle-states = <MUX_IDLE_AS_IS>, <0>;
+ };
+ };
+
+ video-mux {
+ compatible = "video-mux";
+ mux-controls = <&mux2 0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* inputs 0..3 */
+ port@0 {
+ reg = <0>;
+ };
+ port@1 {
+ reg = <1>;
+ };
+ port@2 {
+ reg = <2>;
+ };
+ port@3 {
+ reg = <3>;
+ };
+
+ /* output */
+ port@4 {
+ reg = <4>;
+ };
+ };
+ };
+...