summaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree/bindings/net/dsa/mscc,ocelot.yaml
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings/net/dsa/mscc,ocelot.yaml')
-rw-r--r--Documentation/devicetree/bindings/net/dsa/mscc,ocelot.yaml260
1 files changed, 260 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/net/dsa/mscc,ocelot.yaml b/Documentation/devicetree/bindings/net/dsa/mscc,ocelot.yaml
new file mode 100644
index 000000000..8d93ed9c1
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/dsa/mscc,ocelot.yaml
@@ -0,0 +1,260 @@
+# SPDX-License-Identifier: (GPL-2.0 OR MIT)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/dsa/mscc,ocelot.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Microchip Ocelot Switch Family Device Tree Bindings
+
+maintainers:
+ - Vladimir Oltean <vladimir.oltean@nxp.com>
+ - Claudiu Manoil <claudiu.manoil@nxp.com>
+ - Alexandre Belloni <alexandre.belloni@bootlin.com>
+ - UNGLinuxDriver@microchip.com
+
+description: |
+ There are multiple switches which are either part of the Ocelot-1 family, or
+ derivatives of this architecture. These switches can be found embedded in
+ various SoCs and accessed using MMIO, or as discrete chips and accessed over
+ SPI or PCIe. The present DSA binding shall be used when the host controlling
+ them performs packet I/O primarily through an Ethernet port of the switch
+ (which is attached to an Ethernet port of the host), rather than through
+ Frame DMA or register-based I/O.
+
+ VSC9953 (Seville):
+
+ This is found in the NXP T1040, where it is a memory-mapped platform
+ device.
+
+ The following PHY interface types are supported:
+
+ - phy-mode = "internal": on ports 8 and 9
+ - phy-mode = "sgmii": on ports 0, 1, 2, 3, 4, 5, 6, 7
+ - phy-mode = "qsgmii": on ports 0, 1, 2, 3, 4, 5, 6, 7
+ - phy-mode = "1000base-x": on ports 0, 1, 2, 3, 4, 5, 6, 7
+
+ VSC9959 (Felix):
+
+ This is found in the NXP LS1028A. It is a PCI device, part of the larger
+ enetc root complex. As a result, the ethernet-switch node is a sub-node of
+ the PCIe root complex node and its "reg" property conforms to the parent
+ node bindings, describing it as PF 5 of device 0, bus 0.
+
+ If any external switch port is enabled, the enetc PF2 (enetc_port2) should
+ be enabled as well. This is because the internal MDIO bus (exposed through
+ EA BAR 0) used to access the MAC PCS registers truly belongs to the enetc
+ port 2 and not to Felix.
+
+ The following PHY interface types are supported:
+
+ - phy-mode = "internal": on ports 4 and 5
+ - phy-mode = "sgmii": on ports 0, 1, 2, 3
+ - phy-mode = "qsgmii": on ports 0, 1, 2, 3
+ - phy-mode = "usxgmii": on ports 0, 1, 2, 3
+ - phy-mode = "1000base-x": on ports 0, 1, 2, 3
+ - phy-mode = "2500base-x": on ports 0, 1, 2, 3
+
+properties:
+ compatible:
+ enum:
+ - mscc,vsc9953-switch
+ - pci1957,eef0
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ description:
+ Used to signal availability of PTP TX timestamps, and state changes of
+ the MAC merge layer of ports that support Frame Preemption.
+
+ little-endian: true
+ big-endian: true
+
+required:
+ - compatible
+ - reg
+
+allOf:
+ - $ref: dsa.yaml#
+ - if:
+ properties:
+ compatible:
+ const: pci1957,eef0
+ then:
+ required:
+ - interrupts
+
+unevaluatedProperties: false
+
+examples:
+ # Felix VSC9959 (NXP LS1028A)
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ pcie { /* Integrated Endpoint Root Complex */
+ #address-cells = <3>;
+ #size-cells = <2>;
+
+ ethernet-switch@0,5 {
+ compatible = "pci1957,eef0";
+ reg = <0x000500 0 0 0 0>;
+ interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+
+ ethernet-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ phy-mode = "qsgmii";
+ phy-handle = <&phy0>;
+ managed = "in-band-status";
+ };
+
+ port@1 {
+ reg = <1>;
+ phy-mode = "qsgmii";
+ phy-handle = <&phy1>;
+ managed = "in-band-status";
+ };
+
+ port@2 {
+ reg = <2>;
+ phy-mode = "qsgmii";
+ phy-handle = <&phy2>;
+ managed = "in-band-status";
+ };
+
+ port@3 {
+ reg = <3>;
+ phy-mode = "qsgmii";
+ phy-handle = <&phy3>;
+ managed = "in-band-status";
+ };
+
+ port@4 {
+ reg = <4>;
+ ethernet = <&enetc_port2>;
+ phy-mode = "internal";
+
+ fixed-link {
+ speed = <2500>;
+ full-duplex;
+ pause;
+ };
+ };
+
+ port@5 {
+ reg = <5>;
+ ethernet = <&enetc_port3>;
+ phy-mode = "internal";
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ pause;
+ };
+ };
+ };
+ };
+ };
+ # Seville VSC9953 (NXP T1040)
+ - |
+ soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ ethernet-switch@800000 {
+ compatible = "mscc,vsc9953-switch";
+ reg = <0x800000 0x290000>;
+ little-endian;
+
+ ethernet-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ phy-mode = "qsgmii";
+ phy-handle = <&phy0>;
+ managed = "in-band-status";
+ };
+
+ port@1 {
+ reg = <1>;
+ phy-mode = "qsgmii";
+ phy-handle = <&phy1>;
+ managed = "in-band-status";
+ };
+
+ port@2 {
+ reg = <2>;
+ phy-mode = "qsgmii";
+ phy-handle = <&phy2>;
+ managed = "in-band-status";
+ };
+
+ port@3 {
+ reg = <3>;
+ phy-mode = "qsgmii";
+ phy-handle = <&phy3>;
+ managed = "in-band-status";
+ };
+
+ port@4 {
+ reg = <4>;
+ phy-mode = "qsgmii";
+ phy-handle = <&phy4>;
+ managed = "in-band-status";
+ };
+
+ port@5 {
+ reg = <5>;
+ phy-mode = "qsgmii";
+ phy-handle = <&phy5>;
+ managed = "in-band-status";
+ };
+
+ port@6 {
+ reg = <6>;
+ phy-mode = "qsgmii";
+ phy-handle = <&phy6>;
+ managed = "in-band-status";
+ };
+
+ port@7 {
+ reg = <7>;
+ phy-mode = "qsgmii";
+ phy-handle = <&phy7>;
+ managed = "in-band-status";
+ };
+
+ port@8 {
+ reg = <8>;
+ phy-mode = "internal";
+ ethernet = <&enet0>;
+
+ fixed-link {
+ speed = <2500>;
+ full-duplex;
+ pause;
+ };
+ };
+
+ port@9 {
+ reg = <9>;
+ phy-mode = "internal";
+ ethernet = <&enet1>;
+
+ fixed-link {
+ speed = <2500>;
+ full-duplex;
+ pause;
+ };
+ };
+ };
+ };
+ };