diff options
Diffstat (limited to '')
| -rw-r--r-- | Documentation/devicetree/bindings/net/fsl-fman.txt | 547 |
1 files changed, 547 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/net/fsl-fman.txt b/Documentation/devicetree/bindings/net/fsl-fman.txt new file mode 100644 index 000000000..b9055335d --- /dev/null +++ b/Documentation/devicetree/bindings/net/fsl-fman.txt @@ -0,0 +1,547 @@ +============================================================================= +Freescale Frame Manager Device Bindings + +CONTENTS + - FMan Node + - FMan Port Node + - FMan MURAM Node + - FMan dTSEC/XGEC/mEMAC Node + - FMan IEEE 1588 Node + - FMan MDIO Node + - Example + +============================================================================= +FMan Node + +DESCRIPTION + +Due to the fact that the FMan is an aggregation of sub-engines (ports, MACs, +etc.) the FMan node will have child nodes for each of them. + +PROPERTIES + +- compatible + Usage: required + Value type: <stringlist> + Definition: Must include "fsl,fman" + FMan version can be determined via FM_IP_REV_1 register in the + FMan block. The offset is 0xc4 from the beginning of the + Frame Processing Manager memory map (0xc3000 from the + beginning of the FMan node). + +- cell-index + Usage: required + Value type: <u32> + Definition: Specifies the index of the FMan unit. + + The cell-index value may be used by the SoC, to identify the + FMan unit in the SoC memory map. In the table below, + there's a description of the cell-index use in each SoC: + + - P1023: + register[bit] FMan unit cell-index + ============================================================ + DEVDISR[1] 1 0 + + - P2041, P3041, P4080 P5020, P5040: + register[bit] FMan unit cell-index + ============================================================ + DCFG_DEVDISR2[6] 1 0 + DCFG_DEVDISR2[14] 2 1 + (Second FM available only in P4080 and P5040) + + - B4860, T1040, T2080, T4240: + register[bit] FMan unit cell-index + ============================================================ + DCFG_CCSR_DEVDISR2[24] 1 0 + DCFG_CCSR_DEVDISR2[25] 2 1 + (Second FM available only in T4240) + + DEVDISR, DCFG_DEVDISR2 and DCFG_CCSR_DEVDISR2 are located in + the specific SoC "Device Configuration/Pin Control" Memory + Map. + +- reg + Usage: required + Value type: <prop-encoded-array> + Definition: A standard property. Specifies the offset of the + following configuration registers: + - BMI configuration registers. + - QMI configuration registers. + - DMA configuration registers. + - FPM configuration registers. + - FMan controller configuration registers. + +- ranges + Usage: required + Value type: <prop-encoded-array> + Definition: A standard property. + +- clocks + Usage: required + Value type: <prop-encoded-array> + Definition: phandle for the fman input clock. + +- clock-names + usage: required + Value type: <stringlist> + Definition: "fmanclk" for the fman input clock. + +- interrupts + Usage: required + Value type: <prop-encoded-array> + Definition: A pair of IRQs are specified in this property. + The first element is associated with the event interrupts and + the second element is associated with the error interrupts. + +- fsl,qman-channel-range + Usage: required + Value type: <prop-encoded-array> + Definition: Specifies the range of the available dedicated + channels in the FMan. The first cell specifies the beginning + of the range and the second cell specifies the number of + channels. + Further information available at: + "Work Queue (WQ) Channel Assignments in the QMan" section + in DPAA Reference Manual. + +- fsl,qman +- fsl,bman + Usage: required + Definition: See soc/fsl/qman.txt and soc/fsl/bman.txt + +- fsl,erratum-a050385 + Usage: optional + Value type: boolean + Definition: A boolean property. Indicates the presence of the + erratum A050385 which indicates that DMA transactions that are + split can result in a FMan lock. + +============================================================================= +FMan MURAM Node + +DESCRIPTION + +FMan Internal memory - shared between all the FMan modules. +It contains data structures that are common and written to or read by +the modules. +FMan internal memory is split into the following parts: + Packet buffering (Tx/Rx FIFOs) + Frames internal context + +PROPERTIES + +- compatible + Usage: required + Value type: <stringlist> + Definition: Must include "fsl,fman-muram" + +- ranges + Usage: required + Value type: <prop-encoded-array> + Definition: A standard property. + Specifies the multi-user memory offset and the size within + the FMan. + +EXAMPLE + +muram@0 { + compatible = "fsl,fman-muram"; + ranges = <0 0x000000 0x28000>; +}; + +============================================================================= +FMan Port Node + +DESCRIPTION + +The Frame Manager (FMan) supports several types of hardware ports: + Ethernet receiver (RX) + Ethernet transmitter (TX) + Offline/Host command (O/H) + +PROPERTIES + +- compatible + Usage: required + Value type: <stringlist> + Definition: A standard property. + Must include one of the following: + - "fsl,fman-v2-port-oh" for FManV2 OH ports + - "fsl,fman-v2-port-rx" for FManV2 RX ports + - "fsl,fman-v2-port-tx" for FManV2 TX ports + - "fsl,fman-v3-port-oh" for FManV3 OH ports + - "fsl,fman-v3-port-rx" for FManV3 RX ports + - "fsl,fman-v3-port-tx" for FManV3 TX ports + +- cell-index + Usage: required + Value type: <u32> + Definition: Specifies the hardware port id. + Each hardware port on the FMan has its own hardware PortID. + Super set of all hardware Port IDs available at FMan Reference + Manual under "FMan Hardware Ports in Freescale Devices" table. + + Each hardware port is assigned a 4KB, port-specific page in + the FMan hardware port memory region (which is part of the + FMan memory map). The first 4 KB in the FMan hardware ports + memory region is used for what are called common registers. + The subsequent 63 4KB pages are allocated to the hardware + ports. + The page of a specific port is determined by the cell-index. + +- reg + Usage: required + Value type: <prop-encoded-array> + Definition: There is one reg region describing the port + configuration registers. + +- fsl,fman-10g-port + Usage: optional + Value type: boolean + Definition: The default port rate is 1G. + If this property exists, the port is s 10G port. + +- fsl,fman-best-effort-port + Usage: optional + Value type: boolean + Definition: Can be defined only if 10G-support is set. + This property marks a best-effort 10G port (10G port that + may not be capable of line rate). + +EXAMPLE + +port@a8000 { + cell-index = <0x28>; + compatible = "fsl,fman-v2-port-tx"; + reg = <0xa8000 0x1000>; +}; + +port@88000 { + cell-index = <0x8>; + compatible = "fsl,fman-v2-port-rx"; + reg = <0x88000 0x1000>; +}; + +port@81000 { + cell-index = <0x1>; + compatible = "fsl,fman-v2-port-oh"; + reg = <0x81000 0x1000>; +}; + +============================================================================= +FMan dTSEC/XGEC/mEMAC Node + +Refer to Documentation/devicetree/bindings/net/fsl,fman-dtsec.yaml + +============================================================================ +FMan IEEE 1588 Node + +Refer to Documentation/devicetree/bindings/ptp/ptp-qoriq.txt + +============================================================================= +FMan MDIO Node + +DESCRIPTION + +The MDIO is a bus to which the PHY devices are connected. + +PROPERTIES + +- compatible + Usage: required + Value type: <stringlist> + Definition: A standard property. + Must include "fsl,fman-mdio" for 1 Gb/s MDIO from FMan v2. + Must include "fsl,fman-xmdio" for 10 Gb/s MDIO from FMan v2. + Must include "fsl,fman-memac-mdio" for 1/10 Gb/s MDIO from + FMan v3. + +- reg + Usage: required + Value type: <prop-encoded-array> + Definition: A standard property. + +- clocks + Usage: optional + Value type: <phandle> + Definition: A reference to the input clock of the controller + from which the MDC frequency is derived. + +- clock-frequency + Usage: optional + Value type: <u32> + Definition: Specifies the external MDC frequency, in Hertz, to + be used. Requires that the input clock is specified in the + "clocks" property. See also: mdio.yaml. + +- suppress-preamble + Usage: optional + Value type: <boolean> + Definition: Disable generation of preamble bits. See also: + mdio.yaml. + +- interrupts + Usage: required for external MDIO + Value type: <prop-encoded-array> + Definition: Event interrupt of external MDIO controller. + +- fsl,fman-internal-mdio + Usage: required for internal MDIO + Value type: boolean + Definition: Fman has internal MDIO for internal PCS(Physical + Coding Sublayer) PHYs and external MDIO for external PHYs. + The settings and programming routines for internal/external + MDIO are different. Must be included for internal MDIO. + +- fsl,erratum-a009885 + Usage: optional + Value type: <boolean> + Definition: Indicates the presence of the A009885 + erratum describing that the contents of MDIO_DATA may + become corrupt unless it is read within 16 MDC cycles + of MDIO_CFG[BSY] being cleared, when performing an + MDIO read operation. + +- fsl,erratum-a011043 + Usage: optional + Value type: <boolean> + Definition: Indicates the presence of the A011043 erratum + describing that the MDIO_CFG[MDIO_RD_ER] bit may be falsely + set when reading internal PCS registers. MDIO reads to + internal PCS registers may result in having the + MDIO_CFG[MDIO_RD_ER] bit set, even when there is no error and + read data (MDIO_DATA[MDIO_DATA]) is correct. + Software may get false read error when reading internal + PCS registers through MDIO. As a workaround, all internal + MDIO accesses should ignore the MDIO_CFG[MDIO_RD_ER] bit. + +For internal PHY device on internal mdio bus, a PHY node should be created. +See the definition of the PHY node in booting-without-of.txt for an +example of how to define a PHY (Internal PHY has no interrupt line). +- For "fsl,fman-mdio" compatible internal mdio bus, the PHY is TBI PHY. +- For "fsl,fman-memac-mdio" compatible internal mdio bus, the PHY is PCS PHY, + PCS PHY addr must be '0'. + +EXAMPLE + +Example for FMan v2 external MDIO: + +mdio@f1000 { + compatible = "fsl,fman-xmdio"; + reg = <0xf1000 0x1000>; + interrupts = <101 2 0 0>; +}; + +Example for FMan v2 internal MDIO: + +mdio@e3120 { + compatible = "fsl,fman-mdio"; + reg = <0xe3120 0xee0>; + fsl,fman-internal-mdio; + + tbi1: tbi-phy@8 { + reg = <0x8>; + device_type = "tbi-phy"; + }; +}; + +Example for FMan v3 internal MDIO: + +mdio@f1000 { + compatible = "fsl,fman-memac-mdio"; + reg = <0xf1000 0x1000>; + fsl,fman-internal-mdio; + + pcsphy6: ethernet-phy@0 { + reg = <0x0>; + }; +}; + +============================================================================= +Example + +fman@400000 { + #address-cells = <1>; + #size-cells = <1>; + cell-index = <1>; + compatible = "fsl,fman" + ranges = <0 0x400000 0x100000>; + reg = <0x400000 0x100000>; + clocks = <&fman_clk>; + clock-names = "fmanclk"; + interrupts = < + 96 2 0 0 + 16 2 1 1>; + fsl,qman-channel-range = <0x40 0xc>; + + muram@0 { + compatible = "fsl,fman-muram"; + reg = <0x0 0x28000>; + }; + + port@81000 { + cell-index = <1>; + compatible = "fsl,fman-v2-port-oh"; + reg = <0x81000 0x1000>; + }; + + port@82000 { + cell-index = <2>; + compatible = "fsl,fman-v2-port-oh"; + reg = <0x82000 0x1000>; + }; + + port@83000 { + cell-index = <3>; + compatible = "fsl,fman-v2-port-oh"; + reg = <0x83000 0x1000>; + }; + + port@84000 { + cell-index = <4>; + compatible = "fsl,fman-v2-port-oh"; + reg = <0x84000 0x1000>; + }; + + port@85000 { + cell-index = <5>; + compatible = "fsl,fman-v2-port-oh"; + reg = <0x85000 0x1000>; + }; + + port@86000 { + cell-index = <6>; + compatible = "fsl,fman-v2-port-oh"; + reg = <0x86000 0x1000>; + }; + + fman1_rx_0x8: port@88000 { + cell-index = <0x8>; + compatible = "fsl,fman-v2-port-rx"; + reg = <0x88000 0x1000>; + }; + + fman1_rx_0x9: port@89000 { + cell-index = <0x9>; + compatible = "fsl,fman-v2-port-rx"; + reg = <0x89000 0x1000>; + }; + + fman1_rx_0xa: port@8a000 { + cell-index = <0xa>; + compatible = "fsl,fman-v2-port-rx"; + reg = <0x8a000 0x1000>; + }; + + fman1_rx_0xb: port@8b000 { + cell-index = <0xb>; + compatible = "fsl,fman-v2-port-rx"; + reg = <0x8b000 0x1000>; + }; + + fman1_rx_0xc: port@8c000 { + cell-index = <0xc>; + compatible = "fsl,fman-v2-port-rx"; + reg = <0x8c000 0x1000>; + }; + + fman1_rx_0x10: port@90000 { + cell-index = <0x10>; + compatible = "fsl,fman-v2-port-rx"; + reg = <0x90000 0x1000>; + }; + + fman1_tx_0x28: port@a8000 { + cell-index = <0x28>; + compatible = "fsl,fman-v2-port-tx"; + reg = <0xa8000 0x1000>; + }; + + fman1_tx_0x29: port@a9000 { + cell-index = <0x29>; + compatible = "fsl,fman-v2-port-tx"; + reg = <0xa9000 0x1000>; + }; + + fman1_tx_0x2a: port@aa000 { + cell-index = <0x2a>; + compatible = "fsl,fman-v2-port-tx"; + reg = <0xaa000 0x1000>; + }; + + fman1_tx_0x2b: port@ab000 { + cell-index = <0x2b>; + compatible = "fsl,fman-v2-port-tx"; + reg = <0xab000 0x1000>; + }; + + fman1_tx_0x2c: port@ac0000 { + cell-index = <0x2c>; + compatible = "fsl,fman-v2-port-tx"; + reg = <0xac000 0x1000>; + }; + + fman1_tx_0x30: port@b0000 { + cell-index = <0x30>; + compatible = "fsl,fman-v2-port-tx"; + reg = <0xb0000 0x1000>; + }; + + ethernet@e0000 { + compatible = "fsl,fman-dtsec"; + cell-index = <0>; + reg = <0xe0000 0x1000>; + fsl,fman-ports = <&fman1_rx_0x8 &fman1_tx_0x28>; + tbi-handle = <&tbi5>; + }; + + ethernet@e2000 { + compatible = "fsl,fman-dtsec"; + cell-index = <1>; + reg = <0xe2000 0x1000>; + fsl,fman-ports = <&fman1_rx_0x9 &fman1_tx_0x29>; + tbi-handle = <&tbi6>; + }; + + ethernet@e4000 { + compatible = "fsl,fman-dtsec"; + cell-index = <2>; + reg = <0xe4000 0x1000>; + fsl,fman-ports = <&fman1_rx_0xa &fman1_tx_0x2a>; + tbi-handle = <&tbi7>; + }; + + ethernet@e6000 { + compatible = "fsl,fman-dtsec"; + cell-index = <3>; + reg = <0xe6000 0x1000>; + fsl,fman-ports = <&fman1_rx_0xb &fman1_tx_0x2b>; + tbi-handle = <&tbi8>; + }; + + ethernet@e8000 { + compatible = "fsl,fman-dtsec"; + cell-index = <4>; + reg = <0xf0000 0x1000>; + fsl,fman-ports = <&fman1_rx_0xc &fman1_tx_0x2c>; + tbi-handle = <&tbi9>; + + ethernet@f0000 { + cell-index = <8>; + compatible = "fsl,fman-xgec"; + reg = <0xf0000 0x1000>; + fsl,fman-ports = <&fman1_rx_0x10 &fman1_tx_0x30>; + }; + + ptp-timer@fe000 { + compatible = "fsl,fman-ptp-timer"; + reg = <0xfe000 0x1000>; + }; + + mdio@f1000 { + compatible = "fsl,fman-xmdio"; + reg = <0xf1000 0x1000>; + interrupts = <101 2 0 0>; + }; +}; |