summaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree/bindings/net/qualcomm-bluetooth.yaml
diff options
context:
space:
mode:
Diffstat (limited to '')
-rw-r--r--Documentation/devicetree/bindings/net/qualcomm-bluetooth.yaml183
1 files changed, 183 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/net/qualcomm-bluetooth.yaml b/Documentation/devicetree/bindings/net/qualcomm-bluetooth.yaml
new file mode 100644
index 000000000..f93c6e7a1
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/qualcomm-bluetooth.yaml
@@ -0,0 +1,183 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/qualcomm-bluetooth.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Bluetooth Chips
+
+maintainers:
+ - Balakrishna Godavarthi <bgodavar@codeaurora.org>
+ - Rocky Liao <rjliao@codeaurora.org>
+
+description:
+ This binding describes Qualcomm UART-attached bluetooth chips.
+
+properties:
+ compatible:
+ enum:
+ - qcom,qca6174-bt
+ - qcom,qca9377-bt
+ - qcom,wcn3990-bt
+ - qcom,wcn3991-bt
+ - qcom,wcn3998-bt
+ - qcom,qca6390-bt
+ - qcom,wcn6750-bt
+
+ enable-gpios:
+ maxItems: 1
+ description: gpio specifier used to enable chip
+
+ swctrl-gpios:
+ maxItems: 1
+ description: gpio specifier is used to find status
+ of clock supply to SoC
+
+ clocks:
+ maxItems: 1
+ description: clock provided to the controller (SUSCLK_32KHZ)
+
+ vddio-supply:
+ description: VDD_IO supply regulator handle
+
+ vddxo-supply:
+ description: VDD_XO supply regulator handle
+
+ vddrf-supply:
+ description: VDD_RF supply regulator handle
+
+ vddch0-supply:
+ description: VDD_CH0 supply regulator handle
+
+ vddaon-supply:
+ description: VDD_AON supply regulator handle
+
+ vddbtcxmx-supply:
+ description: VDD_BT_CXMX supply regulator handle
+
+ vddrfacmn-supply:
+ description: VDD_RFA_CMN supply regulator handle
+
+ vddrfa0p8-supply:
+ description: VDD_RFA_0P8 suppply regulator handle
+
+ vddrfa1p7-supply:
+ description: VDD_RFA_1P7 supply regulator handle
+
+ vddrfa1p2-supply:
+ description: VDD_RFA_1P2 supply regulator handle
+
+ vddrfa2p2-supply:
+ description: VDD_RFA_2P2 supply regulator handle
+
+ vddasd-supply:
+ description: VDD_ASD supply regulator handle
+
+ max-speed:
+ description: see Documentation/devicetree/bindings/serial/serial.yaml
+
+ firmware-name:
+ description: specify the name of nvm firmware to load
+
+ local-bd-address:
+ description: see Documentation/devicetree/bindings/net/bluetooth.txt
+
+
+required:
+ - compatible
+
+additionalProperties: false
+
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,qca6174-bt
+ then:
+ required:
+ - enable-gpios
+ - clocks
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,wcn3990-bt
+ - qcom,wcn3991-bt
+ - qcom,wcn3998-bt
+ then:
+ required:
+ - vddio-supply
+ - vddxo-supply
+ - vddrf-supply
+ - vddch0-supply
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,wcn6750-bt
+ then:
+ required:
+ - enable-gpios
+ - swctrl-gpios
+ - vddio-supply
+ - vddaon-supply
+ - vddbtcxmx-supply
+ - vddrfacmn-supply
+ - vddrfa0p8-supply
+ - vddrfa1p7-supply
+ - vddrfa1p2-supply
+ - vddasd-supply
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ serial {
+
+ bluetooth {
+ compatible = "qcom,qca6174-bt";
+ enable-gpios = <&pm8994_gpios 19 GPIO_ACTIVE_HIGH>;
+ clocks = <&divclk4>;
+ firmware-name = "nvm_00440302.bin";
+ };
+ };
+ - |
+ serial {
+
+ bluetooth {
+ compatible = "qcom,wcn3990-bt";
+ vddio-supply = <&vreg_s4a_1p8>;
+ vddxo-supply = <&vreg_l7a_1p8>;
+ vddrf-supply = <&vreg_l17a_1p3>;
+ vddch0-supply = <&vreg_l25a_3p3>;
+ max-speed = <3200000>;
+ firmware-name = "crnv21.bin";
+ };
+ };
+ - |
+ serial {
+
+ bluetooth {
+ compatible = "qcom,wcn6750-bt";
+ pinctrl-names = "default";
+ pinctrl-0 = <&bt_en_default>;
+ enable-gpios = <&tlmm 85 GPIO_ACTIVE_HIGH>;
+ swctrl-gpios = <&tlmm 86 GPIO_ACTIVE_HIGH>;
+ vddio-supply = <&vreg_l19b_1p8>;
+ vddaon-supply = <&vreg_s7b_0p9>;
+ vddbtcxmx-supply = <&vreg_s7b_0p9>;
+ vddrfacmn-supply = <&vreg_s7b_0p9>;
+ vddrfa0p8-supply = <&vreg_s7b_0p9>;
+ vddrfa1p7-supply = <&vreg_s1b_1p8>;
+ vddrfa1p2-supply = <&vreg_s8b_1p2>;
+ vddrfa2p2-supply = <&vreg_s1c_2p2>;
+ vddasd-supply = <&vreg_l11c_2p8>;
+ max-speed = <3200000>;
+ firmware-name = "msnv11.bin";
+ };
+ };