diff options
Diffstat (limited to '')
| -rw-r--r-- | Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml | 279 |
1 files changed, 279 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml b/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml new file mode 100644 index 000000000..821974815 --- /dev/null +++ b/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml @@ -0,0 +1,279 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/ti,k3-am654-cpsw-nuss.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: The TI AM654x/J721E/AM642x SoC Gigabit Ethernet MAC (Media Access Controller) + +maintainers: + - Grygorii Strashko <grygorii.strashko@ti.com> + - Sekhar Nori <nsekhar@ti.com> + +description: + The TI AM654x/J721E SoC Gigabit Ethernet MAC (CPSW2G NUSS) has two ports + (one external) and provides Ethernet packet communication for the device. + The TI AM642x SoC Gigabit Ethernet MAC (CPSW3G NUSS) has three ports + (two external) and provides Ethernet packet communication and switching. + + The internal Communications Port Programming Interface (CPPI5) (Host port 0). + Host Port 0 CPPI Packet Streaming Interface interface supports 8 TX channels + and one RX channels and operating by NAVSS Unified DMA Peripheral Root + Complex (UDMA-P) controller. + + CPSWxG features + updated Address Lookup Engine (ALE). + priority level Quality Of Service (QOS) support (802.1p) + Support for Audio/Video Bridging (P802.1Qav/D6.0) + Support for IEEE 1588 Clock Synchronization (2008 Annex D, Annex E and Annex F) + Flow Control (802.3x) Support + Time Sensitive Network Support + IEEE P902.3br/D2.0 Interspersing Express Traffic + IEEE 802.1Qbv/D2.2 Enhancements for Scheduled Traffic + Configurable number of addresses plus VLANs + Configurable number of classifier/policers + VLAN support, 802.1Q compliant, Auto add port VLAN for untagged frames on + ingress, Auto VLAN removal on egress and auto pad to minimum frame size. + RX/TX csum offload + Management Data Input/Output (MDIO) interface for PHYs management + RMII/RGMII Interfaces support + new version of Common Platform Time Sync (CPTS) + + The CPSWxG NUSS is integrated into + device MCU domain named MCU_CPSW0 on AM654x/J721E SoC. + device MAIN domain named CPSW0 on AM642x SoC. + + Specifications can be found at + https://www.ti.com/lit/pdf/spruid7 + https://www.ti.com/lit/zip/spruil1 + https://www.ti.com/lit/pdf/spruim2 + +properties: + "#address-cells": true + "#size-cells": true + + compatible: + enum: + - ti,am654-cpsw-nuss + - ti,j7200-cpswxg-nuss + - ti,j721e-cpsw-nuss + - ti,am642-cpsw-nuss + + reg: + maxItems: 1 + description: + The physical base address and size of full the CPSWxG NUSS IO range + + reg-names: + items: + - const: cpsw_nuss + + ranges: true + + dma-coherent: true + + clocks: + maxItems: 1 + description: CPSWxG NUSS functional clock + + clock-names: + items: + - const: fck + + assigned-clock-parents: true + + assigned-clocks: true + + power-domains: + maxItems: 1 + + dmas: + maxItems: 9 + + dma-names: + items: + - const: tx0 + - const: tx1 + - const: tx2 + - const: tx3 + - const: tx4 + - const: tx5 + - const: tx6 + - const: tx7 + - const: rx + + ethernet-ports: + type: object + properties: + '#address-cells': + const: 1 + '#size-cells': + const: 0 + + patternProperties: + "^port@[1-4]$": + type: object + description: CPSWxG NUSS external ports + + $ref: ethernet-controller.yaml# + unevaluatedProperties: false + + properties: + reg: + minimum: 1 + maximum: 4 + description: CPSW port number + + phys: + maxItems: 1 + description: phandle on phy-gmii-sel PHY + + label: + description: label associated with this port + + ti,mac-only: + $ref: /schemas/types.yaml#/definitions/flag + description: + Specifies the port works in mac-only mode. + + ti,syscon-efuse: + $ref: /schemas/types.yaml#/definitions/phandle-array + items: + - items: + - description: Phandle to the system control device node which + provides access to efuse + - description: offset to efuse registers??? + description: + Phandle to the system control device node which provides access + to efuse IO range with MAC addresses + + required: + - reg + - phys + + additionalProperties: false + +patternProperties: + "^mdio@[0-9a-f]+$": + type: object + $ref: "ti,davinci-mdio.yaml#" + + description: + CPSW MDIO bus. + + "^cpts@[0-9a-f]+": + type: object + $ref: "ti,k3-am654-cpts.yaml#" + description: + CPSW Common Platform Time Sync (CPTS) module. + +required: + - compatible + - reg + - reg-names + - ranges + - clocks + - clock-names + - power-domains + - dmas + - dma-names + - '#address-cells' + - '#size-cells' + +allOf: + - if: + not: + properties: + compatible: + contains: + const: ti,j7200-cpswxg-nuss + then: + properties: + ethernet-ports: + patternProperties: + "^port@[3-4]$": false + +additionalProperties: false + +examples: + - | + #include <dt-bindings/pinctrl/k3.h> + #include <dt-bindings/soc/ti,sci_pm_domain.h> + #include <dt-bindings/net/ti-dp83867.h> + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + bus { + #address-cells = <2>; + #size-cells = <2>; + + mcu_cpsw: ethernet@46000000 { + compatible = "ti,am654-cpsw-nuss"; + #address-cells = <2>; + #size-cells = <2>; + reg = <0x0 0x46000000 0x0 0x200000>; + reg-names = "cpsw_nuss"; + ranges = <0x0 0x0 0x0 0x46000000 0x0 0x200000>; + dma-coherent; + clocks = <&k3_clks 5 10>; + clock-names = "fck"; + power-domains = <&k3_pds 5 TI_SCI_PD_EXCLUSIVE>; + pinctrl-names = "default"; + pinctrl-0 = <&mcu_cpsw_pins_default &mcu_mdio_pins_default>; + + dmas = <&mcu_udmap 0xf000>, + <&mcu_udmap 0xf001>, + <&mcu_udmap 0xf002>, + <&mcu_udmap 0xf003>, + <&mcu_udmap 0xf004>, + <&mcu_udmap 0xf005>, + <&mcu_udmap 0xf006>, + <&mcu_udmap 0xf007>, + <&mcu_udmap 0x7000>; + dma-names = "tx0", "tx1", "tx2", "tx3", "tx4", "tx5", "tx6", "tx7", + "rx"; + + ethernet-ports { + #address-cells = <1>; + #size-cells = <0>; + + cpsw_port1: port@1 { + reg = <1>; + ti,mac-only; + label = "port1"; + ti,syscon-efuse = <&mcu_conf 0x200>; + phys = <&phy_gmii_sel 1>; + + phy-mode = "rgmii-rxid"; + phy-handle = <&phy0>; + }; + }; + + davinci_mdio: mdio@f00 { + compatible = "ti,cpsw-mdio","ti,davinci_mdio"; + reg = <0x0 0xf00 0x0 0x100>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&k3_clks 5 10>; + clock-names = "fck"; + bus_freq = <1000000>; + + phy0: ethernet-phy@0 { + reg = <0>; + ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; + ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; + }; + }; + }; + + cpts@3d000 { + compatible = "ti,am65-cpts"; + reg = <0x0 0x3d000 0x0 0x400>; + clocks = <&k3_clks 18 2>; + clock-names = "cpts"; + interrupts-extended = <&gic500 GIC_SPI 858 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "cpts"; + ti,cpts-ext-ts-inputs = <4>; + ti,cpts-periodic-outputs = <2>; + }; + }; |