diff options
Diffstat (limited to 'Documentation/devicetree/bindings/pci/faraday,ftpci100.yaml')
| -rw-r--r-- | Documentation/devicetree/bindings/pci/faraday,ftpci100.yaml | 174 |
1 files changed, 174 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/pci/faraday,ftpci100.yaml b/Documentation/devicetree/bindings/pci/faraday,ftpci100.yaml new file mode 100644 index 000000000..92efbf0f1 --- /dev/null +++ b/Documentation/devicetree/bindings/pci/faraday,ftpci100.yaml @@ -0,0 +1,174 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/faraday,ftpci100.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Faraday Technology FTPCI100 PCI Host Bridge + +maintainers: + - Linus Walleij <linus.walleij@linaro.org> + +description: | + This PCI bridge is found inside that Cortina Systems Gemini SoC platform and + is a generic IP block from Faraday Technology. It exists in two variants: + plain and dual PCI. The plain version embeds a cascading interrupt controller + into the host bridge. The dual version routes the interrupts to the host + chips interrupt controller. + The host controller appear on the PCI bus with vendor ID 0x159b (Faraday + Technology) and product ID 0x4321. + I/O space considerations: + The plain variant has 128MiB of non-prefetchable memory space, whereas the + "dual" variant has 64MiB. Take this into account when describing the ranges. + + Interrupt map considerations: + + The "dual" variant will get INT A, B, C, D from the system interrupt controller + and should point to respective interrupt in that controller in its interrupt-map. + + The code which is the only documentation of how the Faraday PCI (the non-dual + variant) interrupts assigns the default interrupt mapping/swizzling has + typically been like this, doing the swizzling on the interrupt controller side + rather than in the interconnect: + + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = + <0x4800 0 0 1 &pci_intc 0>, /* Slot 9 */ + <0x4800 0 0 2 &pci_intc 1>, + <0x4800 0 0 3 &pci_intc 2>, + <0x4800 0 0 4 &pci_intc 3>, + <0x5000 0 0 1 &pci_intc 1>, /* Slot 10 */ + <0x5000 0 0 2 &pci_intc 2>, + <0x5000 0 0 3 &pci_intc 3>, + <0x5000 0 0 4 &pci_intc 0>, + <0x5800 0 0 1 &pci_intc 2>, /* Slot 11 */ + <0x5800 0 0 2 &pci_intc 3>, + <0x5800 0 0 3 &pci_intc 0>, + <0x5800 0 0 4 &pci_intc 1>, + <0x6000 0 0 1 &pci_intc 3>, /* Slot 12 */ + <0x6000 0 0 2 &pci_intc 0>, + <0x6000 0 0 3 &pci_intc 1>, + <0x6000 0 0 4 &pci_intc 2>; + +allOf: + - $ref: /schemas/pci/pci-bus.yaml# + +properties: + compatible: + oneOf: + - items: + - const: cortina,gemini-pci + - const: faraday,ftpci100 + - items: + - const: cortina,gemini-pci-dual + - const: faraday,ftpci100-dual + - const: faraday,ftpci100 + - const: faraday,ftpci100-dual + + reg: + maxItems: 1 + + "#address-cells": + const: 3 + + "#interrupt-cells": + const: 1 + + ranges: + minItems: 2 + + dma-ranges: + minItems: 3 + description: | + three ranges for the inbound memory region. The ranges must + be aligned to a 1MB boundary, and may be 1MB, 2MB, 4MB, 8MB, 16MB, 32MB, 64MB, + 128MB, 256MB, 512MB, 1GB or 2GB in size. The memory should be marked as + pre-fetchable. + + clocks: + items: + - description: peripheral clock (PCLK) + - description: PCI clock (PCICLK). + description: | + If these are not present, they are assumed to be + hard-wired enabled and always on. The PCI clock will be 33 or 66 MHz. + + clock-names: + items: + - const: PCLK + - const: PCICLK + + interrupt-controller: + type: object + +required: + - reg + - compatible + - "#interrupt-cells" + - interrupt-map-mask + - interrupt-map + - dma-ranges + +if: + properties: + compatible: + contains: + const: faraday,ftpci100 +then: + required: + - interrupt-controller + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + pci@50000000 { + compatible = "cortina,gemini-pci", "faraday,ftpci100"; + reg = <0x50000000 0x100>; + device_type = "pci"; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + + bus-range = <0x00 0xff>; + ranges = /* 1MiB I/O space 0x50000000-0x500fffff */ + <0x01000000 0 0 0x50000000 0 0x00100000>, + /* 128MiB non-prefetchable memory 0x58000000-0x5fffffff */ + <0x02000000 0 0x58000000 0x58000000 0 0x08000000>; + + /* DMA ranges */ + dma-ranges = + /* 128MiB at 0x00000000-0x07ffffff */ + <0x02000000 0 0x00000000 0x00000000 0 0x08000000>, + /* 64MiB at 0x00000000-0x03ffffff */ + <0x02000000 0 0x00000000 0x00000000 0 0x04000000>, + /* 64MiB at 0x00000000-0x03ffffff */ + <0x02000000 0 0x00000000 0x00000000 0 0x04000000>; + + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = + <0x4800 0 0 1 &pci_intc 0>, /* Slot 9 */ + <0x4800 0 0 2 &pci_intc 1>, + <0x4800 0 0 3 &pci_intc 2>, + <0x4800 0 0 4 &pci_intc 3>, + <0x5000 0 0 1 &pci_intc 1>, /* Slot 10 */ + <0x5000 0 0 2 &pci_intc 2>, + <0x5000 0 0 3 &pci_intc 3>, + <0x5000 0 0 4 &pci_intc 0>, + <0x5800 0 0 1 &pci_intc 2>, /* Slot 11 */ + <0x5800 0 0 2 &pci_intc 3>, + <0x5800 0 0 3 &pci_intc 0>, + <0x5800 0 0 4 &pci_intc 1>, + <0x6000 0 0 1 &pci_intc 3>, /* Slot 12 */ + <0x6000 0 0 2 &pci_intc 0>, + <0x6000 0 0 3 &pci_intc 0>, + <0x6000 0 0 4 &pci_intc 0>; + pci_intc: interrupt-controller { + interrupt-parent = <&intcon>; + interrupt-controller; + interrupts = <8 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <0>; + #interrupt-cells = <1>; + }; + }; |