diff options
Diffstat (limited to '')
| -rw-r--r-- | Documentation/devicetree/bindings/pci/hisilicon-histb-pcie.txt | 69 |
1 files changed, 69 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/pci/hisilicon-histb-pcie.txt b/Documentation/devicetree/bindings/pci/hisilicon-histb-pcie.txt new file mode 100644 index 000000000..5f0cf6c2f --- /dev/null +++ b/Documentation/devicetree/bindings/pci/hisilicon-histb-pcie.txt @@ -0,0 +1,69 @@ +HiSilicon STB PCIe host bridge DT description + +The HiSilicon STB PCIe host controller is based on the DesignWare PCIe core. +It shares common functions with the DesignWare PCIe core driver and inherits +common properties defined in +Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml. + +Additional properties are described here: + +Required properties +- compatible: Should be one of the following strings: + "hisilicon,hi3798cv200-pcie" +- reg: Should contain sysctl, rc_dbi, config registers location and length. +- reg-names: Must include the following entries: + "control": control registers of PCIe controller; + "rc-dbi": configuration space of PCIe controller; + "config": configuration transaction space of PCIe controller. +- bus-range: PCI bus numbers covered. +- interrupts: MSI interrupt. +- interrupt-names: Must include "msi" entries. +- clocks: List of phandle and clock specifier pairs as listed in clock-names + property. +- clock-name: Must include the following entries: + "aux": auxiliary gate clock; + "pipe": pipe gate clock; + "sys": sys gate clock; + "bus": bus gate clock. +- resets: List of phandle and reset specifier pairs as listed in reset-names + property. +- reset-names: Must include the following entries: + "soft": soft reset; + "sys": sys reset; + "bus": bus reset. + +Optional properties: +- reset-gpios: The gpio to generate PCIe PERST# assert and deassert signal. +- vpcie-supply: The regulator in charge of PCIe port power. +- phys: List of phandle and phy mode specifier, should be 0. +- phy-names: Must be "phy". + +Example: + pcie@f9860000 { + compatible = "hisilicon,hi3798cv200-pcie"; + reg = <0xf9860000 0x1000>, + <0xf0000000 0x2000>, + <0xf2000000 0x01000000>; + reg-names = "control", "rc-dbi", "config"; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + bus-range = <0 15>; + num-lanes = <1>; + ranges=<0x81000000 0 0 0xf4000000 0 0x00010000 + 0x82000000 0 0xf3000000 0xf3000000 0 0x01000000>; + interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&crg PCIE_AUX_CLK>, + <&crg PCIE_PIPE_CLK>, + <&crg PCIE_SYS_CLK>, + <&crg PCIE_BUS_CLK>; + clock-names = "aux", "pipe", "sys", "bus"; + resets = <&crg 0x18c 6>, <&crg 0x18c 5>, <&crg 0x18c 4>; + reset-names = "soft", "sys", "bus"; + phys = <&combphy1 PHY_TYPE_PCIE>; + phy-names = "phy"; + }; |