diff options
Diffstat (limited to '')
9 files changed, 530 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/perf/apm-xgene-pmu.txt b/Documentation/devicetree/bindings/perf/apm-xgene-pmu.txt new file mode 100644 index 000000000..afb11cf69 --- /dev/null +++ b/Documentation/devicetree/bindings/perf/apm-xgene-pmu.txt @@ -0,0 +1,112 @@ +* APM X-Gene SoC PMU bindings + +This is APM X-Gene SoC PMU (Performance Monitoring Unit) module. +The following PMU devices are supported: + + L3C - L3 cache controller + IOB - IO bridge + MCB - Memory controller bridge + MC - Memory controller + +The following section describes the SoC PMU DT node binding. + +Required properties: +- compatible : Shall be "apm,xgene-pmu" for revision 1 or + "apm,xgene-pmu-v2" for revision 2. +- regmap-csw : Regmap of the CPU switch fabric (CSW) resource. +- regmap-mcba : Regmap of the MCB-A (memory bridge) resource. +- regmap-mcbb : Regmap of the MCB-B (memory bridge) resource. +- reg : First resource shall be the CPU bus PMU resource. +- interrupts : Interrupt-specifier for PMU IRQ. + +Required properties for L3C subnode: +- compatible : Shall be "apm,xgene-pmu-l3c". +- reg : First resource shall be the L3C PMU resource. + +Required properties for IOB subnode: +- compatible : Shall be "apm,xgene-pmu-iob". +- reg : First resource shall be the IOB PMU resource. + +Required properties for MCB subnode: +- compatible : Shall be "apm,xgene-pmu-mcb". +- reg : First resource shall be the MCB PMU resource. +- enable-bit-index : The bit indicates if the according MCB is enabled. + +Required properties for MC subnode: +- compatible : Shall be "apm,xgene-pmu-mc". +- reg : First resource shall be the MC PMU resource. +- enable-bit-index : The bit indicates if the according MC is enabled. + +Example: + csw: csw@7e200000 { + compatible = "apm,xgene-csw", "syscon"; + reg = <0x0 0x7e200000 0x0 0x1000>; + }; + + mcba: mcba@7e700000 { + compatible = "apm,xgene-mcb", "syscon"; + reg = <0x0 0x7e700000 0x0 0x1000>; + }; + + mcbb: mcbb@7e720000 { + compatible = "apm,xgene-mcb", "syscon"; + reg = <0x0 0x7e720000 0x0 0x1000>; + }; + + pmu: pmu@78810000 { + compatible = "apm,xgene-pmu-v2"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + regmap-csw = <&csw>; + regmap-mcba = <&mcba>; + regmap-mcbb = <&mcbb>; + reg = <0x0 0x78810000 0x0 0x1000>; + interrupts = <0x0 0x22 0x4>; + + pmul3c@7e610000 { + compatible = "apm,xgene-pmu-l3c"; + reg = <0x0 0x7e610000 0x0 0x1000>; + }; + + pmuiob@7e940000 { + compatible = "apm,xgene-pmu-iob"; + reg = <0x0 0x7e940000 0x0 0x1000>; + }; + + pmucmcb@7e710000 { + compatible = "apm,xgene-pmu-mcb"; + reg = <0x0 0x7e710000 0x0 0x1000>; + enable-bit-index = <0>; + }; + + pmucmcb@7e730000 { + compatible = "apm,xgene-pmu-mcb"; + reg = <0x0 0x7e730000 0x0 0x1000>; + enable-bit-index = <1>; + }; + + pmucmc@7e810000 { + compatible = "apm,xgene-pmu-mc"; + reg = <0x0 0x7e810000 0x0 0x1000>; + enable-bit-index = <0>; + }; + + pmucmc@7e850000 { + compatible = "apm,xgene-pmu-mc"; + reg = <0x0 0x7e850000 0x0 0x1000>; + enable-bit-index = <1>; + }; + + pmucmc@7e890000 { + compatible = "apm,xgene-pmu-mc"; + reg = <0x0 0x7e890000 0x0 0x1000>; + enable-bit-index = <2>; + }; + + pmucmc@7e8d0000 { + compatible = "apm,xgene-pmu-mc"; + reg = <0x0 0x7e8d0000 0x0 0x1000>; + enable-bit-index = <3>; + }; + }; diff --git a/Documentation/devicetree/bindings/perf/arm,ccn.yaml b/Documentation/devicetree/bindings/perf/arm,ccn.yaml new file mode 100644 index 000000000..0b0bb2091 --- /dev/null +++ b/Documentation/devicetree/bindings/perf/arm,ccn.yaml @@ -0,0 +1,40 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/perf/arm,ccn.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ARM CCN (Cache Coherent Network) Performance Monitors + +maintainers: + - Robin Murphy <robin.murphy@arm.com> + +properties: + compatible: + enum: + - arm,ccn-502 + - arm,ccn-504 + - arm,ccn-508 + - arm,ccn-512 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + +additionalProperties: false + +examples: + - | + ccn@20000000 { + compatible = "arm,ccn-504"; + reg = <0x20000000 0x1000000>; + interrupts = <0 181 4>; + }; +... diff --git a/Documentation/devicetree/bindings/perf/arm,cmn.yaml b/Documentation/devicetree/bindings/perf/arm,cmn.yaml new file mode 100644 index 000000000..2e51072e7 --- /dev/null +++ b/Documentation/devicetree/bindings/perf/arm,cmn.yaml @@ -0,0 +1,69 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright 2020 Arm Ltd. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/perf/arm,cmn.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Arm CMN (Coherent Mesh Network) Performance Monitors + +maintainers: + - Robin Murphy <robin.murphy@arm.com> + +properties: + compatible: + enum: + - arm,cmn-600 + - arm,cmn-650 + - arm,cmn-700 + - arm,ci-700 + + reg: + items: + - description: Physical address of the base (PERIPHBASE) and + size of the configuration address space. + + interrupts: + minItems: 1 + items: + - description: Overflow interrupt for DTC0 + - description: Overflow interrupt for DTC1 + - description: Overflow interrupt for DTC2 + - description: Overflow interrupt for DTC3 + description: One interrupt for each DTC domain implemented must + be specified, in order. DTC0 is always present. + + arm,root-node: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Offset from PERIPHBASE of CMN-600's configuration + discovery node (see TRM definition of ROOTNODEBASE). Not + relevant for newer CMN/CI products. + +required: + - compatible + - reg + - interrupts + +if: + properties: + compatible: + contains: + const: arm,cmn-600 +then: + required: + - arm,root-node + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + pmu@50000000 { + compatible = "arm,cmn-600"; + reg = <0x50000000 0x4000000>; + /* 4x2 mesh with one DTC, and CFG node at 0,1,1,0 */ + interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; + arm,root-node = <0x104000>; + }; +... diff --git a/Documentation/devicetree/bindings/perf/arm,dsu-pmu.yaml b/Documentation/devicetree/bindings/perf/arm,dsu-pmu.yaml new file mode 100644 index 000000000..c87821be1 --- /dev/null +++ b/Documentation/devicetree/bindings/perf/arm,dsu-pmu.yaml @@ -0,0 +1,47 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright 2021 Arm Ltd. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/perf/arm,dsu-pmu.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ARM DynamIQ Shared Unit (DSU) Performance Monitor Unit (PMU) + +maintainers: + - Suzuki K Poulose <suzuki.poulose@arm.com> + - Robin Murphy <robin.murphy@arm.com> + +description: + ARM DynamIQ Shared Unit (DSU) integrates one or more CPU cores with a shared + L3 memory system, control logic and external interfaces to form a multicore + cluster. The PMU enables gathering various statistics on the operation of the + DSU. The PMU provides independent 32-bit counters that can count any of the + supported events, along with a 64-bit cycle counter. The PMU is accessed via + CPU system registers and has no MMIO component. + +properties: + compatible: + oneOf: + - const: arm,dsu-pmu + - items: + - const: arm,dsu-110-pmu + - const: arm,dsu-pmu + + interrupts: + items: + - description: nCLUSTERPMUIRQ interrupt + + cpus: + $ref: /schemas/types.yaml#/definitions/phandle-array + minItems: 1 + maxItems: 12 + items: + maxItems: 1 + description: List of phandles for the CPUs connected to this DSU instance. + +required: + - compatible + - interrupts + - cpus + +additionalProperties: false diff --git a/Documentation/devicetree/bindings/perf/arm,smmu-v3-pmcg.yaml b/Documentation/devicetree/bindings/perf/arm,smmu-v3-pmcg.yaml new file mode 100644 index 000000000..a4b53a6a1 --- /dev/null +++ b/Documentation/devicetree/bindings/perf/arm,smmu-v3-pmcg.yaml @@ -0,0 +1,70 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/perf/arm,smmu-v3-pmcg.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Arm SMMUv3 Performance Monitor Counter Group + +maintainers: + - Will Deacon <will@kernel.org> + - Robin Murphy <robin.murphy@arm.com> + +description: | + An SMMUv3 may have several Performance Monitor Counter Group (PMCG). + They are standalone performance monitoring units that support both + architected and IMPLEMENTATION DEFINED event counters. + +properties: + $nodename: + pattern: "^pmu@[0-9a-f]*" + compatible: + oneOf: + - items: + - const: arm,mmu-600-pmcg + - const: arm,smmu-v3-pmcg + - const: arm,smmu-v3-pmcg + + reg: + items: + - description: Register page 0 + - description: Register page 1, if SMMU_PMCG_CFGR.RELOC_CTRS = 1 + minItems: 1 + + interrupts: + maxItems: 1 + + msi-parent: true + +required: + - compatible + - reg + +anyOf: + - required: + - interrupts + - required: + - msi-parent + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + + pmu@2b420000 { + compatible = "arm,smmu-v3-pmcg"; + reg = <0x2b420000 0x1000>, + <0x2b430000 0x1000>; + interrupts = <GIC_SPI 80 IRQ_TYPE_EDGE_RISING>; + msi-parent = <&its 0xff0000>; + }; + + pmu@2b440000 { + compatible = "arm,smmu-v3-pmcg"; + reg = <0x2b440000 0x1000>, + <0x2b450000 0x1000>; + interrupts = <GIC_SPI 81 IRQ_TYPE_EDGE_RISING>; + msi-parent = <&its 0xff0000>; + }; diff --git a/Documentation/devicetree/bindings/perf/fsl-imx-ddr.yaml b/Documentation/devicetree/bindings/perf/fsl-imx-ddr.yaml new file mode 100644 index 000000000..80a923853 --- /dev/null +++ b/Documentation/devicetree/bindings/perf/fsl-imx-ddr.yaml @@ -0,0 +1,52 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/perf/fsl-imx-ddr.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale(NXP) IMX8 DDR performance monitor + +maintainers: + - Frank Li <frank.li@nxp.com> + +properties: + compatible: + oneOf: + - enum: + - fsl,imx8-ddr-pmu + - fsl,imx8m-ddr-pmu + - fsl,imx8mq-ddr-pmu + - fsl,imx8mm-ddr-pmu + - fsl,imx8mn-ddr-pmu + - fsl,imx8mp-ddr-pmu + - items: + - enum: + - fsl,imx8mm-ddr-pmu + - fsl,imx8mn-ddr-pmu + - fsl,imx8mq-ddr-pmu + - fsl,imx8mp-ddr-pmu + - const: fsl,imx8m-ddr-pmu + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + ddr-pmu@5c020000 { + compatible = "fsl,imx8-ddr-pmu"; + reg = <0x5c020000 0x10000>; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>; + }; diff --git a/Documentation/devicetree/bindings/perf/marvell-cn10k-ddr.yaml b/Documentation/devicetree/bindings/perf/marvell-cn10k-ddr.yaml new file mode 100644 index 000000000..a18dd0a8c --- /dev/null +++ b/Documentation/devicetree/bindings/perf/marvell-cn10k-ddr.yaml @@ -0,0 +1,37 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/perf/marvell-cn10k-ddr.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Marvell CN10K DDR performance monitor + +maintainers: + - Bharat Bhushan <bbhushan2@marvell.com> + +properties: + compatible: + items: + - enum: + - marvell,cn10k-ddr-pmu + + reg: + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + bus { + #address-cells = <2>; + #size-cells = <2>; + + pmu@87e1c0000000 { + compatible = "marvell,cn10k-ddr-pmu"; + reg = <0x87e1 0xc0000000 0x0 0x10000>; + }; + }; diff --git a/Documentation/devicetree/bindings/perf/marvell-cn10k-tad.yaml b/Documentation/devicetree/bindings/perf/marvell-cn10k-tad.yaml new file mode 100644 index 000000000..362142252 --- /dev/null +++ b/Documentation/devicetree/bindings/perf/marvell-cn10k-tad.yaml @@ -0,0 +1,63 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/perf/marvell-cn10k-tad.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Marvell CN10K LLC-TAD performance monitor + +maintainers: + - Bhaskara Budiredla <bbudiredla@marvell.com> + +description: | + The Tag-and-Data units (TADs) maintain coherence and contain CN10K + shared on-chip last level cache (LLC). The tad pmu measures the + performance of last-level cache. Each tad pmu supports up to eight + counters. + + The DT setup comprises of number of tad blocks, the sizes of pmu + regions, tad blocks and overall base address of the HW. + +properties: + compatible: + const: marvell,cn10k-tad-pmu + + reg: + maxItems: 1 + + marvell,tad-cnt: + description: specifies the number of tads on the soc + $ref: /schemas/types.yaml#/definitions/uint32 + + marvell,tad-page-size: + description: specifies the size of each tad page + $ref: /schemas/types.yaml#/definitions/uint32 + + marvell,tad-pmu-page-size: + description: specifies the size of page that the pmu uses + $ref: /schemas/types.yaml#/definitions/uint32 + +required: + - compatible + - reg + - marvell,tad-cnt + - marvell,tad-page-size + - marvell,tad-pmu-page-size + +additionalProperties: false + +examples: + - | + + tad { + #address-cells = <2>; + #size-cells = <2>; + + tad_pmu@80000000 { + compatible = "marvell,cn10k-tad-pmu"; + reg = <0x87e2 0x80000000 0x0 0x1000>; + marvell,tad-cnt = <1>; + marvell,tad-page-size = <0x1000>; + marvell,tad-pmu-page-size = <0x1000>; + }; + }; diff --git a/Documentation/devicetree/bindings/perf/spe-pmu.yaml b/Documentation/devicetree/bindings/perf/spe-pmu.yaml new file mode 100644 index 000000000..7d74152f4 --- /dev/null +++ b/Documentation/devicetree/bindings/perf/spe-pmu.yaml @@ -0,0 +1,40 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/perf/spe-pmu.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ARMv8.2 Statistical Profiling Extension (SPE) Performance Monitor Units (PMU) + +maintainers: + - Will Deacon <will@kernel.org> + +description: + ARMv8.2 introduces the optional Statistical Profiling Extension for collecting + performance sample data using an in-memory trace buffer. + +properties: + compatible: + const: arm,statistical-profiling-extension-v1 + + interrupts: + maxItems: 1 + description: | + The PPI to signal SPE events. For heterogeneous systems where SPE is only + supported on a subset of the CPUs, please consult the arm,gic-v3 binding + for details on describing a PPI partition. + +additionalProperties: false + +required: + - compatible + - interrupts + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + spe-pmu { + compatible = "arm,statistical-profiling-extension-v1"; + interrupts = <GIC_PPI 5 IRQ_TYPE_LEVEL_HIGH>; + }; |