diff options
Diffstat (limited to 'Documentation/devicetree/bindings/phy/mediatek,xsphy.yaml')
| -rw-r--r-- | Documentation/devicetree/bindings/phy/mediatek,xsphy.yaml | 199 |
1 files changed, 199 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/phy/mediatek,xsphy.yaml b/Documentation/devicetree/bindings/phy/mediatek,xsphy.yaml new file mode 100644 index 000000000..a9e3139fd --- /dev/null +++ b/Documentation/devicetree/bindings/phy/mediatek,xsphy.yaml @@ -0,0 +1,199 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (c) 2020 MediaTek +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/phy/mediatek,xsphy.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek XS-PHY Controller + +maintainers: + - Chunfeng Yun <chunfeng.yun@mediatek.com> + +description: | + The XS-PHY controller supports physical layer functionality for USB3.1 + GEN2 controller on MediaTek SoCs. + + Banks layout of xsphy + ---------------------------------- + port offset bank + u2 port0 0x0000 MISC + 0x0100 FMREG + 0x0300 U2PHY_COM + u2 port1 0x1000 MISC + 0x1100 FMREG + 0x1300 U2PHY_COM + u2 port2 0x2000 MISC + ... + u31 common 0x3000 DIG_GLB + 0x3100 PHYA_GLB + u31 port0 0x3400 DIG_LN_TOP + 0x3500 DIG_LN_TX0 + 0x3600 DIG_LN_RX0 + 0x3700 DIG_LN_DAIF + 0x3800 PHYA_LN + u31 port1 0x3a00 DIG_LN_TOP + 0x3b00 DIG_LN_TX0 + 0x3c00 DIG_LN_RX0 + 0x3d00 DIG_LN_DAIF + 0x3e00 PHYA_LN + ... + DIG_GLB & PHYA_GLB are shared by U31 ports. + +properties: + $nodename: + pattern: "^xs-phy@[0-9a-f]+$" + + compatible: + items: + - enum: + - mediatek,mt3611-xsphy + - mediatek,mt3612-xsphy + - const: mediatek,xsphy + + reg: + description: + Register shared by multiple U3 ports, exclude port's private register, + if only U2 ports provided, shouldn't use the property. + maxItems: 1 + + "#address-cells": + enum: [1, 2] + + "#size-cells": + enum: [1, 2] + + ranges: true + + mediatek,src-ref-clk-mhz: + description: + Frequency of reference clock for slew rate calibrate + default: 26 + + mediatek,src-coef: + description: + Coefficient for slew rate calibrate, depends on SoC process + $ref: /schemas/types.yaml#/definitions/uint32 + default: 17 + +# Required child node: +patternProperties: + "^usb-phy@[0-9a-f]+$": + type: object + description: + A sub-node is required for each port the controller provides. + Address range information including the usual 'reg' property + is used inside these nodes to describe the controller's topology. + + properties: + reg: + maxItems: 1 + + clocks: + items: + - description: Reference clock, (HS is 48Mhz, SS/P is 24~27Mhz) + + clock-names: + items: + - const: ref + + "#phy-cells": + const: 1 + description: | + The cells contain the following arguments. + + - description: The PHY type + enum: + - PHY_TYPE_USB2 + - PHY_TYPE_USB3 + + # The following optional vendor properties are only for debug or HQA test + mediatek,eye-src: + description: + The value of slew rate calibrate (U2 phy) + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 1 + maximum: 7 + + mediatek,eye-vrt: + description: + The selection of VRT reference voltage (U2 phy) + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 1 + maximum: 7 + + mediatek,eye-term: + description: + The selection of HS_TX TERM reference voltage (U2 phy) + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 1 + maximum: 7 + + mediatek,efuse-intr: + description: + The selection of Internal Resistor (U2/U3 phy) + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 1 + maximum: 63 + + mediatek,efuse-tx-imp: + description: + The selection of TX Impedance (U3 phy) + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 1 + maximum: 31 + + mediatek,efuse-rx-imp: + description: + The selection of RX Impedance (U3 phy) + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 1 + maximum: 31 + + required: + - reg + - clocks + - clock-names + - "#phy-cells" + + additionalProperties: false + +required: + - compatible + - "#address-cells" + - "#size-cells" + - ranges + +additionalProperties: false + +examples: + - | + #include <dt-bindings/phy/phy.h> + + u3phy: xs-phy@11c40000 { + compatible = "mediatek,mt3611-xsphy", "mediatek,xsphy"; + reg = <0x11c43000 0x0200>; + mediatek,src-ref-clk-mhz = <26>; + mediatek,src-coef = <17>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + u2port0: usb-phy@11c40000 { + reg = <0x11c40000 0x0400>; + clocks = <&clk48m>; + clock-names = "ref"; + mediatek,eye-src = <4>; + #phy-cells = <1>; + }; + + u3port0: usb-phy@11c43000 { + reg = <0x11c43400 0x0500>; + clocks = <&clk26m>; + clock-names = "ref"; + mediatek,efuse-intr = <28>; + #phy-cells = <1>; + }; + }; + +... |