summaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree/bindings/pinctrl/allwinner,sun4i-a10-pinctrl.yaml
diff options
context:
space:
mode:
Diffstat (limited to '')
-rw-r--r--Documentation/devicetree/bindings/pinctrl/allwinner,sun4i-a10-pinctrl.yaml302
1 files changed, 302 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/pinctrl/allwinner,sun4i-a10-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/allwinner,sun4i-a10-pinctrl.yaml
new file mode 100644
index 000000000..1e3c8de6c
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/allwinner,sun4i-a10-pinctrl.yaml
@@ -0,0 +1,302 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/allwinner,sun4i-a10-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A10 Pin Controller
+
+maintainers:
+ - Chen-Yu Tsai <wens@csie.org>
+ - Maxime Ripard <mripard@kernel.org>
+
+properties:
+ "#gpio-cells":
+ const: 3
+ description:
+ GPIO consumers must use three arguments, first the number of the
+ bank, then the pin number inside that bank, and finally the GPIO
+ flags.
+
+ "#interrupt-cells":
+ const: 3
+ description:
+ Interrupts consumers must use three arguments, first the number
+ of the bank, then the pin number inside that bank, and finally
+ the interrupts flags.
+
+ compatible:
+ enum:
+ - allwinner,sun4i-a10-pinctrl
+ - allwinner,sun5i-a10s-pinctrl
+ - allwinner,sun5i-a13-pinctrl
+ - allwinner,sun6i-a31-pinctrl
+ - allwinner,sun6i-a31-r-pinctrl
+ - allwinner,sun6i-a31s-pinctrl
+ - allwinner,sun7i-a20-pinctrl
+ - allwinner,sun8i-a23-pinctrl
+ - allwinner,sun8i-a23-r-pinctrl
+ - allwinner,sun8i-a33-pinctrl
+ - allwinner,sun8i-a83t-pinctrl
+ - allwinner,sun8i-a83t-r-pinctrl
+ - allwinner,sun8i-h3-pinctrl
+ - allwinner,sun8i-h3-r-pinctrl
+ - allwinner,sun8i-r40-pinctrl
+ - allwinner,sun8i-v3-pinctrl
+ - allwinner,sun8i-v3s-pinctrl
+ - allwinner,sun9i-a80-pinctrl
+ - allwinner,sun9i-a80-r-pinctrl
+ - allwinner,sun20i-d1-pinctrl
+ - allwinner,sun50i-a64-pinctrl
+ - allwinner,sun50i-a64-r-pinctrl
+ - allwinner,sun50i-a100-pinctrl
+ - allwinner,sun50i-a100-r-pinctrl
+ - allwinner,sun50i-h5-pinctrl
+ - allwinner,sun50i-h6-pinctrl
+ - allwinner,sun50i-h6-r-pinctrl
+ - allwinner,sun50i-h616-pinctrl
+ - allwinner,sun50i-h616-r-pinctrl
+ - allwinner,suniv-f1c100s-pinctrl
+ - nextthing,gr8-pinctrl
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ minItems: 1
+ maxItems: 8
+ description:
+ One interrupt per external interrupt bank supported on the
+ controller, sorted by bank number ascending order.
+
+ clocks:
+ items:
+ - description: Bus Clock
+ - description: High Frequency Oscillator
+ - description: Low Frequency Oscillator
+
+ clock-names:
+ items:
+ - const: apb
+ - const: hosc
+ - const: losc
+
+ gpio-controller: true
+ interrupt-controller: true
+ gpio-line-names: true
+
+ input-debounce:
+ description:
+ Debouncing periods in microseconds, one period per interrupt
+ bank found in the controller
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ minItems: 1
+ maxItems: 8
+
+patternProperties:
+ # It's pretty scary, but the basic idea is that:
+ # - One node name can start with either s- or r- for PRCM nodes,
+ # - Then, the name itself can be any repetition of <string>- (to
+ # accomodate with nodes like uart4-rts-cts-pins), where each
+ # string can be either starting with 'p' but in a string longer
+ # than 3, or something that doesn't start with 'p',
+ # - Then, the bank name is optional and will be between pa and pg,
+ # pl or pm. Some pins groups that have several options will have
+ # the pin numbers then,
+ # - Finally, the name will end with either -pin or pins.
+
+ "^([rs]-)?(([a-z0-9]{3,}|[a-oq-z][a-z0-9]*?)?-)+?(p[a-ilm][0-9]*?-)??pins?$":
+ type: object
+
+ properties:
+ pins: true
+ function: true
+ bias-disable: true
+ bias-pull-up: true
+ bias-pull-down: true
+
+ drive-strength:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [10, 20, 30, 40]
+
+ required:
+ - pins
+ - function
+
+ additionalProperties: false
+
+ "^vcc-p[a-ilm]-supply$":
+ description:
+ Power supplies for pin banks.
+
+required:
+ - "#gpio-cells"
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+ - gpio-controller
+
+allOf:
+ # FIXME: We should have the pin bank supplies here, but not a lot of
+ # boards are defining it at the moment so it would generate a lot of
+ # warnings.
+
+ - $ref: "pinctrl.yaml#"
+ - if:
+ not:
+ properties:
+ compatible:
+ enum:
+ - allwinner,sun50i-h616-r-pinctrl
+
+ then:
+ required:
+ - "#interrupt-cells"
+ - interrupts
+ - interrupt-controller
+
+ - if:
+ properties:
+ compatible:
+ enum:
+ - allwinner,sun50i-h616-pinctrl
+
+ then:
+ properties:
+ interrupts:
+ minItems: 8
+
+ - if:
+ properties:
+ compatible:
+ enum:
+ - allwinner,sun50i-a100-pinctrl
+
+ then:
+ properties:
+ interrupts:
+ minItems: 7
+ maxItems: 7
+
+ - if:
+ properties:
+ compatible:
+ enum:
+ - allwinner,sun20i-d1-pinctrl
+
+ then:
+ properties:
+ interrupts:
+ minItems: 6
+ maxItems: 6
+
+ - if:
+ properties:
+ compatible:
+ enum:
+ - allwinner,sun9i-a80-pinctrl
+
+ then:
+ properties:
+ interrupts:
+ minItems: 5
+ maxItems: 5
+
+ - if:
+ properties:
+ compatible:
+ enum:
+ - allwinner,sun6i-a31-pinctrl
+ - allwinner,sun6i-a31s-pinctrl
+ - allwinner,sun50i-h6-pinctrl
+
+ then:
+ properties:
+ interrupts:
+ minItems: 4
+ maxItems: 4
+
+ - if:
+ properties:
+ compatible:
+ enum:
+ - allwinner,sun8i-a23-pinctrl
+ - allwinner,sun8i-a83t-pinctrl
+ - allwinner,sun50i-a64-pinctrl
+ - allwinner,sun50i-h5-pinctrl
+ - allwinner,suniv-f1c100s-pinctrl
+
+ then:
+ properties:
+ interrupts:
+ minItems: 3
+ maxItems: 3
+
+ - if:
+ properties:
+ compatible:
+ enum:
+ - allwinner,sun6i-a31-r-pinctrl
+ - allwinner,sun8i-a33-pinctrl
+ - allwinner,sun8i-h3-pinctrl
+ - allwinner,sun8i-v3-pinctrl
+ - allwinner,sun8i-v3s-pinctrl
+ - allwinner,sun9i-a80-r-pinctrl
+ - allwinner,sun50i-h6-r-pinctrl
+
+ then:
+ properties:
+ interrupts:
+ minItems: 2
+ maxItems: 2
+
+ - if:
+ properties:
+ compatible:
+ enum:
+ - allwinner,sun4i-a10-pinctrl
+ - allwinner,sun5i-a10s-pinctrl
+ - allwinner,sun5i-a13-pinctrl
+ - allwinner,sun7i-a20-pinctrl
+ - allwinner,sun8i-a23-r-pinctrl
+ - allwinner,sun8i-a83t-r-pinctrl
+ - allwinner,sun8i-h3-r-pinctrl
+ - allwinner,sun8i-r40-pinctrl
+ - allwinner,sun50i-a64-r-pinctrl
+ - allwinner,sun50i-a100-r-pinctrl
+ - nextthing,gr8-pinctrl
+
+ then:
+ properties:
+ interrupts:
+ minItems: 1
+ maxItems: 1
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/sun5i-ccu.h>
+
+ pio: pinctrl@1c20800 {
+ compatible = "allwinner,sun5i-a13-pinctrl";
+ reg = <0x01c20800 0x400>;
+ interrupts = <28>;
+ clocks = <&ccu CLK_APB0_PIO>, <&osc24M>, <&osc32k>;
+ clock-names = "apb", "hosc", "losc";
+ gpio-controller;
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ #gpio-cells = <3>;
+
+ uart1_pe_pins: uart1-pe-pins {
+ pins = "PE10", "PE11";
+ function = "uart1";
+ };
+
+ uart1_pg_pins: uart1-pg-pins {
+ pins = "PG3", "PG4";
+ function = "uart1";
+ };
+ };