diff options
Diffstat (limited to 'Documentation/devicetree/bindings/pinctrl/bitmain,bm1880-pinctrl.txt')
| -rw-r--r-- | Documentation/devicetree/bindings/pinctrl/bitmain,bm1880-pinctrl.txt | 126 |
1 files changed, 126 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/pinctrl/bitmain,bm1880-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/bitmain,bm1880-pinctrl.txt new file mode 100644 index 000000000..498077612 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/bitmain,bm1880-pinctrl.txt @@ -0,0 +1,126 @@ +Bitmain BM1880 Pin Controller + +This binding describes the pin controller found in the BM1880 SoC. + +Required Properties: + +- compatible: Should be "bitmain,bm1880-pinctrl" +- reg: Offset and length of pinctrl space in SCTRL. + +Please refer to pinctrl-bindings.txt in this directory for details of the +common pinctrl bindings used by client devices, including the meaning of the +phrase "pin configuration node". + +The pin configuration nodes act as a container for an arbitrary number of +subnodes. Each of these subnodes represents some desired configuration for a +pin, a group, or a list of pins or groups. This configuration for BM1880 SoC +includes pinmux and various pin configuration parameters, such as pull-up, +slew rate etc... + +Each configuration node can consist of multiple nodes describing the pinmux +options. The name of each subnode is not important; all subnodes should be +enumerated and processed purely based on their content. + +The following generic properties as defined in pinctrl-bindings.txt are valid +to specify in a pinmux subnode: + +Required Properties: + +- pins: An array of strings, each string containing the name of a pin. + Valid values for pins are: + + MIO0 - MIO111 + +- groups: An array of strings, each string containing the name of a pin + group. Valid values for groups are: + + nand_grp, spi_grp, emmc_grp, sdio_grp, eth0_grp, pwm0_grp, + pwm1_grp, pwm2_grp, pwm3_grp, pwm4_grp, pwm5_grp, pwm6_grp, + pwm7_grp, pwm8_grp, pwm9_grp, pwm10_grp, pwm11_grp, pwm12_grp, + pwm13_grp, pwm14_grp, pwm15_grp, pwm16_grp, pwm17_grp, + pwm18_grp, pwm19_grp, pwm20_grp, pwm21_grp, pwm22_grp, + pwm23_grp, pwm24_grp, pwm25_grp, pwm26_grp, pwm27_grp, + pwm28_grp, pwm29_grp, pwm30_grp, pwm31_grp, pwm32_grp, + pwm33_grp, pwm34_grp, pwm35_grp, pwm36_grp, i2c0_grp, + i2c1_grp, i2c2_grp, i2c3_grp, i2c4_grp, uart0_grp, uart1_grp, + uart2_grp, uart3_grp, uart4_grp, uart5_grp, uart6_grp, + uart7_grp, uart8_grp, uart9_grp, uart10_grp, uart11_grp, + uart12_grp, uart13_grp, uart14_grp, uart15_grp, gpio0_grp, + gpio1_grp, gpio2_grp, gpio3_grp, gpio4_grp, gpio5_grp, + gpio6_grp, gpio7_grp, gpio8_grp, gpio9_grp, gpio10_grp, + gpio11_grp, gpio12_grp, gpio13_grp, gpio14_grp, gpio15_grp, + gpio16_grp, gpio17_grp, gpio18_grp, gpio19_grp, gpio20_grp, + gpio21_grp, gpio22_grp, gpio23_grp, gpio24_grp, gpio25_grp, + gpio26_grp, gpio27_grp, gpio28_grp, gpio29_grp, gpio30_grp, + gpio31_grp, gpio32_grp, gpio33_grp, gpio34_grp, gpio35_grp, + gpio36_grp, gpio37_grp, gpio38_grp, gpio39_grp, gpio40_grp, + gpio41_grp, gpio42_grp, gpio43_grp, gpio44_grp, gpio45_grp, + gpio46_grp, gpio47_grp, gpio48_grp, gpio49_grp, gpio50_grp, + gpio51_grp, gpio52_grp, gpio53_grp, gpio54_grp, gpio55_grp, + gpio56_grp, gpio57_grp, gpio58_grp, gpio59_grp, gpio60_grp, + gpio61_grp, gpio62_grp, gpio63_grp, gpio64_grp, gpio65_grp, + gpio66_grp, gpio67_grp, eth1_grp, i2s0_grp, i2s0_mclkin_grp, + i2s1_grp, i2s1_mclkin_grp, spi0_grp + +- function: An array of strings, each string containing the name of the + pinmux functions. The following are the list of pinmux + functions available: + + nand, spi, emmc, sdio, eth0, pwm0, pwm1, pwm2, pwm3, pwm4, + pwm5, pwm6, pwm7, pwm8, pwm9, pwm10, pwm11, pwm12, pwm13, + pwm14, pwm15, pwm16, pwm17, pwm18, pwm19, pwm20, pwm21, pwm22, + pwm23, pwm24, pwm25, pwm26, pwm27, pwm28, pwm29, pwm30, pwm31, + pwm32, pwm33, pwm34, pwm35, pwm36, i2c0, i2c1, i2c2, i2c3, + i2c4, uart0, uart1, uart2, uart3, uart4, uart5, uart6, uart7, + uart8, uart9, uart10, uart11, uart12, uart13, uart14, uart15, + gpio0, gpio1, gpio2, gpio3, gpio4, gpio5, gpio6, gpio7, gpio8, + gpio9, gpio10, gpio11, gpio12, gpio13, gpio14, gpio15, gpio16, + gpio17, gpio18, gpio19, gpio20, gpio21, gpio22, gpio23, + gpio24, gpio25, gpio26, gpio27, gpio28, gpio29, gpio30, + gpio31, gpio32, gpio33, gpio34, gpio35, gpio36, gpio37, + gpio38, gpio39, gpio40, gpio41, gpio42, gpio43, gpio44, + gpio45, gpio46, gpio47, gpio48, gpio49, gpio50, gpio51, + gpio52, gpio53, gpio54, gpio55, gpio56, gpio57, gpio58, + gpio59, gpio60, gpio61, gpio62, gpio63, gpio64, gpio65, + gpio66, gpio67, eth1, i2s0, i2s0_mclkin, i2s1, i2s1_mclkin, + spi0 + +Optional Properties: + +- bias-disable: No arguments. Disable pin bias. +- bias-pull-down: No arguments. The specified pins should be configured as + pull down. +- bias-pull-up: No arguments. The specified pins should be configured as + pull up. +- input-schmitt-enable: No arguments: Enable schmitt trigger for the specified + pins +- input-schmitt-disable: No arguments: Disable schmitt trigger for the specified + pins +- slew-rate: Integer. Sets slew rate for the specified pins. + Valid values are: + <0> - Slow + <1> - Fast +- drive-strength: Integer. Selects the drive strength for the specified + pins in mA. + Valid values are: + <4> + <8> + <12> + <16> + <20> + <24> + <28> + <32> + +Example: + pinctrl: pinctrl@400 { + compatible = "bitmain,bm1880-pinctrl"; + reg = <0x400 0x120>; + + pinctrl_uart0_default: uart0-default { + pinmux { + groups = "uart0_grp"; + function = "uart0"; + }; + }; + }; |