summaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8186.yaml
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings/pinctrl/pinctrl-mt8186.yaml')
-rw-r--r--Documentation/devicetree/bindings/pinctrl/pinctrl-mt8186.yaml276
1 files changed, 276 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8186.yaml b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8186.yaml
new file mode 100644
index 000000000..26573a793
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8186.yaml
@@ -0,0 +1,276 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/pinctrl-mt8186.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek MT8186 Pin Controller
+
+maintainers:
+ - Sean Wang <sean.wang@mediatek.com>
+
+description: |
+ The Mediatek's Pin controller is used to control SoC pins.
+
+properties:
+ compatible:
+ const: mediatek,mt8186-pinctrl
+
+ gpio-controller: true
+
+ '#gpio-cells':
+ description: |
+ Number of cells in GPIO specifier. Since the generic GPIO binding is used,
+ the amount of cells must be specified as 2. See the below
+ mentioned gpio binding representation for description of particular cells.
+ const: 2
+
+ gpio-ranges:
+ maxItems: 1
+
+ gpio-line-names: true
+
+ reg:
+ description: |
+ Physical address base for gpio base registers. There are 8 different GPIO
+ physical address base in mt8186.
+ maxItems: 8
+
+ reg-names:
+ description: |
+ Gpio base register names.
+ items:
+ - const: iocfg0
+ - const: iocfg_lt
+ - const: iocfg_lm
+ - const: iocfg_lb
+ - const: iocfg_bl
+ - const: iocfg_rb
+ - const: iocfg_rt
+ - const: eint
+
+ interrupt-controller: true
+
+ '#interrupt-cells':
+ const: 2
+
+ interrupts:
+ description: The interrupt outputs to sysirq
+ maxItems: 1
+
+ mediatek,rsel-resistance-in-si-unit:
+ type: boolean
+ description: |
+ Identifying i2c pins pull up/down type which is RSEL. It can support
+ RSEL define or si unit value(ohm) to set different resistance.
+
+# PIN CONFIGURATION NODES
+patternProperties:
+ '-pins$':
+ type: object
+ additionalProperties: false
+ patternProperties:
+ '^pins':
+ type: object
+ additionalProperties: false
+ description: |
+ A pinctrl node should contain at least one subnodes representing the
+ pinctrl groups available on the machine. Each subnode will list the
+ pins it needs, and how they should be configured, with regard to muxer
+ configuration, pullups, drive strength, input enable/disable and
+ input schmitt.
+ An example of using macro:
+ pincontroller {
+ /* GPIO0 set as multifunction GPIO0 */
+ gpio-pins {
+ pins {
+ pinmux = <PINMUX_GPIO0__FUNC_GPIO0>;
+ }
+ };
+ /* GPIO128 set as multifunction SDA0 */
+ i2c0-pins {
+ pins {
+ pinmux = <PINMUX_GPIO128__FUNC_SDA0>;
+ }
+ };
+ };
+ $ref: "pinmux-node.yaml"
+
+ properties:
+ pinmux:
+ description: |
+ Integer array, represents gpio pin number and mux setting.
+ Supported pin number and mux varies for different SoCs, and are
+ defined as macros in dt-bindings/pinctrl/<soc>-pinfunc.h
+ directly.
+
+ drive-strength:
+ enum: [2, 4, 6, 8, 10, 12, 14, 16]
+
+ drive-strength-microamp:
+ enum: [125, 250, 500, 1000]
+
+ bias-pull-down:
+ oneOf:
+ - type: boolean
+ - enum: [100, 101, 102, 103]
+ description: mt8186 pull down PUPD/R0/R1 type define value.
+ - enum: [200, 201, 202, 203]
+ description: mt8186 pull down RSEL type define value.
+ - enum: [75000, 5000]
+ description: mt8186 pull down RSEL type si unit value(ohm).
+ description: |
+ For pull down type is normal, it don't need add RSEL & R1R0 define
+ and resistance value.
+ For pull down type is PUPD/R0/R1 type, it can add R1R0 define to
+ set different resistance. It can support "MTK_PUPD_SET_R1R0_00" &
+ "MTK_PUPD_SET_R1R0_01" & "MTK_PUPD_SET_R1R0_10" &
+ "MTK_PUPD_SET_R1R0_11" define in mt8186.
+ For pull down type is RSEL, it can add RSEL define & resistance
+ value(ohm) to set different resistance by identifying property
+ "mediatek,rsel-resistance-in-si-unit".
+ It can support "MTK_PULL_SET_RSEL_000" & "MTK_PULL_SET_RSEL_001"
+ & "MTK_PULL_SET_RSEL_010" & "MTK_PULL_SET_RSEL_011"
+ define in mt8186. It can also support resistance value(ohm)
+ "75000" & "5000" in mt8186.
+ An example of using RSEL define:
+ pincontroller {
+ i2c0_pin {
+ pins {
+ pinmux = <PINMUX_GPIO128__FUNC_SDA0>;
+ bias-pull-down = <MTK_PULL_SET_RSEL_001>;
+ }
+ };
+ };
+ An example of using si unit resistance value(ohm):
+ &pio {
+ mediatek,rsel-resistance-in-si-unit;
+ }
+ pincontroller {
+ i2c0_pin {
+ pins {
+ pinmux = <PINMUX_GPIO128__FUNC_SDA0>;
+ bias-pull-down = <75000>;
+ }
+ };
+ };
+
+ bias-pull-up:
+ oneOf:
+ - type: boolean
+ - enum: [100, 101, 102, 103]
+ description: mt8186 pull up PUPD/R0/R1 type define value.
+ - enum: [200, 201, 202, 203]
+ description: mt8186 pull up RSEL type define value.
+ - enum: [1000, 5000, 10000, 75000]
+ description: mt8186 pull up RSEL type si unit value(ohm).
+ description: |
+ For pull up type is normal, it don't need add RSEL & R1R0 define
+ and resistance value.
+ For pull up type is PUPD/R0/R1 type, it can add R1R0 define to
+ set different resistance. It can support "MTK_PUPD_SET_R1R0_00" &
+ "MTK_PUPD_SET_R1R0_01" & "MTK_PUPD_SET_R1R0_10" &
+ "MTK_PUPD_SET_R1R0_11" define in mt8186.
+ For pull up type is RSEL, it can add RSEL define & resistance
+ value(ohm) to set different resistance by identifying property
+ "mediatek,rsel-resistance-in-si-unit".
+ It can support "MTK_PULL_SET_RSEL_000" & "MTK_PULL_SET_RSEL_001"
+ & "MTK_PULL_SET_RSEL_010" & "MTK_PULL_SET_RSEL_011"
+ define in mt8186. It can also support resistance value(ohm)
+ "1000" & "5000" & "10000" & "75000" in mt8186.
+ An example of using si unit resistance value(ohm):
+ &pio {
+ mediatek,rsel-resistance-in-si-unit;
+ }
+ pincontroller {
+ i2c0-pins {
+ pins {
+ pinmux = <PINMUX_GPIO128__FUNC_SDA0>;
+ bias-pull-up = <1000>;
+ }
+ };
+ };
+
+ bias-disable: true
+
+ output-high: true
+
+ output-low: true
+
+ input-enable: true
+
+ input-disable: true
+
+ input-schmitt-enable: true
+
+ input-schmitt-disable: true
+
+ required:
+ - pinmux
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - interrupt-controller
+ - '#interrupt-cells'
+ - gpio-controller
+ - '#gpio-cells'
+ - gpio-ranges
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/pinctrl/mt8186-pinfunc.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ pio: pinctrl@10005000 {
+ compatible = "mediatek,mt8186-pinctrl";
+ reg = <0x10005000 0x1000>,
+ <0x10002000 0x0200>,
+ <0x10002200 0x0200>,
+ <0x10002400 0x0200>,
+ <0x10002600 0x0200>,
+ <0x10002A00 0x0200>,
+ <0x10002c00 0x0200>,
+ <0x1000b000 0x1000>;
+ reg-names = "iocfg0", "iocfg_lt", "iocfg_lm",
+ "iocfg_lb", "iocfg_bl", "iocfg_rb",
+ "iocfg_rt", "eint";
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pio 0 0 185>;
+ interrupt-controller;
+ interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH 0>;
+ #interrupt-cells = <2>;
+
+ pio-pins {
+ pins {
+ pinmux = <PINMUX_GPIO0__FUNC_GPIO0>;
+ output-low;
+ };
+ };
+
+ spi0-pins {
+ pins-spi {
+ pinmux = <PINMUX_GPIO0__FUNC_SPI0_CLK_B>,
+ <PINMUX_GPIO1__FUNC_SPI0_CSB_B>,
+ <PINMUX_GPIO2__FUNC_SPI0_MO_B>;
+ bias-disable;
+ };
+ pins-spi-mi {
+ pinmux = <PINMUX_GPIO3__FUNC_SPI0_MI_B>;
+ bias-pull-down;
+ };
+ };
+
+ i2c0-pins {
+ pins {
+ pinmux = <PINMUX_GPIO127__FUNC_SCL0>,
+ <PINMUX_GPIO128__FUNC_SDA0>;
+ bias-pull-up = <MTK_PULL_SET_RSEL_001>;
+ drive-strength-microamp = <1000>;
+ };
+ };
+ };