diff options
Diffstat (limited to 'Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml')
| -rw-r--r-- | Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml | 538 |
1 files changed, 538 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml new file mode 100644 index 000000000..29dd503f9 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml @@ -0,0 +1,538 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/qcom,pmic-gpio.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm PMIC GPIO block + +maintainers: + - Bjorn Andersson <bjorn.andersson@linaro.org> + +description: + This binding describes the GPIO block(s) found in the 8xxx series of + PMIC's from Qualcomm. + +properties: + compatible: + items: + - enum: + - qcom,pm2250-gpio + - qcom,pm660-gpio + - qcom,pm660l-gpio + - qcom,pm6125-gpio + - qcom,pm6150-gpio + - qcom,pm6150l-gpio + - qcom,pm6350-gpio + - qcom,pm7250b-gpio + - qcom,pm7325-gpio + - qcom,pm8005-gpio + - qcom,pm8008-gpio + - qcom,pm8018-gpio + - qcom,pm8019-gpio + - qcom,pm8038-gpio + - qcom,pm8058-gpio + - qcom,pm8150-gpio + - qcom,pm8150b-gpio + - qcom,pm8150l-gpio + - qcom,pm8226-gpio + - qcom,pm8350-gpio + - qcom,pm8350b-gpio + - qcom,pm8350c-gpio + - qcom,pm8450-gpio + - qcom,pm8916-gpio + - qcom,pm8917-gpio + - qcom,pm8921-gpio + - qcom,pm8941-gpio + - qcom,pm8950-gpio + - qcom,pm8994-gpio + - qcom,pm8998-gpio + - qcom,pma8084-gpio + - qcom,pmi8950-gpio + - qcom,pmi8994-gpio + - qcom,pmi8998-gpio + - qcom,pmk8350-gpio + - qcom,pmm8155au-gpio + - qcom,pmp8074-gpio + - qcom,pmr735a-gpio + - qcom,pmr735b-gpio + - qcom,pms405-gpio + - qcom,pmx55-gpio + - qcom,pmx65-gpio + + - enum: + - qcom,spmi-gpio + - qcom,ssbi-gpio + + reg: + maxItems: 1 + + interrupt-controller: true + + '#interrupt-cells': + const: 2 + + gpio-controller: true + + gpio-ranges: + maxItems: 1 + + gpio-line-names: + minItems: 2 + maxItems: 44 + + gpio-reserved-ranges: + minItems: 1 + # maxItems as half of total number of GPIOs, as there has to be at + # least one usable GPIO between each reserved range. + maxItems: 22 + + '#gpio-cells': + const: 2 + description: + The first cell will be used to define gpio number and the + second denotes the flags for this gpio + +additionalProperties: false + +required: + - compatible + - reg + - gpio-controller + - '#gpio-cells' + - gpio-ranges + - interrupt-controller + +allOf: + - if: + properties: + compatible: + contains: + enum: + - qcom,pm8008-gpio + - qcom,pmi8950-gpio + then: + properties: + gpio-line-names: + minItems: 2 + maxItems: 2 + gpio-reserved-ranges: + maxItems: 1 + + - if: + properties: + compatible: + contains: + enum: + - qcom,pm8005-gpio + - qcom,pm8450-gpio + - qcom,pm8916-gpio + - qcom,pmk8350-gpio + - qcom,pmr735a-gpio + - qcom,pmr735b-gpio + then: + properties: + gpio-line-names: + minItems: 4 + maxItems: 4 + gpio-reserved-ranges: + minItems: 1 + maxItems: 2 + + - if: + properties: + compatible: + contains: + enum: + - qcom,pm8018-gpio + - qcom,pm8019-gpio + then: + properties: + gpio-line-names: + minItems: 6 + maxItems: 6 + gpio-reserved-ranges: + minItems: 1 + maxItems: 3 + + - if: + properties: + compatible: + contains: + enum: + - qcom,pm8226-gpio + - qcom,pm8350b-gpio + - qcom,pm8950-gpio + then: + properties: + gpio-line-names: + minItems: 8 + maxItems: 8 + gpio-reserved-ranges: + minItems: 1 + maxItems: 4 + + - if: + properties: + compatible: + contains: + enum: + - qcom,pm6350-gpio + - qcom,pm8350c-gpio + then: + properties: + gpio-line-names: + minItems: 9 + maxItems: 9 + gpio-reserved-ranges: + minItems: 1 + maxItems: 5 + + - if: + properties: + compatible: + contains: + enum: + - qcom,pm2250-gpio + - qcom,pm6150-gpio + - qcom,pm7325-gpio + - qcom,pm8150-gpio + - qcom,pm8350-gpio + - qcom,pmc8180-gpio + - qcom,pmi8994-gpio + - qcom,pmm8155au-gpio + then: + properties: + gpio-line-names: + minItems: 10 + maxItems: 10 + gpio-reserved-ranges: + minItems: 1 + maxItems: 5 + + - if: + properties: + compatible: + contains: + enum: + - qcom,pmx55-gpio + then: + properties: + gpio-line-names: + minItems: 11 + maxItems: 11 + gpio-reserved-ranges: + minItems: 1 + maxItems: 6 + + - if: + properties: + compatible: + contains: + enum: + - qcom,pm660l-gpio + - qcom,pm6150l-gpio + - qcom,pm7250b-gpio + - qcom,pm8038-gpio + - qcom,pm8150b-gpio + - qcom,pm8150l-gpio + - qcom,pmc8180c-gpio + - qcom,pmp8074-gpio + - qcom,pms405-gpio + then: + properties: + gpio-line-names: + minItems: 12 + maxItems: 12 + gpio-reserved-ranges: + minItems: 1 + maxItems: 6 + + - if: + properties: + compatible: + contains: + enum: + - qcom,pm660-gpio + then: + properties: + gpio-line-names: + minItems: 13 + maxItems: 13 + gpio-reserved-ranges: + minItems: 1 + maxItems: 7 + + - if: + properties: + compatible: + contains: + enum: + - qcom,pmi8998-gpio + then: + properties: + gpio-line-names: + minItems: 14 + maxItems: 14 + gpio-reserved-ranges: + minItems: 1 + maxItems: 7 + + - if: + properties: + compatible: + contains: + enum: + - qcom,pmx65-gpio + then: + properties: + gpio-line-names: + minItems: 16 + maxItems: 16 + gpio-reserved-ranges: + minItems: 1 + maxItems: 8 + + - if: + properties: + compatible: + contains: + enum: + - qcom,pm8994-gpio + - qcom,pma8084-gpio + then: + properties: + gpio-line-names: + minItems: 22 + maxItems: 22 + gpio-reserved-ranges: + minItems: 1 + maxItems: 11 + + - if: + properties: + compatible: + contains: + enum: + - qcom,pm8998-gpio + then: + properties: + gpio-line-names: + minItems: 26 + maxItems: 26 + gpio-reserved-ranges: + minItems: 1 + maxItems: 13 + + - if: + properties: + compatible: + contains: + enum: + - qcom,pm8941-gpio + then: + properties: + gpio-line-names: + minItems: 36 + maxItems: 36 + gpio-reserved-ranges: + minItems: 1 + maxItems: 18 + + - if: + properties: + compatible: + contains: + enum: + - qcom,pm8917-gpio + then: + properties: + gpio-line-names: + minItems: 38 + maxItems: 38 + gpio-reserved-ranges: + minItems: 1 + maxItems: 19 + + - if: + properties: + compatible: + contains: + enum: + - qcom,pm8058-gpio + - qcom,pm8921-gpio + then: + properties: + gpio-line-names: + minItems: 44 + maxItems: 44 + gpio-reserved-ranges: + minItems: 1 + maxItems: 22 + +patternProperties: + '-state$': + oneOf: + - $ref: "#/$defs/qcom-pmic-gpio-state" + - patternProperties: + "(pinconf|-pins)$": + $ref: "#/$defs/qcom-pmic-gpio-state" + additionalProperties: false + +$defs: + qcom-pmic-gpio-state: + type: object + allOf: + - $ref: "pinmux-node.yaml" + - $ref: "pincfg-node.yaml" + properties: + pins: + description: + List of gpio pins affected by the properties specified in + this subnode. Valid pins are + - gpio1-gpio9 for pm6125 + - gpio1-gpio10 for pm6150 + - gpio1-gpio12 for pm6150l + - gpio1-gpio9 for pm6350 + - gpio1-gpio12 for pm7250b + - gpio1-gpio10 for pm7325 + - gpio1-gpio4 for pm8005 + - gpio1-gpio2 for pm8008 + - gpio1-gpio6 for pm8018 + - gpio1-gpio12 for pm8038 + - gpio1-gpio40 for pm8058 + - gpio1-gpio10 for pm8150 (holes on gpio2, gpio5, + gpio7 and gpio8) + - gpio1-gpio12 for pm8150b (holes on gpio3, gpio4 + and gpio7) + - gpio1-gpio12 for pm8150l (hole on gpio7) + - gpio1-gpio4 for pm8916 + - gpio1-gpio10 for pm8350 + - gpio1-gpio8 for pm8350b + - gpio1-gpio9 for pm8350c + - gpio1-gpio4 for pm8450 + - gpio1-gpio38 for pm8917 + - gpio1-gpio44 for pm8921 + - gpio1-gpio36 for pm8941 + - gpio1-gpio8 for pm8950 (hole on gpio3) + - gpio1-gpio22 for pm8994 + - gpio1-gpio26 for pm8998 + - gpio1-gpio22 for pma8084 + - gpio1-gpio2 for pmi8950 + - gpio1-gpio10 for pmi8994 + - gpio1-gpio4 for pmk8350 + - gpio1-gpio10 for pmm8155au + - gpio1-gpio12 for pmp8074 (holes on gpio1 and gpio12) + - gpio1-gpio4 for pmr735a + - gpio1-gpio4 for pmr735b + - gpio1-gpio12 for pms405 (holes on gpio1, gpio9 + and gpio10) + - gpio1-gpio11 for pmx55 (holes on gpio3, gpio7, gpio10 + and gpio11) + - gpio1-gpio16 for pmx65 + + items: + pattern: "^gpio([0-9]+)$" + + function: + items: + - enum: + - normal + - paired + - func1 + - func2 + - dtest1 + - dtest2 + - dtest3 + - dtest4 + - func3 # supported by LV/MV GPIO subtypes + - func4 # supported by LV/MV GPIO subtypes + + bias-disable: true + bias-pull-down: true + bias-pull-up: true + + qcom,pull-up-strength: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Specifies the strength to use for pull up, if selected. + Valid values are defined in + <dt-bindings/pinctrl/qcom,pmic-gpio.h> + If this property is omitted 30uA strength will be used + if pull up is selected + enum: [0, 1, 2, 3] + + bias-high-impedance: true + input-enable: true + input-disable: true + output-high: true + output-low: true + output-enable: true + output-disable: true + power-source: true + + qcom,drive-strength: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Selects the drive strength for the specified pins + Valid drive strength values are defined in + <dt-bindings/pinctrl/qcom,pmic-gpio.h> + enum: [0, 1, 2, 3] + + drive-push-pull: true + drive-open-drain: true + drive-open-source: true + + qcom,analog-pass: + $ref: /schemas/types.yaml#/definitions/flag + description: + The specified pins are configured in + analog-pass-through mode. + + qcom,atest: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Selects ATEST rail to route to GPIO when it's + configured in analog-pass-through mode. + enum: [1, 2, 3, 4] + + qcom,dtest-buffer: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Selects DTEST rail to route to GPIO when it's + configured as digital input. + enum: [1, 2, 3, 4] + + required: + - pins + - function + + additionalProperties: false + +examples: + - | + #include <dt-bindings/pinctrl/qcom,pmic-gpio.h> + + pm8921_gpio: gpio@150 { + compatible = "qcom,pm8921-gpio", "qcom,ssbi-gpio"; + reg = <0x150 0x160>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-controller; + gpio-ranges = <&pm8921_gpio 0 0 44>; + #gpio-cells = <2>; + + pm8921_gpio_keys: gpio-keys-state { + volume-keys-pins { + pins = "gpio20", "gpio21"; + function = "normal"; + + input-enable; + bias-pull-up; + drive-push-pull; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; + power-source = <PM8921_GPIO_S4>; + }; + }; + }; +... |