diff options
Diffstat (limited to 'Documentation/devicetree/bindings/pwm')
51 files changed, 2435 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/pwm/allwinner,sun4i-a10-pwm.yaml b/Documentation/devicetree/bindings/pwm/allwinner,sun4i-a10-pwm.yaml new file mode 100644 index 000000000..4cc3cc7c5 --- /dev/null +++ b/Documentation/devicetree/bindings/pwm/allwinner,sun4i-a10-pwm.yaml @@ -0,0 +1,113 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pwm/allwinner,sun4i-a10-pwm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A10 PWM + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + - Maxime Ripard <mripard@kernel.org> + +properties: + "#pwm-cells": + const: 3 + + compatible: + oneOf: + - const: allwinner,sun4i-a10-pwm + - const: allwinner,sun5i-a10s-pwm + - const: allwinner,sun5i-a13-pwm + - const: allwinner,sun7i-a20-pwm + - const: allwinner,sun8i-h3-pwm + - items: + - const: allwinner,sun8i-a83t-pwm + - const: allwinner,sun8i-h3-pwm + - items: + - const: allwinner,sun8i-v3s-pwm + - const: allwinner,sun7i-a20-pwm + - items: + - const: allwinner,sun50i-a64-pwm + - const: allwinner,sun5i-a13-pwm + - items: + - const: allwinner,sun50i-h5-pwm + - const: allwinner,sun5i-a13-pwm + - const: allwinner,sun50i-h6-pwm + + reg: + maxItems: 1 + + clocks: + minItems: 1 + items: + - description: Module Clock + - description: Bus Clock + + # Even though it only applies to subschemas under the conditionals, + # not listing them here will trigger a warning because of the + # additionalsProperties set to false. + clock-names: true + + resets: + maxItems: 1 + + +allOf: + - $ref: pwm.yaml# + + - if: + properties: + compatible: + contains: + const: allwinner,sun50i-h6-pwm + + then: + properties: + clocks: + maxItems: 2 + + clock-names: + items: + - const: mod + - const: bus + + required: + - clock-names + - resets + + else: + properties: + clocks: + maxItems: 1 + +required: + - compatible + - reg + - clocks + +additionalProperties: false + +examples: + - | + pwm: pwm@1c20e00 { + compatible = "allwinner,sun7i-a20-pwm"; + reg = <0x01c20e00 0xc>; + clocks = <&osc24M>; + #pwm-cells = <3>; + }; + + - | + #include <dt-bindings/clock/sun50i-h6-ccu.h> + #include <dt-bindings/reset/sun50i-h6-ccu.h> + + pwm@300a000 { + compatible = "allwinner,sun50i-h6-pwm"; + reg = <0x0300a000 0x400>; + clocks = <&osc24M>, <&ccu CLK_BUS_PWM>; + clock-names = "mod", "bus"; + resets = <&ccu RST_BUS_PWM>; + #pwm-cells = <3>; + }; + +... diff --git a/Documentation/devicetree/bindings/pwm/atmel,at91sam-pwm.yaml b/Documentation/devicetree/bindings/pwm/atmel,at91sam-pwm.yaml new file mode 100644 index 000000000..ab45df803 --- /dev/null +++ b/Documentation/devicetree/bindings/pwm/atmel,at91sam-pwm.yaml @@ -0,0 +1,47 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (C) 2022 Microchip Technology, Inc. and its subsidiaries +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pwm/atmel,at91sam-pwm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Atmel/Microchip PWM controller + +maintainers: + - Claudiu Beznea <claudiu.beznea@microchip.com> + +allOf: + - $ref: "pwm.yaml#" + +properties: + compatible: + oneOf: + - items: + - enum: + - atmel,at91sam9rl-pwm + - atmel,sama5d3-pwm + - atmel,sama5d2-pwm + - microchip,sam9x60-pwm + - items: + - const: microchip,sama7g5-pwm + - const: atmel,sama5d2-pwm + + reg: + maxItems: 1 + + "#pwm-cells": + const: 3 + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + pwm0: pwm@f8034000 { + compatible = "atmel,at91sam9rl-pwm"; + reg = <0xf8034000 0x400>; + #pwm-cells = <3>; + }; diff --git a/Documentation/devicetree/bindings/pwm/atmel-hlcdc-pwm.txt b/Documentation/devicetree/bindings/pwm/atmel-hlcdc-pwm.txt new file mode 100644 index 000000000..afa501bf7 --- /dev/null +++ b/Documentation/devicetree/bindings/pwm/atmel-hlcdc-pwm.txt @@ -0,0 +1,29 @@ +Device-Tree bindings for Atmel's HLCDC (High-end LCD Controller) PWM driver + +The Atmel HLCDC PWM is subdevice of the HLCDC MFD device. +See ../mfd/atmel-hlcdc.txt for more details. + +Required properties: + - compatible: value should be one of the following: + "atmel,hlcdc-pwm" + - pinctr-names: the pin control state names. Should contain "default". + - pinctrl-0: should contain the pinctrl states described by pinctrl + default. + - #pwm-cells: should be set to 3. This PWM chip use the default 3 cells + bindings defined in pwm.yaml in this directory. + +Example: + + hlcdc: hlcdc@f0030000 { + compatible = "atmel,sama5d3-hlcdc"; + reg = <0xf0030000 0x2000>; + clocks = <&lcdc_clk>, <&lcdck>, <&clk32k>; + clock-names = "periph_clk","sys_clk", "slow_clk"; + + hlcdc_pwm: hlcdc-pwm { + compatible = "atmel,hlcdc-pwm"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcd_pwm>; + #pwm-cells = <3>; + }; + }; diff --git a/Documentation/devicetree/bindings/pwm/brcm,bcm7038-pwm.yaml b/Documentation/devicetree/bindings/pwm/brcm,bcm7038-pwm.yaml new file mode 100644 index 000000000..119de3d7f --- /dev/null +++ b/Documentation/devicetree/bindings/pwm/brcm,bcm7038-pwm.yaml @@ -0,0 +1,42 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pwm/brcm,bcm7038-pwm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom BCM7038 PWM controller (BCM7xxx Set Top Box PWM controller) + +maintainers: + - Florian Fainelli <f.fainelli@gmail.com> + +allOf: + - $ref: pwm.yaml# + +properties: + compatible: + const: brcm,bcm7038-pwm + + reg: + maxItems: 1 + + "#pwm-cells": + const: 2 + + clocks: + maxItems: 1 + +required: + - compatible + - reg + - clocks + +additionalProperties: false + +examples: + - | + pwm: pwm@f0408000 { + compatible = "brcm,bcm7038-pwm"; + reg = <0xf0408000 0x28>; + #pwm-cells = <2>; + clocks = <&upg_fixed>; + }; diff --git a/Documentation/devicetree/bindings/pwm/brcm,iproc-pwm.yaml b/Documentation/devicetree/bindings/pwm/brcm,iproc-pwm.yaml new file mode 100644 index 000000000..218ab06c3 --- /dev/null +++ b/Documentation/devicetree/bindings/pwm/brcm,iproc-pwm.yaml @@ -0,0 +1,45 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pwm/brcm,iproc-pwm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom iProc PWM controller + +maintainers: + - Rafał Miłecki <rafal@milecki.pl> + +description: + This controller has 4 channels. + +allOf: + - $ref: pwm.yaml# + +properties: + compatible: + const: brcm,iproc-pwm + + reg: + maxItems: 1 + + clocks: + description: external clock + maxItems: 1 + + "#pwm-cells": + const: 3 + +unevaluatedProperties: false + +required: + - reg + - clocks + +examples: + - | + pwm@18031000 { + compatible = "brcm,iproc-pwm"; + reg = <0x18031000 0x28>; + clocks = <&osc>; + #pwm-cells = <3>; + }; diff --git a/Documentation/devicetree/bindings/pwm/brcm,kona-pwm.txt b/Documentation/devicetree/bindings/pwm/brcm,kona-pwm.txt new file mode 100644 index 000000000..c42eecfc8 --- /dev/null +++ b/Documentation/devicetree/bindings/pwm/brcm,kona-pwm.txt @@ -0,0 +1,21 @@ +Broadcom Kona PWM controller device tree bindings + +This controller has 6 channels. + +Required Properties : +- compatible: should contain "brcm,kona-pwm" +- reg: physical base address and length of the controller's registers +- clocks: phandle + clock specifier pair for the external clock +- #pwm-cells: Should be 3. See pwm.yaml in this directory for a + description of the cells format. + +Refer to clocks/clock-bindings.txt for generic clock consumer properties. + +Example: + +pwm: pwm@3e01a000 { + compatible = "brcm,bcm11351-pwm", "brcm,kona-pwm"; + reg = <0x3e01a000 0xc4>; + clocks = <&pwm_clk>; + #pwm-cells = <3>; +}; diff --git a/Documentation/devicetree/bindings/pwm/cirrus,clps711x-pwm.txt b/Documentation/devicetree/bindings/pwm/cirrus,clps711x-pwm.txt new file mode 100644 index 000000000..c0b202823 --- /dev/null +++ b/Documentation/devicetree/bindings/pwm/cirrus,clps711x-pwm.txt @@ -0,0 +1,15 @@ +* Cirris Logic CLPS711X PWM controller + +Required properties: +- compatible: Shall contain "cirrus,ep7209-pwm". +- reg: Physical base address and length of the controller's registers. +- clocks: phandle + clock specifier pair of the PWM reference clock. +- #pwm-cells: Should be 1. The cell specifies the index of the channel. + +Example: + pwm: pwm@80000400 { + compatible = "cirrus,ep7312-pwm", "cirrus,ep7209-pwm"; + reg = <0x80000400 0x4>; + clocks = <&clks 8>; + #pwm-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/pwm/clk-pwm.yaml b/Documentation/devicetree/bindings/pwm/clk-pwm.yaml new file mode 100644 index 000000000..ec1768291 --- /dev/null +++ b/Documentation/devicetree/bindings/pwm/clk-pwm.yaml @@ -0,0 +1,46 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pwm/clk-pwm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Clock based PWM controller + +maintainers: + - Nikita Travkin <nikita@trvn.ru> + +description: | + Some systems have clocks that can be exposed to external devices. + (e.g. by muxing them to GPIO pins) + It's often possible to control duty-cycle of such clocks which makes them + suitable for generating PWM signal. + +allOf: + - $ref: pwm.yaml# + +properties: + compatible: + const: clk-pwm + + clocks: + description: Clock used to generate the signal. + maxItems: 1 + + "#pwm-cells": + const: 2 + +unevaluatedProperties: false + +required: + - compatible + - clocks + +examples: + - | + pwm { + compatible = "clk-pwm"; + #pwm-cells = <2>; + clocks = <&gcc 0>; + pinctrl-names = "default"; + pinctrl-0 = <&pwm_clk_flash_default>; + }; diff --git a/Documentation/devicetree/bindings/pwm/google,cros-ec-pwm.yaml b/Documentation/devicetree/bindings/pwm/google,cros-ec-pwm.yaml new file mode 100644 index 000000000..c8577bdf6 --- /dev/null +++ b/Documentation/devicetree/bindings/pwm/google,cros-ec-pwm.yaml @@ -0,0 +1,57 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pwm/google,cros-ec-pwm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: PWM controlled by ChromeOS EC + +maintainers: + - Thierry Reding <thierry.reding@gmail.com> + - '"Uwe Kleine-König" <u.kleine-koenig@pengutronix.de>' + +description: | + Google's ChromeOS EC PWM is a simple PWM attached to the Embedded Controller + (EC) and controlled via a host-command interface. + An EC PWM node should be only found as a sub-node of the EC node (see + Documentation/devicetree/bindings/mfd/google,cros-ec.yaml). + +allOf: + - $ref: pwm.yaml# + +properties: + compatible: + oneOf: + - description: PWM controlled using EC_PWM_TYPE_GENERIC channels. + items: + - const: google,cros-ec-pwm + - description: PWM controlled using CROS_EC_PWM_DT_<...> types. + items: + - const: google,cros-ec-pwm-type + + "#pwm-cells": + description: The cell specifies the PWM index. + const: 1 + +required: + - compatible + - '#pwm-cells' + +additionalProperties: false + +examples: + - | + spi { + #address-cells = <1>; + #size-cells = <0>; + + cros-ec@0 { + compatible = "google,cros-ec-spi"; + reg = <0>; + + cros_ec_pwm: pwm { + compatible = "google,cros-ec-pwm"; + #pwm-cells = <1>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/pwm/img-pwm.txt b/Documentation/devicetree/bindings/pwm/img-pwm.txt new file mode 100644 index 000000000..9db6de973 --- /dev/null +++ b/Documentation/devicetree/bindings/pwm/img-pwm.txt @@ -0,0 +1,24 @@ +*Imagination Technologies PWM DAC driver + +Required properties: + - compatible: Should be "img,pistachio-pwm" + - reg: Should contain physical base address and length of pwm registers. + - clocks: Must contain an entry for each entry in clock-names. + See ../clock/clock-bindings.txt for details. + - clock-names: Must include the following entries. + - pwm: PWM operating clock. + - sys: PWM system interface clock. + - #pwm-cells: Should be 2. See pwm.yaml in this directory for the + description of the cells format. + - img,cr-periph: Must contain a phandle to the peripheral control + syscon node which contains PWM control registers. + +Example: + pwm: pwm@18101300 { + compatible = "img,pistachio-pwm"; + reg = <0x18101300 0x100>; + clocks = <&pwm_clk>, <&system_clk>; + clock-names = "pwm", "sys"; + #pwm-cells = <2>; + img,cr-periph = <&cr_periph>; + }; diff --git a/Documentation/devicetree/bindings/pwm/imx-pwm.yaml b/Documentation/devicetree/bindings/pwm/imx-pwm.yaml new file mode 100644 index 000000000..b3da4e629 --- /dev/null +++ b/Documentation/devicetree/bindings/pwm/imx-pwm.yaml @@ -0,0 +1,85 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pwm/imx-pwm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale i.MX PWM controller + +maintainers: + - Philipp Zabel <p.zabel@pengutronix.de> + +allOf: + - $ref: pwm.yaml# + +properties: + "#pwm-cells": + description: | + Should be 2 for i.MX1 and 3 for i.MX27 and newer SoCs. See pwm.yaml + in this directory for a description of the cells format. + enum: + - 2 + - 3 + + compatible: + oneOf: + - enum: + - fsl,imx1-pwm + - fsl,imx27-pwm + - items: + - enum: + - fsl,imx25-pwm + - fsl,imx31-pwm + - fsl,imx50-pwm + - fsl,imx51-pwm + - fsl,imx53-pwm + - fsl,imx6q-pwm + - fsl,imx6sl-pwm + - fsl,imx6sll-pwm + - fsl,imx6sx-pwm + - fsl,imx6ul-pwm + - fsl,imx7d-pwm + - fsl,imx8mm-pwm + - fsl,imx8mn-pwm + - fsl,imx8mp-pwm + - fsl,imx8mq-pwm + - const: fsl,imx27-pwm + + reg: + maxItems: 1 + + clocks: + items: + - description: SoC PWM ipg clock + - description: SoC PWM per clock + + clock-names: + items: + - const: ipg + - const: per + + interrupts: + maxItems: 1 + +required: + - compatible + - reg + - clocks + - clock-names + - interrupts + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/imx5-clock.h> + + pwm@53fb4000 { + #pwm-cells = <3>; + compatible = "fsl,imx27-pwm"; + reg = <0x53fb4000 0x4000>; + clocks = <&clks IMX5_CLK_PWM1_IPG_GATE>, + <&clks IMX5_CLK_PWM1_HF_GATE>; + clock-names = "ipg", "per"; + interrupts = <61>; + }; diff --git a/Documentation/devicetree/bindings/pwm/imx-tpm-pwm.yaml b/Documentation/devicetree/bindings/pwm/imx-tpm-pwm.yaml new file mode 100644 index 000000000..8bef9dfeb --- /dev/null +++ b/Documentation/devicetree/bindings/pwm/imx-tpm-pwm.yaml @@ -0,0 +1,57 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pwm/imx-tpm-pwm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale i.MX TPM PWM controller + +maintainers: + - Anson Huang <anson.huang@nxp.com> + +description: | + The TPM counter and period counter are shared between multiple + channels, so all channels should use same period setting. + +allOf: + - $ref: pwm.yaml# + +properties: + "#pwm-cells": + const: 3 + + compatible: + enum: + - fsl,imx7ulp-pwm + + reg: + maxItems: 1 + + assigned-clocks: + maxItems: 1 + + assigned-clock-parents: + maxItems: 1 + + clocks: + maxItems: 1 + +required: + - compatible + - reg + - clocks + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/imx7ulp-clock.h> + + pwm@40250000 { + compatible = "fsl,imx7ulp-pwm"; + reg = <0x40250000 0x1000>; + assigned-clocks = <&pcc2 IMX7ULP_CLK_LPTPM4>; + assigned-clock-parents = <&scg1 IMX7ULP_CLK_SOSC_BUS_CLK>; + clocks = <&pcc2 IMX7ULP_CLK_LPTPM4>; + #pwm-cells = <3>; + }; diff --git a/Documentation/devicetree/bindings/pwm/intel,keembay-pwm.yaml b/Documentation/devicetree/bindings/pwm/intel,keembay-pwm.yaml new file mode 100644 index 000000000..5b18a5913 --- /dev/null +++ b/Documentation/devicetree/bindings/pwm/intel,keembay-pwm.yaml @@ -0,0 +1,46 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (C) 2020 Intel Corporation +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pwm/intel,keembay-pwm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Intel Keem Bay PWM + +maintainers: + - Vijayakannan Ayyathurai <vijayakannan.ayyathurai@intel.com> + +allOf: + - $ref: pwm.yaml# + +properties: + compatible: + enum: + - intel,keembay-pwm + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + "#pwm-cells": + const: 2 + +required: + - compatible + - reg + - clocks + +additionalProperties: false + +examples: + - | + #define KEEM_BAY_A53_GPIO + + pwm@203200a0 { + compatible = "intel,keembay-pwm"; + reg = <0x203200a0 0xe8>; + clocks = <&scmi_clk KEEM_BAY_A53_GPIO>; + #pwm-cells = <2>; + }; diff --git a/Documentation/devicetree/bindings/pwm/intel,lgm-pwm.yaml b/Documentation/devicetree/bindings/pwm/intel,lgm-pwm.yaml new file mode 100644 index 000000000..59d7c4d86 --- /dev/null +++ b/Documentation/devicetree/bindings/pwm/intel,lgm-pwm.yaml @@ -0,0 +1,47 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pwm/intel,lgm-pwm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: LGM SoC PWM fan controller + +maintainers: + - Rahul Tanwar <rtanwar@maxlinear.com> + +allOf: + - $ref: pwm.yaml# + +properties: + compatible: + const: intel,lgm-pwm + + reg: + maxItems: 1 + + "#pwm-cells": + const: 2 + + clocks: + maxItems: 1 + + resets: + maxItems: 1 + +required: + - compatible + - reg + - clocks + - resets + +additionalProperties: false + +examples: + - | + pwm: pwm@e0d00000 { + compatible = "intel,lgm-pwm"; + reg = <0xe0d00000 0x30>; + #pwm-cells = <2>; + clocks = <&cgu0 126>; + resets = <&rcu0 0x30 21>; + }; diff --git a/Documentation/devicetree/bindings/pwm/iqs620a-pwm.yaml b/Documentation/devicetree/bindings/pwm/iqs620a-pwm.yaml new file mode 100644 index 000000000..0a46af240 --- /dev/null +++ b/Documentation/devicetree/bindings/pwm/iqs620a-pwm.yaml @@ -0,0 +1,34 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pwm/iqs620a-pwm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Azoteq IQS620A PWM Generator + +maintainers: + - Jeff LaBundy <jeff@labundy.com> + +description: | + The Azoteq IQS620A multi-function sensor generates a fixed-frequency PWM + output represented by a "pwm" child node from the parent MFD driver. See + Documentation/devicetree/bindings/mfd/iqs62x.yaml for further details as + well as an example. + +allOf: + - $ref: pwm.yaml# + +properties: + compatible: + enum: + - azoteq,iqs620a-pwm + + "#pwm-cells": + const: 2 + +required: + - compatible + +additionalProperties: false + +... diff --git a/Documentation/devicetree/bindings/pwm/kontron,sl28cpld-pwm.yaml b/Documentation/devicetree/bindings/pwm/kontron,sl28cpld-pwm.yaml new file mode 100644 index 000000000..981cfec53 --- /dev/null +++ b/Documentation/devicetree/bindings/pwm/kontron,sl28cpld-pwm.yaml @@ -0,0 +1,35 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pwm/kontron,sl28cpld-pwm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: PWM driver for the sl28cpld board management controller + +maintainers: + - Michael Walle <michael@walle.cc> + +description: | + This module is part of the sl28cpld multi-function device. For more + details see ../mfd/kontron,sl28cpld.yaml. + + The controller supports one PWM channel and supports only four distinct + frequencies (250Hz, 500Hz, 1kHz, 2kHz). + +allOf: + - $ref: pwm.yaml# + +properties: + compatible: + const: kontron,sl28cpld-pwm + + reg: + maxItems: 1 + + "#pwm-cells": + const: 2 + +required: + - compatible + +additionalProperties: false diff --git a/Documentation/devicetree/bindings/pwm/lpc1850-sct-pwm.txt b/Documentation/devicetree/bindings/pwm/lpc1850-sct-pwm.txt new file mode 100644 index 000000000..43d9f4f08 --- /dev/null +++ b/Documentation/devicetree/bindings/pwm/lpc1850-sct-pwm.txt @@ -0,0 +1,20 @@ +* NXP LPC18xx State Configurable Timer - Pulse Width Modulator driver + +Required properties: + - compatible: Should be "nxp,lpc1850-sct-pwm" + - reg: Should contain physical base address and length of pwm registers. + - clocks: Must contain an entry for each entry in clock-names. + See ../clock/clock-bindings.txt for details. + - clock-names: Must include the following entries. + - pwm: PWM operating clock. + - #pwm-cells: Should be 3. See pwm.yaml in this directory for the description + of the cells format. + +Example: + pwm: pwm@40000000 { + compatible = "nxp,lpc1850-sct-pwm"; + reg = <0x40000000 0x1000>; + clocks =<&ccu1 CLK_CPU_SCT>; + clock-names = "pwm"; + #pwm-cells = <3>; + }; diff --git a/Documentation/devicetree/bindings/pwm/lpc32xx-pwm.txt b/Documentation/devicetree/bindings/pwm/lpc32xx-pwm.txt new file mode 100644 index 000000000..74b5bc5dd --- /dev/null +++ b/Documentation/devicetree/bindings/pwm/lpc32xx-pwm.txt @@ -0,0 +1,17 @@ +LPC32XX PWM controller + +Required properties: +- compatible: should be "nxp,lpc3220-pwm" +- reg: physical base address and length of the controller's registers + +Examples: + +pwm@4005c000 { + compatible = "nxp,lpc3220-pwm"; + reg = <0x4005c000 0x4>; +}; + +pwm@4005c004 { + compatible = "nxp,lpc3220-pwm"; + reg = <0x4005c004 0x4>; +}; diff --git a/Documentation/devicetree/bindings/pwm/mediatek,pwm-disp.yaml b/Documentation/devicetree/bindings/pwm/mediatek,pwm-disp.yaml new file mode 100644 index 000000000..0088bc8e7 --- /dev/null +++ b/Documentation/devicetree/bindings/pwm/mediatek,pwm-disp.yaml @@ -0,0 +1,76 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pwm/mediatek,pwm-disp.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek DISP_PWM Controller + +maintainers: + - Jitao Shi <jitao.shi@mediatek.com> + - Xinlei Lee <xinlei.lee@mediatek.com> + +allOf: + - $ref: pwm.yaml# + +properties: + compatible: + oneOf: + - enum: + - mediatek,mt2701-disp-pwm + - mediatek,mt6595-disp-pwm + - mediatek,mt8173-disp-pwm + - mediatek,mt8183-disp-pwm + - items: + - const: mediatek,mt8167-disp-pwm + - const: mediatek,mt8173-disp-pwm + - items: + - enum: + - mediatek,mt8186-disp-pwm + - mediatek,mt8188-disp-pwm + - mediatek,mt8192-disp-pwm + - mediatek,mt8195-disp-pwm + - const: mediatek,mt8183-disp-pwm + + reg: + maxItems: 1 + + "#pwm-cells": + const: 2 + + interrupts: + maxItems: 1 + + clocks: + items: + - description: Main Clock + - description: Mm Clock + + clock-names: + items: + - const: main + - const: mm + +required: + - compatible + - reg + - "#pwm-cells" + - clocks + - clock-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/mt8173-clk.h> + #include <dt-bindings/interrupt-controller/irq.h> + + pwm0: pwm@1401e000 { + compatible = "mediatek,mt8173-disp-pwm"; + reg = <0x1401e000 0x1000>; + #pwm-cells = <2>; + clocks = <&mmsys CLK_MM_DISP_PWM026M>, + <&mmsys CLK_MM_DISP_PWM0MM>; + clock-names = "main", "mm"; + }; diff --git a/Documentation/devicetree/bindings/pwm/microchip,corepwm.yaml b/Documentation/devicetree/bindings/pwm/microchip,corepwm.yaml new file mode 100644 index 000000000..cd8e9a890 --- /dev/null +++ b/Documentation/devicetree/bindings/pwm/microchip,corepwm.yaml @@ -0,0 +1,83 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) + +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pwm/microchip,corepwm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Microchip IP corePWM controller bindings + +maintainers: + - Conor Dooley <conor.dooley@microchip.com> + +description: | + corePWM is an 16 channel pulse width modulator FPGA IP + + https://www.microsemi.com/existing-parts/parts/152118 + +allOf: + - $ref: pwm.yaml# + +properties: + compatible: + items: + - const: microchip,corepwm-rtl-v4 + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + "#pwm-cells": + enum: [2, 3] + description: + The only flag supported by the controller is PWM_POLARITY_INVERTED. + + microchip,sync-update-mask: + description: | + Depending on how the IP is instantiated, there are two modes of operation. + In synchronous mode, all channels are updated at the beginning of the PWM period, + and in asynchronous mode updates happen as the control registers are written. + A 16 bit wide "SHADOW_REG_EN" parameter of the IP core controls whether synchronous + mode is possible for each channel, and is set by the bitstream programmed to the + FPGA. If the IP core is instantiated with SHADOW_REG_ENx=1, both registers that + control the duty cycle for channel x have a second "shadow"/buffer reg synthesised. + At runtime a bit wide register exposed to APB can be used to toggle on/off + synchronised mode for all channels it has been synthesised for. + Each bit of "microchip,sync-update-mask" corresponds to a PWM channel & represents + whether synchronous mode is possible for the PWM channel. + + $ref: /schemas/types.yaml#/definitions/uint32 + default: 0 + + microchip,dac-mode-mask: + description: | + Optional, per-channel Low Ripple DAC mode is possible on this IP core. It creates + a minimum period pulse train whose High/Low average is that of the chosen duty + cycle. This "DAC" will have far better bandwidth and ripple performance than the + standard PWM algorithm can achieve. A 16 bit DAC_MODE module parameter of the IP + core, set at instantiation and by the bitstream programmed to the FPGA, determines + whether a given channel operates in regular PWM or DAC mode. + Each bit corresponds to a PWM channel & represents whether DAC mode is enabled + for that channel. + + $ref: /schemas/types.yaml#/definitions/uint32 + default: 0 + +required: + - compatible + - reg + - clocks + +additionalProperties: false + +examples: + - | + pwm@41000000 { + compatible = "microchip,corepwm-rtl-v4"; + microchip,sync-update-mask = /bits/ 32 <0>; + clocks = <&clkcfg 30>; + reg = <0x41000000 0xF0>; + #pwm-cells = <2>; + }; diff --git a/Documentation/devicetree/bindings/pwm/mxs-pwm.yaml b/Documentation/devicetree/bindings/pwm/mxs-pwm.yaml new file mode 100644 index 000000000..a34cbc13f --- /dev/null +++ b/Documentation/devicetree/bindings/pwm/mxs-pwm.yaml @@ -0,0 +1,45 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pwm/mxs-pwm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale MXS PWM controller + +maintainers: + - Shawn Guo <shawnguo@kernel.org> + - Anson Huang <anson.huang@nxp.com> + +allOf: + - $ref: pwm.yaml# + +properties: + compatible: + enum: + - fsl,imx23-pwm + + reg: + maxItems: 1 + + "#pwm-cells": + const: 3 + + fsl,pwm-number: + $ref: '/schemas/types.yaml#/definitions/uint32' + description: u32 value representing the number of PWM devices + +required: + - compatible + - reg + - fsl,pwm-number + +additionalProperties: false + +examples: + - | + pwm@80064000 { + compatible = "fsl,imx23-pwm"; + reg = <0x80064000 0x2000>; + #pwm-cells = <3>; + fsl,pwm-number = <8>; + }; diff --git a/Documentation/devicetree/bindings/pwm/nvidia,tegra20-pwm.txt b/Documentation/devicetree/bindings/pwm/nvidia,tegra20-pwm.txt new file mode 100644 index 000000000..74c41e34c --- /dev/null +++ b/Documentation/devicetree/bindings/pwm/nvidia,tegra20-pwm.txt @@ -0,0 +1,77 @@ +Tegra SoC PWFM controller + +Required properties: +- compatible: Must be: + - "nvidia,tegra20-pwm": for Tegra20 + - "nvidia,tegra30-pwm", "nvidia,tegra20-pwm": for Tegra30 + - "nvidia,tegra114-pwm", "nvidia,tegra20-pwm": for Tegra114 + - "nvidia,tegra124-pwm", "nvidia,tegra20-pwm": for Tegra124 + - "nvidia,tegra132-pwm", "nvidia,tegra20-pwm": for Tegra132 + - "nvidia,tegra210-pwm", "nvidia,tegra20-pwm": for Tegra210 + - "nvidia,tegra186-pwm": for Tegra186 + - "nvidia,tegra194-pwm": for Tegra194 +- reg: physical base address and length of the controller's registers +- #pwm-cells: should be 2. See pwm.yaml in this directory for a description of + the cells format. +- clocks: Must contain one entry, for the module clock. + See ../clocks/clock-bindings.txt for details. +- resets: Must contain an entry for each entry in reset-names. + See ../reset/reset.txt for details. +- reset-names: Must include the following entries: + - pwm + +Optional properties: +============================ +In some of the interface like PWM based regulator device, it is required +to configure the pins differently in different states, especially in suspend +state of the system. The configuration of pin is provided via the pinctrl +DT node as detailed in the pinctrl DT binding document + Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt + +The PWM node will have following optional properties. +pinctrl-names: Pin state names. Must be "default" and "sleep". +pinctrl-0: phandle for the default/active state of pin configurations. +pinctrl-1: phandle for the sleep state of pin configurations. + +Example: + + pwm: pwm@7000a000 { + compatible = "nvidia,tegra20-pwm"; + reg = <0x7000a000 0x100>; + #pwm-cells = <2>; + clocks = <&tegra_car 17>; + resets = <&tegra_car 17>; + reset-names = "pwm"; + }; + + +Example with the pin configuration for suspend and resume: +========================================================= +Suppose pin PE7 (On Tegra210) interfaced with the regulator device and +it requires PWM output to be tristated when system enters suspend. +Following will be DT binding to achieve this: + +#include <dt-bindings/pinctrl/pinctrl-tegra.h> + + pinmux@700008d4 { + pwm_active_state: pwm_active_state { + pe7 { + nvidia,pins = "pe7"; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + }; + + pwm_sleep_state: pwm_sleep_state { + pe7 { + nvidia,pins = "pe7"; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + }; + }; + }; + + pwm@7000a000 { + /* Mandatory PWM properties */ + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&pwm_active_state>; + pinctrl-1 = <&pwm_sleep_state>; + }; diff --git a/Documentation/devicetree/bindings/pwm/nxp,pca9685-pwm.txt b/Documentation/devicetree/bindings/pwm/nxp,pca9685-pwm.txt new file mode 100644 index 000000000..f21b55c95 --- /dev/null +++ b/Documentation/devicetree/bindings/pwm/nxp,pca9685-pwm.txt @@ -0,0 +1,27 @@ +NXP PCA9685 16-channel 12-bit PWM LED controller +================================================ + +Required properties: + - compatible: "nxp,pca9685-pwm" + - #pwm-cells: Should be 2. See pwm.yaml in this directory for a description of + the cells format. + The index 16 is the ALLCALL channel, that sets all PWM channels at the same + time. + +Optional properties: + - invert (bool): boolean to enable inverted logic + - open-drain (bool): boolean to configure outputs with open-drain structure; + if omitted use totem-pole structure + +Example: + +For LEDs that are directly connected to the PCA, the following setting is +applicable: + +pca: pca@41 { + compatible = "nxp,pca9685-pwm"; + #pwm-cells = <2>; + reg = <0x41>; + invert; + open-drain; +}; diff --git a/Documentation/devicetree/bindings/pwm/pwm-bcm2835.txt b/Documentation/devicetree/bindings/pwm/pwm-bcm2835.txt new file mode 100644 index 000000000..f5753b3f7 --- /dev/null +++ b/Documentation/devicetree/bindings/pwm/pwm-bcm2835.txt @@ -0,0 +1,30 @@ +BCM2835 PWM controller (Raspberry Pi controller) + +Required properties: +- compatible: should be "brcm,bcm2835-pwm" +- reg: physical base address and length of the controller's registers +- clocks: This clock defines the base clock frequency of the PWM hardware + system, the period and the duty_cycle of the PWM signal is a multiple of + the base period. +- #pwm-cells: Should be 3. See pwm.yaml in this directory for a description of + the cells format. + +Examples: + +pwm@2020c000 { + compatible = "brcm,bcm2835-pwm"; + reg = <0x2020c000 0x28>; + clocks = <&clk_pwm>; + #pwm-cells = <3>; +}; + +clocks { + .... + clk_pwm: pwm { + compatible = "fixed-clock"; + reg = <3>; + #clock-cells = <0>; + clock-frequency = <9200000>; + }; + .... +}; diff --git a/Documentation/devicetree/bindings/pwm/pwm-berlin.txt b/Documentation/devicetree/bindings/pwm/pwm-berlin.txt new file mode 100644 index 000000000..f01e993a4 --- /dev/null +++ b/Documentation/devicetree/bindings/pwm/pwm-berlin.txt @@ -0,0 +1,17 @@ +Berlin PWM controller + +Required properties: +- compatible: should be "marvell,berlin-pwm" +- reg: physical base address and length of the controller's registers +- clocks: phandle to the input clock +- #pwm-cells: should be 3. See pwm.yaml in this directory for a description of + the cells format. + +Example: + +pwm: pwm@f7f20000 { + compatible = "marvell,berlin-pwm"; + reg = <0xf7f20000 0x40>; + clocks = <&chip_clk CLKID_CFG>; + #pwm-cells = <3>; +} diff --git a/Documentation/devicetree/bindings/pwm/pwm-fsl-ftm.txt b/Documentation/devicetree/bindings/pwm/pwm-fsl-ftm.txt new file mode 100644 index 000000000..36532cd5a --- /dev/null +++ b/Documentation/devicetree/bindings/pwm/pwm-fsl-ftm.txt @@ -0,0 +1,55 @@ +Freescale FlexTimer Module (FTM) PWM controller + +The same FTM PWM device can have a different endianness on different SoCs. The +device tree provides a property to describing this so that an operating system +device driver can handle all variants of the device. Refer to the table below +for the endianness of the FTM PWM block as integrated into the existing SoCs: + + SoC | FTM-PWM endianness + --------+------------------- + Vybrid | LE + LS1 | BE + LS2 | LE + +Please see ../regmap/regmap.txt for more detail about how to specify endian +modes in device tree. + + +Required properties: +- compatible : should be "fsl,<soc>-ftm-pwm" and one of the following + compatible strings: + - "fsl,vf610-ftm-pwm" for PWM compatible with the one integrated on VF610 + - "fsl,imx8qm-ftm-pwm" for PWM compatible with the one integrated on i.MX8QM +- reg: Physical base address and length of the controller's registers +- #pwm-cells: Should be 3. See pwm.yaml in this directory for a description of + the cells format. +- clock-names: Should include the following module clock source entries: + "ftm_sys" (module clock, also can be used as counter clock), + "ftm_ext" (external counter clock), + "ftm_fix" (fixed counter clock), + "ftm_cnt_clk_en" (external and fixed counter clock enable/disable). +- clocks: Must contain a phandle and clock specifier for each entry in + clock-names, please see clock/clock-bindings.txt for details of the property + values. +- pinctrl-names: Must contain a "default" entry. +- pinctrl-NNN: One property must exist for each entry in pinctrl-names. + See pinctrl/pinctrl-bindings.txt for details of the property values. +- big-endian: Boolean property, required if the FTM PWM registers use a big- + endian rather than little-endian layout. + +Example: + +pwm0: pwm@40038000 { + compatible = "fsl,vf610-ftm-pwm"; + reg = <0x40038000 0x1000>; + #pwm-cells = <3>; + clock-names = "ftm_sys", "ftm_ext", + "ftm_fix", "ftm_cnt_clk_en"; + clocks = <&clks VF610_CLK_FTM0>, + <&clks VF610_CLK_FTM0_EXT_SEL>, + <&clks VF610_CLK_FTM0_FIX_SEL>, + <&clks VF610_CLK_FTM0_EXT_FIX_EN>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm0_1>; + big-endian; +}; diff --git a/Documentation/devicetree/bindings/pwm/pwm-hibvt.txt b/Documentation/devicetree/bindings/pwm/pwm-hibvt.txt new file mode 100644 index 000000000..54dbc2a0e --- /dev/null +++ b/Documentation/devicetree/bindings/pwm/pwm-hibvt.txt @@ -0,0 +1,23 @@ +Hisilicon PWM controller + +Required properties: +-compatible: should contain one SoC specific compatible string + The SoC specific strings supported including: + "hisilicon,hi3516cv300-pwm" + "hisilicon,hi3519v100-pwm" + "hisilicon,hi3559v100-shub-pwm" + "hisilicon,hi3559v100-pwm +- reg: physical base address and length of the controller's registers. +- clocks: phandle and clock specifier of the PWM reference clock. +- resets: phandle and reset specifier for the PWM controller reset. +- #pwm-cells: Should be 3. See pwm.yaml in this directory for a description of + the cells format. + +Example: + pwm: pwm@12130000 { + compatible = "hisilicon,hi3516cv300-pwm"; + reg = <0x12130000 0x10000>; + clocks = <&crg_ctrl HI3516CV300_PWM_CLK>; + resets = <&crg_ctrl 0x38 0>; + #pwm-cells = <3>; + }; diff --git a/Documentation/devicetree/bindings/pwm/pwm-lp3943.txt b/Documentation/devicetree/bindings/pwm/pwm-lp3943.txt new file mode 100644 index 000000000..f214305a8 --- /dev/null +++ b/Documentation/devicetree/bindings/pwm/pwm-lp3943.txt @@ -0,0 +1,58 @@ +TI/National Semiconductor LP3943 PWM controller + +Required properties: + - compatible: "ti,lp3943-pwm" + - #pwm-cells: Should be 2. See pwm.yaml in this directory for a + description of the cells format. + Note that this hardware limits the period length to the + range 6250~1600000. + - ti,pwm0 or ti,pwm1: Output pin number(s) for PWM channel 0 or 1. + 0 = output 0 + 1 = output 1 + . + . + 15 = output 15 + +Example: +PWM 0 is for RGB LED brightness control +PWM 1 is for brightness control of LP8557 backlight device + +&i2c3 { + lp3943@60 { + compatible = "ti,lp3943"; + reg = <0x60>; + + /* + * PWM 0 : output 8, 9 and 10 + * PWM 1 : output 15 + */ + pwm3943: pwm { + compatible = "ti,lp3943-pwm"; + #pwm-cells = <2>; + ti,pwm0 = <8 9 10>; + ti,pwm1 = <15>; + }; + }; + +}; + +/* LEDs control with PWM 0 of LP3943 */ +pwmleds { + compatible = "pwm-leds"; + rgb { + label = "indi::rgb"; + pwms = <&pwm3943 0 10000>; + max-brightness = <255>; + }; +}; + +&i2c4 { + /* Backlight control with PWM 1 of LP3943 */ + backlight@2c { + compatible = "ti,lp8557"; + reg = <0x2c>; + + pwms = <&pwm3943 1 10000>; + pwm-names = "lp8557"; + }; +}; diff --git a/Documentation/devicetree/bindings/pwm/pwm-mediatek.txt b/Documentation/devicetree/bindings/pwm/pwm-mediatek.txt new file mode 100644 index 000000000..554c96b6d --- /dev/null +++ b/Documentation/devicetree/bindings/pwm/pwm-mediatek.txt @@ -0,0 +1,52 @@ +MediaTek PWM controller + +Required properties: + - compatible: should be "mediatek,<name>-pwm": + - "mediatek,mt2712-pwm": found on mt2712 SoC. + - "mediatek,mt6795-pwm": found on mt6795 SoC. + - "mediatek,mt7622-pwm": found on mt7622 SoC. + - "mediatek,mt7623-pwm": found on mt7623 SoC. + - "mediatek,mt7628-pwm": found on mt7628 SoC. + - "mediatek,mt7629-pwm": found on mt7629 SoC. + - "mediatek,mt8183-pwm": found on mt8183 SoC. + - "mediatek,mt8195-pwm", "mediatek,mt8183-pwm": found on mt8195 SoC. + - "mediatek,mt8365-pwm": found on mt8365 SoC. + - "mediatek,mt8516-pwm": found on mt8516 SoC. + - reg: physical base address and length of the controller's registers. + - #pwm-cells: must be 2. See pwm.yaml in this directory for a description of + the cell format. + - clocks: phandle and clock specifier of the PWM reference clock. + - clock-names: must contain the following, except for MT7628 which + has no clocks + - "top": the top clock generator + - "main": clock used by the PWM core + - "pwm1-3": the three per PWM clocks for mt8365 + - "pwm1-8": the eight per PWM clocks for mt2712 + - "pwm1-6": the six per PWM clocks for mt7622 + - "pwm1-5": the five per PWM clocks for mt7623 + - "pwm1" : the PWM1 clock for mt7629 + - pinctrl-names: Must contain a "default" entry. + - pinctrl-0: One property must exist for each entry in pinctrl-names. + See pinctrl/pinctrl-bindings.txt for details of the property values. + +Optional properties: +- assigned-clocks: Reference to the PWM clock entries. +- assigned-clock-parents: The phandle of the parent clock of PWM clock. + +Example: + pwm0: pwm@11006000 { + compatible = "mediatek,mt7623-pwm"; + reg = <0 0x11006000 0 0x1000>; + #pwm-cells = <2>; + clocks = <&topckgen CLK_TOP_PWM_SEL>, + <&pericfg CLK_PERI_PWM>, + <&pericfg CLK_PERI_PWM1>, + <&pericfg CLK_PERI_PWM2>, + <&pericfg CLK_PERI_PWM3>, + <&pericfg CLK_PERI_PWM4>, + <&pericfg CLK_PERI_PWM5>; + clock-names = "top", "main", "pwm1", "pwm2", + "pwm3", "pwm4", "pwm5"; + pinctrl-names = "default"; + pinctrl-0 = <&pwm0_pins>; + }; diff --git a/Documentation/devicetree/bindings/pwm/pwm-meson.txt b/Documentation/devicetree/bindings/pwm/pwm-meson.txt new file mode 100644 index 000000000..bd02b0a14 --- /dev/null +++ b/Documentation/devicetree/bindings/pwm/pwm-meson.txt @@ -0,0 +1,29 @@ +Amlogic Meson PWM Controller +============================ + +Required properties: +- compatible: Shall contain "amlogic,meson8b-pwm" + or "amlogic,meson-gxbb-pwm" + or "amlogic,meson-gxbb-ao-pwm" + or "amlogic,meson-axg-ee-pwm" + or "amlogic,meson-axg-ao-pwm" + or "amlogic,meson-g12a-ee-pwm" + or "amlogic,meson-g12a-ao-pwm-ab" + or "amlogic,meson-g12a-ao-pwm-cd" +- #pwm-cells: Should be 3. See pwm.yaml in this directory for a description of + the cells format. + +Optional properties: +- clocks: Could contain one or two parents clocks phandle for each of the two + PWM channels. +- clock-names: Could contain at least the "clkin0" and/or "clkin1" names. + +Example: + + pwm_ab: pwm@8550 { + compatible = "amlogic,meson-gxbb-pwm"; + reg = <0x0 0x08550 0x0 0x10>; + #pwm-cells = <3>; + clocks = <&xtal>, <&xtal>; + clock-names = "clkin0", "clkin1"; + } diff --git a/Documentation/devicetree/bindings/pwm/pwm-omap-dmtimer.txt b/Documentation/devicetree/bindings/pwm/pwm-omap-dmtimer.txt new file mode 100644 index 000000000..25ecfe14c --- /dev/null +++ b/Documentation/devicetree/bindings/pwm/pwm-omap-dmtimer.txt @@ -0,0 +1,22 @@ +* OMAP PWM for dual-mode timers + +Required properties: +- compatible: Shall contain "ti,omap-dmtimer-pwm". +- ti,timers: phandle to PWM capable OMAP timer. See timer/ti,timer-dm.yaml for info + about these timers. +- #pwm-cells: Should be 3. See pwm.yaml in this directory for a description of + the cells format. + +Optional properties: +- ti,prescaler: Should be a value between 0 and 7, see the timers datasheet +- ti,clock-source: Set dmtimer parent clock, values between 0 and 2: + - 0x00 - high-frequency system clock (timer_sys_ck) + - 0x01 - 32-kHz always-on clock (timer_32k_ck) + - 0x02 - external clock (timer_ext_ck, OMAP2 only) + +Example: + pwm9: dmtimer-pwm@9 { + compatible = "ti,omap-dmtimer-pwm"; + ti,timers = <&timer9>; + #pwm-cells = <3>; + }; diff --git a/Documentation/devicetree/bindings/pwm/pwm-rockchip.yaml b/Documentation/devicetree/bindings/pwm/pwm-rockchip.yaml new file mode 100644 index 000000000..f2d1dc7e7 --- /dev/null +++ b/Documentation/devicetree/bindings/pwm/pwm-rockchip.yaml @@ -0,0 +1,105 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pwm/pwm-rockchip.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Rockchip PWM controller + +maintainers: + - Heiko Stuebner <heiko@sntech.de> + +properties: + compatible: + oneOf: + - const: rockchip,rk2928-pwm + - const: rockchip,rk3288-pwm + - const: rockchip,rk3328-pwm + - const: rockchip,vop-pwm + - items: + - const: rockchip,rk3036-pwm + - const: rockchip,rk2928-pwm + - items: + - enum: + - rockchip,rk3128-pwm + - rockchip,rk3368-pwm + - rockchip,rk3399-pwm + - rockchip,rv1108-pwm + - const: rockchip,rk3288-pwm + - items: + - enum: + - rockchip,px30-pwm + - rockchip,rk3308-pwm + - rockchip,rk3568-pwm + - rockchip,rk3588-pwm + - const: rockchip,rk3328-pwm + + reg: + maxItems: 1 + + clocks: + minItems: 1 + maxItems: 2 + + clock-names: + maxItems: 2 + + "#pwm-cells": + enum: [2, 3] + description: + Must be 2 (rk2928) or 3 (rk3288 and later). + See pwm.yaml for a description of the cell format. + +required: + - compatible + - reg + +allOf: + - $ref: pwm.yaml# + + - if: + properties: + compatible: + contains: + enum: + - rockchip,rk3328-pwm + - rockchip,rv1108-pwm + + then: + properties: + clocks: + items: + - description: Used to derive the functional clock for the device. + - description: Used as the APB bus clock. + + clock-names: + items: + - const: pwm + - const: pclk + + required: + - clocks + - clock-names + + else: + properties: + clocks: + maxItems: 1 + description: + Used both to derive the functional clock + for the device and as the bus clock. + + required: + - clocks + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/rk3188-cru-common.h> + pwm0: pwm@20030000 { + compatible = "rockchip,rk2928-pwm"; + reg = <0x20030000 0x10>; + clocks = <&cru PCLK_PWM01>; + #pwm-cells = <2>; + }; diff --git a/Documentation/devicetree/bindings/pwm/pwm-samsung.yaml b/Documentation/devicetree/bindings/pwm/pwm-samsung.yaml new file mode 100644 index 000000000..fe603fb1b --- /dev/null +++ b/Documentation/devicetree/bindings/pwm/pwm-samsung.yaml @@ -0,0 +1,120 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pwm/pwm-samsung.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Samsung SoC PWM timers + +maintainers: + - Thierry Reding <thierry.reding@gmail.com> + - Krzysztof Kozlowski <krzk@kernel.org> + +description: |+ + Samsung SoCs contain PWM timer blocks which can be used for system clock source + and clock event timers, as well as to drive SoC outputs with PWM signal. Each + PWM timer block provides 5 PWM channels (not all of them can drive physical + outputs - see SoC and board manual). + + Be aware that the clocksource driver supports only uniprocessor systems. + +properties: + compatible: + enum: + - samsung,s3c2410-pwm # 16-bit, S3C24xx + - samsung,s3c6400-pwm # 32-bit, S3C64xx + - samsung,s5p6440-pwm # 32-bit, S5P64x0 + - samsung,s5pc100-pwm # 32-bit, S5PC100, S5PV210, Exynos4210 rev0 SoCs + - samsung,exynos4210-pwm # 32-bit, Exynos + + reg: + maxItems: 1 + + clocks: + minItems: 1 + maxItems: 3 + + clock-names: + description: | + Should contain all following required clock names: + - "timers" - PWM base clock used to generate PWM signals, + and any subset of following optional clock names: + - "pwm-tclk0" - first external PWM clock source, + - "pwm-tclk1" - second external PWM clock source. + Note that not all IP variants allow using all external clock sources. + Refer to SoC documentation to learn which clock source configurations + are available. + oneOf: + - items: + - const: timers + - items: + - const: timers + - const: pwm-tclk0 + - items: + - const: timers + - const: pwm-tclk1 + - items: + - const: timers + - const: pwm-tclk0 + - const: pwm-tclk1 + + interrupts: + description: + One interrupt per timer, starting at timer 0. Necessary only for SoCs which + use PWM clocksource. + minItems: 1 + maxItems: 5 + + "#pwm-cells": + description: + The only third cell flag supported by this binding + is PWM_POLARITY_INVERTED. + const: 3 + + samsung,pwm-outputs: + description: + A list of PWM channels used as PWM outputs on particular platform. + It is an array of up to 5 elements being indices of PWM channels + (from 0 to 4), the order does not matter. + $ref: /schemas/types.yaml#/definitions/uint32-array + uniqueItems: true + items: + minimum: 0 + maximum: 4 + +required: + - clocks + - clock-names + - compatible + - reg + +additionalProperties: false + +allOf: + - $ref: pwm.yaml# + + - if: + properties: + compatible: + contains: + enum: + - samsung,s3c2410-pwm + - samsung,s3c6400-pwm + - samsung,s5p6440-pwm + - samsung,s5pc100-pwm + then: + required: + - interrupts + +examples: + - | + pwm@7f006000 { + compatible = "samsung,s3c6400-pwm"; + reg = <0x7f006000 0x1000>; + interrupt-parent = <&vic0>; + interrupts = <23>, <24>, <25>, <27>, <28>; + clocks = <&clock 67>; + clock-names = "timers"; + samsung,pwm-outputs = <0>, <1>; + #pwm-cells = <3>; + }; diff --git a/Documentation/devicetree/bindings/pwm/pwm-sifive.yaml b/Documentation/devicetree/bindings/pwm/pwm-sifive.yaml new file mode 100644 index 000000000..605c1766d --- /dev/null +++ b/Documentation/devicetree/bindings/pwm/pwm-sifive.yaml @@ -0,0 +1,73 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (C) 2020 SiFive, Inc. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pwm/pwm-sifive.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: SiFive PWM controller + +maintainers: + - Sagar Kadam <sagar.kadam@sifive.com> + - Paul Walmsley <paul.walmsley@sifive.com> + +description: + Unlike most other PWM controllers, the SiFive PWM controller currently + only supports one period for all channels in the PWM. All PWMs need to + run at the same period. The period also has significant restrictions on + the values it can achieve, which the driver rounds to the nearest + achievable period. PWM RTL that corresponds to the IP block version + numbers can be found here - + + https://github.com/sifive/sifive-blocks/tree/master/src/main/scala/devices/pwm + +allOf: + - $ref: pwm.yaml# + +properties: + compatible: + items: + - enum: + - sifive,fu540-c000-pwm + - sifive,fu740-c000-pwm + - const: sifive,pwm0 + description: + Should be "sifive,<chip>-pwm" and "sifive,pwm<version>". Supported + compatible strings are "sifive,fu540-c000-pwm" and + "sifive,fu740-c000-pwm" for the SiFive PWM v0 as integrated onto the + SiFive FU540 and FU740 chip respectively, and "sifive,pwm0" for the + SiFive PWM v0 IP block with no chip integration tweaks. + Please refer to sifive-blocks-ip-versioning.txt for details. + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + "#pwm-cells": + const: 3 + + interrupts: + maxItems: 4 + description: + Each PWM instance in FU540-C000 has 4 comparators. One interrupt per comparator. + +required: + - compatible + - reg + - clocks + - interrupts + +additionalProperties: false + +examples: + - | + pwm: pwm@10020000 { + compatible = "sifive,fu540-c000-pwm", "sifive,pwm0"; + reg = <0x10020000 0x1000>; + clocks = <&tlclk>; + interrupt-parent = <&plic>; + interrupts = <42>, <43>, <44>, <45>; + #pwm-cells = <3>; + }; diff --git a/Documentation/devicetree/bindings/pwm/pwm-sprd.txt b/Documentation/devicetree/bindings/pwm/pwm-sprd.txt new file mode 100644 index 000000000..87b206fd0 --- /dev/null +++ b/Documentation/devicetree/bindings/pwm/pwm-sprd.txt @@ -0,0 +1,40 @@ +Spreadtrum PWM controller + +Spreadtrum SoCs PWM controller provides 4 PWM channels. + +Required properties: +- compatible : Should be "sprd,ums512-pwm". +- reg: Physical base address and length of the controller's registers. +- clocks: The phandle and specifier referencing the controller's clocks. +- clock-names: Should contain following entries: + "pwmn": used to derive the functional clock for PWM channel n (n range: 0 ~ 3). + "enablen": for PWM channel n enable clock (n range: 0 ~ 3). +- #pwm-cells: Should be 2. See pwm.yaml in this directory for a description of + the cells format. + +Optional properties: +- assigned-clocks: Reference to the PWM clock entries. +- assigned-clock-parents: The phandle of the parent clock of PWM clock. + +Example: + pwms: pwm@32260000 { + compatible = "sprd,ums512-pwm"; + reg = <0 0x32260000 0 0x10000>; + clock-names = "pwm0", "enable0", + "pwm1", "enable1", + "pwm2", "enable2", + "pwm3", "enable3"; + clocks = <&aon_clk CLK_PWM0>, <&aonapb_gate CLK_PWM0_EB>, + <&aon_clk CLK_PWM1>, <&aonapb_gate CLK_PWM1_EB>, + <&aon_clk CLK_PWM2>, <&aonapb_gate CLK_PWM2_EB>, + <&aon_clk CLK_PWM3>, <&aonapb_gate CLK_PWM3_EB>; + assigned-clocks = <&aon_clk CLK_PWM0>, + <&aon_clk CLK_PWM1>, + <&aon_clk CLK_PWM2>, + <&aon_clk CLK_PWM3>; + assigned-clock-parents = <&ext_26m>, + <&ext_26m>, + <&ext_26m>, + <&ext_26m>; + #pwm-cells = <2>; + }; diff --git a/Documentation/devicetree/bindings/pwm/pwm-st.txt b/Documentation/devicetree/bindings/pwm/pwm-st.txt new file mode 100644 index 000000000..19fce774c --- /dev/null +++ b/Documentation/devicetree/bindings/pwm/pwm-st.txt @@ -0,0 +1,43 @@ +STMicroelectronics PWM driver bindings +-------------------------------------- + +Required parameters: +- compatible : "st,pwm" +- #pwm-cells : Number of cells used to specify a PWM. First cell + specifies the per-chip index of the PWM to use and the + second cell is the period in nanoseconds - fixed to 2 + for STiH41x. +- reg : Physical base address and length of the controller's + registers. +- pinctrl-names: Set to "default". +- pinctrl-0: List of phandles pointing to pin configuration nodes + for PWM module. + For Pinctrl properties, please refer to [1]. +- clock-names: Valid entries are "pwm" and/or "capture". +- clocks: phandle of the clock used by the PWM module. + For Clk properties, please refer to [2]. +- interrupts: IRQ for the Capture device + +Optional properties: +- st,pwm-num-chan: Number of available PWM channels. Default is 0. +- st,capture-num-chan: Number of available Capture channels. Default is 0. + +[1] Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt +[2] Documentation/devicetree/bindings/clock/clock-bindings.txt + +Example: + +pwm1: pwm@fe510000 { + compatible = "st,pwm"; + reg = <0xfe510000 0x68>; + #pwm-cells = <2>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm1_chan0_default + &pinctrl_pwm1_chan1_default + &pinctrl_pwm1_chan2_default + &pinctrl_pwm1_chan3_default>; + clocks = <&clk_sysin>; + clock-names = "pwm"; + st,pwm-num-chan = <4>; + st,capture-num-chan = <2>; +}; diff --git a/Documentation/devicetree/bindings/pwm/pwm-tiecap.yaml b/Documentation/devicetree/bindings/pwm/pwm-tiecap.yaml new file mode 100644 index 000000000..3840ae709 --- /dev/null +++ b/Documentation/devicetree/bindings/pwm/pwm-tiecap.yaml @@ -0,0 +1,63 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pwm/pwm-tiecap.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TI SOC ECAP based APWM controller + +maintainers: + - Vignesh R <vigneshr@ti.com> + +allOf: + - $ref: pwm.yaml# + +properties: + compatible: + oneOf: + - const: ti,am3352-ecap + - items: + - enum: + - ti,da850-ecap + - ti,am4372-ecap + - ti,dra746-ecap + - ti,k2g-ecap + - ti,am654-ecap + - ti,am64-ecap + - const: ti,am3352-ecap + + reg: + maxItems: 1 + + "#pwm-cells": + const: 3 + description: | + See pwm.yaml in this directory for a description of the cells format. + The only third cell flag supported by this binding is PWM_POLARITY_INVERTED. + + clock-names: + const: fck + + clocks: + maxItems: 1 + + power-domains: + maxItems: 1 + +required: + - compatible + - reg + - clocks + - clock-names + +additionalProperties: false + +examples: + - | + ecap0: pwm@48300100 { /* ECAP on am33xx */ + compatible = "ti,am3352-ecap"; + #pwm-cells = <3>; + reg = <0x48300100 0x80>; + clocks = <&l4ls_gclk>; + clock-names = "fck"; + }; diff --git a/Documentation/devicetree/bindings/pwm/pwm-tiehrpwm.yaml b/Documentation/devicetree/bindings/pwm/pwm-tiehrpwm.yaml new file mode 100644 index 000000000..70a8f7662 --- /dev/null +++ b/Documentation/devicetree/bindings/pwm/pwm-tiehrpwm.yaml @@ -0,0 +1,64 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pwm/pwm-tiehrpwm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TI SOC EHRPWM based PWM controller + +maintainers: + - Vignesh R <vigneshr@ti.com> + +allOf: + - $ref: pwm.yaml# + +properties: + compatible: + oneOf: + - const: ti,am3352-ehrpwm + - items: + - enum: + - ti,da850-ehrpwm + - ti,am4372-ehrpwm + - ti,dra746-ehrpwm + - ti,am654-ehrpwm + - ti,am64-epwm + - const: ti,am3352-ehrpwm + + reg: + maxItems: 1 + + "#pwm-cells": + const: 3 + description: | + See pwm.yaml in this directory for a description of the cells format. + The only third cell flag supported by this binding is PWM_POLARITY_INVERTED. + + clock-names: + items: + - const: tbclk + - const: fck + + clocks: + maxItems: 2 + + power-domains: + maxItems: 1 + +required: + - compatible + - reg + - clocks + - clock-names + +additionalProperties: false + +examples: + - | + ehrpwm0: pwm@48300200 { /* EHRPWM on am33xx */ + compatible = "ti,am3352-ehrpwm"; + #pwm-cells = <3>; + reg = <0x48300200 0x100>; + clocks = <&ehrpwm0_tbclk>, <&l4ls_gclk>; + clock-names = "tbclk", "fck"; + }; diff --git a/Documentation/devicetree/bindings/pwm/pwm-tipwmss.txt b/Documentation/devicetree/bindings/pwm/pwm-tipwmss.txt new file mode 100644 index 000000000..4633697fb --- /dev/null +++ b/Documentation/devicetree/bindings/pwm/pwm-tipwmss.txt @@ -0,0 +1,58 @@ +TI SOC based PWM Subsystem + +Required properties: +- compatible: Must be "ti,<soc>-pwmss". + for am33xx - compatible = "ti,am33xx-pwmss"; + for am4372 - compatible = "ti,am4372-pwmss","ti,am33xx-pwmss"; + for dra746 - compatible = "ti,dra746-pwmss", "ti,am33xx-pwmss" + +- reg: physical base address and size of the registers map. +- address-cells: Specify the number of u32 entries needed in child nodes. + Should set to 1. +- size-cells: specify number of u32 entries needed to specify child nodes size + in reg property. Should set to 1. +- ranges: describes the address mapping of a memory-mapped bus. Should set to + physical address map of child's base address, physical address within + parent's address space and length of the address map. For am33xx, + 3 set of child register maps present, ECAP register space, EQEP + register space, EHRPWM register space. + +Also child nodes should also populated under PWMSS DT node. + +Example: +epwmss0: epwmss@48300000 { /* PWMSS for am33xx */ + compatible = "ti,am33xx-pwmss"; + reg = <0x48300000 0x10>; + ti,hwmods = "epwmss0"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x48300100 0x48300100 0x80 /* ECAP */ + 0x48300180 0x48300180 0x80 /* EQEP */ + 0x48300200 0x48300200 0x80>; /* EHRPWM */ + + /* child nodes go here */ +}; + +epwmss0: epwmss@48300000 { /* PWMSS for am4372 */ + compatible = "ti,am4372-pwmss","ti,am33xx-pwmss" + reg = <0x48300000 0x10>; + ti,hwmods = "epwmss0"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x48300100 0x48300100 0x80 /* ECAP */ + 0x48300180 0x48300180 0x80 /* EQEP */ + 0x48300200 0x48300200 0x80>; /* EHRPWM */ + + /* child nodes go here */ +}; + +epwmss0: epwmss@4843e000 { /* PWMSS for DRA7xx */ + compatible = "ti,dra746-pwmss", "ti,am33xx-pwmss"; + reg = <0x4843e000 0x30>; + ti,hwmods = "epwmss0"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + /* child nodes go here */ +}; diff --git a/Documentation/devicetree/bindings/pwm/pwm.txt b/Documentation/devicetree/bindings/pwm/pwm.txt new file mode 100644 index 000000000..084886bd7 --- /dev/null +++ b/Documentation/devicetree/bindings/pwm/pwm.txt @@ -0,0 +1,60 @@ +Specifying PWM information for devices +====================================== + +1) PWM user nodes +----------------- + +PWM users should specify a list of PWM devices that they want to use +with a property containing a 'pwm-list': + + pwm-list ::= <single-pwm> [pwm-list] + single-pwm ::= <pwm-phandle> <pwm-specifier> + pwm-phandle : phandle to PWM controller node + pwm-specifier : array of #pwm-cells specifying the given PWM + (controller specific) + +PWM properties should be named "pwms". The exact meaning of each pwms +property must be documented in the device tree binding for each device. +An optional property "pwm-names" may contain a list of strings to label +each of the PWM devices listed in the "pwms" property. If no "pwm-names" +property is given, the name of the user node will be used as fallback. + +Drivers for devices that use more than a single PWM device can use the +"pwm-names" property to map the name of the PWM device requested by the +pwm_get() call to an index into the list given by the "pwms" property. + +The following example could be used to describe a PWM-based backlight +device: + + pwm: pwm { + #pwm-cells = <2>; + }; + + [...] + + bl: backlight { + pwms = <&pwm 0 5000000>; + pwm-names = "backlight"; + }; + +Note that in the example above, specifying the "pwm-names" is redundant +because the name "backlight" would be used as fallback anyway. + +pwm-specifier typically encodes the chip-relative PWM number and the PWM +period in nanoseconds. + +Optionally, the pwm-specifier can encode a number of flags (defined in +<dt-bindings/pwm/pwm.h>) in a third cell: +- PWM_POLARITY_INVERTED: invert the PWM signal polarity + +Example with optional PWM specifier for inverse polarity + + bl: backlight { + pwms = <&pwm 0 5000000 PWM_POLARITY_INVERTED>; + pwm-names = "backlight"; + }; + +2) PWM controller nodes +----------------------- + +See pwm.yaml. diff --git a/Documentation/devicetree/bindings/pwm/pwm.yaml b/Documentation/devicetree/bindings/pwm/pwm.yaml new file mode 100644 index 000000000..3c01f8502 --- /dev/null +++ b/Documentation/devicetree/bindings/pwm/pwm.yaml @@ -0,0 +1,34 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pwm/pwm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: PWM controllers (providers) + +maintainers: + - Thierry Reding <thierry.reding@gmail.com> + +select: false + +properties: + $nodename: + pattern: "^pwm(@.*|-[0-9a-f])*$" + + "#pwm-cells": + description: + Number of cells in a PWM specifier. + +required: + - "#pwm-cells" + +additionalProperties: true + +examples: + - | + pwm: pwm@1c20e00 { + compatible = "allwinner,sun7i-a20-pwm"; + reg = <0x01c20e00 0xc>; + clocks = <&osc24M>; + #pwm-cells = <3>; + }; diff --git a/Documentation/devicetree/bindings/pwm/pxa-pwm.txt b/Documentation/devicetree/bindings/pwm/pxa-pwm.txt new file mode 100644 index 000000000..5ae9f1e3c --- /dev/null +++ b/Documentation/devicetree/bindings/pwm/pxa-pwm.txt @@ -0,0 +1,30 @@ +Marvell PWM controller + +Required properties: +- compatible: should be one or more of: + - "marvell,pxa250-pwm" + - "marvell,pxa270-pwm" + - "marvell,pxa168-pwm" + - "marvell,pxa910-pwm" +- reg: Physical base address and length of the registers used by the PWM channel + Note that one device instance must be created for each PWM that is used, so the + length covers only the register window for one PWM output, not that of the + entire PWM controller. Currently length is 0x10 for all supported devices. +- #pwm-cells: Should be 1. This cell is used to specify the period in + nanoseconds. + +Example PWM device node: + +pwm0: pwm@40b00000 { + compatible = "marvell,pxa250-pwm"; + reg = <0x40b00000 0x10>; + #pwm-cells = <1>; +}; + +Example PWM client node: + +backlight { + compatible = "pwm-backlight"; + pwms = <&pwm0 5000000>; + ... +} diff --git a/Documentation/devicetree/bindings/pwm/renesas,pwm-rcar.yaml b/Documentation/devicetree/bindings/pwm/renesas,pwm-rcar.yaml new file mode 100644 index 000000000..1c94acbc2 --- /dev/null +++ b/Documentation/devicetree/bindings/pwm/renesas,pwm-rcar.yaml @@ -0,0 +1,96 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pwm/renesas,pwm-rcar.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas R-Car PWM Timer Controller + +maintainers: + - Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> + +properties: + compatible: + items: + - enum: + - renesas,pwm-r8a7742 # RZ/G1H + - renesas,pwm-r8a7743 # RZ/G1M + - renesas,pwm-r8a7744 # RZ/G1N + - renesas,pwm-r8a7745 # RZ/G1E + - renesas,pwm-r8a77470 # RZ/G1C + - renesas,pwm-r8a774a1 # RZ/G2M + - renesas,pwm-r8a774b1 # RZ/G2N + - renesas,pwm-r8a774c0 # RZ/G2E + - renesas,pwm-r8a774e1 # RZ/G2H + - renesas,pwm-r8a7778 # R-Car M1A + - renesas,pwm-r8a7779 # R-Car H1 + - renesas,pwm-r8a7790 # R-Car H2 + - renesas,pwm-r8a7791 # R-Car M2-W + - renesas,pwm-r8a7794 # R-Car E2 + - renesas,pwm-r8a7795 # R-Car H3 + - renesas,pwm-r8a7796 # R-Car M3-W + - renesas,pwm-r8a77961 # R-Car M3-W+ + - renesas,pwm-r8a77965 # R-Car M3-N + - renesas,pwm-r8a77970 # R-Car V3M + - renesas,pwm-r8a77980 # R-Car V3H + - renesas,pwm-r8a77990 # R-Car E3 + - renesas,pwm-r8a77995 # R-Car D3 + - const: renesas,pwm-rcar + + reg: + # base address and length of the registers block for the PWM. + maxItems: 1 + + '#pwm-cells': + # should be 2. See pwm.yaml in this directory for a description of + # the cells format. + const: 2 + + clocks: + # clock phandle and specifier pair. + maxItems: 1 + + power-domains: + maxItems: 1 + + resets: + maxItems: 1 + +required: + - compatible + - reg + - clocks + - power-domains + +allOf: + - $ref: pwm.yaml# + + - if: + not: + properties: + compatible: + contains: + enum: + - renesas,pwm-r8a7778 + - renesas,pwm-r8a7779 + then: + required: + - resets + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/r8a7743-cpg-mssr.h> + #include <dt-bindings/power/r8a7743-sysc.h> + + pwm0: pwm@e6e30000 { + compatible = "renesas,pwm-r8a7743", "renesas,pwm-rcar"; + reg = <0xe6e30000 0x8>; + clocks = <&cpg CPG_MOD 523>; + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>; + resets = <&cpg 523>; + #pwm-cells = <2>; + pinctrl-0 = <&pwm0_pins>; + pinctrl-names = "default"; + }; diff --git a/Documentation/devicetree/bindings/pwm/renesas,tpu-pwm.yaml b/Documentation/devicetree/bindings/pwm/renesas,tpu-pwm.yaml new file mode 100644 index 000000000..c6b2ab56b --- /dev/null +++ b/Documentation/devicetree/bindings/pwm/renesas,tpu-pwm.yaml @@ -0,0 +1,101 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pwm/renesas,tpu-pwm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas R-Car Timer Pulse Unit PWM Controller + +maintainers: + - Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> + +select: + properties: + compatible: + contains: + const: renesas,tpu + required: + - compatible + - '#pwm-cells' + +properties: + compatible: + items: + - enum: + - renesas,tpu-r8a73a4 # R-Mobile APE6 + - renesas,tpu-r8a7740 # R-Mobile A1 + - renesas,tpu-r8a7742 # RZ/G1H + - renesas,tpu-r8a7743 # RZ/G1M + - renesas,tpu-r8a7744 # RZ/G1N + - renesas,tpu-r8a7745 # RZ/G1E + - renesas,tpu-r8a7790 # R-Car H2 + - renesas,tpu-r8a7791 # R-Car M2-W + - renesas,tpu-r8a7792 # R-Car V2H + - renesas,tpu-r8a7793 # R-Car M2-N + - renesas,tpu-r8a7794 # R-Car E2 + - renesas,tpu-r8a7795 # R-Car H3 + - renesas,tpu-r8a7796 # R-Car M3-W + - renesas,tpu-r8a77961 # R-Car M3-W+ + - renesas,tpu-r8a77965 # R-Car M3-N + - renesas,tpu-r8a77970 # R-Car V3M + - renesas,tpu-r8a77980 # R-Car V3H + - renesas,tpu-r8a779a0 # R-Car V3U + - const: renesas,tpu + + reg: + # Base address and length of each memory resource used by the PWM + # controller hardware module. + maxItems: 1 + + interrupts: + maxItems: 1 + + '#pwm-cells': + # should be 3. See pwm.yaml in this directory for a description of + # the cells format. The only third cell flag supported by this binding is + # PWM_POLARITY_INVERTED. + const: 3 + + clocks: + maxItems: 1 + + power-domains: + maxItems: 1 + + resets: + maxItems: 1 + +required: + - compatible + - reg + - clocks + - power-domains + +allOf: + - $ref: pwm.yaml# + + - if: + not: + properties: + compatible: + contains: + enum: + - renesas,tpu-r8a73a4 + - renesas,tpu-r8a7740 + then: + required: + - resets + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/r8a7740-clock.h> + + tpu: pwm@e6600000 { + compatible = "renesas,tpu-r8a7740", "renesas,tpu"; + reg = <0xe6600000 0x148>; + clocks = <&mstp3_clks R8A7740_CLK_TPU0>; + power-domains = <&pd_a3sp>; + #pwm-cells = <3>; + }; diff --git a/Documentation/devicetree/bindings/pwm/spear-pwm.txt b/Documentation/devicetree/bindings/pwm/spear-pwm.txt new file mode 100644 index 000000000..95894128b --- /dev/null +++ b/Documentation/devicetree/bindings/pwm/spear-pwm.txt @@ -0,0 +1,17 @@ +== ST SPEAr SoC PWM controller == + +Required properties: +- compatible: should be one of: + - "st,spear320-pwm" + - "st,spear1340-pwm" +- reg: physical base address and length of the controller's registers +- #pwm-cells: should be 2. See pwm.yaml in this directory for a description of + the cells format. + +Example: + + pwm: pwm@a8000000 { + compatible ="st,spear320-pwm"; + reg = <0xa8000000 0x1000>; + #pwm-cells = <2>; + }; diff --git a/Documentation/devicetree/bindings/pwm/st,stmpe-pwm.txt b/Documentation/devicetree/bindings/pwm/st,stmpe-pwm.txt new file mode 100644 index 000000000..f401316e0 --- /dev/null +++ b/Documentation/devicetree/bindings/pwm/st,stmpe-pwm.txt @@ -0,0 +1,18 @@ +== ST STMPE PWM controller == + +This is a PWM block embedded in the ST Microelectronics STMPE +(ST Multi-Purpose Expander) chips. The PWM is registered as a +subdevices of the STMPE MFD device. + +Required properties: +- compatible: should be: + - "st,stmpe-pwm" +- #pwm-cells: should be 2. See pwm.yaml in this directory for a description of + the cells format. + +Example: + +pwm0: pwm { + compatible = "st,stmpe-pwm"; + #pwm-cells = <2>; +}; diff --git a/Documentation/devicetree/bindings/pwm/sunplus,sp7021-pwm.yaml b/Documentation/devicetree/bindings/pwm/sunplus,sp7021-pwm.yaml new file mode 100644 index 000000000..d4fc9e8db --- /dev/null +++ b/Documentation/devicetree/bindings/pwm/sunplus,sp7021-pwm.yaml @@ -0,0 +1,42 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (C) Sunplus Co., Ltd. 2021 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pwm/sunplus,sp7021-pwm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Sunplus SoC SP7021 PWM Controller + +maintainers: + - Hammer Hsieh <hammerh0314@gmail.com> + +allOf: + - $ref: pwm.yaml# + +properties: + compatible: + const: sunplus,sp7021-pwm + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + '#pwm-cells': + const: 2 + +unevaluatedProperties: false + +required: + - reg + - clocks + +examples: + - | + pwm: pwm@9c007a00 { + compatible = "sunplus,sp7021-pwm"; + reg = <0x9c007a00 0x80>; + clocks = <&clkc 0xa2>; + #pwm-cells = <2>; + }; diff --git a/Documentation/devicetree/bindings/pwm/ti,twl-pwm.txt b/Documentation/devicetree/bindings/pwm/ti,twl-pwm.txt new file mode 100644 index 000000000..d97ca1964 --- /dev/null +++ b/Documentation/devicetree/bindings/pwm/ti,twl-pwm.txt @@ -0,0 +1,17 @@ +Texas Instruments TWL series PWM drivers + +Supported PWMs: +On TWL4030 series: PWM1 and PWM2 +On TWL6030 series: PWM0 and PWM1 + +Required properties: +- compatible: "ti,twl4030-pwm" or "ti,twl6030-pwm" +- #pwm-cells: should be 2. See pwm.yaml in this directory for a description of + the cells format. + +Example: + +twl_pwm: pwm { + compatible = "ti,twl6030-pwm"; + #pwm-cells = <2>; +}; diff --git a/Documentation/devicetree/bindings/pwm/ti,twl-pwmled.txt b/Documentation/devicetree/bindings/pwm/ti,twl-pwmled.txt new file mode 100644 index 000000000..31ca1b032 --- /dev/null +++ b/Documentation/devicetree/bindings/pwm/ti,twl-pwmled.txt @@ -0,0 +1,17 @@ +Texas Instruments TWL series PWM drivers connected to LED terminals + +Supported PWMs: +On TWL4030 series: PWMA and PWMB (connected to LEDA and LEDB terminals) +On TWL6030 series: LED PWM (mainly used as charging indicator LED) + +Required properties: +- compatible: "ti,twl4030-pwmled" or "ti,twl6030-pwmled" +- #pwm-cells: should be 2. See pwm.yaml in this directory for a description of + the cells format. + +Example: + +twl_pwmled: pwmled { + compatible = "ti,twl6030-pwmled"; + #pwm-cells = <2>; +}; diff --git a/Documentation/devicetree/bindings/pwm/toshiba,pwm-visconti.yaml b/Documentation/devicetree/bindings/pwm/toshiba,pwm-visconti.yaml new file mode 100644 index 000000000..46622661e --- /dev/null +++ b/Documentation/devicetree/bindings/pwm/toshiba,pwm-visconti.yaml @@ -0,0 +1,45 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pwm/toshiba,pwm-visconti.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Toshiba Visconti PWM Controller + +maintainers: + - Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp> + +allOf: + - $ref: pwm.yaml# + +properties: + compatible: + items: + - const: toshiba,visconti-pwm + + reg: + maxItems: 1 + + '#pwm-cells': + const: 2 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + soc { + #address-cells = <2>; + #size-cells = <2>; + + pwm: pwm@241c0000 { + compatible = "toshiba,visconti-pwm"; + reg = <0 0x241c0000 0 0x1000>; + pinctrl-names = "default"; + pinctrl-0 = <&pwm_mux>; + #pwm-cells = <2>; + }; + }; diff --git a/Documentation/devicetree/bindings/pwm/vt8500-pwm.txt b/Documentation/devicetree/bindings/pwm/vt8500-pwm.txt new file mode 100644 index 000000000..4fba93ce1 --- /dev/null +++ b/Documentation/devicetree/bindings/pwm/vt8500-pwm.txt @@ -0,0 +1,18 @@ +VIA/Wondermedia VT8500/WM8xxx series SoC PWM controller + +Required properties: +- compatible: should be "via,vt8500-pwm" +- reg: physical base address and length of the controller's registers +- #pwm-cells: should be 3. See pwm.yaml in this directory for a description of + the cells format. The only third cell flag supported by this binding is + PWM_POLARITY_INVERTED. +- clocks: phandle to the PWM source clock + +Example: + +pwm1: pwm@d8220000 { + #pwm-cells = <3>; + compatible = "via,vt8500-pwm"; + reg = <0xd8220000 0x1000>; + clocks = <&clkpwm>; +}; |