summaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree/bindings/serial
diff options
context:
space:
mode:
Diffstat (limited to '')
-rw-r--r--Documentation/devicetree/bindings/serial/8250.yaml259
-rw-r--r--Documentation/devicetree/bindings/serial/8250_omap.yaml120
-rw-r--r--Documentation/devicetree/bindings/serial/actions,owl-uart.txt16
-rw-r--r--Documentation/devicetree/bindings/serial/altera_jtaguart.txt5
-rw-r--r--Documentation/devicetree/bindings/serial/altera_uart.txt8
-rw-r--r--Documentation/devicetree/bindings/serial/amlogic,meson-uart.yaml82
-rw-r--r--Documentation/devicetree/bindings/serial/arc-uart.txt25
-rw-r--r--Documentation/devicetree/bindings/serial/arm,mps2-uart.txt19
-rw-r--r--Documentation/devicetree/bindings/serial/arm_sbsa_uart.txt10
-rw-r--r--Documentation/devicetree/bindings/serial/atmel,at91-usart.yaml190
-rw-r--r--Documentation/devicetree/bindings/serial/brcm,bcm2835-aux-uart.txt18
-rw-r--r--Documentation/devicetree/bindings/serial/brcm,bcm6345-uart.yaml47
-rw-r--r--Documentation/devicetree/bindings/serial/brcm,bcm7271-uart.yaml95
-rw-r--r--Documentation/devicetree/bindings/serial/cavium-uart.txt19
-rw-r--r--Documentation/devicetree/bindings/serial/cdns,uart.yaml66
-rw-r--r--Documentation/devicetree/bindings/serial/cirrus,clps711x-uart.txt31
-rw-r--r--Documentation/devicetree/bindings/serial/digicolor-usart.txt27
-rw-r--r--Documentation/devicetree/bindings/serial/fsl,s32-linflexuart.yaml48
-rw-r--r--Documentation/devicetree/bindings/serial/fsl-imx-uart.yaml112
-rw-r--r--Documentation/devicetree/bindings/serial/fsl-lpuart.yaml88
-rw-r--r--Documentation/devicetree/bindings/serial/fsl-mxs-auart.yaml91
-rw-r--r--Documentation/devicetree/bindings/serial/ingenic,uart.yaml99
-rw-r--r--Documentation/devicetree/bindings/serial/lantiq_asc.txt31
-rw-r--r--Documentation/devicetree/bindings/serial/litex,liteuart.yaml40
-rw-r--r--Documentation/devicetree/bindings/serial/maxim,max310x.txt48
-rw-r--r--Documentation/devicetree/bindings/serial/mediatek,uart.yaml121
-rw-r--r--Documentation/devicetree/bindings/serial/microchip,pic32-uart.txt29
-rw-r--r--Documentation/devicetree/bindings/serial/milbeaut-uart.txt21
-rw-r--r--Documentation/devicetree/bindings/serial/mrvl,pxa-ssp.txt64
-rw-r--r--Documentation/devicetree/bindings/serial/mvebu-uart.txt56
-rw-r--r--Documentation/devicetree/bindings/serial/nvidia,tegra194-tcu.yaml61
-rw-r--r--Documentation/devicetree/bindings/serial/nvidia,tegra20-hsuart.txt73
-rw-r--r--Documentation/devicetree/bindings/serial/nxp,lpc1850-uart.txt28
-rw-r--r--Documentation/devicetree/bindings/serial/nxp,sc16is7xx.txt118
-rw-r--r--Documentation/devicetree/bindings/serial/nxp-lpc32xx-hsuart.txt14
-rw-r--r--Documentation/devicetree/bindings/serial/pl011.yaml126
-rw-r--r--Documentation/devicetree/bindings/serial/qca,ar9330-uart.yaml50
-rw-r--r--Documentation/devicetree/bindings/serial/qcom,msm-uart.txt25
-rw-r--r--Documentation/devicetree/bindings/serial/qcom,msm-uartdm.yaml112
-rw-r--r--Documentation/devicetree/bindings/serial/qcom,serial-geni-qcom.yaml86
-rw-r--r--Documentation/devicetree/bindings/serial/rda,8810pl-uart.yaml46
-rw-r--r--Documentation/devicetree/bindings/serial/renesas,em-uart.yaml74
-rw-r--r--Documentation/devicetree/bindings/serial/renesas,hscif.yaml150
-rw-r--r--Documentation/devicetree/bindings/serial/renesas,sci.yaml109
-rw-r--r--Documentation/devicetree/bindings/serial/renesas,scif.yaml197
-rw-r--r--Documentation/devicetree/bindings/serial/renesas,scifa.yaml112
-rw-r--r--Documentation/devicetree/bindings/serial/renesas,scifb.yaml103
-rw-r--r--Documentation/devicetree/bindings/serial/rs485.txt1
-rw-r--r--Documentation/devicetree/bindings/serial/rs485.yaml56
-rw-r--r--Documentation/devicetree/bindings/serial/samsung_uart.yaml145
-rw-r--r--Documentation/devicetree/bindings/serial/serial.yaml153
-rw-r--r--Documentation/devicetree/bindings/serial/sifive-serial.yaml65
-rw-r--r--Documentation/devicetree/bindings/serial/snps-dw-apb-uart.yaml153
-rw-r--r--Documentation/devicetree/bindings/serial/socionext,uniphier-uart.yaml51
-rw-r--r--Documentation/devicetree/bindings/serial/sprd-uart.yaml75
-rw-r--r--Documentation/devicetree/bindings/serial/st,stm32-uart.yaml133
-rw-r--r--Documentation/devicetree/bindings/serial/st-asc.txt18
-rw-r--r--Documentation/devicetree/bindings/serial/sunplus,sp7021-uart.yaml56
-rw-r--r--Documentation/devicetree/bindings/serial/vt8500-uart.txt27
-rw-r--r--Documentation/devicetree/bindings/serial/xlnx,opb-uartlite.yaml89
60 files changed, 4391 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/serial/8250.yaml b/Documentation/devicetree/bindings/serial/8250.yaml
new file mode 100644
index 000000000..6258f5f59
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/8250.yaml
@@ -0,0 +1,259 @@
+# Copyright 2020 Lubomir Rintel <lkundrak@v3.sk>
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/serial/8250.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: UART (Universal Asynchronous Receiver/Transmitter) bindings
+
+maintainers:
+ - devicetree@vger.kernel.org
+
+allOf:
+ - $ref: serial.yaml#
+ - if:
+ anyOf:
+ - required:
+ - aspeed,lpc-io-reg
+ - required:
+ - aspeed,lpc-interrupts
+ - required:
+ - aspeed,sirq-polarity-sense
+ then:
+ properties:
+ compatible:
+ const: aspeed,ast2500-vuart
+ - if:
+ properties:
+ compatible:
+ const: mrvl,mmp-uart
+ then:
+ properties:
+ reg-shift:
+ const: 2
+ required:
+ - reg-shift
+ - if:
+ not:
+ properties:
+ compatible:
+ items:
+ - enum:
+ - ns8250
+ - ns16450
+ - ns16550
+ - ns16550a
+ then:
+ anyOf:
+ - required: [ clock-frequency ]
+ - required: [ clocks ]
+
+properties:
+ compatible:
+ oneOf:
+ - const: ns8250
+ - const: ns16450
+ - const: ns16550
+ - const: ns16550a
+ - const: ns16850
+ - const: aspeed,ast2400-vuart
+ - const: aspeed,ast2500-vuart
+ - const: intel,xscale-uart
+ - const: mrvl,pxa-uart
+ - const: nuvoton,wpcm450-uart
+ - const: nuvoton,npcm750-uart
+ - const: nuvoton,npcm845-uart
+ - const: nvidia,tegra20-uart
+ - const: nxp,lpc3220-uart
+ - items:
+ - enum:
+ - exar,xr16l2552
+ - exar,xr16l2551
+ - exar,xr16l2550
+ - const: ns8250
+ - items:
+ - enum:
+ - altr,16550-FIFO32
+ - altr,16550-FIFO64
+ - altr,16550-FIFO128
+ - fsl,16550-FIFO64
+ - fsl,ns16550
+ - andestech,uart16550
+ - nxp,lpc1850-uart
+ - opencores,uart16550-rtlsvn105
+ - ti,da830-uart
+ - const: ns16550a
+ - items:
+ - enum:
+ - ns16750
+ - cavium,octeon-3860-uart
+ - xlnx,xps-uart16550-2.00.b
+ - ralink,rt2880-uart
+ - enum:
+ - ns16550 # Deprecated, unless the FIFO really is broken
+ - ns16550a
+ - items:
+ - enum:
+ - ralink,mt7620a-uart
+ - ralink,rt3052-uart
+ - ralink,rt3883-uart
+ - const: ralink,rt2880-uart
+ - enum:
+ - ns16550 # Deprecated, unless the FIFO really is broken
+ - ns16550a
+ - items:
+ - enum:
+ - mediatek,mt7622-btif
+ - mediatek,mt7623-btif
+ - const: mediatek,mtk-btif
+ - items:
+ - const: mrvl,mmp-uart
+ - const: intel,xscale-uart
+ - items:
+ - enum:
+ - nvidia,tegra30-uart
+ - nvidia,tegra114-uart
+ - nvidia,tegra124-uart
+ - nvidia,tegra210-uart
+ - nvidia,tegra186-uart
+ - nvidia,tegra194-uart
+ - nvidia,tegra234-uart
+ - const: nvidia,tegra20-uart
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clock-frequency: true
+
+ clocks:
+ maxItems: 1
+
+ resets:
+ maxItems: 1
+
+ current-speed:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: The current active speed of the UART.
+
+ reg-offset:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ Offset to apply to the mapbase from the start of the registers.
+
+ reg-shift:
+ description: Quantity to shift the register offsets by.
+
+ reg-io-width:
+ description: |
+ The size (in bytes) of the IO accesses that should be performed on the
+ device. There are some systems that require 32-bit accesses to the
+ UART (e.g. TI davinci).
+
+ used-by-rtas:
+ type: boolean
+ description: |
+ Set to indicate that the port is in use by the OpenFirmware RTAS and
+ should not be registered.
+
+ no-loopback-test:
+ type: boolean
+ description: |
+ Set to indicate that the port does not implement loopback test mode.
+
+ fifo-size:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: The fifo size of the UART.
+
+ auto-flow-control:
+ type: boolean
+ description: |
+ One way to enable automatic flow control support. The driver is
+ allowed to detect support for the capability even without this
+ property.
+
+ tx-threshold:
+ description: |
+ Specify the TX FIFO low water indication for parts with programmable
+ TX FIFO thresholds.
+
+ overrun-throttle-ms:
+ description: |
+ How long to pause uart rx when input overrun is encountered.
+
+ rts-gpios: true
+ cts-gpios: true
+ dtr-gpios: true
+ dsr-gpios: true
+ rng-gpios: true
+ dcd-gpios: true
+
+ aspeed,sirq-polarity-sense:
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ description: |
+ Phandle to aspeed,ast2500-scu compatible syscon alongside register
+ offset and bit number to identify how the SIRQ polarity should be
+ configured. One possible data source is the LPC/eSPI mode bit. Only
+ applicable to aspeed,ast2500-vuart.
+ deprecated: true
+
+ aspeed,lpc-io-reg:
+ $ref: '/schemas/types.yaml#/definitions/uint32'
+ description: |
+ The VUART LPC address. Only applicable to aspeed,ast2500-vuart.
+
+ aspeed,lpc-interrupts:
+ $ref: "/schemas/types.yaml#/definitions/uint32-array"
+ minItems: 2
+ maxItems: 2
+ description: |
+ A 2-cell property describing the VUART SIRQ number and SIRQ
+ polarity (IRQ_TYPE_LEVEL_LOW or IRQ_TYPE_LEVEL_HIGH). Only
+ applicable to aspeed,ast2500-vuart.
+
+required:
+ - reg
+ - interrupts
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ serial@80230000 {
+ compatible = "ns8250";
+ reg = <0x80230000 0x100>;
+ interrupts = <10>;
+ reg-shift = <2>;
+ clock-frequency = <48000000>;
+ };
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ serial@49042000 {
+ compatible = "andestech,uart16550", "ns16550a";
+ reg = <0x49042000 0x400>;
+ interrupts = <80>;
+ clock-frequency = <48000000>;
+ cts-gpios = <&gpio3 5 GPIO_ACTIVE_LOW>;
+ rts-gpios = <&gpio3 6 GPIO_ACTIVE_LOW>;
+ dtr-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
+ dsr-gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
+ dcd-gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
+ rng-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+ };
+ - |
+ #include <dt-bindings/clock/aspeed-clock.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+ serial@1e787000 {
+ compatible = "aspeed,ast2500-vuart";
+ reg = <0x1e787000 0x40>;
+ reg-shift = <2>;
+ interrupts = <8>;
+ clocks = <&syscon ASPEED_CLK_APB>;
+ no-loopback-test;
+ aspeed,lpc-io-reg = <0x3f8>;
+ aspeed,lpc-interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/serial/8250_omap.yaml b/Documentation/devicetree/bindings/serial/8250_omap.yaml
new file mode 100644
index 000000000..7b34ec8fa
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/8250_omap.yaml
@@ -0,0 +1,120 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/serial/8250_omap.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Bindings for 8250 compliant UARTs on TI's OMAP2+ and K3 SoCs
+
+maintainers:
+ - Vignesh Raghavendra <vigneshr@ti.com>
+
+allOf:
+ - $ref: /schemas/serial/serial.yaml#
+ - $ref: /schemas/serial/rs485.yaml#
+
+properties:
+ compatible:
+ oneOf:
+ - enum:
+ - ti,am3352-uart
+ - ti,am4372-uart
+ - ti,am654-uart
+ - ti,dra742-uart
+ - ti,omap2-uart
+ - ti,omap3-uart
+ - ti,omap4-uart
+ - items:
+ - enum:
+ - ti,am64-uart
+ - ti,j721e-uart
+ - const: ti,am654-uart
+
+ ti,hwmods:
+ description:
+ Must be "uart<n>", n being the instance number (1-based)
+ This property is applicable only on legacy platforms mainly omap2/3
+ and ti81xx and should not be used on other platforms.
+ $ref: /schemas/types.yaml#/definitions/string
+ deprecated: true
+
+ dmas:
+ minItems: 1
+ maxItems: 2
+
+ dma-names:
+ items:
+ - const: tx
+ - const: rx
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ minItems: 1
+ maxItems: 2
+ description:
+ First entry is module IRQ required for normal IO operation.
+ Second entry is optional and corresponds to system wakeup IRQ
+ where supported.
+
+ clocks:
+ maxItems: 1
+
+ clock-names:
+ const: fclk
+
+ rts-gpios: true
+ cts-gpios: true
+ dtr-gpios: true
+ dsr-gpios: true
+ rng-gpios: true
+ dcd-gpios: true
+ rs485-rts-delay: true
+ rs485-rts-active-low: true
+ rs485-rx-during-tx: true
+ rs485-rts-active-high: true
+ linux,rs485-enabled-at-boot-time: true
+ rts-gpio: true
+ power-domains: true
+ clock-frequency: true
+ current-speed: true
+ overrun-throttle-ms: true
+
+required:
+ - compatible
+ - reg
+ - interrupts
+
+unevaluatedProperties: false
+
+if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - ti,omap2-uart
+ - ti,omap3-uart
+ - ti,omap4-uart
+
+then:
+ properties:
+ ti,hwmods:
+ items:
+ - pattern: "^uart([1-9])$"
+
+else:
+ properties:
+ ti,hwmods: false
+
+examples:
+ - |
+ serial@49042000 {
+ compatible = "ti,omap3-uart";
+ reg = <0x49042000 0x400>;
+ interrupts = <80>;
+ dmas = <&sdma 81 &sdma 82>;
+ dma-names = "tx", "rx";
+ ti,hwmods = "uart4";
+ clock-frequency = <48000000>;
+ };
diff --git a/Documentation/devicetree/bindings/serial/actions,owl-uart.txt b/Documentation/devicetree/bindings/serial/actions,owl-uart.txt
new file mode 100644
index 000000000..aa873eada
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/actions,owl-uart.txt
@@ -0,0 +1,16 @@
+Actions Semi Owl UART
+
+Required properties:
+- compatible : "actions,s500-uart", "actions,owl-uart" for S500
+ "actions,s900-uart", "actions,owl-uart" for S900
+- reg : Offset and length of the register set for the device.
+- interrupts : Should contain UART interrupt.
+
+
+Example:
+
+ uart3: serial@b0126000 {
+ compatible = "actions,s500-uart", "actions,owl-uart";
+ reg = <0xb0126000 0x1000>;
+ interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+ };
diff --git a/Documentation/devicetree/bindings/serial/altera_jtaguart.txt b/Documentation/devicetree/bindings/serial/altera_jtaguart.txt
new file mode 100644
index 000000000..55a901051
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/altera_jtaguart.txt
@@ -0,0 +1,5 @@
+Altera JTAG UART
+
+Required properties:
+- compatible : should be "ALTR,juart-1.0" <DEPRECATED>
+- compatible : should be "altr,juart-1.0"
diff --git a/Documentation/devicetree/bindings/serial/altera_uart.txt b/Documentation/devicetree/bindings/serial/altera_uart.txt
new file mode 100644
index 000000000..81bf7ffb1
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/altera_uart.txt
@@ -0,0 +1,8 @@
+Altera UART
+
+Required properties:
+- compatible : should be "ALTR,uart-1.0" <DEPRECATED>
+- compatible : should be "altr,uart-1.0"
+
+Optional properties:
+- clock-frequency : frequency of the clock input to the UART
diff --git a/Documentation/devicetree/bindings/serial/amlogic,meson-uart.yaml b/Documentation/devicetree/bindings/serial/amlogic,meson-uart.yaml
new file mode 100644
index 000000000..7822705ad
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/amlogic,meson-uart.yaml
@@ -0,0 +1,82 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2019 BayLibre, SAS
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/serial/amlogic,meson-uart.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Amlogic Meson SoC UART Serial Interface
+
+maintainers:
+ - Neil Armstrong <neil.armstrong@linaro.org>
+
+description: |
+ The Amlogic Meson SoC UART Serial Interface is present on a large range
+ of SoCs, and can be present either in the "Always-On" power domain or the
+ "Everything-Else" power domain.
+
+ The particularity of the "Always-On" Serial Interface is that the hardware
+ is active since power-on and does not need any clock gating and is usable
+ as very early serial console.
+
+properties:
+ compatible:
+ oneOf:
+ - description: Always-on power domain UART controller
+ items:
+ - enum:
+ - amlogic,meson6-uart
+ - amlogic,meson8-uart
+ - amlogic,meson8b-uart
+ - amlogic,meson-gx-uart
+ - amlogic,meson-s4-uart
+ - const: amlogic,meson-ao-uart
+ - description: Everything-Else power domain UART controller
+ enum:
+ - amlogic,meson6-uart
+ - amlogic,meson8-uart
+ - amlogic,meson8b-uart
+ - amlogic,meson-gx-uart
+ - amlogic,meson-s4-uart
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ items:
+ - description: external xtal clock identifier
+ - description: the bus core clock, either the clk81 clock or the gate clock
+ - description: the source of the baudrate generator, can be either the xtal or the pclk
+
+ clock-names:
+ items:
+ - const: xtal
+ - const: pclk
+ - const: baud
+
+ fifo-size:
+ description: The fifo size supported by the UART channel.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [64, 128]
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - clock-names
+
+additionalProperties: false
+
+examples:
+ - |
+ serial@84c0 {
+ compatible = "amlogic,meson-gx-uart";
+ reg = <0x84c0 0x14>;
+ interrupts = <26>;
+ clocks = <&xtal>, <&pclk>, <&xtal>;
+ clock-names = "xtal", "pclk", "baud";
+ };
diff --git a/Documentation/devicetree/bindings/serial/arc-uart.txt b/Documentation/devicetree/bindings/serial/arc-uart.txt
new file mode 100644
index 000000000..256cc150c
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/arc-uart.txt
@@ -0,0 +1,25 @@
+* Synopsys ARC UART : Non standard UART used in some of the ARC FPGA boards
+
+Required properties:
+- compatible : "snps,arc-uart"
+- reg : offset and length of the register set for the device.
+- interrupts : device interrupt
+- clock-frequency : the input clock frequency for the UART
+- current-speed : baud rate for UART
+
+e.g.
+
+arcuart0: serial@c0fc1000 {
+ compatible = "snps,arc-uart";
+ reg = <0xc0fc1000 0x100>;
+ interrupts = <5>;
+ clock-frequency = <80000000>;
+ current-speed = <115200>;
+};
+
+Note: Each port should have an alias correctly numbered in "aliases" node.
+
+e.g.
+aliases {
+ serial0 = &arcuart0;
+};
diff --git a/Documentation/devicetree/bindings/serial/arm,mps2-uart.txt b/Documentation/devicetree/bindings/serial/arm,mps2-uart.txt
new file mode 100644
index 000000000..128cc6aed
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/arm,mps2-uart.txt
@@ -0,0 +1,19 @@
+ARM MPS2 UART
+
+Required properties:
+- compatible : Should be "arm,mps2-uart"
+- reg : Address and length of the register set
+- interrupts : Reference to the UART RX, TX and overrun interrupts
+
+Required clocking property:
+- clocks : The input clock of the UART
+
+
+Examples:
+
+uart0: serial@40004000 {
+ compatible = "arm,mps2-uart";
+ reg = <0x40004000 0x1000>;
+ interrupts = <0 1 12>;
+ clocks = <&sysclk>;
+};
diff --git a/Documentation/devicetree/bindings/serial/arm_sbsa_uart.txt b/Documentation/devicetree/bindings/serial/arm_sbsa_uart.txt
new file mode 100644
index 000000000..4163e7eb7
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/arm_sbsa_uart.txt
@@ -0,0 +1,10 @@
+* ARM SBSA defined generic UART
+This UART uses a subset of the PL011 registers and consequently lives
+in the PL011 driver. It's baudrate and other communication parameters
+cannot be adjusted at runtime, so it lacks a clock specifier here.
+
+Required properties:
+- compatible: must be "arm,sbsa-uart"
+- reg: exactly one register range
+- interrupts: exactly one interrupt specifier
+- current-speed: the (fixed) baud rate set by the firmware
diff --git a/Documentation/devicetree/bindings/serial/atmel,at91-usart.yaml b/Documentation/devicetree/bindings/serial/atmel,at91-usart.yaml
new file mode 100644
index 000000000..30b2131b5
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/atmel,at91-usart.yaml
@@ -0,0 +1,190 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2022 Microchip Technology, Inc. and its subsidiaries
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/serial/atmel,at91-usart.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Atmel Universal Synchronous Asynchronous Receiver/Transmitter (USART)
+
+maintainers:
+ - Richard Genoud <richard.genoud@gmail.com>
+
+properties:
+ compatible:
+ oneOf:
+ - enum:
+ - atmel,at91rm9200-usart
+ - atmel,at91sam9260-usart
+ - microchip,sam9x60-usart
+ - items:
+ - const: atmel,at91rm9200-dbgu
+ - const: atmel,at91rm9200-usart
+ - items:
+ - const: atmel,at91sam9260-dbgu
+ - const: atmel,at91sam9260-usart
+ - items:
+ - const: microchip,sam9x60-dbgu
+ - const: microchip,sam9x60-usart
+ - const: atmel,at91sam9260-dbgu
+ - const: atmel,at91sam9260-usart
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clock-names:
+ minItems: 1
+ items:
+ - const: usart
+ - const: gclk
+
+ clocks:
+ minItems: 1
+ items:
+ - description: USART Peripheral Clock
+ - description: USART Generic Clock
+
+ dmas:
+ items:
+ - description: TX DMA Channel
+ - description: RX DMA Channel
+
+ dma-names:
+ items:
+ - const: tx
+ - const: rx
+
+ atmel,usart-mode:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ Must be either <AT91_USART_MODE_SPI> for SPI or
+ <AT91_USART_MODE_SERIAL> for USART (found in dt-bindings/mfd/at91-usart.h).
+ enum: [ 0, 1 ]
+
+ atmel,use-dma-rx:
+ type: boolean
+ description: use of PDC or DMA for receiving data
+
+ atmel,use-dma-tx:
+ type: boolean
+ description: use of PDC or DMA for transmitting data
+
+ atmel,fifo-size:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ Maximum number of data the RX and TX FIFOs can store for FIFO
+ capable USARTS.
+ enum: [ 16, 32 ]
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clock-names
+ - clocks
+ - atmel,usart-mode
+
+allOf:
+ - if:
+ properties:
+ atmel,usart-mode:
+ const: 1
+ then:
+ allOf:
+ - $ref: /schemas/spi/spi-controller.yaml#
+
+ properties:
+ atmel,use-dma-rx: false
+
+ atmel,use-dma-tx: false
+
+ atmel,fifo-size: false
+
+ "#size-cells":
+ const: 0
+
+ "#address-cells":
+ const: 1
+
+ required:
+ - "#size-cells"
+ - "#address-cells"
+
+ else:
+ allOf:
+ - $ref: /schemas/serial/serial.yaml#
+ - $ref: /schemas/serial/rs485.yaml#
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/mfd/at91-usart.h>
+ #include <dt-bindings/dma/at91.h>
+
+ /* use PDC */
+ usart0: serial@fff8c000 {
+ compatible = "atmel,at91sam9260-usart";
+ reg = <0xfff8c000 0x4000>;
+ atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+ interrupts = <7>;
+ clocks = <&usart0_clk>;
+ clock-names = "usart";
+ atmel,use-dma-rx;
+ atmel,use-dma-tx;
+ rts-gpios = <&pioD 15 GPIO_ACTIVE_LOW>;
+ cts-gpios = <&pioD 16 GPIO_ACTIVE_LOW>;
+ dtr-gpios = <&pioD 17 GPIO_ACTIVE_LOW>;
+ dsr-gpios = <&pioD 18 GPIO_ACTIVE_LOW>;
+ dcd-gpios = <&pioD 20 GPIO_ACTIVE_LOW>;
+ rng-gpios = <&pioD 19 GPIO_ACTIVE_LOW>;
+ };
+
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/mfd/at91-usart.h>
+ #include <dt-bindings/dma/at91.h>
+
+ /* use DMA */
+ usart1: serial@f001c000 {
+ compatible = "atmel,at91sam9260-usart";
+ reg = <0xf001c000 0x100>;
+ atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+ interrupts = <12 IRQ_TYPE_LEVEL_HIGH 5>;
+ clocks = <&usart0_clk>;
+ clock-names = "usart";
+ atmel,use-dma-rx;
+ atmel,use-dma-tx;
+ dmas = <&dma0 2 AT91_DMA_CFG_PER_ID(3)>,
+ <&dma0 2 (AT91_DMA_CFG_PER_ID(4) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
+ dma-names = "tx", "rx";
+ atmel,fifo-size = <32>;
+ };
+
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/mfd/at91-usart.h>
+ #include <dt-bindings/dma/at91.h>
+
+ /* SPI mode */
+ spi0: spi@f001c000 {
+ compatible = "atmel,at91sam9260-usart";
+ reg = <0xf001c000 0x100>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ atmel,usart-mode = <AT91_USART_MODE_SPI>;
+ interrupts = <12 IRQ_TYPE_LEVEL_HIGH 5>;
+ clocks = <&usart0_clk>;
+ clock-names = "usart";
+ dmas = <&dma0 2 AT91_DMA_CFG_PER_ID(3)>,
+ <&dma0 2 (AT91_DMA_CFG_PER_ID(4) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
+ dma-names = "tx", "rx";
+ cs-gpios = <&pioB 3 GPIO_ACTIVE_HIGH>;
+ };
diff --git a/Documentation/devicetree/bindings/serial/brcm,bcm2835-aux-uart.txt b/Documentation/devicetree/bindings/serial/brcm,bcm2835-aux-uart.txt
new file mode 100644
index 000000000..b5cc6297c
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/brcm,bcm2835-aux-uart.txt
@@ -0,0 +1,18 @@
+* BCM2835 AUXILIAR UART
+
+Required properties:
+
+- compatible: "brcm,bcm2835-aux-uart"
+- reg: The base address of the UART register bank.
+- interrupts: A single interrupt specifier.
+- clocks: Clock driving the hardware; used to figure out the baud rate
+ divisor.
+
+Example:
+
+ uart1: serial@7e215040 {
+ compatible = "brcm,bcm2835-aux-uart";
+ reg = <0x7e215040 0x40>;
+ interrupts = <1 29>;
+ clocks = <&aux BCM2835_AUX_CLOCK_UART>;
+ };
diff --git a/Documentation/devicetree/bindings/serial/brcm,bcm6345-uart.yaml b/Documentation/devicetree/bindings/serial/brcm,bcm6345-uart.yaml
new file mode 100644
index 000000000..a22285c43
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/brcm,bcm6345-uart.yaml
@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/serial/brcm,bcm6345-uart.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: BCM63xx UART
+
+maintainers:
+ - Rafał Miłecki <rafal@milecki.pl>
+
+allOf:
+ - $ref: serial.yaml#
+
+properties:
+ compatible:
+ const: brcm,bcm6345-uart
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ clock-names:
+ const: refclk
+
+unevaluatedProperties: false
+
+required:
+ - reg
+ - interrupts
+ - clocks
+
+examples:
+ - |
+ serial@14e00520 {
+ compatible = "brcm,bcm6345-uart";
+ reg = <0x14e00520 0x18>;
+ interrupt-parent = <&periph_intc>;
+ interrupts = <2>;
+ clocks = <&periph_clk>;
+ clock-names = "refclk";
+ };
diff --git a/Documentation/devicetree/bindings/serial/brcm,bcm7271-uart.yaml b/Documentation/devicetree/bindings/serial/brcm,bcm7271-uart.yaml
new file mode 100644
index 000000000..6d176588d
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/brcm,bcm7271-uart.yaml
@@ -0,0 +1,95 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/serial/brcm,bcm7271-uart.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom 8250 based serial port devicetree bindings
+
+maintainers:
+ - Al Cooper <alcooperx@gmail.com>
+
+allOf:
+ - $ref: serial.yaml#
+
+description: |+
+ The Broadcom UART is based on the basic 8250 UART but with
+ enhancements for more accurate high speed baud rates and support
+ for DMA.
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - brcm,bcm7271-uart
+ - brcm,bcm7278-uart
+
+ reg:
+ minItems: 1
+ maxItems: 5
+
+ reg-names:
+ description: The UART register block and optionally the DMA register blocks.
+ oneOf:
+ - items:
+ - const: uart
+ - items:
+ - const: uart
+ - const: dma_arb
+ - const: dma_rx
+ - const: dma_tx
+ - const: dma_intr2
+
+ clocks:
+ minItems: 1
+
+ clock-names:
+ const: sw_baud
+
+ interrupts:
+ minItems: 1
+ maxItems: 2
+
+ interrupt-names:
+ description: The UART interrupt and optionally the DMA interrupt.
+ minItems: 1
+ items:
+ - const: uart
+ - const: dma
+
+required:
+ - compatible
+ - reg
+ - reg-names
+ - clocks
+ - clock-names
+ - interrupts
+ - interrupt-names
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ serial@840d000 {
+ compatible = "brcm,bcm7271-uart";
+ reg = <0x840d000 0x20>;
+ reg-names = "uart";
+ interrupts = <0x0 0x62 0x4>;
+ interrupt-names = "uart";
+ clocks = <&scmi_clk 190>;
+ clock-names = "sw_baud";
+ };
+
+ serial@840e000 {
+ compatible = "brcm,bcm7271-uart";
+ reg = <0x840e000 0x20>,
+ <0x840e080 0x8>,
+ <0x840e100 0xa8>,
+ <0x840e200 0x4c>,
+ <0x840e300 0x30>;
+ reg-names = "uart", "dma_arb", "dma_rx", "dma_tx", "dma_intr2";
+ interrupts = <0x0 0x62 0x4>, <0x0 0x75 0x4>;
+ interrupt-names = "uart", "dma";
+ clocks = <&scmi_clk 190>;
+ clock-names = "sw_baud";
+ };
diff --git a/Documentation/devicetree/bindings/serial/cavium-uart.txt b/Documentation/devicetree/bindings/serial/cavium-uart.txt
new file mode 100644
index 000000000..87a6c375c
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/cavium-uart.txt
@@ -0,0 +1,19 @@
+* Universal Asynchronous Receiver/Transmitter (UART)
+
+- compatible: "cavium,octeon-3860-uart"
+
+ Compatibility with all cn3XXX, cn5XXX and cn6XXX SOCs.
+
+- reg: The base address of the UART register bank.
+
+- interrupts: A single interrupt specifier.
+
+- current-speed: Optional, the current bit rate in bits per second.
+
+Example:
+ uart1: serial@1180000000c00 {
+ compatible = "cavium,octeon-3860-uart","ns16550";
+ reg = <0x11800 0x00000c00 0x0 0x400>;
+ current-speed = <115200>;
+ interrupts = <0 35>;
+ };
diff --git a/Documentation/devicetree/bindings/serial/cdns,uart.yaml b/Documentation/devicetree/bindings/serial/cdns,uart.yaml
new file mode 100644
index 000000000..876b8cf1c
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/cdns,uart.yaml
@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/serial/cdns,uart.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cadence UART Controller
+
+maintainers:
+ - Michal Simek <michal.simek@xilinx.com>
+
+allOf:
+ - $ref: /schemas/serial.yaml#
+
+properties:
+ compatible:
+ oneOf:
+ - description: UART controller for Zynq-7xxx SoC
+ items:
+ - const: xlnx,xuartps
+ - const: cdns,uart-r1p8
+ - description: UART controller for Zynq Ultrascale+ MPSoC
+ items:
+ - const: xlnx,zynqmp-uart
+ - const: cdns,uart-r1p12
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ maxItems: 2
+
+ clock-names:
+ items:
+ - const: uart_clk
+ - const: pclk
+
+ cts-override:
+ description: |
+ Override the CTS modem status signal. This signal will
+ always be reported as active instead of being obtained
+ from the modem status register. Define this if your serial
+ port does not use this pin.
+ type: boolean
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - clock-names
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ uart0: serial@e0000000 {
+ compatible = "xlnx,xuartps", "cdns,uart-r1p8";
+ clocks = <&clkc 23>, <&clkc 40>;
+ clock-names = "uart_clk", "pclk";
+ reg = <0xE0000000 0x1000>;
+ interrupts = <0 27 4>;
+ };
diff --git a/Documentation/devicetree/bindings/serial/cirrus,clps711x-uart.txt b/Documentation/devicetree/bindings/serial/cirrus,clps711x-uart.txt
new file mode 100644
index 000000000..07013fa60
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/cirrus,clps711x-uart.txt
@@ -0,0 +1,31 @@
+* Cirrus Logic CLPS711X Universal Asynchronous Receiver/Transmitter (UART)
+
+Required properties:
+- compatible: Should be "cirrus,ep7209-uart".
+- reg: Address and length of the register set for the device.
+- interrupts: Should contain UART TX and RX interrupt.
+- clocks: Should contain UART core clock number.
+- syscon: Phandle to SYSCON node, which contain UART control bits.
+
+Optional properties:
+- {rts,cts,dtr,dsr,rng,dcd}-gpios: specify a GPIO for RTS/CTS/DTR/DSR/RI/DCD
+ line respectively.
+
+Note: Each UART port should have an alias correctly numbered
+in "aliases" node.
+
+Example:
+ aliases {
+ serial0 = &uart1;
+ };
+
+ uart1: uart@80000480 {
+ compatible = "cirrus,ep7312-uart","cirrus,ep7209-uart";
+ reg = <0x80000480 0x80>;
+ interrupts = <12 13>;
+ clocks = <&clks 11>;
+ syscon = <&syscon1>;
+ cts-gpios = <&sysgpio 0 GPIO_ACTIVE_LOW>;
+ dsr-gpios = <&sysgpio 1 GPIO_ACTIVE_LOW>;
+ dcd-gpios = <&sysgpio 2 GPIO_ACTIVE_LOW>;
+ };
diff --git a/Documentation/devicetree/bindings/serial/digicolor-usart.txt b/Documentation/devicetree/bindings/serial/digicolor-usart.txt
new file mode 100644
index 000000000..2d3ede668
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/digicolor-usart.txt
@@ -0,0 +1,27 @@
+Binding for Conexant Digicolor USART
+
+Note: this binding is only applicable for using the USART peripheral as
+UART. USART also support synchronous serial protocols like SPI and I2S. Use
+the binding that matches the wiring of your system.
+
+Required properties:
+- compatible : should be "cnxt,cx92755-usart".
+- reg: Should contain USART controller registers location and length.
+- interrupts: Should contain a single USART controller interrupt.
+- clocks: Must contain phandles to the USART clock
+ See ../clocks/clock-bindings.txt for details.
+
+Note: Each UART port should have an alias correctly numbered
+in "aliases" node.
+
+Example:
+ aliases {
+ serial0 = &uart0;
+ };
+
+ uart0: uart@f0000740 {
+ compatible = "cnxt,cx92755-usart";
+ reg = <0xf0000740 0x20>;
+ clocks = <&main_clk>;
+ interrupts = <44>;
+ };
diff --git a/Documentation/devicetree/bindings/serial/fsl,s32-linflexuart.yaml b/Documentation/devicetree/bindings/serial/fsl,s32-linflexuart.yaml
new file mode 100644
index 000000000..8b643bae3
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/fsl,s32-linflexuart.yaml
@@ -0,0 +1,48 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/serial/fsl,s32-linflexuart.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale LINFlexD UART
+
+description: |
+ The LINFlexD controller implements several LIN protocol versions, as well
+ as support for full-duplex UART communication through 8-bit and 9-bit
+ frames. See chapter 47 ("LINFlexD") in the reference manual
+ https://www.nxp.com/webapp/Download?colCode=S32V234RM.
+
+maintainers:
+ - Chester Lin <clin@suse.com>
+
+allOf:
+ - $ref: "serial.yaml"
+
+properties:
+ compatible:
+ oneOf:
+ - const: fsl,s32v234-linflexuart
+ - items:
+ - const: nxp,s32g2-linflexuart
+ - const: fsl,s32v234-linflexuart
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - interrupts
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ serial@40053000 {
+ compatible = "fsl,s32v234-linflexuart";
+ reg = <0x40053000 0x1000>;
+ interrupts = <0 59 4>;
+ };
diff --git a/Documentation/devicetree/bindings/serial/fsl-imx-uart.yaml b/Documentation/devicetree/bindings/serial/fsl-imx-uart.yaml
new file mode 100644
index 000000000..9d949296a
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/fsl-imx-uart.yaml
@@ -0,0 +1,112 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/serial/fsl-imx-uart.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX Universal Asynchronous Receiver/Transmitter (UART)
+
+maintainers:
+ - Fabio Estevam <festevam@gmail.com>
+
+allOf:
+ - $ref: "serial.yaml"
+ - $ref: "rs485.yaml"
+
+properties:
+ compatible:
+ oneOf:
+ - const: fsl,imx1-uart
+ - const: fsl,imx21-uart
+ - items:
+ - enum:
+ - fsl,imx25-uart
+ - fsl,imx27-uart
+ - fsl,imx31-uart
+ - fsl,imx35-uart
+ - fsl,imx50-uart
+ - fsl,imx51-uart
+ - fsl,imx53-uart
+ - fsl,imx6q-uart
+ - const: fsl,imx21-uart
+ - items:
+ - enum:
+ - fsl,imx6sl-uart
+ - fsl,imx6sll-uart
+ - fsl,imx6sx-uart
+ - const: fsl,imx6q-uart
+ - const: fsl,imx21-uart
+ - items:
+ - enum:
+ - fsl,imx6ul-uart
+ - fsl,imx7d-uart
+ - fsl,imx8mm-uart
+ - fsl,imx8mn-uart
+ - fsl,imx8mp-uart
+ - fsl,imx8mq-uart
+ - const: fsl,imx6q-uart
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ fsl,dte-mode:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description: |
+ Indicate the uart works in DTE mode. The uart works in DCE mode by default.
+
+ fsl,inverted-tx:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description: |
+ Indicate that the hardware attached to the peripheral inverts the signal
+ transmitted, and that the peripheral should invert its output using the
+ INVT registers.
+
+ fsl,inverted-rx:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description: |
+ Indicate that the hardware attached to the peripheral inverts the signal
+ received, and that the peripheral should invert its input using the
+ INVR registers.
+
+ fsl,dma-info:
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ minItems: 2
+ maxItems: 2
+ description: |
+ First cell contains the size of DMA buffer chunks, second cell contains
+ the amount of chunks used for the device. Multiplying both numbers is
+ the total size of memory used for receiving data.
+ When not being configured the system will use default settings, which
+ are sensible for most use cases. If you need low latency processing on
+ slow connections this needs to be configured appropriately.
+
+ uart-has-rtscts: true
+
+ rs485-rts-delay: true
+ rs485-rts-active-low: true
+ rs485-rx-during-tx: true
+ linux,rs485-enabled-at-boot-time: true
+
+required:
+ - compatible
+ - reg
+ - interrupts
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ aliases {
+ serial0 = &uart1;
+ };
+
+ uart1: serial@73fbc000 {
+ compatible = "fsl,imx51-uart", "fsl,imx21-uart";
+ reg = <0x73fbc000 0x4000>;
+ interrupts = <31>;
+ uart-has-rtscts;
+ fsl,dte-mode;
+ };
diff --git a/Documentation/devicetree/bindings/serial/fsl-lpuart.yaml b/Documentation/devicetree/bindings/serial/fsl-lpuart.yaml
new file mode 100644
index 000000000..30eaa62e1
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/fsl-lpuart.yaml
@@ -0,0 +1,88 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/serial/fsl-lpuart.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale low power universal asynchronous receiver/transmitter (lpuart)
+
+maintainers:
+ - Fugang Duan <fugang.duan@nxp.com>
+
+allOf:
+ - $ref: "rs485.yaml"
+
+properties:
+ compatible:
+ oneOf:
+ - enum:
+ - fsl,vf610-lpuart
+ - fsl,ls1021a-lpuart
+ - fsl,ls1028a-lpuart
+ - fsl,imx7ulp-lpuart
+ - fsl,imx8qxp-lpuart
+ - fsl,imxrt1050-lpuart
+ - items:
+ - enum:
+ - fsl,imx93-lpuart
+ - fsl,imx8ulp-lpuart
+ - const: fsl,imx7ulp-lpuart
+ - items:
+ - enum:
+ - fsl,imx8qm-lpuart
+ - fsl,imx8dxl-lpuart
+ - const: fsl,imx8qxp-lpuart
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ items:
+ - description: ipg clock
+ - description: baud clock
+ minItems: 1
+
+ clock-names:
+ items:
+ - const: ipg
+ - const: baud
+ minItems: 1
+
+ dmas:
+ items:
+ - description: DMA controller phandle and request line for RX
+ - description: DMA controller phandle and request line for TX
+
+ dma-names:
+ items:
+ - const: rx
+ - const: tx
+
+ rs485-rts-active-low: true
+ linux,rs485-enabled-at-boot-time: true
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - clock-names
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/vf610-clock.h>
+
+ serial@40027000 {
+ compatible = "fsl,vf610-lpuart";
+ reg = <0x40027000 0x1000>;
+ interrupts = <0 61 0x00>;
+ clocks = <&clks VF610_CLK_UART0>;
+ clock-names = "ipg";
+ dmas = <&edma0 0 2>, <&edma0 0 3>;
+ dma-names = "rx","tx";
+ };
diff --git a/Documentation/devicetree/bindings/serial/fsl-mxs-auart.yaml b/Documentation/devicetree/bindings/serial/fsl-mxs-auart.yaml
new file mode 100644
index 000000000..14c7594c8
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/fsl-mxs-auart.yaml
@@ -0,0 +1,91 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/serial/fsl-mxs-auart.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale MXS Application UART (AUART)
+
+maintainers:
+ - Fabio Estevam <festevam@gmail.com>
+
+allOf:
+ - $ref: "serial.yaml"
+
+properties:
+ compatible:
+ enum:
+ - fsl,imx23-auart
+ - fsl,imx28-auart
+ - alphascale,asm9260-auart
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ dmas:
+ items:
+ - description: DMA controller phandle and request line for RX
+ - description: DMA controller phandle and request line for TX
+
+ dma-names:
+ items:
+ - const: rx
+ - const: tx
+
+ clocks:
+ items:
+ - description: mod clock
+ - description: ahb clock
+ minItems: 1
+
+ clock-names:
+ items:
+ - const: mod
+ - const: ahb
+ minItems: 1
+
+ uart-has-rtscts: true
+ rts-gpios: true
+ cts-gpios: true
+ dtr-gpios: true
+ dsr-gpios: true
+ rng-gpios: true
+ dcd-gpios: true
+
+if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - alphascale,asm9260-auart
+then:
+ required:
+ - clocks
+ - clock-names
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - dmas
+ - dma-names
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ aliases {
+ serial0 = &auart0;
+ };
+
+ auart0: serial@8006a000 {
+ compatible = "fsl,imx28-auart";
+ reg = <0x8006a000 0x2000>;
+ interrupts = <112>;
+ dmas = <&dma_apbx 8>, <&dma_apbx 9>;
+ dma-names = "rx", "tx";
+ clocks = <&clks 45>;
+ };
diff --git a/Documentation/devicetree/bindings/serial/ingenic,uart.yaml b/Documentation/devicetree/bindings/serial/ingenic,uart.yaml
new file mode 100644
index 000000000..9ca7a18ec
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/ingenic,uart.yaml
@@ -0,0 +1,99 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/serial/ingenic,uart.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Ingenic SoCs UART controller devicetree bindings
+
+maintainers:
+ - Paul Cercueil <paul@crapouillou.net>
+
+allOf:
+ - $ref: serial.yaml#
+
+properties:
+ $nodename:
+ pattern: "^serial@[0-9a-f]+$"
+
+ compatible:
+ oneOf:
+ - enum:
+ - ingenic,jz4740-uart
+ - ingenic,jz4760-uart
+ - ingenic,jz4780-uart
+ - ingenic,x1000-uart
+ - items:
+ - enum:
+ - ingenic,jz4770-uart
+ - ingenic,jz4775-uart
+ - const: ingenic,jz4760-uart
+ - items:
+ - const: ingenic,jz4725b-uart
+ - const: ingenic,jz4740-uart
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ items:
+ - description: Baud clock
+ - description: UART module clock
+
+ clock-names:
+ items:
+ - const: baud
+ - const: module
+
+ dmas:
+ items:
+ - description: DMA controller phandle and request line for RX
+ - description: DMA controller phandle and request line for TX
+
+ dma-names:
+ items:
+ - const: rx
+ - const: tx
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - clock-names
+ - dmas
+ - dma-names
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/ingenic,jz4780-cgu.h>
+ #include <dt-bindings/dma/jz4780-dma.h>
+ #include <dt-bindings/gpio/gpio.h>
+ serial@10032000 {
+ compatible = "ingenic,jz4780-uart";
+ reg = <0x10032000 0x100>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <49>;
+
+ clocks = <&ext>, <&cgu JZ4780_CLK_UART2>;
+ clock-names = "baud", "module";
+
+ dmas = <&dma JZ4780_DMA_UART2_RX 0xffffffff>,
+ <&dma JZ4780_DMA_UART2_TX 0xffffffff>;
+ dma-names = "rx", "tx";
+
+ bluetooth {
+ compatible = "brcm,bcm4330-bt";
+ reset-gpios = <&gpf 8 GPIO_ACTIVE_HIGH>;
+ vbat-supply = <&wlan0_power>;
+ device-wakeup-gpios = <&gpf 5 GPIO_ACTIVE_HIGH>;
+ host-wakeup-gpios = <&gpf 6 GPIO_ACTIVE_HIGH>;
+ shutdown-gpios = <&gpf 4 GPIO_ACTIVE_LOW>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/serial/lantiq_asc.txt b/Documentation/devicetree/bindings/serial/lantiq_asc.txt
new file mode 100644
index 000000000..40e81a581
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/lantiq_asc.txt
@@ -0,0 +1,31 @@
+Lantiq SoC ASC serial controller
+
+Required properties:
+- compatible : Should be "lantiq,asc"
+- reg : Address and length of the register set for the device
+- interrupts: the 3 (tx rx err) interrupt numbers. The interrupt specifier
+ depends on the interrupt-parent interrupt controller.
+
+Optional properties:
+- clocks: Should contain frequency clock and gate clock
+- clock-names: Should be "freq" and "asc"
+
+Example:
+
+asc0: serial@16600000 {
+ compatible = "lantiq,asc";
+ reg = <0x16600000 0x100000>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SHARED 103 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SHARED 105 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SHARED 106 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cgu CLK_SSX4>, <&cgu GCLK_UART>;
+ clock-names = "freq", "asc";
+};
+
+asc1: serial@e100c00 {
+ compatible = "lantiq,asc";
+ reg = <0xE100C00 0x400>;
+ interrupt-parent = <&icu0>;
+ interrupts = <112 113 114>;
+};
diff --git a/Documentation/devicetree/bindings/serial/litex,liteuart.yaml b/Documentation/devicetree/bindings/serial/litex,liteuart.yaml
new file mode 100644
index 000000000..c4f1f489d
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/litex,liteuart.yaml
@@ -0,0 +1,40 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/serial/litex,liteuart.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LiteUART serial controller
+
+maintainers:
+ - Karol Gugala <kgugala@antmicro.com>
+ - Mateusz Holenko <mholenko@antmicro.com>
+
+description: |
+ LiteUART serial controller is a part of the LiteX FPGA SoC builder. It supports
+ multiple CPU architectures, currently including e.g. OpenRISC and RISC-V.
+
+properties:
+ compatible:
+ const: litex,liteuart
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ uart0: serial@e0001800 {
+ compatible = "litex,liteuart";
+ reg = <0xe0001800 0x100>;
+ interrupts = <2>;
+ };
diff --git a/Documentation/devicetree/bindings/serial/maxim,max310x.txt b/Documentation/devicetree/bindings/serial/maxim,max310x.txt
new file mode 100644
index 000000000..79e10a05a
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/maxim,max310x.txt
@@ -0,0 +1,48 @@
+* Maxim MAX310X advanced Universal Asynchronous Receiver-Transmitter (UART)
+
+Required properties:
+- compatible: Should be one of the following:
+ - "maxim,max3107" for Maxim MAX3107,
+ - "maxim,max3108" for Maxim MAX3108,
+ - "maxim,max3109" for Maxim MAX3109,
+ - "maxim,max14830" for Maxim MAX14830.
+- reg: SPI chip select number.
+- interrupts: Specifies the interrupt source of the parent interrupt
+ controller. The format of the interrupt specifier depends on the
+ parent interrupt controller.
+- clocks: phandle to the IC source clock.
+- clock-names: Should be "xtal" if clock is an external crystal or
+ "osc" if an external clock source is used.
+
+Optional properties:
+- gpio-controller: Marks the device node as a GPIO controller.
+- #gpio-cells: Should be two. The first cell is the GPIO number and
+ the second cell is used to specify the GPIO polarity:
+ 0 = active high,
+ 1 = active low.
+
+Example:
+
+/ {
+ clocks {
+ spi_uart_clk: osc_max14830 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <3686400>;
+ };
+
+ };
+};
+
+&spi0 {
+ max14830: max14830@0 {
+ compatible = "maxim,max14830";
+ reg = <0>;
+ clocks = <&spi_uart_clk>;
+ clock-names = "osc";
+ interrupt-parent = <&gpio3>;
+ interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+};
diff --git a/Documentation/devicetree/bindings/serial/mediatek,uart.yaml b/Documentation/devicetree/bindings/serial/mediatek,uart.yaml
new file mode 100644
index 000000000..fe098d98a
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/mediatek,uart.yaml
@@ -0,0 +1,121 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/serial/mediatek,uart.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek Universal Asynchronous Receiver/Transmitter (UART)
+
+maintainers:
+ - Matthias Brugger <matthias.bgg@gmail.com>
+
+allOf:
+ - $ref: serial.yaml#
+
+description: |
+ The MediaTek UART is based on the basic 8250 UART and compatible
+ with 16550A, with enhancements for high speed baud rates and
+ support for DMA.
+
+properties:
+ compatible:
+ oneOf:
+ - const: mediatek,mt6577-uart
+ - items:
+ - enum:
+ - mediatek,mt2701-uart
+ - mediatek,mt2712-uart
+ - mediatek,mt6580-uart
+ - mediatek,mt6582-uart
+ - mediatek,mt6589-uart
+ - mediatek,mt6755-uart
+ - mediatek,mt6765-uart
+ - mediatek,mt6779-uart
+ - mediatek,mt6795-uart
+ - mediatek,mt6797-uart
+ - mediatek,mt7622-uart
+ - mediatek,mt7623-uart
+ - mediatek,mt7629-uart
+ - mediatek,mt7986-uart
+ - mediatek,mt8127-uart
+ - mediatek,mt8135-uart
+ - mediatek,mt8173-uart
+ - mediatek,mt8183-uart
+ - mediatek,mt8186-uart
+ - mediatek,mt8188-uart
+ - mediatek,mt8192-uart
+ - mediatek,mt8195-uart
+ - mediatek,mt8516-uart
+ - const: mediatek,mt6577-uart
+
+ reg:
+ description: The base address of the UART register bank
+ maxItems: 1
+
+ clocks:
+ minItems: 1
+ items:
+ - description: The clock the baudrate is derived from
+ - description: The bus clock for register accesses
+
+ clock-names:
+ minItems: 1
+ items:
+ - const: baud
+ - const: bus
+
+ dmas:
+ items:
+ - description: phandle to TX DMA
+ - description: phandle to RX DMA
+
+ dma-names:
+ items:
+ - const: tx
+ - const: rx
+
+ interrupts:
+ minItems: 1
+ maxItems: 2
+
+ interrupt-names:
+ description:
+ The UART interrupt and optionally the RX in-band wakeup interrupt.
+ minItems: 1
+ items:
+ - const: uart
+ - const: wakeup
+
+ pinctrl-0: true
+ pinctrl-1: true
+
+ pinctrl-names:
+ minItems: 1
+ items:
+ - const: default
+ - const: sleep
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - interrupts
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ serial@11006000 {
+ compatible = "mediatek,mt6589-uart", "mediatek,mt6577-uart";
+ reg = <0x11006000 0x400>;
+ interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_SPI 52 IRQ_TYPE_EDGE_FALLING>;
+ interrupt-names = "uart", "wakeup";
+ clocks = <&uart_clk>, <&bus_clk>;
+ clock-names = "baud", "bus";
+ pinctrl-0 = <&uart_pin>;
+ pinctrl-1 = <&uart_pin_sleep>;
+ pinctrl-names = "default", "sleep";
+ };
diff --git a/Documentation/devicetree/bindings/serial/microchip,pic32-uart.txt b/Documentation/devicetree/bindings/serial/microchip,pic32-uart.txt
new file mode 100644
index 000000000..c8dd440e9
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/microchip,pic32-uart.txt
@@ -0,0 +1,29 @@
+* Microchip Universal Asynchronous Receiver Transmitter (UART)
+
+Required properties:
+- compatible: Should be "microchip,pic32mzda-uart"
+- reg: Should contain registers location and length
+- interrupts: Should contain interrupt
+- clocks: Phandle to the clock.
+ See: Documentation/devicetree/bindings/clock/clock-bindings.txt
+- pinctrl-names: A pinctrl state names "default" must be defined.
+- pinctrl-0: Phandle referencing pin configuration of the UART peripheral.
+ See: Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
+
+Optional properties:
+- cts-gpios: CTS pin for UART
+
+Example:
+ uart1: serial@1f822000 {
+ compatible = "microchip,pic32mzda-uart";
+ reg = <0x1f822000 0x50>;
+ interrupts = <112 IRQ_TYPE_LEVEL_HIGH>,
+ <113 IRQ_TYPE_LEVEL_HIGH>,
+ <114 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rootclk PB2CLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1
+ &pinctrl_uart1_cts
+ &pinctrl_uart1_rts>;
+ cts-gpios = <&gpio1 15 0>;
+ };
diff --git a/Documentation/devicetree/bindings/serial/milbeaut-uart.txt b/Documentation/devicetree/bindings/serial/milbeaut-uart.txt
new file mode 100644
index 000000000..3d2fb1a7b
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/milbeaut-uart.txt
@@ -0,0 +1,21 @@
+Socionext Milbeaut UART controller
+
+Required properties:
+- compatible: should be "socionext,milbeaut-usio-uart".
+- reg: offset and length of the register set for the device.
+- interrupts: two interrupts specifier.
+- interrupt-names: should be "rx", "tx".
+- clocks: phandle to the input clock.
+
+Optional properties:
+- auto-flow-control: flow control enable.
+
+Example:
+ usio1: usio_uart@1e700010 {
+ compatible = "socionext,milbeaut-usio-uart";
+ reg = <0x1e700010 0x10>;
+ interrupts = <0 141 0x4>, <0 149 0x4>;
+ interrupt-names = "rx", "tx";
+ clocks = <&clk 2>;
+ auto-flow-control;
+ };
diff --git a/Documentation/devicetree/bindings/serial/mrvl,pxa-ssp.txt b/Documentation/devicetree/bindings/serial/mrvl,pxa-ssp.txt
new file mode 100644
index 000000000..d10cc06c0
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/mrvl,pxa-ssp.txt
@@ -0,0 +1,64 @@
+Device tree bindings for Marvell PXA SSP ports
+
+Required properties:
+
+ - compatible: Must be one of
+ mrvl,pxa25x-ssp
+ mvrl,pxa25x-nssp
+ mrvl,pxa27x-ssp
+ mrvl,pxa3xx-ssp
+ mvrl,pxa168-ssp
+ mrvl,pxa910-ssp
+ mrvl,ce4100-ssp
+
+ - reg: The memory base
+ - dmas: Two dma phandles, one for rx, one for tx
+ - dma-names: Must be "rx", "tx"
+
+
+Example for PXA3xx:
+
+ ssp0: ssp@41000000 {
+ compatible = "mrvl,pxa3xx-ssp";
+ reg = <0x41000000 0x40>;
+ ssp-id = <1>;
+ interrupts = <24>;
+ clock-names = "pxa27x-ssp.0";
+ dmas = <&dma 13
+ &dma 14>;
+ dma-names = "rx", "tx";
+ };
+
+ ssp1: ssp@41700000 {
+ compatible = "mrvl,pxa3xx-ssp";
+ reg = <0x41700000 0x40>;
+ ssp-id = <2>;
+ interrupts = <16>;
+ clock-names = "pxa27x-ssp.1";
+ dmas = <&dma 15
+ &dma 16>;
+ dma-names = "rx", "tx";
+ };
+
+ ssp2: ssp@41900000 {
+ compatibl3 = "mrvl,pxa3xx-ssp";
+ reg = <0x41900000 0x40>;
+ ssp-id = <3>;
+ interrupts = <0>;
+ clock-names = "pxa27x-ssp.2";
+ dmas = <&dma 66
+ &dma 67>;
+ dma-names = "rx", "tx";
+ };
+
+ ssp3: ssp@41a00000 {
+ compatible = "mrvl,pxa3xx-ssp";
+ reg = <0x41a00000 0x40>;
+ ssp-id = <4>;
+ interrupts = <13>;
+ clock-names = "pxa27x-ssp.3";
+ dmas = <&dma 2
+ &dma 3>;
+ dma-names = "rx", "tx";
+ };
+
diff --git a/Documentation/devicetree/bindings/serial/mvebu-uart.txt b/Documentation/devicetree/bindings/serial/mvebu-uart.txt
new file mode 100644
index 000000000..a062bbca5
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/mvebu-uart.txt
@@ -0,0 +1,56 @@
+* Marvell UART : Non standard UART used in some of Marvell EBU SoCs
+ e.g., Armada-3700.
+
+Required properties:
+- compatible:
+ - "marvell,armada-3700-uart" for the standard variant of the UART
+ (32 bytes FIFO, no DMA, level interrupts, 8-bit access to the
+ FIFO), called also UART1.
+ - "marvell,armada-3700-uart-ext" for the extended variant of the
+ UART (128 bytes FIFO, DMA, front interrupts, 8-bit or 32-bit
+ accesses to the FIFO), called also UART2.
+- reg: offset and length of the register set for the device.
+- clocks: UART reference clock used to derive the baudrate. If no clock
+ is provided (possible only with the "marvell,armada-3700-uart"
+ compatible string for backward compatibility), it will only work
+ if the baudrate was initialized by the bootloader and no baudrate
+ change will then be possible. When provided it should be UART1-clk
+ for standard variant of UART and UART2-clk for extended variant
+ of UART. TBG clock (with UART TBG divisors d1=d2=1) or xtal clock
+ should not be used and are supported only for backward compatibility.
+- interrupts:
+ - Must contain three elements for the standard variant of the IP
+ (marvell,armada-3700-uart): "uart-sum", "uart-tx" and "uart-rx",
+ respectively the UART sum interrupt, the UART TX interrupt and
+ UART RX interrupt. A corresponding interrupt-names property must
+ be defined.
+ - Must contain two elements for the extended variant of the IP
+ (marvell,armada-3700-uart-ext): "uart-tx" and "uart-rx",
+ respectively the UART TX interrupt and the UART RX interrupt. A
+ corresponding interrupt-names property must be defined.
+ - For backward compatibility reasons, a single element interrupts
+ property is also supported for the standard variant of the IP,
+ containing only the UART sum interrupt. This form is deprecated
+ and should no longer be used.
+
+Example:
+ uart0: serial@12000 {
+ compatible = "marvell,armada-3700-uart";
+ reg = <0x12000 0x18>;
+ clocks = <&uartclk 0>;
+ interrupts =
+ <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "uart-sum", "uart-tx", "uart-rx";
+ };
+
+ uart1: serial@12200 {
+ compatible = "marvell,armada-3700-uart-ext";
+ reg = <0x12200 0x30>;
+ clocks = <&uartclk 1>;
+ interrupts =
+ <GIC_SPI 30 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 31 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "uart-tx", "uart-rx";
+ };
diff --git a/Documentation/devicetree/bindings/serial/nvidia,tegra194-tcu.yaml b/Documentation/devicetree/bindings/serial/nvidia,tegra194-tcu.yaml
new file mode 100644
index 000000000..e2d111b3e
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/nvidia,tegra194-tcu.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/serial/nvidia,tegra194-tcu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NVIDIA Tegra Combined UART (TCU)
+
+maintainers:
+ - Thierry Reding <thierry.reding@gmail.com>
+ - Jonathan Hunter <jonathanh@nvidia.com>
+
+description:
+ The TCU is a system for sharing a hardware UART instance among multiple
+ systems within the Tegra SoC. It is implemented through a mailbox-
+ based protocol where each "virtual UART" has a pair of mailboxes, one
+ for transmitting and one for receiving, that is used to communicate
+ with the hardware implementing the TCU.
+
+properties:
+ $nodename:
+ pattern: "^serial(@.*)?$"
+
+ compatible:
+ oneOf:
+ - const: nvidia,tegra194-tcu
+ - items:
+ - enum:
+ - nvidia,tegra234-tcu
+ - const: nvidia,tegra194-tcu
+
+ mbox-names:
+ items:
+ - const: rx
+ - const: tx
+
+ mboxes:
+ description: |
+ List of phandles to mailbox channels used for receiving and
+ transmitting data from and to the hardware UART.
+ items:
+ - description: mailbox for receiving data from hardware UART
+ - description: mailbox for transmitting data to hardware UART
+
+required:
+ - compatible
+ - mbox-names
+ - mboxes
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/mailbox/tegra186-hsp.h>
+
+ tcu: serial {
+ compatible = "nvidia,tegra194-tcu";
+ mboxes = <&hsp_top0 TEGRA_HSP_MBOX_TYPE_SM 0>,
+ <&hsp_aon TEGRA_HSP_MBOX_TYPE_SM 1>;
+ mbox-names = "rx", "tx";
+ };
diff --git a/Documentation/devicetree/bindings/serial/nvidia,tegra20-hsuart.txt b/Documentation/devicetree/bindings/serial/nvidia,tegra20-hsuart.txt
new file mode 100644
index 000000000..f70930403
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/nvidia,tegra20-hsuart.txt
@@ -0,0 +1,73 @@
+NVIDIA Tegra20/Tegra30 high speed (DMA based) UART controller driver.
+
+Required properties:
+- compatible : should be,
+ "nvidia,tegra20-hsuart" for Tegra20,
+ "nvidia,tegra30-hsuart" for Tegra30,
+ "nvidia,tegra186-hsuart" for Tegra186,
+ "nvidia,tegra194-hsuart" for Tegra194.
+
+- reg: Should contain UART controller registers location and length.
+- interrupts: Should contain UART controller interrupts.
+- clocks: Must contain one entry, for the module clock.
+ See ../clocks/clock-bindings.txt for details.
+- resets : Must contain an entry for each entry in reset-names.
+ See ../reset/reset.txt for details.
+- reset-names : Must include the following entries:
+ - serial
+- dmas : Must contain an entry for each entry in dma-names.
+ See ../dma/dma.txt for details.
+- dma-names : Must include the following entries:
+ - rx
+ - tx
+
+Optional properties:
+- nvidia,enable-modem-interrupt: Enable modem interrupts. Should be enable
+ only if all 8 lines of UART controller are pinmuxed.
+- nvidia,adjust-baud-rates: List of entries providing percentage of baud rate
+ adjustment within a range.
+ Each entry contains sets of 3 values. Range low/high and adjusted rate.
+ <range_low range_high adjusted_rate>
+ When baud rate set on controller falls within the range mentioned in this
+ field, baud rate will be adjusted by percentage mentioned here.
+ Ex: <9600 115200 200>
+ Increase baud rate by 2% when set baud rate falls within range 9600 to 115200
+
+Baud Rate tolerance:
+ Standard UART devices are expected to have tolerance for baud rate error by
+ -4 to +4 %. All Tegra devices till Tegra210 had this support. However,
+ Tegra186 chip has a known hardware issue. UART Rx baud rate tolerance level
+ is 0% to +4% in 1-stop config. Otherwise, the received data will have
+ corruption/invalid framing errors. Parker errata suggests adjusting baud
+ rate to be higher than the deviations observed in Tx.
+
+ Tx deviation of connected device can be captured over scope (or noted from
+ its spec) for valid range and Tegra baud rate has to be set above actual
+ Tx baud rate observed. To do this we use nvidia,adjust-baud-rates
+
+ As an example, consider there is deviation observed in Tx for baud rates as
+ listed below.
+ 0 to 9600 has 1% deviation
+ 9600 to 115200 2% deviation
+ This slight deviation is expcted and Tegra UART is expected to handle it. Due
+ to the issue stated above, baud rate on Tegra UART should be set equal to or
+ above deviation observed for avoiding frame errors.
+ Property should be set like this
+ nvidia,adjust-baud-rates = <0 9600 100>,
+ <9600 115200 200>;
+
+Example:
+
+serial@70006000 {
+ compatible = "nvidia,tegra30-hsuart", "nvidia,tegra20-hsuart";
+ reg = <0x70006000 0x40>;
+ reg-shift = <2>;
+ interrupts = <0 36 0x04>;
+ nvidia,enable-modem-interrupt;
+ clocks = <&tegra_car 6>;
+ resets = <&tegra_car 6>;
+ reset-names = "serial";
+ dmas = <&apbdma 8>, <&apbdma 8>;
+ dma-names = "rx", "tx";
+ nvidia,adjust-baud-rates = <1000000 4000000 136>; /* 1.36% shift */
+};
diff --git a/Documentation/devicetree/bindings/serial/nxp,lpc1850-uart.txt b/Documentation/devicetree/bindings/serial/nxp,lpc1850-uart.txt
new file mode 100644
index 000000000..04e23e63e
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/nxp,lpc1850-uart.txt
@@ -0,0 +1,28 @@
+* NXP LPC1850 UART
+
+Required properties:
+- compatible : "nxp,lpc1850-uart", "ns16550a".
+- reg : offset and length of the register set for the device.
+- interrupts : should contain uart interrupt.
+- clocks : phandle to the input clocks.
+- clock-names : required elements: "uartclk", "reg".
+
+Optional properties:
+- dmas : Two or more DMA channel specifiers following the
+ convention outlined in bindings/dma/dma.txt
+- dma-names : Names for the dma channels, if present. There must
+ be at least one channel named "tx" for transmit
+ and named "rx" for receive.
+
+Since it's also possible to also use the of_serial.c driver all
+parameters from 8250.txt also apply but are optional.
+
+Example:
+uart0: serial@40081000 {
+ compatible = "nxp,lpc1850-uart", "ns16550a";
+ reg = <0x40081000 0x1000>;
+ reg-shift = <2>;
+ interrupts = <24>;
+ clocks = <&ccu2 CLK_APB0_UART0>, <&ccu1 CLK_CPU_UART0>;
+ clock-names = "uartclk", "reg";
+};
diff --git a/Documentation/devicetree/bindings/serial/nxp,sc16is7xx.txt b/Documentation/devicetree/bindings/serial/nxp,sc16is7xx.txt
new file mode 100644
index 000000000..1a7e4bff0
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/nxp,sc16is7xx.txt
@@ -0,0 +1,118 @@
+* NXP SC16IS7xx advanced Universal Asynchronous Receiver-Transmitter (UART)
+* i2c as bus
+
+Required properties:
+- compatible: Should be one of the following:
+ - "nxp,sc16is740" for NXP SC16IS740,
+ - "nxp,sc16is741" for NXP SC16IS741,
+ - "nxp,sc16is750" for NXP SC16IS750,
+ - "nxp,sc16is752" for NXP SC16IS752,
+ - "nxp,sc16is760" for NXP SC16IS760,
+ - "nxp,sc16is762" for NXP SC16IS762.
+- reg: I2C address of the SC16IS7xx device.
+- interrupts: Should contain the UART interrupt
+- clocks: Reference to the IC source clock.
+ OR (when there is no clock provider visible to the platform)
+- clock-frequency: The source clock frequency for the IC.
+
+Optional properties:
+- gpio-controller: Marks the device node as a GPIO controller.
+- #gpio-cells: Should be two. The first cell is the GPIO number and
+ the second cell is used to specify the GPIO polarity:
+ 0 = active high,
+ 1 = active low.
+- irda-mode-ports: An array that lists the indices of the port that
+ should operate in IrDA mode.
+- nxp,modem-control-line-ports: An array that lists the indices of the port that
+ should have shared GPIO lines configured as
+ modem control lines.
+
+Example:
+ sc16is750: sc16is750@51 {
+ compatible = "nxp,sc16is750";
+ reg = <0x51>;
+ clocks = <&clk20m>;
+ interrupt-parent = <&gpio3>;
+ interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ sc16is752: sc16is752@53 {
+ compatible = "nxp,sc16is752";
+ reg = <0x53>;
+ clocks = <&clk20m>;
+ interrupt-parent = <&gpio3>;
+ interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
+ nxp,modem-control-line-ports = <1>; /* Port 1 as modem control lines */
+ gpio-controller; /* Port 0 as GPIOs */
+ #gpio-cells = <2>;
+ };
+
+ sc16is752: sc16is752@54 {
+ compatible = "nxp,sc16is752";
+ reg = <0x54>;
+ clocks = <&clk20m>;
+ interrupt-parent = <&gpio3>;
+ interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
+ nxp,modem-control-line-ports = <0 1>; /* Ports 0 and 1 as modem control lines */
+ };
+
+* spi as bus
+
+Required properties:
+- compatible: Should be one of the following:
+ - "nxp,sc16is740" for NXP SC16IS740,
+ - "nxp,sc16is741" for NXP SC16IS741,
+ - "nxp,sc16is750" for NXP SC16IS750,
+ - "nxp,sc16is752" for NXP SC16IS752,
+ - "nxp,sc16is760" for NXP SC16IS760,
+ - "nxp,sc16is762" for NXP SC16IS762.
+- reg: SPI chip select number.
+- interrupts: Specifies the interrupt source of the parent interrupt
+ controller. The format of the interrupt specifier depends on the
+ parent interrupt controller.
+- clocks: phandle to the IC source clock.
+
+Optional properties:
+- gpio-controller: Marks the device node as a GPIO controller.
+- #gpio-cells: Should be two. The first cell is the GPIO number and
+ the second cell is used to specify the GPIO polarity:
+ 0 = active high,
+ 1 = active low.
+- irda-mode-ports: An array that lists the indices of the port that
+ should operate in IrDA mode.
+- nxp,modem-control-line-ports: An array that lists the indices of the port that
+ should have shared GPIO lines configured as
+ modem control lines.
+
+Example:
+ sc16is750: sc16is750@0 {
+ compatible = "nxp,sc16is750";
+ reg = <0>;
+ clocks = <&clk20m>;
+ interrupt-parent = <&gpio3>;
+ interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ sc16is752: sc16is752@1 {
+ compatible = "nxp,sc16is752";
+ reg = <1>;
+ clocks = <&clk20m>;
+ interrupt-parent = <&gpio3>;
+ interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
+ nxp,modem-control-line-ports = <1>; /* Port 1 as modem control lines */
+ gpio-controller; /* Port 0 as GPIOs */
+ #gpio-cells = <2>;
+ };
+
+ sc16is752: sc16is752@2 {
+ compatible = "nxp,sc16is752";
+ reg = <2>;
+ clocks = <&clk20m>;
+ interrupt-parent = <&gpio3>;
+ interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
+ nxp,modem-control-line-ports = <0 1>; /* Ports 0 and 1 as modem control lines */
+ };
diff --git a/Documentation/devicetree/bindings/serial/nxp-lpc32xx-hsuart.txt b/Documentation/devicetree/bindings/serial/nxp-lpc32xx-hsuart.txt
new file mode 100644
index 000000000..0d439dfc1
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/nxp-lpc32xx-hsuart.txt
@@ -0,0 +1,14 @@
+* NXP LPC32xx SoC High Speed UART
+
+Required properties:
+- compatible: Should be "nxp,lpc3220-hsuart"
+- reg: Should contain registers location and length
+- interrupts: Should contain interrupt
+
+Example:
+
+ uart1: serial@40014000 {
+ compatible = "nxp,lpc3220-hsuart";
+ reg = <0x40014000 0x1000>;
+ interrupts = <26 0>;
+ };
diff --git a/Documentation/devicetree/bindings/serial/pl011.yaml b/Documentation/devicetree/bindings/serial/pl011.yaml
new file mode 100644
index 000000000..80af72859
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/pl011.yaml
@@ -0,0 +1,126 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/serial/pl011.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM AMBA Primecell PL011 serial UART
+
+maintainers:
+ - Rob Herring <robh@kernel.org>
+
+allOf:
+ - $ref: serial.yaml#
+
+# Need a custom select here or 'arm,primecell' will match on lots of nodes
+select:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - arm,pl011
+ required:
+ - compatible
+
+properties:
+ compatible:
+ items:
+ - const: arm,pl011
+ - const: arm,primecell
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ pinctrl-0: true
+ pinctrl-1: true
+
+ pinctrl-names:
+ description:
+ When present, must have one state named "default",
+ and may contain a second name named "sleep". The former
+ state sets up pins for ordinary operation whereas
+ the latter state will put the associated pins to sleep
+ when the UART is unused
+ minItems: 1
+ items:
+ - const: default
+ - const: sleep
+
+ clocks:
+ description:
+ When present, the first clock listed must correspond to
+ the clock named UARTCLK on the IP block, i.e. the clock
+ to the external serial line, whereas the second clock
+ must correspond to the PCLK clocking the internal logic
+ of the block. Just listing one clock (the first one) is
+ deprecated.
+ maxItems: 2
+
+ clock-names:
+ items:
+ - const: uartclk
+ - const: apb_pclk
+
+ dmas:
+ minItems: 1
+ maxItems: 2
+
+ dma-names:
+ minItems: 1
+ items:
+ - const: rx
+ - const: tx
+
+ auto-poll:
+ description:
+ Enables polling when using RX DMA.
+ type: boolean
+
+ poll-rate-ms:
+ description:
+ Rate at which poll occurs when auto-poll is set.
+ default 100ms.
+ default: 100
+
+ poll-timeout-ms:
+ description:
+ Poll timeout when auto-poll is set, default
+ 3000ms.
+ default: 3000
+
+ resets:
+ maxItems: 1
+
+ reg-io-width:
+ description:
+ The size (in bytes) of the IO accesses that should be performed
+ on the device.
+ enum: [1, 4]
+
+required:
+ - compatible
+ - reg
+ - interrupts
+
+dependencies:
+ poll-rate-ms: [ auto-poll ]
+ poll-timeout-ms: [ auto-poll ]
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ serial@80120000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x80120000 0x1000>;
+ interrupts = <0 11 4>;
+ dmas = <&dma 13 0 0x2>, <&dma 13 0 0x0>;
+ dma-names = "rx", "tx";
+ clocks = <&foo_clk>, <&bar_clk>;
+ clock-names = "uartclk", "apb_pclk";
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/serial/qca,ar9330-uart.yaml b/Documentation/devicetree/bindings/serial/qca,ar9330-uart.yaml
new file mode 100644
index 000000000..a644e5af1
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/qca,ar9330-uart.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/serial/qca,ar9330-uart.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Atheros AR9330 High-Speed UART
+
+maintainers:
+ - Oleksij Rempel <o.rempel@pengutronix.de>
+
+allOf:
+ - $ref: serial.yaml#
+
+properties:
+ compatible:
+ const: qca,ar9330-uart
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ clock-names:
+ const: uart
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - clock-names
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ serial@18020000 {
+ compatible = "qca,ar9330-uart";
+ reg = <0x18020000 0x14>;
+ clocks = <&ref>;
+ clock-names = "uart";
+ interrupt-parent = <&intc>;
+ interrupts = <3>;
+ };
+...
diff --git a/Documentation/devicetree/bindings/serial/qcom,msm-uart.txt b/Documentation/devicetree/bindings/serial/qcom,msm-uart.txt
new file mode 100644
index 000000000..ce8c90161
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/qcom,msm-uart.txt
@@ -0,0 +1,25 @@
+* MSM Serial UART
+
+The MSM serial UART hardware is designed for low-speed use cases where a
+dma-engine isn't needed. From a software perspective it's mostly compatible
+with the MSM serial UARTDM except that it only supports reading and writing one
+character at a time.
+
+Required properties:
+- compatible: Should contain "qcom,msm-uart"
+- reg: Should contain UART register location and length.
+- interrupts: Should contain UART interrupt.
+- clocks: Should contain the core clock.
+- clock-names: Should be "core".
+
+Example:
+
+A uart device at 0xa9c00000 with interrupt 11.
+
+serial@a9c00000 {
+ compatible = "qcom,msm-uart";
+ reg = <0xa9c00000 0x1000>;
+ interrupts = <11>;
+ clocks = <&uart_cxc>;
+ clock-names = "core";
+};
diff --git a/Documentation/devicetree/bindings/serial/qcom,msm-uartdm.yaml b/Documentation/devicetree/bindings/serial/qcom,msm-uartdm.yaml
new file mode 100644
index 000000000..484b9a51f
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/qcom,msm-uartdm.yaml
@@ -0,0 +1,112 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/serial/qcom,msm-uartdm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm MSM Serial UARTDM
+
+maintainers:
+ - Andy Gross <agross@kernel.org>
+ - Bjorn Andersson <bjorn.andersson@linaro.org>
+ - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+
+description: |
+ The MSM serial UARTDM hardware is designed for high-speed use cases where the
+ transmit and/or receive channels can be offloaded to a dma-engine. From a
+ software perspective it's mostly compatible with the MSM serial UART except
+ that it supports reading and writing multiple characters at a time.
+
+ Note:: Aliases may be defined to ensure the correct ordering of the UARTs.
+ The alias serialN will result in the UART being assigned port N. If any
+ serialN alias exists, then an alias must exist for each enabled UART. The
+ serialN aliases should be in a .dts file instead of in a .dtsi file.
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - qcom,msm-uartdm-v1.1
+ - qcom,msm-uartdm-v1.2
+ - qcom,msm-uartdm-v1.3
+ - qcom,msm-uartdm-v1.4
+ - const: qcom,msm-uartdm
+
+ clocks:
+ maxItems: 2
+
+ clock-names:
+ items:
+ - const: core
+ - const: iface
+
+ dmas:
+ maxItems: 2
+
+ dma-names:
+ items:
+ - const: tx
+ - const: rx
+
+ interrupts:
+ maxItems: 1
+
+ qcom,rx-crci:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ Identificator for Client Rate Control Interface to be used with RX DMA
+ channel. Required when using DMA for reception with UARTDM v1.3 and
+ below.
+
+ qcom,tx-crci:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ Identificator for Client Rate Control Interface to be used with TX DMA
+ channel. Required when using DMA for transmission with UARTDM v1.3 and
+ below.
+
+ reg:
+ minItems: 1
+ items:
+ - description: Main control registers
+ - description: An optional second register location shall specify the GSBI control region.
+
+required:
+ - compatible
+ - clock-names
+ - clocks
+ - interrupts
+ - reg
+
+unevaluatedProperties: false
+
+allOf:
+ - $ref: /schemas/serial/serial.yaml#
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: qcom,msm-uartdm-v1.3
+ then:
+ properties:
+ reg:
+ minItems: 2
+ else:
+ properties:
+ reg:
+ maxItems: 1
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ serial@f991e000 {
+ compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+ reg = <0xf991e000 0x1000>;
+ interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&blsp1_uart2_apps_cxc>, <&blsp1_ahb_cxc>;
+ clock-names = "core", "iface";
+ dmas = <&dma0 0>, <&dma0 1>;
+ dma-names = "tx", "rx";
+ };
diff --git a/Documentation/devicetree/bindings/serial/qcom,serial-geni-qcom.yaml b/Documentation/devicetree/bindings/serial/qcom,serial-geni-qcom.yaml
new file mode 100644
index 000000000..05a699980
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/qcom,serial-geni-qcom.yaml
@@ -0,0 +1,86 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/serial/qcom,serial-geni-qcom.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Qualcomm Geni based QUP UART interface
+
+maintainers:
+ - Andy Gross <agross@kernel.org>
+ - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+allOf:
+ - $ref: /schemas/serial/serial.yaml#
+
+properties:
+ compatible:
+ enum:
+ - qcom,geni-uart
+ - qcom,geni-debug-uart
+
+ clocks:
+ maxItems: 1
+
+ clock-names:
+ const: se
+
+ interconnects:
+ maxItems: 2
+
+ interconnect-names:
+ items:
+ - const: qup-core
+ - const: qup-config
+
+ interrupts:
+ minItems: 1
+ items:
+ - description: UART core irq
+ - description: Wakeup irq (RX GPIO)
+
+ operating-points-v2: true
+
+ pinctrl-0: true
+ pinctrl-1: true
+
+ pinctrl-names:
+ minItems: 1
+ items:
+ - const: default
+ - const: sleep
+
+ power-domains:
+ maxItems: 1
+
+ reg:
+ maxItems: 1
+
+required:
+ - compatible
+ - clocks
+ - clock-names
+ - interrupts
+ - reg
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/clock/qcom,gcc-sc7180.h>
+ #include <dt-bindings/interconnect/qcom,sc7180.h>
+
+ serial@a88000 {
+ compatible = "qcom,geni-uart";
+ reg = <0xa88000 0x7000>;
+ interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+ pinctrl-0 = <&qup_uart0_default>;
+ pinctrl-names = "default";
+ interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
+ <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>;
+ interconnect-names = "qup-core", "qup-config";
+ };
+...
diff --git a/Documentation/devicetree/bindings/serial/rda,8810pl-uart.yaml b/Documentation/devicetree/bindings/serial/rda,8810pl-uart.yaml
new file mode 100644
index 000000000..5f4ed8221
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/rda,8810pl-uart.yaml
@@ -0,0 +1,46 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/serial/rda,8810pl-uart.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: RDA Micro UART Interface
+
+maintainers:
+ - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+
+allOf:
+ - $ref: serial.yaml#
+
+properties:
+ compatible:
+ const: rda,8810pl-uart
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ uart3: serial@20a90000 {
+ compatible = "rda,8810pl-uart";
+ reg = <0x20a90000 0x1000>;
+ interrupts = <11 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&uart_clk>;
+ };
+...
diff --git a/Documentation/devicetree/bindings/serial/renesas,em-uart.yaml b/Documentation/devicetree/bindings/serial/renesas,em-uart.yaml
new file mode 100644
index 000000000..b25aca733
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/renesas,em-uart.yaml
@@ -0,0 +1,74 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/serial/renesas,em-uart.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Renesas EMMA Mobile UART Interface
+
+maintainers:
+ - Magnus Damm <magnus.damm@gmail.com>
+
+properties:
+ compatible:
+ oneOf:
+ - items:
+ - enum:
+ - renesas,r9a09g011-uart # RZ/V2M
+ - const: renesas,em-uart # generic EMMA Mobile compatible UART
+
+ - items:
+ - const: renesas,em-uart # generic EMMA Mobile compatible UART
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ minItems: 1
+ items:
+ - description: UART functional clock
+ - description: Internal clock to access the registers
+
+ clock-names:
+ minItems: 1
+ items:
+ - const: sclk
+ - const: pclk
+
+allOf:
+ - $ref: serial.yaml#
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: renesas,r9a09g011-uart
+ then:
+ properties:
+ clocks:
+ minItems: 2
+ clock-names:
+ minItems: 2
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - clock-names
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ uart0: serial@e1020000 {
+ compatible = "renesas,em-uart";
+ reg = <0xe1020000 0x38>;
+ interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&usia_u0_sclk>;
+ clock-names = "sclk";
+ };
diff --git a/Documentation/devicetree/bindings/serial/renesas,hscif.yaml b/Documentation/devicetree/bindings/serial/renesas,hscif.yaml
new file mode 100644
index 000000000..1957b9d78
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/renesas,hscif.yaml
@@ -0,0 +1,150 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/serial/renesas,hscif.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Renesas High Speed Serial Communication Interface with FIFO (HSCIF)
+
+maintainers:
+ - Geert Uytterhoeven <geert+renesas@glider.be>
+
+allOf:
+ - $ref: serial.yaml#
+
+properties:
+ compatible:
+ oneOf:
+ - items:
+ - enum:
+ - renesas,hscif-r8a7778 # R-Car M1
+ - renesas,hscif-r8a7779 # R-Car H1
+ - const: renesas,rcar-gen1-hscif # R-Car Gen1
+ - const: renesas,hscif # generic HSCIF compatible UART
+
+ - items:
+ - enum:
+ - renesas,hscif-r8a7742 # RZ/G1H
+ - renesas,hscif-r8a7743 # RZ/G1M
+ - renesas,hscif-r8a7744 # RZ/G1N
+ - renesas,hscif-r8a7745 # RZ/G1E
+ - renesas,hscif-r8a77470 # RZ/G1C
+ - renesas,hscif-r8a7790 # R-Car H2
+ - renesas,hscif-r8a7791 # R-Car M2-W
+ - renesas,hscif-r8a7792 # R-Car V2H
+ - renesas,hscif-r8a7793 # R-Car M2-N
+ - renesas,hscif-r8a7794 # R-Car E2
+ - const: renesas,rcar-gen2-hscif # R-Car Gen2 and RZ/G1
+ - const: renesas,hscif # generic HSCIF compatible UART
+
+ - items:
+ - enum:
+ - renesas,hscif-r8a774a1 # RZ/G2M
+ - renesas,hscif-r8a774b1 # RZ/G2N
+ - renesas,hscif-r8a774c0 # RZ/G2E
+ - renesas,hscif-r8a774e1 # RZ/G2H
+ - renesas,hscif-r8a7795 # R-Car H3
+ - renesas,hscif-r8a7796 # R-Car M3-W
+ - renesas,hscif-r8a77961 # R-Car M3-W+
+ - renesas,hscif-r8a77965 # R-Car M3-N
+ - renesas,hscif-r8a77970 # R-Car V3M
+ - renesas,hscif-r8a77980 # R-Car V3H
+ - renesas,hscif-r8a77990 # R-Car E3
+ - renesas,hscif-r8a77995 # R-Car D3
+ - const: renesas,rcar-gen3-hscif # R-Car Gen3 and RZ/G2
+ - const: renesas,hscif # generic HSCIF compatible UART
+
+ - items:
+ - enum:
+ - renesas,hscif-r8a779a0 # R-Car V3U
+ - renesas,hscif-r8a779f0 # R-Car S4-8
+ - renesas,hscif-r8a779g0 # R-Car V4H
+ - const: renesas,rcar-gen4-hscif # R-Car Gen4
+ - const: renesas,hscif # generic HSCIF compatible UART
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ minItems: 1
+ maxItems: 4
+
+ clock-names:
+ minItems: 1
+ maxItems: 4
+ items:
+ enum:
+ - fck # UART functional clock
+ - hsck # optional external clock input
+ - brg_int # optional internal clock source for BRG frequency divider
+ - scif_clk # optional external clock source for BRG frequency divider
+
+ power-domains:
+ maxItems: 1
+
+ resets:
+ maxItems: 1
+
+ dmas:
+ minItems: 2
+ maxItems: 4
+ description:
+ Must contain a list of pairs of references to DMA specifiers, one for
+ transmission, and one for reception.
+
+ dma-names:
+ minItems: 2
+ maxItems: 4
+ items:
+ enum:
+ - tx
+ - rx
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - clock-names
+ - power-domains
+
+unevaluatedProperties: false
+
+if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - renesas,rcar-gen2-hscif
+ - renesas,rcar-gen3-hscif
+ - renesas,rcar-gen4-hscif
+then:
+ required:
+ - resets
+
+examples:
+ - |
+ #include <dt-bindings/clock/r8a7795-cpg-mssr.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/power/r8a7795-sysc.h>
+ aliases {
+ serial1 = &hscif1;
+ };
+
+ hscif1: serial@e6550000 {
+ compatible = "renesas,hscif-r8a7795", "renesas,rcar-gen3-hscif",
+ "renesas,hscif";
+ reg = <0xe6550000 96>;
+ interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 519>, <&cpg CPG_CORE R8A7795_CLK_S3D1>,
+ <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
+ dmas = <&dmac1 0x33>, <&dmac1 0x32>, <&dmac2 0x33>, <&dmac2 0x32>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 519>;
+ uart-has-rtscts;
+ };
diff --git a/Documentation/devicetree/bindings/serial/renesas,sci.yaml b/Documentation/devicetree/bindings/serial/renesas,sci.yaml
new file mode 100644
index 000000000..bf7708a7a
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/renesas,sci.yaml
@@ -0,0 +1,109 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/serial/renesas,sci.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Renesas Serial Communication Interface
+
+maintainers:
+ - Geert Uytterhoeven <geert+renesas@glider.be>
+
+allOf:
+ - $ref: serial.yaml#
+
+properties:
+ compatible:
+ oneOf:
+ - items:
+ - enum:
+ - renesas,r9a07g043-sci # RZ/G2UL
+ - renesas,r9a07g044-sci # RZ/G2{L,LC}
+ - renesas,r9a07g054-sci # RZ/V2L
+ - const: renesas,sci # generic SCI compatible UART
+
+ - items:
+ - const: renesas,sci # generic SCI compatible UART
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ items:
+ - description: Error interrupt
+ - description: Receive buffer full interrupt
+ - description: Transmit buffer empty interrupt
+ - description: Transmit end interrupt
+
+ interrupt-names:
+ items:
+ - const: eri
+ - const: rxi
+ - const: txi
+ - const: tei
+
+ clocks:
+ minItems: 1
+ maxItems: 2
+
+ clock-names:
+ minItems: 1
+ maxItems: 2
+ items:
+ enum:
+ - fck # UART functional clock
+ - sck # optional external clock input
+
+ uart-has-rtscts: false
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - clock-names
+
+if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - renesas,r9a07g043-sci
+ - renesas,r9a07g044-sci
+ - renesas,r9a07g054-sci
+then:
+ properties:
+ resets:
+ maxItems: 1
+
+ power-domains:
+ maxItems: 1
+
+ required:
+ - resets
+ - power-domains
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/r9a07g044-cpg.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ aliases {
+ serial0 = &sci0;
+ };
+
+ sci0: serial@1004d000 {
+ compatible = "renesas,r9a07g044-sci", "renesas,sci";
+ reg = <0x1004d000 0x400>;
+ interrupts = <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "eri", "rxi", "txi", "tei";
+ clocks = <&cpg CPG_MOD R9A07G044_SCI0_CLKP>;
+ clock-names = "fck";
+ power-domains = <&cpg>;
+ resets = <&cpg R9A07G044_SCI0_RST>;
+ };
diff --git a/Documentation/devicetree/bindings/serial/renesas,scif.yaml b/Documentation/devicetree/bindings/serial/renesas,scif.yaml
new file mode 100644
index 000000000..52c094873
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/renesas,scif.yaml
@@ -0,0 +1,197 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/serial/renesas,scif.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Renesas Serial Communication Interface with FIFO (SCIF)
+
+maintainers:
+ - Geert Uytterhoeven <geert+renesas@glider.be>
+
+allOf:
+ - $ref: serial.yaml#
+
+properties:
+ compatible:
+ oneOf:
+ - items:
+ - enum:
+ - renesas,scif-r7s72100 # RZ/A1H
+ - const: renesas,scif # generic SCIF compatible UART
+
+ - items:
+ - enum:
+ - renesas,scif-r7s9210 # RZ/A2
+
+ - items:
+ - enum:
+ - renesas,scif-r8a7778 # R-Car M1
+ - renesas,scif-r8a7779 # R-Car H1
+ - const: renesas,rcar-gen1-scif # R-Car Gen1
+ - const: renesas,scif # generic SCIF compatible UART
+
+ - items:
+ - enum:
+ - renesas,scif-r8a7742 # RZ/G1H
+ - renesas,scif-r8a7743 # RZ/G1M
+ - renesas,scif-r8a7744 # RZ/G1N
+ - renesas,scif-r8a7745 # RZ/G1E
+ - renesas,scif-r8a77470 # RZ/G1C
+ - renesas,scif-r8a7790 # R-Car H2
+ - renesas,scif-r8a7791 # R-Car M2-W
+ - renesas,scif-r8a7792 # R-Car V2H
+ - renesas,scif-r8a7793 # R-Car M2-N
+ - renesas,scif-r8a7794 # R-Car E2
+ - const: renesas,rcar-gen2-scif # R-Car Gen2 and RZ/G1
+ - const: renesas,scif # generic SCIF compatible UART
+
+ - items:
+ - enum:
+ - renesas,scif-r8a774a1 # RZ/G2M
+ - renesas,scif-r8a774b1 # RZ/G2N
+ - renesas,scif-r8a774c0 # RZ/G2E
+ - renesas,scif-r8a774e1 # RZ/G2H
+ - renesas,scif-r8a7795 # R-Car H3
+ - renesas,scif-r8a7796 # R-Car M3-W
+ - renesas,scif-r8a77961 # R-Car M3-W+
+ - renesas,scif-r8a77965 # R-Car M3-N
+ - renesas,scif-r8a77970 # R-Car V3M
+ - renesas,scif-r8a77980 # R-Car V3H
+ - renesas,scif-r8a77990 # R-Car E3
+ - renesas,scif-r8a77995 # R-Car D3
+ - const: renesas,rcar-gen3-scif # R-Car Gen3 and RZ/G2
+ - const: renesas,scif # generic SCIF compatible UART
+
+ - items:
+ - enum:
+ - renesas,scif-r8a779a0 # R-Car V3U
+ - renesas,scif-r8a779f0 # R-Car S4-8
+ - const: renesas,rcar-gen4-scif # R-Car Gen4
+ - const: renesas,scif # generic SCIF compatible UART
+
+ - items:
+ - enum:
+ - renesas,scif-r9a07g044 # RZ/G2{L,LC}
+
+ - items:
+ - enum:
+ - renesas,scif-r9a07g043 # RZ/G2UL and RZ/Five
+ - renesas,scif-r9a07g054 # RZ/V2L
+ - const: renesas,scif-r9a07g044 # RZ/G2{L,LC} fallback
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ oneOf:
+ - items:
+ - description: A combined interrupt
+ - items:
+ - description: Error interrupt
+ - description: Receive buffer full interrupt
+ - description: Transmit buffer empty interrupt
+ - description: Break interrupt
+ - items:
+ - description: Error interrupt
+ - description: Receive buffer full interrupt
+ - description: Transmit buffer empty interrupt
+ - description: Break interrupt
+ - description: Data Ready interrupt
+ - description: Transmit End interrupt
+
+ interrupt-names:
+ oneOf:
+ - items:
+ - const: eri
+ - const: rxi
+ - const: txi
+ - const: bri
+ - items:
+ - const: eri
+ - const: rxi
+ - const: txi
+ - const: bri
+ - const: dri
+ - const: tei
+
+ clocks:
+ minItems: 1
+ maxItems: 4
+
+ clock-names:
+ minItems: 1
+ maxItems: 4
+ items:
+ enum:
+ - fck # UART functional clock
+ - sck # optional external clock input
+ - brg_int # optional internal clock source for BRG frequency divider
+ - scif_clk # optional external clock source for BRG frequency divider
+
+ power-domains:
+ maxItems: 1
+
+ resets:
+ maxItems: 1
+
+ dmas:
+ minItems: 2
+ maxItems: 4
+ description:
+ Must contain a list of pairs of references to DMA specifiers, one for
+ transmission, and one for reception.
+
+ dma-names:
+ minItems: 2
+ maxItems: 4
+ items:
+ enum:
+ - tx
+ - rx
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - clock-names
+ - power-domains
+
+if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - renesas,rcar-gen2-scif
+ - renesas,rcar-gen3-scif
+ - renesas,rcar-gen4-scif
+ - renesas,scif-r9a07g044
+then:
+ required:
+ - resets
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/r8a7791-cpg-mssr.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/power/r8a7791-sysc.h>
+ aliases {
+ serial0 = &scif0;
+ };
+
+ scif0: serial@e6e60000 {
+ compatible = "renesas,scif-r8a7791", "renesas,rcar-gen2-scif",
+ "renesas,scif";
+ reg = <0xe6e60000 64>;
+ interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 721>, <&cpg CPG_CORE R8A7791_CLK_ZS>,
+ <&scif_clk>;
+ clock-names = "fck", "brg_int", "scif_clk";
+ dmas = <&dmac0 0x29>, <&dmac0 0x2a>, <&dmac1 0x29>, <&dmac1 0x2a>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+ resets = <&cpg 721>;
+ };
diff --git a/Documentation/devicetree/bindings/serial/renesas,scifa.yaml b/Documentation/devicetree/bindings/serial/renesas,scifa.yaml
new file mode 100644
index 000000000..3c67d3202
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/renesas,scifa.yaml
@@ -0,0 +1,112 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/serial/renesas,scifa.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Renesas Serial Communications Interface with FIFO A (SCIFA)
+
+maintainers:
+ - Geert Uytterhoeven <geert+renesas@glider.be>
+
+allOf:
+ - $ref: serial.yaml#
+
+properties:
+ compatible:
+ oneOf:
+ - items:
+ - enum:
+ - renesas,scifa-r8a73a4 # R-Mobile APE6
+ - renesas,scifa-r8a7740 # R-Mobile A1
+ - renesas,scifa-sh73a0 # SH-Mobile AG5
+ - const: renesas,scifa # generic SCIFA compatible UART
+
+ - items:
+ - enum:
+ - renesas,scifa-r8a7742 # RZ/G1H
+ - renesas,scifa-r8a7743 # RZ/G1M
+ - renesas,scifa-r8a7744 # RZ/G1N
+ - renesas,scifa-r8a7745 # RZ/G1E
+ - renesas,scifa-r8a7790 # R-Car H2
+ - renesas,scifa-r8a7791 # R-Car M2-W
+ - renesas,scifa-r8a7793 # R-Car M2-N
+ - renesas,scifa-r8a7794 # R-Car E2
+ - const: renesas,rcar-gen2-scifa # R-Car Gen2 and RZ/G1
+ - const: renesas,scifa # generic SCIFA compatible UART
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ clock-names:
+ enum:
+ - fck # UART functional clock
+
+ power-domains:
+ maxItems: 1
+
+ resets:
+ maxItems: 1
+
+ dmas:
+ minItems: 2
+ maxItems: 4
+ description:
+ Must contain a list of pairs of references to DMA specifiers, one for
+ transmission, and one for reception.
+
+ dma-names:
+ minItems: 2
+ maxItems: 4
+ items:
+ enum:
+ - tx
+ - rx
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - clock-names
+ - power-domains
+
+unevaluatedProperties: false
+
+if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - renesas,rcar-gen2-scifa
+then:
+ required:
+ - resets
+
+examples:
+ - |
+ #include <dt-bindings/clock/r8a7790-cpg-mssr.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/power/r8a7790-sysc.h>
+ aliases {
+ serial0 = &scifa0;
+ };
+
+ scifa0: serial@e6c40000 {
+ compatible = "renesas,scifa-r8a7790", "renesas,rcar-gen2-scifa",
+ "renesas,scifa";
+ reg = <0xe6c40000 64>;
+ interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 204>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+ resets = <&cpg 204>;
+ dmas = <&dmac0 0x21>, <&dmac0 0x22>, <&dmac1 0x21>, <&dmac1 0x22>;
+ dma-names = "tx", "rx", "tx", "rx";
+ };
diff --git a/Documentation/devicetree/bindings/serial/renesas,scifb.yaml b/Documentation/devicetree/bindings/serial/renesas,scifb.yaml
new file mode 100644
index 000000000..d5571c7a4
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/renesas,scifb.yaml
@@ -0,0 +1,103 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/serial/renesas,scifb.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Renesas Serial Communications Interface with FIFO B (SCIFB)
+
+maintainers:
+ - Geert Uytterhoeven <geert+renesas@glider.be>
+
+allOf:
+ - $ref: serial.yaml#
+
+properties:
+ compatible:
+ oneOf:
+ - items:
+ - enum:
+ - renesas,scifb-r8a73a4 # R-Mobile APE6
+ - renesas,scifb-r8a7740 # R-Mobile A1
+ - renesas,scifb-sh73a0 # SH-Mobile AG5
+ - const: renesas,scifb # generic SCIFB compatible UART
+
+ - items:
+ - enum:
+ - renesas,scifb-r8a7742 # RZ/G1H
+ - renesas,scifb-r8a7743 # RZ/G1M
+ - renesas,scifb-r8a7744 # RZ/G1N
+ - renesas,scifb-r8a7745 # RZ/G1E
+ - renesas,scifb-r8a7790 # R-Car H2
+ - renesas,scifb-r8a7791 # R-Car M2-W
+ - renesas,scifb-r8a7793 # R-Car M2-N
+ - renesas,scifb-r8a7794 # R-Car E2
+ - const: renesas,rcar-gen2-scifb # R-Car Gen2 and RZ/G1
+ - const: renesas,scifb # generic SCIFB compatible UART
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ clock-names:
+ enum:
+ - fck # UART functional clock
+
+ power-domains:
+ maxItems: 1
+
+ resets:
+ maxItems: 1
+
+ dmas:
+ minItems: 2
+ maxItems: 4
+ description:
+ Must contain a list of pairs of references to DMA specifiers, one for
+ transmission, and one for reception.
+
+ dma-names:
+ minItems: 2
+ maxItems: 4
+ items:
+ enum:
+ - tx
+ - rx
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - clock-names
+ - power-domains
+
+unevaluatedProperties: false
+
+if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - renesas,rcar-gen2-scifb
+then:
+ required:
+ - resets
+
+examples:
+ - |
+ #include <dt-bindings/clock/r8a7740-clock.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ scifb: serial@e6c30000 {
+ compatible = "renesas,scifb-r8a7740", "renesas,scifb";
+ reg = <0xe6c30000 0x100>;
+ interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp2_clks R8A7740_CLK_SCIFB>;
+ clock-names = "fck";
+ power-domains = <&pd_a3sp>;
+ };
diff --git a/Documentation/devicetree/bindings/serial/rs485.txt b/Documentation/devicetree/bindings/serial/rs485.txt
new file mode 100644
index 000000000..a7fe93efc
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/rs485.txt
@@ -0,0 +1 @@
+See rs485.yaml
diff --git a/Documentation/devicetree/bindings/serial/rs485.yaml b/Documentation/devicetree/bindings/serial/rs485.yaml
new file mode 100644
index 000000000..90a1bab40
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/rs485.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/serial/rs485.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: RS485 serial communications Bindings
+
+description: The RTS signal is capable of automatically controlling line
+ direction for the built-in half-duplex mode. The properties described
+ hereafter shall be given to a half-duplex capable UART node.
+
+maintainers:
+ - Rob Herring <robh@kernel.org>
+
+properties:
+ rs485-rts-delay:
+ description: prop-encoded-array <a b>
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ items:
+ items:
+ - description: Delay between rts signal and beginning of data sent in
+ milliseconds. It corresponds to the delay before sending data.
+ default: 0
+ maximum: 100
+ - description: Delay between end of data sent and rts signal in milliseconds.
+ It corresponds to the delay after sending data and actual release
+ of the line.
+ default: 0
+ maximum: 100
+
+ rs485-rts-active-low:
+ description: drive RTS low when sending (default is high).
+ $ref: /schemas/types.yaml#/definitions/flag
+
+ rs485-rx-active-high:
+ description: Polarity of receiver enable signal (when separate from RTS).
+ True indicates active high (default is low).
+ $ref: /schemas/types.yaml#/definitions/flag
+
+ linux,rs485-enabled-at-boot-time:
+ description: enables the rs485 feature at boot time. It can be disabled
+ later with proper ioctl.
+ $ref: /schemas/types.yaml#/definitions/flag
+
+ rs485-rx-during-tx:
+ description: enables the receiving of data even while sending data.
+ $ref: /schemas/types.yaml#/definitions/flag
+
+ rs485-term-gpios:
+ description: GPIO pin to enable RS485 bus termination.
+ maxItems: 1
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/serial/samsung_uart.yaml b/Documentation/devicetree/bindings/serial/samsung_uart.yaml
new file mode 100644
index 000000000..8bd88d5cb
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/samsung_uart.yaml
@@ -0,0 +1,145 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/serial/samsung_uart.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S3C, S5P, Exynos, and S5L (Apple SoC) SoC UART Controller
+
+maintainers:
+ - Krzysztof Kozlowski <krzk@kernel.org>
+ - Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+
+description: |+
+ Each Samsung UART should have an alias correctly numbered in the "aliases"
+ node, according to serialN format, where N is the port number (non-negative
+ decimal integer) as specified by User's Manual of respective SoC.
+
+properties:
+ compatible:
+ oneOf:
+ - items:
+ - const: samsung,exynosautov9-uart
+ - const: samsung,exynos850-uart
+ - enum:
+ - apple,s5l-uart
+ - axis,artpec8-uart
+ - samsung,s3c2410-uart
+ - samsung,s3c2412-uart
+ - samsung,s3c2440-uart
+ - samsung,s3c6400-uart
+ - samsung,s5pv210-uart
+ - samsung,exynos4210-uart
+ - samsung,exynos5433-uart
+ - samsung,exynos850-uart
+
+ reg:
+ maxItems: 1
+
+ reg-io-width:
+ description: |
+ The size (in bytes) of the IO accesses that should be performed
+ on the device.
+ enum: [ 1, 4 ]
+
+ clocks:
+ minItems: 2
+ maxItems: 5
+
+ clock-names:
+ description: N = 0 is allowed for SoCs without internal baud clock mux.
+ minItems: 2
+ items:
+ - const: uart
+ - pattern: '^clk_uart_baud[0-3]$'
+ - pattern: '^clk_uart_baud[0-3]$'
+ - pattern: '^clk_uart_baud[0-3]$'
+ - pattern: '^clk_uart_baud[0-3]$'
+
+ dmas:
+ items:
+ - description: DMA controller phandle and request line for RX
+ - description: DMA controller phandle and request line for TX
+
+ dma-names:
+ items:
+ - const: rx
+ - const: tx
+
+ interrupts:
+ description: RX interrupt and optionally TX interrupt.
+ minItems: 1
+ maxItems: 2
+
+ power-domains:
+ maxItems: 1
+
+ samsung,uart-fifosize:
+ description: The fifo size supported by the UART channel.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [16, 64, 256]
+
+required:
+ - compatible
+ - clocks
+ - clock-names
+ - interrupts
+ - reg
+
+unevaluatedProperties: false
+
+allOf:
+ - $ref: serial.yaml#
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - samsung,s3c2410-uart
+ - samsung,s5pv210-uart
+ then:
+ properties:
+ clocks:
+ minItems: 2
+ maxItems: 3
+ clock-names:
+ minItems: 2
+ items:
+ - const: uart
+ - pattern: '^clk_uart_baud[0-1]$'
+ - pattern: '^clk_uart_baud[0-1]$'
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - apple,s5l-uart
+ - axis,artpec8-uart
+ - samsung,exynos4210-uart
+ - samsung,exynos5433-uart
+ then:
+ properties:
+ clocks:
+ maxItems: 2
+ clock-names:
+ items:
+ - const: uart
+ - const: clk_uart_baud0
+
+examples:
+ - |
+ #include <dt-bindings/clock/samsung,s3c64xx-clock.h>
+
+ uart0: serial@7f005000 {
+ compatible = "samsung,s3c6400-uart";
+ reg = <0x7f005000 0x100>;
+ interrupt-parent = <&vic1>;
+ interrupts = <5>;
+ clock-names = "uart", "clk_uart_baud2",
+ "clk_uart_baud3";
+ clocks = <&clocks PCLK_UART0>, <&clocks PCLK_UART0>,
+ <&clocks SCLK_UART>;
+ samsung,uart-fifosize = <16>;
+ };
diff --git a/Documentation/devicetree/bindings/serial/serial.yaml b/Documentation/devicetree/bindings/serial/serial.yaml
new file mode 100644
index 000000000..c75ba3fb6
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/serial.yaml
@@ -0,0 +1,153 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/serial/serial.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Serial Interface Generic DT Bindings
+
+maintainers:
+ - Rob Herring <robh@kernel.org>
+ - Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+
+description:
+ This document lists a set of generic properties for describing UARTs in a
+ device tree. Whether these properties apply to a particular device depends
+ on the DT bindings for the actual device.
+
+ Each enabled UART may have an optional "serialN" alias in the "aliases" node,
+ where N is the port number (non-negative decimal integer) as printed on the
+ label next to the physical port.
+
+properties:
+ $nodename:
+ pattern: "^serial(@.*)?$"
+
+ label: true
+
+ cts-gpios:
+ maxItems: 1
+ description:
+ Must contain a GPIO specifier, referring to the GPIO pin to be used as
+ the UART's CTS line.
+
+ dcd-gpios:
+ maxItems: 1
+ description:
+ Must contain a GPIO specifier, referring to the GPIO pin to be used as
+ the UART's DCD line.
+
+ dsr-gpios:
+ maxItems: 1
+ description:
+ Must contain a GPIO specifier, referring to the GPIO pin to be used as
+ the UART's DSR line.
+
+ dtr-gpios:
+ maxItems: 1
+ description:
+ Must contain a GPIO specifier, referring to the GPIO pin to be used as
+ the UART's DTR line.
+
+ rng-gpios:
+ maxItems: 1
+ description:
+ Must contain a GPIO specifier, referring to the GPIO pin to be used as
+ the UART's RNG line.
+
+ rts-gpios:
+ maxItems: 1
+ description:
+ Must contain a GPIO specifier, referring to the GPIO pin to be used as
+ the UART's RTS line.
+
+ uart-has-rtscts:
+ $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ The presence of this property indicates that the UART has dedicated lines
+ for RTS/CTS hardware flow control, and that they are available for use
+ (wired and enabled by pinmux configuration). This depends on both the
+ UART hardware and the board wiring.
+
+ rx-tx-swap:
+ type: boolean
+ description: RX and TX pins are swapped.
+
+ cts-rts-swap:
+ type: boolean
+ description: CTS and RTS pins are swapped.
+
+ rx-threshold:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ RX FIFO threshold configuration (in bytes).
+
+ tx-threshold:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ TX FIFO threshold configuration (in bytes).
+
+if:
+ required:
+ - uart-has-rtscts
+then:
+ properties:
+ cts-gpios: false
+ rts-gpios: false
+
+patternProperties:
+ ".*":
+ if:
+ type: object
+ then:
+ description:
+ Serial attached devices shall be a child node of the host UART device
+ the slave device is attached to. It is expected that the attached
+ device is the only child node of the UART device. The slave device node
+ name shall reflect the generic type of device for the node.
+
+ properties:
+ compatible:
+ description:
+ Compatible of the device connected to the serial port.
+
+ max-speed:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ The maximum baud rate the device operates at.
+ This should only be present if the maximum is less than the slave
+ device can support. For example, a particular board has some
+ signal quality issue or the host processor can't support higher
+ baud rates.
+
+ current-speed:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ The current baud rate the device operates at.
+ This should only be present in case a driver has no chance to know
+ the baud rate of the slave device.
+ Examples:
+ * device supports auto-baud
+ * the rate is setup by a bootloader and there is no way to reset
+ the device
+ * device baud rate is configured by its firmware but there is no
+ way to request the actual settings
+
+ required:
+ - compatible
+
+additionalProperties: true
+
+examples:
+ - |
+ serial@1234 {
+ compatible = "ns16550a";
+ reg = <0x1234 0x20>;
+ interrupts = <1>;
+
+ bluetooth {
+ compatible = "brcm,bcm4330-bt";
+ interrupt-parent = <&gpio>;
+ interrupts = <10>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/serial/sifive-serial.yaml b/Documentation/devicetree/bindings/serial/sifive-serial.yaml
new file mode 100644
index 000000000..b0a8871e3
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/sifive-serial.yaml
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/serial/sifive-serial.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: SiFive asynchronous serial interface (UART)
+
+maintainers:
+ - Pragnesh Patel <pragnesh.patel@sifive.com>
+ - Paul Walmsley <paul.walmsley@sifive.com>
+ - Palmer Dabbelt <palmer@sifive.com>
+
+allOf:
+ - $ref: serial.yaml#
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - sifive,fu540-c000-uart
+ - sifive,fu740-c000-uart
+ - canaan,k210-uarths
+ - const: sifive,uart0
+
+ description:
+ Should be something similar to "sifive,<chip>-uart"
+ for the UART as integrated on a particular chip,
+ and "sifive,uart<version>" for the general UART IP
+ block programming model.
+
+ UART HDL that corresponds to the IP block version
+ numbers can be found here -
+
+ https://github.com/sifive/sifive-blocks/tree/master/src/main/scala/devices/uart
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/sifive-fu540-prci.h>
+ serial@10010000 {
+ compatible = "sifive,fu540-c000-uart", "sifive,uart0";
+ interrupt-parent = <&plic0>;
+ interrupts = <80>;
+ reg = <0x10010000 0x1000>;
+ clocks = <&prci FU540_PRCI_CLK_TLCLK>;
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/serial/snps-dw-apb-uart.yaml b/Documentation/devicetree/bindings/serial/snps-dw-apb-uart.yaml
new file mode 100644
index 000000000..b9c2287c5
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/snps-dw-apb-uart.yaml
@@ -0,0 +1,153 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/serial/snps-dw-apb-uart.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Synopsys DesignWare ABP UART
+
+maintainers:
+ - Rob Herring <robh@kernel.org>
+
+allOf:
+ - $ref: serial.yaml#
+
+properties:
+ compatible:
+ oneOf:
+ - items:
+ - enum:
+ - renesas,r9a06g032-uart
+ - renesas,r9a06g033-uart
+ - const: renesas,rzn1-uart
+ - items:
+ - enum:
+ - rockchip,px30-uart
+ - rockchip,rk1808-uart
+ - rockchip,rk3036-uart
+ - rockchip,rk3066-uart
+ - rockchip,rk3128-uart
+ - rockchip,rk3188-uart
+ - rockchip,rk3288-uart
+ - rockchip,rk3308-uart
+ - rockchip,rk3328-uart
+ - rockchip,rk3368-uart
+ - rockchip,rk3399-uart
+ - rockchip,rk3568-uart
+ - rockchip,rk3588-uart
+ - rockchip,rv1108-uart
+ - rockchip,rv1126-uart
+ - const: snps,dw-apb-uart
+ - items:
+ - enum:
+ - brcm,bcm11351-dw-apb-uart
+ - brcm,bcm21664-dw-apb-uart
+ - const: snps,dw-apb-uart
+ - items:
+ - enum:
+ - starfive,jh7100-hsuart
+ - starfive,jh7100-uart
+ - const: snps,dw-apb-uart
+ - const: snps,dw-apb-uart
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clock-frequency: true
+
+ clocks:
+ minItems: 1
+ maxItems: 2
+
+ clock-names:
+ items:
+ - const: baudclk
+ - const: apb_pclk
+
+ snps,uart-16550-compatible:
+ description: reflects the value of UART_16550_COMPATIBLE configuration
+ parameter. Define this if your UART does not implement the busy functionality.
+ type: boolean
+
+ resets:
+ maxItems: 1
+
+ reg-shift: true
+
+ reg-io-width: true
+
+ dcd-override:
+ description: Override the DCD modem status signal. This signal will
+ always be reported as active instead of being obtained from the modem
+ status register. Define this if your serial port does not use this
+ pin.
+ type: boolean
+
+ dsr-override:
+ description: Override the DTS modem status signal. This signal will
+ always be reported as active instead of being obtained from the modem
+ status register. Define this if your serial port does not use this
+ pin.
+ type: boolean
+
+ cts-override:
+ description: Override the CTS modem status signal. This signal will
+ always be reported as active instead of being obtained from the modem
+ status register. Define this if your serial port does not use this
+ pin.
+ type: boolean
+
+ ri-override:
+ description: Override the RI modem status signal. This signal will always
+ be reported as inactive instead of being obtained from the modem status
+ register. Define this if your serial port does not use this pin.
+ type: boolean
+
+required:
+ - compatible
+ - reg
+ - interrupts
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ serial@80230000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x80230000 0x100>;
+ clock-frequency = <3686400>;
+ interrupts = <10>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ dcd-override;
+ dsr-override;
+ cts-override;
+ ri-override;
+ };
+
+ - |
+ // Example with one clock:
+ serial@80230000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x80230000 0x100>;
+ clocks = <&baudclk>;
+ interrupts = <10>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ };
+
+ - |
+ // Example with two clocks:
+ serial@80230000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x80230000 0x100>;
+ clocks = <&baudclk>, <&apb_pclk>;
+ clock-names = "baudclk", "apb_pclk";
+ interrupts = <10>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ };
+...
diff --git a/Documentation/devicetree/bindings/serial/socionext,uniphier-uart.yaml b/Documentation/devicetree/bindings/serial/socionext,uniphier-uart.yaml
new file mode 100644
index 000000000..3d01cc355
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/socionext,uniphier-uart.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/serial/socionext,uniphier-uart.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: UniPhier UART controller
+
+maintainers:
+ - Masahiro Yamada <yamada.masahiro@socionext.com>
+
+properties:
+ compatible:
+ const: socionext,uniphier-uart
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ resets:
+ maxItems: 1
+
+ auto-flow-control:
+ description: enable automatic flow control support.
+ $ref: /schemas/types.yaml#/definitions/flag
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+
+additionalProperties: false
+
+examples:
+ - |
+ aliases {
+ serial0 = &serial0;
+ };
+
+ serial0: serial@54006800 {
+ compatible = "socionext,uniphier-uart";
+ reg = <0x54006800 0x40>;
+ interrupts = <0 33 4>;
+ clocks = <&uart_clk>;
+ };
diff --git a/Documentation/devicetree/bindings/serial/sprd-uart.yaml b/Documentation/devicetree/bindings/serial/sprd-uart.yaml
new file mode 100644
index 000000000..da0e2745b
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/sprd-uart.yaml
@@ -0,0 +1,75 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright 2019 Unisoc Inc.
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/serial/sprd-uart.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Spreadtrum serial UART
+
+maintainers:
+ - Orson Zhai <orsonzhai@gmail.com>
+ - Baolin Wang <baolin.wang7@gmail.com>
+ - Chunyan Zhang <zhang.lyra@gmail.com>
+
+properties:
+ compatible:
+ oneOf:
+ - items:
+ - enum:
+ - sprd,sc9860-uart
+ - sprd,sc9863a-uart
+ - sprd,ums512-uart
+ - const: sprd,sc9836-uart
+ - const: sprd,sc9836-uart
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ minItems: 1
+ maxItems: 3
+
+ clock-names:
+ description: |
+ "enable" for UART module enable clock, "uart" for UART clock, "source"
+ for UART source (parent) clock.
+ items:
+ - const: enable
+ - const: uart
+ - const: source
+
+ dmas:
+ minItems: 1
+ maxItems: 2
+
+ dma-names:
+ minItems: 1
+ items:
+ - const: rx
+ - const: tx
+
+required:
+ - compatible
+ - reg
+ - interrupts
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ serial@0 {
+ compatible = "sprd,sc9860-uart", "sprd,sc9836-uart";
+ reg = <0x0 0x100>;
+ interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+ dma-names = "rx", "tx";
+ dmas = <&ap_dma 19>, <&ap_dma 20>;
+ clock-names = "enable", "uart", "source";
+ clocks = <&clk_ap_apb_gates 9>, <&clk_uart0>, <&ext_26m>;
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/serial/st,stm32-uart.yaml b/Documentation/devicetree/bindings/serial/st,stm32-uart.yaml
new file mode 100644
index 000000000..333dc4272
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/st,stm32-uart.yaml
@@ -0,0 +1,133 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/serial/st,stm32-uart.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+maintainers:
+ - Erwan Le Ray <erwan.leray@foss.st.com>
+
+title: STMicroelectronics STM32 USART bindings
+
+properties:
+ compatible:
+ enum:
+ - st,stm32-uart
+ - st,stm32f7-uart
+ - st,stm32h7-uart
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ resets:
+ maxItems: 1
+
+ label:
+ description: label associated with this uart
+
+ st,hw-flow-ctrl:
+ description: enable hardware flow control (deprecated)
+ $ref: /schemas/types.yaml#/definitions/flag
+
+ uart-has-rtscts: true
+
+ rx-tx-swap: true
+
+ dmas:
+ minItems: 1
+ maxItems: 2
+
+ dma-names:
+ items:
+ enum: [ rx, tx ]
+ minItems: 1
+ maxItems: 2
+
+# cts-gpios and rts-gpios properties can be used instead of 'uart-has-rtscts'
+# or 'st,hw-flow-ctrl' (deprecated) for making use of any gpio pins for flow
+# control instead of dedicated pins.
+#
+# It should be noted that both cts-gpios/rts-gpios and 'uart-has-rtscts' or
+# 'st,hw-flow-ctrl' (deprecated) properties cannot co-exist in a design.
+ cts-gpios: true
+ rts-gpios: true
+
+ wakeup-source: true
+
+ rs485-rts-delay: true
+ rs485-rts-active-low: true
+ linux,rs485-enabled-at-boot-time: true
+ rs485-rx-during-tx: true
+
+ rx-threshold:
+ description:
+ If value is set to 1, RX FIFO threshold is disabled.
+ enum: [1, 2, 4, 8, 12, 14, 16]
+ default: 8
+
+ tx-threshold:
+ description:
+ If value is set to 1, TX FIFO threshold is disabled.
+ enum: [1, 2, 4, 8, 12, 14, 16]
+ default: 8
+
+allOf:
+ - $ref: rs485.yaml#
+ - $ref: serial.yaml#
+ - if:
+ required:
+ - st,hw-flow-ctrl
+ then:
+ properties:
+ cts-gpios: false
+ rts-gpios: false
+ - if:
+ properties:
+ compatible:
+ const: st,stm32-uart
+ then:
+ properties:
+ rx-tx-swap: false
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - st,stm32-uart
+ - st,stm32f7-uart
+ then:
+ properties:
+ rx-threshold: false
+ tx-threshold: false
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/stm32mp1-clks.h>
+ usart1: serial@40011000 {
+ compatible = "st,stm32h7-uart";
+ reg = <0x40011000 0x400>;
+ interrupts = <37>;
+ clocks = <&rcc 0 164>;
+ dmas = <&dma2 2 4 0x414 0x0>,
+ <&dma2 7 4 0x414 0x0>;
+ dma-names = "rx", "tx";
+ rx-threshold = <4>;
+ tx-threshold = <4>;
+ rs485-rts-active-low;
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/serial/st-asc.txt b/Documentation/devicetree/bindings/serial/st-asc.txt
new file mode 100644
index 000000000..75d877f59
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/st-asc.txt
@@ -0,0 +1,18 @@
+*st-asc(Serial Port)
+
+Required properties:
+- compatible : Should be "st,asc".
+- reg, reg-names, interrupts, interrupt-names : Standard way to define device
+ resources with names. look in
+ Documentation/devicetree/bindings/resource-names.txt
+
+Optional properties:
+- st,hw-flow-ctrl bool flag to enable hardware flow control.
+- st,force-m1 bool flat to force asc to be in Mode-1 recommeded
+ for high bit rates (above 19.2K)
+Example:
+serial@fe440000{
+ compatible = "st,asc";
+ reg = <0xfe440000 0x2c>;
+ interrupts = <0 209 0>;
+};
diff --git a/Documentation/devicetree/bindings/serial/sunplus,sp7021-uart.yaml b/Documentation/devicetree/bindings/serial/sunplus,sp7021-uart.yaml
new file mode 100644
index 000000000..ea1e63766
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/sunplus,sp7021-uart.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) Sunplus Co., Ltd. 2021
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/serial/sunplus,sp7021-uart.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Sunplus SoC SP7021 UART Controller
+
+maintainers:
+ - Hammer Hsieh <hammerh0314@gmail.com>
+
+allOf:
+ - $ref: serial.yaml#
+
+properties:
+ compatible:
+ const: sunplus,sp7021-uart
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ resets:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - resets
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ aliases {
+ serial0 = &uart0;
+ };
+
+ uart0: serial@9c000900 {
+ compatible = "sunplus,sp7021-uart";
+ reg = <0x9c000900 0x80>;
+ interrupt-parent = <&intc>;
+ interrupts = <53 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clkc 0x28>;
+ resets = <&rstc 0x18>;
+ };
+...
diff --git a/Documentation/devicetree/bindings/serial/vt8500-uart.txt b/Documentation/devicetree/bindings/serial/vt8500-uart.txt
new file mode 100644
index 000000000..2b64e6107
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/vt8500-uart.txt
@@ -0,0 +1,27 @@
+* VIA VT8500 and WonderMedia WM8xxx UART Controller
+
+Required properties:
+- compatible: should be "via,vt8500-uart" (for VIA/WonderMedia chips up to and
+ including WM8850/WM8950), or "wm,wm8880-uart" (for WM8880 and later)
+
+- reg: base physical address of the controller and length of memory mapped
+ region.
+
+- interrupts: hardware interrupt number
+
+- clocks: shall be the input parent clock phandle for the clock. This should
+ be the 24Mhz reference clock.
+
+Aliases may be defined to ensure the correct ordering of the uarts.
+
+Example:
+ aliases {
+ serial0 = &uart0;
+ };
+
+ uart0: serial@d8200000 {
+ compatible = "via,vt8500-uart";
+ reg = <0xd8200000 0x1040>;
+ interrupts = <32>;
+ clocks = <&clkuart0>;
+ };
diff --git a/Documentation/devicetree/bindings/serial/xlnx,opb-uartlite.yaml b/Documentation/devicetree/bindings/serial/xlnx,opb-uartlite.yaml
new file mode 100644
index 000000000..f7617b88c
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/xlnx,opb-uartlite.yaml
@@ -0,0 +1,89 @@
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/serial/xlnx,opb-uartlite.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xilinx Axi Uartlite
+
+maintainers:
+ - Peter Korsgaard <jacmet@sunsite.dk>
+
+properties:
+ compatible:
+ contains:
+ enum:
+ - xlnx,xps-uartlite-1.00.a
+ - xlnx,opb-uartlite-1.00.b
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ port-number:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: Set Uart port number
+
+ clocks:
+ maxItems: 1
+
+ clock-names:
+ const: s_axi_aclk
+
+ current-speed:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ The fixed baud rate that the device was configured for.
+
+ xlnx,data-bits:
+ enum: [5, 6, 7, 8]
+ description:
+ The fixed number of data bits that the device was configured for.
+
+ xlnx,use-parity:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1]
+ description:
+ Whether parity checking was enabled when the device was configured.
+
+ xlnx,odd-parity:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [0, 1]
+ description:
+ Whether odd parity was configured.
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - current-speed
+ - xlnx,data-bits
+ - xlnx,use-parity
+
+allOf:
+ - $ref: /schemas/serial.yaml#
+ - if:
+ properties:
+ xlnx,use-parity:
+ contains:
+ const: 1
+ then:
+ required:
+ - xlnx,odd-parity
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ serial@800c0000 {
+ compatible = "xlnx,xps-uartlite-1.00.a";
+ reg = <0x800c0000 0x10000>;
+ interrupts = <0x0 0x6e 0x1>;
+ port-number = <0>;
+ current-speed = <115200>;
+ xlnx,data-bits = <8>;
+ xlnx,use-parity = <0>;
+ };
+...