summaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree/bindings/serio/ps2-gpio.yaml
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings/serio/ps2-gpio.yaml')
-rw-r--r--Documentation/devicetree/bindings/serio/ps2-gpio.yaml64
1 files changed, 64 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/serio/ps2-gpio.yaml b/Documentation/devicetree/bindings/serio/ps2-gpio.yaml
new file mode 100644
index 000000000..a63d91723
--- /dev/null
+++ b/Documentation/devicetree/bindings/serio/ps2-gpio.yaml
@@ -0,0 +1,64 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/serio/ps2-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Bindings for GPIO based PS/2
+
+maintainers:
+ - Danilo Krummrich <danilokrummrich@dk-develop.de>
+
+properties:
+ compatible:
+ const: ps2-gpio
+
+ data-gpios:
+ description:
+ the gpio used for the data signal - this should be flagged as
+ active high using open drain with (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)
+ from <dt-bindings/gpio/gpio.h> since the signal is open drain by
+ definition
+ maxItems: 1
+
+ clk-gpios:
+ description:
+ the gpio used for the clock signal - this should be flagged as
+ active high using open drain with (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)
+ from <dt-bindings/gpio/gpio.h> since the signal is open drain by
+ definition
+ maxItems: 1
+
+ interrupts:
+ description:
+ The given interrupt should trigger on the falling edge of the clock line.
+ maxItems: 1
+
+ write-enable:
+ type: boolean
+ description:
+ Indicates whether write function is provided to serio device. Possibly
+ providing the write function will not work, because of the tough timing
+ requirements.
+
+required:
+ - compatible
+ - data-gpios
+ - clk-gpios
+ - interrupts
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ ps2 {
+ compatible = "ps2-gpio";
+ interrupt-parent = <&gpio>;
+ interrupts = <23 IRQ_TYPE_EDGE_FALLING>;
+ data-gpios = <&gpio 24 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ clk-gpios = <&gpio 23 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ write-enable;
+ };