summaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree/bindings/thermal/mediatek-thermal.txt
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings/thermal/mediatek-thermal.txt')
-rw-r--r--Documentation/devicetree/bindings/thermal/mediatek-thermal.txt49
1 files changed, 49 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/thermal/mediatek-thermal.txt b/Documentation/devicetree/bindings/thermal/mediatek-thermal.txt
new file mode 100644
index 000000000..5c7e7bdd0
--- /dev/null
+++ b/Documentation/devicetree/bindings/thermal/mediatek-thermal.txt
@@ -0,0 +1,49 @@
+* Mediatek Thermal
+
+This describes the device tree binding for the Mediatek thermal controller
+which measures the on-SoC temperatures. This device does not have its own ADC,
+instead it directly controls the AUXADC via AHB bus accesses. For this reason
+this device needs phandles to the AUXADC. Also it controls a mux in the
+apmixedsys register space via AHB bus accesses, so a phandle to the APMIXEDSYS
+is also needed.
+
+Required properties:
+- compatible:
+ - "mediatek,mt8173-thermal" : For MT8173 family of SoCs
+ - "mediatek,mt2701-thermal" : For MT2701 family of SoCs
+ - "mediatek,mt2712-thermal" : For MT2712 family of SoCs
+ - "mediatek,mt7622-thermal" : For MT7622 SoC
+ - "mediatek,mt8183-thermal" : For MT8183 family of SoCs
+ - "mediatek,mt8516-thermal", "mediatek,mt2701-thermal : For MT8516 family of SoCs
+- reg: Address range of the thermal controller
+- interrupts: IRQ for the thermal controller
+- clocks, clock-names: Clocks needed for the thermal controller. required
+ clocks are:
+ "therm": Main clock needed for register access
+ "auxadc": The AUXADC clock
+- mediatek,auxadc: A phandle to the AUXADC which the thermal controller uses
+- mediatek,apmixedsys: A phandle to the APMIXEDSYS controller.
+- #thermal-sensor-cells : Should be 0. See Documentation/devicetree/bindings/thermal/thermal-sensor.yaml for a description.
+
+Optional properties:
+- resets: Reference to the reset controller controlling the thermal controller.
+- nvmem-cells: A phandle to the calibration data provided by a nvmem device. If
+ unspecified default values shall be used.
+- nvmem-cell-names: Should be "calibration-data"
+
+Example:
+
+ thermal: thermal@1100b000 {
+ #thermal-sensor-cells = <1>;
+ compatible = "mediatek,mt8173-thermal";
+ reg = <0 0x1100b000 0 0x1000>;
+ interrupts = <0 70 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&pericfg CLK_PERI_THERM>, <&pericfg CLK_PERI_AUXADC>;
+ clock-names = "therm", "auxadc";
+ resets = <&pericfg MT8173_PERI_THERM_SW_RST>;
+ reset-names = "therm";
+ mediatek,auxadc = <&auxadc>;
+ mediatek,apmixedsys = <&apmixedsys>;
+ nvmem-cells = <&thermal_calibration_data>;
+ nvmem-cell-names = "calibration-data";
+ };