summaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree/bindings/usb/fsl,imx8mp-dwc3.yaml
diff options
context:
space:
mode:
Diffstat (limited to '')
-rw-r--r--Documentation/devicetree/bindings/usb/fsl,imx8mp-dwc3.yaml125
1 files changed, 125 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/usb/fsl,imx8mp-dwc3.yaml b/Documentation/devicetree/bindings/usb/fsl,imx8mp-dwc3.yaml
new file mode 100644
index 000000000..01ab0f922
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/fsl,imx8mp-dwc3.yaml
@@ -0,0 +1,125 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (c) 2020 NXP
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/fsl,imx8mp-dwc3.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP iMX8MP Soc USB Controller
+
+maintainers:
+ - Li Jun <jun.li@nxp.com>
+
+properties:
+ compatible:
+ const: fsl,imx8mp-dwc3
+
+ reg:
+ items:
+ - description: Address and length of the register set for HSIO Block Control
+ - description: Address and length of the register set for the wrapper of dwc3 core on the SOC.
+
+ "#address-cells":
+ enum: [ 1, 2 ]
+
+ "#size-cells":
+ enum: [ 1, 2 ]
+
+ dma-ranges:
+ description:
+ See section 2.3.9 of the DeviceTree Specification.
+
+ ranges: true
+
+ interrupts:
+ maxItems: 1
+ description: The interrupt that is asserted when a wakeup event is
+ received.
+
+ clocks:
+ description:
+ A list of phandle and clock-specifier pairs for the clocks
+ listed in clock-names.
+ items:
+ - description: system hsio root clock.
+ - description: suspend clock, used for usb wakeup logic.
+
+ clock-names:
+ items:
+ - const: hsio
+ - const: suspend
+
+ fsl,permanently-attached:
+ type: boolean
+ description:
+ Indicates if the device atached to a downstream port is
+ permanently attached.
+
+ fsl,disable-port-power-control:
+ type: boolean
+ description:
+ Indicates whether the host controller implementation includes port
+ power control. Defines Bit 3 in capability register (HCCPARAMS).
+
+ fsl,over-current-active-low:
+ type: boolean
+ description:
+ Over current signal polarity is active low.
+
+ fsl,power-active-low:
+ type: boolean
+ description:
+ Power pad (PWR) polarity is active low.
+
+# Required child node:
+
+patternProperties:
+ "^usb@[0-9a-f]+$":
+ $ref: snps,dwc3.yaml#
+
+required:
+ - compatible
+ - reg
+ - "#address-cells"
+ - "#size-cells"
+ - dma-ranges
+ - ranges
+ - clocks
+ - clock-names
+ - interrupts
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/imx8mp-clock.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ usb3_0: usb@32f10100 {
+ compatible = "fsl,imx8mp-dwc3";
+ reg = <0x32f10100 0x8>,
+ <0x381f0000 0x20>;
+ clocks = <&clk IMX8MP_CLK_HSIO_ROOT>,
+ <&clk IMX8MP_CLK_USB_ROOT>;
+ clock-names = "hsio", "suspend";
+ interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ dma-ranges = <0x40000000 0x40000000 0xc0000000>;
+ ranges;
+
+ usb@38100000 {
+ compatible = "snps,dwc3";
+ reg = <0x38100000 0x10000>;
+ clocks = <&clk IMX8MP_CLK_HSIO_AXI>,
+ <&clk IMX8MP_CLK_USB_CORE_REF>,
+ <&clk IMX8MP_CLK_USB_ROOT>;
+ clock-names = "bus_early", "ref", "suspend";
+ assigned-clocks = <&clk IMX8MP_CLK_HSIO_AXI>;
+ assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_500M>;
+ assigned-clock-rates = <500000000>;
+ interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+ phys = <&usb3_phy0>, <&usb3_phy0>;
+ phy-names = "usb2-phy", "usb3-phy";
+ snps,dis-u2-freeclk-exists-quirk;
+ };
+ };