diff options
Diffstat (limited to '')
4 files changed, 989 insertions, 0 deletions
diff --git a/Documentation/driver-api/surface_aggregator/clients/cdev.rst b/Documentation/driver-api/surface_aggregator/clients/cdev.rst new file mode 100644 index 000000000..0134a841a --- /dev/null +++ b/Documentation/driver-api/surface_aggregator/clients/cdev.rst @@ -0,0 +1,204 @@ +.. SPDX-License-Identifier: GPL-2.0+ + +.. |ssam_cdev_request| replace:: :c:type:`struct ssam_cdev_request <ssam_cdev_request>` +.. |ssam_cdev_request_flags| replace:: :c:type:`enum ssam_cdev_request_flags <ssam_cdev_request_flags>` +.. |ssam_cdev_event| replace:: :c:type:`struct ssam_cdev_event <ssam_cdev_event>` + +============================== +User-Space EC Interface (cdev) +============================== + +The ``surface_aggregator_cdev`` module provides a misc-device for the SSAM +controller to allow for a (more or less) direct connection from user-space to +the SAM EC. It is intended to be used for development and debugging, and +therefore should not be used or relied upon in any other way. Note that this +module is not loaded automatically, but instead must be loaded manually. + +The provided interface is accessible through the ``/dev/surface/aggregator`` +device-file. All functionality of this interface is provided via IOCTLs. +These IOCTLs and their respective input/output parameter structs are defined in +``include/uapi/linux/surface_aggregator/cdev.h``. + +A small python library and scripts for accessing this interface can be found +at https://github.com/linux-surface/surface-aggregator-module/tree/master/scripts/ssam. + +.. contents:: + + +Receiving Events +================ + +Events can be received by reading from the device-file. The are represented by +the |ssam_cdev_event| datatype. + +Before events are available to be read, however, the desired notifiers must be +registered via the ``SSAM_CDEV_NOTIF_REGISTER`` IOCTL. Notifiers are, in +essence, callbacks, called when the EC sends an event. They are, in this +interface, associated with a specific target category and device-file-instance. +They forward any event of this category to the buffer of the corresponding +instance, from which it can then be read. + +Notifiers themselves do not enable events on the EC. Thus, it may additionally +be necessary to enable events via the ``SSAM_CDEV_EVENT_ENABLE`` IOCTL. While +notifiers work per-client (i.e. per-device-file-instance), events are enabled +globally, for the EC and all of its clients (regardless of userspace or +non-userspace). The ``SSAM_CDEV_EVENT_ENABLE`` and ``SSAM_CDEV_EVENT_DISABLE`` +IOCTLs take care of reference counting the events, such that an event is +enabled as long as there is a client that has requested it. + +Note that enabled events are not automatically disabled once the client +instance is closed. Therefore any client process (or group of processes) should +balance their event enable calls with the corresponding event disable calls. It +is, however, perfectly valid to enable and disable events on different client +instances. For example, it is valid to set up notifiers and read events on +client instance ``A``, enable those events on instance ``B`` (note that these +will also be received by A since events are enabled/disabled globally), and +after no more events are desired, disable the previously enabled events via +instance ``C``. + + +Controller IOCTLs +================= + +The following IOCTLs are provided: + +.. flat-table:: Controller IOCTLs + :widths: 1 1 1 1 4 + :header-rows: 1 + + * - Type + - Number + - Direction + - Name + - Description + + * - ``0xA5`` + - ``1`` + - ``WR`` + - ``REQUEST`` + - Perform synchronous SAM request. + + * - ``0xA5`` + - ``2`` + - ``W`` + - ``NOTIF_REGISTER`` + - Register event notifier. + + * - ``0xA5`` + - ``3`` + - ``W`` + - ``NOTIF_UNREGISTER`` + - Unregister event notifier. + + * - ``0xA5`` + - ``4`` + - ``W`` + - ``EVENT_ENABLE`` + - Enable event source. + + * - ``0xA5`` + - ``5`` + - ``W`` + - ``EVENT_DISABLE`` + - Disable event source. + + +``SSAM_CDEV_REQUEST`` +--------------------- + +Defined as ``_IOWR(0xA5, 1, struct ssam_cdev_request)``. + +Executes a synchronous SAM request. The request specification is passed in +as argument of type |ssam_cdev_request|, which is then written to/modified +by the IOCTL to return status and result of the request. + +Request payload data must be allocated separately and is passed in via the +``payload.data`` and ``payload.length`` members. If a response is required, +the response buffer must be allocated by the caller and passed in via the +``response.data`` member. The ``response.length`` member must be set to the +capacity of this buffer, or if no response is required, zero. Upon +completion of the request, the call will write the response to the response +buffer (if its capacity allows it) and overwrite the length field with the +actual size of the response, in bytes. + +Additionally, if the request has a response, this must be indicated via the +request flags, as is done with in-kernel requests. Request flags can be set +via the ``flags`` member and the values correspond to the values found in +|ssam_cdev_request_flags|. + +Finally, the status of the request itself is returned in the ``status`` +member (a negative errno value indicating failure). Note that failure +indication of the IOCTL is separated from failure indication of the request: +The IOCTL returns a negative status code if anything failed during setup of +the request (``-EFAULT``) or if the provided argument or any of its fields +are invalid (``-EINVAL``). In this case, the status value of the request +argument may be set, providing more detail on what went wrong (e.g. +``-ENOMEM`` for out-of-memory), but this value may also be zero. The IOCTL +will return with a zero status code in case the request has been set up, +submitted, and completed (i.e. handed back to user-space) successfully from +inside the IOCTL, but the request ``status`` member may still be negative in +case the actual execution of the request failed after it has been submitted. + +A full definition of the argument struct is provided below. + +``SSAM_CDEV_NOTIF_REGISTER`` +---------------------------- + +Defined as ``_IOW(0xA5, 2, struct ssam_cdev_notifier_desc)``. + +Register a notifier for the event target category specified in the given +notifier description with the specified priority. Notifiers registration is +required to receive events, but does not enable events themselves. After a +notifier for a specific target category has been registered, all events of that +category will be forwarded to the userspace client and can then be read from +the device file instance. Note that events may have to be enabled, e.g. via the +``SSAM_CDEV_EVENT_ENABLE`` IOCTL, before the EC will send them. + +Only one notifier can be registered per target category and client instance. If +a notifier has already been registered, this IOCTL will fail with ``-EEXIST``. + +Notifiers will automatically be removed when the device file instance is +closed. + +``SSAM_CDEV_NOTIF_UNREGISTER`` +------------------------------ + +Defined as ``_IOW(0xA5, 3, struct ssam_cdev_notifier_desc)``. + +Unregisters the notifier associated with the specified target category. The +priority field will be ignored by this IOCTL. If no notifier has been +registered for this client instance and the given category, this IOCTL will +fail with ``-ENOENT``. + +``SSAM_CDEV_EVENT_ENABLE`` +-------------------------- + +Defined as ``_IOW(0xA5, 4, struct ssam_cdev_event_desc)``. + +Enable the event associated with the given event descriptor. + +Note that this call will not register a notifier itself, it will only enable +events on the controller. If you want to receive events by reading from the +device file, you will need to register the corresponding notifier(s) on that +instance. + +Events are not automatically disabled when the device file is closed. This must +be done manually, via a call to the ``SSAM_CDEV_EVENT_DISABLE`` IOCTL. + +``SSAM_CDEV_EVENT_DISABLE`` +--------------------------- + +Defined as ``_IOW(0xA5, 5, struct ssam_cdev_event_desc)``. + +Disable the event associated with the given event descriptor. + +Note that this will not unregister any notifiers. Events may still be received +and forwarded to user-space after this call. The only safe way of stopping +events from being received is unregistering all previously registered +notifiers. + + +Structures and Enums +==================== + +.. kernel-doc:: include/uapi/linux/surface_aggregator/cdev.h diff --git a/Documentation/driver-api/surface_aggregator/clients/dtx.rst b/Documentation/driver-api/surface_aggregator/clients/dtx.rst new file mode 100644 index 000000000..e7e7c2000 --- /dev/null +++ b/Documentation/driver-api/surface_aggregator/clients/dtx.rst @@ -0,0 +1,718 @@ +.. SPDX-License-Identifier: GPL-2.0+ + +.. |__u16| replace:: :c:type:`__u16 <__u16>` +.. |sdtx_event| replace:: :c:type:`struct sdtx_event <sdtx_event>` +.. |sdtx_event_code| replace:: :c:type:`enum sdtx_event_code <sdtx_event_code>` +.. |sdtx_base_info| replace:: :c:type:`struct sdtx_base_info <sdtx_base_info>` +.. |sdtx_device_mode| replace:: :c:type:`struct sdtx_device_mode <sdtx_device_mode>` + +====================================================== +User-Space DTX (Clipboard Detachment System) Interface +====================================================== + +The ``surface_dtx`` driver is responsible for proper clipboard detachment +and re-attachment handling. To this end, it provides the ``/dev/surface/dtx`` +device file, through which it can interface with a user-space daemon. This +daemon is then ultimately responsible for determining and taking necessary +actions, such as unmounting devices attached to the base, +unloading/reloading the graphics-driver, user-notifications, etc. + +There are two basic communication principles used in this driver: Commands +(in other parts of the documentation also referred to as requests) and +events. Commands are sent to the EC and may have a different implications in +different contexts. Events are sent by the EC upon some internal state +change. Commands are always driver-initiated, whereas events are always +initiated by the EC. + +.. contents:: + +Nomenclature +============ + +* **Clipboard:** + The detachable upper part of the Surface Book, housing the screen and CPU. + +* **Base:** + The lower part of the Surface Book from which the clipboard can be + detached, optionally (model dependent) housing the discrete GPU (dGPU). + +* **Latch:** + The mechanism keeping the clipboard attached to the base in normal + operation and allowing it to be detached when requested. + +* **Silently ignored commands:** + The command is accepted by the EC as a valid command and acknowledged + (following the standard communication protocol), but the EC does not act + upon it, i.e. ignores it.e upper part of the + + +Detachment Process +================== + +Warning: This part of the documentation is based on reverse engineering and +testing and thus may contain errors or be incomplete. + +Latch States +------------ + +The latch mechanism has two major states: *open* and *closed*. In the +*closed* state (default), the clipboard is secured to the base, whereas in +the *open* state, the clipboard can be removed by a user. + +The latch can additionally be locked and, correspondingly, unlocked, which +can influence the detachment procedure. Specifically, this locking mechanism +is intended to prevent the dGPU, positioned in the base of the device, from +being hot-unplugged while in use. More details can be found in the +documentation for the detachment procedure below. By default, the latch is +unlocked. + +Detachment Procedure +-------------------- + +Note that the detachment process is governed fully by the EC. The +``surface_dtx`` driver only relays events from the EC to user-space and +commands from user-space to the EC, i.e. it does not influence this process. + +The detachment process is started with the user pressing the *detach* button +on the base of the device or executing the ``SDTX_IOCTL_LATCH_REQUEST`` IOCTL. +Following that: + +1. The EC turns on the indicator led on the detach-button, sends a + *detach-request* event (``SDTX_EVENT_REQUEST``), and awaits further + instructions/commands. In case the latch is unlocked, the led will flash + green. If the latch has been locked, the led will be solid red + +2. The event is, via the ``surface_dtx`` driver, relayed to user-space, where + an appropriate user-space daemon can handle it and send instructions back + to the EC via IOCTLs provided by this driver. + +3. The EC waits for instructions from user-space and acts according to them. + If the EC does not receive any instructions in a given period, it will + time out and continue as follows: + + - If the latch is unlocked, the EC will open the latch and the clipboard + can be detached from the base. This is the exact behavior as without + this driver or any user-space daemon. See the ``SDTX_IOCTL_LATCH_CONFIRM`` + description below for more details on the follow-up behavior of the EC. + + - If the latch is locked, the EC will *not* open the latch, meaning the + clipboard cannot be detached from the base. Furthermore, the EC sends + an cancel event (``SDTX_EVENT_CANCEL``) detailing this with the cancel + reason ``SDTX_DETACH_TIMEDOUT`` (see :ref:`events` for details). + +Valid responses by a user-space daemon to a detachment request event are: + +- Execute ``SDTX_IOCTL_LATCH_REQUEST``. This will immediately abort the + detachment process. Furthermore, the EC will send a detach-request event, + similar to the user pressing the detach-button to cancel said process (see + below). + +- Execute ``SDTX_IOCTL_LATCH_CONFIRM``. This will cause the EC to open the + latch, after which the user can separate clipboard and base. + + As this changes the latch state, a *latch-status* event + (``SDTX_EVENT_LATCH_STATUS``) will be sent once the latch has been opened + successfully. If the EC fails to open the latch, e.g. due to hardware + error or low battery, a latch-cancel event (``SDTX_EVENT_CANCEL``) will be + sent with the cancel reason indicating the specific failure. + + If the latch is currently locked, the latch will automatically be + unlocked before it is opened. + +- Execute ``SDTX_IOCTL_LATCH_HEARTBEAT``. This will reset the internal timeout. + No other actions will be performed, i.e. the detachment process will neither + be completed nor canceled, and the EC will still be waiting for further + responses. + +- Execute ``SDTX_IOCTL_LATCH_CANCEL``. This will abort the detachment process, + similar to ``SDTX_IOCTL_LATCH_REQUEST``, described above, or the button + press, described below. A *generic request* event (``SDTX_EVENT_REQUEST``) + is send in response to this. In contrast to those, however, this command + does not trigger a new detachment process if none is currently in + progress. + +- Do nothing. The detachment process eventually times out as described in + point 3. + +See :ref:`ioctls` for more details on these responses. + +It is important to note that, if the user presses the detach button at any +point when a detachment operation is in progress (i.e. after the EC has sent +the initial *detach-request* event (``SDTX_EVENT_REQUEST``) and before it +received the corresponding response concluding the process), the detachment +process is canceled on the EC-level and an identical event is being sent. +Thus a *detach-request* event, by itself, does not signal the start of the +detachment process. + +The detachment process may further be canceled by the EC due to hardware +failures or a low clipboard battery. This is done via a cancel event +(``SDTX_EVENT_CANCEL``) with the corresponding cancel reason. + + +User-Space Interface Documentation +================================== + +Error Codes and Status Values +----------------------------- + +Error and status codes are divided into different categories, which can be +used to determine if the status code is an error, and, if it is, the +severity and type of that error. The current categories are: + +.. flat-table:: Overview of Status/Error Categories. + :widths: 2 1 3 + :header-rows: 1 + + * - Name + - Value + - Short Description + + * - ``STATUS`` + - ``0x0000`` + - Non-error status codes. + + * - ``RUNTIME_ERROR`` + - ``0x1000`` + - Non-critical runtime errors. + + * - ``HARDWARE_ERROR`` + - ``0x2000`` + - Critical hardware failures. + + * - ``UNKNOWN`` + - ``0xF000`` + - Unknown error codes. + +Other categories are reserved for future use. The ``SDTX_CATEGORY()`` macro +can be used to determine the category of any status value. The +``SDTX_SUCCESS()`` macro can be used to check if the status value is a +success value (``SDTX_CATEGORY_STATUS``) or if it indicates a failure. + +Unknown status or error codes sent by the EC are assigned to the ``UNKNOWN`` +category by the driver and may be implemented via their own code in the +future. + +Currently used error codes are: + +.. flat-table:: Overview of Error Codes. + :widths: 2 1 1 3 + :header-rows: 1 + + * - Name + - Category + - Value + - Short Description + + * - ``SDTX_DETACH_NOT_FEASIBLE`` + - ``RUNTIME`` + - ``0x1001`` + - Detachment not feasible due to low clipboard battery. + + * - ``SDTX_DETACH_TIMEDOUT`` + - ``RUNTIME`` + - ``0x1002`` + - Detachment process timed out while the latch was locked. + + * - ``SDTX_ERR_FAILED_TO_OPEN`` + - ``HARDWARE`` + - ``0x2001`` + - Failed to open latch. + + * - ``SDTX_ERR_FAILED_TO_REMAIN_OPEN`` + - ``HARDWARE`` + - ``0x2002`` + - Failed to keep latch open. + + * - ``SDTX_ERR_FAILED_TO_CLOSE`` + - ``HARDWARE`` + - ``0x2003`` + - Failed to close latch. + +Other error codes are reserved for future use. Non-error status codes may +overlap and are generally only unique within their use-case: + +.. flat-table:: Latch Status Codes. + :widths: 2 1 1 3 + :header-rows: 1 + + * - Name + - Category + - Value + - Short Description + + * - ``SDTX_LATCH_CLOSED`` + - ``STATUS`` + - ``0x0000`` + - Latch is closed/has been closed. + + * - ``SDTX_LATCH_OPENED`` + - ``STATUS`` + - ``0x0001`` + - Latch is open/has been opened. + +.. flat-table:: Base State Codes. + :widths: 2 1 1 3 + :header-rows: 1 + + * - Name + - Category + - Value + - Short Description + + * - ``SDTX_BASE_DETACHED`` + - ``STATUS`` + - ``0x0000`` + - Base has been detached/is not present. + + * - ``SDTX_BASE_ATTACHED`` + - ``STATUS`` + - ``0x0001`` + - Base has been attached/is present. + +Again, other codes are reserved for future use. + +.. _events: + +Events +------ + +Events can be received by reading from the device file. They are disabled by +default and have to be enabled by executing ``SDTX_IOCTL_EVENTS_ENABLE`` +first. All events follow the layout prescribed by |sdtx_event|. Specific +event types can be identified by their event code, described in +|sdtx_event_code|. Note that other event codes are reserved for future use, +thus an event parser must be able to handle any unknown/unsupported event +types gracefully, by relying on the payload length given in the event header. + +Currently provided event types are: + +.. flat-table:: Overview of DTX events. + :widths: 2 1 1 3 + :header-rows: 1 + + * - Name + - Code + - Payload + - Short Description + + * - ``SDTX_EVENT_REQUEST`` + - ``1`` + - ``0`` bytes + - Detachment process initiated/aborted. + + * - ``SDTX_EVENT_CANCEL`` + - ``2`` + - ``2`` bytes + - EC canceled detachment process. + + * - ``SDTX_EVENT_BASE_CONNECTION`` + - ``3`` + - ``4`` bytes + - Base connection state changed. + + * - ``SDTX_EVENT_LATCH_STATUS`` + - ``4`` + - ``2`` bytes + - Latch status changed. + + * - ``SDTX_EVENT_DEVICE_MODE`` + - ``5`` + - ``2`` bytes + - Device mode changed. + +Individual events in more detail: + +``SDTX_EVENT_REQUEST`` +^^^^^^^^^^^^^^^^^^^^^^ + +Sent when a detachment process is started or, if in progress, aborted by the +user, either via a detach button press or a detach request +(``SDTX_IOCTL_LATCH_REQUEST``) being sent from user-space. + +Does not have any payload. + +``SDTX_EVENT_CANCEL`` +^^^^^^^^^^^^^^^^^^^^^ + +Sent when a detachment process is canceled by the EC due to unfulfilled +preconditions (e.g. clipboard battery too low to detach) or hardware +failure. The reason for cancellation is given in the event payload detailed +below and can be one of + +* ``SDTX_DETACH_TIMEDOUT``: Detachment timed out while the latch was locked. + The latch has neither been opened nor unlocked. + +* ``SDTX_DETACH_NOT_FEASIBLE``: Detachment not feasible due to low clipboard + battery. + +* ``SDTX_ERR_FAILED_TO_OPEN``: Could not open the latch (hardware failure). + +* ``SDTX_ERR_FAILED_TO_REMAIN_OPEN``: Could not keep the latch open (hardware + failure). + +* ``SDTX_ERR_FAILED_TO_CLOSE``: Could not close the latch (hardware failure). + +Other error codes in this context are reserved for future use. + +These codes can be classified via the ``SDTX_CATEGORY()`` macro to discern +between critical hardware errors (``SDTX_CATEGORY_HARDWARE_ERROR``) or +runtime errors (``SDTX_CATEGORY_RUNTIME_ERROR``), the latter of which may +happen during normal operation if certain preconditions for detachment are +not given. + +.. flat-table:: Detachment Cancel Event Payload + :widths: 1 1 4 + :header-rows: 1 + + * - Field + - Type + - Description + + * - ``reason`` + - |__u16| + - Reason for cancellation. + +``SDTX_EVENT_BASE_CONNECTION`` +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +Sent when the base connection state has changed, i.e. when the base has been +attached, detached, or detachment has become infeasible due to low clipboard +battery. The new state and, if a base is connected, ID of the base is +provided as payload of type |sdtx_base_info| with its layout presented +below: + +.. flat-table:: Base-Connection-Change Event Payload + :widths: 1 1 4 + :header-rows: 1 + + * - Field + - Type + - Description + + * - ``state`` + - |__u16| + - Base connection state. + + * - ``base_id`` + - |__u16| + - Type of base connected (zero if none). + +Possible values for ``state`` are: + +* ``SDTX_BASE_DETACHED``, +* ``SDTX_BASE_ATTACHED``, and +* ``SDTX_DETACH_NOT_FEASIBLE``. + +Other values are reserved for future use. + +``SDTX_EVENT_LATCH_STATUS`` +^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +Sent when the latch status has changed, i.e. when the latch has been opened, +closed, or an error occurred. The current status is provided as payload: + +.. flat-table:: Latch-Status-Change Event Payload + :widths: 1 1 4 + :header-rows: 1 + + * - Field + - Type + - Description + + * - ``status`` + - |__u16| + - Latch status. + +Possible values for ``status`` are: + +* ``SDTX_LATCH_CLOSED``, +* ``SDTX_LATCH_OPENED``, +* ``SDTX_ERR_FAILED_TO_OPEN``, +* ``SDTX_ERR_FAILED_TO_REMAIN_OPEN``, and +* ``SDTX_ERR_FAILED_TO_CLOSE``. + +Other values are reserved for future use. + +``SDTX_EVENT_DEVICE_MODE`` +^^^^^^^^^^^^^^^^^^^^^^^^^^ + +Sent when the device mode has changed. The new device mode is provided as +payload: + +.. flat-table:: Device-Mode-Change Event Payload + :widths: 1 1 4 + :header-rows: 1 + + * - Field + - Type + - Description + + * - ``mode`` + - |__u16| + - Device operation mode. + +Possible values for ``mode`` are: + +* ``SDTX_DEVICE_MODE_TABLET``, +* ``SDTX_DEVICE_MODE_LAPTOP``, and +* ``SDTX_DEVICE_MODE_STUDIO``. + +Other values are reserved for future use. + +.. _ioctls: + +IOCTLs +------ + +The following IOCTLs are provided: + +.. flat-table:: Overview of DTX IOCTLs + :widths: 1 1 1 1 4 + :header-rows: 1 + + * - Type + - Number + - Direction + - Name + - Description + + * - ``0xA5`` + - ``0x21`` + - ``-`` + - ``EVENTS_ENABLE`` + - Enable events for the current file descriptor. + + * - ``0xA5`` + - ``0x22`` + - ``-`` + - ``EVENTS_DISABLE`` + - Disable events for the current file descriptor. + + * - ``0xA5`` + - ``0x23`` + - ``-`` + - ``LATCH_LOCK`` + - Lock the latch. + + * - ``0xA5`` + - ``0x24`` + - ``-`` + - ``LATCH_UNLOCK`` + - Unlock the latch. + + * - ``0xA5`` + - ``0x25`` + - ``-`` + - ``LATCH_REQUEST`` + - Request clipboard detachment. + + * - ``0xA5`` + - ``0x26`` + - ``-`` + - ``LATCH_CONFIRM`` + - Confirm clipboard detachment request. + + * - ``0xA5`` + - ``0x27`` + - ``-`` + - ``LATCH_HEARTBEAT`` + - Send heartbeat signal to EC. + + * - ``0xA5`` + - ``0x28`` + - ``-`` + - ``LATCH_CANCEL`` + - Cancel detachment process. + + * - ``0xA5`` + - ``0x29`` + - ``R`` + - ``GET_BASE_INFO`` + - Get current base/connection information. + + * - ``0xA5`` + - ``0x2A`` + - ``R`` + - ``GET_DEVICE_MODE`` + - Get current device operation mode. + + * - ``0xA5`` + - ``0x2B`` + - ``R`` + - ``GET_LATCH_STATUS`` + - Get current device latch status. + +``SDTX_IOCTL_EVENTS_ENABLE`` +^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +Defined as ``_IO(0xA5, 0x22)``. + +Enable events for the current file descriptor. Events can be obtained by +reading from the device, if enabled. Events are disabled by default. + +``SDTX_IOCTL_EVENTS_DISABLE`` +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +Defined as ``_IO(0xA5, 0x22)``. + +Disable events for the current file descriptor. Events can be obtained by +reading from the device, if enabled. Events are disabled by default. + +``SDTX_IOCTL_LATCH_LOCK`` +^^^^^^^^^^^^^^^^^^^^^^^^^ + +Defined as ``_IO(0xA5, 0x23)``. + +Locks the latch, causing the detachment procedure to abort without opening +the latch on timeout. The latch is unlocked by default. This command will be +silently ignored if the latch is already locked. + +``SDTX_IOCTL_LATCH_UNLOCK`` +^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +Defined as ``_IO(0xA5, 0x24)``. + +Unlocks the latch, causing the detachment procedure to open the latch on +timeout. The latch is unlocked by default. This command will not open the +latch when sent during an ongoing detachment process. It will be silently +ignored if the latch is already unlocked. + +``SDTX_IOCTL_LATCH_REQUEST`` +^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +Defined as ``_IO(0xA5, 0x25)``. + +Generic latch request. Behavior depends on the context: If no +detachment-process is active, detachment is requested. Otherwise the +currently active detachment-process will be aborted. + +If a detachment process is canceled by this operation, a generic detachment +request event (``SDTX_EVENT_REQUEST``) will be sent. + +This essentially behaves the same as a detachment button press. + +``SDTX_IOCTL_LATCH_CONFIRM`` +^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +Defined as ``_IO(0xA5, 0x26)``. + +Acknowledges and confirms a latch request. If sent during an ongoing +detachment process, this command causes the latch to be opened immediately. +The latch will also be opened if it has been locked. In this case, the latch +lock is reset to the unlocked state. + +This command will be silently ignored if there is currently no detachment +procedure in progress. + +``SDTX_IOCTL_LATCH_HEARTBEAT`` +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +Defined as ``_IO(0xA5, 0x27)``. + +Sends a heartbeat, essentially resetting the detachment timeout. This +command can be used to keep the detachment process alive while work required +for the detachment to succeed is still in progress. + +This command will be silently ignored if there is currently no detachment +procedure in progress. + +``SDTX_IOCTL_LATCH_CANCEL`` +^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +Defined as ``_IO(0xA5, 0x28)``. + +Cancels detachment in progress (if any). If a detachment process is canceled +by this operation, a generic detachment request event +(``SDTX_EVENT_REQUEST``) will be sent. + +This command will be silently ignored if there is currently no detachment +procedure in progress. + +``SDTX_IOCTL_GET_BASE_INFO`` +^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +Defined as ``_IOR(0xA5, 0x29, struct sdtx_base_info)``. + +Get the current base connection state (i.e. attached/detached) and the type +of the base connected to the clipboard. This is command essentially provides +a way to query the information provided by the base connection change event +(``SDTX_EVENT_BASE_CONNECTION``). + +Possible values for ``struct sdtx_base_info.state`` are: + +* ``SDTX_BASE_DETACHED``, +* ``SDTX_BASE_ATTACHED``, and +* ``SDTX_DETACH_NOT_FEASIBLE``. + +Other values are reserved for future use. + +``SDTX_IOCTL_GET_DEVICE_MODE`` +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +Defined as ``_IOR(0xA5, 0x2A, __u16)``. + +Returns the device operation mode, indicating if and how the base is +attached to the clipboard. This is command essentially provides a way to +query the information provided by the device mode change event +(``SDTX_EVENT_DEVICE_MODE``). + +Returned values are: + +* ``SDTX_DEVICE_MODE_LAPTOP`` +* ``SDTX_DEVICE_MODE_TABLET`` +* ``SDTX_DEVICE_MODE_STUDIO`` + +See |sdtx_device_mode| for details. Other values are reserved for future +use. + + +``SDTX_IOCTL_GET_LATCH_STATUS`` +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +Defined as ``_IOR(0xA5, 0x2B, __u16)``. + +Get the current latch status or (presumably) the last error encountered when +trying to open/close the latch. This is command essentially provides a way +to query the information provided by the latch status change event +(``SDTX_EVENT_LATCH_STATUS``). + +Returned values are: + +* ``SDTX_LATCH_CLOSED``, +* ``SDTX_LATCH_OPENED``, +* ``SDTX_ERR_FAILED_TO_OPEN``, +* ``SDTX_ERR_FAILED_TO_REMAIN_OPEN``, and +* ``SDTX_ERR_FAILED_TO_CLOSE``. + +Other values are reserved for future use. + +A Note on Base IDs +------------------ + +Base types/IDs provided via ``SDTX_EVENT_BASE_CONNECTION`` or +``SDTX_IOCTL_GET_BASE_INFO`` are directly forwarded from the EC in the lower +byte of the combined |__u16| value, with the driver storing the EC type from +which this ID comes in the high byte (without this, base IDs over different +types of ECs may be overlapping). + +The ``SDTX_DEVICE_TYPE()`` macro can be used to determine the EC device +type. This can be one of + +* ``SDTX_DEVICE_TYPE_HID``, for Surface Aggregator Module over HID, and + +* ``SDTX_DEVICE_TYPE_SSH``, for Surface Aggregator Module over Surface Serial + Hub. + +Note that currently only the ``SSH`` type EC is supported, however ``HID`` +type is reserved for future use. + +Structures and Enums +-------------------- + +.. kernel-doc:: include/uapi/linux/surface_aggregator/dtx.h + +API Users +========= + +A user-space daemon utilizing this API can be found at +https://github.com/linux-surface/surface-dtx-daemon. diff --git a/Documentation/driver-api/surface_aggregator/clients/index.rst b/Documentation/driver-api/surface_aggregator/clients/index.rst new file mode 100644 index 000000000..30160513a --- /dev/null +++ b/Documentation/driver-api/surface_aggregator/clients/index.rst @@ -0,0 +1,23 @@ +.. SPDX-License-Identifier: GPL-2.0+ + +=========================== +Client Driver Documentation +=========================== + +This is the documentation for client drivers themselves. Refer to +Documentation/driver-api/surface_aggregator/client.rst for documentation +on how to write client drivers. + +.. toctree:: + :maxdepth: 1 + + cdev + dtx + san + +.. only:: subproject and html + + Indices + ======= + + * :ref:`genindex` diff --git a/Documentation/driver-api/surface_aggregator/clients/san.rst b/Documentation/driver-api/surface_aggregator/clients/san.rst new file mode 100644 index 000000000..38c2580e7 --- /dev/null +++ b/Documentation/driver-api/surface_aggregator/clients/san.rst @@ -0,0 +1,44 @@ +.. SPDX-License-Identifier: GPL-2.0+ + +.. |san_client_link| replace:: :c:func:`san_client_link` +.. |san_dgpu_notifier_register| replace:: :c:func:`san_dgpu_notifier_register` +.. |san_dgpu_notifier_unregister| replace:: :c:func:`san_dgpu_notifier_unregister` + +=================== +Surface ACPI Notify +=================== + +The Surface ACPI Notify (SAN) device provides the bridge between ACPI and +SAM controller. Specifically, ACPI code can execute requests and handle +battery and thermal events via this interface. In addition to this, events +relating to the discrete GPU (dGPU) of the Surface Book 2 can be sent from +ACPI code (note: the Surface Book 3 uses a different method for this). The +only currently known event sent via this interface is a dGPU power-on +notification. While this driver handles the former part internally, it only +relays the dGPU events to any other driver interested via its public API and +does not handle them. + +The public interface of this driver is split into two parts: Client +registration and notifier-block registration. + +A client to the SAN interface can be linked as consumer to the SAN device +via |san_client_link|. This can be used to ensure that the a client +receiving dGPU events does not miss any events due to the SAN interface not +being set up as this forces the client driver to unbind once the SAN driver +is unbound. + +Notifier-blocks can be registered by any device for as long as the module is +loaded, regardless of being linked as client or not. Registration is done +with |san_dgpu_notifier_register|. If the notifier is not needed any more, it +should be unregistered via |san_dgpu_notifier_unregister|. + +Consult the API documentation below for more details. + + +API Documentation +================= + +.. kernel-doc:: include/linux/surface_acpi_notify.h + +.. kernel-doc:: drivers/platform/surface/surface_acpi_notify.c + :export: |