summaryrefslogtreecommitdiffstats
path: root/Documentation/networking/ethtool-netlink.rst
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/networking/ethtool-netlink.rst')
-rw-r--r--Documentation/networking/ethtool-netlink.rst1790
1 files changed, 1790 insertions, 0 deletions
diff --git a/Documentation/networking/ethtool-netlink.rst b/Documentation/networking/ethtool-netlink.rst
new file mode 100644
index 000000000..d578b8bcd
--- /dev/null
+++ b/Documentation/networking/ethtool-netlink.rst
@@ -0,0 +1,1790 @@
+=============================
+Netlink interface for ethtool
+=============================
+
+
+Basic information
+=================
+
+Netlink interface for ethtool uses generic netlink family ``ethtool``
+(userspace application should use macros ``ETHTOOL_GENL_NAME`` and
+``ETHTOOL_GENL_VERSION`` defined in ``<linux/ethtool_netlink.h>`` uapi
+header). This family does not use a specific header, all information in
+requests and replies is passed using netlink attributes.
+
+The ethtool netlink interface uses extended ACK for error and warning
+reporting, userspace application developers are encouraged to make these
+messages available to user in a suitable way.
+
+Requests can be divided into three categories: "get" (retrieving information),
+"set" (setting parameters) and "action" (invoking an action).
+
+All "set" and "action" type requests require admin privileges
+(``CAP_NET_ADMIN`` in the namespace). Most "get" type requests are allowed for
+anyone but there are exceptions (where the response contains sensitive
+information). In some cases, the request as such is allowed for anyone but
+unprivileged users have attributes with sensitive information (e.g.
+wake-on-lan password) omitted.
+
+
+Conventions
+===========
+
+Attributes which represent a boolean value usually use NLA_U8 type so that we
+can distinguish three states: "on", "off" and "not present" (meaning the
+information is not available in "get" requests or value is not to be changed
+in "set" requests). For these attributes, the "true" value should be passed as
+number 1 but any non-zero value should be understood as "true" by recipient.
+In the tables below, "bool" denotes NLA_U8 attributes interpreted in this way.
+
+In the message structure descriptions below, if an attribute name is suffixed
+with "+", parent nest can contain multiple attributes of the same type. This
+implements an array of entries.
+
+Attributes that need to be filled-in by device drivers and that are dumped to
+user space based on whether they are valid or not should not use zero as a
+valid value. This avoids the need to explicitly signal the validity of the
+attribute in the device driver API.
+
+
+Request header
+==============
+
+Each request or reply message contains a nested attribute with common header.
+Structure of this header is
+
+ ============================== ====== =============================
+ ``ETHTOOL_A_HEADER_DEV_INDEX`` u32 device ifindex
+ ``ETHTOOL_A_HEADER_DEV_NAME`` string device name
+ ``ETHTOOL_A_HEADER_FLAGS`` u32 flags common for all requests
+ ============================== ====== =============================
+
+``ETHTOOL_A_HEADER_DEV_INDEX`` and ``ETHTOOL_A_HEADER_DEV_NAME`` identify the
+device message relates to. One of them is sufficient in requests, if both are
+used, they must identify the same device. Some requests, e.g. global string
+sets, do not require device identification. Most ``GET`` requests also allow
+dump requests without device identification to query the same information for
+all devices providing it (each device in a separate message).
+
+``ETHTOOL_A_HEADER_FLAGS`` is a bitmap of request flags common for all request
+types. The interpretation of these flags is the same for all request types but
+the flags may not apply to requests. Recognized flags are:
+
+ ================================= ===================================
+ ``ETHTOOL_FLAG_COMPACT_BITSETS`` use compact format bitsets in reply
+ ``ETHTOOL_FLAG_OMIT_REPLY`` omit optional reply (_SET and _ACT)
+ ``ETHTOOL_FLAG_STATS`` include optional device statistics
+ ================================= ===================================
+
+New request flags should follow the general idea that if the flag is not set,
+the behaviour is backward compatible, i.e. requests from old clients not aware
+of the flag should be interpreted the way the client expects. A client must
+not set flags it does not understand.
+
+
+Bit sets
+========
+
+For short bitmaps of (reasonably) fixed length, standard ``NLA_BITFIELD32``
+type is used. For arbitrary length bitmaps, ethtool netlink uses a nested
+attribute with contents of one of two forms: compact (two binary bitmaps
+representing bit values and mask of affected bits) and bit-by-bit (list of
+bits identified by either index or name).
+
+Verbose (bit-by-bit) bitsets allow sending symbolic names for bits together
+with their values which saves a round trip (when the bitset is passed in a
+request) or at least a second request (when the bitset is in a reply). This is
+useful for one shot applications like traditional ethtool command. On the
+other hand, long running applications like ethtool monitor (displaying
+notifications) or network management daemons may prefer fetching the names
+only once and using compact form to save message size. Notifications from
+ethtool netlink interface always use compact form for bitsets.
+
+A bitset can represent either a value/mask pair (``ETHTOOL_A_BITSET_NOMASK``
+not set) or a single bitmap (``ETHTOOL_A_BITSET_NOMASK`` set). In requests
+modifying a bitmap, the former changes the bit set in mask to values set in
+value and preserves the rest; the latter sets the bits set in the bitmap and
+clears the rest.
+
+Compact form: nested (bitset) atrribute contents:
+
+ ============================ ====== ============================
+ ``ETHTOOL_A_BITSET_NOMASK`` flag no mask, only a list
+ ``ETHTOOL_A_BITSET_SIZE`` u32 number of significant bits
+ ``ETHTOOL_A_BITSET_VALUE`` binary bitmap of bit values
+ ``ETHTOOL_A_BITSET_MASK`` binary bitmap of valid bits
+ ============================ ====== ============================
+
+Value and mask must have length at least ``ETHTOOL_A_BITSET_SIZE`` bits
+rounded up to a multiple of 32 bits. They consist of 32-bit words in host byte
+order, words ordered from least significant to most significant (i.e. the same
+way as bitmaps are passed with ioctl interface).
+
+For compact form, ``ETHTOOL_A_BITSET_SIZE`` and ``ETHTOOL_A_BITSET_VALUE`` are
+mandatory. ``ETHTOOL_A_BITSET_MASK`` attribute is mandatory if
+``ETHTOOL_A_BITSET_NOMASK`` is not set (bitset represents a value/mask pair);
+if ``ETHTOOL_A_BITSET_NOMASK`` is not set, ``ETHTOOL_A_BITSET_MASK`` is not
+allowed (bitset represents a single bitmap.
+
+Kernel bit set length may differ from userspace length if older application is
+used on newer kernel or vice versa. If userspace bitmap is longer, an error is
+issued only if the request actually tries to set values of some bits not
+recognized by kernel.
+
+Bit-by-bit form: nested (bitset) attribute contents:
+
+ +------------------------------------+--------+-----------------------------+
+ | ``ETHTOOL_A_BITSET_NOMASK`` | flag | no mask, only a list |
+ +------------------------------------+--------+-----------------------------+
+ | ``ETHTOOL_A_BITSET_SIZE`` | u32 | number of significant bits |
+ +------------------------------------+--------+-----------------------------+
+ | ``ETHTOOL_A_BITSET_BITS`` | nested | array of bits |
+ +-+----------------------------------+--------+-----------------------------+
+ | | ``ETHTOOL_A_BITSET_BITS_BIT+`` | nested | one bit |
+ +-+-+--------------------------------+--------+-----------------------------+
+ | | | ``ETHTOOL_A_BITSET_BIT_INDEX`` | u32 | bit index (0 for LSB) |
+ +-+-+--------------------------------+--------+-----------------------------+
+ | | | ``ETHTOOL_A_BITSET_BIT_NAME`` | string | bit name |
+ +-+-+--------------------------------+--------+-----------------------------+
+ | | | ``ETHTOOL_A_BITSET_BIT_VALUE`` | flag | present if bit is set |
+ +-+-+--------------------------------+--------+-----------------------------+
+
+Bit size is optional for bit-by-bit form. ``ETHTOOL_A_BITSET_BITS`` nest can
+only contain ``ETHTOOL_A_BITSET_BITS_BIT`` attributes but there can be an
+arbitrary number of them. A bit may be identified by its index or by its
+name. When used in requests, listed bits are set to 0 or 1 according to
+``ETHTOOL_A_BITSET_BIT_VALUE``, the rest is preserved. A request fails if
+index exceeds kernel bit length or if name is not recognized.
+
+When ``ETHTOOL_A_BITSET_NOMASK`` flag is present, bitset is interpreted as
+a simple bitmap. ``ETHTOOL_A_BITSET_BIT_VALUE`` attributes are not used in
+such case. Such bitset represents a bitmap with listed bits set and the rest
+zero.
+
+In requests, application can use either form. Form used by kernel in reply is
+determined by ``ETHTOOL_FLAG_COMPACT_BITSETS`` flag in flags field of request
+header. Semantics of value and mask depends on the attribute.
+
+
+List of message types
+=====================
+
+All constants identifying message types use ``ETHTOOL_CMD_`` prefix and suffix
+according to message purpose:
+
+ ============== ======================================
+ ``_GET`` userspace request to retrieve data
+ ``_SET`` userspace request to set data
+ ``_ACT`` userspace request to perform an action
+ ``_GET_REPLY`` kernel reply to a ``GET`` request
+ ``_SET_REPLY`` kernel reply to a ``SET`` request
+ ``_ACT_REPLY`` kernel reply to an ``ACT`` request
+ ``_NTF`` kernel notification
+ ============== ======================================
+
+Userspace to kernel:
+
+ ===================================== =================================
+ ``ETHTOOL_MSG_STRSET_GET`` get string set
+ ``ETHTOOL_MSG_LINKINFO_GET`` get link settings
+ ``ETHTOOL_MSG_LINKINFO_SET`` set link settings
+ ``ETHTOOL_MSG_LINKMODES_GET`` get link modes info
+ ``ETHTOOL_MSG_LINKMODES_SET`` set link modes info
+ ``ETHTOOL_MSG_LINKSTATE_GET`` get link state
+ ``ETHTOOL_MSG_DEBUG_GET`` get debugging settings
+ ``ETHTOOL_MSG_DEBUG_SET`` set debugging settings
+ ``ETHTOOL_MSG_WOL_GET`` get wake-on-lan settings
+ ``ETHTOOL_MSG_WOL_SET`` set wake-on-lan settings
+ ``ETHTOOL_MSG_FEATURES_GET`` get device features
+ ``ETHTOOL_MSG_FEATURES_SET`` set device features
+ ``ETHTOOL_MSG_PRIVFLAGS_GET`` get private flags
+ ``ETHTOOL_MSG_PRIVFLAGS_SET`` set private flags
+ ``ETHTOOL_MSG_RINGS_GET`` get ring sizes
+ ``ETHTOOL_MSG_RINGS_SET`` set ring sizes
+ ``ETHTOOL_MSG_CHANNELS_GET`` get channel counts
+ ``ETHTOOL_MSG_CHANNELS_SET`` set channel counts
+ ``ETHTOOL_MSG_COALESCE_GET`` get coalescing parameters
+ ``ETHTOOL_MSG_COALESCE_SET`` set coalescing parameters
+ ``ETHTOOL_MSG_PAUSE_GET`` get pause parameters
+ ``ETHTOOL_MSG_PAUSE_SET`` set pause parameters
+ ``ETHTOOL_MSG_EEE_GET`` get EEE settings
+ ``ETHTOOL_MSG_EEE_SET`` set EEE settings
+ ``ETHTOOL_MSG_TSINFO_GET`` get timestamping info
+ ``ETHTOOL_MSG_CABLE_TEST_ACT`` action start cable test
+ ``ETHTOOL_MSG_CABLE_TEST_TDR_ACT`` action start raw TDR cable test
+ ``ETHTOOL_MSG_TUNNEL_INFO_GET`` get tunnel offload info
+ ``ETHTOOL_MSG_FEC_GET`` get FEC settings
+ ``ETHTOOL_MSG_FEC_SET`` set FEC settings
+ ``ETHTOOL_MSG_MODULE_EEPROM_GET`` read SFP module EEPROM
+ ``ETHTOOL_MSG_STATS_GET`` get standard statistics
+ ``ETHTOOL_MSG_PHC_VCLOCKS_GET`` get PHC virtual clocks info
+ ``ETHTOOL_MSG_MODULE_SET`` set transceiver module parameters
+ ``ETHTOOL_MSG_MODULE_GET`` get transceiver module parameters
+ ``ETHTOOL_MSG_PSE_SET`` set PSE parameters
+ ``ETHTOOL_MSG_PSE_GET`` get PSE parameters
+ ===================================== =================================
+
+Kernel to userspace:
+
+ ======================================== =================================
+ ``ETHTOOL_MSG_STRSET_GET_REPLY`` string set contents
+ ``ETHTOOL_MSG_LINKINFO_GET_REPLY`` link settings
+ ``ETHTOOL_MSG_LINKINFO_NTF`` link settings notification
+ ``ETHTOOL_MSG_LINKMODES_GET_REPLY`` link modes info
+ ``ETHTOOL_MSG_LINKMODES_NTF`` link modes notification
+ ``ETHTOOL_MSG_LINKSTATE_GET_REPLY`` link state info
+ ``ETHTOOL_MSG_DEBUG_GET_REPLY`` debugging settings
+ ``ETHTOOL_MSG_DEBUG_NTF`` debugging settings notification
+ ``ETHTOOL_MSG_WOL_GET_REPLY`` wake-on-lan settings
+ ``ETHTOOL_MSG_WOL_NTF`` wake-on-lan settings notification
+ ``ETHTOOL_MSG_FEATURES_GET_REPLY`` device features
+ ``ETHTOOL_MSG_FEATURES_SET_REPLY`` optional reply to FEATURES_SET
+ ``ETHTOOL_MSG_FEATURES_NTF`` netdev features notification
+ ``ETHTOOL_MSG_PRIVFLAGS_GET_REPLY`` private flags
+ ``ETHTOOL_MSG_PRIVFLAGS_NTF`` private flags
+ ``ETHTOOL_MSG_RINGS_GET_REPLY`` ring sizes
+ ``ETHTOOL_MSG_RINGS_NTF`` ring sizes
+ ``ETHTOOL_MSG_CHANNELS_GET_REPLY`` channel counts
+ ``ETHTOOL_MSG_CHANNELS_NTF`` channel counts
+ ``ETHTOOL_MSG_COALESCE_GET_REPLY`` coalescing parameters
+ ``ETHTOOL_MSG_COALESCE_NTF`` coalescing parameters
+ ``ETHTOOL_MSG_PAUSE_GET_REPLY`` pause parameters
+ ``ETHTOOL_MSG_PAUSE_NTF`` pause parameters
+ ``ETHTOOL_MSG_EEE_GET_REPLY`` EEE settings
+ ``ETHTOOL_MSG_EEE_NTF`` EEE settings
+ ``ETHTOOL_MSG_TSINFO_GET_REPLY`` timestamping info
+ ``ETHTOOL_MSG_CABLE_TEST_NTF`` Cable test results
+ ``ETHTOOL_MSG_CABLE_TEST_TDR_NTF`` Cable test TDR results
+ ``ETHTOOL_MSG_TUNNEL_INFO_GET_REPLY`` tunnel offload info
+ ``ETHTOOL_MSG_FEC_GET_REPLY`` FEC settings
+ ``ETHTOOL_MSG_FEC_NTF`` FEC settings
+ ``ETHTOOL_MSG_MODULE_EEPROM_GET_REPLY`` read SFP module EEPROM
+ ``ETHTOOL_MSG_STATS_GET_REPLY`` standard statistics
+ ``ETHTOOL_MSG_PHC_VCLOCKS_GET_REPLY`` PHC virtual clocks info
+ ``ETHTOOL_MSG_MODULE_GET_REPLY`` transceiver module parameters
+ ``ETHTOOL_MSG_PSE_GET_REPLY`` PSE parameters
+ ======================================== =================================
+
+``GET`` requests are sent by userspace applications to retrieve device
+information. They usually do not contain any message specific attributes.
+Kernel replies with corresponding "GET_REPLY" message. For most types, ``GET``
+request with ``NLM_F_DUMP`` and no device identification can be used to query
+the information for all devices supporting the request.
+
+If the data can be also modified, corresponding ``SET`` message with the same
+layout as corresponding ``GET_REPLY`` is used to request changes. Only
+attributes where a change is requested are included in such request (also, not
+all attributes may be changed). Replies to most ``SET`` request consist only
+of error code and extack; if kernel provides additional data, it is sent in
+the form of corresponding ``SET_REPLY`` message which can be suppressed by
+setting ``ETHTOOL_FLAG_OMIT_REPLY`` flag in request header.
+
+Data modification also triggers sending a ``NTF`` message with a notification.
+These usually bear only a subset of attributes which was affected by the
+change. The same notification is issued if the data is modified using other
+means (mostly ioctl ethtool interface). Unlike notifications from ethtool
+netlink code which are only sent if something actually changed, notifications
+triggered by ioctl interface may be sent even if the request did not actually
+change any data.
+
+``ACT`` messages request kernel (driver) to perform a specific action. If some
+information is reported by kernel (which can be suppressed by setting
+``ETHTOOL_FLAG_OMIT_REPLY`` flag in request header), the reply takes form of
+an ``ACT_REPLY`` message. Performing an action also triggers a notification
+(``NTF`` message).
+
+Later sections describe the format and semantics of these messages.
+
+
+STRSET_GET
+==========
+
+Requests contents of a string set as provided by ioctl commands
+``ETHTOOL_GSSET_INFO`` and ``ETHTOOL_GSTRINGS.`` String sets are not user
+writeable so that the corresponding ``STRSET_SET`` message is only used in
+kernel replies. There are two types of string sets: global (independent of
+a device, e.g. device feature names) and device specific (e.g. device private
+flags).
+
+Request contents:
+
+ +---------------------------------------+--------+------------------------+
+ | ``ETHTOOL_A_STRSET_HEADER`` | nested | request header |
+ +---------------------------------------+--------+------------------------+
+ | ``ETHTOOL_A_STRSET_STRINGSETS`` | nested | string set to request |
+ +-+-------------------------------------+--------+------------------------+
+ | | ``ETHTOOL_A_STRINGSETS_STRINGSET+`` | nested | one string set |
+ +-+-+-----------------------------------+--------+------------------------+
+ | | | ``ETHTOOL_A_STRINGSET_ID`` | u32 | set id |
+ +-+-+-----------------------------------+--------+------------------------+
+
+Kernel response contents:
+
+ +---------------------------------------+--------+-----------------------+
+ | ``ETHTOOL_A_STRSET_HEADER`` | nested | reply header |
+ +---------------------------------------+--------+-----------------------+
+ | ``ETHTOOL_A_STRSET_STRINGSETS`` | nested | array of string sets |
+ +-+-------------------------------------+--------+-----------------------+
+ | | ``ETHTOOL_A_STRINGSETS_STRINGSET+`` | nested | one string set |
+ +-+-+-----------------------------------+--------+-----------------------+
+ | | | ``ETHTOOL_A_STRINGSET_ID`` | u32 | set id |
+ +-+-+-----------------------------------+--------+-----------------------+
+ | | | ``ETHTOOL_A_STRINGSET_COUNT`` | u32 | number of strings |
+ +-+-+-----------------------------------+--------+-----------------------+
+ | | | ``ETHTOOL_A_STRINGSET_STRINGS`` | nested | array of strings |
+ +-+-+-+---------------------------------+--------+-----------------------+
+ | | | | ``ETHTOOL_A_STRINGS_STRING+`` | nested | one string |
+ +-+-+-+-+-------------------------------+--------+-----------------------+
+ | | | | | ``ETHTOOL_A_STRING_INDEX`` | u32 | string index |
+ +-+-+-+-+-------------------------------+--------+-----------------------+
+ | | | | | ``ETHTOOL_A_STRING_VALUE`` | string | string value |
+ +-+-+-+-+-------------------------------+--------+-----------------------+
+ | ``ETHTOOL_A_STRSET_COUNTS_ONLY`` | flag | return only counts |
+ +---------------------------------------+--------+-----------------------+
+
+Device identification in request header is optional. Depending on its presence
+a and ``NLM_F_DUMP`` flag, there are three type of ``STRSET_GET`` requests:
+
+ - no ``NLM_F_DUMP,`` no device: get "global" stringsets
+ - no ``NLM_F_DUMP``, with device: get string sets related to the device
+ - ``NLM_F_DUMP``, no device: get device related string sets for all devices
+
+If there is no ``ETHTOOL_A_STRSET_STRINGSETS`` array, all string sets of
+requested type are returned, otherwise only those specified in the request.
+Flag ``ETHTOOL_A_STRSET_COUNTS_ONLY`` tells kernel to only return string
+counts of the sets, not the actual strings.
+
+
+LINKINFO_GET
+============
+
+Requests link settings as provided by ``ETHTOOL_GLINKSETTINGS`` except for
+link modes and autonegotiation related information. The request does not use
+any attributes.
+
+Request contents:
+
+ ==================================== ====== ==========================
+ ``ETHTOOL_A_LINKINFO_HEADER`` nested request header
+ ==================================== ====== ==========================
+
+Kernel response contents:
+
+ ==================================== ====== ==========================
+ ``ETHTOOL_A_LINKINFO_HEADER`` nested reply header
+ ``ETHTOOL_A_LINKINFO_PORT`` u8 physical port
+ ``ETHTOOL_A_LINKINFO_PHYADDR`` u8 phy MDIO address
+ ``ETHTOOL_A_LINKINFO_TP_MDIX`` u8 MDI(-X) status
+ ``ETHTOOL_A_LINKINFO_TP_MDIX_CTRL`` u8 MDI(-X) control
+ ``ETHTOOL_A_LINKINFO_TRANSCEIVER`` u8 transceiver
+ ==================================== ====== ==========================
+
+Attributes and their values have the same meaning as matching members of the
+corresponding ioctl structures.
+
+``LINKINFO_GET`` allows dump requests (kernel returns reply message for all
+devices supporting the request).
+
+
+LINKINFO_SET
+============
+
+``LINKINFO_SET`` request allows setting some of the attributes reported by
+``LINKINFO_GET``.
+
+Request contents:
+
+ ==================================== ====== ==========================
+ ``ETHTOOL_A_LINKINFO_HEADER`` nested request header
+ ``ETHTOOL_A_LINKINFO_PORT`` u8 physical port
+ ``ETHTOOL_A_LINKINFO_PHYADDR`` u8 phy MDIO address
+ ``ETHTOOL_A_LINKINFO_TP_MDIX_CTRL`` u8 MDI(-X) control
+ ==================================== ====== ==========================
+
+MDI(-X) status and transceiver cannot be set, request with the corresponding
+attributes is rejected.
+
+
+LINKMODES_GET
+=============
+
+Requests link modes (supported, advertised and peer advertised) and related
+information (autonegotiation status, link speed and duplex) as provided by
+``ETHTOOL_GLINKSETTINGS``. The request does not use any attributes.
+
+Request contents:
+
+ ==================================== ====== ==========================
+ ``ETHTOOL_A_LINKMODES_HEADER`` nested request header
+ ==================================== ====== ==========================
+
+Kernel response contents:
+
+ ========================================== ====== ==========================
+ ``ETHTOOL_A_LINKMODES_HEADER`` nested reply header
+ ``ETHTOOL_A_LINKMODES_AUTONEG`` u8 autonegotiation status
+ ``ETHTOOL_A_LINKMODES_OURS`` bitset advertised link modes
+ ``ETHTOOL_A_LINKMODES_PEER`` bitset partner link modes
+ ``ETHTOOL_A_LINKMODES_SPEED`` u32 link speed (Mb/s)
+ ``ETHTOOL_A_LINKMODES_DUPLEX`` u8 duplex mode
+ ``ETHTOOL_A_LINKMODES_MASTER_SLAVE_CFG`` u8 Master/slave port mode
+ ``ETHTOOL_A_LINKMODES_MASTER_SLAVE_STATE`` u8 Master/slave port state
+ ``ETHTOOL_A_LINKMODES_RATE_MATCHING`` u8 PHY rate matching
+ ========================================== ====== ==========================
+
+For ``ETHTOOL_A_LINKMODES_OURS``, value represents advertised modes and mask
+represents supported modes. ``ETHTOOL_A_LINKMODES_PEER`` in the reply is a bit
+list.
+
+``LINKMODES_GET`` allows dump requests (kernel returns reply messages for all
+devices supporting the request).
+
+
+LINKMODES_SET
+=============
+
+Request contents:
+
+ ========================================== ====== ==========================
+ ``ETHTOOL_A_LINKMODES_HEADER`` nested request header
+ ``ETHTOOL_A_LINKMODES_AUTONEG`` u8 autonegotiation status
+ ``ETHTOOL_A_LINKMODES_OURS`` bitset advertised link modes
+ ``ETHTOOL_A_LINKMODES_PEER`` bitset partner link modes
+ ``ETHTOOL_A_LINKMODES_SPEED`` u32 link speed (Mb/s)
+ ``ETHTOOL_A_LINKMODES_DUPLEX`` u8 duplex mode
+ ``ETHTOOL_A_LINKMODES_MASTER_SLAVE_CFG`` u8 Master/slave port mode
+ ``ETHTOOL_A_LINKMODES_RATE_MATCHING`` u8 PHY rate matching
+ ``ETHTOOL_A_LINKMODES_LANES`` u32 lanes
+ ========================================== ====== ==========================
+
+``ETHTOOL_A_LINKMODES_OURS`` bit set allows setting advertised link modes. If
+autonegotiation is on (either set now or kept from before), advertised modes
+are not changed (no ``ETHTOOL_A_LINKMODES_OURS`` attribute) and at least one
+of speed, duplex and lanes is specified, kernel adjusts advertised modes to all
+supported modes matching speed, duplex, lanes or all (whatever is specified).
+This autoselection is done on ethtool side with ioctl interface, netlink
+interface is supposed to allow requesting changes without knowing what exactly
+kernel supports.
+
+
+LINKSTATE_GET
+=============
+
+Requests link state information. Link up/down flag (as provided by
+``ETHTOOL_GLINK`` ioctl command) is provided. Optionally, extended state might
+be provided as well. In general, extended state describes reasons for why a port
+is down, or why it operates in some non-obvious mode. This request does not have
+any attributes.
+
+Request contents:
+
+ ==================================== ====== ==========================
+ ``ETHTOOL_A_LINKSTATE_HEADER`` nested request header
+ ==================================== ====== ==========================
+
+Kernel response contents:
+
+ ==================================== ====== ============================
+ ``ETHTOOL_A_LINKSTATE_HEADER`` nested reply header
+ ``ETHTOOL_A_LINKSTATE_LINK`` bool link state (up/down)
+ ``ETHTOOL_A_LINKSTATE_SQI`` u32 Current Signal Quality Index
+ ``ETHTOOL_A_LINKSTATE_SQI_MAX`` u32 Max support SQI value
+ ``ETHTOOL_A_LINKSTATE_EXT_STATE`` u8 link extended state
+ ``ETHTOOL_A_LINKSTATE_EXT_SUBSTATE`` u8 link extended substate
+ ==================================== ====== ============================
+
+For most NIC drivers, the value of ``ETHTOOL_A_LINKSTATE_LINK`` returns
+carrier flag provided by ``netif_carrier_ok()`` but there are drivers which
+define their own handler.
+
+``ETHTOOL_A_LINKSTATE_EXT_STATE`` and ``ETHTOOL_A_LINKSTATE_EXT_SUBSTATE`` are
+optional values. ethtool core can provide either both
+``ETHTOOL_A_LINKSTATE_EXT_STATE`` and ``ETHTOOL_A_LINKSTATE_EXT_SUBSTATE``,
+or only ``ETHTOOL_A_LINKSTATE_EXT_STATE``, or none of them.
+
+``LINKSTATE_GET`` allows dump requests (kernel returns reply messages for all
+devices supporting the request).
+
+
+Link extended states:
+
+ ================================================ ============================================
+ ``ETHTOOL_LINK_EXT_STATE_AUTONEG`` States relating to the autonegotiation or
+ issues therein
+
+ ``ETHTOOL_LINK_EXT_STATE_LINK_TRAINING_FAILURE`` Failure during link training
+
+ ``ETHTOOL_LINK_EXT_STATE_LINK_LOGICAL_MISMATCH`` Logical mismatch in physical coding sublayer
+ or forward error correction sublayer
+
+ ``ETHTOOL_LINK_EXT_STATE_BAD_SIGNAL_INTEGRITY`` Signal integrity issues
+
+ ``ETHTOOL_LINK_EXT_STATE_NO_CABLE`` No cable connected
+
+ ``ETHTOOL_LINK_EXT_STATE_CABLE_ISSUE`` Failure is related to cable,
+ e.g., unsupported cable
+
+ ``ETHTOOL_LINK_EXT_STATE_EEPROM_ISSUE`` Failure is related to EEPROM, e.g., failure
+ during reading or parsing the data
+
+ ``ETHTOOL_LINK_EXT_STATE_CALIBRATION_FAILURE`` Failure during calibration algorithm
+
+ ``ETHTOOL_LINK_EXT_STATE_POWER_BUDGET_EXCEEDED`` The hardware is not able to provide the
+ power required from cable or module
+
+ ``ETHTOOL_LINK_EXT_STATE_OVERHEAT`` The module is overheated
+
+ ``ETHTOOL_LINK_EXT_STATE_MODULE`` Transceiver module issue
+ ================================================ ============================================
+
+Link extended substates:
+
+ Autoneg substates:
+
+ =============================================================== ================================
+ ``ETHTOOL_LINK_EXT_SUBSTATE_AN_NO_PARTNER_DETECTED`` Peer side is down
+
+ ``ETHTOOL_LINK_EXT_SUBSTATE_AN_ACK_NOT_RECEIVED`` Ack not received from peer side
+
+ ``ETHTOOL_LINK_EXT_SUBSTATE_AN_NEXT_PAGE_EXCHANGE_FAILED`` Next page exchange failed
+
+ ``ETHTOOL_LINK_EXT_SUBSTATE_AN_NO_PARTNER_DETECTED_FORCE_MODE`` Peer side is down during force
+ mode or there is no agreement of
+ speed
+
+ ``ETHTOOL_LINK_EXT_SUBSTATE_AN_FEC_MISMATCH_DURING_OVERRIDE`` Forward error correction modes
+ in both sides are mismatched
+
+ ``ETHTOOL_LINK_EXT_SUBSTATE_AN_NO_HCD`` No Highest Common Denominator
+ =============================================================== ================================
+
+ Link training substates:
+
+ =========================================================================== ====================
+ ``ETHTOOL_LINK_EXT_SUBSTATE_LT_KR_FRAME_LOCK_NOT_ACQUIRED`` Frames were not
+ recognized, the
+ lock failed
+
+ ``ETHTOOL_LINK_EXT_SUBSTATE_LT_KR_LINK_INHIBIT_TIMEOUT`` The lock did not
+ occur before
+ timeout
+
+ ``ETHTOOL_LINK_EXT_SUBSTATE_LT_KR_LINK_PARTNER_DID_NOT_SET_RECEIVER_READY`` Peer side did not
+ send ready signal
+ after training
+ process
+
+ ``ETHTOOL_LINK_EXT_SUBSTATE_LT_REMOTE_FAULT`` Remote side is not
+ ready yet
+ =========================================================================== ====================
+
+ Link logical mismatch substates:
+
+ ================================================================ ===============================
+ ``ETHTOOL_LINK_EXT_SUBSTATE_LLM_PCS_DID_NOT_ACQUIRE_BLOCK_LOCK`` Physical coding sublayer was
+ not locked in first phase -
+ block lock
+
+ ``ETHTOOL_LINK_EXT_SUBSTATE_LLM_PCS_DID_NOT_ACQUIRE_AM_LOCK`` Physical coding sublayer was
+ not locked in second phase -
+ alignment markers lock
+
+ ``ETHTOOL_LINK_EXT_SUBSTATE_LLM_PCS_DID_NOT_GET_ALIGN_STATUS`` Physical coding sublayer did
+ not get align status
+
+ ``ETHTOOL_LINK_EXT_SUBSTATE_LLM_FC_FEC_IS_NOT_LOCKED`` FC forward error correction is
+ not locked
+
+ ``ETHTOOL_LINK_EXT_SUBSTATE_LLM_RS_FEC_IS_NOT_LOCKED`` RS forward error correction is
+ not locked
+ ================================================================ ===============================
+
+ Bad signal integrity substates:
+
+ ================================================================= =============================
+ ``ETHTOOL_LINK_EXT_SUBSTATE_BSI_LARGE_NUMBER_OF_PHYSICAL_ERRORS`` Large number of physical
+ errors
+
+ ``ETHTOOL_LINK_EXT_SUBSTATE_BSI_UNSUPPORTED_RATE`` The system attempted to
+ operate the cable at a rate
+ that is not formally
+ supported, which led to
+ signal integrity issues
+
+ ``ETHTOOL_LINK_EXT_SUBSTATE_BSI_SERDES_REFERENCE_CLOCK_LOST`` The external clock signal for
+ SerDes is too weak or
+ unavailable.
+
+ ``ETHTOOL_LINK_EXT_SUBSTATE_BSI_SERDES_ALOS`` The received signal for
+ SerDes is too weak because
+ analog loss of signal.
+ ================================================================= =============================
+
+ Cable issue substates:
+
+ =================================================== ============================================
+ ``ETHTOOL_LINK_EXT_SUBSTATE_CI_UNSUPPORTED_CABLE`` Unsupported cable
+
+ ``ETHTOOL_LINK_EXT_SUBSTATE_CI_CABLE_TEST_FAILURE`` Cable test failure
+ =================================================== ============================================
+
+ Transceiver module issue substates:
+
+ =================================================== ============================================
+ ``ETHTOOL_LINK_EXT_SUBSTATE_MODULE_CMIS_NOT_READY`` The CMIS Module State Machine did not reach
+ the ModuleReady state. For example, if the
+ module is stuck at ModuleFault state
+ =================================================== ============================================
+
+DEBUG_GET
+=========
+
+Requests debugging settings of a device. At the moment, only message mask is
+provided.
+
+Request contents:
+
+ ==================================== ====== ==========================
+ ``ETHTOOL_A_DEBUG_HEADER`` nested request header
+ ==================================== ====== ==========================
+
+Kernel response contents:
+
+ ==================================== ====== ==========================
+ ``ETHTOOL_A_DEBUG_HEADER`` nested reply header
+ ``ETHTOOL_A_DEBUG_MSGMASK`` bitset message mask
+ ==================================== ====== ==========================
+
+The message mask (``ETHTOOL_A_DEBUG_MSGMASK``) is equal to message level as
+provided by ``ETHTOOL_GMSGLVL`` and set by ``ETHTOOL_SMSGLVL`` in ioctl
+interface. While it is called message level there for historical reasons, most
+drivers and almost all newer drivers use it as a mask of enabled message
+classes (represented by ``NETIF_MSG_*`` constants); therefore netlink
+interface follows its actual use in practice.
+
+``DEBUG_GET`` allows dump requests (kernel returns reply messages for all
+devices supporting the request).
+
+
+DEBUG_SET
+=========
+
+Set or update debugging settings of a device. At the moment, only message mask
+is supported.
+
+Request contents:
+
+ ==================================== ====== ==========================
+ ``ETHTOOL_A_DEBUG_HEADER`` nested request header
+ ``ETHTOOL_A_DEBUG_MSGMASK`` bitset message mask
+ ==================================== ====== ==========================
+
+``ETHTOOL_A_DEBUG_MSGMASK`` bit set allows setting or modifying mask of
+enabled debugging message types for the device.
+
+
+WOL_GET
+=======
+
+Query device wake-on-lan settings. Unlike most "GET" type requests,
+``ETHTOOL_MSG_WOL_GET`` requires (netns) ``CAP_NET_ADMIN`` privileges as it
+(potentially) provides SecureOn(tm) password which is confidential.
+
+Request contents:
+
+ ==================================== ====== ==========================
+ ``ETHTOOL_A_WOL_HEADER`` nested request header
+ ==================================== ====== ==========================
+
+Kernel response contents:
+
+ ==================================== ====== ==========================
+ ``ETHTOOL_A_WOL_HEADER`` nested reply header
+ ``ETHTOOL_A_WOL_MODES`` bitset mask of enabled WoL modes
+ ``ETHTOOL_A_WOL_SOPASS`` binary SecureOn(tm) password
+ ==================================== ====== ==========================
+
+In reply, ``ETHTOOL_A_WOL_MODES`` mask consists of modes supported by the
+device, value of modes which are enabled. ``ETHTOOL_A_WOL_SOPASS`` is only
+included in reply if ``WAKE_MAGICSECURE`` mode is supported.
+
+
+WOL_SET
+=======
+
+Set or update wake-on-lan settings.
+
+Request contents:
+
+ ==================================== ====== ==========================
+ ``ETHTOOL_A_WOL_HEADER`` nested request header
+ ``ETHTOOL_A_WOL_MODES`` bitset enabled WoL modes
+ ``ETHTOOL_A_WOL_SOPASS`` binary SecureOn(tm) password
+ ==================================== ====== ==========================
+
+``ETHTOOL_A_WOL_SOPASS`` is only allowed for devices supporting
+``WAKE_MAGICSECURE`` mode.
+
+
+FEATURES_GET
+============
+
+Gets netdev features like ``ETHTOOL_GFEATURES`` ioctl request.
+
+Request contents:
+
+ ==================================== ====== ==========================
+ ``ETHTOOL_A_FEATURES_HEADER`` nested request header
+ ==================================== ====== ==========================
+
+Kernel response contents:
+
+ ==================================== ====== ==========================
+ ``ETHTOOL_A_FEATURES_HEADER`` nested reply header
+ ``ETHTOOL_A_FEATURES_HW`` bitset dev->hw_features
+ ``ETHTOOL_A_FEATURES_WANTED`` bitset dev->wanted_features
+ ``ETHTOOL_A_FEATURES_ACTIVE`` bitset dev->features
+ ``ETHTOOL_A_FEATURES_NOCHANGE`` bitset NETIF_F_NEVER_CHANGE
+ ==================================== ====== ==========================
+
+Bitmaps in kernel response have the same meaning as bitmaps used in ioctl
+interference but attribute names are different (they are based on
+corresponding members of struct net_device). Legacy "flags" are not provided,
+if userspace needs them (most likely only ethtool for backward compatibility),
+it can calculate their values from related feature bits itself.
+ETHA_FEATURES_HW uses mask consisting of all features recognized by kernel (to
+provide all names when using verbose bitmap format), the other three use no
+mask (simple bit lists).
+
+
+FEATURES_SET
+============
+
+Request to set netdev features like ``ETHTOOL_SFEATURES`` ioctl request.
+
+Request contents:
+
+ ==================================== ====== ==========================
+ ``ETHTOOL_A_FEATURES_HEADER`` nested request header
+ ``ETHTOOL_A_FEATURES_WANTED`` bitset requested features
+ ==================================== ====== ==========================
+
+Kernel response contents:
+
+ ==================================== ====== ==========================
+ ``ETHTOOL_A_FEATURES_HEADER`` nested reply header
+ ``ETHTOOL_A_FEATURES_WANTED`` bitset diff wanted vs. result
+ ``ETHTOOL_A_FEATURES_ACTIVE`` bitset diff old vs. new active
+ ==================================== ====== ==========================
+
+Request constains only one bitset which can be either value/mask pair (request
+to change specific feature bits and leave the rest) or only a value (request
+to set all features to specified set).
+
+As request is subject to netdev_change_features() sanity checks, optional
+kernel reply (can be suppressed by ``ETHTOOL_FLAG_OMIT_REPLY`` flag in request
+header) informs client about the actual result. ``ETHTOOL_A_FEATURES_WANTED``
+reports the difference between client request and actual result: mask consists
+of bits which differ between requested features and result (dev->features
+after the operation), value consists of values of these bits in the request
+(i.e. negated values from resulting features). ``ETHTOOL_A_FEATURES_ACTIVE``
+reports the difference between old and new dev->features: mask consists of
+bits which have changed, values are their values in new dev->features (after
+the operation).
+
+``ETHTOOL_MSG_FEATURES_NTF`` notification is sent not only if device features
+are modified using ``ETHTOOL_MSG_FEATURES_SET`` request or on of ethtool ioctl
+request but also each time features are modified with netdev_update_features()
+or netdev_change_features().
+
+
+PRIVFLAGS_GET
+=============
+
+Gets private flags like ``ETHTOOL_GPFLAGS`` ioctl request.
+
+Request contents:
+
+ ==================================== ====== ==========================
+ ``ETHTOOL_A_PRIVFLAGS_HEADER`` nested request header
+ ==================================== ====== ==========================
+
+Kernel response contents:
+
+ ==================================== ====== ==========================
+ ``ETHTOOL_A_PRIVFLAGS_HEADER`` nested reply header
+ ``ETHTOOL_A_PRIVFLAGS_FLAGS`` bitset private flags
+ ==================================== ====== ==========================
+
+``ETHTOOL_A_PRIVFLAGS_FLAGS`` is a bitset with values of device private flags.
+These flags are defined by driver, their number and names (and also meaning)
+are device dependent. For compact bitset format, names can be retrieved as
+``ETH_SS_PRIV_FLAGS`` string set. If verbose bitset format is requested,
+response uses all private flags supported by the device as mask so that client
+gets the full information without having to fetch the string set with names.
+
+
+PRIVFLAGS_SET
+=============
+
+Sets or modifies values of device private flags like ``ETHTOOL_SPFLAGS``
+ioctl request.
+
+Request contents:
+
+ ==================================== ====== ==========================
+ ``ETHTOOL_A_PRIVFLAGS_HEADER`` nested request header
+ ``ETHTOOL_A_PRIVFLAGS_FLAGS`` bitset private flags
+ ==================================== ====== ==========================
+
+``ETHTOOL_A_PRIVFLAGS_FLAGS`` can either set the whole set of private flags or
+modify only values of some of them.
+
+
+RINGS_GET
+=========
+
+Gets ring sizes like ``ETHTOOL_GRINGPARAM`` ioctl request.
+
+Request contents:
+
+ ==================================== ====== ==========================
+ ``ETHTOOL_A_RINGS_HEADER`` nested request header
+ ==================================== ====== ==========================
+
+Kernel response contents:
+
+ ==================================== ====== ===========================
+ ``ETHTOOL_A_RINGS_HEADER`` nested reply header
+ ``ETHTOOL_A_RINGS_RX_MAX`` u32 max size of RX ring
+ ``ETHTOOL_A_RINGS_RX_MINI_MAX`` u32 max size of RX mini ring
+ ``ETHTOOL_A_RINGS_RX_JUMBO_MAX`` u32 max size of RX jumbo ring
+ ``ETHTOOL_A_RINGS_TX_MAX`` u32 max size of TX ring
+ ``ETHTOOL_A_RINGS_RX`` u32 size of RX ring
+ ``ETHTOOL_A_RINGS_RX_MINI`` u32 size of RX mini ring
+ ``ETHTOOL_A_RINGS_RX_JUMBO`` u32 size of RX jumbo ring
+ ``ETHTOOL_A_RINGS_TX`` u32 size of TX ring
+ ``ETHTOOL_A_RINGS_RX_BUF_LEN`` u32 size of buffers on the ring
+ ``ETHTOOL_A_RINGS_TCP_DATA_SPLIT`` u8 TCP header / data split
+ ``ETHTOOL_A_RINGS_CQE_SIZE`` u32 Size of TX/RX CQE
+ ``ETHTOOL_A_RINGS_TX_PUSH`` u8 flag of TX Push mode
+ ==================================== ====== ===========================
+
+``ETHTOOL_A_RINGS_TCP_DATA_SPLIT`` indicates whether the device is usable with
+page-flipping TCP zero-copy receive (``getsockopt(TCP_ZEROCOPY_RECEIVE)``).
+If enabled the device is configured to place frame headers and data into
+separate buffers. The device configuration must make it possible to receive
+full memory pages of data, for example because MTU is high enough or through
+HW-GRO.
+
+``ETHTOOL_A_RINGS_TX_PUSH`` flag is used to enable descriptor fast
+path to send packets. In ordinary path, driver fills descriptors in DRAM and
+notifies NIC hardware. In fast path, driver pushes descriptors to the device
+through MMIO writes, thus reducing the latency. However, enabling this feature
+may increase the CPU cost. Drivers may enforce additional per-packet
+eligibility checks (e.g. on packet size).
+
+RINGS_SET
+=========
+
+Sets ring sizes like ``ETHTOOL_SRINGPARAM`` ioctl request.
+
+Request contents:
+
+ ==================================== ====== ===========================
+ ``ETHTOOL_A_RINGS_HEADER`` nested reply header
+ ``ETHTOOL_A_RINGS_RX`` u32 size of RX ring
+ ``ETHTOOL_A_RINGS_RX_MINI`` u32 size of RX mini ring
+ ``ETHTOOL_A_RINGS_RX_JUMBO`` u32 size of RX jumbo ring
+ ``ETHTOOL_A_RINGS_TX`` u32 size of TX ring
+ ``ETHTOOL_A_RINGS_RX_BUF_LEN`` u32 size of buffers on the ring
+ ``ETHTOOL_A_RINGS_CQE_SIZE`` u32 Size of TX/RX CQE
+ ``ETHTOOL_A_RINGS_TX_PUSH`` u8 flag of TX Push mode
+ ==================================== ====== ===========================
+
+Kernel checks that requested ring sizes do not exceed limits reported by
+driver. Driver may impose additional constraints and may not suspport all
+attributes.
+
+
+``ETHTOOL_A_RINGS_CQE_SIZE`` specifies the completion queue event size.
+Completion queue events(CQE) are the events posted by NIC to indicate the
+completion status of a packet when the packet is sent(like send success or
+error) or received(like pointers to packet fragments). The CQE size parameter
+enables to modify the CQE size other than default size if NIC supports it.
+A bigger CQE can have more receive buffer pointers inturn NIC can transfer
+a bigger frame from wire. Based on the NIC hardware, the overall completion
+queue size can be adjusted in the driver if CQE size is modified.
+
+CHANNELS_GET
+============
+
+Gets channel counts like ``ETHTOOL_GCHANNELS`` ioctl request.
+
+Request contents:
+
+ ==================================== ====== ==========================
+ ``ETHTOOL_A_CHANNELS_HEADER`` nested request header
+ ==================================== ====== ==========================
+
+Kernel response contents:
+
+ ===================================== ====== ==========================
+ ``ETHTOOL_A_CHANNELS_HEADER`` nested reply header
+ ``ETHTOOL_A_CHANNELS_RX_MAX`` u32 max receive channels
+ ``ETHTOOL_A_CHANNELS_TX_MAX`` u32 max transmit channels
+ ``ETHTOOL_A_CHANNELS_OTHER_MAX`` u32 max other channels
+ ``ETHTOOL_A_CHANNELS_COMBINED_MAX`` u32 max combined channels
+ ``ETHTOOL_A_CHANNELS_RX_COUNT`` u32 receive channel count
+ ``ETHTOOL_A_CHANNELS_TX_COUNT`` u32 transmit channel count
+ ``ETHTOOL_A_CHANNELS_OTHER_COUNT`` u32 other channel count
+ ``ETHTOOL_A_CHANNELS_COMBINED_COUNT`` u32 combined channel count
+ ===================================== ====== ==========================
+
+
+CHANNELS_SET
+============
+
+Sets channel counts like ``ETHTOOL_SCHANNELS`` ioctl request.
+
+Request contents:
+
+ ===================================== ====== ==========================
+ ``ETHTOOL_A_CHANNELS_HEADER`` nested request header
+ ``ETHTOOL_A_CHANNELS_RX_COUNT`` u32 receive channel count
+ ``ETHTOOL_A_CHANNELS_TX_COUNT`` u32 transmit channel count
+ ``ETHTOOL_A_CHANNELS_OTHER_COUNT`` u32 other channel count
+ ``ETHTOOL_A_CHANNELS_COMBINED_COUNT`` u32 combined channel count
+ ===================================== ====== ==========================
+
+Kernel checks that requested channel counts do not exceed limits reported by
+driver. Driver may impose additional constraints and may not suspport all
+attributes.
+
+
+COALESCE_GET
+============
+
+Gets coalescing parameters like ``ETHTOOL_GCOALESCE`` ioctl request.
+
+Request contents:
+
+ ==================================== ====== ==========================
+ ``ETHTOOL_A_COALESCE_HEADER`` nested request header
+ ==================================== ====== ==========================
+
+Kernel response contents:
+
+ =========================================== ====== =======================
+ ``ETHTOOL_A_COALESCE_HEADER`` nested reply header
+ ``ETHTOOL_A_COALESCE_RX_USECS`` u32 delay (us), normal Rx
+ ``ETHTOOL_A_COALESCE_RX_MAX_FRAMES`` u32 max packets, normal Rx
+ ``ETHTOOL_A_COALESCE_RX_USECS_IRQ`` u32 delay (us), Rx in IRQ
+ ``ETHTOOL_A_COALESCE_RX_MAX_FRAMES_IRQ`` u32 max packets, Rx in IRQ
+ ``ETHTOOL_A_COALESCE_TX_USECS`` u32 delay (us), normal Tx
+ ``ETHTOOL_A_COALESCE_TX_MAX_FRAMES`` u32 max packets, normal Tx
+ ``ETHTOOL_A_COALESCE_TX_USECS_IRQ`` u32 delay (us), Tx in IRQ
+ ``ETHTOOL_A_COALESCE_TX_MAX_FRAMES_IRQ`` u32 IRQ packets, Tx in IRQ
+ ``ETHTOOL_A_COALESCE_STATS_BLOCK_USECS`` u32 delay of stats update
+ ``ETHTOOL_A_COALESCE_USE_ADAPTIVE_RX`` bool adaptive Rx coalesce
+ ``ETHTOOL_A_COALESCE_USE_ADAPTIVE_TX`` bool adaptive Tx coalesce
+ ``ETHTOOL_A_COALESCE_PKT_RATE_LOW`` u32 threshold for low rate
+ ``ETHTOOL_A_COALESCE_RX_USECS_LOW`` u32 delay (us), low Rx
+ ``ETHTOOL_A_COALESCE_RX_MAX_FRAMES_LOW`` u32 max packets, low Rx
+ ``ETHTOOL_A_COALESCE_TX_USECS_LOW`` u32 delay (us), low Tx
+ ``ETHTOOL_A_COALESCE_TX_MAX_FRAMES_LOW`` u32 max packets, low Tx
+ ``ETHTOOL_A_COALESCE_PKT_RATE_HIGH`` u32 threshold for high rate
+ ``ETHTOOL_A_COALESCE_RX_USECS_HIGH`` u32 delay (us), high Rx
+ ``ETHTOOL_A_COALESCE_RX_MAX_FRAMES_HIGH`` u32 max packets, high Rx
+ ``ETHTOOL_A_COALESCE_TX_USECS_HIGH`` u32 delay (us), high Tx
+ ``ETHTOOL_A_COALESCE_TX_MAX_FRAMES_HIGH`` u32 max packets, high Tx
+ ``ETHTOOL_A_COALESCE_RATE_SAMPLE_INTERVAL`` u32 rate sampling interval
+ ``ETHTOOL_A_COALESCE_USE_CQE_TX`` bool timer reset mode, Tx
+ ``ETHTOOL_A_COALESCE_USE_CQE_RX`` bool timer reset mode, Rx
+ =========================================== ====== =======================
+
+Attributes are only included in reply if their value is not zero or the
+corresponding bit in ``ethtool_ops::supported_coalesce_params`` is set (i.e.
+they are declared as supported by driver).
+
+Timer reset mode (``ETHTOOL_A_COALESCE_USE_CQE_TX`` and
+``ETHTOOL_A_COALESCE_USE_CQE_RX``) controls the interaction between packet
+arrival and the various time based delay parameters. By default timers are
+expected to limit the max delay between any packet arrival/departure and a
+corresponding interrupt. In this mode timer should be started by packet
+arrival (sometimes delivery of previous interrupt) and reset when interrupt
+is delivered.
+Setting the appropriate attribute to 1 will enable ``CQE`` mode, where
+each packet event resets the timer. In this mode timer is used to force
+the interrupt if queue goes idle, while busy queues depend on the packet
+limit to trigger interrupts.
+
+COALESCE_SET
+============
+
+Sets coalescing parameters like ``ETHTOOL_SCOALESCE`` ioctl request.
+
+Request contents:
+
+ =========================================== ====== =======================
+ ``ETHTOOL_A_COALESCE_HEADER`` nested request header
+ ``ETHTOOL_A_COALESCE_RX_USECS`` u32 delay (us), normal Rx
+ ``ETHTOOL_A_COALESCE_RX_MAX_FRAMES`` u32 max packets, normal Rx
+ ``ETHTOOL_A_COALESCE_RX_USECS_IRQ`` u32 delay (us), Rx in IRQ
+ ``ETHTOOL_A_COALESCE_RX_MAX_FRAMES_IRQ`` u32 max packets, Rx in IRQ
+ ``ETHTOOL_A_COALESCE_TX_USECS`` u32 delay (us), normal Tx
+ ``ETHTOOL_A_COALESCE_TX_MAX_FRAMES`` u32 max packets, normal Tx
+ ``ETHTOOL_A_COALESCE_TX_USECS_IRQ`` u32 delay (us), Tx in IRQ
+ ``ETHTOOL_A_COALESCE_TX_MAX_FRAMES_IRQ`` u32 IRQ packets, Tx in IRQ
+ ``ETHTOOL_A_COALESCE_STATS_BLOCK_USECS`` u32 delay of stats update
+ ``ETHTOOL_A_COALESCE_USE_ADAPTIVE_RX`` bool adaptive Rx coalesce
+ ``ETHTOOL_A_COALESCE_USE_ADAPTIVE_TX`` bool adaptive Tx coalesce
+ ``ETHTOOL_A_COALESCE_PKT_RATE_LOW`` u32 threshold for low rate
+ ``ETHTOOL_A_COALESCE_RX_USECS_LOW`` u32 delay (us), low Rx
+ ``ETHTOOL_A_COALESCE_RX_MAX_FRAMES_LOW`` u32 max packets, low Rx
+ ``ETHTOOL_A_COALESCE_TX_USECS_LOW`` u32 delay (us), low Tx
+ ``ETHTOOL_A_COALESCE_TX_MAX_FRAMES_LOW`` u32 max packets, low Tx
+ ``ETHTOOL_A_COALESCE_PKT_RATE_HIGH`` u32 threshold for high rate
+ ``ETHTOOL_A_COALESCE_RX_USECS_HIGH`` u32 delay (us), high Rx
+ ``ETHTOOL_A_COALESCE_RX_MAX_FRAMES_HIGH`` u32 max packets, high Rx
+ ``ETHTOOL_A_COALESCE_TX_USECS_HIGH`` u32 delay (us), high Tx
+ ``ETHTOOL_A_COALESCE_TX_MAX_FRAMES_HIGH`` u32 max packets, high Tx
+ ``ETHTOOL_A_COALESCE_RATE_SAMPLE_INTERVAL`` u32 rate sampling interval
+ ``ETHTOOL_A_COALESCE_USE_CQE_TX`` bool timer reset mode, Tx
+ ``ETHTOOL_A_COALESCE_USE_CQE_RX`` bool timer reset mode, Rx
+ =========================================== ====== =======================
+
+Request is rejected if it attributes declared as unsupported by driver (i.e.
+such that the corresponding bit in ``ethtool_ops::supported_coalesce_params``
+is not set), regardless of their values. Driver may impose additional
+constraints on coalescing parameters and their values.
+
+
+PAUSE_GET
+=========
+
+Gets pause frame settings like ``ETHTOOL_GPAUSEPARAM`` ioctl request.
+
+Request contents:
+
+ ===================================== ====== ==========================
+ ``ETHTOOL_A_PAUSE_HEADER`` nested request header
+ ===================================== ====== ==========================
+
+Kernel response contents:
+
+ ===================================== ====== ==========================
+ ``ETHTOOL_A_PAUSE_HEADER`` nested request header
+ ``ETHTOOL_A_PAUSE_AUTONEG`` bool pause autonegotiation
+ ``ETHTOOL_A_PAUSE_RX`` bool receive pause frames
+ ``ETHTOOL_A_PAUSE_TX`` bool transmit pause frames
+ ``ETHTOOL_A_PAUSE_STATS`` nested pause statistics
+ ===================================== ====== ==========================
+
+``ETHTOOL_A_PAUSE_STATS`` are reported if ``ETHTOOL_FLAG_STATS`` was set
+in ``ETHTOOL_A_HEADER_FLAGS``.
+It will be empty if driver did not report any statistics. Drivers fill in
+the statistics in the following structure:
+
+.. kernel-doc:: include/linux/ethtool.h
+ :identifiers: ethtool_pause_stats
+
+Each member has a corresponding attribute defined.
+
+PAUSE_SET
+=========
+
+Sets pause parameters like ``ETHTOOL_GPAUSEPARAM`` ioctl request.
+
+Request contents:
+
+ ===================================== ====== ==========================
+ ``ETHTOOL_A_PAUSE_HEADER`` nested request header
+ ``ETHTOOL_A_PAUSE_AUTONEG`` bool pause autonegotiation
+ ``ETHTOOL_A_PAUSE_RX`` bool receive pause frames
+ ``ETHTOOL_A_PAUSE_TX`` bool transmit pause frames
+ ===================================== ====== ==========================
+
+
+EEE_GET
+=======
+
+Gets Energy Efficient Ethernet settings like ``ETHTOOL_GEEE`` ioctl request.
+
+Request contents:
+
+ ===================================== ====== ==========================
+ ``ETHTOOL_A_EEE_HEADER`` nested request header
+ ===================================== ====== ==========================
+
+Kernel response contents:
+
+ ===================================== ====== ==========================
+ ``ETHTOOL_A_EEE_HEADER`` nested request header
+ ``ETHTOOL_A_EEE_MODES_OURS`` bool supported/advertised modes
+ ``ETHTOOL_A_EEE_MODES_PEER`` bool peer advertised link modes
+ ``ETHTOOL_A_EEE_ACTIVE`` bool EEE is actively used
+ ``ETHTOOL_A_EEE_ENABLED`` bool EEE is enabled
+ ``ETHTOOL_A_EEE_TX_LPI_ENABLED`` bool Tx lpi enabled
+ ``ETHTOOL_A_EEE_TX_LPI_TIMER`` u32 Tx lpi timeout (in us)
+ ===================================== ====== ==========================
+
+In ``ETHTOOL_A_EEE_MODES_OURS``, mask consists of link modes for which EEE is
+enabled, value of link modes for which EEE is advertised. Link modes for which
+peer advertises EEE are listed in ``ETHTOOL_A_EEE_MODES_PEER`` (no mask). The
+netlink interface allows reporting EEE status for all link modes but only
+first 32 are provided by the ``ethtool_ops`` callback.
+
+
+EEE_SET
+=======
+
+Sets Energy Efficient Ethernet parameters like ``ETHTOOL_SEEE`` ioctl request.
+
+Request contents:
+
+ ===================================== ====== ==========================
+ ``ETHTOOL_A_EEE_HEADER`` nested request header
+ ``ETHTOOL_A_EEE_MODES_OURS`` bool advertised modes
+ ``ETHTOOL_A_EEE_ENABLED`` bool EEE is enabled
+ ``ETHTOOL_A_EEE_TX_LPI_ENABLED`` bool Tx lpi enabled
+ ``ETHTOOL_A_EEE_TX_LPI_TIMER`` u32 Tx lpi timeout (in us)
+ ===================================== ====== ==========================
+
+``ETHTOOL_A_EEE_MODES_OURS`` is used to either list link modes to advertise
+EEE for (if there is no mask) or specify changes to the list (if there is
+a mask). The netlink interface allows reporting EEE status for all link modes
+but only first 32 can be set at the moment as that is what the ``ethtool_ops``
+callback supports.
+
+
+TSINFO_GET
+==========
+
+Gets timestamping information like ``ETHTOOL_GET_TS_INFO`` ioctl request.
+
+Request contents:
+
+ ===================================== ====== ==========================
+ ``ETHTOOL_A_TSINFO_HEADER`` nested request header
+ ===================================== ====== ==========================
+
+Kernel response contents:
+
+ ===================================== ====== ==========================
+ ``ETHTOOL_A_TSINFO_HEADER`` nested request header
+ ``ETHTOOL_A_TSINFO_TIMESTAMPING`` bitset SO_TIMESTAMPING flags
+ ``ETHTOOL_A_TSINFO_TX_TYPES`` bitset supported Tx types
+ ``ETHTOOL_A_TSINFO_RX_FILTERS`` bitset supported Rx filters
+ ``ETHTOOL_A_TSINFO_PHC_INDEX`` u32 PTP hw clock index
+ ===================================== ====== ==========================
+
+``ETHTOOL_A_TSINFO_PHC_INDEX`` is absent if there is no associated PHC (there
+is no special value for this case). The bitset attributes are omitted if they
+would be empty (no bit set).
+
+CABLE_TEST
+==========
+
+Start a cable test.
+
+Request contents:
+
+ ==================================== ====== ==========================
+ ``ETHTOOL_A_CABLE_TEST_HEADER`` nested request header
+ ==================================== ====== ==========================
+
+Notification contents:
+
+An Ethernet cable typically contains 1, 2 or 4 pairs. The length of
+the pair can only be measured when there is a fault in the pair and
+hence a reflection. Information about the fault may not be available,
+depending on the specific hardware. Hence the contents of the notify
+message are mostly optional. The attributes can be repeated an
+arbitrary number of times, in an arbitrary order, for an arbitrary
+number of pairs.
+
+The example shows the notification sent when the test is completed for
+a T2 cable, i.e. two pairs. One pair is OK and hence has no length
+information. The second pair has a fault and does have length
+information.
+
+ +---------------------------------------------+--------+---------------------+
+ | ``ETHTOOL_A_CABLE_TEST_HEADER`` | nested | reply header |
+ +---------------------------------------------+--------+---------------------+
+ | ``ETHTOOL_A_CABLE_TEST_STATUS`` | u8 | completed |
+ +---------------------------------------------+--------+---------------------+
+ | ``ETHTOOL_A_CABLE_TEST_NTF_NEST`` | nested | all the results |
+ +-+-------------------------------------------+--------+---------------------+
+ | | ``ETHTOOL_A_CABLE_NEST_RESULT`` | nested | cable test result |
+ +-+-+-----------------------------------------+--------+---------------------+
+ | | | ``ETHTOOL_A_CABLE_RESULTS_PAIR`` | u8 | pair number |
+ +-+-+-----------------------------------------+--------+---------------------+
+ | | | ``ETHTOOL_A_CABLE_RESULTS_CODE`` | u8 | result code |
+ +-+-+-----------------------------------------+--------+---------------------+
+ | | ``ETHTOOL_A_CABLE_NEST_RESULT`` | nested | cable test results |
+ +-+-+-----------------------------------------+--------+---------------------+
+ | | | ``ETHTOOL_A_CABLE_RESULTS_PAIR`` | u8 | pair number |
+ +-+-+-----------------------------------------+--------+---------------------+
+ | | | ``ETHTOOL_A_CABLE_RESULTS_CODE`` | u8 | result code |
+ +-+-+-----------------------------------------+--------+---------------------+
+ | | ``ETHTOOL_A_CABLE_NEST_FAULT_LENGTH`` | nested | cable length |
+ +-+-+-----------------------------------------+--------+---------------------+
+ | | | ``ETHTOOL_A_CABLE_FAULT_LENGTH_PAIR`` | u8 | pair number |
+ +-+-+-----------------------------------------+--------+---------------------+
+ | | | ``ETHTOOL_A_CABLE_FAULT_LENGTH_CM`` | u32 | length in cm |
+ +-+-+-----------------------------------------+--------+---------------------+
+
+CABLE_TEST TDR
+==============
+
+Start a cable test and report raw TDR data
+
+Request contents:
+
+ +--------------------------------------------+--------+-----------------------+
+ | ``ETHTOOL_A_CABLE_TEST_TDR_HEADER`` | nested | reply header |
+ +--------------------------------------------+--------+-----------------------+
+ | ``ETHTOOL_A_CABLE_TEST_TDR_CFG`` | nested | test configuration |
+ +-+------------------------------------------+--------+-----------------------+
+ | | ``ETHTOOL_A_CABLE_STEP_FIRST_DISTANCE`` | u32 | first data distance |
+ +-+-+----------------------------------------+--------+-----------------------+
+ | | ``ETHTOOL_A_CABLE_STEP_LAST_DISTANCE`` | u32 | last data distance |
+ +-+-+----------------------------------------+--------+-----------------------+
+ | | ``ETHTOOL_A_CABLE_STEP_STEP_DISTANCE`` | u32 | distance of each step |
+ +-+-+----------------------------------------+--------+-----------------------+
+ | | ``ETHTOOL_A_CABLE_TEST_TDR_CFG_PAIR`` | u8 | pair to test |
+ +-+-+----------------------------------------+--------+-----------------------+
+
+The ETHTOOL_A_CABLE_TEST_TDR_CFG is optional, as well as all members
+of the nest. All distances are expressed in centimeters. The PHY takes
+the distances as a guide, and rounds to the nearest distance it
+actually supports. If a pair is passed, only that one pair will be
+tested. Otherwise all pairs are tested.
+
+Notification contents:
+
+Raw TDR data is gathered by sending a pulse down the cable and
+recording the amplitude of the reflected pulse for a given distance.
+
+It can take a number of seconds to collect TDR data, especial if the
+full 100 meters is probed at 1 meter intervals. When the test is
+started a notification will be sent containing just
+ETHTOOL_A_CABLE_TEST_TDR_STATUS with the value
+ETHTOOL_A_CABLE_TEST_NTF_STATUS_STARTED.
+
+When the test has completed a second notification will be sent
+containing ETHTOOL_A_CABLE_TEST_TDR_STATUS with the value
+ETHTOOL_A_CABLE_TEST_NTF_STATUS_COMPLETED and the TDR data.
+
+The message may optionally contain the amplitude of the pulse send
+down the cable. This is measured in mV. A reflection should not be
+bigger than transmitted pulse.
+
+Before the raw TDR data should be an ETHTOOL_A_CABLE_TDR_NEST_STEP
+nest containing information about the distance along the cable for the
+first reading, the last reading, and the step between each
+reading. Distances are measured in centimeters. These should be the
+exact values the PHY used. These may be different to what the user
+requested, if the native measurement resolution is greater than 1 cm.
+
+For each step along the cable, a ETHTOOL_A_CABLE_TDR_NEST_AMPLITUDE is
+used to report the amplitude of the reflection for a given pair.
+
+ +---------------------------------------------+--------+----------------------+
+ | ``ETHTOOL_A_CABLE_TEST_TDR_HEADER`` | nested | reply header |
+ +---------------------------------------------+--------+----------------------+
+ | ``ETHTOOL_A_CABLE_TEST_TDR_STATUS`` | u8 | completed |
+ +---------------------------------------------+--------+----------------------+
+ | ``ETHTOOL_A_CABLE_TEST_TDR_NTF_NEST`` | nested | all the results |
+ +-+-------------------------------------------+--------+----------------------+
+ | | ``ETHTOOL_A_CABLE_TDR_NEST_PULSE`` | nested | TX Pulse amplitude |
+ +-+-+-----------------------------------------+--------+----------------------+
+ | | | ``ETHTOOL_A_CABLE_PULSE_mV`` | s16 | Pulse amplitude |
+ +-+-+-----------------------------------------+--------+----------------------+
+ | | ``ETHTOOL_A_CABLE_NEST_STEP`` | nested | TDR step info |
+ +-+-+-----------------------------------------+--------+----------------------+
+ | | | ``ETHTOOL_A_CABLE_STEP_FIRST_DISTANCE`` | u32 | First data distance |
+ +-+-+-----------------------------------------+--------+----------------------+
+ | | | ``ETHTOOL_A_CABLE_STEP_LAST_DISTANCE`` | u32 | Last data distance |
+ +-+-+-----------------------------------------+--------+----------------------+
+ | | | ``ETHTOOL_A_CABLE_STEP_STEP_DISTANCE`` | u32 | distance of each step|
+ +-+-+-----------------------------------------+--------+----------------------+
+ | | ``ETHTOOL_A_CABLE_TDR_NEST_AMPLITUDE`` | nested | Reflection amplitude |
+ +-+-+-----------------------------------------+--------+----------------------+
+ | | | ``ETHTOOL_A_CABLE_RESULTS_PAIR`` | u8 | pair number |
+ +-+-+-----------------------------------------+--------+----------------------+
+ | | | ``ETHTOOL_A_CABLE_AMPLITUDE_mV`` | s16 | Reflection amplitude |
+ +-+-+-----------------------------------------+--------+----------------------+
+ | | ``ETHTOOL_A_CABLE_TDR_NEST_AMPLITUDE`` | nested | Reflection amplitude |
+ +-+-+-----------------------------------------+--------+----------------------+
+ | | | ``ETHTOOL_A_CABLE_RESULTS_PAIR`` | u8 | pair number |
+ +-+-+-----------------------------------------+--------+----------------------+
+ | | | ``ETHTOOL_A_CABLE_AMPLITUDE_mV`` | s16 | Reflection amplitude |
+ +-+-+-----------------------------------------+--------+----------------------+
+ | | ``ETHTOOL_A_CABLE_TDR_NEST_AMPLITUDE`` | nested | Reflection amplitude |
+ +-+-+-----------------------------------------+--------+----------------------+
+ | | | ``ETHTOOL_A_CABLE_RESULTS_PAIR`` | u8 | pair number |
+ +-+-+-----------------------------------------+--------+----------------------+
+ | | | ``ETHTOOL_A_CABLE_AMPLITUDE_mV`` | s16 | Reflection amplitude |
+ +-+-+-----------------------------------------+--------+----------------------+
+
+TUNNEL_INFO
+===========
+
+Gets information about the tunnel state NIC is aware of.
+
+Request contents:
+
+ ===================================== ====== ==========================
+ ``ETHTOOL_A_TUNNEL_INFO_HEADER`` nested request header
+ ===================================== ====== ==========================
+
+Kernel response contents:
+
+ +---------------------------------------------+--------+---------------------+
+ | ``ETHTOOL_A_TUNNEL_INFO_HEADER`` | nested | reply header |
+ +---------------------------------------------+--------+---------------------+
+ | ``ETHTOOL_A_TUNNEL_INFO_UDP_PORTS`` | nested | all UDP port tables |
+ +-+-------------------------------------------+--------+---------------------+
+ | | ``ETHTOOL_A_TUNNEL_UDP_TABLE`` | nested | one UDP port table |
+ +-+-+-----------------------------------------+--------+---------------------+
+ | | | ``ETHTOOL_A_TUNNEL_UDP_TABLE_SIZE`` | u32 | max size of the |
+ | | | | | table |
+ +-+-+-----------------------------------------+--------+---------------------+
+ | | | ``ETHTOOL_A_TUNNEL_UDP_TABLE_TYPES`` | bitset | tunnel types which |
+ | | | | | table can hold |
+ +-+-+-----------------------------------------+--------+---------------------+
+ | | | ``ETHTOOL_A_TUNNEL_UDP_TABLE_ENTRY`` | nested | offloaded UDP port |
+ +-+-+-+---------------------------------------+--------+---------------------+
+ | | | | ``ETHTOOL_A_TUNNEL_UDP_ENTRY_PORT`` | be16 | UDP port |
+ +-+-+-+---------------------------------------+--------+---------------------+
+ | | | | ``ETHTOOL_A_TUNNEL_UDP_ENTRY_TYPE`` | u32 | tunnel type |
+ +-+-+-+---------------------------------------+--------+---------------------+
+
+For UDP tunnel table empty ``ETHTOOL_A_TUNNEL_UDP_TABLE_TYPES`` indicates that
+the table contains static entries, hard-coded by the NIC.
+
+FEC_GET
+=======
+
+Gets FEC configuration and state like ``ETHTOOL_GFECPARAM`` ioctl request.
+
+Request contents:
+
+ ===================================== ====== ==========================
+ ``ETHTOOL_A_FEC_HEADER`` nested request header
+ ===================================== ====== ==========================
+
+Kernel response contents:
+
+ ===================================== ====== ==========================
+ ``ETHTOOL_A_FEC_HEADER`` nested request header
+ ``ETHTOOL_A_FEC_MODES`` bitset configured modes
+ ``ETHTOOL_A_FEC_AUTO`` bool FEC mode auto selection
+ ``ETHTOOL_A_FEC_ACTIVE`` u32 index of active FEC mode
+ ``ETHTOOL_A_FEC_STATS`` nested FEC statistics
+ ===================================== ====== ==========================
+
+``ETHTOOL_A_FEC_ACTIVE`` is the bit index of the FEC link mode currently
+active on the interface. This attribute may not be present if device does
+not support FEC.
+
+``ETHTOOL_A_FEC_MODES`` and ``ETHTOOL_A_FEC_AUTO`` are only meaningful when
+autonegotiation is disabled. If ``ETHTOOL_A_FEC_AUTO`` is non-zero driver will
+select the FEC mode automatically based on the parameters of the SFP module.
+This is equivalent to the ``ETHTOOL_FEC_AUTO`` bit of the ioctl interface.
+``ETHTOOL_A_FEC_MODES`` carry the current FEC configuration using link mode
+bits (rather than old ``ETHTOOL_FEC_*`` bits).
+
+``ETHTOOL_A_FEC_STATS`` are reported if ``ETHTOOL_FLAG_STATS`` was set in
+``ETHTOOL_A_HEADER_FLAGS``.
+Each attribute carries an array of 64bit statistics. First entry in the array
+contains the total number of events on the port, while the following entries
+are counters corresponding to lanes/PCS instances. The number of entries in
+the array will be:
+
++--------------+---------------------------------------------+
+| `0` | device does not support FEC statistics |
++--------------+---------------------------------------------+
+| `1` | device does not support per-lane break down |
++--------------+---------------------------------------------+
+| `1 + #lanes` | device has full support for FEC stats |
++--------------+---------------------------------------------+
+
+Drivers fill in the statistics in the following structure:
+
+.. kernel-doc:: include/linux/ethtool.h
+ :identifiers: ethtool_fec_stats
+
+FEC_SET
+=======
+
+Sets FEC parameters like ``ETHTOOL_SFECPARAM`` ioctl request.
+
+Request contents:
+
+ ===================================== ====== ==========================
+ ``ETHTOOL_A_FEC_HEADER`` nested request header
+ ``ETHTOOL_A_FEC_MODES`` bitset configured modes
+ ``ETHTOOL_A_FEC_AUTO`` bool FEC mode auto selection
+ ===================================== ====== ==========================
+
+``FEC_SET`` is only meaningful when autonegotiation is disabled. Otherwise
+FEC mode is selected as part of autonegotiation.
+
+``ETHTOOL_A_FEC_MODES`` selects which FEC mode should be used. It's recommended
+to set only one bit, if multiple bits are set driver may choose between them
+in an implementation specific way.
+
+``ETHTOOL_A_FEC_AUTO`` requests the driver to choose FEC mode based on SFP
+module parameters. This does not mean autonegotiation.
+
+MODULE_EEPROM_GET
+=================
+
+Fetch module EEPROM data dump.
+This interface is designed to allow dumps of at most 1/2 page at once. This
+means only dumps of 128 (or less) bytes are allowed, without crossing half page
+boundary located at offset 128. For pages other than 0 only high 128 bytes are
+accessible.
+
+Request contents:
+
+ ======================================= ====== ==========================
+ ``ETHTOOL_A_MODULE_EEPROM_HEADER`` nested request header
+ ``ETHTOOL_A_MODULE_EEPROM_OFFSET`` u32 offset within a page
+ ``ETHTOOL_A_MODULE_EEPROM_LENGTH`` u32 amount of bytes to read
+ ``ETHTOOL_A_MODULE_EEPROM_PAGE`` u8 page number
+ ``ETHTOOL_A_MODULE_EEPROM_BANK`` u8 bank number
+ ``ETHTOOL_A_MODULE_EEPROM_I2C_ADDRESS`` u8 page I2C address
+ ======================================= ====== ==========================
+
+If ``ETHTOOL_A_MODULE_EEPROM_BANK`` is not specified, bank 0 is assumed.
+
+Kernel response contents:
+
+ +---------------------------------------------+--------+---------------------+
+ | ``ETHTOOL_A_MODULE_EEPROM_HEADER`` | nested | reply header |
+ +---------------------------------------------+--------+---------------------+
+ | ``ETHTOOL_A_MODULE_EEPROM_DATA`` | binary | array of bytes from |
+ | | | module EEPROM |
+ +---------------------------------------------+--------+---------------------+
+
+``ETHTOOL_A_MODULE_EEPROM_DATA`` has an attribute length equal to the amount of
+bytes driver actually read.
+
+STATS_GET
+=========
+
+Get standard statistics for the interface. Note that this is not
+a re-implementation of ``ETHTOOL_GSTATS`` which exposed driver-defined
+stats.
+
+Request contents:
+
+ ======================================= ====== ==========================
+ ``ETHTOOL_A_STATS_HEADER`` nested request header
+ ``ETHTOOL_A_STATS_GROUPS`` bitset requested groups of stats
+ ======================================= ====== ==========================
+
+Kernel response contents:
+
+ +-----------------------------------+--------+--------------------------------+
+ | ``ETHTOOL_A_STATS_HEADER`` | nested | reply header |
+ +-----------------------------------+--------+--------------------------------+
+ | ``ETHTOOL_A_STATS_GRP`` | nested | one or more group of stats |
+ +-+---------------------------------+--------+--------------------------------+
+ | | ``ETHTOOL_A_STATS_GRP_ID`` | u32 | group ID - ``ETHTOOL_STATS_*`` |
+ +-+---------------------------------+--------+--------------------------------+
+ | | ``ETHTOOL_A_STATS_GRP_SS_ID`` | u32 | string set ID for names |
+ +-+---------------------------------+--------+--------------------------------+
+ | | ``ETHTOOL_A_STATS_GRP_STAT`` | nested | nest containing a statistic |
+ +-+---------------------------------+--------+--------------------------------+
+ | | ``ETHTOOL_A_STATS_GRP_HIST_RX`` | nested | histogram statistic (Rx) |
+ +-+---------------------------------+--------+--------------------------------+
+ | | ``ETHTOOL_A_STATS_GRP_HIST_TX`` | nested | histogram statistic (Tx) |
+ +-+---------------------------------+--------+--------------------------------+
+
+Users specify which groups of statistics they are requesting via
+the ``ETHTOOL_A_STATS_GROUPS`` bitset. Currently defined values are:
+
+ ====================== ======== ===============================================
+ ETHTOOL_STATS_ETH_MAC eth-mac Basic IEEE 802.3 MAC statistics (30.3.1.1.*)
+ ETHTOOL_STATS_ETH_PHY eth-phy Basic IEEE 802.3 PHY statistics (30.3.2.1.*)
+ ETHTOOL_STATS_ETH_CTRL eth-ctrl Basic IEEE 802.3 MAC Ctrl statistics (30.3.3.*)
+ ETHTOOL_STATS_RMON rmon RMON (RFC 2819) statistics
+ ====================== ======== ===============================================
+
+Each group should have a corresponding ``ETHTOOL_A_STATS_GRP`` in the reply.
+``ETHTOOL_A_STATS_GRP_ID`` identifies which group's statistics nest contains.
+``ETHTOOL_A_STATS_GRP_SS_ID`` identifies the string set ID for the names of
+the statistics in the group, if available.
+
+Statistics are added to the ``ETHTOOL_A_STATS_GRP`` nest under
+``ETHTOOL_A_STATS_GRP_STAT``. ``ETHTOOL_A_STATS_GRP_STAT`` should contain
+single 8 byte (u64) attribute inside - the type of that attribute is
+the statistic ID and the value is the value of the statistic.
+Each group has its own interpretation of statistic IDs.
+Attribute IDs correspond to strings from the string set identified
+by ``ETHTOOL_A_STATS_GRP_SS_ID``. Complex statistics (such as RMON histogram
+entries) are also listed inside ``ETHTOOL_A_STATS_GRP`` and do not have
+a string defined in the string set.
+
+RMON "histogram" counters count number of packets within given size range.
+Because RFC does not specify the ranges beyond the standard 1518 MTU devices
+differ in definition of buckets. For this reason the definition of packet ranges
+is left to each driver.
+
+``ETHTOOL_A_STATS_GRP_HIST_RX`` and ``ETHTOOL_A_STATS_GRP_HIST_TX`` nests
+contain the following attributes:
+
+ ================================= ====== ===================================
+ ETHTOOL_A_STATS_RMON_HIST_BKT_LOW u32 low bound of the packet size bucket
+ ETHTOOL_A_STATS_RMON_HIST_BKT_HI u32 high bound of the bucket
+ ETHTOOL_A_STATS_RMON_HIST_VAL u64 packet counter
+ ================================= ====== ===================================
+
+Low and high bounds are inclusive, for example:
+
+ ============================= ==== ====
+ RFC statistic low high
+ ============================= ==== ====
+ etherStatsPkts64Octets 0 64
+ etherStatsPkts512to1023Octets 512 1023
+ ============================= ==== ====
+
+PHC_VCLOCKS_GET
+===============
+
+Query device PHC virtual clocks information.
+
+Request contents:
+
+ ==================================== ====== ==========================
+ ``ETHTOOL_A_PHC_VCLOCKS_HEADER`` nested request header
+ ==================================== ====== ==========================
+
+Kernel response contents:
+
+ ==================================== ====== ==========================
+ ``ETHTOOL_A_PHC_VCLOCKS_HEADER`` nested reply header
+ ``ETHTOOL_A_PHC_VCLOCKS_NUM`` u32 PHC virtual clocks number
+ ``ETHTOOL_A_PHC_VCLOCKS_INDEX`` s32 PHC index array
+ ==================================== ====== ==========================
+
+MODULE_GET
+==========
+
+Gets transceiver module parameters.
+
+Request contents:
+
+ ===================================== ====== ==========================
+ ``ETHTOOL_A_MODULE_HEADER`` nested request header
+ ===================================== ====== ==========================
+
+Kernel response contents:
+
+ ====================================== ====== ==========================
+ ``ETHTOOL_A_MODULE_HEADER`` nested reply header
+ ``ETHTOOL_A_MODULE_POWER_MODE_POLICY`` u8 power mode policy
+ ``ETHTOOL_A_MODULE_POWER_MODE`` u8 operational power mode
+ ====================================== ====== ==========================
+
+The optional ``ETHTOOL_A_MODULE_POWER_MODE_POLICY`` attribute encodes the
+transceiver module power mode policy enforced by the host. The default policy
+is driver-dependent, but "auto" is the recommended default and it should be
+implemented by new drivers and drivers where conformance to a legacy behavior
+is not critical.
+
+The optional ``ETHTHOOL_A_MODULE_POWER_MODE`` attribute encodes the operational
+power mode policy of the transceiver module. It is only reported when a module
+is plugged-in. Possible values are:
+
+.. kernel-doc:: include/uapi/linux/ethtool.h
+ :identifiers: ethtool_module_power_mode
+
+MODULE_SET
+==========
+
+Sets transceiver module parameters.
+
+Request contents:
+
+ ====================================== ====== ==========================
+ ``ETHTOOL_A_MODULE_HEADER`` nested request header
+ ``ETHTOOL_A_MODULE_POWER_MODE_POLICY`` u8 power mode policy
+ ====================================== ====== ==========================
+
+When set, the optional ``ETHTOOL_A_MODULE_POWER_MODE_POLICY`` attribute is used
+to set the transceiver module power policy enforced by the host. Possible
+values are:
+
+.. kernel-doc:: include/uapi/linux/ethtool.h
+ :identifiers: ethtool_module_power_mode_policy
+
+For SFF-8636 modules, low power mode is forced by the host according to table
+6-10 in revision 2.10a of the specification.
+
+For CMIS modules, low power mode is forced by the host according to table 6-12
+in revision 5.0 of the specification.
+
+PSE_GET
+=======
+
+Gets PSE attributes.
+
+Request contents:
+
+ ===================================== ====== ==========================
+ ``ETHTOOL_A_PSE_HEADER`` nested request header
+ ===================================== ====== ==========================
+
+Kernel response contents:
+
+ ====================================== ====== =============================
+ ``ETHTOOL_A_PSE_HEADER`` nested reply header
+ ``ETHTOOL_A_PODL_PSE_ADMIN_STATE`` u32 Operational state of the PoDL
+ PSE functions
+ ``ETHTOOL_A_PODL_PSE_PW_D_STATUS`` u32 power detection status of the
+ PoDL PSE.
+ ====================================== ====== =============================
+
+When set, the optional ``ETHTOOL_A_PODL_PSE_ADMIN_STATE`` attribute identifies
+the operational state of the PoDL PSE functions. The operational state of the
+PSE function can be changed using the ``ETHTOOL_A_PODL_PSE_ADMIN_CONTROL``
+action. This option is corresponding to ``IEEE 802.3-2018`` 30.15.1.1.2
+aPoDLPSEAdminState. Possible values are:
+
+.. kernel-doc:: include/uapi/linux/ethtool.h
+ :identifiers: ethtool_podl_pse_admin_state
+
+When set, the optional ``ETHTOOL_A_PODL_PSE_PW_D_STATUS`` attribute identifies
+the power detection status of the PoDL PSE. The status depend on internal PSE
+state machine and automatic PD classification support. This option is
+corresponding to ``IEEE 802.3-2018`` 30.15.1.1.3 aPoDLPSEPowerDetectionStatus.
+Possible values are:
+
+.. kernel-doc:: include/uapi/linux/ethtool.h
+ :identifiers: ethtool_podl_pse_pw_d_status
+
+PSE_SET
+=======
+
+Sets PSE parameters.
+
+Request contents:
+
+ ====================================== ====== =============================
+ ``ETHTOOL_A_PSE_HEADER`` nested request header
+ ``ETHTOOL_A_PODL_PSE_ADMIN_CONTROL`` u32 Control PoDL PSE Admin state
+ ====================================== ====== =============================
+
+When set, the optional ``ETHTOOL_A_PODL_PSE_ADMIN_CONTROL`` attribute is used
+to control PoDL PSE Admin functions. This option is implementing
+``IEEE 802.3-2018`` 30.15.1.2.1 acPoDLPSEAdminControl. See
+``ETHTOOL_A_PODL_PSE_ADMIN_STATE`` for supported values.
+
+Request translation
+===================
+
+The following table maps ioctl commands to netlink commands providing their
+functionality. Entries with "n/a" in right column are commands which do not
+have their netlink replacement yet. Entries which "n/a" in the left column
+are netlink only.
+
+ =================================== =====================================
+ ioctl command netlink command
+ =================================== =====================================
+ ``ETHTOOL_GSET`` ``ETHTOOL_MSG_LINKINFO_GET``
+ ``ETHTOOL_MSG_LINKMODES_GET``
+ ``ETHTOOL_SSET`` ``ETHTOOL_MSG_LINKINFO_SET``
+ ``ETHTOOL_MSG_LINKMODES_SET``
+ ``ETHTOOL_GDRVINFO`` n/a
+ ``ETHTOOL_GREGS`` n/a
+ ``ETHTOOL_GWOL`` ``ETHTOOL_MSG_WOL_GET``
+ ``ETHTOOL_SWOL`` ``ETHTOOL_MSG_WOL_SET``
+ ``ETHTOOL_GMSGLVL`` ``ETHTOOL_MSG_DEBUG_GET``
+ ``ETHTOOL_SMSGLVL`` ``ETHTOOL_MSG_DEBUG_SET``
+ ``ETHTOOL_NWAY_RST`` n/a
+ ``ETHTOOL_GLINK`` ``ETHTOOL_MSG_LINKSTATE_GET``
+ ``ETHTOOL_GEEPROM`` n/a
+ ``ETHTOOL_SEEPROM`` n/a
+ ``ETHTOOL_GCOALESCE`` ``ETHTOOL_MSG_COALESCE_GET``
+ ``ETHTOOL_SCOALESCE`` ``ETHTOOL_MSG_COALESCE_SET``
+ ``ETHTOOL_GRINGPARAM`` ``ETHTOOL_MSG_RINGS_GET``
+ ``ETHTOOL_SRINGPARAM`` ``ETHTOOL_MSG_RINGS_SET``
+ ``ETHTOOL_GPAUSEPARAM`` ``ETHTOOL_MSG_PAUSE_GET``
+ ``ETHTOOL_SPAUSEPARAM`` ``ETHTOOL_MSG_PAUSE_SET``
+ ``ETHTOOL_GRXCSUM`` ``ETHTOOL_MSG_FEATURES_GET``
+ ``ETHTOOL_SRXCSUM`` ``ETHTOOL_MSG_FEATURES_SET``
+ ``ETHTOOL_GTXCSUM`` ``ETHTOOL_MSG_FEATURES_GET``
+ ``ETHTOOL_STXCSUM`` ``ETHTOOL_MSG_FEATURES_SET``
+ ``ETHTOOL_GSG`` ``ETHTOOL_MSG_FEATURES_GET``
+ ``ETHTOOL_SSG`` ``ETHTOOL_MSG_FEATURES_SET``
+ ``ETHTOOL_TEST`` n/a
+ ``ETHTOOL_GSTRINGS`` ``ETHTOOL_MSG_STRSET_GET``
+ ``ETHTOOL_PHYS_ID`` n/a
+ ``ETHTOOL_GSTATS`` n/a
+ ``ETHTOOL_GTSO`` ``ETHTOOL_MSG_FEATURES_GET``
+ ``ETHTOOL_STSO`` ``ETHTOOL_MSG_FEATURES_SET``
+ ``ETHTOOL_GPERMADDR`` rtnetlink ``RTM_GETLINK``
+ ``ETHTOOL_GUFO`` ``ETHTOOL_MSG_FEATURES_GET``
+ ``ETHTOOL_SUFO`` ``ETHTOOL_MSG_FEATURES_SET``
+ ``ETHTOOL_GGSO`` ``ETHTOOL_MSG_FEATURES_GET``
+ ``ETHTOOL_SGSO`` ``ETHTOOL_MSG_FEATURES_SET``
+ ``ETHTOOL_GFLAGS`` ``ETHTOOL_MSG_FEATURES_GET``
+ ``ETHTOOL_SFLAGS`` ``ETHTOOL_MSG_FEATURES_SET``
+ ``ETHTOOL_GPFLAGS`` ``ETHTOOL_MSG_PRIVFLAGS_GET``
+ ``ETHTOOL_SPFLAGS`` ``ETHTOOL_MSG_PRIVFLAGS_SET``
+ ``ETHTOOL_GRXFH`` n/a
+ ``ETHTOOL_SRXFH`` n/a
+ ``ETHTOOL_GGRO`` ``ETHTOOL_MSG_FEATURES_GET``
+ ``ETHTOOL_SGRO`` ``ETHTOOL_MSG_FEATURES_SET``
+ ``ETHTOOL_GRXRINGS`` n/a
+ ``ETHTOOL_GRXCLSRLCNT`` n/a
+ ``ETHTOOL_GRXCLSRULE`` n/a
+ ``ETHTOOL_GRXCLSRLALL`` n/a
+ ``ETHTOOL_SRXCLSRLDEL`` n/a
+ ``ETHTOOL_SRXCLSRLINS`` n/a
+ ``ETHTOOL_FLASHDEV`` n/a
+ ``ETHTOOL_RESET`` n/a
+ ``ETHTOOL_SRXNTUPLE`` n/a
+ ``ETHTOOL_GRXNTUPLE`` n/a
+ ``ETHTOOL_GSSET_INFO`` ``ETHTOOL_MSG_STRSET_GET``
+ ``ETHTOOL_GRXFHINDIR`` n/a
+ ``ETHTOOL_SRXFHINDIR`` n/a
+ ``ETHTOOL_GFEATURES`` ``ETHTOOL_MSG_FEATURES_GET``
+ ``ETHTOOL_SFEATURES`` ``ETHTOOL_MSG_FEATURES_SET``
+ ``ETHTOOL_GCHANNELS`` ``ETHTOOL_MSG_CHANNELS_GET``
+ ``ETHTOOL_SCHANNELS`` ``ETHTOOL_MSG_CHANNELS_SET``
+ ``ETHTOOL_SET_DUMP`` n/a
+ ``ETHTOOL_GET_DUMP_FLAG`` n/a
+ ``ETHTOOL_GET_DUMP_DATA`` n/a
+ ``ETHTOOL_GET_TS_INFO`` ``ETHTOOL_MSG_TSINFO_GET``
+ ``ETHTOOL_GMODULEINFO`` ``ETHTOOL_MSG_MODULE_EEPROM_GET``
+ ``ETHTOOL_GMODULEEEPROM`` ``ETHTOOL_MSG_MODULE_EEPROM_GET``
+ ``ETHTOOL_GEEE`` ``ETHTOOL_MSG_EEE_GET``
+ ``ETHTOOL_SEEE`` ``ETHTOOL_MSG_EEE_SET``
+ ``ETHTOOL_GRSSH`` n/a
+ ``ETHTOOL_SRSSH`` n/a
+ ``ETHTOOL_GTUNABLE`` n/a
+ ``ETHTOOL_STUNABLE`` n/a
+ ``ETHTOOL_GPHYSTATS`` n/a
+ ``ETHTOOL_PERQUEUE`` n/a
+ ``ETHTOOL_GLINKSETTINGS`` ``ETHTOOL_MSG_LINKINFO_GET``
+ ``ETHTOOL_MSG_LINKMODES_GET``
+ ``ETHTOOL_SLINKSETTINGS`` ``ETHTOOL_MSG_LINKINFO_SET``
+ ``ETHTOOL_MSG_LINKMODES_SET``
+ ``ETHTOOL_PHY_GTUNABLE`` n/a
+ ``ETHTOOL_PHY_STUNABLE`` n/a
+ ``ETHTOOL_GFECPARAM`` ``ETHTOOL_MSG_FEC_GET``
+ ``ETHTOOL_SFECPARAM`` ``ETHTOOL_MSG_FEC_SET``
+ n/a ``ETHTOOL_MSG_CABLE_TEST_ACT``
+ n/a ``ETHTOOL_MSG_CABLE_TEST_TDR_ACT``
+ n/a ``ETHTOOL_MSG_TUNNEL_INFO_GET``
+ n/a ``ETHTOOL_MSG_PHC_VCLOCKS_GET``
+ n/a ``ETHTOOL_MSG_MODULE_GET``
+ n/a ``ETHTOOL_MSG_MODULE_SET``
+ =================================== =====================================