diff options
Diffstat (limited to 'arch/arm/boot/dts/am335x-moxa-uc-2101.dts')
| -rw-r--r-- | arch/arm/boot/dts/am335x-moxa-uc-2101.dts | 68 |
1 files changed, 68 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/am335x-moxa-uc-2101.dts b/arch/arm/boot/dts/am335x-moxa-uc-2101.dts new file mode 100644 index 000000000..1cc513ed9 --- /dev/null +++ b/arch/arm/boot/dts/am335x-moxa-uc-2101.dts @@ -0,0 +1,68 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2018 MOXA Inc. - https://www.moxa.com/ + * + * Authors: SZ Lin (林上智) <sz.lin@moxa.com> + * Wes Huang (黃淵河) <wes.huang@moxa.com> + * Fero JD Zhou (周俊達) <FeroJD.Zhou@moxa.com> + */ + +/dts-v1/; + +#include "am335x-moxa-uc-2100-common.dtsi" + +/ { + model = "Moxa UC-2101"; + compatible = "moxa,uc-2101", "ti,am33xx"; + + leds { + compatible = "gpio-leds"; + led1 { + label = "UC2100:GREEN:USER"; + gpios = <&gpio3 10 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + }; +}; + +&am33xx_pinmux { + pinctrl-names = "default"; + + cpsw_default: cpsw_default { + pinctrl-single,pins = < + /* Slave 1 */ + AM33XX_PADCONF(AM335X_PIN_MII1_CRS, PIN_INPUT_PULLDOWN, MUX_MODE1) /* mii1_crs.rmii1_crs_dv */ + AM33XX_PADCONF(AM335X_PIN_MII1_RX_ER, PIN_INPUT_PULLUP, MUX_MODE1) /* mii1_rxerr.rmii1_rxerr */ + AM33XX_PADCONF(AM335X_PIN_MII1_TX_EN, PIN_OUTPUT_PULLDOWN, MUX_MODE1) /* mii1_txen.rmii1_txen */ + AM33XX_PADCONF(AM335X_PIN_MII1_TXD1, PIN_OUTPUT_PULLDOWN, MUX_MODE1) /* mii1_txd1.rmii1_txd1 */ + AM33XX_PADCONF(AM335X_PIN_MII1_TXD0, PIN_OUTPUT_PULLDOWN, MUX_MODE1) /* mii1_txd0.rmii1_txd0 */ + AM33XX_PADCONF(AM335X_PIN_MII1_RXD1, PIN_INPUT_PULLUP, MUX_MODE1) /* mii1_rxd1.rmii1_rxd1 */ + AM33XX_PADCONF(AM335X_PIN_MII1_RXD0, PIN_INPUT_PULLUP, MUX_MODE1) /* mii1_rxd0.rmii1_rxd0 */ + AM33XX_PADCONF(AM335X_PIN_RMII1_REF_CLK, PIN_INPUT_PULLDOWN, MUX_MODE0) + >; + }; + + spi1_pins: pinmux_spi1 { + pinctrl-single,pins = < + AM33XX_PADCONF(AM335X_PIN_ECAP0_IN_PWM0_OUT, PIN_INPUT_PULLUP, MUX_MODE4) /* ecap0_in_pwm0_out.spi1_sclk */ + AM33XX_PADCONF(AM335X_PIN_UART1_CTSN, PIN_INPUT_PULLUP, MUX_MODE4) /* uart1_ctsn.spi1_cs0 */ + AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_INPUT_PULLUP, MUX_MODE4) /* uart0_ctsn.spi1_d0 */ + AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_INPUT_PULLUP, MUX_MODE4) /* uart0_rtsn.spi1_d1 */ + >; + }; +}; + +&davinci_mdio_sw { + phy0: ethernet-phy@4 { + reg = <4>; + }; +}; + +&cpsw_port1 { + phy-handle = <&phy0>; + phy-mode = "rmii"; +}; + +&cpsw_port2 { + status = "disabled"; +}; |