diff options
Diffstat (limited to '')
| -rw-r--r-- | arch/arm/boot/dts/am335x-netcan-plus-1xx.dts | 231 |
1 files changed, 231 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/am335x-netcan-plus-1xx.dts b/arch/arm/boot/dts/am335x-netcan-plus-1xx.dts new file mode 100644 index 000000000..2e049489a --- /dev/null +++ b/arch/arm/boot/dts/am335x-netcan-plus-1xx.dts @@ -0,0 +1,231 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/ + */ + +/* + * VScom OnRISC + * http://www.vscom.de + */ + +/dts-v1/; + +#include "am335x-baltos.dtsi" +#include "am335x-baltos-leds.dtsi" + +/ { + model = "NetCAN"; + + leds { + pinctrl-names = "default"; + pinctrl-0 = <&user_leds_s0>; + + compatible = "gpio-leds"; + + led@1 { + label = "can_data"; + linux,default-trigger = "netdev"; + gpios = <&gpio0 14 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + led@2 { + label = "can_error"; + gpios = <&gpio0 15 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + }; +}; + +&am33xx_pinmux { + user_leds_s0: user_leds_s0 { + pinctrl-single,pins = < + AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* CAN Data LED */ + AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE7) /* CAN Error LED */ + >; + }; + + dcan1_pins: pinmux_dcan1_pins { + pinctrl-single,pins = < + AM33XX_PADCONF(AM335X_PIN_UART0_CTSN, PIN_OUTPUT, MUX_MODE2) /* CAN TX */ + AM33XX_PADCONF(AM335X_PIN_UART0_RTSN, PIN_INPUT, MUX_MODE2) /* CAN RX */ + >; + }; +}; + +&usb0_phy { + status = "okay"; +}; + +&usb0 { + status = "okay"; + dr_mode = "host"; +}; + +&davinci_mdio_sw { + phy0: ethernet-phy@0 { + reg = <1>; + }; +}; + +&cpsw_port1 { + phy-mode = "rmii"; + ti,dual-emac-pvid = <1>; + phy-handle = <&phy0>; +}; + +&cpsw_port2 { + phy-mode = "rgmii-id"; + ti,dual-emac-pvid = <2>; + phy-handle = <&phy1>; +}; + +&dcan1 { + pinctrl-names = "default"; + pinctrl-0 = <&dcan1_pins>; + + status = "okay"; +}; + +&gpio0 { + gpio-line-names = + "MDIO", + "MDC", + "NC", + "NC", + "I2C1_SDA", + "I2C1_SCL", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "can_data", + "can_error", + "onrisc:blue:wlan", + "onrisc:green:app", + "USB0_DRVVBUS", + "ETH2_INT", + "NC", + "NC", + "MMC1_DAT0", + "MMC1_DAT1", + "NC", + "NC", + "MMC1_DAT2", + "MMC1_DAT3", + "NC", + "NC", + "GPMC_WAIT0", + "GPMC_WP_N"; +}; + +&gpio1 { + gpio-line-names = + "GPMC_AD0", + "GPMC_AD1", + "GPMC_AD2", + "GPMC_AD3", + "GPMC_AD4", + "GPMC_AD5", + "GPMC_AD6", + "GPMC_AD7", + "DCAN1_TX", + "DCAN1_RX", + "CONSOLE_RX", + "CONSOLE_TX", + "NC", + "NC", + "NC", + "NC", + "RGMII2_TCTL", + "RGMII2_RCTL", + "RGMII2_TD3", + "RGMII2_TD2", + "RGMII2_TD1", + "RGMII2_TD0", + "RGMII2_TCLK", + "RGMII2_RCLK", + "RGMII2_RD3", + "RGMII2_RD2", + "RGMII2_RD1", + "RGMII2_RD0", + "PMIC_INT1", + "GPMC_CSN0_Flash", + "MMC1_CLK", + "MMC1_CMD"; +}; + +&gpio2 { + gpio-line-names = + "GPMC_CSN3_BUS", + "GPMC_CLK", + "GPMC_ADVN_ALE", + "GPMC_OEN_RE_N", + "GPMC_WE_N", + "GPMC_BEN0_CLE", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "SW2_0", + "SW2_1", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "MMC0_DAT3", + "MMC0_DAT2", + "MMC0_DAT1", + "MMC0_DAT0", + "MMC0_CLK", + "MMC0_CMD"; +}; + +&gpio3 { + gpio-line-names = + "onrisc:red:power", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "WLAN_IRQ", + "WLAN_EN", + "SW2_2", + "SW2_3", + "NC", + "NC", + "NC", + "ModeA0", + "ModeA1", + "ModeA2", + "ModeA3", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "NC"; +}; |