diff options
Diffstat (limited to '')
| -rw-r--r-- | arch/arm/boot/dts/ste-href.dtsi | 314 |
1 files changed, 314 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/ste-href.dtsi b/arch/arm/boot/dts/ste-href.dtsi new file mode 100644 index 000000000..8f1bb78fc --- /dev/null +++ b/arch/arm/boot/dts/ste-href.dtsi @@ -0,0 +1,314 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright 2012 ST-Ericsson AB + */ + +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/leds/common.h> +#include "ste-href-family-pinctrl.dtsi" + +/ { + memory { + device_type = "memory"; + reg = <0x00000000 0x20000000>; + }; + + battery: battery { + compatible = "simple-battery"; + battery-type = "lithium-ion-polymer"; + }; + + thermal-zones { + battery-thermal { + /* This zone will be polled by the battery temperature code */ + polling-delay = <0>; + polling-delay-passive = <0>; + thermal-sensors = <&bat_therm>; + + trips { + battery-crit-hi { + temperature = <70000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + }; + + bat_therm: thermistor { + compatible = "murata,ncp18wb473"; + io-channels = <&gpadc 0x02>; /* BatTemp */ + pullup-uv = <1800000>; + pullup-ohm = <230000>; + pulldown-ohm = <0>; + #thermal-sensor-cells = <0>; + }; + + soc { + uart@80120000 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&u0_a_1_default>; + pinctrl-1 = <&u0_a_1_sleep>; + status = "okay"; + }; + + /* This UART is unused and thus left disabled */ + uart@80121000 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&u1rxtx_a_1_default>; + pinctrl-1 = <&u1rxtx_a_1_sleep>; + }; + + uart@80007000 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&u2rxtx_c_1_default>; + pinctrl-1 = <&u2rxtx_c_1_sleep>; + status = "okay"; + }; + + i2c@80004000 { + pinctrl-names = "default","sleep"; + pinctrl-0 = <&i2c0_a_1_default>; + pinctrl-1 = <&i2c0_a_1_sleep>; + status = "okay"; + }; + + i2c@80122000 { + pinctrl-names = "default","sleep"; + pinctrl-0 = <&i2c1_b_2_default>; + pinctrl-1 = <&i2c1_b_2_sleep>; + status = "okay"; + }; + + i2c@80128000 { + pinctrl-names = "default","sleep"; + pinctrl-0 = <&i2c2_b_2_default>; + pinctrl-1 = <&i2c2_b_2_sleep>; + status = "okay"; + lp5521@33 { + compatible = "national,lp5521"; + reg = <0x33>; + label = "lp5521_pri"; + clock-mode = /bits/ 8 <2>; + #address-cells = <1>; + #size-cells = <0>; + chan@0 { + reg = <0>; + led-cur = /bits/ 8 <0x2f>; + max-cur = /bits/ 8 <0x5f>; + color = <LED_COLOR_ID_BLUE>; + linux,default-trigger = "heartbeat"; + }; + chan@1 { + reg = <1>; + led-cur = /bits/ 8 <0x2f>; + max-cur = /bits/ 8 <0x5f>; + color = <LED_COLOR_ID_BLUE>; + }; + chan@2 { + reg = <2>; + led-cur = /bits/ 8 <0x2f>; + max-cur = /bits/ 8 <0x5f>; + color = <LED_COLOR_ID_BLUE>; + }; + }; + lp5521@34 { + compatible = "national,lp5521"; + reg = <0x34>; + label = "lp5521_sec"; + clock-mode = /bits/ 8 <2>; + #address-cells = <1>; + #size-cells = <0>; + chan@0 { + reg = <0>; + led-cur = /bits/ 8 <0x2f>; + max-cur = /bits/ 8 <0x5f>; + color = <LED_COLOR_ID_BLUE>; + }; + chan@1 { + reg = <1>; + led-cur = /bits/ 8 <0x2f>; + max-cur = /bits/ 8 <0x5f>; + color = <LED_COLOR_ID_BLUE>; + }; + chan@2 { + reg = <2>; + led-cur = /bits/ 8 <0x2f>; + max-cur = /bits/ 8 <0x5f>; + color = <LED_COLOR_ID_BLUE>; + }; + }; + bh1780@29 { + compatible = "rohm,bh1780gli"; + reg = <0x29>; + }; + }; + + i2c@80110000 { + pinctrl-names = "default","sleep"; + pinctrl-0 = <&i2c3_c_2_default>; + pinctrl-1 = <&i2c3_c_2_sleep>; + status = "okay"; + }; + + // External Micro SD slot + mmc@80126000 { + arm,primecell-periphid = <0x10480180>; + max-frequency = <100000000>; + bus-width = <4>; + cap-sd-highspeed; + cap-mmc-highspeed; + sd-uhs-sdr12; + sd-uhs-sdr25; + full-pwr-cycle; + st,sig-dir-dat0; + st,sig-dir-dat2; + st,sig-dir-cmd; + st,sig-pin-fbclk; + vmmc-supply = <&ab8500_ldo_aux3_reg>; + vqmmc-supply = <&vmmci>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&mc0_a_1_default &sdi0_default_mode>; + pinctrl-1 = <&mc0_a_1_sleep>; + + status = "okay"; + }; + + // WLAN SDIO channel + mmc@80118000 { + arm,primecell-periphid = <0x10480180>; + max-frequency = <100000000>; + bus-width = <4>; + non-removable; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&mc1_a_1_default>; + pinctrl-1 = <&mc1_a_1_sleep>; + + status = "okay"; + }; + + // PoP:ed eMMC + mmc@80005000 { + arm,primecell-periphid = <0x10480180>; + max-frequency = <100000000>; + bus-width = <8>; + cap-mmc-highspeed; + non-removable; + no-sdio; + no-sd; + vmmc-supply = <&db8500_vsmps2_reg>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&mc2_a_1_default>; + pinctrl-1 = <&mc2_a_1_sleep>; + + status = "okay"; + }; + + // On-board eMMC + mmc@80114000 { + arm,primecell-periphid = <0x10480180>; + max-frequency = <100000000>; + bus-width = <8>; + cap-mmc-highspeed; + non-removable; + no-sdio; + no-sd; + vmmc-supply = <&ab8500_ldo_aux2_reg>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&mc4_a_1_default>; + pinctrl-1 = <&mc4_a_1_sleep>; + + status = "okay"; + }; + + msp0: msp@80123000 { + pinctrl-names = "default"; + pinctrl-0 = <&msp0txrxtfstck_a_1_default>; + status = "okay"; + }; + + msp1: msp@80124000 { + pinctrl-names = "default"; + pinctrl-0 = <&msp1txrx_a_1_default>; + status = "okay"; + }; + + msp2: msp@80117000 { + pinctrl-names = "default"; + pinctrl-0 = <&msp2_a_1_default>; + }; + + msp3: msp@80125000 { + status = "okay"; + }; + + prcmu@80157000 { + ab8500 { + gpio { + }; + + phy { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&usb_a_1_default>; + pinctrl-1 = <&usb_a_1_sleep>; + }; + + regulator { + ab8500_ldo_aux1_reg: ab8500_ldo_aux1 { + regulator-name = "V-DISPLAY"; + }; + + ab8500_ldo_aux2_reg: ab8500_ldo_aux2 { + regulator-name = "V-eMMC1"; + }; + + ab8500_ldo_aux3_reg: ab8500_ldo_aux3 { + regulator-name = "V-MMC-SD"; + }; + + ab8500_ldo_intcore_reg: ab8500_ldo_intcore { + regulator-name = "V-INTCORE"; + }; + + ab8500_ldo_tvout_reg: ab8500_ldo_tvout { + regulator-name = "V-TVOUT"; + }; + + ab8500_ldo_audio_reg: ab8500_ldo_audio { + regulator-name = "V-AUD"; + }; + + ab8500_ldo_anamic1_reg: ab8500_ldo_anamic1 { + regulator-name = "V-AMIC1"; + }; + + ab8500_ldo_anamic2_reg: ab8500_ldo_anamic2 { + regulator-name = "V-AMIC2"; + }; + + ab8500_ldo_dmic_reg: ab8500_ldo_dmic { + regulator-name = "V-DMIC"; + }; + + ab8500_ldo_ana_reg: ab8500_ldo_ana { + regulator-name = "V-CSI/DSI"; + }; + }; + }; + }; + + pinctrl { + sdi0 { + sdi0_default_mode: sdi0_default { + /* Some boards set additional settings here */ + }; + }; + }; + + mcde@a0350000 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&lcd_default_mode>; + pinctrl-1 = <&lcd_sleep_mode>; + }; + }; +}; |