1 files changed, 132 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/tegra20-medcom-wide.dts b/arch/arm/boot/dts/tegra20-medcom-wide.dts
new file mode 100644
index 000000000..f144487c5
--- /dev/null
+++ b/arch/arm/boot/dts/tegra20-medcom-wide.dts
@@ -0,0 +1,132 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "tegra20-tamonten.dtsi"
+
+/ {
+	model = "Avionic Design Medcom-Wide board";
+	compatible = "ad,medcom-wide", "ad,tamonten", "nvidia,tegra20";
+
+	aliases {
+		serial0 = &uartd;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	pwm@7000a000 {
+		status = "okay";
+	};
+
+	host1x@50000000 {
+		dc@54200000 {
+			rgb {
+				status = "okay";
+				nvidia,panel = <&panel>;
+			};
+		};
+	};
+
+	i2c@7000c000 {
+		wm8903: wm8903@1a {
+			compatible = "wlf,wm8903";
+			reg = <0x1a>;
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(X, 3) IRQ_TYPE_LEVEL_HIGH>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			micdet-cfg = <0>;
+			micdet-delay = <100>;
+			gpio-cfg = <0xffffffff
+				    0xffffffff
+				    0
+				    0xffffffff
+				    0xffffffff>;
+		};
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 0 5000000>;
+
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+
+		/* close enough */
+		power-supply = <&vdd_3v3_reg>;
+	};
+
+	panel: panel {
+		compatible = "innolux,n156bge-l21";
+
+		power-supply =  <&vdd_1v8_reg>; // <&vdd_3v3_reg>;
+		enable-gpios = <&gpio TEGRA_GPIO(B, 2) GPIO_ACTIVE_HIGH>;
+
+		backlight = <&backlight>;
+	};
+
+	sound {
+		compatible = "ad,tegra-audio-wm8903-medcom-wide",
+			     "nvidia,tegra-audio-wm8903";
+		nvidia,model = "Avionic Design Medcom-Wide";
+
+		nvidia,audio-routing =
+			"Headphone Jack", "HPOUTR",
+			"Headphone Jack", "HPOUTL",
+			"Int Spk", "ROP",
+			"Int Spk", "RON",
+			"Int Spk", "LOP",
+			"Int Spk", "LON",
+			"Mic Jack", "MICBIAS",
+			"IN1L", "Mic Jack";
+
+		nvidia,i2s-controller = <&tegra_i2s1>;
+		nvidia,audio-codec = <&wm8903>;
+
+		nvidia,spkr-en-gpios = <&wm8903 2 GPIO_ACTIVE_HIGH>;
+		nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_LOW>;
+
+		clocks = <&tegra_car TEGRA20_CLK_PLL_A>,
+			 <&tegra_car TEGRA20_CLK_PLL_A_OUT0>,
+			 <&tegra_car TEGRA20_CLK_CDEV1>;
+		clock-names = "pll_a", "pll_a_out0", "mclk";
+	};
+
+	vcc_24v_reg: regulator-24v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_24v";
+		regulator-min-microvolt = <24000000>;
+		regulator-max-microvolt = <24000000>;
+		regulator-always-on;
+	};
+
+	vdd_5v0_reg: regulator-5v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_5v0";
+		vin-supply = <&vcc_24v_reg>;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	vdd_3v3_reg: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_3v3";
+		vin-supply = <&vcc_24v_reg>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	vdd_1v8_reg: regulator-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_1v8";
+		vin-supply = <&vdd_3v3_reg>;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+};