16 files changed, 4519 insertions, 0 deletions

diff --git a/arch/arm/common/Kconfig b/arch/arm/common/Kconfig
new file mode 100644
index 000000000..d2fdb1796
--- /dev/null
+++ b/arch/arm/common/Kconfig
@@ -0,0 +1,16 @@
+# SPDX-License-Identifier: GPL-2.0
+config SA1111
+	bool
+	select ZONE_DMA if ARCH_SA1100
+
+config KRAIT_L2_ACCESSORS
+	bool
+
+config SHARP_LOCOMO
+	bool
+
+config SHARP_PARAM
+	bool
+
+config SHARP_SCOOP
+	bool
diff --git a/arch/arm/common/Makefile b/arch/arm/common/Makefile
new file mode 100644
index 000000000..7bae8cbaa
--- /dev/null
+++ b/arch/arm/common/Makefile
@@ -0,0 +1,19 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Makefile for the linux kernel.
+#
+
+obj-y				+= firmware.o
+
+obj-$(CONFIG_SA1111)		+= sa1111.o
+obj-$(CONFIG_KRAIT_L2_ACCESSORS) += krait-l2-accessors.o
+obj-$(CONFIG_SHARP_LOCOMO)	+= locomo.o
+obj-$(CONFIG_SHARP_PARAM)	+= sharpsl_param.o
+obj-$(CONFIG_SHARP_SCOOP)	+= scoop.o
+obj-$(CONFIG_CPU_V7)		+= secure_cntvoff.o
+obj-$(CONFIG_MCPM)		+= mcpm_head.o mcpm_entry.o mcpm_platsmp.o vlock.o
+CFLAGS_REMOVE_mcpm_entry.o	= -pg
+AFLAGS_mcpm_head.o		:= -march=armv7-a
+AFLAGS_vlock.o			:= -march=armv7-a
+obj-$(CONFIG_BL_SWITCHER)	+= bL_switcher.o
+obj-$(CONFIG_BL_SWITCHER_DUMMY_IF) += bL_switcher_dummy_if.o
diff --git a/arch/arm/common/bL_switcher.c b/arch/arm/common/bL_switcher.c
new file mode 100644
index 000000000..9a9aa5354
--- /dev/null
+++ b/arch/arm/common/bL_switcher.c
@@ -0,0 +1,803 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * arch/arm/common/bL_switcher.c -- big.LITTLE cluster switcher core driver
+ *
+ * Created by:	Nicolas Pitre, March 2012
+ * Copyright:	(C) 2012-2013  Linaro Limited
+ */
+
+#include <linux/atomic.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/sched/signal.h>
+#include <uapi/linux/sched/types.h>
+#include <linux/interrupt.h>
+#include <linux/cpu_pm.h>
+#include <linux/cpu.h>
+#include <linux/cpumask.h>
+#include <linux/kthread.h>
+#include <linux/wait.h>
+#include <linux/time.h>
+#include <linux/clockchips.h>
+#include <linux/hrtimer.h>
+#include <linux/tick.h>
+#include <linux/notifier.h>
+#include <linux/mm.h>
+#include <linux/mutex.h>
+#include <linux/smp.h>
+#include <linux/spinlock.h>
+#include <linux/string.h>
+#include <linux/sysfs.h>
+#include <linux/irqchip/arm-gic.h>
+#include <linux/moduleparam.h>
+
+#include <asm/smp_plat.h>
+#include <asm/cputype.h>
+#include <asm/suspend.h>
+#include <asm/mcpm.h>
+#include <asm/bL_switcher.h>
+
+#define CREATE_TRACE_POINTS
+#include <trace/events/power_cpu_migrate.h>
+
+
+/*
+ * Use our own MPIDR accessors as the generic ones in asm/cputype.h have
+ * __attribute_const__ and we don't want the compiler to assume any
+ * constness here as the value _does_ change along some code paths.
+ */
+
+static int read_mpidr(void)
+{
+	unsigned int id;
+	asm volatile ("mrc p15, 0, %0, c0, c0, 5" : "=r" (id));
+	return id & MPIDR_HWID_BITMASK;
+}
+
+/*
+ * bL switcher core code.
+ */
+
+static void bL_do_switch(void *_arg)
+{
+	unsigned ib_mpidr, ib_cpu, ib_cluster;
+	long volatile handshake, **handshake_ptr = _arg;
+
+	pr_debug("%s\n", __func__);
+
+	ib_mpidr = cpu_logical_map(smp_processor_id());
+	ib_cpu = MPIDR_AFFINITY_LEVEL(ib_mpidr, 0);
+	ib_cluster = MPIDR_AFFINITY_LEVEL(ib_mpidr, 1);
+
+	/* Advertise our handshake location */
+	if (handshake_ptr) {
+		handshake = 0;
+		*handshake_ptr = &handshake;
+	} else
+		handshake = -1;
+
+	/*
+	 * Our state has been saved at this point.  Let's release our
+	 * inbound CPU.
+	 */
+	mcpm_set_entry_vector(ib_cpu, ib_cluster, cpu_resume);
+	sev();
+
+	/*
+	 * From this point, we must assume that our counterpart CPU might
+	 * have taken over in its parallel world already, as if execution
+	 * just returned from cpu_suspend().  It is therefore important to
+	 * be very careful not to make any change the other guy is not
+	 * expecting.  This is why we need stack isolation.
+	 *
+	 * Fancy under cover tasks could be performed here.  For now
+	 * we have none.
+	 */
+
+	/*
+	 * Let's wait until our inbound is alive.
+	 */
+	while (!handshake) {
+		wfe();
+		smp_mb();
+	}
+
+	/* Let's put ourself down. */
+	mcpm_cpu_power_down();
+
+	/* should never get here */
+	BUG();
+}
+
+/*
+ * Stack isolation.  To ensure 'current' remains valid, we just use another
+ * piece of our thread's stack space which should be fairly lightly used.
+ * The selected area starts just above the thread_info structure located
+ * at the very bottom of the stack, aligned to a cache line, and indexed
+ * with the cluster number.
+ */
+#define STACK_SIZE 512
+extern void call_with_stack(void (*fn)(void *), void *arg, void *sp);
+static int bL_switchpoint(unsigned long _arg)
+{
+	unsigned int mpidr = read_mpidr();
+	unsigned int clusterid = MPIDR_AFFINITY_LEVEL(mpidr, 1);
+	void *stack = current_thread_info() + 1;
+	stack = PTR_ALIGN(stack, L1_CACHE_BYTES);
+	stack += clusterid * STACK_SIZE + STACK_SIZE;
+	call_with_stack(bL_do_switch, (void *)_arg, stack);
+	BUG();
+}
+
+/*
+ * Generic switcher interface
+ */
+
+static unsigned int bL_gic_id[MAX_CPUS_PER_CLUSTER][MAX_NR_CLUSTERS];
+static int bL_switcher_cpu_pairing[NR_CPUS];
+
+/*
+ * bL_switch_to - Switch to a specific cluster for the current CPU
+ * @new_cluster_id: the ID of the cluster to switch to.
+ *
+ * This function must be called on the CPU to be switched.
+ * Returns 0 on success, else a negative status code.
+ */
+static int bL_switch_to(unsigned int new_cluster_id)
+{
+	unsigned int mpidr, this_cpu, that_cpu;
+	unsigned int ob_mpidr, ob_cpu, ob_cluster, ib_mpidr, ib_cpu, ib_cluster;
+	struct completion inbound_alive;
+	long volatile *handshake_ptr;
+	int ipi_nr, ret;
+
+	this_cpu = smp_processor_id();
+	ob_mpidr = read_mpidr();
+	ob_cpu = MPIDR_AFFINITY_LEVEL(ob_mpidr, 0);
+	ob_cluster = MPIDR_AFFINITY_LEVEL(ob_mpidr, 1);
+	BUG_ON(cpu_logical_map(this_cpu) != ob_mpidr);
+
+	if (new_cluster_id == ob_cluster)
+		return 0;
+
+	that_cpu = bL_switcher_cpu_pairing[this_cpu];
+	ib_mpidr = cpu_logical_map(that_cpu);
+	ib_cpu = MPIDR_AFFINITY_LEVEL(ib_mpidr, 0);
+	ib_cluster = MPIDR_AFFINITY_LEVEL(ib_mpidr, 1);
+
+	pr_debug("before switch: CPU %d MPIDR %#x -> %#x\n",
+		 this_cpu, ob_mpidr, ib_mpidr);
+
+	this_cpu = smp_processor_id();
+
+	/* Close the gate for our entry vectors */
+	mcpm_set_entry_vector(ob_cpu, ob_cluster, NULL);
+	mcpm_set_entry_vector(ib_cpu, ib_cluster, NULL);
+
+	/* Install our "inbound alive" notifier. */
+	init_completion(&inbound_alive);
+	ipi_nr = register_ipi_completion(&inbound_alive, this_cpu);
+	ipi_nr |= ((1 << 16) << bL_gic_id[ob_cpu][ob_cluster]);
+	mcpm_set_early_poke(ib_cpu, ib_cluster, gic_get_sgir_physaddr(), ipi_nr);
+
+	/*
+	 * Let's wake up the inbound CPU now in case it requires some delay
+	 * to come online, but leave it gated in our entry vector code.
+	 */
+	ret = mcpm_cpu_power_up(ib_cpu, ib_cluster);
+	if (ret) {
+		pr_err("%s: mcpm_cpu_power_up() returned %d\n", __func__, ret);
+		return ret;
+	}
+
+	/*
+	 * Raise a SGI on the inbound CPU to make sure it doesn't stall
+	 * in a possible WFI, such as in bL_power_down().
+	 */
+	gic_send_sgi(bL_gic_id[ib_cpu][ib_cluster], 0);
+
+	/*
+	 * Wait for the inbound to come up.  This allows for other
+	 * tasks to be scheduled in the mean time.
+	 */
+	wait_for_completion(&inbound_alive);
+	mcpm_set_early_poke(ib_cpu, ib_cluster, 0, 0);
+
+	/*
+	 * From this point we are entering the switch critical zone
+	 * and can't take any interrupts anymore.
+	 */
+	local_irq_disable();
+	local_fiq_disable();
+	trace_cpu_migrate_begin(ktime_get_real_ns(), ob_mpidr);
+
+	/* redirect GIC's SGIs to our counterpart */
+	gic_migrate_target(bL_gic_id[ib_cpu][ib_cluster]);
+
+	tick_suspend_local();
+
+	ret = cpu_pm_enter();
+
+	/* we can not tolerate errors at this point */
+	if (ret)
+		panic("%s: cpu_pm_enter() returned %d\n", __func__, ret);
+
+	/* Swap the physical CPUs in the logical map for this logical CPU. */
+	cpu_logical_map(this_cpu) = ib_mpidr;
+	cpu_logical_map(that_cpu) = ob_mpidr;
+
+	/* Let's do the actual CPU switch. */
+	ret = cpu_suspend((unsigned long)&handshake_ptr, bL_switchpoint);
+	if (ret > 0)
+		panic("%s: cpu_suspend() returned %d\n", __func__, ret);
+
+	/* We are executing on the inbound CPU at this point */
+	mpidr = read_mpidr();
+	pr_debug("after switch: CPU %d MPIDR %#x\n", this_cpu, mpidr);
+	BUG_ON(mpidr != ib_mpidr);
+
+	mcpm_cpu_powered_up();
+
+	ret = cpu_pm_exit();
+
+	tick_resume_local();
+
+	trace_cpu_migrate_finish(ktime_get_real_ns(), ib_mpidr);
+	local_fiq_enable();
+	local_irq_enable();
+
+	*handshake_ptr = 1;
+	dsb_sev();
+
+	if (ret)
+		pr_err("%s exiting with error %d\n", __func__, ret);
+	return ret;
+}
+
+struct bL_thread {
+	spinlock_t lock;
+	struct task_struct *task;
+	wait_queue_head_t wq;
+	int wanted_cluster;
+	struct completion started;
+	bL_switch_completion_handler completer;
+	void *completer_cookie;
+};
+
+static struct bL_thread bL_threads[NR_CPUS];
+
+static int bL_switcher_thread(void *arg)
+{
+	struct bL_thread *t = arg;
+	int cluster;
+	bL_switch_completion_handler completer;
+	void *completer_cookie;
+
+	sched_set_fifo_low(current);
+	complete(&t->started);
+
+	do {
+		if (signal_pending(current))
+			flush_signals(current);
+		wait_event_interruptible(t->wq,
+				t->wanted_cluster != -1 ||
+				kthread_should_stop());
+
+		spin_lock(&t->lock);
+		cluster = t->wanted_cluster;
+		completer = t->completer;
+		completer_cookie = t->completer_cookie;
+		t->wanted_cluster = -1;
+		t->completer = NULL;
+		spin_unlock(&t->lock);
+
+		if (cluster != -1) {
+			bL_switch_to(cluster);
+
+			if (completer)
+				completer(completer_cookie);
+		}
+	} while (!kthread_should_stop());
+
+	return 0;
+}
+
+static struct task_struct *bL_switcher_thread_create(int cpu, void *arg)
+{
+	struct task_struct *task;
+
+	task = kthread_create_on_node(bL_switcher_thread, arg,
+				      cpu_to_node(cpu), "kswitcher_%d", cpu);
+	if (!IS_ERR(task)) {
+		kthread_bind(task, cpu);
+		wake_up_process(task);
+	} else
+		pr_err("%s failed for CPU %d\n", __func__, cpu);
+	return task;
+}
+
+/*
+ * bL_switch_request_cb - Switch to a specific cluster for the given CPU,
+ *      with completion notification via a callback
+ *
+ * @cpu: the CPU to switch
+ * @new_cluster_id: the ID of the cluster to switch to.
+ * @completer: switch completion callback.  if non-NULL,
+ *	@completer(@completer_cookie) will be called on completion of
+ *	the switch, in non-atomic context.
+ * @completer_cookie: opaque context argument for @completer.
+ *
+ * This function causes a cluster switch on the given CPU by waking up
+ * the appropriate switcher thread.  This function may or may not return
+ * before the switch has occurred.
+ *
+ * If a @completer callback function is supplied, it will be called when
+ * the switch is complete.  This can be used to determine asynchronously
+ * when the switch is complete, regardless of when bL_switch_request()
+ * returns.  When @completer is supplied, no new switch request is permitted
+ * for the affected CPU until after the switch is complete, and @completer
+ * has returned.
+ */
+int bL_switch_request_cb(unsigned int cpu, unsigned int new_cluster_id,
+			 bL_switch_completion_handler completer,
+			 void *completer_cookie)
+{
+	struct bL_thread *t;
+
+	if (cpu >= ARRAY_SIZE(bL_threads)) {
+		pr_err("%s: cpu %d out of bounds\n", __func__, cpu);
+		return -EINVAL;
+	}
+
+	t = &bL_threads[cpu];
+
+	if (IS_ERR(t->task))
+		return PTR_ERR(t->task);
+	if (!t->task)
+		return -ESRCH;
+
+	spin_lock(&t->lock);
+	if (t->completer) {
+		spin_unlock(&t->lock);
+		return -EBUSY;
+	}
+	t->completer = completer;
+	t->completer_cookie = completer_cookie;
+	t->wanted_cluster = new_cluster_id;
+	spin_unlock(&t->lock);
+	wake_up(&t->wq);
+	return 0;
+}
+EXPORT_SYMBOL_GPL(bL_switch_request_cb);
+
+/*
+ * Activation and configuration code.
+ */
+
+static DEFINE_MUTEX(bL_switcher_activation_lock);
+static BLOCKING_NOTIFIER_HEAD(bL_activation_notifier);
+static unsigned int bL_switcher_active;
+static unsigned int bL_switcher_cpu_original_cluster[NR_CPUS];
+static cpumask_t bL_switcher_removed_logical_cpus;
+
+int bL_switcher_register_notifier(struct notifier_block *nb)
+{
+	return blocking_notifier_chain_register(&bL_activation_notifier, nb);
+}
+EXPORT_SYMBOL_GPL(bL_switcher_register_notifier);
+
+int bL_switcher_unregister_notifier(struct notifier_block *nb)
+{
+	return blocking_notifier_chain_unregister(&bL_activation_notifier, nb);
+}
+EXPORT_SYMBOL_GPL(bL_switcher_unregister_notifier);
+
+static int bL_activation_notify(unsigned long val)
+{
+	int ret;
+
+	ret = blocking_notifier_call_chain(&bL_activation_notifier, val, NULL);
+	if (ret & NOTIFY_STOP_MASK)
+		pr_err("%s: notifier chain failed with status 0x%x\n",
+			__func__, ret);
+	return notifier_to_errno(ret);
+}
+
+static void bL_switcher_restore_cpus(void)
+{
+	int i;
+
+	for_each_cpu(i, &bL_switcher_removed_logical_cpus) {
+		struct device *cpu_dev = get_cpu_device(i);
+		int ret = device_online(cpu_dev);
+		if (ret)
+			dev_err(cpu_dev, "switcher: unable to restore CPU\n");
+	}
+}
+
+static int bL_switcher_halve_cpus(void)
+{
+	int i, j, cluster_0, gic_id, ret;
+	unsigned int cpu, cluster, mask;
+	cpumask_t available_cpus;
+
+	/* First pass to validate what we have */
+	mask = 0;
+	for_each_online_cpu(i) {
+		cpu = MPIDR_AFFINITY_LEVEL(cpu_logical_map(i), 0);
+		cluster = MPIDR_AFFINITY_LEVEL(cpu_logical_map(i), 1);
+		if (cluster >= 2) {
+			pr_err("%s: only dual cluster systems are supported\n", __func__);
+			return -EINVAL;
+		}
+		if (WARN_ON(cpu >= MAX_CPUS_PER_CLUSTER))
+			return -EINVAL;
+		mask |= (1 << cluster);
+	}
+	if (mask != 3) {
+		pr_err("%s: no CPU pairing possible\n", __func__);
+		return -EINVAL;
+	}
+
+	/*
+	 * Now let's do the pairing.  We match each CPU with another CPU
+	 * from a different cluster.  To get a uniform scheduling behavior
+	 * without fiddling with CPU topology and compute capacity data,
+	 * we'll use logical CPUs initially belonging to the same cluster.
+	 */
+	memset(bL_switcher_cpu_pairing, -1, sizeof(bL_switcher_cpu_pairing));
+	cpumask_copy(&available_cpus, cpu_online_mask);
+	cluster_0 = -1;
+	for_each_cpu(i, &available_cpus) {
+		int match = -1;
+		cluster = MPIDR_AFFINITY_LEVEL(cpu_logical_map(i), 1);
+		if (cluster_0 == -1)
+			cluster_0 = cluster;
+		if (cluster != cluster_0)
+			continue;
+		cpumask_clear_cpu(i, &available_cpus);
+		for_each_cpu(j, &available_cpus) {
+			cluster = MPIDR_AFFINITY_LEVEL(cpu_logical_map(j), 1);
+			/*
+			 * Let's remember the last match to create "odd"
+			 * pairings on purpose in order for other code not
+			 * to assume any relation between physical and
+			 * logical CPU numbers.
+			 */
+			if (cluster != cluster_0)
+				match = j;
+		}
+		if (match != -1) {
+			bL_switcher_cpu_pairing[i] = match;
+			cpumask_clear_cpu(match, &available_cpus);
+			pr_info("CPU%d paired with CPU%d\n", i, match);
+		}
+	}
+
+	/*
+	 * Now we disable the unwanted CPUs i.e. everything that has no
+	 * pairing information (that includes the pairing counterparts).
+	 */
+	cpumask_clear(&bL_switcher_removed_logical_cpus);
+	for_each_online_cpu(i) {
+		cpu = MPIDR_AFFINITY_LEVEL(cpu_logical_map(i), 0);
+		cluster = MPIDR_AFFINITY_LEVEL(cpu_logical_map(i), 1);
+
+		/* Let's take note of the GIC ID for this CPU */
+		gic_id = gic_get_cpu_id(i);
+		if (gic_id < 0) {
+			pr_err("%s: bad GIC ID for CPU %d\n", __func__, i);
+			bL_switcher_restore_cpus();
+			return -EINVAL;
+		}
+		bL_gic_id[cpu][cluster] = gic_id;
+		pr_info("GIC ID for CPU %u cluster %u is %u\n",
+			cpu, cluster, gic_id);
+
+		if (bL_switcher_cpu_pairing[i] != -1) {
+			bL_switcher_cpu_original_cluster[i] = cluster;
+			continue;
+		}
+
+		ret = device_offline(get_cpu_device(i));
+		if (ret) {
+			bL_switcher_restore_cpus();
+			return ret;
+		}
+		cpumask_set_cpu(i, &bL_switcher_removed_logical_cpus);
+	}
+
+	return 0;
+}
+
+/* Determine the logical CPU a given physical CPU is grouped on. */
+int bL_switcher_get_logical_index(u32 mpidr)
+{
+	int cpu;
+
+	if (!bL_switcher_active)
+		return -EUNATCH;
+
+	mpidr &= MPIDR_HWID_BITMASK;
+	for_each_online_cpu(cpu) {
+		int pairing = bL_switcher_cpu_pairing[cpu];
+		if (pairing == -1)
+			continue;
+		if ((mpidr == cpu_logical_map(cpu)) ||
+		    (mpidr == cpu_logical_map(pairing)))
+			return cpu;
+	}
+	return -EINVAL;
+}
+
+static void bL_switcher_trace_trigger_cpu(void *__always_unused info)
+{
+	trace_cpu_migrate_current(ktime_get_real_ns(), read_mpidr());
+}
+
+int bL_switcher_trace_trigger(void)
+{
+	preempt_disable();
+
+	bL_switcher_trace_trigger_cpu(NULL);
+	smp_call_function(bL_switcher_trace_trigger_cpu, NULL, true);
+
+	preempt_enable();
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(bL_switcher_trace_trigger);
+
+static int bL_switcher_enable(void)
+{
+	int cpu, ret;
+
+	mutex_lock(&bL_switcher_activation_lock);
+	lock_device_hotplug();
+	if (bL_switcher_active) {
+		unlock_device_hotplug();
+		mutex_unlock(&bL_switcher_activation_lock);
+		return 0;
+	}
+
+	pr_info("big.LITTLE switcher initializing\n");
+
+	ret = bL_activation_notify(BL_NOTIFY_PRE_ENABLE);
+	if (ret)
+		goto error;
+
+	ret = bL_switcher_halve_cpus();
+	if (ret)
+		goto error;
+
+	bL_switcher_trace_trigger();
+
+	for_each_online_cpu(cpu) {
+		struct bL_thread *t = &bL_threads[cpu];
+		spin_lock_init(&t->lock);
+		init_waitqueue_head(&t->wq);
+		init_completion(&t->started);
+		t->wanted_cluster = -1;
+		t->task = bL_switcher_thread_create(cpu, t);
+	}
+
+	bL_switcher_active = 1;
+	bL_activation_notify(BL_NOTIFY_POST_ENABLE);
+	pr_info("big.LITTLE switcher initialized\n");
+	goto out;
+
+error:
+	pr_warn("big.LITTLE switcher initialization failed\n");
+	bL_activation_notify(BL_NOTIFY_POST_DISABLE);
+
+out:
+	unlock_device_hotplug();
+	mutex_unlock(&bL_switcher_activation_lock);
+	return ret;
+}
+
+#ifdef CONFIG_SYSFS
+
+static void bL_switcher_disable(void)
+{
+	unsigned int cpu, cluster;
+	struct bL_thread *t;
+	struct task_struct *task;
+
+	mutex_lock(&bL_switcher_activation_lock);
+	lock_device_hotplug();
+
+	if (!bL_switcher_active)
+		goto out;
+
+	if (bL_activation_notify(BL_NOTIFY_PRE_DISABLE) != 0) {
+		bL_activation_notify(BL_NOTIFY_POST_ENABLE);
+		goto out;
+	}
+
+	bL_switcher_active = 0;
+
+	/*
+	 * To deactivate the switcher, we must shut down the switcher
+	 * threads to prevent any other requests from being accepted.
+	 * Then, if the final cluster for given logical CPU is not the
+	 * same as the original one, we'll recreate a switcher thread
+	 * just for the purpose of switching the CPU back without any
+	 * possibility for interference from external requests.
+	 */
+	for_each_online_cpu(cpu) {
+		t = &bL_threads[cpu];
+		task = t->task;
+		t->task = NULL;
+		if (!task || IS_ERR(task))
+			continue;
+		kthread_stop(task);
+		/* no more switch may happen on this CPU at this point */
+		cluster = MPIDR_AFFINITY_LEVEL(cpu_logical_map(cpu), 1);
+		if (cluster == bL_switcher_cpu_original_cluster[cpu])
+			continue;
+		init_completion(&t->started);
+		t->wanted_cluster = bL_switcher_cpu_original_cluster[cpu];
+		task = bL_switcher_thread_create(cpu, t);
+		if (!IS_ERR(task)) {
+			wait_for_completion(&t->started);
+			kthread_stop(task);
+			cluster = MPIDR_AFFINITY_LEVEL(cpu_logical_map(cpu), 1);
+			if (cluster == bL_switcher_cpu_original_cluster[cpu])
+				continue;
+		}
+		/* If execution gets here, we're in trouble. */
+		pr_crit("%s: unable to restore original cluster for CPU %d\n",
+			__func__, cpu);
+		pr_crit("%s: CPU %d can't be restored\n",
+			__func__, bL_switcher_cpu_pairing[cpu]);
+		cpumask_clear_cpu(bL_switcher_cpu_pairing[cpu],
+				  &bL_switcher_removed_logical_cpus);
+	}
+
+	bL_switcher_restore_cpus();
+	bL_switcher_trace_trigger();
+
+	bL_activation_notify(BL_NOTIFY_POST_DISABLE);
+
+out:
+	unlock_device_hotplug();
+	mutex_unlock(&bL_switcher_activation_lock);
+}
+
+static ssize_t bL_switcher_active_show(struct kobject *kobj,
+		struct kobj_attribute *attr, char *buf)
+{
+	return sprintf(buf, "%u\n", bL_switcher_active);
+}
+
+static ssize_t bL_switcher_active_store(struct kobject *kobj,
+		struct kobj_attribute *attr, const char *buf, size_t count)
+{
+	int ret;
+
+	switch (buf[0]) {
+	case '0':
+		bL_switcher_disable();
+		ret = 0;
+		break;
+	case '1':
+		ret = bL_switcher_enable();
+		break;
+	default:
+		ret = -EINVAL;
+	}
+
+	return (ret >= 0) ? count : ret;
+}
+
+static ssize_t bL_switcher_trace_trigger_store(struct kobject *kobj,
+		struct kobj_attribute *attr, const char *buf, size_t count)
+{
+	int ret = bL_switcher_trace_trigger();
+
+	return ret ? ret : count;
+}
+
+static struct kobj_attribute bL_switcher_active_attr =
+	__ATTR(active, 0644, bL_switcher_active_show, bL_switcher_active_store);
+
+static struct kobj_attribute bL_switcher_trace_trigger_attr =
+	__ATTR(trace_trigger, 0200, NULL, bL_switcher_trace_trigger_store);
+
+static struct attribute *bL_switcher_attrs[] = {
+	&bL_switcher_active_attr.attr,
+	&bL_switcher_trace_trigger_attr.attr,
+	NULL,
+};
+
+static struct attribute_group bL_switcher_attr_group = {
+	.attrs = bL_switcher_attrs,
+};
+
+static struct kobject *bL_switcher_kobj;
+
+static int __init bL_switcher_sysfs_init(void)
+{
+	int ret;
+
+	bL_switcher_kobj = kobject_create_and_add("bL_switcher", kernel_kobj);
+	if (!bL_switcher_kobj)
+		return -ENOMEM;
+	ret = sysfs_create_group(bL_switcher_kobj, &bL_switcher_attr_group);
+	if (ret)
+		kobject_put(bL_switcher_kobj);
+	return ret;
+}
+
+#endif  /* CONFIG_SYSFS */
+
+bool bL_switcher_get_enabled(void)
+{
+	mutex_lock(&bL_switcher_activation_lock);
+
+	return bL_switcher_active;
+}
+EXPORT_SYMBOL_GPL(bL_switcher_get_enabled);
+
+void bL_switcher_put_enabled(void)
+{
+	mutex_unlock(&bL_switcher_activation_lock);
+}
+EXPORT_SYMBOL_GPL(bL_switcher_put_enabled);
+
+/*
+ * Veto any CPU hotplug operation on those CPUs we've removed
+ * while the switcher is active.
+ * We're just not ready to deal with that given the trickery involved.
+ */
+static int bL_switcher_cpu_pre(unsigned int cpu)
+{
+	int pairing;
+
+	if (!bL_switcher_active)
+		return 0;
+
+	pairing = bL_switcher_cpu_pairing[cpu];
+
+	if (pairing == -1)
+		return -EINVAL;
+	return 0;
+}
+
+static bool no_bL_switcher;
+core_param(no_bL_switcher, no_bL_switcher, bool, 0644);
+
+static int __init bL_switcher_init(void)
+{
+	int ret;
+
+	if (!mcpm_is_available())
+		return -ENODEV;
+
+	cpuhp_setup_state_nocalls(CPUHP_ARM_BL_PREPARE, "arm/bl:prepare",
+				  bL_switcher_cpu_pre, NULL);
+	ret = cpuhp_setup_state_nocalls(CPUHP_AP_ONLINE_DYN, "arm/bl:predown",
+					NULL, bL_switcher_cpu_pre);
+	if (ret < 0) {
+		cpuhp_remove_state_nocalls(CPUHP_ARM_BL_PREPARE);
+		pr_err("bL_switcher: Failed to allocate a hotplug state\n");
+		return ret;
+	}
+	if (!no_bL_switcher) {
+		ret = bL_switcher_enable();
+		if (ret)
+			return ret;
+	}
+
+#ifdef CONFIG_SYSFS
+	ret = bL_switcher_sysfs_init();
+	if (ret)
+		pr_err("%s: unable to create sysfs entry\n", __func__);
+#endif
+
+	return 0;
+}
+
+late_initcall(bL_switcher_init);
diff --git a/arch/arm/common/bL_switcher_dummy_if.c b/arch/arm/common/bL_switcher_dummy_if.c
new file mode 100644
index 000000000..cabc0659b
--- /dev/null
+++ b/arch/arm/common/bL_switcher_dummy_if.c
@@ -0,0 +1,60 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * arch/arm/common/bL_switcher_dummy_if.c -- b.L switcher dummy interface
+ *
+ * Created by:	Nicolas Pitre, November 2012
+ * Copyright:	(C) 2012-2013  Linaro Limited
+ *
+ * Dummy interface to user space for debugging purpose only.
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/fs.h>
+#include <linux/miscdevice.h>
+#include <linux/uaccess.h>
+#include <asm/bL_switcher.h>
+
+static ssize_t bL_switcher_write(struct file *file, const char __user *buf,
+			size_t len, loff_t *pos)
+{
+	unsigned char val[3];
+	unsigned int cpu, cluster;
+	int ret;
+
+	pr_debug("%s\n", __func__);
+
+	if (len < 3)
+		return -EINVAL;
+
+	if (copy_from_user(val, buf, 3))
+		return -EFAULT;
+
+	/* format: <cpu#>,<cluster#> */
+	if (val[0] < '0' || val[0] > '9' ||
+	    val[1] != ',' ||
+	    val[2] < '0' || val[2] > '1')
+		return -EINVAL;
+
+	cpu = val[0] - '0';
+	cluster = val[2] - '0';
+	ret = bL_switch_request(cpu, cluster);
+
+	return ret ? : len;
+}
+
+static const struct file_operations bL_switcher_fops = {
+	.write		= bL_switcher_write,
+	.owner	= THIS_MODULE,
+};
+
+static struct miscdevice bL_switcher_device = {
+	MISC_DYNAMIC_MINOR,
+	"b.L_switcher",
+	&bL_switcher_fops
+};
+module_misc_device(bL_switcher_device);
+
+MODULE_AUTHOR("Nicolas Pitre <nico@linaro.org>");
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("big.LITTLE switcher dummy user interface");
diff --git a/arch/arm/common/firmware.c b/arch/arm/common/firmware.c
new file mode 100644
index 000000000..c1f8f581b
--- /dev/null
+++ b/arch/arm/common/firmware.c
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2012 Samsung Electronics.
+ * Kyungmin Park <kyungmin.park@samsung.com>
+ * Tomasz Figa <t.figa@samsung.com>
+ */
+
+#include <linux/kernel.h>
+#include <linux/suspend.h>
+
+#include <asm/firmware.h>
+
+static const struct firmware_ops default_firmware_ops;
+
+const struct firmware_ops *firmware_ops = &default_firmware_ops;
diff --git a/arch/arm/common/krait-l2-accessors.c b/arch/arm/common/krait-l2-accessors.c
new file mode 100644
index 000000000..9a97ddade
--- /dev/null
+++ b/arch/arm/common/krait-l2-accessors.c
@@ -0,0 +1,48 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2018, The Linux Foundation. All rights reserved.
+
+#include <linux/spinlock.h>
+#include <linux/export.h>
+
+#include <asm/barrier.h>
+#include <asm/krait-l2-accessors.h>
+
+static DEFINE_RAW_SPINLOCK(krait_l2_lock);
+
+void krait_set_l2_indirect_reg(u32 addr, u32 val)
+{
+	unsigned long flags;
+
+	raw_spin_lock_irqsave(&krait_l2_lock, flags);
+	/*
+	 * Select the L2 window by poking l2cpselr, then write to the window
+	 * via l2cpdr.
+	 */
+	asm volatile ("mcr p15, 3, %0, c15, c0, 6 @ l2cpselr" : : "r" (addr));
+	isb();
+	asm volatile ("mcr p15, 3, %0, c15, c0, 7 @ l2cpdr" : : "r" (val));
+	isb();
+
+	raw_spin_unlock_irqrestore(&krait_l2_lock, flags);
+}
+EXPORT_SYMBOL(krait_set_l2_indirect_reg);
+
+u32 krait_get_l2_indirect_reg(u32 addr)
+{
+	u32 val;
+	unsigned long flags;
+
+	raw_spin_lock_irqsave(&krait_l2_lock, flags);
+	/*
+	 * Select the L2 window by poking l2cpselr, then read from the window
+	 * via l2cpdr.
+	 */
+	asm volatile ("mcr p15, 3, %0, c15, c0, 6 @ l2cpselr" : : "r" (addr));
+	isb();
+	asm volatile ("mrc p15, 3, %0, c15, c0, 7 @ l2cpdr" : "=r" (val));
+
+	raw_spin_unlock_irqrestore(&krait_l2_lock, flags);
+
+	return val;
+}
+EXPORT_SYMBOL(krait_get_l2_indirect_reg);
diff --git a/arch/arm/common/locomo.c b/arch/arm/common/locomo.c
new file mode 100644
index 000000000..da30a4d4f
--- /dev/null
+++ b/arch/arm/common/locomo.c
@@ -0,0 +1,884 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * linux/arch/arm/common/locomo.c
+ *
+ * Sharp LoCoMo support
+ *
+ * This file contains all generic LoCoMo support.
+ *
+ * All initialization functions provided here are intended to be called
+ * from machine specific code with proper arguments when required.
+ *
+ * Based on sa1111.c
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/ioport.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/io.h>
+
+#include <asm/irq.h>
+#include <asm/mach/irq.h>
+
+#include <asm/hardware/locomo.h>
+
+/* LoCoMo Interrupts */
+#define IRQ_LOCOMO_KEY		(0)
+#define IRQ_LOCOMO_GPIO		(1)
+#define IRQ_LOCOMO_LT		(2)
+#define IRQ_LOCOMO_SPI		(3)
+
+/* M62332 output channel selection */
+#define M62332_EVR_CH	1	/* M62332 volume channel number  */
+				/*   0 : CH.1 , 1 : CH. 2        */
+/* DAC send data */
+#define	M62332_SLAVE_ADDR	0x4e	/* Slave address  */
+#define	M62332_W_BIT		0x00	/* W bit (0 only) */
+#define	M62332_SUB_ADDR		0x00	/* Sub address    */
+#define	M62332_A_BIT		0x00	/* A bit (0 only) */
+
+/* DAC setup and hold times (expressed in us) */
+#define DAC_BUS_FREE_TIME	5	/*   4.7 us */
+#define DAC_START_SETUP_TIME	5	/*   4.7 us */
+#define DAC_STOP_SETUP_TIME	4	/*   4.0 us */
+#define DAC_START_HOLD_TIME	5	/*   4.7 us */
+#define DAC_SCL_LOW_HOLD_TIME	5	/*   4.7 us */
+#define DAC_SCL_HIGH_HOLD_TIME	4	/*   4.0 us */
+#define DAC_DATA_SETUP_TIME	1	/*   250 ns */
+#define DAC_DATA_HOLD_TIME	1	/*   300 ns */
+#define DAC_LOW_SETUP_TIME	1	/*   300 ns */
+#define DAC_HIGH_SETUP_TIME	1	/*  1000 ns */
+
+/* the following is the overall data for the locomo chip */
+struct locomo {
+	struct device *dev;
+	unsigned long phys;
+	unsigned int irq;
+	int irq_base;
+	spinlock_t lock;
+	void __iomem *base;
+#ifdef CONFIG_PM
+	void *saved_state;
+#endif
+};
+
+struct locomo_dev_info {
+	unsigned long	offset;
+	unsigned long	length;
+	unsigned int	devid;
+	unsigned int	irq[1];
+	const char *	name;
+};
+
+/* All the locomo devices.  If offset is non-zero, the mapbase for the
+ * locomo_dev will be set to the chip base plus offset.  If offset is
+ * zero, then the mapbase for the locomo_dev will be set to zero.  An
+ * offset of zero means the device only uses GPIOs or other helper
+ * functions inside this file */
+static struct locomo_dev_info locomo_devices[] = {
+	{
+		.devid 		= LOCOMO_DEVID_KEYBOARD,
+		.irq		= { IRQ_LOCOMO_KEY },
+		.name		= "locomo-keyboard",
+		.offset		= LOCOMO_KEYBOARD,
+		.length		= 16,
+	},
+	{
+		.devid		= LOCOMO_DEVID_FRONTLIGHT,
+		.irq		= {},
+		.name		= "locomo-frontlight",
+		.offset		= LOCOMO_FRONTLIGHT,
+		.length		= 8,
+
+	},
+	{
+		.devid		= LOCOMO_DEVID_BACKLIGHT,
+		.irq		= {},
+		.name		= "locomo-backlight",
+		.offset		= LOCOMO_BACKLIGHT,
+		.length		= 8,
+	},
+	{
+		.devid		= LOCOMO_DEVID_AUDIO,
+		.irq		= {},
+		.name		= "locomo-audio",
+		.offset		= LOCOMO_AUDIO,
+		.length		= 4,
+	},
+	{
+		.devid		= LOCOMO_DEVID_LED,
+		.irq 		= {},
+		.name		= "locomo-led",
+		.offset		= LOCOMO_LED,
+		.length		= 8,
+	},
+	{
+		.devid		= LOCOMO_DEVID_UART,
+		.irq		= {},
+		.name		= "locomo-uart",
+		.offset		= 0,
+		.length		= 0,
+	},
+	{
+		.devid		= LOCOMO_DEVID_SPI,
+		.irq		= {},
+		.name		= "locomo-spi",
+		.offset		= LOCOMO_SPI,
+		.length		= 0x30,
+	},
+};
+
+static void locomo_handler(struct irq_desc *desc)
+{
+	struct locomo *lchip = irq_desc_get_handler_data(desc);
+	int req, i;
+
+	/* Acknowledge the parent IRQ */
+	desc->irq_data.chip->irq_ack(&desc->irq_data);
+
+	/* check why this interrupt was generated */
+	req = locomo_readl(lchip->base + LOCOMO_ICR) & 0x0f00;
+
+	if (req) {
+		unsigned int irq;
+
+		/* generate the next interrupt(s) */
+		irq = lchip->irq_base;
+		for (i = 0; i <= 3; i++, irq++) {
+			if (req & (0x0100 << i)) {
+				generic_handle_irq(irq);
+			}
+
+		}
+	}
+}
+
+static void locomo_ack_irq(struct irq_data *d)
+{
+}
+
+static void locomo_mask_irq(struct irq_data *d)
+{
+	struct locomo *lchip = irq_data_get_irq_chip_data(d);
+	unsigned int r;
+	r = locomo_readl(lchip->base + LOCOMO_ICR);
+	r &= ~(0x0010 << (d->irq - lchip->irq_base));
+	locomo_writel(r, lchip->base + LOCOMO_ICR);
+}
+
+static void locomo_unmask_irq(struct irq_data *d)
+{
+	struct locomo *lchip = irq_data_get_irq_chip_data(d);
+	unsigned int r;
+	r = locomo_readl(lchip->base + LOCOMO_ICR);
+	r |= (0x0010 << (d->irq - lchip->irq_base));
+	locomo_writel(r, lchip->base + LOCOMO_ICR);
+}
+
+static struct irq_chip locomo_chip = {
+	.name		= "LOCOMO",
+	.irq_ack	= locomo_ack_irq,
+	.irq_mask	= locomo_mask_irq,
+	.irq_unmask	= locomo_unmask_irq,
+};
+
+static void locomo_setup_irq(struct locomo *lchip)
+{
+	int irq = lchip->irq_base;
+
+	/*
+	 * Install handler for IRQ_LOCOMO_HW.
+	 */
+	irq_set_irq_type(lchip->irq, IRQ_TYPE_EDGE_FALLING);
+	irq_set_chained_handler_and_data(lchip->irq, locomo_handler, lchip);
+
+	/* Install handlers for IRQ_LOCOMO_* */
+	for ( ; irq <= lchip->irq_base + 3; irq++) {
+		irq_set_chip_and_handler(irq, &locomo_chip, handle_level_irq);
+		irq_set_chip_data(irq, lchip);
+		irq_clear_status_flags(irq, IRQ_NOREQUEST | IRQ_NOPROBE);
+	}
+}
+
+
+static void locomo_dev_release(struct device *_dev)
+{
+	struct locomo_dev *dev = LOCOMO_DEV(_dev);
+
+	kfree(dev);
+}
+
+static int
+locomo_init_one_child(struct locomo *lchip, struct locomo_dev_info *info)
+{
+	struct locomo_dev *dev;
+	int ret;
+
+	dev = kzalloc(sizeof(struct locomo_dev), GFP_KERNEL);
+	if (!dev) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	/*
+	 * If the parent device has a DMA mask associated with it,
+	 * propagate it down to the children.
+	 */
+	if (lchip->dev->dma_mask) {
+		dev->dma_mask = *lchip->dev->dma_mask;
+		dev->dev.dma_mask = &dev->dma_mask;
+	}
+
+	dev_set_name(&dev->dev, "%s", info->name);
+	dev->devid	 = info->devid;
+	dev->dev.parent  = lchip->dev;
+	dev->dev.bus     = &locomo_bus_type;
+	dev->dev.release = locomo_dev_release;
+	dev->dev.coherent_dma_mask = lchip->dev->coherent_dma_mask;
+
+	if (info->offset)
+		dev->mapbase = lchip->base + info->offset;
+	else
+		dev->mapbase = 0;
+	dev->length = info->length;
+
+	dev->irq[0] = (lchip->irq_base == NO_IRQ) ?
+			NO_IRQ : lchip->irq_base + info->irq[0];
+
+	ret = device_register(&dev->dev);
+	if (ret) {
+ out:
+		kfree(dev);
+	}
+	return ret;
+}
+
+#ifdef CONFIG_PM
+
+struct locomo_save_data {
+	u16	LCM_GPO;
+	u16	LCM_SPICT;
+	u16	LCM_GPE;
+	u16	LCM_ASD;
+	u16	LCM_SPIMD;
+};
+
+static int locomo_suspend(struct platform_device *dev, pm_message_t state)
+{
+	struct locomo *lchip = platform_get_drvdata(dev);
+	struct locomo_save_data *save;
+	unsigned long flags;
+
+	save = kmalloc(sizeof(struct locomo_save_data), GFP_KERNEL);
+	if (!save)
+		return -ENOMEM;
+
+	lchip->saved_state = save;
+
+	spin_lock_irqsave(&lchip->lock, flags);
+
+	save->LCM_GPO     = locomo_readl(lchip->base + LOCOMO_GPO);	/* GPIO */
+	locomo_writel(0x00, lchip->base + LOCOMO_GPO);
+	save->LCM_SPICT   = locomo_readl(lchip->base + LOCOMO_SPI + LOCOMO_SPICT);	/* SPI */
+	locomo_writel(0x40, lchip->base + LOCOMO_SPI + LOCOMO_SPICT);
+	save->LCM_GPE     = locomo_readl(lchip->base + LOCOMO_GPE);	/* GPIO */
+	locomo_writel(0x00, lchip->base + LOCOMO_GPE);
+	save->LCM_ASD     = locomo_readl(lchip->base + LOCOMO_ASD);	/* ADSTART */
+	locomo_writel(0x00, lchip->base + LOCOMO_ASD);
+	save->LCM_SPIMD   = locomo_readl(lchip->base + LOCOMO_SPI + LOCOMO_SPIMD);	/* SPI */
+	locomo_writel(0x3C14, lchip->base + LOCOMO_SPI + LOCOMO_SPIMD);
+
+	locomo_writel(0x00, lchip->base + LOCOMO_PAIF);
+	locomo_writel(0x00, lchip->base + LOCOMO_DAC);
+	locomo_writel(0x00, lchip->base + LOCOMO_BACKLIGHT + LOCOMO_TC);
+
+	if ((locomo_readl(lchip->base + LOCOMO_LED + LOCOMO_LPT0) & 0x88) && (locomo_readl(lchip->base + LOCOMO_LED + LOCOMO_LPT1) & 0x88))
+		locomo_writel(0x00, lchip->base + LOCOMO_C32K); 	/* CLK32 off */
+	else
+		/* 18MHz already enabled, so no wait */
+		locomo_writel(0xc1, lchip->base + LOCOMO_C32K); 	/* CLK32 on */
+
+	locomo_writel(0x00, lchip->base + LOCOMO_TADC);		/* 18MHz clock off*/
+	locomo_writel(0x00, lchip->base + LOCOMO_AUDIO + LOCOMO_ACC);			/* 22MHz/24MHz clock off */
+	locomo_writel(0x00, lchip->base + LOCOMO_FRONTLIGHT + LOCOMO_ALS);			/* FL */
+
+	spin_unlock_irqrestore(&lchip->lock, flags);
+
+	return 0;
+}
+
+static int locomo_resume(struct platform_device *dev)
+{
+	struct locomo *lchip = platform_get_drvdata(dev);
+	struct locomo_save_data *save;
+	unsigned long r;
+	unsigned long flags;
+
+	save = lchip->saved_state;
+	if (!save)
+		return 0;
+
+	spin_lock_irqsave(&lchip->lock, flags);
+
+	locomo_writel(save->LCM_GPO, lchip->base + LOCOMO_GPO);
+	locomo_writel(save->LCM_SPICT, lchip->base + LOCOMO_SPI + LOCOMO_SPICT);
+	locomo_writel(save->LCM_GPE, lchip->base + LOCOMO_GPE);
+	locomo_writel(save->LCM_ASD, lchip->base + LOCOMO_ASD);
+	locomo_writel(save->LCM_SPIMD, lchip->base + LOCOMO_SPI + LOCOMO_SPIMD);
+
+	locomo_writel(0x00, lchip->base + LOCOMO_C32K);
+	locomo_writel(0x90, lchip->base + LOCOMO_TADC);
+
+	locomo_writel(0, lchip->base + LOCOMO_KEYBOARD + LOCOMO_KSC);
+	r = locomo_readl(lchip->base + LOCOMO_KEYBOARD + LOCOMO_KIC);
+	r &= 0xFEFF;
+	locomo_writel(r, lchip->base + LOCOMO_KEYBOARD + LOCOMO_KIC);
+	locomo_writel(0x1, lchip->base + LOCOMO_KEYBOARD + LOCOMO_KCMD);
+
+	spin_unlock_irqrestore(&lchip->lock, flags);
+
+	lchip->saved_state = NULL;
+	kfree(save);
+
+	return 0;
+}
+#endif
+
+
+/**
+ *	locomo_probe - probe for a single LoCoMo chip.
+ *	@phys_addr: physical address of device.
+ *
+ *	Probe for a LoCoMo chip.  This must be called
+ *	before any other locomo-specific code.
+ *
+ *	Returns:
+ *	%-ENODEV	device not found.
+ *	%-EBUSY		physical address already marked in-use.
+ *	%0		successful.
+ */
+static int
+__locomo_probe(struct device *me, struct resource *mem, int irq)
+{
+	struct locomo_platform_data *pdata = me->platform_data;
+	struct locomo *lchip;
+	unsigned long r;
+	int i, ret = -ENODEV;
+
+	lchip = kzalloc(sizeof(struct locomo), GFP_KERNEL);
+	if (!lchip)
+		return -ENOMEM;
+
+	spin_lock_init(&lchip->lock);
+
+	lchip->dev = me;
+	dev_set_drvdata(lchip->dev, lchip);
+
+	lchip->phys = mem->start;
+	lchip->irq = irq;
+	lchip->irq_base = (pdata) ? pdata->irq_base : NO_IRQ;
+
+	/*
+	 * Map the whole region.  This also maps the
+	 * registers for our children.
+	 */
+	lchip->base = ioremap(mem->start, PAGE_SIZE);
+	if (!lchip->base) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	/* locomo initialize */
+	locomo_writel(0, lchip->base + LOCOMO_ICR);
+	/* KEYBOARD */
+	locomo_writel(0, lchip->base + LOCOMO_KEYBOARD + LOCOMO_KIC);
+
+	/* GPIO */
+	locomo_writel(0, lchip->base + LOCOMO_GPO);
+	locomo_writel((LOCOMO_GPIO(1) | LOCOMO_GPIO(2) | LOCOMO_GPIO(13) | LOCOMO_GPIO(14))
+			, lchip->base + LOCOMO_GPE);
+	locomo_writel((LOCOMO_GPIO(1) | LOCOMO_GPIO(2) | LOCOMO_GPIO(13) | LOCOMO_GPIO(14))
+			, lchip->base + LOCOMO_GPD);
+	locomo_writel(0, lchip->base + LOCOMO_GIE);
+
+	/* Frontlight */
+	locomo_writel(0, lchip->base + LOCOMO_FRONTLIGHT + LOCOMO_ALS);
+	locomo_writel(0, lchip->base + LOCOMO_FRONTLIGHT + LOCOMO_ALD);
+
+	/* Longtime timer */
+	locomo_writel(0, lchip->base + LOCOMO_LTINT);
+	/* SPI */
+	locomo_writel(0, lchip->base + LOCOMO_SPI + LOCOMO_SPIIE);
+
+	locomo_writel(6 + 8 + 320 + 30 - 10, lchip->base + LOCOMO_ASD);
+	r = locomo_readl(lchip->base + LOCOMO_ASD);
+	r |= 0x8000;
+	locomo_writel(r, lchip->base + LOCOMO_ASD);
+
+	locomo_writel(6 + 8 + 320 + 30 - 10 - 128 + 4, lchip->base + LOCOMO_HSD);
+	r = locomo_readl(lchip->base + LOCOMO_HSD);
+	r |= 0x8000;
+	locomo_writel(r, lchip->base + LOCOMO_HSD);
+
+	locomo_writel(128 / 8, lchip->base + LOCOMO_HSC);
+
+	/* XON */
+	locomo_writel(0x80, lchip->base + LOCOMO_TADC);
+	udelay(1000);
+	/* CLK9MEN */
+	r = locomo_readl(lchip->base + LOCOMO_TADC);
+	r |= 0x10;
+	locomo_writel(r, lchip->base + LOCOMO_TADC);
+	udelay(100);
+
+	/* init DAC */
+	r = locomo_readl(lchip->base + LOCOMO_DAC);
+	r |= LOCOMO_DAC_SCLOEB | LOCOMO_DAC_SDAOEB;
+	locomo_writel(r, lchip->base + LOCOMO_DAC);
+
+	r = locomo_readl(lchip->base + LOCOMO_VER);
+	printk(KERN_INFO "LoCoMo Chip: %lu%lu\n", (r >> 8), (r & 0xff));
+
+	/*
+	 * The interrupt controller must be initialised before any
+	 * other device to ensure that the interrupts are available.
+	 */
+	if (lchip->irq != NO_IRQ && lchip->irq_base != NO_IRQ)
+		locomo_setup_irq(lchip);
+
+	for (i = 0; i < ARRAY_SIZE(locomo_devices); i++)
+		locomo_init_one_child(lchip, &locomo_devices[i]);
+	return 0;
+
+ out:
+	kfree(lchip);
+	return ret;
+}
+
+static int locomo_remove_child(struct device *dev, void *data)
+{
+	device_unregister(dev);
+	return 0;
+} 
+
+static void __locomo_remove(struct locomo *lchip)
+{
+	device_for_each_child(lchip->dev, NULL, locomo_remove_child);
+
+	if (lchip->irq != NO_IRQ) {
+		irq_set_chained_handler_and_data(lchip->irq, NULL, NULL);
+	}
+
+	iounmap(lchip->base);
+	kfree(lchip);
+}
+
+static int locomo_probe(struct platform_device *dev)
+{
+	struct resource *mem;
+	int irq;
+
+	mem = platform_get_resource(dev, IORESOURCE_MEM, 0);
+	if (!mem)
+		return -EINVAL;
+	irq = platform_get_irq(dev, 0);
+	if (irq < 0)
+		return -ENXIO;
+
+	return __locomo_probe(&dev->dev, mem, irq);
+}
+
+static int locomo_remove(struct platform_device *dev)
+{
+	struct locomo *lchip = platform_get_drvdata(dev);
+
+	if (lchip) {
+		__locomo_remove(lchip);
+		platform_set_drvdata(dev, NULL);
+	}
+
+	return 0;
+}
+
+/*
+ *	Not sure if this should be on the system bus or not yet.
+ *	We really want some way to register a system device at
+ *	the per-machine level, and then have this driver pick
+ *	up the registered devices.
+ */
+static struct platform_driver locomo_device_driver = {
+	.probe		= locomo_probe,
+	.remove		= locomo_remove,
+#ifdef CONFIG_PM
+	.suspend	= locomo_suspend,
+	.resume		= locomo_resume,
+#endif
+	.driver		= {
+		.name	= "locomo",
+	},
+};
+
+/*
+ *	Get the parent device driver (us) structure
+ *	from a child function device
+ */
+static inline struct locomo *locomo_chip_driver(struct locomo_dev *ldev)
+{
+	return (struct locomo *)dev_get_drvdata(ldev->dev.parent);
+}
+
+void locomo_gpio_set_dir(struct device *dev, unsigned int bits, unsigned int dir)
+{
+	struct locomo *lchip = dev_get_drvdata(dev);
+	unsigned long flags;
+	unsigned int r;
+
+	if (!lchip)
+		return;
+
+	spin_lock_irqsave(&lchip->lock, flags);
+
+	r = locomo_readl(lchip->base + LOCOMO_GPD);
+	if (dir)
+		r |= bits;
+	else
+		r &= ~bits;
+	locomo_writel(r, lchip->base + LOCOMO_GPD);
+
+	r = locomo_readl(lchip->base + LOCOMO_GPE);
+	if (dir)
+		r |= bits;
+	else
+		r &= ~bits;
+	locomo_writel(r, lchip->base + LOCOMO_GPE);
+
+	spin_unlock_irqrestore(&lchip->lock, flags);
+}
+EXPORT_SYMBOL(locomo_gpio_set_dir);
+
+int locomo_gpio_read_level(struct device *dev, unsigned int bits)
+{
+	struct locomo *lchip = dev_get_drvdata(dev);
+	unsigned long flags;
+	unsigned int ret;
+
+	if (!lchip)
+		return -ENODEV;
+
+	spin_lock_irqsave(&lchip->lock, flags);
+	ret = locomo_readl(lchip->base + LOCOMO_GPL);
+	spin_unlock_irqrestore(&lchip->lock, flags);
+
+	ret &= bits;
+	return ret;
+}
+EXPORT_SYMBOL(locomo_gpio_read_level);
+
+int locomo_gpio_read_output(struct device *dev, unsigned int bits)
+{
+	struct locomo *lchip = dev_get_drvdata(dev);
+	unsigned long flags;
+	unsigned int ret;
+
+	if (!lchip)
+		return -ENODEV;
+
+	spin_lock_irqsave(&lchip->lock, flags);
+	ret = locomo_readl(lchip->base + LOCOMO_GPO);
+	spin_unlock_irqrestore(&lchip->lock, flags);
+
+	ret &= bits;
+	return ret;
+}
+EXPORT_SYMBOL(locomo_gpio_read_output);
+
+void locomo_gpio_write(struct device *dev, unsigned int bits, unsigned int set)
+{
+	struct locomo *lchip = dev_get_drvdata(dev);
+	unsigned long flags;
+	unsigned int r;
+
+	if (!lchip)
+		return;
+
+	spin_lock_irqsave(&lchip->lock, flags);
+
+	r = locomo_readl(lchip->base + LOCOMO_GPO);
+	if (set)
+		r |= bits;
+	else
+		r &= ~bits;
+	locomo_writel(r, lchip->base + LOCOMO_GPO);
+
+	spin_unlock_irqrestore(&lchip->lock, flags);
+}
+EXPORT_SYMBOL(locomo_gpio_write);
+
+static void locomo_m62332_sendbit(void *mapbase, int bit)
+{
+	unsigned int r;
+
+	r = locomo_readl(mapbase + LOCOMO_DAC);
+	r &=  ~(LOCOMO_DAC_SCLOEB);
+	locomo_writel(r, mapbase + LOCOMO_DAC);
+	udelay(DAC_LOW_SETUP_TIME);	/* 300 nsec */
+	udelay(DAC_DATA_HOLD_TIME);	/* 300 nsec */
+	r = locomo_readl(mapbase + LOCOMO_DAC);
+	r &=  ~(LOCOMO_DAC_SCLOEB);
+	locomo_writel(r, mapbase + LOCOMO_DAC);
+	udelay(DAC_LOW_SETUP_TIME);	/* 300 nsec */
+	udelay(DAC_SCL_LOW_HOLD_TIME);	/* 4.7 usec */
+
+	if (bit & 1) {
+		r = locomo_readl(mapbase + LOCOMO_DAC);
+		r |=  LOCOMO_DAC_SDAOEB;
+		locomo_writel(r, mapbase + LOCOMO_DAC);
+		udelay(DAC_HIGH_SETUP_TIME);	/* 1000 nsec */
+	} else {
+		r = locomo_readl(mapbase + LOCOMO_DAC);
+		r &=  ~(LOCOMO_DAC_SDAOEB);
+		locomo_writel(r, mapbase + LOCOMO_DAC);
+		udelay(DAC_LOW_SETUP_TIME);	/* 300 nsec */
+	}
+
+	udelay(DAC_DATA_SETUP_TIME);	/* 250 nsec */
+	r = locomo_readl(mapbase + LOCOMO_DAC);
+	r |=  LOCOMO_DAC_SCLOEB;
+	locomo_writel(r, mapbase + LOCOMO_DAC);
+	udelay(DAC_HIGH_SETUP_TIME);	/* 1000 nsec */
+	udelay(DAC_SCL_HIGH_HOLD_TIME);	/*  4.0 usec */
+}
+
+void locomo_m62332_senddata(struct locomo_dev *ldev, unsigned int dac_data, int channel)
+{
+	struct locomo *lchip = locomo_chip_driver(ldev);
+	int i;
+	unsigned char data;
+	unsigned int r;
+	void *mapbase = lchip->base;
+	unsigned long flags;
+
+	spin_lock_irqsave(&lchip->lock, flags);
+
+	/* Start */
+	udelay(DAC_BUS_FREE_TIME);	/* 5.0 usec */
+	r = locomo_readl(mapbase + LOCOMO_DAC);
+	r |=  LOCOMO_DAC_SCLOEB | LOCOMO_DAC_SDAOEB;
+	locomo_writel(r, mapbase + LOCOMO_DAC);
+	udelay(DAC_HIGH_SETUP_TIME);	/* 1000 nsec */
+	udelay(DAC_SCL_HIGH_HOLD_TIME);	/* 4.0 usec */
+	r = locomo_readl(mapbase + LOCOMO_DAC);
+	r &=  ~(LOCOMO_DAC_SDAOEB);
+	locomo_writel(r, mapbase + LOCOMO_DAC);
+	udelay(DAC_START_HOLD_TIME);	/* 5.0 usec */
+	udelay(DAC_DATA_HOLD_TIME);	/* 300 nsec */
+
+	/* Send slave address and W bit (LSB is W bit) */
+	data = (M62332_SLAVE_ADDR << 1) | M62332_W_BIT;
+	for (i = 1; i <= 8; i++) {
+		locomo_m62332_sendbit(mapbase, data >> (8 - i));
+	}
+
+	/* Check A bit */
+	r = locomo_readl(mapbase + LOCOMO_DAC);
+	r &=  ~(LOCOMO_DAC_SCLOEB);
+	locomo_writel(r, mapbase + LOCOMO_DAC);
+	udelay(DAC_LOW_SETUP_TIME);	/* 300 nsec */
+	udelay(DAC_SCL_LOW_HOLD_TIME);	/* 4.7 usec */
+	r = locomo_readl(mapbase + LOCOMO_DAC);
+	r &=  ~(LOCOMO_DAC_SDAOEB);
+	locomo_writel(r, mapbase + LOCOMO_DAC);
+	udelay(DAC_LOW_SETUP_TIME);	/* 300 nsec */
+	r = locomo_readl(mapbase + LOCOMO_DAC);
+	r |=  LOCOMO_DAC_SCLOEB;
+	locomo_writel(r, mapbase + LOCOMO_DAC);
+	udelay(DAC_HIGH_SETUP_TIME);	/* 1000 nsec */
+	udelay(DAC_SCL_HIGH_HOLD_TIME);	/* 4.7 usec */
+	if (locomo_readl(mapbase + LOCOMO_DAC) & LOCOMO_DAC_SDAOEB) {	/* High is error */
+		printk(KERN_WARNING "locomo: m62332_senddata Error 1\n");
+		goto out;
+	}
+
+	/* Send Sub address (LSB is channel select) */
+	/*    channel = 0 : ch1 select              */
+	/*            = 1 : ch2 select              */
+	data = M62332_SUB_ADDR + channel;
+	for (i = 1; i <= 8; i++) {
+		locomo_m62332_sendbit(mapbase, data >> (8 - i));
+	}
+
+	/* Check A bit */
+	r = locomo_readl(mapbase + LOCOMO_DAC);
+	r &=  ~(LOCOMO_DAC_SCLOEB);
+	locomo_writel(r, mapbase + LOCOMO_DAC);
+	udelay(DAC_LOW_SETUP_TIME);	/* 300 nsec */
+	udelay(DAC_SCL_LOW_HOLD_TIME);	/* 4.7 usec */
+	r = locomo_readl(mapbase + LOCOMO_DAC);
+	r &=  ~(LOCOMO_DAC_SDAOEB);
+	locomo_writel(r, mapbase + LOCOMO_DAC);
+	udelay(DAC_LOW_SETUP_TIME);	/* 300 nsec */
+	r = locomo_readl(mapbase + LOCOMO_DAC);
+	r |=  LOCOMO_DAC_SCLOEB;
+	locomo_writel(r, mapbase + LOCOMO_DAC);
+	udelay(DAC_HIGH_SETUP_TIME);	/* 1000 nsec */
+	udelay(DAC_SCL_HIGH_HOLD_TIME);	/* 4.7 usec */
+	if (locomo_readl(mapbase + LOCOMO_DAC) & LOCOMO_DAC_SDAOEB) {	/* High is error */
+		printk(KERN_WARNING "locomo: m62332_senddata Error 2\n");
+		goto out;
+	}
+
+	/* Send DAC data */
+	for (i = 1; i <= 8; i++) {
+		locomo_m62332_sendbit(mapbase, dac_data >> (8 - i));
+	}
+
+	/* Check A bit */
+	r = locomo_readl(mapbase + LOCOMO_DAC);
+	r &=  ~(LOCOMO_DAC_SCLOEB);
+	locomo_writel(r, mapbase + LOCOMO_DAC);
+	udelay(DAC_LOW_SETUP_TIME);	/* 300 nsec */
+	udelay(DAC_SCL_LOW_HOLD_TIME);	/* 4.7 usec */
+	r = locomo_readl(mapbase + LOCOMO_DAC);
+	r &=  ~(LOCOMO_DAC_SDAOEB);
+	locomo_writel(r, mapbase + LOCOMO_DAC);
+	udelay(DAC_LOW_SETUP_TIME);	/* 300 nsec */
+	r = locomo_readl(mapbase + LOCOMO_DAC);
+	r |=  LOCOMO_DAC_SCLOEB;
+	locomo_writel(r, mapbase + LOCOMO_DAC);
+	udelay(DAC_HIGH_SETUP_TIME);	/* 1000 nsec */
+	udelay(DAC_SCL_HIGH_HOLD_TIME);	/* 4.7 usec */
+	if (locomo_readl(mapbase + LOCOMO_DAC) & LOCOMO_DAC_SDAOEB) {	/* High is error */
+		printk(KERN_WARNING "locomo: m62332_senddata Error 3\n");
+	}
+
+out:
+	/* stop */
+	r = locomo_readl(mapbase + LOCOMO_DAC);
+	r &=  ~(LOCOMO_DAC_SCLOEB);
+	locomo_writel(r, mapbase + LOCOMO_DAC);
+	udelay(DAC_LOW_SETUP_TIME);	/* 300 nsec */
+	udelay(DAC_SCL_LOW_HOLD_TIME);	/* 4.7 usec */
+	r = locomo_readl(mapbase + LOCOMO_DAC);
+	r |=  LOCOMO_DAC_SCLOEB;
+	locomo_writel(r, mapbase + LOCOMO_DAC);
+	udelay(DAC_HIGH_SETUP_TIME);	/* 1000 nsec */
+	udelay(DAC_SCL_HIGH_HOLD_TIME);	/* 4 usec */
+	r = locomo_readl(mapbase + LOCOMO_DAC);
+	r |=  LOCOMO_DAC_SDAOEB;
+	locomo_writel(r, mapbase + LOCOMO_DAC);
+	udelay(DAC_HIGH_SETUP_TIME);	/* 1000 nsec */
+	udelay(DAC_SCL_HIGH_HOLD_TIME);	/* 4 usec */
+
+	r = locomo_readl(mapbase + LOCOMO_DAC);
+	r |=  LOCOMO_DAC_SCLOEB | LOCOMO_DAC_SDAOEB;
+	locomo_writel(r, mapbase + LOCOMO_DAC);
+	udelay(DAC_LOW_SETUP_TIME);	/* 1000 nsec */
+	udelay(DAC_SCL_LOW_HOLD_TIME);	/* 4.7 usec */
+
+	spin_unlock_irqrestore(&lchip->lock, flags);
+}
+EXPORT_SYMBOL(locomo_m62332_senddata);
+
+/*
+ *	Frontlight control
+ */
+
+void locomo_frontlight_set(struct locomo_dev *dev, int duty, int vr, int bpwf)
+{
+	unsigned long flags;
+	struct locomo *lchip = locomo_chip_driver(dev);
+
+	if (vr)
+		locomo_gpio_write(dev->dev.parent, LOCOMO_GPIO_FL_VR, 1);
+	else
+		locomo_gpio_write(dev->dev.parent, LOCOMO_GPIO_FL_VR, 0);
+
+	spin_lock_irqsave(&lchip->lock, flags);
+	locomo_writel(bpwf, lchip->base + LOCOMO_FRONTLIGHT + LOCOMO_ALS);
+	udelay(100);
+	locomo_writel(duty, lchip->base + LOCOMO_FRONTLIGHT + LOCOMO_ALD);
+	locomo_writel(bpwf | LOCOMO_ALC_EN, lchip->base + LOCOMO_FRONTLIGHT + LOCOMO_ALS);
+	spin_unlock_irqrestore(&lchip->lock, flags);
+}
+EXPORT_SYMBOL(locomo_frontlight_set);
+
+/*
+ *	LoCoMo "Register Access Bus."
+ *
+ *	We model this as a regular bus type, and hang devices directly
+ *	off this.
+ */
+static int locomo_match(struct device *_dev, struct device_driver *_drv)
+{
+	struct locomo_dev *dev = LOCOMO_DEV(_dev);
+	struct locomo_driver *drv = LOCOMO_DRV(_drv);
+
+	return dev->devid == drv->devid;
+}
+
+static int locomo_bus_probe(struct device *dev)
+{
+	struct locomo_dev *ldev = LOCOMO_DEV(dev);
+	struct locomo_driver *drv = LOCOMO_DRV(dev->driver);
+	int ret = -ENODEV;
+
+	if (drv->probe)
+		ret = drv->probe(ldev);
+	return ret;
+}
+
+static void locomo_bus_remove(struct device *dev)
+{
+	struct locomo_dev *ldev = LOCOMO_DEV(dev);
+	struct locomo_driver *drv = LOCOMO_DRV(dev->driver);
+
+	if (drv->remove)
+		drv->remove(ldev);
+}
+
+struct bus_type locomo_bus_type = {
+	.name		= "locomo-bus",
+	.match		= locomo_match,
+	.probe		= locomo_bus_probe,
+	.remove		= locomo_bus_remove,
+};
+
+int locomo_driver_register(struct locomo_driver *driver)
+{
+	driver->drv.bus = &locomo_bus_type;
+	return driver_register(&driver->drv);
+}
+EXPORT_SYMBOL(locomo_driver_register);
+
+void locomo_driver_unregister(struct locomo_driver *driver)
+{
+	driver_unregister(&driver->drv);
+}
+EXPORT_SYMBOL(locomo_driver_unregister);
+
+static int __init locomo_init(void)
+{
+	int ret = bus_register(&locomo_bus_type);
+	if (ret == 0)
+		platform_driver_register(&locomo_device_driver);
+	return ret;
+}
+
+static void __exit locomo_exit(void)
+{
+	platform_driver_unregister(&locomo_device_driver);
+	bus_unregister(&locomo_bus_type);
+}
+
+module_init(locomo_init);
+module_exit(locomo_exit);
+
+MODULE_DESCRIPTION("Sharp LoCoMo core driver");
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("John Lenz <lenz@cs.wisc.edu>");
diff --git a/arch/arm/common/mcpm_entry.c b/arch/arm/common/mcpm_entry.c
new file mode 100644
index 000000000..8a9aeeb50
--- /dev/null
+++ b/arch/arm/common/mcpm_entry.c
@@ -0,0 +1,456 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * arch/arm/common/mcpm_entry.c -- entry point for multi-cluster PM
+ *
+ * Created by:  Nicolas Pitre, March 2012
+ * Copyright:   (C) 2012-2013  Linaro Limited
+ */
+
+#include <linux/export.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/irqflags.h>
+#include <linux/cpu_pm.h>
+
+#include <asm/mcpm.h>
+#include <asm/cacheflush.h>
+#include <asm/idmap.h>
+#include <asm/cputype.h>
+#include <asm/suspend.h>
+
+/*
+ * The public API for this code is documented in arch/arm/include/asm/mcpm.h.
+ * For a comprehensive description of the main algorithm used here, please
+ * see Documentation/arm/cluster-pm-race-avoidance.rst.
+ */
+
+struct sync_struct mcpm_sync;
+
+/*
+ * __mcpm_cpu_going_down: Indicates that the cpu is being torn down.
+ *    This must be called at the point of committing to teardown of a CPU.
+ *    The CPU cache (SCTRL.C bit) is expected to still be active.
+ */
+static void __mcpm_cpu_going_down(unsigned int cpu, unsigned int cluster)
+{
+	mcpm_sync.clusters[cluster].cpus[cpu].cpu = CPU_GOING_DOWN;
+	sync_cache_w(&mcpm_sync.clusters[cluster].cpus[cpu].cpu);
+}
+
+/*
+ * __mcpm_cpu_down: Indicates that cpu teardown is complete and that the
+ *    cluster can be torn down without disrupting this CPU.
+ *    To avoid deadlocks, this must be called before a CPU is powered down.
+ *    The CPU cache (SCTRL.C bit) is expected to be off.
+ *    However L2 cache might or might not be active.
+ */
+static void __mcpm_cpu_down(unsigned int cpu, unsigned int cluster)
+{
+	dmb();
+	mcpm_sync.clusters[cluster].cpus[cpu].cpu = CPU_DOWN;
+	sync_cache_w(&mcpm_sync.clusters[cluster].cpus[cpu].cpu);
+	sev();
+}
+
+/*
+ * __mcpm_outbound_leave_critical: Leave the cluster teardown critical section.
+ * @state: the final state of the cluster:
+ *     CLUSTER_UP: no destructive teardown was done and the cluster has been
+ *         restored to the previous state (CPU cache still active); or
+ *     CLUSTER_DOWN: the cluster has been torn-down, ready for power-off
+ *         (CPU cache disabled, L2 cache either enabled or disabled).
+ */
+static void __mcpm_outbound_leave_critical(unsigned int cluster, int state)
+{
+	dmb();
+	mcpm_sync.clusters[cluster].cluster = state;
+	sync_cache_w(&mcpm_sync.clusters[cluster].cluster);
+	sev();
+}
+
+/*
+ * __mcpm_outbound_enter_critical: Enter the cluster teardown critical section.
+ * This function should be called by the last man, after local CPU teardown
+ * is complete.  CPU cache expected to be active.
+ *
+ * Returns:
+ *     false: the critical section was not entered because an inbound CPU was
+ *         observed, or the cluster is already being set up;
+ *     true: the critical section was entered: it is now safe to tear down the
+ *         cluster.
+ */
+static bool __mcpm_outbound_enter_critical(unsigned int cpu, unsigned int cluster)
+{
+	unsigned int i;
+	struct mcpm_sync_struct *c = &mcpm_sync.clusters[cluster];
+
+	/* Warn inbound CPUs that the cluster is being torn down: */
+	c->cluster = CLUSTER_GOING_DOWN;
+	sync_cache_w(&c->cluster);
+
+	/* Back out if the inbound cluster is already in the critical region: */
+	sync_cache_r(&c->inbound);
+	if (c->inbound == INBOUND_COMING_UP)
+		goto abort;
+
+	/*
+	 * Wait for all CPUs to get out of the GOING_DOWN state, so that local
+	 * teardown is complete on each CPU before tearing down the cluster.
+	 *
+	 * If any CPU has been woken up again from the DOWN state, then we
+	 * shouldn't be taking the cluster down at all: abort in that case.
+	 */
+	sync_cache_r(&c->cpus);
+	for (i = 0; i < MAX_CPUS_PER_CLUSTER; i++) {
+		int cpustate;
+
+		if (i == cpu)
+			continue;
+
+		while (1) {
+			cpustate = c->cpus[i].cpu;
+			if (cpustate != CPU_GOING_DOWN)
+				break;
+
+			wfe();
+			sync_cache_r(&c->cpus[i].cpu);
+		}
+
+		switch (cpustate) {
+		case CPU_DOWN:
+			continue;
+
+		default:
+			goto abort;
+		}
+	}
+
+	return true;
+
+abort:
+	__mcpm_outbound_leave_critical(cluster, CLUSTER_UP);
+	return false;
+}
+
+static int __mcpm_cluster_state(unsigned int cluster)
+{
+	sync_cache_r(&mcpm_sync.clusters[cluster].cluster);
+	return mcpm_sync.clusters[cluster].cluster;
+}
+
+extern unsigned long mcpm_entry_vectors[MAX_NR_CLUSTERS][MAX_CPUS_PER_CLUSTER];
+
+void mcpm_set_entry_vector(unsigned cpu, unsigned cluster, void *ptr)
+{
+	unsigned long val = ptr ? __pa_symbol(ptr) : 0;
+	mcpm_entry_vectors[cluster][cpu] = val;
+	sync_cache_w(&mcpm_entry_vectors[cluster][cpu]);
+}
+
+extern unsigned long mcpm_entry_early_pokes[MAX_NR_CLUSTERS][MAX_CPUS_PER_CLUSTER][2];
+
+void mcpm_set_early_poke(unsigned cpu, unsigned cluster,
+			 unsigned long poke_phys_addr, unsigned long poke_val)
+{
+	unsigned long *poke = &mcpm_entry_early_pokes[cluster][cpu][0];
+	poke[0] = poke_phys_addr;
+	poke[1] = poke_val;
+	__sync_cache_range_w(poke, 2 * sizeof(*poke));
+}
+
+static const struct mcpm_platform_ops *platform_ops;
+
+int __init mcpm_platform_register(const struct mcpm_platform_ops *ops)
+{
+	if (platform_ops)
+		return -EBUSY;
+	platform_ops = ops;
+	return 0;
+}
+
+bool mcpm_is_available(void)
+{
+	return (platform_ops) ? true : false;
+}
+EXPORT_SYMBOL_GPL(mcpm_is_available);
+
+/*
+ * We can't use regular spinlocks. In the switcher case, it is possible
+ * for an outbound CPU to call power_down() after its inbound counterpart
+ * is already live using the same logical CPU number which trips lockdep
+ * debugging.
+ */
+static arch_spinlock_t mcpm_lock = __ARCH_SPIN_LOCK_UNLOCKED;
+
+static int mcpm_cpu_use_count[MAX_NR_CLUSTERS][MAX_CPUS_PER_CLUSTER];
+
+static inline bool mcpm_cluster_unused(unsigned int cluster)
+{
+	int i, cnt;
+	for (i = 0, cnt = 0; i < MAX_CPUS_PER_CLUSTER; i++)
+		cnt |= mcpm_cpu_use_count[cluster][i];
+	return !cnt;
+}
+
+int mcpm_cpu_power_up(unsigned int cpu, unsigned int cluster)
+{
+	bool cpu_is_down, cluster_is_down;
+	int ret = 0;
+
+	pr_debug("%s: cpu %u cluster %u\n", __func__, cpu, cluster);
+	if (!platform_ops)
+		return -EUNATCH; /* try not to shadow power_up errors */
+	might_sleep();
+
+	/*
+	 * Since this is called with IRQs enabled, and no arch_spin_lock_irq
+	 * variant exists, we need to disable IRQs manually here.
+	 */
+	local_irq_disable();
+	arch_spin_lock(&mcpm_lock);
+
+	cpu_is_down = !mcpm_cpu_use_count[cluster][cpu];
+	cluster_is_down = mcpm_cluster_unused(cluster);
+
+	mcpm_cpu_use_count[cluster][cpu]++;
+	/*
+	 * The only possible values are:
+	 * 0 = CPU down
+	 * 1 = CPU (still) up
+	 * 2 = CPU requested to be up before it had a chance
+	 *     to actually make itself down.
+	 * Any other value is a bug.
+	 */
+	BUG_ON(mcpm_cpu_use_count[cluster][cpu] != 1 &&
+	       mcpm_cpu_use_count[cluster][cpu] != 2);
+
+	if (cluster_is_down)
+		ret = platform_ops->cluster_powerup(cluster);
+	if (cpu_is_down && !ret)
+		ret = platform_ops->cpu_powerup(cpu, cluster);
+
+	arch_spin_unlock(&mcpm_lock);
+	local_irq_enable();
+	return ret;
+}
+
+typedef typeof(cpu_reset) phys_reset_t;
+
+void mcpm_cpu_power_down(void)
+{
+	unsigned int mpidr, cpu, cluster;
+	bool cpu_going_down, last_man;
+	phys_reset_t phys_reset;
+
+	mpidr = read_cpuid_mpidr();
+	cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0);
+	cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1);
+	pr_debug("%s: cpu %u cluster %u\n", __func__, cpu, cluster);
+	if (WARN_ON_ONCE(!platform_ops))
+	       return;
+	BUG_ON(!irqs_disabled());
+
+	setup_mm_for_reboot();
+
+	__mcpm_cpu_going_down(cpu, cluster);
+	arch_spin_lock(&mcpm_lock);
+	BUG_ON(__mcpm_cluster_state(cluster) != CLUSTER_UP);
+
+	mcpm_cpu_use_count[cluster][cpu]--;
+	BUG_ON(mcpm_cpu_use_count[cluster][cpu] != 0 &&
+	       mcpm_cpu_use_count[cluster][cpu] != 1);
+	cpu_going_down = !mcpm_cpu_use_count[cluster][cpu];
+	last_man = mcpm_cluster_unused(cluster);
+
+	if (last_man && __mcpm_outbound_enter_critical(cpu, cluster)) {
+		platform_ops->cpu_powerdown_prepare(cpu, cluster);
+		platform_ops->cluster_powerdown_prepare(cluster);
+		arch_spin_unlock(&mcpm_lock);
+		platform_ops->cluster_cache_disable();
+		__mcpm_outbound_leave_critical(cluster, CLUSTER_DOWN);
+	} else {
+		if (cpu_going_down)
+			platform_ops->cpu_powerdown_prepare(cpu, cluster);
+		arch_spin_unlock(&mcpm_lock);
+		/*
+		 * If cpu_going_down is false here, that means a power_up
+		 * request raced ahead of us.  Even if we do not want to
+		 * shut this CPU down, the caller still expects execution
+		 * to return through the system resume entry path, like
+		 * when the WFI is aborted due to a new IRQ or the like..
+		 * So let's continue with cache cleaning in all cases.
+		 */
+		platform_ops->cpu_cache_disable();
+	}
+
+	__mcpm_cpu_down(cpu, cluster);
+
+	/* Now we are prepared for power-down, do it: */
+	if (cpu_going_down)
+		wfi();
+
+	/*
+	 * It is possible for a power_up request to happen concurrently
+	 * with a power_down request for the same CPU. In this case the
+	 * CPU might not be able to actually enter a powered down state
+	 * with the WFI instruction if the power_up request has removed
+	 * the required reset condition.  We must perform a re-entry in
+	 * the kernel as if the power_up method just had deasserted reset
+	 * on the CPU.
+	 */
+	phys_reset = (phys_reset_t)(unsigned long)__pa_symbol(cpu_reset);
+	phys_reset(__pa_symbol(mcpm_entry_point), false);
+
+	/* should never get here */
+	BUG();
+}
+
+int mcpm_wait_for_cpu_powerdown(unsigned int cpu, unsigned int cluster)
+{
+	int ret;
+
+	if (WARN_ON_ONCE(!platform_ops || !platform_ops->wait_for_powerdown))
+		return -EUNATCH;
+
+	ret = platform_ops->wait_for_powerdown(cpu, cluster);
+	if (ret)
+		pr_warn("%s: cpu %u, cluster %u failed to power down (%d)\n",
+			__func__, cpu, cluster, ret);
+
+	return ret;
+}
+
+void mcpm_cpu_suspend(void)
+{
+	if (WARN_ON_ONCE(!platform_ops))
+		return;
+
+	/* Some platforms might have to enable special resume modes, etc. */
+	if (platform_ops->cpu_suspend_prepare) {
+		unsigned int mpidr = read_cpuid_mpidr();
+		unsigned int cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0);
+		unsigned int cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1); 
+		arch_spin_lock(&mcpm_lock);
+		platform_ops->cpu_suspend_prepare(cpu, cluster);
+		arch_spin_unlock(&mcpm_lock);
+	}
+	mcpm_cpu_power_down();
+}
+
+int mcpm_cpu_powered_up(void)
+{
+	unsigned int mpidr, cpu, cluster;
+	bool cpu_was_down, first_man;
+	unsigned long flags;
+
+	if (!platform_ops)
+		return -EUNATCH;
+
+	mpidr = read_cpuid_mpidr();
+	cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0);
+	cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1);
+	local_irq_save(flags);
+	arch_spin_lock(&mcpm_lock);
+
+	cpu_was_down = !mcpm_cpu_use_count[cluster][cpu];
+	first_man = mcpm_cluster_unused(cluster);
+
+	if (first_man && platform_ops->cluster_is_up)
+		platform_ops->cluster_is_up(cluster);
+	if (cpu_was_down)
+		mcpm_cpu_use_count[cluster][cpu] = 1;
+	if (platform_ops->cpu_is_up)
+		platform_ops->cpu_is_up(cpu, cluster);
+
+	arch_spin_unlock(&mcpm_lock);
+	local_irq_restore(flags);
+
+	return 0;
+}
+
+#ifdef CONFIG_ARM_CPU_SUSPEND
+
+static int __init nocache_trampoline(unsigned long _arg)
+{
+	void (*cache_disable)(void) = (void *)_arg;
+	unsigned int mpidr = read_cpuid_mpidr();
+	unsigned int cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0);
+	unsigned int cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1);
+	phys_reset_t phys_reset;
+
+	mcpm_set_entry_vector(cpu, cluster, cpu_resume_no_hyp);
+	setup_mm_for_reboot();
+
+	__mcpm_cpu_going_down(cpu, cluster);
+	BUG_ON(!__mcpm_outbound_enter_critical(cpu, cluster));
+	cache_disable();
+	__mcpm_outbound_leave_critical(cluster, CLUSTER_DOWN);
+	__mcpm_cpu_down(cpu, cluster);
+
+	phys_reset = (phys_reset_t)(unsigned long)__pa_symbol(cpu_reset);
+	phys_reset(__pa_symbol(mcpm_entry_point), false);
+	BUG();
+}
+
+int __init mcpm_loopback(void (*cache_disable)(void))
+{
+	int ret;
+
+	/*
+	 * We're going to soft-restart the current CPU through the
+	 * low-level MCPM code by leveraging the suspend/resume
+	 * infrastructure. Let's play it safe by using cpu_pm_enter()
+	 * in case the CPU init code path resets the VFP or similar.
+	 */
+	local_irq_disable();
+	local_fiq_disable();
+	ret = cpu_pm_enter();
+	if (!ret) {
+		ret = cpu_suspend((unsigned long)cache_disable, nocache_trampoline);
+		cpu_pm_exit();
+	}
+	local_fiq_enable();
+	local_irq_enable();
+	if (ret)
+		pr_err("%s returned %d\n", __func__, ret);
+	return ret;
+}
+
+#endif
+
+extern unsigned long mcpm_power_up_setup_phys;
+
+int __init mcpm_sync_init(
+	void (*power_up_setup)(unsigned int affinity_level))
+{
+	unsigned int i, j, mpidr, this_cluster;
+
+	BUILD_BUG_ON(MCPM_SYNC_CLUSTER_SIZE * MAX_NR_CLUSTERS != sizeof mcpm_sync);
+	BUG_ON((unsigned long)&mcpm_sync & (__CACHE_WRITEBACK_GRANULE - 1));
+
+	/*
+	 * Set initial CPU and cluster states.
+	 * Only one cluster is assumed to be active at this point.
+	 */
+	for (i = 0; i < MAX_NR_CLUSTERS; i++) {
+		mcpm_sync.clusters[i].cluster = CLUSTER_DOWN;
+		mcpm_sync.clusters[i].inbound = INBOUND_NOT_COMING_UP;
+		for (j = 0; j < MAX_CPUS_PER_CLUSTER; j++)
+			mcpm_sync.clusters[i].cpus[j].cpu = CPU_DOWN;
+	}
+	mpidr = read_cpuid_mpidr();
+	this_cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1);
+	for_each_online_cpu(i) {
+		mcpm_cpu_use_count[this_cluster][i] = 1;
+		mcpm_sync.clusters[this_cluster].cpus[i].cpu = CPU_UP;
+	}
+	mcpm_sync.clusters[this_cluster].cluster = CLUSTER_UP;
+	sync_cache_w(&mcpm_sync);
+
+	if (power_up_setup) {
+		mcpm_power_up_setup_phys = __pa_symbol(power_up_setup);
+		sync_cache_w(&mcpm_power_up_setup_phys);
+	}
+
+	return 0;
+}
diff --git a/arch/arm/common/mcpm_head.S b/arch/arm/common/mcpm_head.S
new file mode 100644
index 000000000..291d969bc
--- /dev/null
+++ b/arch/arm/common/mcpm_head.S
@@ -0,0 +1,229 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * arch/arm/common/mcpm_head.S -- kernel entry point for multi-cluster PM
+ *
+ * Created by:  Nicolas Pitre, March 2012
+ * Copyright:   (C) 2012-2013  Linaro Limited
+ *
+ * Refer to Documentation/arm/cluster-pm-race-avoidance.rst
+ * for details of the synchronisation algorithms used here.
+ */
+
+#include <linux/linkage.h>
+#include <asm/mcpm.h>
+#include <asm/assembler.h>
+
+#include "vlock.h"
+
+.if MCPM_SYNC_CLUSTER_CPUS
+.error "cpus must be the first member of struct mcpm_sync_struct"
+.endif
+
+	.macro	pr_dbg	string
+#if defined(CONFIG_DEBUG_LL) && defined(DEBUG)
+	b	1901f
+1902:	.asciz	"CPU"
+1903:	.asciz	" cluster"
+1904:	.asciz	": \string"
+	.align
+1901:	adr	r0, 1902b
+	bl	printascii
+	mov	r0, r9
+	bl	printhex2
+	adr	r0, 1903b
+	bl	printascii
+	mov	r0, r10
+	bl	printhex2
+	adr	r0, 1904b
+	bl	printascii
+#endif
+	.endm
+
+	.arm
+	.align
+
+ENTRY(mcpm_entry_point)
+
+ ARM_BE8(setend        be)
+ THUMB(	badr	r12, 1f		)
+ THUMB(	bx	r12		)
+ THUMB(	.thumb			)
+1:
+	mrc	p15, 0, r0, c0, c0, 5		@ MPIDR
+	ubfx	r9, r0, #0, #8			@ r9 = cpu
+	ubfx	r10, r0, #8, #8			@ r10 = cluster
+	mov	r3, #MAX_CPUS_PER_CLUSTER
+	mla	r4, r3, r10, r9			@ r4 = canonical CPU index
+	cmp	r4, #(MAX_CPUS_PER_CLUSTER * MAX_NR_CLUSTERS)
+	blo	2f
+
+	/* We didn't expect this CPU.  Try to cheaply make it quiet. */
+1:	wfi
+	wfe
+	b	1b
+
+2:	pr_dbg	"kernel mcpm_entry_point\n"
+
+	/*
+	 * MMU is off so we need to get to various variables in a
+	 * position independent way.
+	 */
+	adr	r5, 3f
+	ldmia	r5, {r0, r6, r7, r8, r11}
+	add	r0, r5, r0			@ r0 = mcpm_entry_early_pokes
+	add	r6, r5, r6			@ r6 = mcpm_entry_vectors
+	ldr	r7, [r5, r7]			@ r7 = mcpm_power_up_setup_phys
+	add	r8, r5, r8			@ r8 = mcpm_sync
+	add	r11, r5, r11			@ r11 = first_man_locks
+
+	@ Perform an early poke, if any
+	add	r0, r0, r4, lsl #3
+	ldmia	r0, {r0, r1}
+	teq	r0, #0
+	strne	r1, [r0]
+
+	mov	r0, #MCPM_SYNC_CLUSTER_SIZE
+	mla	r8, r0, r10, r8			@ r8 = sync cluster base
+
+	@ Signal that this CPU is coming UP:
+	mov	r0, #CPU_COMING_UP
+	mov	r5, #MCPM_SYNC_CPU_SIZE
+	mla	r5, r9, r5, r8			@ r5 = sync cpu address
+	strb	r0, [r5]
+
+	@ At this point, the cluster cannot unexpectedly enter the GOING_DOWN
+	@ state, because there is at least one active CPU (this CPU).
+
+	mov	r0, #VLOCK_SIZE
+	mla	r11, r0, r10, r11		@ r11 = cluster first man lock
+	mov	r0, r11
+	mov	r1, r9				@ cpu
+	bl	vlock_trylock			@ implies DMB
+
+	cmp	r0, #0				@ failed to get the lock?
+	bne	mcpm_setup_wait		@ wait for cluster setup if so
+
+	ldrb	r0, [r8, #MCPM_SYNC_CLUSTER_CLUSTER]
+	cmp	r0, #CLUSTER_UP			@ cluster already up?
+	bne	mcpm_setup			@ if not, set up the cluster
+
+	@ Otherwise, release the first man lock and skip setup:
+	mov	r0, r11
+	bl	vlock_unlock
+	b	mcpm_setup_complete
+
+mcpm_setup:
+	@ Control dependency implies strb not observable before previous ldrb.
+
+	@ Signal that the cluster is being brought up:
+	mov	r0, #INBOUND_COMING_UP
+	strb	r0, [r8, #MCPM_SYNC_CLUSTER_INBOUND]
+	dmb
+
+	@ Any CPU trying to take the cluster into CLUSTER_GOING_DOWN from this
+	@ point onwards will observe INBOUND_COMING_UP and abort.
+
+	@ Wait for any previously-pending cluster teardown operations to abort
+	@ or complete:
+mcpm_teardown_wait:
+	ldrb	r0, [r8, #MCPM_SYNC_CLUSTER_CLUSTER]
+	cmp	r0, #CLUSTER_GOING_DOWN
+	bne	first_man_setup
+	wfe
+	b	mcpm_teardown_wait
+
+first_man_setup:
+	dmb
+
+	@ If the outbound gave up before teardown started, skip cluster setup:
+
+	cmp	r0, #CLUSTER_UP
+	beq	mcpm_setup_leave
+
+	@ power_up_setup is now responsible for setting up the cluster:
+
+	cmp	r7, #0
+	mov	r0, #1		@ second (cluster) affinity level
+	blxne	r7		@ Call power_up_setup if defined
+	dmb
+
+	mov	r0, #CLUSTER_UP
+	strb	r0, [r8, #MCPM_SYNC_CLUSTER_CLUSTER]
+	dmb
+
+mcpm_setup_leave:
+	@ Leave the cluster setup critical section:
+
+	mov	r0, #INBOUND_NOT_COMING_UP
+	strb	r0, [r8, #MCPM_SYNC_CLUSTER_INBOUND]
+	dsb	st
+	sev
+
+	mov	r0, r11
+	bl	vlock_unlock	@ implies DMB
+	b	mcpm_setup_complete
+
+	@ In the contended case, non-first men wait here for cluster setup
+	@ to complete:
+mcpm_setup_wait:
+	ldrb	r0, [r8, #MCPM_SYNC_CLUSTER_CLUSTER]
+	cmp	r0, #CLUSTER_UP
+	wfene
+	bne	mcpm_setup_wait
+	dmb
+
+mcpm_setup_complete:
+	@ If a platform-specific CPU setup hook is needed, it is
+	@ called from here.
+
+	cmp	r7, #0
+	mov	r0, #0		@ first (CPU) affinity level
+	blxne	r7		@ Call power_up_setup if defined
+	dmb
+
+	@ Mark the CPU as up:
+
+	mov	r0, #CPU_UP
+	strb	r0, [r5]
+
+	@ Observability order of CPU_UP and opening of the gate does not matter.
+
+mcpm_entry_gated:
+	ldr	r5, [r6, r4, lsl #2]		@ r5 = CPU entry vector
+	cmp	r5, #0
+	wfeeq
+	beq	mcpm_entry_gated
+	dmb
+
+	pr_dbg	"released\n"
+	bx	r5
+
+	.align	2
+
+3:	.word	mcpm_entry_early_pokes - .
+	.word	mcpm_entry_vectors - 3b
+	.word	mcpm_power_up_setup_phys - 3b
+	.word	mcpm_sync - 3b
+	.word	first_man_locks - 3b
+
+ENDPROC(mcpm_entry_point)
+
+	.bss
+
+	.align	CACHE_WRITEBACK_ORDER
+	.type	first_man_locks, #object
+first_man_locks:
+	.space	VLOCK_SIZE * MAX_NR_CLUSTERS
+	.align	CACHE_WRITEBACK_ORDER
+
+	.type	mcpm_entry_vectors, #object
+ENTRY(mcpm_entry_vectors)
+	.space	4 * MAX_NR_CLUSTERS * MAX_CPUS_PER_CLUSTER
+
+	.type	mcpm_entry_early_pokes, #object
+ENTRY(mcpm_entry_early_pokes)
+	.space	8 * MAX_NR_CLUSTERS * MAX_CPUS_PER_CLUSTER
+
+	.type	mcpm_power_up_setup_phys, #object
+ENTRY(mcpm_power_up_setup_phys)
+	.space  4		@ set by mcpm_sync_init()
diff --git a/arch/arm/common/mcpm_platsmp.c b/arch/arm/common/mcpm_platsmp.c
new file mode 100644
index 000000000..3e172f4b0
--- /dev/null
+++ b/arch/arm/common/mcpm_platsmp.c
@@ -0,0 +1,96 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * linux/arch/arm/mach-vexpress/mcpm_platsmp.c
+ *
+ * Created by:  Nicolas Pitre, November 2012
+ * Copyright:   (C) 2012-2013  Linaro Limited
+ *
+ * Code to handle secondary CPU bringup and hotplug for the cluster power API.
+ */
+
+#include <linux/init.h>
+#include <linux/smp.h>
+#include <linux/spinlock.h>
+
+#include <asm/mcpm.h>
+#include <asm/smp.h>
+#include <asm/smp_plat.h>
+
+static void cpu_to_pcpu(unsigned int cpu,
+			unsigned int *pcpu, unsigned int *pcluster)
+{
+	unsigned int mpidr;
+
+	mpidr = cpu_logical_map(cpu);
+	*pcpu = MPIDR_AFFINITY_LEVEL(mpidr, 0);
+	*pcluster = MPIDR_AFFINITY_LEVEL(mpidr, 1);
+}
+
+static int mcpm_boot_secondary(unsigned int cpu, struct task_struct *idle)
+{
+	unsigned int pcpu, pcluster, ret;
+	extern void secondary_startup(void);
+
+	cpu_to_pcpu(cpu, &pcpu, &pcluster);
+
+	pr_debug("%s: logical CPU %d is physical CPU %d cluster %d\n",
+		 __func__, cpu, pcpu, pcluster);
+
+	mcpm_set_entry_vector(pcpu, pcluster, NULL);
+	ret = mcpm_cpu_power_up(pcpu, pcluster);
+	if (ret)
+		return ret;
+	mcpm_set_entry_vector(pcpu, pcluster, secondary_startup);
+	arch_send_wakeup_ipi_mask(cpumask_of(cpu));
+	dsb_sev();
+	return 0;
+}
+
+static void mcpm_secondary_init(unsigned int cpu)
+{
+	mcpm_cpu_powered_up();
+}
+
+#ifdef CONFIG_HOTPLUG_CPU
+
+static int mcpm_cpu_kill(unsigned int cpu)
+{
+	unsigned int pcpu, pcluster;
+
+	cpu_to_pcpu(cpu, &pcpu, &pcluster);
+
+	return !mcpm_wait_for_cpu_powerdown(pcpu, pcluster);
+}
+
+static bool mcpm_cpu_can_disable(unsigned int cpu)
+{
+	/* We assume all CPUs may be shut down. */
+	return true;
+}
+
+static void mcpm_cpu_die(unsigned int cpu)
+{
+	unsigned int mpidr, pcpu, pcluster;
+	mpidr = read_cpuid_mpidr();
+	pcpu = MPIDR_AFFINITY_LEVEL(mpidr, 0);
+	pcluster = MPIDR_AFFINITY_LEVEL(mpidr, 1);
+	mcpm_set_entry_vector(pcpu, pcluster, NULL);
+	mcpm_cpu_power_down();
+}
+
+#endif
+
+static const struct smp_operations mcpm_smp_ops __initconst = {
+	.smp_boot_secondary	= mcpm_boot_secondary,
+	.smp_secondary_init	= mcpm_secondary_init,
+#ifdef CONFIG_HOTPLUG_CPU
+	.cpu_kill		= mcpm_cpu_kill,
+	.cpu_can_disable	= mcpm_cpu_can_disable,
+	.cpu_die		= mcpm_cpu_die,
+#endif
+};
+
+void __init mcpm_smp_set_ops(void)
+{
+	smp_set_ops(&mcpm_smp_ops);
+}
diff --git a/arch/arm/common/sa1111.c b/arch/arm/common/sa1111.c
new file mode 100644
index 000000000..f5e6990b8
--- /dev/null
+++ b/arch/arm/common/sa1111.c
@@ -0,0 +1,1410 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * linux/arch/arm/common/sa1111.c
+ *
+ * SA1111 support
+ *
+ * Original code by John Dorsey
+ *
+ * This file contains all generic SA1111 support.
+ *
+ * All initialization functions provided here are intended to be called
+ * from machine specific code with proper arguments when required.
+ */
+#include <linux/module.h>
+#include <linux/gpio/driver.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/ioport.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/dma-map-ops.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+
+#include <asm/mach/irq.h>
+#include <asm/mach-types.h>
+#include <linux/sizes.h>
+
+#include <asm/hardware/sa1111.h>
+
+#ifdef CONFIG_ARCH_SA1100
+#include <mach/hardware.h>
+#endif
+
+/* SA1111 IRQs */
+#define IRQ_GPAIN0		(0)
+#define IRQ_GPAIN1		(1)
+#define IRQ_GPAIN2		(2)
+#define IRQ_GPAIN3		(3)
+#define IRQ_GPBIN0		(4)
+#define IRQ_GPBIN1		(5)
+#define IRQ_GPBIN2		(6)
+#define IRQ_GPBIN3		(7)
+#define IRQ_GPBIN4		(8)
+#define IRQ_GPBIN5		(9)
+#define IRQ_GPCIN0		(10)
+#define IRQ_GPCIN1		(11)
+#define IRQ_GPCIN2		(12)
+#define IRQ_GPCIN3		(13)
+#define IRQ_GPCIN4		(14)
+#define IRQ_GPCIN5		(15)
+#define IRQ_GPCIN6		(16)
+#define IRQ_GPCIN7		(17)
+#define IRQ_MSTXINT		(18)
+#define IRQ_MSRXINT		(19)
+#define IRQ_MSSTOPERRINT	(20)
+#define IRQ_TPTXINT		(21)
+#define IRQ_TPRXINT		(22)
+#define IRQ_TPSTOPERRINT	(23)
+#define SSPXMTINT		(24)
+#define SSPRCVINT		(25)
+#define SSPROR			(26)
+#define AUDXMTDMADONEA		(32)
+#define AUDRCVDMADONEA		(33)
+#define AUDXMTDMADONEB		(34)
+#define AUDRCVDMADONEB		(35)
+#define AUDTFSR			(36)
+#define AUDRFSR			(37)
+#define AUDTUR			(38)
+#define AUDROR			(39)
+#define AUDDTS			(40)
+#define AUDRDD			(41)
+#define AUDSTO			(42)
+#define IRQ_USBPWR		(43)
+#define IRQ_HCIM		(44)
+#define IRQ_HCIBUFFACC		(45)
+#define IRQ_HCIRMTWKP		(46)
+#define IRQ_NHCIMFCIR		(47)
+#define IRQ_USB_PORT_RESUME	(48)
+#define IRQ_S0_READY_NINT	(49)
+#define IRQ_S1_READY_NINT	(50)
+#define IRQ_S0_CD_VALID		(51)
+#define IRQ_S1_CD_VALID		(52)
+#define IRQ_S0_BVD1_STSCHG	(53)
+#define IRQ_S1_BVD1_STSCHG	(54)
+#define SA1111_IRQ_NR		(55)
+
+extern void sa1110_mb_enable(void);
+extern void sa1110_mb_disable(void);
+
+/*
+ * We keep the following data for the overall SA1111.  Note that the
+ * struct device and struct resource are "fake"; they should be supplied
+ * by the bus above us.  However, in the interests of getting all SA1111
+ * drivers converted over to the device model, we provide this as an
+ * anchor point for all the other drivers.
+ */
+struct sa1111 {
+	struct device	*dev;
+	struct clk	*clk;
+	unsigned long	phys;
+	int		irq;
+	int		irq_base;	/* base for cascaded on-chip IRQs */
+	spinlock_t	lock;
+	void __iomem	*base;
+	struct sa1111_platform_data *pdata;
+	struct irq_domain *irqdomain;
+	struct gpio_chip gc;
+#ifdef CONFIG_PM
+	void		*saved_state;
+#endif
+};
+
+/*
+ * We _really_ need to eliminate this.  Its only users
+ * are the PWM and DMA checking code.
+ */
+static struct sa1111 *g_sa1111;
+
+struct sa1111_dev_info {
+	unsigned long	offset;
+	unsigned long	skpcr_mask;
+	bool		dma;
+	unsigned int	devid;
+	unsigned int	hwirq[6];
+};
+
+static struct sa1111_dev_info sa1111_devices[] = {
+	{
+		.offset		= SA1111_USB,
+		.skpcr_mask	= SKPCR_UCLKEN,
+		.dma		= true,
+		.devid		= SA1111_DEVID_USB,
+		.hwirq = {
+			IRQ_USBPWR,
+			IRQ_HCIM,
+			IRQ_HCIBUFFACC,
+			IRQ_HCIRMTWKP,
+			IRQ_NHCIMFCIR,
+			IRQ_USB_PORT_RESUME
+		},
+	},
+	{
+		.offset		= 0x0600,
+		.skpcr_mask	= SKPCR_I2SCLKEN | SKPCR_L3CLKEN,
+		.dma		= true,
+		.devid		= SA1111_DEVID_SAC,
+		.hwirq = {
+			AUDXMTDMADONEA,
+			AUDXMTDMADONEB,
+			AUDRCVDMADONEA,
+			AUDRCVDMADONEB
+		},
+	},
+	{
+		.offset		= 0x0800,
+		.skpcr_mask	= SKPCR_SCLKEN,
+		.devid		= SA1111_DEVID_SSP,
+	},
+	{
+		.offset		= SA1111_KBD,
+		.skpcr_mask	= SKPCR_PTCLKEN,
+		.devid		= SA1111_DEVID_PS2_KBD,
+		.hwirq = {
+			IRQ_TPRXINT,
+			IRQ_TPTXINT
+		},
+	},
+	{
+		.offset		= SA1111_MSE,
+		.skpcr_mask	= SKPCR_PMCLKEN,
+		.devid		= SA1111_DEVID_PS2_MSE,
+		.hwirq = {
+			IRQ_MSRXINT,
+			IRQ_MSTXINT
+		},
+	},
+	{
+		.offset		= 0x1800,
+		.skpcr_mask	= 0,
+		.devid		= SA1111_DEVID_PCMCIA,
+		.hwirq = {
+			IRQ_S0_READY_NINT,
+			IRQ_S0_CD_VALID,
+			IRQ_S0_BVD1_STSCHG,
+			IRQ_S1_READY_NINT,
+			IRQ_S1_CD_VALID,
+			IRQ_S1_BVD1_STSCHG,
+		},
+	},
+};
+
+static int sa1111_map_irq(struct sa1111 *sachip, irq_hw_number_t hwirq)
+{
+	return irq_create_mapping(sachip->irqdomain, hwirq);
+}
+
+/*
+ * SA1111 interrupt support.  Since clearing an IRQ while there are
+ * active IRQs causes the interrupt output to pulse, the upper levels
+ * will call us again if there are more interrupts to process.
+ */
+static void sa1111_irq_handler(struct irq_desc *desc)
+{
+	unsigned int stat0, stat1, i;
+	struct sa1111 *sachip = irq_desc_get_handler_data(desc);
+	struct irq_domain *irqdomain;
+	void __iomem *mapbase = sachip->base + SA1111_INTC;
+
+	stat0 = readl_relaxed(mapbase + SA1111_INTSTATCLR0);
+	stat1 = readl_relaxed(mapbase + SA1111_INTSTATCLR1);
+
+	writel_relaxed(stat0, mapbase + SA1111_INTSTATCLR0);
+
+	desc->irq_data.chip->irq_ack(&desc->irq_data);
+
+	writel_relaxed(stat1, mapbase + SA1111_INTSTATCLR1);
+
+	if (stat0 == 0 && stat1 == 0) {
+		do_bad_IRQ(desc);
+		return;
+	}
+
+	irqdomain = sachip->irqdomain;
+
+	for (i = 0; stat0; i++, stat0 >>= 1)
+		if (stat0 & 1)
+			generic_handle_domain_irq(irqdomain, i);
+
+	for (i = 32; stat1; i++, stat1 >>= 1)
+		if (stat1 & 1)
+			generic_handle_domain_irq(irqdomain, i);
+
+	/* For level-based interrupts */
+	desc->irq_data.chip->irq_unmask(&desc->irq_data);
+}
+
+static u32 sa1111_irqmask(struct irq_data *d)
+{
+	return BIT(irqd_to_hwirq(d) & 31);
+}
+
+static int sa1111_irqbank(struct irq_data *d)
+{
+	return (irqd_to_hwirq(d) / 32) * 4;
+}
+
+static void sa1111_ack_irq(struct irq_data *d)
+{
+}
+
+static void sa1111_mask_irq(struct irq_data *d)
+{
+	struct sa1111 *sachip = irq_data_get_irq_chip_data(d);
+	void __iomem *mapbase = sachip->base + SA1111_INTC + sa1111_irqbank(d);
+	u32 ie;
+
+	ie = readl_relaxed(mapbase + SA1111_INTEN0);
+	ie &= ~sa1111_irqmask(d);
+	writel(ie, mapbase + SA1111_INTEN0);
+}
+
+static void sa1111_unmask_irq(struct irq_data *d)
+{
+	struct sa1111 *sachip = irq_data_get_irq_chip_data(d);
+	void __iomem *mapbase = sachip->base + SA1111_INTC + sa1111_irqbank(d);
+	u32 ie;
+
+	ie = readl_relaxed(mapbase + SA1111_INTEN0);
+	ie |= sa1111_irqmask(d);
+	writel_relaxed(ie, mapbase + SA1111_INTEN0);
+}
+
+/*
+ * Attempt to re-trigger the interrupt.  The SA1111 contains a register
+ * (INTSET) which claims to do this.  However, in practice no amount of
+ * manipulation of INTEN and INTSET guarantees that the interrupt will
+ * be triggered.  In fact, its very difficult, if not impossible to get
+ * INTSET to re-trigger the interrupt.
+ */
+static int sa1111_retrigger_irq(struct irq_data *d)
+{
+	struct sa1111 *sachip = irq_data_get_irq_chip_data(d);
+	void __iomem *mapbase = sachip->base + SA1111_INTC + sa1111_irqbank(d);
+	u32 ip, mask = sa1111_irqmask(d);
+	int i;
+
+	ip = readl_relaxed(mapbase + SA1111_INTPOL0);
+	for (i = 0; i < 8; i++) {
+		writel_relaxed(ip ^ mask, mapbase + SA1111_INTPOL0);
+		writel_relaxed(ip, mapbase + SA1111_INTPOL0);
+		if (readl_relaxed(mapbase + SA1111_INTSTATCLR0) & mask)
+			break;
+	}
+
+	if (i == 8) {
+		pr_err("Danger Will Robinson: failed to re-trigger IRQ%d\n",
+		       d->irq);
+		return 0;
+	}
+
+	return 1;
+}
+
+static int sa1111_type_irq(struct irq_data *d, unsigned int flags)
+{
+	struct sa1111 *sachip = irq_data_get_irq_chip_data(d);
+	void __iomem *mapbase = sachip->base + SA1111_INTC + sa1111_irqbank(d);
+	u32 ip, mask = sa1111_irqmask(d);
+
+	if (flags == IRQ_TYPE_PROBE)
+		return 0;
+
+	if ((!(flags & IRQ_TYPE_EDGE_RISING) ^ !(flags & IRQ_TYPE_EDGE_FALLING)) == 0)
+		return -EINVAL;
+
+	ip = readl_relaxed(mapbase + SA1111_INTPOL0);
+	if (flags & IRQ_TYPE_EDGE_RISING)
+		ip &= ~mask;
+	else
+		ip |= mask;
+	writel_relaxed(ip, mapbase + SA1111_INTPOL0);
+	writel_relaxed(ip, mapbase + SA1111_WAKEPOL0);
+
+	return 0;
+}
+
+static int sa1111_wake_irq(struct irq_data *d, unsigned int on)
+{
+	struct sa1111 *sachip = irq_data_get_irq_chip_data(d);
+	void __iomem *mapbase = sachip->base + SA1111_INTC + sa1111_irqbank(d);
+	u32 we, mask = sa1111_irqmask(d);
+
+	we = readl_relaxed(mapbase + SA1111_WAKEEN0);
+	if (on)
+		we |= mask;
+	else
+		we &= ~mask;
+	writel_relaxed(we, mapbase + SA1111_WAKEEN0);
+
+	return 0;
+}
+
+static struct irq_chip sa1111_irq_chip = {
+	.name		= "SA1111",
+	.irq_ack	= sa1111_ack_irq,
+	.irq_mask	= sa1111_mask_irq,
+	.irq_unmask	= sa1111_unmask_irq,
+	.irq_retrigger	= sa1111_retrigger_irq,
+	.irq_set_type	= sa1111_type_irq,
+	.irq_set_wake	= sa1111_wake_irq,
+};
+
+static int sa1111_irqdomain_map(struct irq_domain *d, unsigned int irq,
+	irq_hw_number_t hwirq)
+{
+	struct sa1111 *sachip = d->host_data;
+
+	/* Disallow unavailable interrupts */
+	if (hwirq > SSPROR && hwirq < AUDXMTDMADONEA)
+		return -EINVAL;
+
+	irq_set_chip_data(irq, sachip);
+	irq_set_chip_and_handler(irq, &sa1111_irq_chip, handle_edge_irq);
+	irq_clear_status_flags(irq, IRQ_NOREQUEST | IRQ_NOPROBE);
+
+	return 0;
+}
+
+static const struct irq_domain_ops sa1111_irqdomain_ops = {
+	.map = sa1111_irqdomain_map,
+	.xlate = irq_domain_xlate_twocell,
+};
+
+static int sa1111_setup_irq(struct sa1111 *sachip, unsigned irq_base)
+{
+	void __iomem *irqbase = sachip->base + SA1111_INTC;
+	int ret;
+
+	/*
+	 * We're guaranteed that this region hasn't been taken.
+	 */
+	request_mem_region(sachip->phys + SA1111_INTC, 512, "irq");
+
+	ret = irq_alloc_descs(-1, irq_base, SA1111_IRQ_NR, -1);
+	if (ret <= 0) {
+		dev_err(sachip->dev, "unable to allocate %u irqs: %d\n",
+			SA1111_IRQ_NR, ret);
+		if (ret == 0)
+			ret = -EINVAL;
+		return ret;
+	}
+
+	sachip->irq_base = ret;
+
+	/* disable all IRQs */
+	writel_relaxed(0, irqbase + SA1111_INTEN0);
+	writel_relaxed(0, irqbase + SA1111_INTEN1);
+	writel_relaxed(0, irqbase + SA1111_WAKEEN0);
+	writel_relaxed(0, irqbase + SA1111_WAKEEN1);
+
+	/*
+	 * detect on rising edge.  Note: Feb 2001 Errata for SA1111
+	 * specifies that S0ReadyInt and S1ReadyInt should be '1'.
+	 */
+	writel_relaxed(0, irqbase + SA1111_INTPOL0);
+	writel_relaxed(BIT(IRQ_S0_READY_NINT & 31) |
+		       BIT(IRQ_S1_READY_NINT & 31),
+		       irqbase + SA1111_INTPOL1);
+
+	/* clear all IRQs */
+	writel_relaxed(~0, irqbase + SA1111_INTSTATCLR0);
+	writel_relaxed(~0, irqbase + SA1111_INTSTATCLR1);
+
+	sachip->irqdomain = irq_domain_add_linear(NULL, SA1111_IRQ_NR,
+						  &sa1111_irqdomain_ops,
+						  sachip);
+	if (!sachip->irqdomain) {
+		irq_free_descs(sachip->irq_base, SA1111_IRQ_NR);
+		return -ENOMEM;
+	}
+
+	irq_domain_associate_many(sachip->irqdomain,
+				  sachip->irq_base + IRQ_GPAIN0,
+				  IRQ_GPAIN0, SSPROR + 1 - IRQ_GPAIN0);
+	irq_domain_associate_many(sachip->irqdomain,
+				  sachip->irq_base + AUDXMTDMADONEA,
+				  AUDXMTDMADONEA,
+				  IRQ_S1_BVD1_STSCHG + 1 - AUDXMTDMADONEA);
+
+	/*
+	 * Register SA1111 interrupt
+	 */
+	irq_set_irq_type(sachip->irq, IRQ_TYPE_EDGE_RISING);
+	irq_set_chained_handler_and_data(sachip->irq, sa1111_irq_handler,
+					 sachip);
+
+	dev_info(sachip->dev, "Providing IRQ%u-%u\n",
+		sachip->irq_base, sachip->irq_base + SA1111_IRQ_NR - 1);
+
+	return 0;
+}
+
+static void sa1111_remove_irq(struct sa1111 *sachip)
+{
+	struct irq_domain *domain = sachip->irqdomain;
+	void __iomem *irqbase = sachip->base + SA1111_INTC;
+	int i;
+
+	/* disable all IRQs */
+	writel_relaxed(0, irqbase + SA1111_INTEN0);
+	writel_relaxed(0, irqbase + SA1111_INTEN1);
+	writel_relaxed(0, irqbase + SA1111_WAKEEN0);
+	writel_relaxed(0, irqbase + SA1111_WAKEEN1);
+
+	irq_set_chained_handler_and_data(sachip->irq, NULL, NULL);
+	for (i = 0; i < SA1111_IRQ_NR; i++)
+		irq_dispose_mapping(irq_find_mapping(domain, i));
+	irq_domain_remove(domain);
+
+	release_mem_region(sachip->phys + SA1111_INTC, 512);
+}
+
+enum {
+	SA1111_GPIO_PXDDR = (SA1111_GPIO_PADDR - SA1111_GPIO_PADDR),
+	SA1111_GPIO_PXDRR = (SA1111_GPIO_PADRR - SA1111_GPIO_PADDR),
+	SA1111_GPIO_PXDWR = (SA1111_GPIO_PADWR - SA1111_GPIO_PADDR),
+	SA1111_GPIO_PXSDR = (SA1111_GPIO_PASDR - SA1111_GPIO_PADDR),
+	SA1111_GPIO_PXSSR = (SA1111_GPIO_PASSR - SA1111_GPIO_PADDR),
+};
+
+static struct sa1111 *gc_to_sa1111(struct gpio_chip *gc)
+{
+	return container_of(gc, struct sa1111, gc);
+}
+
+static void __iomem *sa1111_gpio_map_reg(struct sa1111 *sachip, unsigned offset)
+{
+	void __iomem *reg = sachip->base + SA1111_GPIO;
+
+	if (offset < 4)
+		return reg + SA1111_GPIO_PADDR;
+	if (offset < 10)
+		return reg + SA1111_GPIO_PBDDR;
+	if (offset < 18)
+		return reg + SA1111_GPIO_PCDDR;
+	return NULL;
+}
+
+static u32 sa1111_gpio_map_bit(unsigned offset)
+{
+	if (offset < 4)
+		return BIT(offset);
+	if (offset < 10)
+		return BIT(offset - 4);
+	if (offset < 18)
+		return BIT(offset - 10);
+	return 0;
+}
+
+static void sa1111_gpio_modify(void __iomem *reg, u32 mask, u32 set)
+{
+	u32 val;
+
+	val = readl_relaxed(reg);
+	val &= ~mask;
+	val |= mask & set;
+	writel_relaxed(val, reg);
+}
+
+static int sa1111_gpio_get_direction(struct gpio_chip *gc, unsigned offset)
+{
+	struct sa1111 *sachip = gc_to_sa1111(gc);
+	void __iomem *reg = sa1111_gpio_map_reg(sachip, offset);
+	u32 mask = sa1111_gpio_map_bit(offset);
+
+	return !!(readl_relaxed(reg + SA1111_GPIO_PXDDR) & mask);
+}
+
+static int sa1111_gpio_direction_input(struct gpio_chip *gc, unsigned offset)
+{
+	struct sa1111 *sachip = gc_to_sa1111(gc);
+	unsigned long flags;
+	void __iomem *reg = sa1111_gpio_map_reg(sachip, offset);
+	u32 mask = sa1111_gpio_map_bit(offset);
+
+	spin_lock_irqsave(&sachip->lock, flags);
+	sa1111_gpio_modify(reg + SA1111_GPIO_PXDDR, mask, mask);
+	sa1111_gpio_modify(reg + SA1111_GPIO_PXSDR, mask, mask);
+	spin_unlock_irqrestore(&sachip->lock, flags);
+
+	return 0;
+}
+
+static int sa1111_gpio_direction_output(struct gpio_chip *gc, unsigned offset,
+	int value)
+{
+	struct sa1111 *sachip = gc_to_sa1111(gc);
+	unsigned long flags;
+	void __iomem *reg = sa1111_gpio_map_reg(sachip, offset);
+	u32 mask = sa1111_gpio_map_bit(offset);
+
+	spin_lock_irqsave(&sachip->lock, flags);
+	sa1111_gpio_modify(reg + SA1111_GPIO_PXDWR, mask, value ? mask : 0);
+	sa1111_gpio_modify(reg + SA1111_GPIO_PXSSR, mask, value ? mask : 0);
+	sa1111_gpio_modify(reg + SA1111_GPIO_PXDDR, mask, 0);
+	sa1111_gpio_modify(reg + SA1111_GPIO_PXSDR, mask, 0);
+	spin_unlock_irqrestore(&sachip->lock, flags);
+
+	return 0;
+}
+
+static int sa1111_gpio_get(struct gpio_chip *gc, unsigned offset)
+{
+	struct sa1111 *sachip = gc_to_sa1111(gc);
+	void __iomem *reg = sa1111_gpio_map_reg(sachip, offset);
+	u32 mask = sa1111_gpio_map_bit(offset);
+
+	return !!(readl_relaxed(reg + SA1111_GPIO_PXDRR) & mask);
+}
+
+static void sa1111_gpio_set(struct gpio_chip *gc, unsigned offset, int value)
+{
+	struct sa1111 *sachip = gc_to_sa1111(gc);
+	unsigned long flags;
+	void __iomem *reg = sa1111_gpio_map_reg(sachip, offset);
+	u32 mask = sa1111_gpio_map_bit(offset);
+
+	spin_lock_irqsave(&sachip->lock, flags);
+	sa1111_gpio_modify(reg + SA1111_GPIO_PXDWR, mask, value ? mask : 0);
+	sa1111_gpio_modify(reg + SA1111_GPIO_PXSSR, mask, value ? mask : 0);
+	spin_unlock_irqrestore(&sachip->lock, flags);
+}
+
+static void sa1111_gpio_set_multiple(struct gpio_chip *gc, unsigned long *mask,
+	unsigned long *bits)
+{
+	struct sa1111 *sachip = gc_to_sa1111(gc);
+	unsigned long flags;
+	void __iomem *reg = sachip->base + SA1111_GPIO;
+	u32 msk, val;
+
+	msk = *mask;
+	val = *bits;
+
+	spin_lock_irqsave(&sachip->lock, flags);
+	sa1111_gpio_modify(reg + SA1111_GPIO_PADWR, msk & 15, val);
+	sa1111_gpio_modify(reg + SA1111_GPIO_PASSR, msk & 15, val);
+	sa1111_gpio_modify(reg + SA1111_GPIO_PBDWR, (msk >> 4) & 255, val >> 4);
+	sa1111_gpio_modify(reg + SA1111_GPIO_PBSSR, (msk >> 4) & 255, val >> 4);
+	sa1111_gpio_modify(reg + SA1111_GPIO_PCDWR, (msk >> 12) & 255, val >> 12);
+	sa1111_gpio_modify(reg + SA1111_GPIO_PCSSR, (msk >> 12) & 255, val >> 12);
+	spin_unlock_irqrestore(&sachip->lock, flags);
+}
+
+static int sa1111_gpio_to_irq(struct gpio_chip *gc, unsigned offset)
+{
+	struct sa1111 *sachip = gc_to_sa1111(gc);
+
+	return sa1111_map_irq(sachip, offset);
+}
+
+static int sa1111_setup_gpios(struct sa1111 *sachip)
+{
+	sachip->gc.label = "sa1111";
+	sachip->gc.parent = sachip->dev;
+	sachip->gc.owner = THIS_MODULE;
+	sachip->gc.get_direction = sa1111_gpio_get_direction;
+	sachip->gc.direction_input = sa1111_gpio_direction_input;
+	sachip->gc.direction_output = sa1111_gpio_direction_output;
+	sachip->gc.get = sa1111_gpio_get;
+	sachip->gc.set = sa1111_gpio_set;
+	sachip->gc.set_multiple = sa1111_gpio_set_multiple;
+	sachip->gc.to_irq = sa1111_gpio_to_irq;
+	sachip->gc.base = -1;
+	sachip->gc.ngpio = 18;
+
+	return devm_gpiochip_add_data(sachip->dev, &sachip->gc, sachip);
+}
+
+/*
+ * Bring the SA1111 out of reset.  This requires a set procedure:
+ *  1. nRESET asserted (by hardware)
+ *  2. CLK turned on from SA1110
+ *  3. nRESET deasserted
+ *  4. VCO turned on, PLL_BYPASS turned off
+ *  5. Wait lock time, then assert RCLKEn
+ *  7. PCR set to allow clocking of individual functions
+ *
+ * Until we've done this, the only registers we can access are:
+ *   SBI_SKCR
+ *   SBI_SMCR
+ *   SBI_SKID
+ */
+static void sa1111_wake(struct sa1111 *sachip)
+{
+	unsigned long flags, r;
+
+	spin_lock_irqsave(&sachip->lock, flags);
+
+	clk_enable(sachip->clk);
+
+	/*
+	 * Turn VCO on, and disable PLL Bypass.
+	 */
+	r = readl_relaxed(sachip->base + SA1111_SKCR);
+	r &= ~SKCR_VCO_OFF;
+	writel_relaxed(r, sachip->base + SA1111_SKCR);
+	r |= SKCR_PLL_BYPASS | SKCR_OE_EN;
+	writel_relaxed(r, sachip->base + SA1111_SKCR);
+
+	/*
+	 * Wait lock time.  SA1111 manual _doesn't_
+	 * specify a figure for this!  We choose 100us.
+	 */
+	udelay(100);
+
+	/*
+	 * Enable RCLK.  We also ensure that RDYEN is set.
+	 */
+	r |= SKCR_RCLKEN | SKCR_RDYEN;
+	writel_relaxed(r, sachip->base + SA1111_SKCR);
+
+	/*
+	 * Wait 14 RCLK cycles for the chip to finish coming out
+	 * of reset. (RCLK=24MHz).  This is 590ns.
+	 */
+	udelay(1);
+
+	/*
+	 * Ensure all clocks are initially off.
+	 */
+	writel_relaxed(0, sachip->base + SA1111_SKPCR);
+
+	spin_unlock_irqrestore(&sachip->lock, flags);
+}
+
+#ifdef CONFIG_ARCH_SA1100
+
+static u32 sa1111_dma_mask[] = {
+	~0,
+	~(1 << 20),
+	~(1 << 23),
+	~(1 << 24),
+	~(1 << 25),
+	~(1 << 20),
+	~(1 << 20),
+	0,
+};
+
+/*
+ * Configure the SA1111 shared memory controller.
+ */
+void
+sa1111_configure_smc(struct sa1111 *sachip, int sdram, unsigned int drac,
+		     unsigned int cas_latency)
+{
+	unsigned int smcr = SMCR_DTIM | SMCR_MBGE | FInsrt(drac, SMCR_DRAC);
+
+	if (cas_latency == 3)
+		smcr |= SMCR_CLAT;
+
+	writel_relaxed(smcr, sachip->base + SA1111_SMCR);
+
+	/*
+	 * Now clear the bits in the DMA mask to work around the SA1111
+	 * DMA erratum (Intel StrongARM SA-1111 Microprocessor Companion
+	 * Chip Specification Update, June 2000, Erratum #7).
+	 */
+	if (sachip->dev->dma_mask)
+		*sachip->dev->dma_mask &= sa1111_dma_mask[drac >> 2];
+
+	sachip->dev->coherent_dma_mask &= sa1111_dma_mask[drac >> 2];
+}
+#endif
+
+static void sa1111_dev_release(struct device *_dev)
+{
+	struct sa1111_dev *dev = to_sa1111_device(_dev);
+
+	kfree(dev);
+}
+
+static int
+sa1111_init_one_child(struct sa1111 *sachip, struct resource *parent,
+		      struct sa1111_dev_info *info)
+{
+	struct sa1111_dev *dev;
+	unsigned i;
+	int ret;
+
+	dev = kzalloc(sizeof(struct sa1111_dev), GFP_KERNEL);
+	if (!dev) {
+		ret = -ENOMEM;
+		goto err_alloc;
+	}
+
+	device_initialize(&dev->dev);
+	dev_set_name(&dev->dev, "%4.4lx", info->offset);
+	dev->devid	 = info->devid;
+	dev->dev.parent  = sachip->dev;
+	dev->dev.bus     = &sa1111_bus_type;
+	dev->dev.release = sa1111_dev_release;
+	dev->res.start   = sachip->phys + info->offset;
+	dev->res.end     = dev->res.start + 511;
+	dev->res.name    = dev_name(&dev->dev);
+	dev->res.flags   = IORESOURCE_MEM;
+	dev->mapbase     = sachip->base + info->offset;
+	dev->skpcr_mask  = info->skpcr_mask;
+
+	for (i = 0; i < ARRAY_SIZE(info->hwirq); i++)
+		dev->hwirq[i] = info->hwirq[i];
+
+	/*
+	 * If the parent device has a DMA mask associated with it, and
+	 * this child supports DMA, propagate it down to the children.
+	 */
+	if (info->dma && sachip->dev->dma_mask) {
+		dev->dma_mask = *sachip->dev->dma_mask;
+		dev->dev.dma_mask = &dev->dma_mask;
+		dev->dev.coherent_dma_mask = sachip->dev->coherent_dma_mask;
+	}
+
+	ret = request_resource(parent, &dev->res);
+	if (ret) {
+		dev_err(sachip->dev, "failed to allocate resource for %s\n",
+			dev->res.name);
+		goto err_resource;
+	}
+
+	ret = device_add(&dev->dev);
+	if (ret)
+		goto err_add;
+	return 0;
+
+ err_add:
+	release_resource(&dev->res);
+ err_resource:
+	put_device(&dev->dev);
+ err_alloc:
+	return ret;
+}
+
+/**
+ *	sa1111_probe - probe for a single SA1111 chip.
+ *	@phys_addr: physical address of device.
+ *
+ *	Probe for a SA1111 chip.  This must be called
+ *	before any other SA1111-specific code.
+ *
+ *	Returns:
+ *	%-ENODEV	device not found.
+ *	%-EBUSY		physical address already marked in-use.
+ *	%-EINVAL	no platform data passed
+ *	%0		successful.
+ */
+static int __sa1111_probe(struct device *me, struct resource *mem, int irq)
+{
+	struct sa1111_platform_data *pd = me->platform_data;
+	struct sa1111 *sachip;
+	unsigned long id;
+	unsigned int has_devs;
+	int i, ret = -ENODEV;
+
+	if (!pd)
+		return -EINVAL;
+
+	sachip = devm_kzalloc(me, sizeof(struct sa1111), GFP_KERNEL);
+	if (!sachip)
+		return -ENOMEM;
+
+	sachip->clk = devm_clk_get(me, "SA1111_CLK");
+	if (IS_ERR(sachip->clk))
+		return PTR_ERR(sachip->clk);
+
+	ret = clk_prepare(sachip->clk);
+	if (ret)
+		return ret;
+
+	spin_lock_init(&sachip->lock);
+
+	sachip->dev = me;
+	dev_set_drvdata(sachip->dev, sachip);
+
+	sachip->pdata = pd;
+	sachip->phys = mem->start;
+	sachip->irq = irq;
+
+	/*
+	 * Map the whole region.  This also maps the
+	 * registers for our children.
+	 */
+	sachip->base = ioremap(mem->start, PAGE_SIZE * 2);
+	if (!sachip->base) {
+		ret = -ENOMEM;
+		goto err_clk_unprep;
+	}
+
+	/*
+	 * Probe for the chip.  Only touch the SBI registers.
+	 */
+	id = readl_relaxed(sachip->base + SA1111_SKID);
+	if ((id & SKID_ID_MASK) != SKID_SA1111_ID) {
+		printk(KERN_DEBUG "SA1111 not detected: ID = %08lx\n", id);
+		ret = -ENODEV;
+		goto err_unmap;
+	}
+
+	pr_info("SA1111 Microprocessor Companion Chip: silicon revision %lx, metal revision %lx\n",
+		(id & SKID_SIREV_MASK) >> 4, id & SKID_MTREV_MASK);
+
+	/*
+	 * We found it.  Wake the chip up, and initialise.
+	 */
+	sa1111_wake(sachip);
+
+	/*
+	 * The interrupt controller must be initialised before any
+	 * other device to ensure that the interrupts are available.
+	 */
+	ret = sa1111_setup_irq(sachip, pd->irq_base);
+	if (ret)
+		goto err_clk;
+
+	/* Setup the GPIOs - should really be done after the IRQ setup */
+	ret = sa1111_setup_gpios(sachip);
+	if (ret)
+		goto err_irq;
+
+#ifdef CONFIG_ARCH_SA1100
+	{
+	unsigned int val;
+
+	/*
+	 * The SDRAM configuration of the SA1110 and the SA1111 must
+	 * match.  This is very important to ensure that SA1111 accesses
+	 * don't corrupt the SDRAM.  Note that this ungates the SA1111's
+	 * MBGNT signal, so we must have called sa1110_mb_disable()
+	 * beforehand.
+	 */
+	sa1111_configure_smc(sachip, 1,
+			     FExtr(MDCNFG, MDCNFG_SA1110_DRAC0),
+			     FExtr(MDCNFG, MDCNFG_SA1110_TDL0));
+
+	/*
+	 * We only need to turn on DCLK whenever we want to use the
+	 * DMA.  It can otherwise be held firmly in the off position.
+	 * (currently, we always enable it.)
+	 */
+	val = readl_relaxed(sachip->base + SA1111_SKPCR);
+	writel_relaxed(val | SKPCR_DCLKEN, sachip->base + SA1111_SKPCR);
+
+	/*
+	 * Enable the SA1110 memory bus request and grant signals.
+	 */
+	sa1110_mb_enable();
+	}
+#endif
+
+	g_sa1111 = sachip;
+
+	has_devs = ~0;
+	if (pd)
+		has_devs &= ~pd->disable_devs;
+
+	for (i = 0; i < ARRAY_SIZE(sa1111_devices); i++)
+		if (sa1111_devices[i].devid & has_devs)
+			sa1111_init_one_child(sachip, mem, &sa1111_devices[i]);
+
+	return 0;
+
+ err_irq:
+	sa1111_remove_irq(sachip);
+ err_clk:
+	clk_disable(sachip->clk);
+ err_unmap:
+	iounmap(sachip->base);
+ err_clk_unprep:
+	clk_unprepare(sachip->clk);
+	return ret;
+}
+
+static int sa1111_remove_one(struct device *dev, void *data)
+{
+	struct sa1111_dev *sadev = to_sa1111_device(dev);
+	if (dev->bus != &sa1111_bus_type)
+		return 0;
+	device_del(&sadev->dev);
+	release_resource(&sadev->res);
+	put_device(&sadev->dev);
+	return 0;
+}
+
+static void __sa1111_remove(struct sa1111 *sachip)
+{
+	device_for_each_child(sachip->dev, NULL, sa1111_remove_one);
+
+	sa1111_remove_irq(sachip);
+
+	clk_disable(sachip->clk);
+	clk_unprepare(sachip->clk);
+
+	iounmap(sachip->base);
+}
+
+struct sa1111_save_data {
+	unsigned int	skcr;
+	unsigned int	skpcr;
+	unsigned int	skcdr;
+	unsigned char	skaud;
+	unsigned char	skpwm0;
+	unsigned char	skpwm1;
+
+	/*
+	 * Interrupt controller
+	 */
+	unsigned int	intpol0;
+	unsigned int	intpol1;
+	unsigned int	inten0;
+	unsigned int	inten1;
+	unsigned int	wakepol0;
+	unsigned int	wakepol1;
+	unsigned int	wakeen0;
+	unsigned int	wakeen1;
+};
+
+#ifdef CONFIG_PM
+
+static int sa1111_suspend_noirq(struct device *dev)
+{
+	struct sa1111 *sachip = dev_get_drvdata(dev);
+	struct sa1111_save_data *save;
+	unsigned long flags;
+	unsigned int val;
+	void __iomem *base;
+
+	save = kmalloc(sizeof(struct sa1111_save_data), GFP_KERNEL);
+	if (!save)
+		return -ENOMEM;
+	sachip->saved_state = save;
+
+	spin_lock_irqsave(&sachip->lock, flags);
+
+	/*
+	 * Save state.
+	 */
+	base = sachip->base;
+	save->skcr     = readl_relaxed(base + SA1111_SKCR);
+	save->skpcr    = readl_relaxed(base + SA1111_SKPCR);
+	save->skcdr    = readl_relaxed(base + SA1111_SKCDR);
+	save->skaud    = readl_relaxed(base + SA1111_SKAUD);
+	save->skpwm0   = readl_relaxed(base + SA1111_SKPWM0);
+	save->skpwm1   = readl_relaxed(base + SA1111_SKPWM1);
+
+	writel_relaxed(0, sachip->base + SA1111_SKPWM0);
+	writel_relaxed(0, sachip->base + SA1111_SKPWM1);
+
+	base = sachip->base + SA1111_INTC;
+	save->intpol0  = readl_relaxed(base + SA1111_INTPOL0);
+	save->intpol1  = readl_relaxed(base + SA1111_INTPOL1);
+	save->inten0   = readl_relaxed(base + SA1111_INTEN0);
+	save->inten1   = readl_relaxed(base + SA1111_INTEN1);
+	save->wakepol0 = readl_relaxed(base + SA1111_WAKEPOL0);
+	save->wakepol1 = readl_relaxed(base + SA1111_WAKEPOL1);
+	save->wakeen0  = readl_relaxed(base + SA1111_WAKEEN0);
+	save->wakeen1  = readl_relaxed(base + SA1111_WAKEEN1);
+
+	/*
+	 * Disable.
+	 */
+	val = readl_relaxed(sachip->base + SA1111_SKCR);
+	writel_relaxed(val | SKCR_SLEEP, sachip->base + SA1111_SKCR);
+
+	clk_disable(sachip->clk);
+
+	spin_unlock_irqrestore(&sachip->lock, flags);
+
+#ifdef CONFIG_ARCH_SA1100
+	sa1110_mb_disable();
+#endif
+
+	return 0;
+}
+
+/*
+ *	sa1111_resume - Restore the SA1111 device state.
+ *	@dev: device to restore
+ *
+ *	Restore the general state of the SA1111; clock control and
+ *	interrupt controller.  Other parts of the SA1111 must be
+ *	restored by their respective drivers, and must be called
+ *	via LDM after this function.
+ */
+static int sa1111_resume_noirq(struct device *dev)
+{
+	struct sa1111 *sachip = dev_get_drvdata(dev);
+	struct sa1111_save_data *save;
+	unsigned long flags, id;
+	void __iomem *base;
+
+	save = sachip->saved_state;
+	if (!save)
+		return 0;
+
+	/*
+	 * Ensure that the SA1111 is still here.
+	 * FIXME: shouldn't do this here.
+	 */
+	id = readl_relaxed(sachip->base + SA1111_SKID);
+	if ((id & SKID_ID_MASK) != SKID_SA1111_ID) {
+		__sa1111_remove(sachip);
+		dev_set_drvdata(dev, NULL);
+		kfree(save);
+		return 0;
+	}
+
+	/*
+	 * First of all, wake up the chip.
+	 */
+	sa1111_wake(sachip);
+
+#ifdef CONFIG_ARCH_SA1100
+	/* Enable the memory bus request/grant signals */
+	sa1110_mb_enable();
+#endif
+
+	/*
+	 * Only lock for write ops. Also, sa1111_wake must be called with
+	 * released spinlock!
+	 */
+	spin_lock_irqsave(&sachip->lock, flags);
+
+	writel_relaxed(0, sachip->base + SA1111_INTC + SA1111_INTEN0);
+	writel_relaxed(0, sachip->base + SA1111_INTC + SA1111_INTEN1);
+
+	base = sachip->base;
+	writel_relaxed(save->skcr,     base + SA1111_SKCR);
+	writel_relaxed(save->skpcr,    base + SA1111_SKPCR);
+	writel_relaxed(save->skcdr,    base + SA1111_SKCDR);
+	writel_relaxed(save->skaud,    base + SA1111_SKAUD);
+	writel_relaxed(save->skpwm0,   base + SA1111_SKPWM0);
+	writel_relaxed(save->skpwm1,   base + SA1111_SKPWM1);
+
+	base = sachip->base + SA1111_INTC;
+	writel_relaxed(save->intpol0,  base + SA1111_INTPOL0);
+	writel_relaxed(save->intpol1,  base + SA1111_INTPOL1);
+	writel_relaxed(save->inten0,   base + SA1111_INTEN0);
+	writel_relaxed(save->inten1,   base + SA1111_INTEN1);
+	writel_relaxed(save->wakepol0, base + SA1111_WAKEPOL0);
+	writel_relaxed(save->wakepol1, base + SA1111_WAKEPOL1);
+	writel_relaxed(save->wakeen0,  base + SA1111_WAKEEN0);
+	writel_relaxed(save->wakeen1,  base + SA1111_WAKEEN1);
+
+	spin_unlock_irqrestore(&sachip->lock, flags);
+
+	sachip->saved_state = NULL;
+	kfree(save);
+
+	return 0;
+}
+
+#else
+#define sa1111_suspend_noirq NULL
+#define sa1111_resume_noirq  NULL
+#endif
+
+static int sa1111_probe(struct platform_device *pdev)
+{
+	struct resource *mem;
+	int irq;
+
+	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!mem)
+		return -EINVAL;
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0)
+		return irq;
+
+	return __sa1111_probe(&pdev->dev, mem, irq);
+}
+
+static int sa1111_remove(struct platform_device *pdev)
+{
+	struct sa1111 *sachip = platform_get_drvdata(pdev);
+
+	if (sachip) {
+#ifdef CONFIG_PM
+		kfree(sachip->saved_state);
+		sachip->saved_state = NULL;
+#endif
+		__sa1111_remove(sachip);
+		platform_set_drvdata(pdev, NULL);
+	}
+
+	return 0;
+}
+
+static struct dev_pm_ops sa1111_pm_ops = {
+	.suspend_noirq = sa1111_suspend_noirq,
+	.resume_noirq = sa1111_resume_noirq,
+};
+
+/*
+ *	Not sure if this should be on the system bus or not yet.
+ *	We really want some way to register a system device at
+ *	the per-machine level, and then have this driver pick
+ *	up the registered devices.
+ *
+ *	We also need to handle the SDRAM configuration for
+ *	PXA250/SA1110 machine classes.
+ */
+static struct platform_driver sa1111_device_driver = {
+	.probe		= sa1111_probe,
+	.remove		= sa1111_remove,
+	.driver		= {
+		.name	= "sa1111",
+		.pm	= &sa1111_pm_ops,
+	},
+};
+
+/*
+ *	Get the parent device driver (us) structure
+ *	from a child function device
+ */
+static inline struct sa1111 *sa1111_chip_driver(struct sa1111_dev *sadev)
+{
+	return (struct sa1111 *)dev_get_drvdata(sadev->dev.parent);
+}
+
+/*
+ * The bits in the opdiv field are non-linear.
+ */
+static unsigned char opdiv_table[] = { 1, 4, 2, 8 };
+
+static unsigned int __sa1111_pll_clock(struct sa1111 *sachip)
+{
+	unsigned int skcdr, fbdiv, ipdiv, opdiv;
+
+	skcdr = readl_relaxed(sachip->base + SA1111_SKCDR);
+
+	fbdiv = (skcdr & 0x007f) + 2;
+	ipdiv = ((skcdr & 0x0f80) >> 7) + 2;
+	opdiv = opdiv_table[(skcdr & 0x3000) >> 12];
+
+	return 3686400 * fbdiv / (ipdiv * opdiv);
+}
+
+/**
+ *	sa1111_pll_clock - return the current PLL clock frequency.
+ *	@sadev: SA1111 function block
+ *
+ *	BUG: we should look at SKCR.  We also blindly believe that
+ *	the chip is being fed with the 3.6864MHz clock.
+ *
+ *	Returns the PLL clock in Hz.
+ */
+unsigned int sa1111_pll_clock(struct sa1111_dev *sadev)
+{
+	struct sa1111 *sachip = sa1111_chip_driver(sadev);
+
+	return __sa1111_pll_clock(sachip);
+}
+EXPORT_SYMBOL(sa1111_pll_clock);
+
+/**
+ *	sa1111_select_audio_mode - select I2S or AC link mode
+ *	@sadev: SA1111 function block
+ *	@mode: One of %SA1111_AUDIO_ACLINK or %SA1111_AUDIO_I2S
+ *
+ *	Frob the SKCR to select AC Link mode or I2S mode for
+ *	the audio block.
+ */
+void sa1111_select_audio_mode(struct sa1111_dev *sadev, int mode)
+{
+	struct sa1111 *sachip = sa1111_chip_driver(sadev);
+	unsigned long flags;
+	unsigned int val;
+
+	spin_lock_irqsave(&sachip->lock, flags);
+
+	val = readl_relaxed(sachip->base + SA1111_SKCR);
+	if (mode == SA1111_AUDIO_I2S) {
+		val &= ~SKCR_SELAC;
+	} else {
+		val |= SKCR_SELAC;
+	}
+	writel_relaxed(val, sachip->base + SA1111_SKCR);
+
+	spin_unlock_irqrestore(&sachip->lock, flags);
+}
+EXPORT_SYMBOL(sa1111_select_audio_mode);
+
+/**
+ *	sa1111_set_audio_rate - set the audio sample rate
+ *	@sadev: SA1111 SAC function block
+ *	@rate: sample rate to select
+ */
+int sa1111_set_audio_rate(struct sa1111_dev *sadev, int rate)
+{
+	struct sa1111 *sachip = sa1111_chip_driver(sadev);
+	unsigned int div;
+
+	if (sadev->devid != SA1111_DEVID_SAC)
+		return -EINVAL;
+
+	div = (__sa1111_pll_clock(sachip) / 256 + rate / 2) / rate;
+	if (div == 0)
+		div = 1;
+	if (div > 128)
+		div = 128;
+
+	writel_relaxed(div - 1, sachip->base + SA1111_SKAUD);
+
+	return 0;
+}
+EXPORT_SYMBOL(sa1111_set_audio_rate);
+
+/**
+ *	sa1111_get_audio_rate - get the audio sample rate
+ *	@sadev: SA1111 SAC function block device
+ */
+int sa1111_get_audio_rate(struct sa1111_dev *sadev)
+{
+	struct sa1111 *sachip = sa1111_chip_driver(sadev);
+	unsigned long div;
+
+	if (sadev->devid != SA1111_DEVID_SAC)
+		return -EINVAL;
+
+	div = readl_relaxed(sachip->base + SA1111_SKAUD) + 1;
+
+	return __sa1111_pll_clock(sachip) / (256 * div);
+}
+EXPORT_SYMBOL(sa1111_get_audio_rate);
+
+/*
+ * Individual device operations.
+ */
+
+/**
+ *	sa1111_enable_device - enable an on-chip SA1111 function block
+ *	@sadev: SA1111 function block device to enable
+ */
+int sa1111_enable_device(struct sa1111_dev *sadev)
+{
+	struct sa1111 *sachip = sa1111_chip_driver(sadev);
+	unsigned long flags;
+	unsigned int val;
+	int ret = 0;
+
+	if (sachip->pdata && sachip->pdata->enable)
+		ret = sachip->pdata->enable(sachip->pdata->data, sadev->devid);
+
+	if (ret == 0) {
+		spin_lock_irqsave(&sachip->lock, flags);
+		val = readl_relaxed(sachip->base + SA1111_SKPCR);
+		writel_relaxed(val | sadev->skpcr_mask, sachip->base + SA1111_SKPCR);
+		spin_unlock_irqrestore(&sachip->lock, flags);
+	}
+	return ret;
+}
+EXPORT_SYMBOL(sa1111_enable_device);
+
+/**
+ *	sa1111_disable_device - disable an on-chip SA1111 function block
+ *	@sadev: SA1111 function block device to disable
+ */
+void sa1111_disable_device(struct sa1111_dev *sadev)
+{
+	struct sa1111 *sachip = sa1111_chip_driver(sadev);
+	unsigned long flags;
+	unsigned int val;
+
+	spin_lock_irqsave(&sachip->lock, flags);
+	val = readl_relaxed(sachip->base + SA1111_SKPCR);
+	writel_relaxed(val & ~sadev->skpcr_mask, sachip->base + SA1111_SKPCR);
+	spin_unlock_irqrestore(&sachip->lock, flags);
+
+	if (sachip->pdata && sachip->pdata->disable)
+		sachip->pdata->disable(sachip->pdata->data, sadev->devid);
+}
+EXPORT_SYMBOL(sa1111_disable_device);
+
+int sa1111_get_irq(struct sa1111_dev *sadev, unsigned num)
+{
+	struct sa1111 *sachip = sa1111_chip_driver(sadev);
+	if (num >= ARRAY_SIZE(sadev->hwirq))
+		return -EINVAL;
+	return sa1111_map_irq(sachip, sadev->hwirq[num]);
+}
+EXPORT_SYMBOL_GPL(sa1111_get_irq);
+
+/*
+ *	SA1111 "Register Access Bus."
+ *
+ *	We model this as a regular bus type, and hang devices directly
+ *	off this.
+ */
+static int sa1111_match(struct device *_dev, struct device_driver *_drv)
+{
+	struct sa1111_dev *dev = to_sa1111_device(_dev);
+	struct sa1111_driver *drv = SA1111_DRV(_drv);
+
+	return !!(dev->devid & drv->devid);
+}
+
+static int sa1111_bus_probe(struct device *dev)
+{
+	struct sa1111_dev *sadev = to_sa1111_device(dev);
+	struct sa1111_driver *drv = SA1111_DRV(dev->driver);
+	int ret = -ENODEV;
+
+	if (drv->probe)
+		ret = drv->probe(sadev);
+	return ret;
+}
+
+static void sa1111_bus_remove(struct device *dev)
+{
+	struct sa1111_dev *sadev = to_sa1111_device(dev);
+	struct sa1111_driver *drv = SA1111_DRV(dev->driver);
+
+	if (drv->remove)
+		drv->remove(sadev);
+}
+
+struct bus_type sa1111_bus_type = {
+	.name		= "sa1111-rab",
+	.match		= sa1111_match,
+	.probe		= sa1111_bus_probe,
+	.remove		= sa1111_bus_remove,
+};
+EXPORT_SYMBOL(sa1111_bus_type);
+
+int sa1111_driver_register(struct sa1111_driver *driver)
+{
+	driver->drv.bus = &sa1111_bus_type;
+	return driver_register(&driver->drv);
+}
+EXPORT_SYMBOL(sa1111_driver_register);
+
+void sa1111_driver_unregister(struct sa1111_driver *driver)
+{
+	driver_unregister(&driver->drv);
+}
+EXPORT_SYMBOL(sa1111_driver_unregister);
+
+static int __init sa1111_init(void)
+{
+	int ret = bus_register(&sa1111_bus_type);
+	if (ret == 0)
+		platform_driver_register(&sa1111_device_driver);
+	return ret;
+}
+
+static void __exit sa1111_exit(void)
+{
+	platform_driver_unregister(&sa1111_device_driver);
+	bus_unregister(&sa1111_bus_type);
+}
+
+subsys_initcall(sa1111_init);
+module_exit(sa1111_exit);
+
+MODULE_DESCRIPTION("Intel Corporation SA1111 core driver");
+MODULE_LICENSE("GPL");
diff --git a/arch/arm/common/scoop.c b/arch/arm/common/scoop.c
new file mode 100644
index 000000000..e74c5bfdc
--- /dev/null
+++ b/arch/arm/common/scoop.c
@@ -0,0 +1,268 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Support code for the SCOOP interface found on various Sharp PDAs
+ *
+ * Copyright (c) 2004 Richard Purdie
+ *
+ *	Based on code written by Sharp/Lineo for 2.4 kernels
+ */
+
+#include <linux/device.h>
+#include <linux/gpio/driver.h>
+#include <linux/string.h>
+#include <linux/slab.h>
+#include <linux/platform_device.h>
+#include <linux/export.h>
+#include <linux/io.h>
+#include <asm/hardware/scoop.h>
+
+/* PCMCIA to Scoop linkage
+
+   There is no easy way to link multiple scoop devices into one
+   single entity for the pxa2xx_pcmcia device so this structure
+   is used which is setup by the platform code.
+
+   This file is never modular so this symbol is always
+   accessile to the board support files.
+*/
+struct scoop_pcmcia_config *platform_scoop_config;
+EXPORT_SYMBOL(platform_scoop_config);
+
+struct  scoop_dev {
+	void __iomem *base;
+	struct gpio_chip gpio;
+	spinlock_t scoop_lock;
+	unsigned short suspend_clr;
+	unsigned short suspend_set;
+	u32 scoop_gpwr;
+};
+
+void reset_scoop(struct device *dev)
+{
+	struct scoop_dev *sdev = dev_get_drvdata(dev);
+
+	iowrite16(0x0100, sdev->base + SCOOP_MCR);  /* 00 */
+	iowrite16(0x0000, sdev->base + SCOOP_CDR);  /* 04 */
+	iowrite16(0x0000, sdev->base + SCOOP_CCR);  /* 10 */
+	iowrite16(0x0000, sdev->base + SCOOP_IMR);  /* 18 */
+	iowrite16(0x00FF, sdev->base + SCOOP_IRM);  /* 14 */
+	iowrite16(0x0000, sdev->base + SCOOP_ISR);  /* 1C */
+	iowrite16(0x0000, sdev->base + SCOOP_IRM);
+}
+
+static void __scoop_gpio_set(struct scoop_dev *sdev,
+			unsigned offset, int value)
+{
+	unsigned short gpwr;
+
+	gpwr = ioread16(sdev->base + SCOOP_GPWR);
+	if (value)
+		gpwr |= 1 << (offset + 1);
+	else
+		gpwr &= ~(1 << (offset + 1));
+	iowrite16(gpwr, sdev->base + SCOOP_GPWR);
+}
+
+static void scoop_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
+{
+	struct scoop_dev *sdev = gpiochip_get_data(chip);
+	unsigned long flags;
+
+	spin_lock_irqsave(&sdev->scoop_lock, flags);
+
+	__scoop_gpio_set(sdev, offset, value);
+
+	spin_unlock_irqrestore(&sdev->scoop_lock, flags);
+}
+
+static int scoop_gpio_get(struct gpio_chip *chip, unsigned offset)
+{
+	struct scoop_dev *sdev = gpiochip_get_data(chip);
+
+	/* XXX: I'm unsure, but it seems so */
+	return !!(ioread16(sdev->base + SCOOP_GPRR) & (1 << (offset + 1)));
+}
+
+static int scoop_gpio_direction_input(struct gpio_chip *chip,
+			unsigned offset)
+{
+	struct scoop_dev *sdev = gpiochip_get_data(chip);
+	unsigned long flags;
+	unsigned short gpcr;
+
+	spin_lock_irqsave(&sdev->scoop_lock, flags);
+
+	gpcr = ioread16(sdev->base + SCOOP_GPCR);
+	gpcr &= ~(1 << (offset + 1));
+	iowrite16(gpcr, sdev->base + SCOOP_GPCR);
+
+	spin_unlock_irqrestore(&sdev->scoop_lock, flags);
+
+	return 0;
+}
+
+static int scoop_gpio_direction_output(struct gpio_chip *chip,
+			unsigned offset, int value)
+{
+	struct scoop_dev *sdev = gpiochip_get_data(chip);
+	unsigned long flags;
+	unsigned short gpcr;
+
+	spin_lock_irqsave(&sdev->scoop_lock, flags);
+
+	__scoop_gpio_set(sdev, offset, value);
+
+	gpcr = ioread16(sdev->base + SCOOP_GPCR);
+	gpcr |= 1 << (offset + 1);
+	iowrite16(gpcr, sdev->base + SCOOP_GPCR);
+
+	spin_unlock_irqrestore(&sdev->scoop_lock, flags);
+
+	return 0;
+}
+
+unsigned short read_scoop_reg(struct device *dev, unsigned short reg)
+{
+	struct scoop_dev *sdev = dev_get_drvdata(dev);
+	return ioread16(sdev->base + reg);
+}
+
+void write_scoop_reg(struct device *dev, unsigned short reg, unsigned short data)
+{
+	struct scoop_dev *sdev = dev_get_drvdata(dev);
+	iowrite16(data, sdev->base + reg);
+}
+
+EXPORT_SYMBOL(reset_scoop);
+EXPORT_SYMBOL(read_scoop_reg);
+EXPORT_SYMBOL(write_scoop_reg);
+
+#ifdef CONFIG_PM
+static void check_scoop_reg(struct scoop_dev *sdev)
+{
+	unsigned short mcr;
+
+	mcr = ioread16(sdev->base + SCOOP_MCR);
+	if ((mcr & 0x100) == 0)
+		iowrite16(0x0101, sdev->base + SCOOP_MCR);
+}
+
+static int scoop_suspend(struct platform_device *dev, pm_message_t state)
+{
+	struct scoop_dev *sdev = platform_get_drvdata(dev);
+
+	check_scoop_reg(sdev);
+	sdev->scoop_gpwr = ioread16(sdev->base + SCOOP_GPWR);
+	iowrite16((sdev->scoop_gpwr & ~sdev->suspend_clr) | sdev->suspend_set, sdev->base + SCOOP_GPWR);
+
+	return 0;
+}
+
+static int scoop_resume(struct platform_device *dev)
+{
+	struct scoop_dev *sdev = platform_get_drvdata(dev);
+
+	check_scoop_reg(sdev);
+	iowrite16(sdev->scoop_gpwr, sdev->base + SCOOP_GPWR);
+
+	return 0;
+}
+#else
+#define scoop_suspend	NULL
+#define scoop_resume	NULL
+#endif
+
+static int scoop_probe(struct platform_device *pdev)
+{
+	struct scoop_dev *devptr;
+	struct scoop_config *inf;
+	struct resource *mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	int ret;
+
+	if (!mem)
+		return -EINVAL;
+
+	devptr = kzalloc(sizeof(struct scoop_dev), GFP_KERNEL);
+	if (!devptr)
+		return -ENOMEM;
+
+	spin_lock_init(&devptr->scoop_lock);
+
+	inf = pdev->dev.platform_data;
+	devptr->base = ioremap(mem->start, resource_size(mem));
+
+	if (!devptr->base) {
+		ret = -ENOMEM;
+		goto err_ioremap;
+	}
+
+	platform_set_drvdata(pdev, devptr);
+
+	printk("Sharp Scoop Device found at 0x%08x -> 0x%8p\n",(unsigned int)mem->start, devptr->base);
+
+	iowrite16(0x0140, devptr->base + SCOOP_MCR);
+	reset_scoop(&pdev->dev);
+	iowrite16(0x0000, devptr->base + SCOOP_CPR);
+	iowrite16(inf->io_dir & 0xffff, devptr->base + SCOOP_GPCR);
+	iowrite16(inf->io_out & 0xffff, devptr->base + SCOOP_GPWR);
+
+	devptr->suspend_clr = inf->suspend_clr;
+	devptr->suspend_set = inf->suspend_set;
+
+	devptr->gpio.base = -1;
+
+	if (inf->gpio_base != 0) {
+		devptr->gpio.label = dev_name(&pdev->dev);
+		devptr->gpio.base = inf->gpio_base;
+		devptr->gpio.ngpio = 12; /* PA11 = 0, PA12 = 1, etc. up to PA22 = 11 */
+		devptr->gpio.set = scoop_gpio_set;
+		devptr->gpio.get = scoop_gpio_get;
+		devptr->gpio.direction_input = scoop_gpio_direction_input;
+		devptr->gpio.direction_output = scoop_gpio_direction_output;
+
+		ret = gpiochip_add_data(&devptr->gpio, devptr);
+		if (ret)
+			goto err_gpio;
+	}
+
+	return 0;
+
+err_gpio:
+	platform_set_drvdata(pdev, NULL);
+err_ioremap:
+	iounmap(devptr->base);
+	kfree(devptr);
+
+	return ret;
+}
+
+static int scoop_remove(struct platform_device *pdev)
+{
+	struct scoop_dev *sdev = platform_get_drvdata(pdev);
+
+	if (sdev->gpio.base != -1)
+		gpiochip_remove(&sdev->gpio);
+
+	platform_set_drvdata(pdev, NULL);
+	iounmap(sdev->base);
+	kfree(sdev);
+
+	return 0;
+}
+
+static struct platform_driver scoop_driver = {
+	.probe		= scoop_probe,
+	.remove		= scoop_remove,
+	.suspend	= scoop_suspend,
+	.resume		= scoop_resume,
+	.driver		= {
+		.name	= "sharp-scoop",
+	},
+};
+
+static int __init scoop_init(void)
+{
+	return platform_driver_register(&scoop_driver);
+}
+
+subsys_initcall(scoop_init);
diff --git a/arch/arm/common/secure_cntvoff.S b/arch/arm/common/secure_cntvoff.S
new file mode 100644
index 000000000..53fc7bdb6
--- /dev/null
+++ b/arch/arm/common/secure_cntvoff.S
@@ -0,0 +1,32 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2014 Renesas Electronics Corporation
+ *
+ * Initialization of CNTVOFF register from secure mode
+ *
+ */
+
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+
+ENTRY(secure_cntvoff_init)
+	.arch	armv7-a
+	/*
+	 * CNTVOFF has to be initialized either from non-secure Hypervisor
+	 * mode or secure Monitor mode with SCR.NS==1. If TrustZone is enabled
+	 * then it should be handled by the secure code. The CPU must implement
+	 * the virtualization extensions.
+	 */
+	cps	#MON_MODE
+	mrc	p15, 0, r1, c1, c1, 0		/* Get Secure Config */
+	orr	r0, r1, #1
+	mcr	p15, 0, r0, c1, c1, 0		/* Set Non Secure bit */
+	isb
+	mov	r0, #0
+	mcrr	p15, 4, r0, r0, c14		/* CNTVOFF = 0 */
+	isb
+	mcr	p15, 0, r1, c1, c1, 0		/* Set Secure bit */
+	isb
+	cps	#SVC_MODE
+	ret	lr
+ENDPROC(secure_cntvoff_init)
diff --git a/arch/arm/common/sharpsl_param.c b/arch/arm/common/sharpsl_param.c
new file mode 100644
index 000000000..6237ede2f
--- /dev/null
+++ b/arch/arm/common/sharpsl_param.c
@@ -0,0 +1,63 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Hardware parameter area specific to Sharp SL series devices
+ *
+ * Copyright (c) 2005 Richard Purdie
+ *
+ * Based on Sharp's 2.4 kernel patches
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/string.h>
+#include <asm/mach/sharpsl_param.h>
+#include <asm/memory.h>
+
+/*
+ * Certain hardware parameters determined at the time of device manufacture,
+ * typically including LCD parameters are loaded by the bootloader at the
+ * address PARAM_BASE. As the kernel will overwrite them, we need to store
+ * them early in the boot process, then pass them to the appropriate drivers.
+ * Not all devices use all parameters but the format is common to all.
+ */
+#ifdef CONFIG_ARCH_SA1100
+#define PARAM_BASE	0xe8ffc000
+#define param_start(x)	(void *)(x)
+#else
+#define PARAM_BASE	0xa0000a00
+#define param_start(x)	__va(x)
+#endif
+#define MAGIC_CHG(a,b,c,d) ( ( d << 24 ) | ( c << 16 )  | ( b << 8 ) | a )
+
+#define COMADJ_MAGIC	MAGIC_CHG('C','M','A','D')
+#define UUID_MAGIC	MAGIC_CHG('U','U','I','D')
+#define TOUCH_MAGIC	MAGIC_CHG('T','U','C','H')
+#define AD_MAGIC	MAGIC_CHG('B','V','A','D')
+#define PHAD_MAGIC	MAGIC_CHG('P','H','A','D')
+
+struct sharpsl_param_info sharpsl_param;
+EXPORT_SYMBOL(sharpsl_param);
+
+void sharpsl_save_param(void)
+{
+	struct sharpsl_param_info *params = param_start(PARAM_BASE);
+
+	memcpy(&sharpsl_param, params, sizeof(*params));
+
+	if (sharpsl_param.comadj_keyword != COMADJ_MAGIC)
+		sharpsl_param.comadj=-1;
+
+	if (sharpsl_param.phad_keyword != PHAD_MAGIC)
+		sharpsl_param.phadadj=-1;
+
+	if (sharpsl_param.uuid_keyword != UUID_MAGIC)
+		sharpsl_param.uuid[0]=-1;
+
+	if (sharpsl_param.touch_keyword != TOUCH_MAGIC)
+		sharpsl_param.touch_xp=-1;
+
+	if (sharpsl_param.adadj_keyword != AD_MAGIC)
+		sharpsl_param.adadj=-1;
+}
+
+
diff --git a/arch/arm/common/vlock.S b/arch/arm/common/vlock.S
new file mode 100644
index 000000000..f1c7fd44f
--- /dev/null
+++ b/arch/arm/common/vlock.S
@@ -0,0 +1,99 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * vlock.S - simple voting lock implementation for ARM
+ *
+ * Created by:	Dave Martin, 2012-08-16
+ * Copyright:	(C) 2012-2013  Linaro Limited
+ *
+ * This algorithm is described in more detail in
+ * Documentation/arm/vlocks.rst.
+ */
+
+#include <linux/linkage.h>
+#include "vlock.h"
+
+/* Select different code if voting flags  can fit in a single word. */
+#if VLOCK_VOTING_SIZE > 4
+#define FEW(x...)
+#define MANY(x...) x
+#else
+#define FEW(x...) x
+#define MANY(x...)
+#endif
+
+@ voting lock for first-man coordination
+
+.macro voting_begin rbase:req, rcpu:req, rscratch:req
+	mov	\rscratch, #1
+	strb	\rscratch, [\rbase, \rcpu]
+	dmb
+.endm
+
+.macro voting_end rbase:req, rcpu:req, rscratch:req
+	dmb
+	mov	\rscratch, #0
+	strb	\rscratch, [\rbase, \rcpu]
+	dsb	st
+	sev
+.endm
+
+/*
+ * The vlock structure must reside in Strongly-Ordered or Device memory.
+ * This implementation deliberately eliminates most of the barriers which
+ * would be required for other memory types, and assumes that independent
+ * writes to neighbouring locations within a cacheline do not interfere
+ * with one another.
+ */
+
+@ r0: lock structure base
+@ r1: CPU ID (0-based index within cluster)
+ENTRY(vlock_trylock)
+	add	r1, r1, #VLOCK_VOTING_OFFSET
+
+	voting_begin	r0, r1, r2
+
+	ldrb	r2, [r0, #VLOCK_OWNER_OFFSET]	@ check whether lock is held
+	cmp	r2, #VLOCK_OWNER_NONE
+	bne	trylock_fail			@ fail if so
+
+	@ Control dependency implies strb not observable before previous ldrb.
+
+	strb	r1, [r0, #VLOCK_OWNER_OFFSET]	@ submit my vote
+
+	voting_end	r0, r1, r2		@ implies DMB
+
+	@ Wait for the current round of voting to finish:
+
+ MANY(	mov	r3, #VLOCK_VOTING_OFFSET			)
+0:
+ MANY(	ldr	r2, [r0, r3]					)
+ FEW(	ldr	r2, [r0, #VLOCK_VOTING_OFFSET]			)
+	cmp	r2, #0
+	wfene
+	bne	0b
+ MANY(	add	r3, r3, #4					)
+ MANY(	cmp	r3, #VLOCK_VOTING_OFFSET + VLOCK_VOTING_SIZE	)
+ MANY(	bne	0b						)
+
+	@ Check who won:
+
+	dmb
+	ldrb	r2, [r0, #VLOCK_OWNER_OFFSET]
+	eor	r0, r1, r2			@ zero if I won, else nonzero
+	bx	lr
+
+trylock_fail:
+	voting_end	r0, r1, r2
+	mov	r0, #1				@ nonzero indicates that I lost
+	bx	lr
+ENDPROC(vlock_trylock)
+
+@ r0: lock structure base
+ENTRY(vlock_unlock)
+	dmb
+	mov	r1, #VLOCK_OWNER_NONE
+	strb	r1, [r0, #VLOCK_OWNER_OFFSET]
+	dsb	st
+	sev
+	bx	lr
+ENDPROC(vlock_unlock)
diff --git a/arch/arm/common/vlock.h b/arch/arm/common/vlock.h
new file mode 100644
index 000000000..422429781
--- /dev/null
+++ b/arch/arm/common/vlock.h
@@ -0,0 +1,21 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * vlock.h - simple voting lock implementation
+ *
+ * Created by:	Dave Martin, 2012-08-16
+ * Copyright:	(C) 2012-2013  Linaro Limited
+ */
+
+#ifndef __VLOCK_H
+#define __VLOCK_H
+
+#include <asm/mcpm.h>
+
+/* Offsets and sizes are rounded to a word (4 bytes) */
+#define VLOCK_OWNER_OFFSET	0
+#define VLOCK_VOTING_OFFSET	4
+#define VLOCK_VOTING_SIZE	((MAX_CPUS_PER_CLUSTER + 3) / 4 * 4)
+#define VLOCK_SIZE		(VLOCK_VOTING_OFFSET + VLOCK_VOTING_SIZE)
+#define VLOCK_OWNER_NONE	0
+
+#endif /* ! __VLOCK_H */