diff options
Diffstat (limited to 'arch/arm/mach-nomadik')
| -rw-r--r-- | arch/arm/mach-nomadik/Kconfig | 32 | ||||
| -rw-r--r-- | arch/arm/mach-nomadik/Makefile | 12 | ||||
| -rw-r--r-- | arch/arm/mach-nomadik/cpu-8815.c | 109 |
3 files changed, 153 insertions, 0 deletions
diff --git a/arch/arm/mach-nomadik/Kconfig b/arch/arm/mach-nomadik/Kconfig new file mode 100644 index 000000000..f5c4df6d2 --- /dev/null +++ b/arch/arm/mach-nomadik/Kconfig @@ -0,0 +1,32 @@ +# SPDX-License-Identifier: GPL-2.0-only +menuconfig ARCH_NOMADIK + bool "ST-Ericsson Nomadik" + depends on ARCH_MULTI_V5 + depends on CPU_LITTLE_ENDIAN + select ARM_AMBA + select ARM_VIC + select CLKSRC_NOMADIK_MTU + select CPU_ARM926T + select GPIOLIB + select MFD_SYSCON + select MIGHT_HAVE_CACHE_L2X0 + select PINCTRL + select PINCTRL_NOMADIK + select PINCTRL_STN8815 + help + Support for the Nomadik platform by ST-Ericsson + +if ARCH_NOMADIK + +config MACH_NOMADIK_8815NHK + bool "ST 8815 Nomadik Hardware Kit (evaluation board)" + select NOMADIK_8815 + select I2C + select I2C_ALGOBIT + select I2C_NOMADIK + +endif + +config NOMADIK_8815 + depends on ARCH_NOMADIK + bool diff --git a/arch/arm/mach-nomadik/Makefile b/arch/arm/mach-nomadik/Makefile new file mode 100644 index 000000000..27ae20111 --- /dev/null +++ b/arch/arm/mach-nomadik/Makefile @@ -0,0 +1,12 @@ +# SPDX-License-Identifier: GPL-2.0-only +# +# Makefile for the linux kernel. +# +# Note! Dependencies are done automagically by 'make dep', which also +# removes any old dependencies. DON'T put your own dependencies here +# unless it's something special (ie not a .c file). + +# Object file lists. + +# Cpu revision +obj-$(CONFIG_NOMADIK_8815) += cpu-8815.o diff --git a/arch/arm/mach-nomadik/cpu-8815.c b/arch/arm/mach-nomadik/cpu-8815.c new file mode 100644 index 000000000..51f88a297 --- /dev/null +++ b/arch/arm/mach-nomadik/cpu-8815.c @@ -0,0 +1,109 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright STMicroelectronics, 2007. + */ + +#include <linux/types.h> +#include <linux/init.h> +#include <linux/device.h> +#include <linux/amba/bus.h> +#include <linux/platform_device.h> +#include <linux/io.h> +#include <linux/slab.h> +#include <linux/irq.h> +#include <linux/dma-mapping.h> +#include <linux/of_irq.h> +#include <linux/of_address.h> +#include <linux/of_platform.h> + +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/mach/time.h> +#include <asm/mach-types.h> + +#include <asm/cacheflush.h> +#include <asm/hardware/cache-l2x0.h> + +/* + * These are the only hard-coded address offsets we still have to use. + */ +#define NOMADIK_FSMC_BASE 0x10100000 /* FSMC registers */ +#define NOMADIK_SDRAMC_BASE 0x10110000 /* SDRAM Controller */ +#define NOMADIK_CLCDC_BASE 0x10120000 /* CLCD Controller */ +#define NOMADIK_MDIF_BASE 0x10120000 /* MDIF */ +#define NOMADIK_DMA0_BASE 0x10130000 /* DMA0 Controller */ +#define NOMADIK_IC_BASE 0x10140000 /* Vectored Irq Controller */ +#define NOMADIK_DMA1_BASE 0x10150000 /* DMA1 Controller */ +#define NOMADIK_USB_BASE 0x10170000 /* USB-OTG conf reg base */ +#define NOMADIK_CRYP_BASE 0x10180000 /* Crypto processor */ +#define NOMADIK_SHA1_BASE 0x10190000 /* SHA-1 Processor */ +#define NOMADIK_XTI_BASE 0x101A0000 /* XTI */ +#define NOMADIK_RNG_BASE 0x101B0000 /* Random number generator */ +#define NOMADIK_SRC_BASE 0x101E0000 /* SRC base */ +#define NOMADIK_WDOG_BASE 0x101E1000 /* Watchdog */ +#define NOMADIK_MTU0_BASE 0x101E2000 /* Multiple Timer 0 */ +#define NOMADIK_MTU1_BASE 0x101E3000 /* Multiple Timer 1 */ +#define NOMADIK_GPIO0_BASE 0x101E4000 /* GPIO0 */ +#define NOMADIK_GPIO1_BASE 0x101E5000 /* GPIO1 */ +#define NOMADIK_GPIO2_BASE 0x101E6000 /* GPIO2 */ +#define NOMADIK_GPIO3_BASE 0x101E7000 /* GPIO3 */ +#define NOMADIK_RTC_BASE 0x101E8000 /* Real Time Clock base */ +#define NOMADIK_PMU_BASE 0x101E9000 /* Power Management Unit */ +#define NOMADIK_OWM_BASE 0x101EA000 /* One wire master */ +#define NOMADIK_SCR_BASE 0x101EF000 /* Secure Control registers */ +#define NOMADIK_MSP2_BASE 0x101F0000 /* MSP 2 interface */ +#define NOMADIK_MSP1_BASE 0x101F1000 /* MSP 1 interface */ +#define NOMADIK_UART2_BASE 0x101F2000 /* UART 2 interface */ +#define NOMADIK_SSIRx_BASE 0x101F3000 /* SSI 8-ch rx interface */ +#define NOMADIK_SSITx_BASE 0x101F4000 /* SSI 8-ch tx interface */ +#define NOMADIK_MSHC_BASE 0x101F5000 /* Memory Stick(Pro) Host */ +#define NOMADIK_SDI_BASE 0x101F6000 /* SD-card/MM-Card */ +#define NOMADIK_I2C1_BASE 0x101F7000 /* I2C1 interface */ +#define NOMADIK_I2C0_BASE 0x101F8000 /* I2C0 interface */ +#define NOMADIK_MSP0_BASE 0x101F9000 /* MSP 0 interface */ +#define NOMADIK_FIRDA_BASE 0x101FA000 /* FIrDA interface */ +#define NOMADIK_UART1_BASE 0x101FB000 /* UART 1 interface */ +#define NOMADIK_SSP_BASE 0x101FC000 /* SSP interface */ +#define NOMADIK_UART0_BASE 0x101FD000 /* UART 0 interface */ +#define NOMADIK_SGA_BASE 0x101FE000 /* SGA interface */ +#define NOMADIK_L2CC_BASE 0x10210000 /* L2 Cache controller */ +#define NOMADIK_UART1_VBASE 0xF01FB000 + +/* This is needed for LL-debug/earlyprintk/debug-macro.S */ +static struct map_desc cpu8815_io_desc[] __initdata = { + { + .virtual = NOMADIK_UART1_VBASE, + .pfn = __phys_to_pfn(NOMADIK_UART1_BASE), + .length = SZ_4K, + .type = MT_DEVICE, + }, +}; + +static void __init cpu8815_map_io(void) +{ + iotable_init(cpu8815_io_desc, ARRAY_SIZE(cpu8815_io_desc)); +} + +static void cpu8815_restart(enum reboot_mode mode, const char *cmd) +{ + void __iomem *srcbase = ioremap(NOMADIK_SRC_BASE, SZ_4K); + + /* FIXME: use egpio when implemented */ + + /* Write anything to Reset status register */ + writel(1, srcbase + 0x18); +} + +static const char * cpu8815_board_compat[] = { + "st,nomadik-nhk-15", + "calaosystems,usb-s8815", + NULL, +}; + +DT_MACHINE_START(NOMADIK_DT, "Nomadik STn8815") + .l2c_aux_val = 0, + .l2c_aux_mask = ~0, + .map_io = cpu8815_map_io, + .restart = cpu8815_restart, + .dt_compat = cpu8815_board_compat, +MACHINE_END |