diff options
Diffstat (limited to 'arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts')
| -rw-r--r-- | arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts | 697 |
1 files changed, 697 insertions, 0 deletions
diff --git a/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts b/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts new file mode 100644 index 000000000..0192a01bf --- /dev/null +++ b/arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts @@ -0,0 +1,697 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * dts file for Hisilicon HiKey960 Development Board + * + * Copyright (C) 2016, HiSilicon Ltd. + * + */ + +/dts-v1/; + +#include "hi3660.dtsi" +#include "hikey960-pinctrl.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/usb/pd.h> + +/ { + model = "HiKey960"; + compatible = "hisilicon,hi3660-hikey960", "hisilicon,hi3660"; + + aliases { + mshc1 = &dwmmc1; + mshc2 = &dwmmc2; + serial0 = &uart0; + serial1 = &uart1; + serial2 = &uart2; + serial3 = &uart3; + serial4 = &uart4; + serial5 = &uart5; + serial6 = &uart6; + }; + + chosen { + stdout-path = "serial6:115200n8"; + }; + + memory@0 { + device_type = "memory"; + /* rewrite this at bootloader */ + reg = <0x0 0x0 0x0 0x0>; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + ramoops@32000000 { + compatible = "ramoops"; + reg = <0x0 0x32000000 0x0 0x00100000>; + record-size = <0x00020000>; + console-size = <0x00020000>; + ftrace-size = <0x00020000>; + }; + }; + + reboot-mode-syscon@32100000 { + compatible = "syscon", "simple-mfd"; + reg = <0x0 0x32100000 0x0 0x00001000>; + + reboot-mode { + compatible = "syscon-reboot-mode"; + offset = <0x0>; + + mode-normal = <0x77665501>; + mode-bootloader = <0x77665500>; + mode-recovery = <0x77665502>; + }; + }; + + keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pwr_key_pmx_func &pwr_key_cfg_func>; + + key-power { + wakeup-source; + gpios = <&gpio4 2 GPIO_ACTIVE_LOW>; + label = "GPIO Power"; + linux,code = <KEY_POWER>; + }; + }; + + leds { + compatible = "gpio-leds"; + + user_led1 { + label = "green:user1"; + /* gpio_150_user_led1 */ + gpios = <&gpio18 6 0>; + linux,default-trigger = "heartbeat"; + }; + + user_led2 { + label = "green:user2"; + /* gpio_151_user_led2 */ + gpios = <&gpio18 7 0>; + linux,default-trigger = "none"; + }; + + user_led3 { + label = "green:user3"; + /* gpio_189_user_led3 */ + gpios = <&gpio23 5 0>; + linux,default-trigger = "mmc0"; + }; + + user_led4 { + label = "green:user4"; + /* gpio_190_user_led4 */ + gpios = <&gpio23 6 0>; + panic-indicator; + linux,default-trigger = "none"; + }; + + wlan_active_led { + label = "yellow:wlan"; + /* gpio_205_wifi_active */ + gpios = <&gpio25 5 0>; + linux,default-trigger = "phy0tx"; + default-state = "off"; + }; + + bt_active_led { + label = "blue:bt"; + gpios = <&gpio25 7 0>; + /* gpio_207_user_led1 */ + linux,default-trigger = "hci0-power"; + default-state = "off"; + }; + }; + + pmic: pmic@fff34000 { + compatible = "hisilicon,hi6421v530-pmic"; + reg = <0x0 0xfff34000 0x0 0x1000>; + interrupt-controller; + #interrupt-cells = <2>; + + regulators { + ldo3: LDO3 { /* HDMI */ + regulator-name = "VOUT3_1V85"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2200000>; + regulator-enable-ramp-delay = <120>; + }; + + ldo9: LDO9 { /* SDCARD I/O */ + regulator-name = "VOUT9_1V8_2V95"; + regulator-min-microvolt = <1750000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <240>; + }; + + ldo11: LDO11 { /* Low Speed Connector */ + regulator-name = "VOUT11_1V8_2V95"; + regulator-min-microvolt = <1750000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <240>; + }; + + ldo15: LDO15 { /* UFS VCC */ + regulator-name = "VOUT15_3V0"; + regulator-min-microvolt = <1750000>; + regulator-max-microvolt = <3000000>; + regulator-boot-on; + regulator-always-on; + regulator-enable-ramp-delay = <120>; + }; + + ldo16: LDO16 { /* SD VDD */ + regulator-name = "VOUT16_2V95"; + regulator-min-microvolt = <1750000>; + regulator-max-microvolt = <3000000>; + regulator-enable-ramp-delay = <360>; + }; + }; + }; + + wlan_en: wlan-en-1-8v { + compatible = "regulator-fixed"; + regulator-name = "wlan-en-regulator"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + /* GPIO_051_WIFI_EN */ + gpio = <&gpio6 3 0>; + + /* WLAN card specific delay */ + startup-delay-us = <70000>; + enable-active-high; + }; + + firmware { + optee { + compatible = "linaro,optee-tz"; + method = "smc"; + }; + }; +}; + +/* + * Legend: proper name = the GPIO line is used as GPIO + * NC = not connected (pin out but not routed from the chip to + * anything the board) + * "[PER]" = pin is muxed for [peripheral] (not GPIO) + * "" = no idea, schematic doesn't say, could be + * unrouted (not connected to any external pin) + * LSEC = Low Speed External Connector + * HSEC = High Speed External Connector + * + * Line names are taken from "HiKey 960 Board ver A" schematics + * from Huawei. The 40 pin low speed expansion connector is named + * J2002 63453-140LF. + * + * For the lines routed to the external connectors the + * lines are named after the 96Boards CE Specification 1.0, + * Appendix "Expansion Connector Signal Description". + * + * When the 96Board naming of a line and the schematic name of + * the same line are in conflict, the 96Board specification + * takes precedence, which means that the external UART on the + * LSEC is named UART0 while the schematic and SoC names this + * UART3. This is only for the informational lines i.e. "[FOO]", + * the GPIO named lines "GPIO-A" thru "GPIO-L" are the only + * ones actually used for GPIO. + */ +&gpio0 { + /* GPIO_000-GPIO_007 */ + gpio-line-names = + "", + "TP901", /* TEST_MODE connected to TP901 */ + "[PMU0_SSI]", + "[PMU1_SSI]", + "[PMU2_SSI]", + "[PMU0_CLKOUT]", + "[JTAG_TCK]", + "[JTAG_TMS]"; +}; + +&gpio1 { + /* GPIO_008-GPIO_015 */ + gpio-line-names = + "[JTAG_TRST_N]", + "[JTAG_TDI]", + "[JTAG_TDO]", + "NC", "NC", + "[I2C3_SCL]", + "[I2C3_SDA]", + "NC"; +}; + +&gpio2 { + /* GPIO_016-GPIO_023 */ + gpio-line-names = + "NC", "NC", "NC", + "GPIO-J", /* LSEC pin 32: GPIO_019 */ + "GPIO_020_HDMI_SEL", + "GPIO-L", /* LSEC pin 34: GPIO_021 */ + "GPIO_022_UFSBUCK_INT_N", + "GPIO-G"; /* LSEC pin 29: LCD_TE0 */ +}; + +&gpio3 { + /* GPIO_024-GPIO_031 */ + /* The rail from pin BK36 is named LCD_TE0, we assume to be muxed as GPIO for GPIO-G */ + gpio-line-names = + "[CSI0_MCLK]", /* HSEC pin 15: ISP_CCLK0_MCAM */ + "[CSI1_MCLK]", /* HSEC pin 17: ISP_CCLK1_SCAM */ + "NC", + "[I2C2_SCL]", /* HSEC pin 32: ISP_SCL0 */ + "[I2C2_SDA]", /* HSEC pin 34: ISP_SDA0 */ + "[I2C3_SCL]", /* HSEC pin 36: ISP_SCL1 */ + "[I2C3_SDA]", /* HSEC pin 38: ISP_SDA1 */ + "NC"; +}; + +&gpio4 { + /* GPIO_032-GPIO_039 */ + gpio-line-names = + "NC", "NC", + "PWR_BTN_N", /* LSEC pin 4: GPIO_034_PWRON_DET */ + "GPIO_035_PMU2_EN", + "GPIO_036_USB_HUB_RESET", + "NC", "NC", "NC"; +}; + +&gpio5 { + /* GPIO_040-GPIO_047 */ + gpio-line-names = + "GPIO-H", /* LSEC pin 30: GPIO_040_LCD_RST_N */ + "GPIO_041_HDMI_PD", + "TP904", /* Test point */ + "TP905", /* Test point */ + "NC", "NC", + "GPIO_046_HUB_VDD33_EN", + "GPIO_047_PMU1_EN"; +}; + +&gpio6 { + /* GPIO_048-GPIO_055 */ + gpio-line-names = + "NC", "NC", "NC", + "GPIO_051_WIFI_EN", + "GPIO-I", /* LSEC pin 31: GPIO_052_CAM0_RST_N */ + /* + * These two pins should be used for SD(IO) data according to the + * 96boards specification but seems to be repurposed for a IRDA UART. + * They are however named according to the spec. + */ + "[SD_DAT1]", /* HSEC pin 3: UART0_IRDA_RXD */ + "[SD_DAT2]", /* HSEC pin 5: UART0_IRDA_TXD */ + "[UART1_RXD]"; /* LSEC pin 13: DEBUG_UART6_RXD */ +}; + +&gpio7 { + /* GPIO_056-GPIO_063 */ + gpio-line-names = + "[UART1_TXD]", /* LSEC pin 11: DEBUG_UART6_TXD */ + "[UART0_CTS]", /* LSEC pin 3: UART3_CTS_N */ + "[UART0_RTS]", /* LSEC pin 9: UART3_RTS_N */ + "[UART0_RXD]", /* LSEC pin 7: UART3_RXD */ + "[UART0_TXD]", /* LSEC pin 5: UART3_TXD */ + "[SOC_BT_UART4_CTS_N]", + "[SOC_BT_UART4_RTS_N]", + "[SOC_BT_UART4_RXD]"; +}; + +&gpio8 { + /* GPIO_064-GPIO_071 */ + gpio-line-names = + "[SOC_BT_UART4_TXD]", + "NC", + "[PMU_HKADC_SSI]", + "NC", + "GPIO_068_SEL", + "NC", "NC", "NC"; + +}; + +&gpio9 { + /* GPIO_072-GPIO_079 */ + gpio-line-names = + "NC", "NC", "NC", + "GPIO-K", /* LSEC pin 33: GPIO_075_CAM1_RST_N */ + "NC", "NC", "NC", "NC"; +}; + +&gpio10 { + /* GPIO_080-GPIO_087 */ + gpio-line-names = "NC", "NC", "NC", "NC", "NC", "NC", "NC", "NC"; +}; + +&gpio11 { + /* GPIO_088-GPIO_095 */ + gpio-line-names = + "NC", + "[PCIE_PERST_N]", + "NC", "NC", "NC", "NC", "NC", "NC"; +}; + +&gpio12 { + /* GPIO_096-GPIO_103 */ + gpio-line-names = "NC", "NC", "NC", "", "", "", "", "NC"; +}; + +&gpio13 { + /* GPIO_104-GPIO_111 */ + gpio-line-names = "NC", "NC", "NC", "NC", "NC", "NC", "NC", "NC"; +}; + +&gpio14 { + /* GPIO_112-GPIO_119 */ + gpio-line-names = "NC", "NC", "NC", "NC", "NC", "NC", "NC", "NC"; +}; + +&gpio15 { + /* GPIO_120-GPIO_127 */ + gpio-line-names = + "NC", "NC", "NC", "NC", "NC", "NC", + "GPIO_126_BT_EN", + "TP902"; /* GPIO_127_JTAG_SEL0 */ +}; + +&gpio16 { + /* GPIO_128-GPIO_135 */ + gpio-line-names = "", "", "", "", "", "", "", ""; +}; + +&gpio17 { + /* GPIO_136-GPIO_143 */ + gpio-line-names = "", "", "", "", "", "", "", ""; +}; + +&gpio18 { + /* GPIO_144-GPIO_151 */ + gpio-line-names = + "[UFS_REF_CLK]", + "[UFS_RST_N]", + "[SPI1_SCLK]", /* HSEC pin 9: GPIO_146_SPI3_CLK */ + "[SPI1_DIN]", /* HSEC pin 11: GPIO_147_SPI3_DI */ + "[SPI1_DOUT]", /* HSEC pin 1: GPIO_148_SPI3_DO */ + "[SPI1_CS]", /* HSEC pin 7: GPIO_149_SPI3_CS0_N */ + "GPIO_150_USER_LED1", + "GPIO_151_USER_LED2"; +}; + +&gpio19 { + /* GPIO_152-GPIO_159 */ + gpio-line-names = "NC", "NC", "NC", "NC", "", "", "", ""; +}; + +&gpio20 { + /* GPIO_160-GPIO_167 */ + gpio-line-names = + "[SD_CLK]", + "[SD_CMD]", + "[SD_DATA0]", + "[SD_DATA1]", + "[SD_DATA2]", + "[SD_DATA3]", + "", ""; +}; + +&gpio21 { + /* GPIO_168-GPIO_175 */ + gpio-line-names = + "[WL_SDIO_CLK]", + "[WL_SDIO_CMD]", + "[WL_SDIO_DATA0]", + "[WL_SDIO_DATA1]", + "[WL_SDIO_DATA2]", + "[WL_SDIO_DATA3]", + "", ""; +}; + +&gpio22 { + /* GPIO_176-GPIO_183 */ + gpio-line-names = + "[GPIO_176_PMU_PWR_HOLD]", + "NA", + "[SYSCLK_EN]", + "GPIO_179_WL_WAKEUP_AP", + "GPIO_180_HDMI_INT", + "NA", + "GPIO-F", /* LSEC pin 28: LCD_BL_PWM */ + "[I2C0_SCL]"; /* LSEC pin 15 */ +}; + +&gpio23 { + /* GPIO_184-GPIO_191 */ + gpio-line-names = + "[I2C0_SDA]", /* LSEC pin 17 */ + "[I2C1_SCL]", /* Actual SoC I2C1 */ + "[I2C1_SDA]", /* Actual SoC I2C1 */ + "[I2C1_SCL]", /* LSEC pin 19: I2C7_SCL */ + "[I2C1_SDA]", /* LSEC pin 21: I2C7_SDA */ + "GPIO_189_USER_LED3", + "GPIO_190_USER_LED4", + ""; +}; + +&gpio24 { + /* GPIO_192-GPIO_199 */ + gpio-line-names = + "[PCM_DI]", /* LSEC pin 22: GPIO_192_I2S0_DI */ + "[PCM_DO]", /* LSEC pin 20: GPIO_193_I2S0_DO */ + "[PCM_CLK]", /* LSEC pin 18: GPIO_194_I2S0_XCLK */ + "[PCM_FS]", /* LSEC pin 16: GPIO_195_I2S0_XFS */ + "[GPIO_196_I2S2_DI]", + "[GPIO_197_I2S2_DO]", + "[GPIO_198_I2S2_XCLK]", + "[GPIO_199_I2S2_XFS]"; +}; + +&gpio25 { + /* GPIO_200-GPIO_207 */ + gpio-line-names = + "NC", + "NC", + "GPIO_202_VBUS_TYPEC", + "GPIO_203_SD_DET", + "GPIO_204_PMU12_IRQ_N", + "GPIO_205_WIFI_ACTIVE", + "GPIO_206_USBSW_SEL", + "GPIO_207_BT_ACTIVE"; +}; + +&gpio26 { + /* GPIO_208-GPIO_215 */ + gpio-line-names = + "GPIO-A", /* LSEC pin 23: GPIO_208 */ + "GPIO-B", /* LSEC pin 24: GPIO_209 */ + "GPIO-C", /* LSEC pin 25: GPIO_210 */ + "GPIO-D", /* LSEC pin 26: GPIO_211 */ + "GPIO-E", /* LSEC pin 27: GPIO_212 */ + "[PCIE_CLKREQ_N]", + "[PCIE_WAKE_N]", + "[SPI0_CLK]"; /* LSEC pin 8: SPI2_CLK */ +}; + +&gpio27 { + /* GPIO_216-GPIO_223 */ + gpio-line-names = + "[SPI0_DIN]", /* LSEC pin 10: SPI2_DI */ + "[SPI0_DOUT]", /* LSEC pin 14: SPI2_DO */ + "[SPI0_CS]", /* LSEC pin 12: SPI2_CS0_N */ + "GPIO_219_CC_INT", + "NC", + "NC", + "[PMU_INT]", + ""; +}; + +&gpio28 { + /* GPIO_224-GPIO_231 */ + gpio-line-names = + "", "", "", "", "", "", "", ""; +}; + +&i2c0 { + /* On Low speed expansion */ + label = "LS-I2C0"; + status = "okay"; +}; + +&i2c1 { + status = "okay"; + + rt1711h: rt1711h@4e { + compatible = "richtek,rt1711h"; + reg = <0x4e>; + status = "okay"; + interrupt-parent = <&gpio27>; + interrupts = <3 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&usb_cfg_func>; + + usb_con: connector { + compatible = "usb-c-connector"; + label = "USB-C"; + data-role = "dual"; + power-role = "dual"; + try-power-role = "sink"; + source-pdos = <PDO_FIXED(5000, 500, PDO_FIXED_USB_COMM)>; + sink-pdos = <PDO_FIXED(5000, 500, PDO_FIXED_USB_COMM) + PDO_VAR(5000, 5000, 1000)>; + op-sink-microwatt = <10000000>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + port@1 { + reg = <1>; + usb_con_ss: endpoint { + remote-endpoint = <&dwc3_ss>; + }; + }; + }; + }; + port { + #address-cells = <1>; + #size-cells = <0>; + + rt1711h_ep: endpoint@0 { + reg = <0>; + remote-endpoint = <&dwc3_role_switch>; + }; + }; + }; + + adv7533: adv7533@39 { + status = "okay"; + compatible = "adi,adv7533"; + reg = <0x39>; + adi,dsi-lanes = <4>; + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + }; + port@1 { + reg = <1>; + }; + }; + }; +}; + +&i2c7 { + /* On Low speed expansion */ + label = "LS-I2C1"; + status = "okay"; +}; + +&uart3 { + /* On Low speed expansion */ + label = "LS-UART0"; + status = "okay"; +}; + +&uart4 { + status = "okay"; + + bluetooth { + compatible = "ti,wl1837-st"; + enable-gpios = <&gpio15 6 GPIO_ACTIVE_HIGH>; + max-speed = <3000000>; + }; +}; + +&uart6 { + /* On Low speed expansion */ + label = "LS-UART1"; + status = "okay"; +}; + +&spi2 { + /* On Low speed expansion */ + label = "LS-SPI0"; + status = "okay"; +}; + +&spi3 { + /* On High speed expansion */ + label = "HS-SPI1"; + status = "okay"; +}; + +&dwmmc1 { + bus-width = <0x4>; + cap-sd-highspeed; + sd-uhs-sdr12; + sd-uhs-sdr25; + sd-uhs-sdr50; + sd-uhs-sdr104; + disable-wp; + cd-gpios = <&gpio25 3 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&sd_pmx_func + &sd_clk_cfg_func + &sd_cfg_func>; + vmmc-supply = <&ldo16>; + vqmmc-supply = <&ldo9>; + status = "okay"; +}; + +&dwmmc2 { /* WIFI */ + bus-width = <0x4>; + non-removable; + broken-cd; + cap-power-off-card; + pinctrl-names = "default"; + pinctrl-0 = <&sdio_pmx_func + &sdio_clk_cfg_func + &sdio_cfg_func>; + /* WL_EN */ + vmmc-supply = <&wlan_en>; + status = "okay"; + + wlcore: wlcore@2 { + compatible = "ti,wl1837"; + reg = <2>; /* sdio func num */ + /* WL_IRQ, GPIO_179_WL_WAKEUP_AP */ + interrupt-parent = <&gpio22>; + interrupts = <3 IRQ_TYPE_EDGE_RISING>; + }; +}; + +&dwc3 { /* USB */ + dr_mode = "otg"; + maximum-speed = "super-speed"; + phy_type = "utmi"; + snps,dis-del-phy-power-chg-quirk; + snps,lfps_filter_quirk; + snps,dis_u2_susphy_quirk; + snps,dis_u3_susphy_quirk; + snps,tx_de_emphasis_quirk; + snps,tx_de_emphasis = <1>; + snps,dis_enblslpm_quirk; + snps,gctl-reset-quirk; + usb-role-switch; + role-switch-default-mode = "host"; + port { + #address-cells = <1>; + #size-cells = <0>; + dwc3_role_switch: endpoint@0 { + reg = <0>; + remote-endpoint = <&rt1711h_ep>; + }; + + dwc3_ss: endpoint@1 { + reg = <1>; + remote-endpoint = <&usb_con_ss>; + }; + }; +}; |