diff options
Diffstat (limited to '')
| -rw-r--r-- | arch/arm64/boot/dts/marvell/armada-7040-db.dts | 308 |
1 files changed, 308 insertions, 0 deletions
diff --git a/arch/arm64/boot/dts/marvell/armada-7040-db.dts b/arch/arm64/boot/dts/marvell/armada-7040-db.dts new file mode 100644 index 000000000..5e5baf6be --- /dev/null +++ b/arch/arm64/boot/dts/marvell/armada-7040-db.dts @@ -0,0 +1,308 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2016 Marvell Technology Group Ltd. + * + * Device Tree file for Marvell Armada 7040 Development board platform + */ + +#include <dt-bindings/gpio/gpio.h> +#include "armada-7040.dtsi" + +/ { + model = "Marvell Armada 7040 DB board"; + compatible = "marvell,armada7040-db", "marvell,armada7040", + "marvell,armada-ap806-quad", "marvell,armada-ap806"; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x80000000>; + }; + + aliases { + ethernet0 = &cp0_eth0; + ethernet1 = &cp0_eth1; + ethernet2 = &cp0_eth2; + }; + + cp0_exp_usb3_0_current_regulator: gpio-regulator { + compatible = "regulator-gpio"; + regulator-name = "cp0-usb3-0-current-regulator"; + regulator-type = "current"; + regulator-min-microamp = <500000>; + regulator-max-microamp = <900000>; + gpios = <&expander0 4 GPIO_ACTIVE_HIGH>; + states = <500000 0x0 + 900000 0x1>; + enable-active-high; + gpios-states = <0>; + }; + + cp0_exp_usb3_1_current_regulator: gpio-regulator { + compatible = "regulator-gpio"; + regulator-name = "cp0-usb3-1-current-regulator"; + regulator-type = "current"; + regulator-min-microamp = <500000>; + regulator-max-microamp = <900000>; + gpios = <&expander0 5 GPIO_ACTIVE_HIGH>; + states = <500000 0x0 + 900000 0x1>; + enable-active-high; + gpios-states = <0>; + }; + + cp0_reg_usb3_0_vbus: cp0-usb3-0-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb3h0-vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&expander0 0 GPIO_ACTIVE_HIGH>; + vin-supply = <&cp0_exp_usb3_0_current_regulator>; + }; + + cp0_reg_usb3_1_vbus: cp0-usb3-1-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb3h1-vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&expander0 1 GPIO_ACTIVE_HIGH>; + vin-supply = <&cp0_exp_usb3_1_current_regulator>; + }; +}; + +&i2c0 { + status = "okay"; + clock-frequency = <100000>; +}; + +&spi0 { + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <10000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "U-Boot"; + reg = <0 0x200000>; + }; + partition@400000 { + label = "Filesystem"; + reg = <0x200000 0xce0000>; + }; + }; + }; +}; + +&uart0 { + status = "okay"; + pinctrl-0 = <&uart0_pins>; + pinctrl-names = "default"; +}; + + +&cp0_pcie2 { + status = "okay"; + phys = <&cp0_comphy5 2>; + phy-names = "cp0-pcie2-x1-phy"; +}; + +&cp0_i2c0 { + status = "okay"; + clock-frequency = <100000>; + + expander0: pca9555@21 { + compatible = "nxp,pca9555"; + pinctrl-names = "default"; + gpio-controller; + #gpio-cells = <2>; + reg = <0x21>; + /* + * IO0_0: USB3_PWR_EN0 IO1_0: USB_3_1_Dev_Detect + * IO0_1: USB3_PWR_EN1 IO1_1: USB2_1_current_limit + * IO0_2: DDR3_4_Detect IO1_2: Hcon_IO_RstN + * IO0_3: USB2_DEVICE_DETECT + * IO0_4: GPIO_0 IO1_4: SD_Status + * IO0_5: GPIO_1 IO1_5: LDO_5V_Enable + * IO0_6: IHB_5V_Enable IO1_6: PWR_EN_eMMC + * IO0_7: IO1_7: SDIO_Vcntrl + */ + }; +}; + +&cp0_nand_controller { + /* + * SPI on CPM and NAND have common pins on this board. We can + * use only one at a time. To enable the NAND (which will + * disable the SPI), the "status = "okay";" line have to be + * added here. + */ + pinctrl-0 = <&nand_pins>, <&nand_rb>; + pinctrl-names = "default"; + + nand@0 { + reg = <0>; + label = "pxa3xx_nand-0"; + nand-rb = <0>; + nand-on-flash-bbt; + nand-ecc-strength = <4>; + nand-ecc-step-size = <512>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "U-Boot"; + reg = <0 0x200000>; + }; + + partition@200000 { + label = "Linux"; + reg = <0x200000 0xe00000>; + }; + + partition@1000000 { + label = "Filesystem"; + reg = <0x1000000 0x3f000000>; + }; + + }; + }; +}; + +&cp0_spi1 { + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0x0>; + spi-max-frequency = <20000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "U-Boot"; + reg = <0x0 0x200000>; + }; + + partition@400000 { + label = "Filesystem"; + reg = <0x200000 0xe00000>; + }; + }; + }; +}; + +&cp0_sata0 { + status = "okay"; + + sata-port@1 { + phys = <&cp0_comphy3 1>; + phy-names = "cp0-sata0-1-phy"; + }; +}; + +&cp0_utmi { + status = "okay"; +}; + +&cp0_comphy1 { + cp0_usbh0_con: connector { + compatible = "usb-a-connector"; + phy-supply = <&cp0_reg_usb3_0_vbus>; + }; +}; + +&cp0_usb3_0 { + phys = <&cp0_comphy1 0>, <&cp0_utmi0>; + phy-names = "cp0-usb3h0-comphy", "utmi"; + dr_mode = "host"; + status = "okay"; +}; + +&cp0_comphy4 { + cp0_usbh1_con: connector { + compatible = "usb-a-connector"; + phy-supply = <&cp0_reg_usb3_1_vbus>; + }; +}; + +&cp0_usb3_1 { + phys = <&cp0_comphy4 1>, <&cp0_utmi1>; + phy-names = "cp0-usb3h1-comphy", "utmi"; + dr_mode = "host"; + status = "okay"; +}; + +&ap_sdhci0 { + status = "okay"; + bus-width = <4>; + no-1-8-v; + non-removable; +}; + +&cp0_sdhci0 { + status = "okay"; + bus-width = <4>; + no-1-8-v; + cd-gpios = <&expander0 12 GPIO_ACTIVE_LOW>; +}; + +&cp0_mdio { + status = "okay"; + + phy0: ethernet-phy@0 { + reg = <0>; + }; + phy1: ethernet-phy@1 { + reg = <1>; + }; +}; + +&cp0_ethernet { + status = "okay"; +}; + +&cp0_eth0 { + status = "okay"; + /* Network PHY */ + phy-mode = "10gbase-r"; + /* Generic PHY, providing serdes lanes */ + phys = <&cp0_comphy2 0>; + + fixed-link { + speed = <10000>; + full-duplex; + }; +}; + +&cp0_eth1 { + status = "okay"; + /* Network PHY */ + phy = <&phy0>; + phy-mode = "sgmii"; + /* Generic PHY, providing serdes lanes */ + phys = <&cp0_comphy0 1>; +}; + +&cp0_eth2 { + status = "okay"; + phy = <&phy1>; + phy-mode = "rgmii-id"; +}; |