diff options
Diffstat (limited to '')
| -rw-r--r-- | arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu.dts | 14 | ||||
| -rw-r--r-- | arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu.dtsi | 382 |
2 files changed, 396 insertions, 0 deletions
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu.dts b/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu.dts new file mode 100644 index 000000000..89a139a0e --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu.dts @@ -0,0 +1,14 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright 2020 Google LLC + */ + +/dts-v1/; +#include "mt8183-kukui-kakadu.dtsi" +#include "mt8183-kukui-audio-da7219-rt1015p.dtsi" + +/ { + model = "MediaTek kakadu board"; + compatible = "google,kakadu-rev3", "google,kakadu-rev2", + "google,kakadu", "mediatek,mt8183"; +}; diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu.dtsi new file mode 100644 index 000000000..50a0dd36b --- /dev/null +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu.dtsi @@ -0,0 +1,382 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright 2020 Google LLC + */ + +#include "mt8183-kukui.dtsi" +#include <dt-bindings/input/gpio-keys.h> + +/ { + ppvarn_lcd: ppvarn-lcd { + compatible = "regulator-fixed"; + regulator-name = "ppvarn_lcd"; + pinctrl-names = "default"; + pinctrl-0 = <&ppvarn_lcd_en>; + + enable-active-high; + + gpio = <&pio 66 GPIO_ACTIVE_HIGH>; + }; + + ppvarp_lcd: ppvarp-lcd { + compatible = "regulator-fixed"; + regulator-name = "ppvarp_lcd"; + pinctrl-names = "default"; + pinctrl-0 = <&ppvarp_lcd_en>; + + enable-active-high; + + gpio = <&pio 166 GPIO_ACTIVE_HIGH>; + }; + + pp1800_lcd: pp1800-lcd { + compatible = "regulator-fixed"; + regulator-name = "pp1800_lcd"; + pinctrl-names = "default"; + pinctrl-0 = <&pp1800_lcd_en>; + + enable-active-high; + + gpio = <&pio 36 GPIO_ACTIVE_HIGH>; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pen_eject>; + + switch-pen-insert { + label = "Pen Insert"; + /* Insert = low, eject = high */ + gpios = <&pio 6 GPIO_ACTIVE_LOW>; + linux,code = <SW_PEN_INSERTED>; + linux,input-type = <EV_SW>; + wakeup-event-action = <EV_ACT_DEASSERTED>; + wakeup-source; + }; + }; +}; + +&bluetooth { + firmware-name = "nvm_00440302_i2s_eu.bin"; +}; + +&i2c0 { + status = "okay"; + + touchscreen: touchscreen@10 { + compatible = "hid-over-i2c"; + reg = <0x10>; + pinctrl-names = "default"; + pinctrl-0 = <&open_touch>; + + interrupt-parent = <&pio>; + interrupts = <155 IRQ_TYPE_EDGE_FALLING>; + + post-power-on-delay-ms = <10>; + hid-descr-addr = <0x0001>; + }; +}; + +&mt6358_vcama2_reg { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins>; + status = "okay"; + clock-frequency = <400000>; + vbus-supply = <&mt6358_vcamio_reg>; + + eeprom@58 { + compatible = "atmel,24c32"; + reg = <0x58>; + pagesize = <32>; + vcc-supply = <&mt6358_vcama2_reg>; + }; +}; + +&i2c4 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c4_pins>; + status = "okay"; + clock-frequency = <400000>; + vbus-supply = <&mt6358_vcn18_reg>; + + eeprom@54 { + compatible = "atmel,24c32"; + reg = <0x54>; + pagesize = <32>; + vcc-supply = <&mt6358_vcn18_reg>; + }; +}; + +&mipi_tx0 { + drive-strength-microamp = <5800>; +}; + +&pio { + /* 192 lines */ + gpio-line-names = + "SPI_AP_EC_CS_L", + "SPI_AP_EC_MOSI", + "SPI_AP_EC_CLK", + "I2S3_DO", + "USB_PD_INT_ODL", + "", + "", + "", + "", + "IT6505_HPD_L", + "I2S3_TDM_D3", + "SOC_I2C6_1V8_SCL", + "SOC_I2C6_1V8_SDA", + "DPI_D0", + "DPI_D1", + "DPI_D2", + "DPI_D3", + "DPI_D4", + "DPI_D5", + "DPI_D6", + "DPI_D7", + "DPI_D8", + "DPI_D9", + "DPI_D10", + "DPI_D11", + "DPI_HSYNC", + "DPI_VSYNC", + "DPI_DE", + "DPI_CK", + "AP_MSDC1_CLK", + "AP_MSDC1_DAT3", + "AP_MSDC1_CMD", + "AP_MSDC1_DAT0", + "AP_MSDC1_DAT2", + "AP_MSDC1_DAT1", + "", + "", + "", + "", + "", + "", + "OTG_EN", + "DRVBUS", + "DISP_PWM", + "DSI_TE", + "LCM_RST_1V8", + "AP_CTS_WIFI_RTS", + "AP_RTS_WIFI_CTS", + "SOC_I2C5_1V8_SCL", + "SOC_I2C5_1V8_SDA", + "SOC_I2C3_1V8_SCL", + "SOC_I2C3_1V8_SDA", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "SOC_I2C1_1V8_SDA", + "SOC_I2C0_1V8_SDA", + "SOC_I2C0_1V8_SCL", + "SOC_I2C1_1V8_SCL", + "AP_SPI_H1_MISO", + "AP_SPI_H1_CS_L", + "AP_SPI_H1_MOSI", + "AP_SPI_H1_CLK", + "I2S5_BCK", + "I2S5_LRCK", + "I2S5_DO", + "BOOTBLOCK_EN_L", + "MT8183_KPCOL0", + "SPI_AP_EC_MISO", + "UART_DBG_TX_AP_RX", + "UART_AP_TX_DBG_RX", + "I2S2_MCK", + "I2S2_BCK", + "CLK_5M_WCAM", + "CLK_2M_UCAM", + "I2S2_LRCK", + "I2S2_DI", + "SOC_I2C2_1V8_SCL", + "SOC_I2C2_1V8_SDA", + "SOC_I2C4_1V8_SCL", + "SOC_I2C4_1V8_SDA", + "", + "SCL8", + "SDA8", + "FCAM_PWDN_L", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "I2S_PMIC", + "I2S_PMIC", + "I2S_PMIC", + "I2S_PMIC", + "I2S_PMIC", + "I2S_PMIC", + "I2S_PMIC", + "I2S_PMIC", + "", + "", + "", + "", + "", + "", + /* + * AP_FLASH_WP_L is crossystem ABI. Rev1 schematics + * call it BIOS_FLASH_WP_R_L. + */ + "AP_FLASH_WP_L", + "EC_AP_INT_ODL", + "IT6505_INT_ODL", + "H1_INT_OD_L", + "", + "", + "", + "", + "", + "", + "", + "AP_SPI_FLASH_MISO", + "AP_SPI_FLASH_CS_L", + "AP_SPI_FLASH_MOSI", + "AP_SPI_FLASH_CLK", + "DA7219_IRQ", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + ""; + + ppvarp_lcd_en: ppvarp-lcd-en { + pins1 { + pinmux = <PINMUX_GPIO66__FUNC_GPIO66>; + output-low; + }; + }; + + ppvarn_lcd_en: ppvarn-lcd-en { + pins1 { + pinmux = <PINMUX_GPIO166__FUNC_GPIO166>; + output-low; + }; + }; + + pp1800_lcd_en: pp1800-lcd-en { + pins1 { + pinmux = <PINMUX_GPIO36__FUNC_GPIO36>; + output-low; + }; + }; + + open_touch: open_touch { + irq_pin { + pinmux = <PINMUX_GPIO155__FUNC_GPIO155>; + input-enable; + bias-pull-up; + }; + + rst_pin { + pinmux = <PINMUX_GPIO156__FUNC_GPIO156>; + + /* + * The pen driver doesn't currently support driving + * this reset line. By specifying output-high here + * we're relying on the fact that this pin has a default + * pulldown at boot (which makes sure the pen was in + * reset if it was powered) and then we set it high here + * to take it out of reset. Better would be if the pen + * driver could control this and we could remove + * "output-high" here. + */ + output-high; + }; + }; + + pen_eject: peneject { + pen_eject { + pinmux = <PINMUX_GPIO6__FUNC_GPIO6>; + input-enable; + /* External pull-up. */ + bias-disable; + }; + }; +}; + +&qca_wifi { + qcom,ath10k-calibration-variant = "GO_KAKADU"; +}; + +&panel { + status = "okay"; + compatible = "boe,tv105wum-nw0"; +}; |