diff options
Diffstat (limited to 'arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts')
| -rw-r--r-- | arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts | 725 |
1 files changed, 725 insertions, 0 deletions
diff --git a/arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts b/arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts new file mode 100644 index 000000000..429ba57e2 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts @@ -0,0 +1,725 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2021, AngeloGioacchino Del Regno + * <angelogioacchino.delregno@somainline.org> + */ + +/dts-v1/; + +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> +#include "msm8998.dtsi" +#include "pm8005.dtsi" +#include "pm8998.dtsi" +#include "pmi8998.dtsi" + +/ { + model = "F(x)tec Pro1 (QX1000)"; + compatible = "fxtec,pro1", "qcom,msm8998"; + chassis-type = "handset"; + qcom,board-id = <0x02000b 0x10>; + + aliases { + serial0 = &blsp2_uart1; + serial1 = &blsp1_uart3; + }; + + /* + * Until we hook up type-c detection, we + * have to stick with this. But it works. + */ + extcon_usb: extcon-usb { + compatible = "linux,extcon-usb-gpio"; + id-gpio = <&tlmm 38 GPIO_ACTIVE_HIGH>; + }; + + gpio-hall-sensors { + compatible = "gpio-keys"; + label = "Hall sensors"; + pinctrl-names = "default"; + pinctrl-0 = <&hall_sensor1_default>; + + event-hall-sensor1 { + label = "Keyboard Hall Sensor"; + gpios = <&tlmm 124 GPIO_ACTIVE_HIGH>; + debounce-interval = <15>; + gpio-key,wakeup; + linux,input-type = <EV_SW>; + linux,code = <SW_KEYPAD_SLIDE>; + }; + }; + + gpio-kb-extra-keys { + compatible = "gpio-keys"; + label = "Keyboard extra keys"; + pinctrl-names = "default"; + pinctrl-0 = <&gpio_kb_pins_extra>; + + key-home { + label = "Home"; + gpios = <&tlmm 21 GPIO_ACTIVE_LOW>; + linux,code = <KEY_HOMEPAGE>; + debounce-interval = <15>; + linux,can-disable; + }; + + key-super-l { + label = "Super Left"; + gpios = <&tlmm 32 GPIO_ACTIVE_LOW>; + linux,code = <KEY_FN>; + debounce-interval = <15>; + linux,can-disable; + }; + + key-super-r { + label = "Super Right"; + gpios = <&tlmm 33 GPIO_ACTIVE_LOW>; + linux,code = <KEY_FN>; + debounce-interval = <15>; + linux,can-disable; + }; + + key-shift { + label = "Shift"; + gpios = <&tlmm 114 GPIO_ACTIVE_LOW>; + linux,code = <KEY_RIGHTSHIFT>; + debounce-interval = <15>; + linux,can-disable; + }; + + key-ctrl { + label = "Ctrl"; + gpios = <&tlmm 128 GPIO_ACTIVE_LOW>; + linux,code = <KEY_LEFTCTRL>; + debounce-interval = <15>; + linux,can-disable; + }; + + key-alt { + label = "Alt"; + gpios = <&tlmm 129 GPIO_ACTIVE_LOW>; + linux,code = <KEY_LEFTALT>; + debounce-interval = <15>; + linux,can-disable; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + label = "Side buttons"; + pinctrl-names = "default"; + pinctrl-0 = <&vol_up_pin_a>, <&cam_focus_pin_a>, + <&cam_snapshot_pin_a>; + button-vol-up { + label = "Volume Up"; + gpios = <&pm8998_gpio 6 GPIO_ACTIVE_LOW>; + linux,input-type = <EV_KEY>; + linux,code = <KEY_VOLUMEUP>; + gpio-key,wakeup; + debounce-interval = <15>; + }; + + button-camera-snapshot { + label = "Camera Snapshot"; + gpios = <&pm8998_gpio 7 GPIO_ACTIVE_LOW>; + linux,input-type = <EV_KEY>; + linux,code = <KEY_CAMERA>; + debounce-interval = <15>; + }; + + button-camera-focus { + label = "Camera Focus"; + gpios = <&pm8998_gpio 8 GPIO_ACTIVE_LOW>; + linux,input-type = <EV_KEY>; + linux,code = <KEY_CAMERA_FOCUS>; + debounce-interval = <15>; + }; + }; + + keyboard-leds { + compatible = "gpio-leds"; + + led-0 { + color = <LED_COLOR_ID_WHITE>; + default-state = "off"; + function = LED_FUNCTION_KBD_BACKLIGHT; + gpios = <&tlmm 16 GPIO_ACTIVE_HIGH>; + label = "white:kbd_backlight"; + retain-state-suspended; + }; + + led-1 { + color = <LED_COLOR_ID_YELLOW>; + default-state = "off"; + function = LED_FUNCTION_CAPSLOCK; + gpios = <&tlmm 26 GPIO_ACTIVE_HIGH>; + label = "yellow:capslock"; + linux,default-trigger = "kbd-capslock"; + }; + }; + + reserved-memory { + cont_splash_mem: memory@9d400000 { + reg = <0x0 0x9d400000 0x0 0x2000000>; + no-map; + }; + + zap_shader_region: memory@f6400000 { + compatible = "shared-dma-pool"; + reg = <0x0 0xf6400000 0x0 0x2000>; + no-map; + }; + + ramoops@ffc00000 { + compatible = "ramoops"; + reg = <0x0 0xffc00000 0x0 0x100000>; + console-size = <0x60000>; + ecc-size = <16>; + ftrace-size = <0x10000>; + pmsg-size = <0x20000>; + record-size = <0x10000>; + }; + }; + + ts_vio_vreg: ts-vio-vreg { + compatible = "regulator-fixed"; + regulator-name = "ts_vio_reg"; + startup-delay-us = <2>; + enable-active-high; + gpio = <&tlmm 81 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&ts_vio_default>; + regulator-always-on; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-always-on; + regulator-boot-on; + }; +}; + +&blsp1_uart3 { + status = "okay"; + + bluetooth { + compatible = "qcom,wcn3990-bt"; + + vddio-supply = <&vreg_s4a_1p8>; + vddxo-supply = <&vreg_l7a_1p8>; + vddrf-supply = <&vreg_l17a_1p3>; + vddch0-supply = <&vreg_l25a_3p3>; + max-speed = <3200000>; + }; +}; + +&blsp1_uart3_on { + rx { + /delete-property/ bias-disable; + /* + * Configure a pull-up on 45 (RX). This is needed to + * avoid garbage data when the TX pin of the Bluetooth + * module is in tri-state (module powered off or not + * driving the signal yet). + */ + bias-pull-up; + }; + + cts { + /delete-property/ bias-disable; + /* + * Configure a pull-down on 47 (CTS) to match the pull + * of the Bluetooth module. + */ + bias-pull-down; + }; +}; + +&blsp2_uart1 { + status = "okay"; +}; + +&blsp2_i2c1 { + status = "okay"; + + touchscreen@14 { + compatible = "goodix,gt9286"; + reg = <0x14>; + interrupt-parent = <&tlmm>; + interrupts = <125 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&tlmm 89 GPIO_ACTIVE_HIGH>; + AVDD28-supply = <&vreg_l28_3p0>; + VDDIO-supply = <&ts_vio_vreg>; + pinctrl-names = "active"; + pinctrl-0 = <&ts_rst_n>, <&ts_int_n>; + }; +}; + +&etf { + status = "okay"; +}; + +&etm1 { + status = "okay"; +}; + +&etm2 { + status = "okay"; +}; + +&etm3 { + status = "okay"; +}; + +&etm4 { + status = "okay"; +}; + +&etm5 { + status = "okay"; +}; + +&etm6 { + status = "okay"; +}; + +&etm7 { + status = "okay"; +}; + +&etm8 { + status = "okay"; +}; + +&etr { + status = "okay"; +}; + +&funnel1 { + status = "okay"; +}; + +&funnel2 { + status = "okay"; +}; + +&funnel3 { + status = "okay"; +}; + +&funnel4 { + // FIXME: Figure out why clock late_initcall crashes the board with + // this enabled. + // status = "okay"; +}; + +&funnel5 { + // FIXME: Figure out why clock late_initcall crashes the board with + // this enabled. + // status = "okay"; +}; + +&pcie0 { + status = "okay"; +}; + +&pcie_phy { + status = "okay"; +}; + +&pm8005_regulators { + vdd_s1-supply = <&vph_pwr>; + + pm8005_s1: s1 { /* VDD_GFX supply */ + regulator-min-microvolt = <524000>; + regulator-max-microvolt = <1100000>; + regulator-enable-ramp-delay = <500>; + + /* Hack until we rig up the gpu consumer */ + regulator-always-on; + }; +}; + +&pm8998_gpio { + vol_up_pin_a: vol-up-active-state { + pins = "gpio6"; + function = "normal"; + bias-pull-up; + input-enable; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; + }; + + cam_focus_pin_a: cam-focus-btn-active-state { + pins = "gpio7"; + function = "normal"; + bias-pull-up; + input-enable; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; + }; + + cam_snapshot_pin_a: cam-snapshot-btn-active-state { + pins = "gpio8"; + function = "normal"; + bias-pull-up; + input-enable; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>; + }; +}; + +&pm8998_pon { + resin { + compatible = "qcom,pm8941-resin"; + interrupts = <GIC_SPI 0x8 1 IRQ_TYPE_EDGE_BOTH>; + bias-pull-up; + debounce = <15625>; + linux,code = <KEY_VOLUMEDOWN>; + }; +}; + +&qusb2phy { + status = "okay"; + + vdda-pll-supply = <&vreg_l12a_1p8>; + vdda-phy-dpdm-supply = <&vreg_l24a_3p075>; +}; + +&replicator1 { + status = "okay"; +}; + +&rpm_requests { + pm8998-regulators { + compatible = "qcom,rpm-pm8998-regulators"; + + vdd_s1-supply = <&vph_pwr>; + vdd_s2-supply = <&vph_pwr>; + vdd_s3-supply = <&vph_pwr>; + vdd_s4-supply = <&vph_pwr>; + vdd_s5-supply = <&vph_pwr>; + vdd_s6-supply = <&vph_pwr>; + vdd_s7-supply = <&vph_pwr>; + vdd_s8-supply = <&vph_pwr>; + vdd_s9-supply = <&vph_pwr>; + vdd_s10-supply = <&vph_pwr>; + vdd_s11-supply = <&vph_pwr>; + vdd_s12-supply = <&vph_pwr>; + vdd_s13-supply = <&vph_pwr>; + vdd_l1_l27-supply = <&vreg_s7a_1p025>; + vdd_l2_l8_l17-supply = <&vreg_s3a_1p35>; + vdd_l3_l11-supply = <&vreg_s7a_1p025>; + vdd_l4_l5-supply = <&vreg_s7a_1p025>; + vdd_l6-supply = <&vreg_s5a_2p04>; + vdd_l7_l12_l14_l15-supply = <&vreg_s5a_2p04>; + vdd_l9-supply = <&vreg_bob>; + vdd_l10_l23_l25-supply = <&vreg_bob>; + vdd_l13_l19_l21-supply = <&vreg_bob>; + vdd_l16_l28-supply = <&vreg_bob>; + vdd_l18_l22-supply = <&vreg_bob>; + vdd_l20_l24-supply = <&vreg_bob>; + vdd_l26-supply = <&vreg_s3a_1p35>; + vdd_lvs1_lvs2-supply = <&vreg_s4a_1p8>; + + vreg_s3a_1p35: s3 { + regulator-min-microvolt = <1352000>; + regulator-max-microvolt = <1352000>; + }; + + vreg_s4a_1p8: s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-allow-set-load; + }; + + vreg_s5a_2p04: s5 { + regulator-min-microvolt = <1904000>; + regulator-max-microvolt = <2040000>; + }; + + vreg_s7a_1p025: s7 { + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1028000>; + }; + + vreg_l1a_0p875: l1 { + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + }; + + vreg_l2a_1p2: l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + vreg_l3a_1p0: l3 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + + vreg_l5a_0p8: l5 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + }; + + vreg_l6a_1p8: l6 { + regulator-min-microvolt = <1808000>; + regulator-max-microvolt = <1808000>; + }; + + vreg_l7a_1p8: l7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vreg_l8a_1p2: l8 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + vreg_l9a_1p8: l9 { + regulator-min-microvolt = <1808000>; + regulator-max-microvolt = <2960000>; + }; + + vreg_l10a_1p8: l10 { + regulator-min-microvolt = <1808000>; + regulator-max-microvolt = <2960000>; + }; + + vreg_l11a_1p0: l11 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + + vreg_l12a_1p8: l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vreg_l13a_2p95: l13 { + regulator-min-microvolt = <1808000>; + regulator-max-microvolt = <2960000>; + }; + + vreg_l14a_1p88: l14 { + regulator-min-microvolt = <1880000>; + regulator-max-microvolt = <1880000>; + }; + + vreg_l15a_1p8: l15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vreg_l16a_2p7: l16 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2704000>; + }; + + vreg_l17a_1p3: l17 { + regulator-min-microvolt = <1304000>; + regulator-max-microvolt = <1304000>; + }; + + vreg_l18a_2p7: l18 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2704000>; + }; + + vreg_l19a_3p0: l19 { + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3008000>; + }; + + vreg_l20a_2p95: l20 { + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <2960000>; + regulator-allow-set-load; + }; + + vreg_l21a_2p95: l21 { + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <2960000>; + regulator-system-load = <800000>; + regulator-allow-set-load; + }; + + vreg_l22a_2p85: l22 { + regulator-min-microvolt = <2864000>; + regulator-max-microvolt = <2864000>; + }; + + vreg_l23a_3p3: l23 { + regulator-min-microvolt = <3312000>; + regulator-max-microvolt = <3312000>; + }; + + vreg_l24a_3p075: l24 { + regulator-min-microvolt = <3088000>; + regulator-max-microvolt = <3088000>; + }; + + vreg_l25a_3p3: l25 { + regulator-min-microvolt = <3104000>; + regulator-max-microvolt = <3312000>; + }; + + vreg_l26a_1p2: l26 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-allow-set-load; + }; + + vreg_l28_3p0: l28 { + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3008000>; + }; + + vreg_lvs1a_1p8: lvs1 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vreg_lvs2a_1p8: lvs2 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + }; + + pmi8998-regulators { + compatible = "qcom,rpm-pmi8998-regulators"; + + vdd_bob-supply = <&vph_pwr>; + + vreg_bob: bob { + regulator-min-microvolt = <3312000>; + regulator-max-microvolt = <3600000>; + }; + }; +}; + +&remoteproc_adsp { + status = "okay"; +}; + +&remoteproc_mss { + status = "okay"; +}; + +&remoteproc_slpi { + status = "okay"; +}; + +&tlmm { + gpio-reserved-ranges = <0 4>; + + mdp_vsync_n: mdp-vsync-n { + pins = "gpio10"; + function = "mdp_vsync_a"; + bias-pull-down; + drive-strength = <2>; + }; + + gpio_kb_pins_extra: gpio-kb-pins-extra { + pins = "gpio21", "gpio32", "gpio33", "gpio114", + "gpio128", "gpio129"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + + ts_vio_default: ts-vio-def { + pins = "gpio81"; + function = "gpio"; + bias-disable; + drive-strength = <2>; + }; + + ts_rst_n: ts-rst-n { + pins = "gpio89"; + function = "gpio"; + bias-pull-up; + drive-strength = <8>; + }; + + hall_sensor1_default: hall-sensor1-def { + pins = "gpio124"; + function = "gpio"; + bias-disable; + drive-strength = <2>; + input-enable; + }; + + ts_int_n: ts-int-n { + pins = "gpio125"; + function = "gpio"; + bias-disable; + drive-strength = <8>; + }; +}; + +&sdhc2 { + status = "okay"; + cd-gpios = <&tlmm 95 GPIO_ACTIVE_LOW>; + + vmmc-supply = <&vreg_l21a_2p95>; + vqmmc-supply = <&vreg_l13a_2p95>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_on &sdc2_cd>; + pinctrl-1 = <&sdc2_off &sdc2_cd>; +}; + +&stm { + status = "okay"; +}; + +&ufshc { + status = "okay"; + vcc-supply = <&vreg_l20a_2p95>; + vccq-supply = <&vreg_l26a_1p2>; + vccq2-supply = <&vreg_s4a_1p8>; + vcc-max-microamp = <750000>; + vccq-max-microamp = <560000>; + vccq2-max-microamp = <750000>; +}; + +&ufsphy { + status = "okay"; + vdda-phy-supply = <&vreg_l1a_0p875>; + vdda-pll-supply = <&vreg_l2a_1p2>; + vddp-ref-clk-supply = <&vreg_l26a_1p2>; +}; + +&usb3 { + status = "okay"; +}; + +&usb3_dwc3 { + dr_mode = "peripheral"; + extcon = <&extcon_usb>; +}; + +&usb3phy { + status = "okay"; + + vdda-phy-supply = <&vreg_l1a_0p875>; + vdda-pll-supply = <&vreg_l2a_1p2>; +}; + +/* GT9286 analog supply */ +&vreg_l28_3p0 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; +}; + +&wifi { + status = "okay"; + + vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>; + vdd-1.8-xo-supply = <&vreg_l7a_1p8>; + vdd-1.3-rfa-supply = <&vreg_l17a_1p3>; + vdd-3.3-ch0-supply = <&vreg_l25a_3p3>; +}; |