diff options
Diffstat (limited to '')
| -rw-r--r-- | arch/arm64/boot/dts/qcom/sc7280-idp.dtsi | 853 |
1 files changed, 853 insertions, 0 deletions
diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi new file mode 100644 index 000000000..1c370dcfe --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi @@ -0,0 +1,853 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * sc7280 IDP board device tree source (common between SKU1 and SKU2) + * + * Copyright (c) 2021, The Linux Foundation. All rights reserved. + */ + +#include <dt-bindings/iio/qcom,spmi-adc7-pmk8350.h> +#include <dt-bindings/input/linux-event-codes.h> +#include "sc7280.dtsi" +#include "pm7325.dtsi" +#include "pm8350c.dtsi" +#include "pmk8350.dtsi" + +#include "sc7280-chrome-common.dtsi" +#include "sc7280-herobrine-lte-sku.dtsi" + +/ { + aliases { + bluetooth0 = &bluetooth; + serial1 = &uart7; + }; + + max98360a: audio-codec-0 { + compatible = "maxim,max98360a"; + pinctrl-names = "default"; + pinctrl-0 = <&_en>; + sdmode-gpios = <&tlmm 63 GPIO_ACTIVE_HIGH>; + #sound-dai-cells = <0>; + }; + + wcd9385: audio-codec-1 { + compatible = "qcom,wcd9385-codec"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&wcd_reset_n>; + pinctrl-1 = <&wcd_reset_n_sleep>; + + reset-gpios = <&tlmm 83 GPIO_ACTIVE_LOW>; + + qcom,rx-device = <&wcd_rx>; + qcom,tx-device = <&wcd_tx>; + + vdd-rxtx-supply = <&vreg_l18b_1p8>; + vdd-io-supply = <&vreg_l18b_1p8>; + vdd-buck-supply = <&vreg_l17b_1p8>; + vdd-mic-bias-supply = <&vreg_bob>; + + qcom,micbias1-microvolt = <1800000>; + qcom,micbias2-microvolt = <1800000>; + qcom,micbias3-microvolt = <1800000>; + qcom,micbias4-microvolt = <1800000>; + + qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 + 500000 500000 500000>; + qcom,mbhc-headset-vthreshold-microvolt = <1700000>; + qcom,mbhc-headphone-vthreshold-microvolt = <50000>; + #sound-dai-cells = <1>; + }; + + gpio-keys { + compatible = "gpio-keys"; + label = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&key_vol_up_default>; + + key-volume-up { + label = "volume_up"; + gpios = <&pm7325_gpios 6 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + linux,code = <KEY_VOLUMEUP>; + gpio-key,wakeup; + debounce-interval = <15>; + linux,can-disable; + }; + }; + + nvme_3v3_regulator: nvme-3v3-regulator { + compatible = "regulator-fixed"; + regulator-name = "VLDO_3V3"; + + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + enable-active-high; + pinctrl-names = "default"; + pinctrl-0 = <&nvme_pwren>; + }; + + sound: sound { + compatible = "google,sc7280-herobrine"; + model = "sc7280-wcd938x-max98360a-1mic"; + + audio-routing = + "IN1_HPHL", "HPHL_OUT", + "IN2_HPHR", "HPHR_OUT", + "AMIC1", "MIC BIAS1", + "AMIC2", "MIC BIAS2", + "VA DMIC0", "MIC BIAS3", + "VA DMIC1", "MIC BIAS3", + "VA DMIC2", "MIC BIAS1", + "VA DMIC3", "MIC BIAS1", + "TX SWR_ADC0", "ADC1_OUTPUT", + "TX SWR_ADC1", "ADC2_OUTPUT", + "TX SWR_ADC2", "ADC3_OUTPUT", + "TX SWR_DMIC0", "DMIC1_OUTPUT", + "TX SWR_DMIC1", "DMIC2_OUTPUT", + "TX SWR_DMIC2", "DMIC3_OUTPUT", + "TX SWR_DMIC3", "DMIC4_OUTPUT", + "TX SWR_DMIC4", "DMIC5_OUTPUT", + "TX SWR_DMIC5", "DMIC6_OUTPUT", + "TX SWR_DMIC6", "DMIC7_OUTPUT", + "TX SWR_DMIC7", "DMIC8_OUTPUT"; + + qcom,msm-mbhc-hphl-swh = <1>; + qcom,msm-mbhc-gnd-swh = <1>; + + #address-cells = <1>; + #size-cells = <0>; + #sound-dai-cells = <0>; + + dai-link@0 { + link-name = "MAX98360A"; + reg = <0>; + + cpu { + sound-dai = <&lpass_cpu MI2S_SECONDARY>; + }; + + codec { + sound-dai = <&max98360a>; + }; + }; + + dai-link@1 { + link-name = "DisplayPort"; + reg = <1>; + + cpu { + sound-dai = <&lpass_cpu LPASS_DP_RX>; + }; + + codec { + sound-dai = <&mdss_dp>; + }; + }; + + dai-link@2 { + link-name = "WCD9385 Playback"; + reg = <2>; + + cpu { + sound-dai = <&lpass_cpu LPASS_CDC_DMA_RX0>; + }; + + codec { + sound-dai = <&wcd9385 0>, <&swr0 0>, <&lpass_rx_macro 0>; + }; + }; + + dai-link@3 { + link-name = "WCD9385 Capture"; + reg = <3>; + + cpu { + sound-dai = <&lpass_cpu LPASS_CDC_DMA_TX3>; + }; + + codec { + sound-dai = <&wcd9385 1>, <&swr1 0>, <&lpass_tx_macro 0>; + }; + }; + + dai-link@4 { + link-name = "DMIC"; + reg = <4>; + + cpu { + sound-dai = <&lpass_cpu LPASS_CDC_DMA_VA_TX0>; + }; + + codec { + sound-dai = <&lpass_va_macro 0>; + }; + }; + }; +}; + +&apps_rsc { + pm7325-regulators { + compatible = "qcom,pm7325-rpmh-regulators"; + qcom,pmic-id = "b"; + + vreg_s1b_1p8: smps1 { + regulator-min-microvolt = <1856000>; + regulator-max-microvolt = <2040000>; + }; + + vreg_s7b_0p9: smps7 { + regulator-min-microvolt = <535000>; + regulator-max-microvolt = <1120000>; + }; + + vreg_s8b_1p2: smps8 { + regulator-min-microvolt = <1256000>; + regulator-max-microvolt = <1500000>; + }; + + vreg_l1b_0p8: ldo1 { + regulator-min-microvolt = <825000>; + regulator-max-microvolt = <925000>; + }; + + vreg_l2b_3p0: ldo2 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <3544000>; + }; + + vreg_l6b_1p2: ldo6 { + regulator-min-microvolt = <1140000>; + regulator-max-microvolt = <1260000>; + }; + + vreg_l7b_2p9: ldo7 { + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <2960000>; + }; + + vreg_l8b_0p9: ldo8 { + regulator-min-microvolt = <870000>; + regulator-max-microvolt = <970000>; + }; + + vreg_l9b_1p2: ldo9 { + regulator-min-microvolt = <1080000>; + regulator-max-microvolt = <1304000>; + }; + + vreg_l11b_1p7: ldo11 { + regulator-min-microvolt = <1504000>; + regulator-max-microvolt = <2000000>; + }; + + vreg_l12b_0p8: ldo12 { + regulator-min-microvolt = <751000>; + regulator-max-microvolt = <824000>; + }; + + vreg_l13b_0p8: ldo13 { + regulator-min-microvolt = <530000>; + regulator-max-microvolt = <824000>; + }; + + vreg_l14b_1p2: ldo14 { + regulator-min-microvolt = <1080000>; + regulator-max-microvolt = <1304000>; + }; + + vreg_l15b_0p8: ldo15 { + regulator-min-microvolt = <765000>; + regulator-max-microvolt = <1020000>; + }; + + vreg_l16b_1p2: ldo16 { + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1300000>; + }; + + vreg_l17b_1p8: ldo17 { + regulator-min-microvolt = <1700000>; + regulator-max-microvolt = <1900000>; + }; + + vreg_l18b_1p8: ldo18 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2000000>; + }; + + vreg_l19b_1p8: ldo19 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + }; + + pm8350c-regulators { + compatible = "qcom,pm8350c-rpmh-regulators"; + qcom,pmic-id = "c"; + + vreg_s1c_2p2: smps1 { + regulator-min-microvolt = <2190000>; + regulator-max-microvolt = <2210000>; + }; + + vreg_s9c_1p0: smps9 { + regulator-min-microvolt = <1010000>; + regulator-max-microvolt = <1170000>; + }; + + vreg_l1c_1p8: ldo1 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1980000>; + }; + + vreg_l2c_1p8: ldo2 { + regulator-min-microvolt = <1620000>; + regulator-max-microvolt = <1980000>; + }; + + vreg_l3c_3p0: ldo3 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <3540000>; + }; + + vreg_l4c_1p8: ldo4 { + regulator-min-microvolt = <1620000>; + regulator-max-microvolt = <3300000>; + }; + + vreg_l5c_1p8: ldo5 { + regulator-min-microvolt = <1620000>; + regulator-max-microvolt = <3300000>; + }; + + vreg_l6c_2p9: ldo6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + vreg_l7c_3p0: ldo7 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3544000>; + }; + + vreg_l8c_1p8: ldo8 { + regulator-min-microvolt = <1620000>; + regulator-max-microvolt = <2000000>; + }; + + vreg_l9c_2p9: ldo9 { + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <2960000>; + }; + + vreg_l10c_0p8: ldo10 { + regulator-min-microvolt = <720000>; + regulator-max-microvolt = <1050000>; + }; + + vreg_l11c_2p8: ldo11 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <3544000>; + }; + + vreg_l12c_1p8: ldo12 { + regulator-min-microvolt = <1650000>; + regulator-max-microvolt = <2000000>; + }; + + vreg_l13c_3p0: ldo13 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <3544000>; + }; + + vreg_bob: bob { + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3960000>; + }; + }; +}; + +&gpi_dma0 { + status = "okay"; +}; + +&gpi_dma1 { + status = "okay"; +}; + +&ipa { + status = "okay"; + modem-init; +}; + +&lpass_cpu { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&mi2s1_data0>, <&mi2s1_sclk>, <&mi2s1_ws>; + + dai-link@1 { + reg = <MI2S_SECONDARY>; + qcom,playback-sd-lines = <0>; + }; + + dai-link@5 { + reg = <LPASS_DP_RX>; + }; + + dai-link@6 { + reg = <LPASS_CDC_DMA_RX0>; + }; + + dai-link@19 { + reg = <LPASS_CDC_DMA_TX3>; + }; + + dai-link@25 { + reg = <LPASS_CDC_DMA_VA_TX0>; + }; +}; + +&lpass_rx_macro { + status = "okay"; +}; + +&lpass_tx_macro { + status = "okay"; +}; + +&lpass_va_macro { + status = "okay"; + vdd-micb-supply = <&vreg_bob>; +}; + +&pcie1 { + status = "okay"; + perst-gpios = <&tlmm 2 GPIO_ACTIVE_LOW>; + + vddpe-3v3-supply = <&nvme_3v3_regulator>; + + pinctrl-names = "default"; + pinctrl-0 = <&pcie1_reset_n>, <&pcie1_wake_n>; +}; + +&pcie1_phy { + status = "okay"; + + vdda-phy-supply = <&vreg_l10c_0p8>; + vdda-pll-supply = <&vreg_l6b_1p2>; +}; + +&pmk8350_vadc { + pmk8350-die-temp@3 { + reg = <PMK8350_ADC7_DIE_TEMP>; + label = "pmk8350_die_temp"; + qcom,pre-scaling = <1 1>; + }; +}; + +&qfprom { + vcc-supply = <&vreg_l1c_1p8>; +}; + +&qupv3_id_0 { + status = "okay"; +}; + +&qupv3_id_1 { + status = "okay"; +}; + +&sdhc_1 { + status = "okay"; + + non-removable; + no-sd; + no-sdio; + + vmmc-supply = <&vreg_l7b_2p9>; + vqmmc-supply = <&vreg_l19b_1p8>; +}; + +&sdhc_2 { + status = "okay"; + + pinctrl-0 = <&sdc2_clk>, <&sdc2_cmd>, <&sdc2_data>, <&sd_cd>; + pinctrl-1 = <&sdc2_clk_sleep>, <&sdc2_cmd_sleep>, <&sdc2_data_sleep>, <&sd_cd>; + + vmmc-supply = <&vreg_l9c_2p9>; + vqmmc-supply = <&vreg_l6c_2p9>; + + cd-gpios = <&tlmm 91 GPIO_ACTIVE_LOW>; +}; + +&swr0 { + status = "okay"; + + wcd_rx: codec@0,4 { + compatible = "sdw20217010d00"; + reg = <0 4>; + qcom,rx-port-mapping = <1 2 3 4 5>; + }; +}; + +&swr1 { + status = "okay"; + + wcd_tx: codec@0,3 { + compatible = "sdw20217010d00"; + reg = <0 3>; + qcom,tx-port-mapping = <1 2 3 4>; + }; +}; + +&uart5 { + compatible = "qcom,geni-debug-uart"; + status = "okay"; +}; + +&usb_1 { + status = "okay"; +}; + +&usb_1_dwc3 { + dr_mode = "host"; +}; + +&usb_1_hsphy { + status = "okay"; + + vdda-pll-supply = <&vreg_l10c_0p8>; + vdda33-supply = <&vreg_l2b_3p0>; + vdda18-supply = <&vreg_l1c_1p8>; +}; + +&usb_1_qmpphy { + status = "okay"; + + vdda-phy-supply = <&vreg_l6b_1p2>; + vdda-pll-supply = <&vreg_l1b_0p8>; +}; + +&uart7 { + status = "okay"; + + /delete-property/interrupts; + interrupts-extended = <&intc GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>, + <&tlmm 31 IRQ_TYPE_EDGE_FALLING>; + pinctrl-names = "default", "sleep"; + pinctrl-1 = <&qup_uart7_sleep_cts>, <&qup_uart7_sleep_rts>, <&qup_uart7_sleep_tx>, <&qup_uart7_sleep_rx>; + + bluetooth: bluetooth { + compatible = "qcom,wcn6750-bt"; + pinctrl-names = "default"; + pinctrl-0 = <&bt_en>, <&sw_ctrl>; + enable-gpios = <&tlmm 85 GPIO_ACTIVE_HIGH>; + swctrl-gpios = <&tlmm 86 GPIO_ACTIVE_HIGH>; + vddaon-supply = <&vreg_s7b_0p9>; + vddbtcxmx-supply = <&vreg_s7b_0p9>; + vddrfacmn-supply = <&vreg_s7b_0p9>; + vddrfa0p8-supply = <&vreg_s7b_0p9>; + vddrfa1p7-supply = <&vreg_s1b_1p8>; + vddrfa1p2-supply = <&vreg_s8b_1p2>; + vddrfa2p2-supply = <&vreg_s1c_2p2>; + vddasd-supply = <&vreg_l11c_2p8>; + max-speed = <3200000>; + }; +}; + +/* PINCTRL - additions to nodes defined in sc7280.dtsi */ + +&dp_hot_plug_det { + bias-disable; +}; + +&lpass_dmic01_clk { + drive-strength = <8>; + bias-disable; +}; + +&lpass_dmic01_clk_sleep { + drive-strength = <2>; +}; + +&lpass_dmic01_data { + bias-pull-down; +}; + +&lpass_dmic23_clk { + drive-strength = <8>; + bias-disable; +}; + +&lpass_dmic23_clk_sleep { + drive-strength = <2>; +}; + +&lpass_dmic23_data { + bias-pull-down; +}; + +&lpass_rx_swr_clk { + drive-strength = <2>; + slew-rate = <1>; + bias-disable; +}; + +&lpass_rx_swr_clk_sleep { + bias-pull-down; +}; + +&lpass_rx_swr_data { + drive-strength = <2>; + slew-rate = <1>; + bias-bus-hold; +}; + +&lpass_rx_swr_data_sleep { + bias-pull-down; +}; + +&lpass_tx_swr_clk { + drive-strength = <2>; + slew-rate = <1>; + bias-disable; +}; + +&lpass_tx_swr_clk_sleep { + bias-pull-down; +}; + +&lpass_tx_swr_data { + drive-strength = <2>; + slew-rate = <1>; + bias-bus-hold; +}; + +&mi2s1_data0 { + drive-strength = <6>; + bias-disable; +}; + +&mi2s1_sclk { + drive-strength = <6>; + bias-disable; +}; + +&mi2s1_ws { + drive-strength = <6>; +}; + +&pm7325_gpios { + key_vol_up_default: key-vol-up-state { + pins = "gpio6"; + function = "normal"; + input-enable; + bias-pull-up; + power-source = <0>; + qcom,drive-strength = <3>; + }; +}; + +&pcie1_clkreq_n { + bias-pull-up; + drive-strength = <2>; +}; + +&qspi_cs0 { + bias-disable; +}; + +&qspi_clk { + bias-disable; +}; + +&qspi_data01 { + /* High-Z when no transfers; nice to park the lines */ + bias-pull-up; +}; + +&qup_uart5_tx { + drive-strength = <2>; + bias-disable; +}; + +&qup_uart5_rx { + drive-strength = <2>; + bias-pull-up; +}; + +&qup_uart7_cts { + /* + * Configure a bias-bus-hold on CTS to lower power + * usage when Bluetooth is turned off. Bus hold will + * maintain a low power state regardless of whether + * the Bluetooth module drives the pin in either + * direction or leaves the pin fully unpowered. + */ + bias-bus-hold; +}; + +&qup_uart7_rts { + /* We'll drive RTS, so no pull */ + drive-strength = <2>; + bias-disable; +}; + +&qup_uart7_tx { + /* We'll drive TX, so no pull */ + drive-strength = <2>; + bias-disable; +}; + +&qup_uart7_rx { + /* + * Configure a pull-up on RX. This is needed to avoid + * garbage data when the TX pin of the Bluetooth module is + * in tri-state (module powered off or not driving the + * signal yet). + */ + bias-pull-up; +}; + +&sdc1_clk { + bias-disable; + drive-strength = <16>; +}; + +&sdc1_cmd { + bias-pull-up; + drive-strength = <10>; +}; + +&sdc1_data { + bias-pull-up; + drive-strength = <10>; +}; + +&sdc1_rclk { + bias-pull-down; +}; + +&sdc2_clk { + bias-disable; + drive-strength = <16>; +}; + +&sdc2_cmd { + bias-pull-up; + drive-strength = <10>; +}; + +&sdc2_data { + bias-pull-up; + drive-strength = <10>; +}; + +&tlmm { + amp_en: amp-en { + pins = "gpio63"; + bias-pull-down; + drive-strength = <2>; + }; + + bt_en: bt-en-pins { + pins = "gpio85"; + function = "gpio"; + output-low; + bias-disable; + }; + + nvme_pwren: nvme-pwren-pins { + function = "gpio"; + }; + + pcie1_reset_n: pcie1-reset-n-pins { + pins = "gpio2"; + function = "gpio"; + + drive-strength = <16>; + output-low; + bias-disable; + }; + + pcie1_wake_n: pcie1-wake-n-pins { + pins = "gpio3"; + function = "gpio"; + + drive-strength = <2>; + bias-pull-up; + }; + + qup_uart7_sleep_cts: qup-uart7-sleep-cts-pins { + pins = "gpio28"; + function = "gpio"; + /* + * Configure a bias-bus-hold on CTS to lower power + * usage when Bluetooth is turned off. Bus hold will + * maintain a low power state regardless of whether + * the Bluetooth module drives the pin in either + * direction or leaves the pin fully unpowered. + */ + bias-bus-hold; + }; + + qup_uart7_sleep_rts: qup-uart7-sleep-rts-pins { + pins = "gpio29"; + function = "gpio"; + /* + * Configure pull-down on RTS. As RTS is active low + * signal, pull it low to indicate the BT SoC that it + * can wakeup the system anytime from suspend state by + * pulling RX low (by sending wakeup bytes). + */ + bias-pull-down; + }; + + qup_uart7_sleep_tx: qup-uart7-sleep-tx-pins { + pins = "gpio30"; + function = "gpio"; + /* + * Configure pull-up on TX when it isn't actively driven + * to prevent BT SoC from receiving garbage during sleep. + */ + bias-pull-up; + }; + + qup_uart7_sleep_rx: qup-uart7-sleep-rx-pins { + pins = "gpio31"; + function = "gpio"; + /* + * Configure a pull-up on RX. This is needed to avoid + * garbage data when the TX pin of the Bluetooth module + * is floating which may cause spurious wakeups. + */ + bias-pull-up; + }; + + sd_cd: sd-cd-pins { + pins = "gpio91"; + function = "gpio"; + bias-pull-up; + }; + + sw_ctrl: sw-ctrl-pins { + pins = "gpio86"; + function = "gpio"; + bias-pull-down; + }; + + wcd_reset_n: wcd-reset-n { + pins = "gpio83"; + function = "gpio"; + drive-strength = <8>; + }; + + wcd_reset_n_sleep: wcd-reset-n-sleep { + pins = "gpio83"; + function = "gpio"; + drive-strength = <8>; + bias-disable; + }; +}; |