1 files changed, 94 insertions, 0 deletions
diff --git a/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rg353p.dts b/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rg353p.dts
new file mode 100644
index 000000000..7a20e2d68
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rg353p.dts
@@ -0,0 +1,94 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include "rk3566-anbernic-rgxx3.dtsi"
+
+/ {
+	model = "RG353P";
+	compatible = "anbernic,rg353p", "rockchip,rk3566";
+
+	aliases {
+		mmc0 = &sdhci;
+		mmc1 = &sdmmc0;
+		mmc2 = &sdmmc1;
+		mmc3 = &sdmmc2;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		power-supply = <&vcc_sys>;
+		pwms = <&pwm4 0 25000 0>;
+	};
+};
+
+&gpio_keys_control {
+	button-a {
+		gpios = <&gpio3 RK_PC2 GPIO_ACTIVE_LOW>;
+		label = "EAST";
+		linux,code = <BTN_EAST>;
+	};
+
+	button-left {
+		gpios = <&gpio3 RK_PA6 GPIO_ACTIVE_LOW>;
+		label = "DPAD-LEFT";
+		linux,code = <BTN_DPAD_LEFT>;
+	};
+
+	button-r1 {
+		gpios = <&gpio3 RK_PB4 GPIO_ACTIVE_LOW>;
+		label = "TR";
+		linux,code = <BTN_TR>;
+	};
+
+	button-r2 {
+		gpios = <&gpio3 RK_PB3 GPIO_ACTIVE_LOW>;
+		label = "TR2";
+		linux,code = <BTN_TR2>;
+	};
+
+	button-right {
+		gpios = <&gpio3 RK_PA5 GPIO_ACTIVE_LOW>;
+		label = "DPAD-RIGHT";
+		linux,code = <BTN_DPAD_RIGHT>;
+	};
+
+	button-y {
+		gpios = <&gpio3 RK_PC1 GPIO_ACTIVE_LOW>;
+		label = "WEST";
+		linux,code = <BTN_WEST>;
+	};
+};
+
+&i2c0 {
+	/* This hardware is physically present but unused. */
+	power-monitor@62 {
+		compatible = "cellwise,cw2015";
+		reg = <0x62>;
+		status = "disabled";
+	};
+};
+
+&i2c2 {
+	pintctrl-names = "default";
+	pinctrl-0 = <&i2c2m1_xfer>;
+	status = "okay";
+};
+
+&pwm4 {
+	status = "okay";
+};
+
+&sdhci {
+	pinctrl-0 = <&emmc_bus8>, <&emmc_clk>, <&emmc_cmd>, <&emmc_datastrobe>, <&emmc_rstnout>;
+	pinctrl-names = "default";
+	bus-width = <8>;
+	mmc-hs200-1_8v;
+	non-removable;
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vcc_1v8>;
+	status = "okay";
+};