diff options
Diffstat (limited to 'arch/m68k/coldfire/m527x.c')
| -rw-r--r-- | arch/m68k/coldfire/m527x.c | 146 |
1 files changed, 146 insertions, 0 deletions
diff --git a/arch/m68k/coldfire/m527x.c b/arch/m68k/coldfire/m527x.c new file mode 100644 index 000000000..037f3e520 --- /dev/null +++ b/arch/m68k/coldfire/m527x.c @@ -0,0 +1,146 @@ +// SPDX-License-Identifier: GPL-2.0 +/***************************************************************************/ + +/* + * m527x.c -- platform support for ColdFire 527x based boards + * + * Sub-architcture dependent initialization code for the Freescale + * 5270/5271 and 5274/5275 CPUs. + * + * Copyright (C) 1999-2004, Greg Ungerer (gerg@snapgear.com) + * Copyright (C) 2001-2004, SnapGear Inc. (www.snapgear.com) + */ + +/***************************************************************************/ + +#include <linux/clkdev.h> +#include <linux/kernel.h> +#include <linux/param.h> +#include <linux/init.h> +#include <linux/io.h> +#include <asm/machdep.h> +#include <asm/coldfire.h> +#include <asm/mcfsim.h> +#include <asm/mcfuart.h> +#include <asm/mcfclk.h> + +/***************************************************************************/ + +DEFINE_CLK(pll, "pll.0", MCF_CLK); +DEFINE_CLK(sys, "sys.0", MCF_BUSCLK); + +static struct clk_lookup m527x_clk_lookup[] = { + CLKDEV_INIT(NULL, "pll.0", &clk_pll), + CLKDEV_INIT(NULL, "sys.0", &clk_sys), + CLKDEV_INIT("mcfpit.0", NULL, &clk_pll), + CLKDEV_INIT("mcfpit.1", NULL, &clk_pll), + CLKDEV_INIT("mcfpit.2", NULL, &clk_pll), + CLKDEV_INIT("mcfpit.3", NULL, &clk_pll), + CLKDEV_INIT("mcfuart.0", NULL, &clk_sys), + CLKDEV_INIT("mcfuart.1", NULL, &clk_sys), + CLKDEV_INIT("mcfuart.2", NULL, &clk_sys), + CLKDEV_INIT("mcfqspi.0", NULL, &clk_sys), + CLKDEV_INIT("fec.0", NULL, &clk_sys), + CLKDEV_INIT("fec.1", NULL, &clk_sys), + CLKDEV_INIT("imx1-i2c.0", NULL, &clk_sys), +}; + +/***************************************************************************/ + +static void __init m527x_qspi_init(void) +{ +#if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI) +#if defined(CONFIG_M5271) + u16 par; + + /* setup QSPS pins for QSPI with gpio CS control */ + writeb(0x1f, MCFGPIO_PAR_QSPI); + /* and CS2 & CS3 as gpio */ + par = readw(MCFGPIO_PAR_TIMER); + par &= 0x3f3f; + writew(par, MCFGPIO_PAR_TIMER); +#elif defined(CONFIG_M5275) + /* setup QSPS pins for QSPI with gpio CS control */ + writew(0x003e, MCFGPIO_PAR_QSPI); +#endif +#endif /* IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI) */ +} + +/***************************************************************************/ + +static void __init m527x_i2c_init(void) +{ +#if IS_ENABLED(CONFIG_I2C_IMX) +#if defined(CONFIG_M5271) + u8 par; + + /* setup Port FECI2C Pin Assignment Register for I2C */ + /* set PAR_SCL to SCL and PAR_SDA to SDA */ + par = readb(MCFGPIO_PAR_FECI2C); + par |= 0x0f; + writeb(par, MCFGPIO_PAR_FECI2C); +#elif defined(CONFIG_M5275) + u16 par; + + /* setup Port FECI2C Pin Assignment Register for I2C */ + /* set PAR_SCL to SCL and PAR_SDA to SDA */ + par = readw(MCFGPIO_PAR_FECI2C); + par |= 0x0f; + writew(par, MCFGPIO_PAR_FECI2C); +#endif +#endif /* IS_ENABLED(CONFIG_I2C_IMX) */ +} + +/***************************************************************************/ + +static void __init m527x_uarts_init(void) +{ + u16 sepmask; + + /* + * External Pin Mask Setting & Enable External Pin for Interface + */ + sepmask = readw(MCFGPIO_PAR_UART); + sepmask |= UART0_ENABLE_MASK | UART1_ENABLE_MASK | UART2_ENABLE_MASK; + writew(sepmask, MCFGPIO_PAR_UART); +} + +/***************************************************************************/ + +static void __init m527x_fec_init(void) +{ + u8 v; + + /* Set multi-function pins to ethernet mode for fec0 */ +#if defined(CONFIG_M5271) + v = readb(MCFGPIO_PAR_FECI2C); + writeb(v | 0xf0, MCFGPIO_PAR_FECI2C); +#else + u16 par; + + par = readw(MCFGPIO_PAR_FECI2C); + writew(par | 0xf00, MCFGPIO_PAR_FECI2C); + v = readb(MCFGPIO_PAR_FEC0HL); + writeb(v | 0xc0, MCFGPIO_PAR_FEC0HL); + + /* Set multi-function pins to ethernet mode for fec1 */ + par = readw(MCFGPIO_PAR_FECI2C); + writew(par | 0xa0, MCFGPIO_PAR_FECI2C); + v = readb(MCFGPIO_PAR_FEC1HL); + writeb(v | 0xc0, MCFGPIO_PAR_FEC1HL); +#endif +} + +/***************************************************************************/ + +void __init config_BSP(char *commandp, int size) +{ + mach_sched_init = hw_timer_init; + m527x_uarts_init(); + m527x_fec_init(); + m527x_qspi_init(); + m527x_i2c_init(); + clkdev_add_table(m527x_clk_lookup, ARRAY_SIZE(m527x_clk_lookup)); +} + +/***************************************************************************/ |