diff options
Diffstat (limited to 'arch/m68k/ifpsp060/TEST.DOC')
| -rw-r--r-- | arch/m68k/ifpsp060/TEST.DOC | 208 |
1 files changed, 208 insertions, 0 deletions
diff --git a/arch/m68k/ifpsp060/TEST.DOC b/arch/m68k/ifpsp060/TEST.DOC new file mode 100644 index 000000000..1ba3aef15 --- /dev/null +++ b/arch/m68k/ifpsp060/TEST.DOC @@ -0,0 +1,208 @@ +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +MOTOROLA MICROPROCESSOR & MEMORY TECHNOLOGY GROUP +M68000 Hi-Performance Microprocessor Division +M68060 Software Package +Production Release P1.00 -- October 10, 1994 + +M68060 Software Package Copyright © 1993, 1994 Motorola Inc. All rights reserved. + +THE SOFTWARE is provided on an "AS IS" basis and without warranty. +To the maximum extent permitted by applicable law, +MOTOROLA DISCLAIMS ALL WARRANTIES WHETHER EXPRESS OR IMPLIED, +INCLUDING IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE +and any warranty against infringement with regard to the SOFTWARE +(INCLUDING ANY MODIFIED VERSIONS THEREOF) and any accompanying written materials. + +To the maximum extent permitted by applicable law, +IN NO EVENT SHALL MOTOROLA BE LIABLE FOR ANY DAMAGES WHATSOEVER +(INCLUDING WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS PROFITS, +BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION, OR OTHER PECUNIARY LOSS) +ARISING OF THE USE OR INABILITY TO USE THE SOFTWARE. +Motorola assumes no responsibility for the maintenance and support of the SOFTWARE. + +You are hereby granted a copyright license to use, modify, and distribute the SOFTWARE +so long as this entire notice is retained without alteration in any modified and/or +redistributed versions, and that such modified versions are clearly identified as such. +No licenses are granted by implication, estoppel or otherwise under any patents +or trademarks of Motorola, Inc. +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +68060 SOFTWARE PACKAGE (Kernel version) SIMPLE TESTS +----------------------------------------------------- + +The files itest.sa and ftest.sa contain simple tests to check +the state of the 68060ISP and 68060FPSP once they have been installed. + +Release file format: +-------------------- +The release files itest.sa and ftest.sa are essentially +hexadecimal images of the actual tests. This format is the +ONLY format that will be supported. The hex images were created +by assembling the source code and then converting the resulting +binary output images into ASCII text files. The hexadecimal +numbers are listed using the Motorola Assembly syntax assembler +directive "dc.l" (define constant longword). The files can be +converted to other assembly syntaxes by using any word processor +with a global search and replace function. + +To assist in assembling and linking these modules with other modules, +the installer should add symbolic labels to the top of the files. +This will allow the calling routines to access the entry points +of these packages. + +The source code itest.s and ftest.s have been included but only +for documentation purposes. + +Release file structure: +----------------------- + +(top of module) + ----------------- + | | - 128 byte-sized section + (1) | Call-Out | - 4 bytes per entry (user fills these in) + | | + ----------------- + | | - 8 bytes per entry + (2) | Entry Point | - user does "bsr" or "jsr" to this address + | | + ----------------- + | | - code section + (3) ~ ~ + | | + ----------------- +(bottom of module) + +The first section of this module is the "Call-out" section. This section +is NOT INCLUDED in {i,f}test.sa (an example "Call-out" section is provided at +the end of this file). The purpose of this section is to allow the test +routines to reference external printing functions that must be provided +by the host operating system. This section MUST be exactly 128 bytes in +size. There are 32 fields, each 4 bytes in size. Each field corresponds +to a function required by the test packages (these functions and their +location are listed in "68060{ISP,FPSP}-TEST call-outs" below). Each field +entry should contain the address of the corresponding function RELATIVE to +the starting address of the "call-out" section. The "Call-out" section must +sit adjacent to the {i,f}test.sa image in memory. Since itest.sa and ftest.sa +are individual tests, they each require their own "Call-out" sections. + +The second section, the "Entry-point" section, is used by external routines +to access the test routines. Since the {i,f}test.sa hex files contain +no symbol names, this section contains function entry points that are fixed +with respect to the top of the package. The currently defined entry-points +are listed in section "68060{ISP,FPSP}-TEST entry points" below. A calling +routine would simply execute a "bsr" or "jsr" that jumped to the selected +function entry-point. + +For example, to run the 060ISP test, write a program that includes the +itest.sa data and execute something similar to: + + bsr _060ISP_TEST+128+0 + +(_060ISP_TEST is the starting address of the "Call-out" section; the "Call-out" +section is 128 bytes long; and the 68060ISP test entry point is located +0 bytes from the top of the "Entry-point" section.) + +The third section is the code section. After entering through an "Entry-point", +the entry code jumps to the appropriate test code within the code section. + +68060ISP-TEST Call-outs: +------------------------ +0x0: _print_string() +0x4: _print_number() + +68060FPSP-TEST Call-outs: +------------------------- +0x0: _print_string() +0x4: _print_number() + +The test packages call _print_string() and _print_number() +as subroutines and expect the main program to print a string +or a number to a file or to the screen. +In "C"-like fashion, the test program calls: + + print_string("Test passed"); + + or + + print_number(20); + +For _print_string(), the test programs pass a longword address +of the string on the stack. For _print_number(), the test programs pass +a longword number to be printed. + +For debugging purposes, after the main program performs a "print" +for a test package, it should flush the output so that it's not +buffered. In this way, if the test program crashes, at least the previous +statements printed will be seen. + +68060ISP-TEST Entry-points: +--------------------------- +0x0: integer test + +68060FPSP-TEST Entry-points: +---------------------------- +0x00: main fp test +0x08: FP unimplemented test +0x10: FP enabled snan/operr/ovfl/unfl/dz/inex + +The floating-point unit test has 3 entry points which will require +3 different calls to the package if each of the three following tests +is desired: + +main fp test: tests (1) unimp effective address exception + (2) unsupported data type exceptions + (3) non-maskable overflow/underflow exceptions + +FP unimplemented: tests FP unimplemented exception. this one is + separate from the previous tests for systems that don't + want FP unimplemented instructions. + +FP enabled: tests enabled snan/operr/ovfl/unfl/dz/inex. + basically, it enables each of these exceptions and forces + each using an implemented FP instruction. this process + exercises _fpsp_{snan,operr,ovfl,unfl,dz,inex}() and + _real_{snan,operr,ovfl,unfl,dz,inex}(). the test expects + _real_XXXX() to do nothing except clear the exception + and "rte". if a system's _real_XXXX() handler creates an + alternate result, the test will print "failed" but this + is acceptable. + +Miscellaneous: +-------------- +Again, itest.sa and ftest.sa are simple tests and do not thoroughly +test all 68060SP connections. For example, they do not test connections +to _real_access(), _real_trace(), _real_trap(), etc. because these +will be system-implemented several different ways and the test packages +must remain system independent. + +Example test package set-up: +---------------------------- +_print_str: + . # provided by system + rts + +_print_num: + . # provided by system + rts + + . + . + bsr _060FPSP_TEST+128+0 + . + . + rts + +# beginning of "Call-out" section; provided by integrator. +# MUST be 128 bytes long. +_060FPSP_TEST: + long _print_str - _060FPSP_TEST + long _print_num - _060FPSP_TEST + space 120 + +# ftest.sa starts here; start of "Entry-point" section. + long 0x60ff0000, 0x00002346 + long 0x60ff0000, 0x00018766 + long 0x60ff0000, 0x00023338 + long 0x24377299, 0xab2643ea + . + . + . |