diff options
Diffstat (limited to '')
| -rw-r--r-- | arch/microblaze/Kconfig | 225 | ||||
| -rw-r--r-- | arch/microblaze/Kconfig.debug | 1 | ||||
| -rw-r--r-- | arch/microblaze/Kconfig.platform | 71 |
3 files changed, 297 insertions, 0 deletions
diff --git a/arch/microblaze/Kconfig b/arch/microblaze/Kconfig new file mode 100644 index 000000000..4ebb56d6d --- /dev/null +++ b/arch/microblaze/Kconfig @@ -0,0 +1,225 @@ +# SPDX-License-Identifier: GPL-2.0-only +config MICROBLAZE + def_bool y + select ARCH_32BIT_OFF_T + select ARCH_NO_SWAP + select ARCH_HAS_DMA_PREP_COHERENT + select ARCH_HAS_GCOV_PROFILE_ALL + select ARCH_HAS_SYNC_DMA_FOR_CPU + select ARCH_HAS_SYNC_DMA_FOR_DEVICE + select ARCH_MIGHT_HAVE_PC_PARPORT + select ARCH_WANT_IPC_PARSE_VERSION + select BUILDTIME_TABLE_SORT + select TIMER_OF + select CLONE_BACKWARDS3 + select COMMON_CLK + select DMA_DIRECT_REMAP + select GENERIC_ATOMIC64 + select GENERIC_CPU_DEVICES + select GENERIC_IDLE_POLL_SETUP + select GENERIC_IRQ_PROBE + select GENERIC_IRQ_SHOW + select GENERIC_PCI_IOMAP + select GENERIC_SCHED_CLOCK + select HAVE_ARCH_HASH + select HAVE_ARCH_KGDB + select HAVE_ARCH_SECCOMP + select HAVE_DEBUG_KMEMLEAK + select HAVE_DMA_CONTIGUOUS + select HAVE_DYNAMIC_FTRACE + select HAVE_FTRACE_MCOUNT_RECORD + select HAVE_FUNCTION_GRAPH_TRACER + select HAVE_FUNCTION_TRACER + select HAVE_PCI + select IRQ_DOMAIN + select XILINX_INTC + select MODULES_USE_ELF_RELA + select OF + select OF_EARLY_FLATTREE + select PCI_DOMAINS_GENERIC if PCI + select PCI_SYSCALL if PCI + select CPU_NO_EFFICIENT_FFS + select MMU_GATHER_NO_RANGE + select SPARSE_IRQ + select ZONE_DMA + select TRACE_IRQFLAGS_SUPPORT + select GENERIC_IRQ_MULTI_HANDLER + +# Endianness selection +choice + prompt "Endianness selection" + default CPU_LITTLE_ENDIAN + help + microblaze architectures can be configured for either little or + big endian formats. Be sure to select the appropriate mode. + +config CPU_BIG_ENDIAN + bool "Big endian" + +config CPU_LITTLE_ENDIAN + bool "Little endian" + +endchoice + +config ARCH_HAS_ILOG2_U32 + def_bool n + +config ARCH_HAS_ILOG2_U64 + def_bool n + +config GENERIC_HWEIGHT + def_bool y + +config GENERIC_CALIBRATE_DELAY + def_bool y + +config GENERIC_CSUM + def_bool y + +config STACKTRACE_SUPPORT + def_bool y + +config LOCKDEP_SUPPORT + def_bool y + +source "arch/microblaze/Kconfig.platform" + +menu "Processor type and features" + +source "kernel/Kconfig.hz" + +config MMU + def_bool y + +comment "Boot options" + +config CMDLINE_BOOL + bool "Default bootloader kernel arguments" + +config CMDLINE + string "Default kernel command string" + depends on CMDLINE_BOOL + default "console=ttyUL0,115200" + help + On some architectures there is currently no way for the boot loader + to pass arguments to the kernel. For these architectures, you should + supply some command-line options at build time by entering them + here. + +config CMDLINE_FORCE + bool "Force default kernel command string" + depends on CMDLINE_BOOL + default n + help + Set this to have arguments from the default kernel command string + override those passed by the boot loader. + +endmenu + +menu "Kernel features" + +config NR_CPUS + int + default "1" + +config ADVANCED_OPTIONS + bool "Prompt for advanced kernel configuration options" + help + This option will enable prompting for a variety of advanced kernel + configuration options. These options can cause the kernel to not + work if they are set incorrectly, but can be used to optimize certain + aspects of kernel memory management. + + Unless you know what you are doing, say N here. + +comment "Default settings for advanced configuration options are used" + depends on !ADVANCED_OPTIONS + +config HIGHMEM + bool "High memory support" + select KMAP_LOCAL + help + The address space of Microblaze processors is only 4 Gigabytes large + and it has to accommodate user address space, kernel address + space as well as some memory mapped IO. That means that, if you + have a large amount of physical memory and/or IO, not all of the + memory can be "permanently mapped" by the kernel. The physical + memory that is not permanently mapped is called "high memory". + + If unsure, say n. + +config LOWMEM_SIZE_BOOL + bool "Set maximum low memory" + depends on ADVANCED_OPTIONS + help + This option allows you to set the maximum amount of memory which + will be used as "low memory", that is, memory which the kernel can + access directly, without having to set up a kernel virtual mapping. + This can be useful in optimizing the layout of kernel virtual + memory. + + Say N here unless you know what you are doing. + +config LOWMEM_SIZE + hex "Maximum low memory size (in bytes)" if LOWMEM_SIZE_BOOL + default "0x30000000" + +config MANUAL_RESET_VECTOR + hex "Microblaze reset vector address setup" + default "0x0" + help + Set this option to have the kernel override the CPU Reset vector. + If zero, no change will be made to the MicroBlaze reset vector at + address 0x0. + If non-zero, a jump instruction to this address, will be written + to the reset vector at address 0x0. + If you are unsure, set it to default value 0x0. + +config KERNEL_START_BOOL + bool "Set custom kernel base address" + depends on ADVANCED_OPTIONS + help + This option allows you to set the kernel virtual address at which + the kernel will map low memory (the kernel image will be linked at + this address). This can be useful in optimizing the virtual memory + layout of the system. + + Say N here unless you know what you are doing. + +config KERNEL_START + hex "Virtual address of kernel base" if KERNEL_START_BOOL + default "0xc0000000" + +config TASK_SIZE_BOOL + bool "Set custom user task size" + depends on ADVANCED_OPTIONS + help + This option allows you to set the amount of virtual address space + allocated to user tasks. This can be useful in optimizing the + virtual memory layout of the system. + + Say N here unless you know what you are doing. + +config TASK_SIZE + hex "Size of user task space" if TASK_SIZE_BOOL + default "0x80000000" + +config MB_MANAGER + bool "Support for Microblaze Manager" + depends on ADVANCED_OPTIONS + help + This option enables API for configuring the MicroBlaze manager + control register, which is consumed by the break handler to + block the break. + + Say N here unless you know what you are doing. + +endmenu + +menu "Bus Options" + +config PCI_XILINX + bool "Xilinx PCI host bridge support" + depends on PCI + +endmenu diff --git a/arch/microblaze/Kconfig.debug b/arch/microblaze/Kconfig.debug new file mode 100644 index 000000000..a4e40e534 --- /dev/null +++ b/arch/microblaze/Kconfig.debug @@ -0,0 +1 @@ +# SPDX-License-Identifier: GPL-2.0-only diff --git a/arch/microblaze/Kconfig.platform b/arch/microblaze/Kconfig.platform new file mode 100644 index 000000000..7795f90da --- /dev/null +++ b/arch/microblaze/Kconfig.platform @@ -0,0 +1,71 @@ +# SPDX-License-Identifier: GPL-2.0-only +# For a description of the syntax of this configuration file, +# see Documentation/kbuild/kconfig-language.rst. +# +# Platform selection Kconfig menu for MicroBlaze targets +# + +menu "Platform options" + +config OPT_LIB_FUNCTION + bool "Optimalized lib function" + default y + help + Allows turn on optimalized library function (memcpy and memmove). + They are optimized by using word alignment. This will work + fine if both source and destination are aligned on the same + boundary. However, if they are aligned on different boundaries + shifts will be necessary. This might result in bad performance + on MicroBlaze systems without a barrel shifter. + +config OPT_LIB_ASM + bool "Optimalized lib function ASM" + depends on OPT_LIB_FUNCTION && (XILINX_MICROBLAZE0_USE_BARREL = 1) + depends on CPU_BIG_ENDIAN + default n + help + Allows turn on optimalized library function (memcpy and memmove). + Function are written in asm code. + +# Definitions for MICROBLAZE0 +comment "Definitions for MICROBLAZE0" + +config KERNEL_BASE_ADDR + hex "Physical address where Linux Kernel is" + default "0x90000000" + help + BASE Address for kernel + +config XILINX_MICROBLAZE0_FAMILY + string "Targeted FPGA family" + default "virtex5" + +config XILINX_MICROBLAZE0_USE_MSR_INSTR + int "USE_MSR_INSTR range (0:1)" + default 0 + +config XILINX_MICROBLAZE0_USE_PCMP_INSTR + int "USE_PCMP_INSTR range (0:1)" + default 0 + +config XILINX_MICROBLAZE0_USE_BARREL + int "USE_BARREL range (0:1)" + default 0 + +config XILINX_MICROBLAZE0_USE_DIV + int "USE_DIV range (0:1)" + default 0 + +config XILINX_MICROBLAZE0_USE_HW_MUL + int "USE_HW_MUL values (0=NONE, 1=MUL32, 2=MUL64)" + default 0 + +config XILINX_MICROBLAZE0_USE_FPU + int "USE_FPU values (0=NONE, 1=BASIC, 2=EXTENDED)" + default 0 + +config XILINX_MICROBLAZE0_HW_VER + string "Core version number" + default "7.10.d" + +endmenu |