summaryrefslogtreecommitdiffstats
path: root/arch/mips/loongson32/common/platform.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/mips/loongson32/common/platform.c')
-rw-r--r--arch/mips/loongson32/common/platform.c311
1 files changed, 311 insertions, 0 deletions
diff --git a/arch/mips/loongson32/common/platform.c b/arch/mips/loongson32/common/platform.c
new file mode 100644
index 000000000..311dc1580
--- /dev/null
+++ b/arch/mips/loongson32/common/platform.c
@@ -0,0 +1,311 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (c) 2011-2016 Zhang, Keguang <keguang.zhang@gmail.com>
+ */
+
+#include <linux/clk.h>
+#include <linux/dma-mapping.h>
+#include <linux/err.h>
+#include <linux/mtd/partitions.h>
+#include <linux/sizes.h>
+#include <linux/phy.h>
+#include <linux/serial_8250.h>
+#include <linux/stmmac.h>
+#include <linux/usb/ehci_pdriver.h>
+
+#include <platform.h>
+#include <loongson1.h>
+#include <cpufreq.h>
+#include <dma.h>
+#include <nand.h>
+
+/* 8250/16550 compatible UART */
+#define LS1X_UART(_id) \
+ { \
+ .mapbase = LS1X_UART ## _id ## _BASE, \
+ .irq = LS1X_UART ## _id ## _IRQ, \
+ .iotype = UPIO_MEM, \
+ .flags = UPF_IOREMAP | UPF_FIXED_TYPE, \
+ .type = PORT_16550A, \
+ }
+
+static struct plat_serial8250_port ls1x_serial8250_pdata[] = {
+ LS1X_UART(0),
+ LS1X_UART(1),
+ LS1X_UART(2),
+ LS1X_UART(3),
+ {},
+};
+
+struct platform_device ls1x_uart_pdev = {
+ .name = "serial8250",
+ .id = PLAT8250_DEV_PLATFORM,
+ .dev = {
+ .platform_data = ls1x_serial8250_pdata,
+ },
+};
+
+void __init ls1x_serial_set_uartclk(struct platform_device *pdev)
+{
+ struct clk *clk;
+ struct plat_serial8250_port *p;
+
+ clk = clk_get(&pdev->dev, pdev->name);
+ if (IS_ERR(clk)) {
+ pr_err("unable to get %s clock, err=%ld",
+ pdev->name, PTR_ERR(clk));
+ return;
+ }
+ clk_prepare_enable(clk);
+
+ for (p = pdev->dev.platform_data; p->flags != 0; ++p)
+ p->uartclk = clk_get_rate(clk);
+}
+
+/* CPUFreq */
+static struct plat_ls1x_cpufreq ls1x_cpufreq_pdata = {
+ .clk_name = "cpu_clk",
+ .osc_clk_name = "osc_clk",
+ .max_freq = 266 * 1000,
+ .min_freq = 33 * 1000,
+};
+
+struct platform_device ls1x_cpufreq_pdev = {
+ .name = "ls1x-cpufreq",
+ .dev = {
+ .platform_data = &ls1x_cpufreq_pdata,
+ },
+};
+
+/* Synopsys Ethernet GMAC */
+static struct stmmac_mdio_bus_data ls1x_mdio_bus_data = {
+ .phy_mask = 0,
+};
+
+static struct stmmac_dma_cfg ls1x_eth_dma_cfg = {
+ .pbl = 1,
+};
+
+int ls1x_eth_mux_init(struct platform_device *pdev, void *priv)
+{
+ struct plat_stmmacenet_data *plat_dat = NULL;
+ u32 val;
+
+ val = __raw_readl(LS1X_MUX_CTRL1);
+
+#if defined(CONFIG_LOONGSON1_LS1B)
+ plat_dat = dev_get_platdata(&pdev->dev);
+ if (plat_dat->bus_id) {
+ __raw_writel(__raw_readl(LS1X_MUX_CTRL0) | GMAC1_USE_UART1 |
+ GMAC1_USE_UART0, LS1X_MUX_CTRL0);
+ switch (plat_dat->phy_interface) {
+ case PHY_INTERFACE_MODE_RGMII:
+ val &= ~(GMAC1_USE_TXCLK | GMAC1_USE_PWM23);
+ break;
+ case PHY_INTERFACE_MODE_MII:
+ val |= (GMAC1_USE_TXCLK | GMAC1_USE_PWM23);
+ break;
+ default:
+ pr_err("unsupported mii mode %d\n",
+ plat_dat->phy_interface);
+ return -ENOTSUPP;
+ }
+ val &= ~GMAC1_SHUT;
+ } else {
+ switch (plat_dat->phy_interface) {
+ case PHY_INTERFACE_MODE_RGMII:
+ val &= ~(GMAC0_USE_TXCLK | GMAC0_USE_PWM01);
+ break;
+ case PHY_INTERFACE_MODE_MII:
+ val |= (GMAC0_USE_TXCLK | GMAC0_USE_PWM01);
+ break;
+ default:
+ pr_err("unsupported mii mode %d\n",
+ plat_dat->phy_interface);
+ return -ENOTSUPP;
+ }
+ val &= ~GMAC0_SHUT;
+ }
+ __raw_writel(val, LS1X_MUX_CTRL1);
+#elif defined(CONFIG_LOONGSON1_LS1C)
+ plat_dat = dev_get_platdata(&pdev->dev);
+
+ val &= ~PHY_INTF_SELI;
+ if (plat_dat->phy_interface == PHY_INTERFACE_MODE_RMII)
+ val |= 0x4 << PHY_INTF_SELI_SHIFT;
+ __raw_writel(val, LS1X_MUX_CTRL1);
+
+ val = __raw_readl(LS1X_MUX_CTRL0);
+ __raw_writel(val & (~GMAC_SHUT), LS1X_MUX_CTRL0);
+#endif
+
+ return 0;
+}
+
+static struct plat_stmmacenet_data ls1x_eth0_pdata = {
+ .bus_id = 0,
+ .phy_addr = -1,
+#if defined(CONFIG_LOONGSON1_LS1B)
+ .phy_interface = PHY_INTERFACE_MODE_MII,
+#elif defined(CONFIG_LOONGSON1_LS1C)
+ .phy_interface = PHY_INTERFACE_MODE_RMII,
+#endif
+ .mdio_bus_data = &ls1x_mdio_bus_data,
+ .dma_cfg = &ls1x_eth_dma_cfg,
+ .has_gmac = 1,
+ .tx_coe = 1,
+ .rx_queues_to_use = 1,
+ .tx_queues_to_use = 1,
+ .init = ls1x_eth_mux_init,
+};
+
+static struct resource ls1x_eth0_resources[] = {
+ [0] = {
+ .start = LS1X_GMAC0_BASE,
+ .end = LS1X_GMAC0_BASE + SZ_64K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .name = "macirq",
+ .start = LS1X_GMAC0_IRQ,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device ls1x_eth0_pdev = {
+ .name = "stmmaceth",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(ls1x_eth0_resources),
+ .resource = ls1x_eth0_resources,
+ .dev = {
+ .platform_data = &ls1x_eth0_pdata,
+ },
+};
+
+#ifdef CONFIG_LOONGSON1_LS1B
+static struct plat_stmmacenet_data ls1x_eth1_pdata = {
+ .bus_id = 1,
+ .phy_addr = -1,
+ .phy_interface = PHY_INTERFACE_MODE_MII,
+ .mdio_bus_data = &ls1x_mdio_bus_data,
+ .dma_cfg = &ls1x_eth_dma_cfg,
+ .has_gmac = 1,
+ .tx_coe = 1,
+ .rx_queues_to_use = 1,
+ .tx_queues_to_use = 1,
+ .init = ls1x_eth_mux_init,
+};
+
+static struct resource ls1x_eth1_resources[] = {
+ [0] = {
+ .start = LS1X_GMAC1_BASE,
+ .end = LS1X_GMAC1_BASE + SZ_64K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .name = "macirq",
+ .start = LS1X_GMAC1_IRQ,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device ls1x_eth1_pdev = {
+ .name = "stmmaceth",
+ .id = 1,
+ .num_resources = ARRAY_SIZE(ls1x_eth1_resources),
+ .resource = ls1x_eth1_resources,
+ .dev = {
+ .platform_data = &ls1x_eth1_pdata,
+ },
+};
+#endif /* CONFIG_LOONGSON1_LS1B */
+
+/* GPIO */
+static struct resource ls1x_gpio0_resources[] = {
+ [0] = {
+ .start = LS1X_GPIO0_BASE,
+ .end = LS1X_GPIO0_BASE + SZ_4 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+struct platform_device ls1x_gpio0_pdev = {
+ .name = "ls1x-gpio",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(ls1x_gpio0_resources),
+ .resource = ls1x_gpio0_resources,
+};
+
+static struct resource ls1x_gpio1_resources[] = {
+ [0] = {
+ .start = LS1X_GPIO1_BASE,
+ .end = LS1X_GPIO1_BASE + SZ_4 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+struct platform_device ls1x_gpio1_pdev = {
+ .name = "ls1x-gpio",
+ .id = 1,
+ .num_resources = ARRAY_SIZE(ls1x_gpio1_resources),
+ .resource = ls1x_gpio1_resources,
+};
+
+/* USB EHCI */
+static u64 ls1x_ehci_dmamask = DMA_BIT_MASK(32);
+
+static struct resource ls1x_ehci_resources[] = {
+ [0] = {
+ .start = LS1X_EHCI_BASE,
+ .end = LS1X_EHCI_BASE + SZ_32K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = LS1X_EHCI_IRQ,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct usb_ehci_pdata ls1x_ehci_pdata = {
+};
+
+struct platform_device ls1x_ehci_pdev = {
+ .name = "ehci-platform",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(ls1x_ehci_resources),
+ .resource = ls1x_ehci_resources,
+ .dev = {
+ .dma_mask = &ls1x_ehci_dmamask,
+ .platform_data = &ls1x_ehci_pdata,
+ },
+};
+
+/* Real Time Clock */
+void __init ls1x_rtc_set_extclk(struct platform_device *pdev)
+{
+ u32 val = __raw_readl(LS1X_RTC_CTRL);
+
+ if (!(val & RTC_EXTCLK_OK))
+ __raw_writel(val | RTC_EXTCLK_EN, LS1X_RTC_CTRL);
+}
+
+struct platform_device ls1x_rtc_pdev = {
+ .name = "ls1x-rtc",
+ .id = -1,
+};
+
+/* Watchdog */
+static struct resource ls1x_wdt_resources[] = {
+ {
+ .start = LS1X_WDT_BASE,
+ .end = LS1X_WDT_BASE + SZ_16 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+struct platform_device ls1x_wdt_pdev = {
+ .name = "ls1x-wdt",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(ls1x_wdt_resources),
+ .resource = ls1x_wdt_resources,
+};