diff options
Diffstat (limited to '')
| -rw-r--r-- | arch/mips/pci/pci-xtalk-bridge.c | 760 |
1 files changed, 760 insertions, 0 deletions
diff --git a/arch/mips/pci/pci-xtalk-bridge.c b/arch/mips/pci/pci-xtalk-bridge.c new file mode 100644 index 000000000..ab9bedb82 --- /dev/null +++ b/arch/mips/pci/pci-xtalk-bridge.c @@ -0,0 +1,760 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2003 Christoph Hellwig (hch@lst.de) + * Copyright (C) 1999, 2000, 04 Ralf Baechle (ralf@linux-mips.org) + * Copyright (C) 1999, 2000 Silicon Graphics, Inc. + */ +#include <linux/kernel.h> +#include <linux/export.h> +#include <linux/pci.h> +#include <linux/smp.h> +#include <linux/dma-direct.h> +#include <linux/platform_device.h> +#include <linux/platform_data/xtalk-bridge.h> +#include <linux/nvmem-consumer.h> +#include <linux/crc16.h> +#include <linux/irqdomain.h> + +#include <asm/pci/bridge.h> +#include <asm/paccess.h> +#include <asm/sn/irq_alloc.h> +#include <asm/sn/ioc3.h> + +#define CRC16_INIT 0 +#define CRC16_VALID 0xb001 + +/* + * Common phys<->dma mapping for platforms using pci xtalk bridge + */ +dma_addr_t phys_to_dma(struct device *dev, phys_addr_t paddr) +{ + struct pci_dev *pdev = to_pci_dev(dev); + struct bridge_controller *bc = BRIDGE_CONTROLLER(pdev->bus); + + return bc->baddr + paddr; +} + +phys_addr_t dma_to_phys(struct device *dev, dma_addr_t dma_addr) +{ + return dma_addr & ~(0xffUL << 56); +} + +/* + * Most of the IOC3 PCI config register aren't present + * we emulate what is needed for a normal PCI enumeration + */ +static int ioc3_cfg_rd(void *addr, int where, int size, u32 *value, u32 sid) +{ + u32 cf, shift, mask; + + switch (where & ~3) { + case 0x00 ... 0x10: + case 0x40 ... 0x44: + if (get_dbe(cf, (u32 *)addr)) + return PCIBIOS_DEVICE_NOT_FOUND; + break; + case 0x2c: + cf = sid; + break; + case 0x3c: + /* emulate sane interrupt pin value */ + cf = 0x00000100; + break; + default: + cf = 0; + break; + } + shift = (where & 3) << 3; + mask = 0xffffffffU >> ((4 - size) << 3); + *value = (cf >> shift) & mask; + + return PCIBIOS_SUCCESSFUL; +} + +static int ioc3_cfg_wr(void *addr, int where, int size, u32 value) +{ + u32 cf, shift, mask, smask; + + if ((where >= 0x14 && where < 0x40) || (where >= 0x48)) + return PCIBIOS_SUCCESSFUL; + + if (get_dbe(cf, (u32 *)addr)) + return PCIBIOS_DEVICE_NOT_FOUND; + + shift = ((where & 3) << 3); + mask = (0xffffffffU >> ((4 - size) << 3)); + smask = mask << shift; + + cf = (cf & ~smask) | ((value & mask) << shift); + if (put_dbe(cf, (u32 *)addr)) + return PCIBIOS_DEVICE_NOT_FOUND; + + return PCIBIOS_SUCCESSFUL; +} + +static void bridge_disable_swapping(struct pci_dev *dev) +{ + struct bridge_controller *bc = BRIDGE_CONTROLLER(dev->bus); + int slot = PCI_SLOT(dev->devfn); + + /* Turn off byte swapping */ + bridge_clr(bc, b_device[slot].reg, BRIDGE_DEV_SWAP_DIR); + bridge_read(bc, b_widget.w_tflush); /* Flush */ +} + +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SGI, PCI_DEVICE_ID_SGI_IOC3, + bridge_disable_swapping); + + +/* + * The Bridge ASIC supports both type 0 and type 1 access. Type 1 is + * not really documented, so right now I can't write code which uses it. + * Therefore we use type 0 accesses for now even though they won't work + * correctly for PCI-to-PCI bridges. + * + * The function is complicated by the ultimate brokenness of the IOC3 chip + * which is used in SGI systems. The IOC3 can only handle 32-bit PCI + * accesses and does only decode parts of it's address space. + */ +static int pci_conf0_read_config(struct pci_bus *bus, unsigned int devfn, + int where, int size, u32 *value) +{ + struct bridge_controller *bc = BRIDGE_CONTROLLER(bus); + struct bridge_regs *bridge = bc->base; + int slot = PCI_SLOT(devfn); + int fn = PCI_FUNC(devfn); + void *addr; + u32 cf; + int res; + + addr = &bridge->b_type0_cfg_dev[slot].f[fn].c[PCI_VENDOR_ID]; + if (get_dbe(cf, (u32 *)addr)) + return PCIBIOS_DEVICE_NOT_FOUND; + + /* + * IOC3 is broken beyond belief ... Don't even give the + * generic PCI code a chance to look at it for real ... + */ + if (cf == (PCI_VENDOR_ID_SGI | (PCI_DEVICE_ID_SGI_IOC3 << 16))) { + addr = &bridge->b_type0_cfg_dev[slot].f[fn].l[where >> 2]; + return ioc3_cfg_rd(addr, where, size, value, + bc->ioc3_sid[slot]); + } + + addr = &bridge->b_type0_cfg_dev[slot].f[fn].c[where ^ (4 - size)]; + + if (size == 1) + res = get_dbe(*value, (u8 *)addr); + else if (size == 2) + res = get_dbe(*value, (u16 *)addr); + else + res = get_dbe(*value, (u32 *)addr); + + return res ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL; +} + +static int pci_conf1_read_config(struct pci_bus *bus, unsigned int devfn, + int where, int size, u32 *value) +{ + struct bridge_controller *bc = BRIDGE_CONTROLLER(bus); + struct bridge_regs *bridge = bc->base; + int busno = bus->number; + int slot = PCI_SLOT(devfn); + int fn = PCI_FUNC(devfn); + void *addr; + u32 cf; + int res; + + bridge_write(bc, b_pci_cfg, (busno << 16) | (slot << 11)); + addr = &bridge->b_type1_cfg.c[(fn << 8) | PCI_VENDOR_ID]; + if (get_dbe(cf, (u32 *)addr)) + return PCIBIOS_DEVICE_NOT_FOUND; + + /* + * IOC3 is broken beyond belief ... Don't even give the + * generic PCI code a chance to look at it for real ... + */ + if (cf == (PCI_VENDOR_ID_SGI | (PCI_DEVICE_ID_SGI_IOC3 << 16))) { + addr = &bridge->b_type1_cfg.c[(fn << 8) | (where & ~3)]; + return ioc3_cfg_rd(addr, where, size, value, + bc->ioc3_sid[slot]); + } + + addr = &bridge->b_type1_cfg.c[(fn << 8) | (where ^ (4 - size))]; + + if (size == 1) + res = get_dbe(*value, (u8 *)addr); + else if (size == 2) + res = get_dbe(*value, (u16 *)addr); + else + res = get_dbe(*value, (u32 *)addr); + + return res ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL; +} + +static int pci_read_config(struct pci_bus *bus, unsigned int devfn, + int where, int size, u32 *value) +{ + if (!pci_is_root_bus(bus)) + return pci_conf1_read_config(bus, devfn, where, size, value); + + return pci_conf0_read_config(bus, devfn, where, size, value); +} + +static int pci_conf0_write_config(struct pci_bus *bus, unsigned int devfn, + int where, int size, u32 value) +{ + struct bridge_controller *bc = BRIDGE_CONTROLLER(bus); + struct bridge_regs *bridge = bc->base; + int slot = PCI_SLOT(devfn); + int fn = PCI_FUNC(devfn); + void *addr; + u32 cf; + int res; + + addr = &bridge->b_type0_cfg_dev[slot].f[fn].c[PCI_VENDOR_ID]; + if (get_dbe(cf, (u32 *)addr)) + return PCIBIOS_DEVICE_NOT_FOUND; + + /* + * IOC3 is broken beyond belief ... Don't even give the + * generic PCI code a chance to look at it for real ... + */ + if (cf == (PCI_VENDOR_ID_SGI | (PCI_DEVICE_ID_SGI_IOC3 << 16))) { + addr = &bridge->b_type0_cfg_dev[slot].f[fn].l[where >> 2]; + return ioc3_cfg_wr(addr, where, size, value); + } + + addr = &bridge->b_type0_cfg_dev[slot].f[fn].c[where ^ (4 - size)]; + + if (size == 1) + res = put_dbe(value, (u8 *)addr); + else if (size == 2) + res = put_dbe(value, (u16 *)addr); + else + res = put_dbe(value, (u32 *)addr); + + if (res) + return PCIBIOS_DEVICE_NOT_FOUND; + + return PCIBIOS_SUCCESSFUL; +} + +static int pci_conf1_write_config(struct pci_bus *bus, unsigned int devfn, + int where, int size, u32 value) +{ + struct bridge_controller *bc = BRIDGE_CONTROLLER(bus); + struct bridge_regs *bridge = bc->base; + int slot = PCI_SLOT(devfn); + int fn = PCI_FUNC(devfn); + int busno = bus->number; + void *addr; + u32 cf; + int res; + + bridge_write(bc, b_pci_cfg, (busno << 16) | (slot << 11)); + addr = &bridge->b_type1_cfg.c[(fn << 8) | PCI_VENDOR_ID]; + if (get_dbe(cf, (u32 *)addr)) + return PCIBIOS_DEVICE_NOT_FOUND; + + /* + * IOC3 is broken beyond belief ... Don't even give the + * generic PCI code a chance to look at it for real ... + */ + if (cf == (PCI_VENDOR_ID_SGI | (PCI_DEVICE_ID_SGI_IOC3 << 16))) { + addr = &bridge->b_type0_cfg_dev[slot].f[fn].l[where >> 2]; + return ioc3_cfg_wr(addr, where, size, value); + } + + addr = &bridge->b_type1_cfg.c[(fn << 8) | (where ^ (4 - size))]; + + if (size == 1) + res = put_dbe(value, (u8 *)addr); + else if (size == 2) + res = put_dbe(value, (u16 *)addr); + else + res = put_dbe(value, (u32 *)addr); + + if (res) + return PCIBIOS_DEVICE_NOT_FOUND; + + return PCIBIOS_SUCCESSFUL; +} + +static int pci_write_config(struct pci_bus *bus, unsigned int devfn, + int where, int size, u32 value) +{ + if (!pci_is_root_bus(bus)) + return pci_conf1_write_config(bus, devfn, where, size, value); + + return pci_conf0_write_config(bus, devfn, where, size, value); +} + +static struct pci_ops bridge_pci_ops = { + .read = pci_read_config, + .write = pci_write_config, +}; + +struct bridge_irq_chip_data { + struct bridge_controller *bc; + nasid_t nasid; +}; + +static int bridge_set_affinity(struct irq_data *d, const struct cpumask *mask, + bool force) +{ +#ifdef CONFIG_NUMA + struct bridge_irq_chip_data *data = d->chip_data; + int bit = d->parent_data->hwirq; + int pin = d->hwirq; + int ret, cpu; + + ret = irq_chip_set_affinity_parent(d, mask, force); + if (ret >= 0) { + cpu = cpumask_first_and(mask, cpu_online_mask); + data->nasid = cpu_to_node(cpu); + bridge_write(data->bc, b_int_addr[pin].addr, + (((data->bc->intr_addr >> 30) & 0x30000) | + bit | (data->nasid << 8))); + bridge_read(data->bc, b_wid_tflush); + } + return ret; +#else + return irq_chip_set_affinity_parent(d, mask, force); +#endif +} + +struct irq_chip bridge_irq_chip = { + .name = "BRIDGE", + .irq_mask = irq_chip_mask_parent, + .irq_unmask = irq_chip_unmask_parent, + .irq_set_affinity = bridge_set_affinity +}; + +static int bridge_domain_alloc(struct irq_domain *domain, unsigned int virq, + unsigned int nr_irqs, void *arg) +{ + struct bridge_irq_chip_data *data; + struct irq_alloc_info *info = arg; + int ret; + + if (nr_irqs > 1 || !info) + return -EINVAL; + + data = kzalloc(sizeof(*data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + ret = irq_domain_alloc_irqs_parent(domain, virq, nr_irqs, arg); + if (ret >= 0) { + data->bc = info->ctrl; + data->nasid = info->nasid; + irq_domain_set_info(domain, virq, info->pin, &bridge_irq_chip, + data, handle_level_irq, NULL, NULL); + } else { + kfree(data); + } + + return ret; +} + +static void bridge_domain_free(struct irq_domain *domain, unsigned int virq, + unsigned int nr_irqs) +{ + struct irq_data *irqd = irq_domain_get_irq_data(domain, virq); + + if (nr_irqs) + return; + + kfree(irqd->chip_data); + irq_domain_free_irqs_top(domain, virq, nr_irqs); +} + +static int bridge_domain_activate(struct irq_domain *domain, + struct irq_data *irqd, bool reserve) +{ + struct bridge_irq_chip_data *data = irqd->chip_data; + struct bridge_controller *bc = data->bc; + int bit = irqd->parent_data->hwirq; + int pin = irqd->hwirq; + u32 device; + + bridge_write(bc, b_int_addr[pin].addr, + (((bc->intr_addr >> 30) & 0x30000) | + bit | (data->nasid << 8))); + bridge_set(bc, b_int_enable, (1 << pin)); + bridge_set(bc, b_int_enable, 0x7ffffe00); /* more stuff in int_enable */ + + /* + * Enable sending of an interrupt clear packet to the hub on a high to + * low transition of the interrupt pin. + * + * IRIX sets additional bits in the address which are documented as + * reserved in the bridge docs. + */ + bridge_set(bc, b_int_mode, (1UL << pin)); + + /* + * We assume the bridge to have a 1:1 mapping between devices + * (slots) and intr pins. + */ + device = bridge_read(bc, b_int_device); + device &= ~(7 << (pin*3)); + device |= (pin << (pin*3)); + bridge_write(bc, b_int_device, device); + + bridge_read(bc, b_wid_tflush); + return 0; +} + +static void bridge_domain_deactivate(struct irq_domain *domain, + struct irq_data *irqd) +{ + struct bridge_irq_chip_data *data = irqd->chip_data; + + bridge_clr(data->bc, b_int_enable, (1 << irqd->hwirq)); + bridge_read(data->bc, b_wid_tflush); +} + +static const struct irq_domain_ops bridge_domain_ops = { + .alloc = bridge_domain_alloc, + .free = bridge_domain_free, + .activate = bridge_domain_activate, + .deactivate = bridge_domain_deactivate +}; + +/* + * All observed requests have pin == 1. We could have a global here, that + * gets incremented and returned every time - unfortunately, pci_map_irq + * may be called on the same device over and over, and need to return the + * same value. On O2000, pin can be 0 or 1, and PCI slots can be [0..7]. + * + * A given PCI device, in general, should be able to intr any of the cpus + * on any one of the hubs connected to its xbow. + */ +static int bridge_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) +{ + struct bridge_controller *bc = BRIDGE_CONTROLLER(dev->bus); + struct irq_alloc_info info; + int irq; + + switch (pin) { + case PCI_INTERRUPT_UNKNOWN: + case PCI_INTERRUPT_INTA: + case PCI_INTERRUPT_INTC: + pin = 0; + break; + case PCI_INTERRUPT_INTB: + case PCI_INTERRUPT_INTD: + pin = 1; + } + + irq = bc->pci_int[slot][pin]; + if (irq == -1) { + info.ctrl = bc; + info.nasid = bc->nasid; + info.pin = bc->int_mapping[slot][pin]; + + irq = irq_domain_alloc_irqs(bc->domain, 1, bc->nasid, &info); + if (irq < 0) + return irq; + + bc->pci_int[slot][pin] = irq; + } + return irq; +} + +#define IOC3_SID(sid) (PCI_VENDOR_ID_SGI | ((sid) << 16)) + +static void bridge_setup_ip27_baseio6g(struct bridge_controller *bc) +{ + bc->ioc3_sid[2] = IOC3_SID(IOC3_SUBSYS_IP27_BASEIO6G); + bc->ioc3_sid[6] = IOC3_SID(IOC3_SUBSYS_IP27_MIO); + bc->int_mapping[2][1] = 4; + bc->int_mapping[6][1] = 6; +} + +static void bridge_setup_ip27_baseio(struct bridge_controller *bc) +{ + bc->ioc3_sid[2] = IOC3_SID(IOC3_SUBSYS_IP27_BASEIO); + bc->int_mapping[2][1] = 4; +} + +static void bridge_setup_ip29_baseio(struct bridge_controller *bc) +{ + bc->ioc3_sid[2] = IOC3_SID(IOC3_SUBSYS_IP29_SYSBOARD); + bc->int_mapping[2][1] = 3; +} + +static void bridge_setup_ip30_sysboard(struct bridge_controller *bc) +{ + bc->ioc3_sid[2] = IOC3_SID(IOC3_SUBSYS_IP30_SYSBOARD); + bc->int_mapping[2][1] = 4; +} + +static void bridge_setup_menet(struct bridge_controller *bc) +{ + bc->ioc3_sid[0] = IOC3_SID(IOC3_SUBSYS_MENET); + bc->ioc3_sid[1] = IOC3_SID(IOC3_SUBSYS_MENET); + bc->ioc3_sid[2] = IOC3_SID(IOC3_SUBSYS_MENET); + bc->ioc3_sid[3] = IOC3_SID(IOC3_SUBSYS_MENET4); +} + +static void bridge_setup_io7(struct bridge_controller *bc) +{ + bc->ioc3_sid[4] = IOC3_SID(IOC3_SUBSYS_IO7); +} + +static void bridge_setup_io8(struct bridge_controller *bc) +{ + bc->ioc3_sid[4] = IOC3_SID(IOC3_SUBSYS_IO8); +} + +static void bridge_setup_io9(struct bridge_controller *bc) +{ + bc->ioc3_sid[1] = IOC3_SID(IOC3_SUBSYS_IO9); +} + +static void bridge_setup_ip34_fuel_sysboard(struct bridge_controller *bc) +{ + bc->ioc3_sid[4] = IOC3_SID(IOC3_SUBSYS_IP34_SYSBOARD); +} + +#define BRIDGE_BOARD_SETUP(_partno, _setup) \ + { .match = _partno, .setup = _setup } + +static const struct { + char *match; + void (*setup)(struct bridge_controller *bc); +} bridge_ioc3_devid[] = { + BRIDGE_BOARD_SETUP("030-0734-", bridge_setup_ip27_baseio6g), + BRIDGE_BOARD_SETUP("030-0880-", bridge_setup_ip27_baseio6g), + BRIDGE_BOARD_SETUP("030-1023-", bridge_setup_ip27_baseio), + BRIDGE_BOARD_SETUP("030-1124-", bridge_setup_ip27_baseio), + BRIDGE_BOARD_SETUP("030-1025-", bridge_setup_ip29_baseio), + BRIDGE_BOARD_SETUP("030-1244-", bridge_setup_ip29_baseio), + BRIDGE_BOARD_SETUP("030-1389-", bridge_setup_ip29_baseio), + BRIDGE_BOARD_SETUP("030-0887-", bridge_setup_ip30_sysboard), + BRIDGE_BOARD_SETUP("030-1467-", bridge_setup_ip30_sysboard), + BRIDGE_BOARD_SETUP("030-0873-", bridge_setup_menet), + BRIDGE_BOARD_SETUP("030-1557-", bridge_setup_io7), + BRIDGE_BOARD_SETUP("030-1673-", bridge_setup_io8), + BRIDGE_BOARD_SETUP("030-1771-", bridge_setup_io9), + BRIDGE_BOARD_SETUP("030-1707-", bridge_setup_ip34_fuel_sysboard), +}; + +static void bridge_setup_board(struct bridge_controller *bc, char *partnum) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(bridge_ioc3_devid); i++) + if (!strncmp(partnum, bridge_ioc3_devid[i].match, + strlen(bridge_ioc3_devid[i].match))) { + bridge_ioc3_devid[i].setup(bc); + } +} + +static int bridge_nvmem_match(struct device *dev, const void *data) +{ + const char *name = dev_name(dev); + const char *prefix = data; + + if (strlen(name) < strlen(prefix)) + return 0; + + return memcmp(prefix, dev_name(dev), strlen(prefix)) == 0; +} + +static int bridge_get_partnum(u64 baddr, char *partnum) +{ + struct nvmem_device *nvmem; + char prefix[24]; + u8 prom[64]; + int i, j; + int ret; + + snprintf(prefix, sizeof(prefix), "bridge-%012llx-0b-", baddr); + + nvmem = nvmem_device_find(prefix, bridge_nvmem_match); + if (IS_ERR(nvmem)) + return PTR_ERR(nvmem); + + ret = nvmem_device_read(nvmem, 0, 64, prom); + nvmem_device_put(nvmem); + + if (ret != 64) + return ret; + + if (crc16(CRC16_INIT, prom, 32) != CRC16_VALID || + crc16(CRC16_INIT, prom + 32, 32) != CRC16_VALID) + return -EINVAL; + + /* Assemble part number */ + j = 0; + for (i = 0; i < 19; i++) + if (prom[i + 11] != ' ') + partnum[j++] = prom[i + 11]; + + for (i = 0; i < 6; i++) + if (prom[i + 32] != ' ') + partnum[j++] = prom[i + 32]; + + partnum[j] = 0; + + return 0; +} + +static int bridge_probe(struct platform_device *pdev) +{ + struct xtalk_bridge_platform_data *bd = dev_get_platdata(&pdev->dev); + struct device *dev = &pdev->dev; + struct bridge_controller *bc; + struct pci_host_bridge *host; + struct irq_domain *domain, *parent; + struct fwnode_handle *fn; + char partnum[26]; + int slot; + int err; + + /* get part number from one wire prom */ + if (bridge_get_partnum(virt_to_phys((void *)bd->bridge_addr), partnum)) + return -EPROBE_DEFER; /* not available yet */ + + parent = irq_get_default_host(); + if (!parent) + return -ENODEV; + fn = irq_domain_alloc_named_fwnode("BRIDGE"); + if (!fn) + return -ENOMEM; + domain = irq_domain_create_hierarchy(parent, 0, 8, fn, + &bridge_domain_ops, NULL); + if (!domain) { + irq_domain_free_fwnode(fn); + return -ENOMEM; + } + + pci_set_flags(PCI_PROBE_ONLY); + + host = devm_pci_alloc_host_bridge(dev, sizeof(*bc)); + if (!host) { + err = -ENOMEM; + goto err_remove_domain; + } + + bc = pci_host_bridge_priv(host); + + bc->busn.name = "Bridge PCI busn"; + bc->busn.start = 0; + bc->busn.end = 0xff; + bc->busn.flags = IORESOURCE_BUS; + + bc->domain = domain; + + pci_add_resource_offset(&host->windows, &bd->mem, bd->mem_offset); + pci_add_resource_offset(&host->windows, &bd->io, bd->io_offset); + pci_add_resource(&host->windows, &bc->busn); + + err = devm_request_pci_bus_resources(dev, &host->windows); + if (err < 0) + goto err_free_resource; + + bc->nasid = bd->nasid; + + bc->baddr = (u64)bd->masterwid << 60 | PCI64_ATTR_BAR; + bc->base = (struct bridge_regs *)bd->bridge_addr; + bc->intr_addr = bd->intr_addr; + + /* + * Clear all pending interrupts. + */ + bridge_write(bc, b_int_rst_stat, BRIDGE_IRR_ALL_CLR); + + /* + * Until otherwise set up, assume all interrupts are from slot 0 + */ + bridge_write(bc, b_int_device, 0x0); + + /* + * disable swapping for big windows + */ + bridge_clr(bc, b_wid_control, + BRIDGE_CTRL_IO_SWAP | BRIDGE_CTRL_MEM_SWAP); +#ifdef CONFIG_PAGE_SIZE_4KB + bridge_clr(bc, b_wid_control, BRIDGE_CTRL_PAGE_SIZE); +#else /* 16kB or larger */ + bridge_set(bc, b_wid_control, BRIDGE_CTRL_PAGE_SIZE); +#endif + + /* + * Hmm... IRIX sets additional bits in the address which + * are documented as reserved in the bridge docs. + */ + bridge_write(bc, b_wid_int_upper, + ((bc->intr_addr >> 32) & 0xffff) | (bd->masterwid << 16)); + bridge_write(bc, b_wid_int_lower, bc->intr_addr & 0xffffffff); + bridge_write(bc, b_dir_map, (bd->masterwid << 20)); /* DMA */ + bridge_write(bc, b_int_enable, 0); + + for (slot = 0; slot < 8; slot++) { + bridge_set(bc, b_device[slot].reg, BRIDGE_DEV_SWAP_DIR); + bc->pci_int[slot][0] = -1; + bc->pci_int[slot][1] = -1; + /* default interrupt pin mapping */ + bc->int_mapping[slot][0] = slot; + bc->int_mapping[slot][1] = slot ^ 4; + } + bridge_read(bc, b_wid_tflush); /* wait until Bridge PIO complete */ + + bridge_setup_board(bc, partnum); + + host->dev.parent = dev; + host->sysdata = bc; + host->busnr = 0; + host->ops = &bridge_pci_ops; + host->map_irq = bridge_map_irq; + host->swizzle_irq = pci_common_swizzle; + + err = pci_scan_root_bus_bridge(host); + if (err < 0) + goto err_free_resource; + + pci_bus_claim_resources(host->bus); + pci_bus_add_devices(host->bus); + + platform_set_drvdata(pdev, host->bus); + + return 0; + +err_free_resource: + pci_free_resource_list(&host->windows); +err_remove_domain: + irq_domain_remove(domain); + irq_domain_free_fwnode(fn); + return err; +} + +static int bridge_remove(struct platform_device *pdev) +{ + struct pci_bus *bus = platform_get_drvdata(pdev); + struct bridge_controller *bc = BRIDGE_CONTROLLER(bus); + struct fwnode_handle *fn = bc->domain->fwnode; + + irq_domain_remove(bc->domain); + irq_domain_free_fwnode(fn); + pci_lock_rescan_remove(); + pci_stop_root_bus(bus); + pci_remove_root_bus(bus); + pci_unlock_rescan_remove(); + + return 0; +} + +static struct platform_driver bridge_driver = { + .probe = bridge_probe, + .remove = bridge_remove, + .driver = { + .name = "xtalk-bridge", + } +}; + +builtin_platform_driver(bridge_driver); |