summaryrefslogtreecommitdiffstats
path: root/arch/powerpc/kernel/cpu_setup_6xx.S
diff options
context:
space:
mode:
Diffstat (limited to 'arch/powerpc/kernel/cpu_setup_6xx.S')
-rw-r--r--arch/powerpc/kernel/cpu_setup_6xx.S488
1 files changed, 488 insertions, 0 deletions
diff --git a/arch/powerpc/kernel/cpu_setup_6xx.S b/arch/powerpc/kernel/cpu_setup_6xx.S
new file mode 100644
index 000000000..f8b5ff64b
--- /dev/null
+++ b/arch/powerpc/kernel/cpu_setup_6xx.S
@@ -0,0 +1,488 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * This file contains low level CPU setup functions.
+ * Copyright (C) 2003 Benjamin Herrenschmidt (benh@kernel.crashing.org)
+ */
+
+#include <asm/processor.h>
+#include <asm/page.h>
+#include <asm/cputable.h>
+#include <asm/ppc_asm.h>
+#include <asm/asm-offsets.h>
+#include <asm/cache.h>
+#include <asm/mmu.h>
+#include <asm/feature-fixups.h>
+
+_GLOBAL(__setup_cpu_603)
+ mflr r5
+BEGIN_MMU_FTR_SECTION
+ li r10,0
+ mtspr SPRN_SPRG_603_LRU,r10 /* init SW LRU tracking */
+END_MMU_FTR_SECTION_IFSET(MMU_FTR_NEED_DTLB_SW_LRU)
+
+BEGIN_FTR_SECTION
+ bl __init_fpu_registers
+END_FTR_SECTION_IFCLR(CPU_FTR_FPU_UNAVAILABLE)
+ bl setup_common_caches
+ mtlr r5
+ blr
+_GLOBAL(__setup_cpu_604)
+ mflr r5
+ bl setup_common_caches
+ bl setup_604_hid0
+ mtlr r5
+ blr
+_GLOBAL(__setup_cpu_750)
+ mflr r5
+ bl __init_fpu_registers
+ bl setup_common_caches
+ bl setup_750_7400_hid0
+ mtlr r5
+ blr
+_GLOBAL(__setup_cpu_750cx)
+ mflr r5
+ bl __init_fpu_registers
+ bl setup_common_caches
+ bl setup_750_7400_hid0
+ bl setup_750cx
+ mtlr r5
+ blr
+_GLOBAL(__setup_cpu_750fx)
+ mflr r5
+ bl __init_fpu_registers
+ bl setup_common_caches
+ bl setup_750_7400_hid0
+ bl setup_750fx
+ mtlr r5
+ blr
+_GLOBAL(__setup_cpu_7400)
+ mflr r5
+ bl __init_fpu_registers
+ bl setup_7400_workarounds
+ bl setup_common_caches
+ bl setup_750_7400_hid0
+ mtlr r5
+ blr
+_GLOBAL(__setup_cpu_7410)
+ mflr r5
+ bl __init_fpu_registers
+ bl setup_7410_workarounds
+ bl setup_common_caches
+ bl setup_750_7400_hid0
+ li r3,0
+ mtspr SPRN_L2CR2,r3
+ mtlr r5
+ blr
+_GLOBAL(__setup_cpu_745x)
+ mflr r5
+ bl setup_common_caches
+ bl setup_745x_specifics
+ mtlr r5
+ blr
+
+/* Enable caches for 603's, 604, 750 & 7400 */
+setup_common_caches:
+ mfspr r11,SPRN_HID0
+ andi. r0,r11,HID0_DCE
+ ori r11,r11,HID0_ICE|HID0_DCE
+ ori r8,r11,HID0_ICFI
+ bne 1f /* don't invalidate the D-cache */
+ ori r8,r8,HID0_DCI /* unless it wasn't enabled */
+1: sync
+ mtspr SPRN_HID0,r8 /* enable and invalidate caches */
+ sync
+ mtspr SPRN_HID0,r11 /* enable caches */
+ sync
+ isync
+ blr
+
+/* 604, 604e, 604ev, ...
+ * Enable superscalar execution & branch history table
+ */
+setup_604_hid0:
+ mfspr r11,SPRN_HID0
+ ori r11,r11,HID0_SIED|HID0_BHTE
+ ori r8,r11,HID0_BTCD
+ sync
+ mtspr SPRN_HID0,r8 /* flush branch target address cache */
+ sync /* on 604e/604r */
+ mtspr SPRN_HID0,r11
+ sync
+ isync
+ blr
+
+/* 7400 <= rev 2.7 and 7410 rev = 1.0 suffer from some
+ * erratas we work around here.
+ * Moto MPC710CE.pdf describes them, those are errata
+ * #3, #4 and #5
+ * Note that we assume the firmware didn't choose to
+ * apply other workarounds (there are other ones documented
+ * in the .pdf). It appear that Apple firmware only works
+ * around #3 and with the same fix we use. We may want to
+ * check if the CPU is using 60x bus mode in which case
+ * the workaround for errata #4 is useless. Also, we may
+ * want to explicitly clear HID0_NOPDST as this is not
+ * needed once we have applied workaround #5 (though it's
+ * not set by Apple's firmware at least).
+ */
+setup_7400_workarounds:
+ mfpvr r3
+ rlwinm r3,r3,0,20,31
+ cmpwi 0,r3,0x0207
+ ble 1f
+ blr
+setup_7410_workarounds:
+ mfpvr r3
+ rlwinm r3,r3,0,20,31
+ cmpwi 0,r3,0x0100
+ bnelr
+1:
+ mfspr r11,SPRN_MSSSR0
+ /* Errata #3: Set L1OPQ_SIZE to 0x10 */
+ rlwinm r11,r11,0,9,6
+ oris r11,r11,0x0100
+ /* Errata #4: Set L2MQ_SIZE to 1 (check for MPX mode first ?) */
+ oris r11,r11,0x0002
+ /* Errata #5: Set DRLT_SIZE to 0x01 */
+ rlwinm r11,r11,0,5,2
+ oris r11,r11,0x0800
+ sync
+ mtspr SPRN_MSSSR0,r11
+ sync
+ isync
+ blr
+
+/* 740/750/7400/7410
+ * Enable Store Gathering (SGE), Address Broadcast (ABE),
+ * Branch History Table (BHTE), Branch Target ICache (BTIC)
+ * Dynamic Power Management (DPM), Speculative (SPD)
+ * Clear Instruction cache throttling (ICTC)
+ */
+setup_750_7400_hid0:
+ mfspr r11,SPRN_HID0
+ ori r11,r11,HID0_SGE | HID0_ABE | HID0_BHTE | HID0_BTIC
+ oris r11,r11,HID0_DPM@h
+BEGIN_FTR_SECTION
+ xori r11,r11,HID0_BTIC
+END_FTR_SECTION_IFSET(CPU_FTR_NO_BTIC)
+BEGIN_FTR_SECTION
+ xoris r11,r11,HID0_DPM@h /* disable dynamic power mgmt */
+END_FTR_SECTION_IFSET(CPU_FTR_NO_DPM)
+ li r3,HID0_SPD
+ andc r11,r11,r3 /* clear SPD: enable speculative */
+ li r3,0
+ mtspr SPRN_ICTC,r3 /* Instruction Cache Throttling off */
+ isync
+ mtspr SPRN_HID0,r11
+ sync
+ isync
+ blr
+
+/* 750cx specific
+ * Looks like we have to disable NAP feature for some PLL settings...
+ * (waiting for confirmation)
+ */
+setup_750cx:
+ mfspr r10, SPRN_HID1
+ rlwinm r10,r10,4,28,31
+ cmpwi cr0,r10,7
+ cmpwi cr1,r10,9
+ cmpwi cr2,r10,11
+ cror 4*cr0+eq,4*cr0+eq,4*cr1+eq
+ cror 4*cr0+eq,4*cr0+eq,4*cr2+eq
+ bnelr
+ lwz r6,CPU_SPEC_FEATURES(r4)
+ li r7,CPU_FTR_CAN_NAP
+ andc r6,r6,r7
+ stw r6,CPU_SPEC_FEATURES(r4)
+ blr
+
+/* 750fx specific
+ */
+setup_750fx:
+ blr
+
+/* MPC 745x
+ * Enable Store Gathering (SGE), Branch Folding (FOLD)
+ * Branch History Table (BHTE), Branch Target ICache (BTIC)
+ * Dynamic Power Management (DPM), Speculative (SPD)
+ * Ensure our data cache instructions really operate.
+ * Timebase has to be running or we wouldn't have made it here,
+ * just ensure we don't disable it.
+ * Clear Instruction cache throttling (ICTC)
+ * Enable L2 HW prefetch
+ */
+setup_745x_specifics:
+ /* We check for the presence of an L3 cache setup by
+ * the firmware. If any, we disable NAP capability as
+ * it's known to be bogus on rev 2.1 and earlier
+ */
+BEGIN_FTR_SECTION
+ mfspr r11,SPRN_L3CR
+ andis. r11,r11,L3CR_L3E@h
+ beq 1f
+END_FTR_SECTION_IFSET(CPU_FTR_L3CR)
+ lwz r6,CPU_SPEC_FEATURES(r4)
+ andis. r0,r6,CPU_FTR_L3_DISABLE_NAP@h
+ beq 1f
+ li r7,CPU_FTR_CAN_NAP
+ andc r6,r6,r7
+ stw r6,CPU_SPEC_FEATURES(r4)
+1:
+ mfspr r11,SPRN_HID0
+
+ /* All of the bits we have to set.....
+ */
+ ori r11,r11,HID0_SGE | HID0_FOLD | HID0_BHTE
+ ori r11,r11,HID0_LRSTK | HID0_BTIC
+ oris r11,r11,HID0_DPM@h
+BEGIN_MMU_FTR_SECTION
+ oris r11,r11,HID0_HIGH_BAT@h
+END_MMU_FTR_SECTION_IFSET(MMU_FTR_USE_HIGH_BATS)
+BEGIN_FTR_SECTION
+ xori r11,r11,HID0_BTIC
+END_FTR_SECTION_IFSET(CPU_FTR_NO_BTIC)
+BEGIN_FTR_SECTION
+ xoris r11,r11,HID0_DPM@h /* disable dynamic power mgmt */
+END_FTR_SECTION_IFSET(CPU_FTR_NO_DPM)
+
+ /* All of the bits we have to clear....
+ */
+ li r3,HID0_SPD | HID0_NOPDST | HID0_NOPTI
+ andc r11,r11,r3 /* clear SPD: enable speculative */
+ li r3,0
+
+ mtspr SPRN_ICTC,r3 /* Instruction Cache Throttling off */
+ isync
+ mtspr SPRN_HID0,r11
+ sync
+ isync
+
+ /* Enable L2 HW prefetch, if L2 is enabled
+ */
+ mfspr r3,SPRN_L2CR
+ andis. r3,r3,L2CR_L2E@h
+ beqlr
+ mfspr r3,SPRN_MSSCR0
+ ori r3,r3,3
+ sync
+ mtspr SPRN_MSSCR0,r3
+ sync
+ isync
+ blr
+
+/*
+ * Initialize the FPU registers. This is needed to work around an errata
+ * in some 750 cpus where using a not yet initialized FPU register after
+ * power on reset may hang the CPU
+ */
+_GLOBAL(__init_fpu_registers)
+ mfmsr r10
+ ori r11,r10,MSR_FP
+ mtmsr r11
+ isync
+ addis r9,r3,empty_zero_page@ha
+ addi r9,r9,empty_zero_page@l
+ REST_32FPRS(0,r9)
+ sync
+ mtmsr r10
+ isync
+ blr
+_ASM_NOKPROBE_SYMBOL(__init_fpu_registers)
+
+
+/* Definitions for the table use to save CPU states */
+#define CS_HID0 0
+#define CS_HID1 4
+#define CS_HID2 8
+#define CS_MSSCR0 12
+#define CS_MSSSR0 16
+#define CS_ICTRL 20
+#define CS_LDSTCR 24
+#define CS_LDSTDB 28
+#define CS_SIZE 32
+
+ .data
+ .balign L1_CACHE_BYTES
+cpu_state_storage:
+ .space CS_SIZE
+ .balign L1_CACHE_BYTES,0
+ .text
+
+/* Called in normal context to backup CPU 0 state. This
+ * does not include cache settings. This function is also
+ * called for machine sleep. This does not include the MMU
+ * setup, BATs, etc... but rather the "special" registers
+ * like HID0, HID1, MSSCR0, etc...
+ */
+_GLOBAL(__save_cpu_setup)
+ /* Some CR fields are volatile, we back it up all */
+ mfcr r7
+
+ /* Get storage ptr */
+ lis r5,cpu_state_storage@h
+ ori r5,r5,cpu_state_storage@l
+
+ /* Save HID0 (common to all CONFIG_PPC_BOOK3S_32 cpus) */
+ mfspr r3,SPRN_HID0
+ stw r3,CS_HID0(r5)
+
+ /* Now deal with CPU type dependent registers */
+ mfspr r3,SPRN_PVR
+ srwi r3,r3,16
+ cmplwi cr0,r3,0x8000 /* 7450 */
+ cmplwi cr1,r3,0x000c /* 7400 */
+ cmplwi cr2,r3,0x800c /* 7410 */
+ cmplwi cr3,r3,0x8001 /* 7455 */
+ cmplwi cr4,r3,0x8002 /* 7457 */
+ cmplwi cr5,r3,0x8003 /* 7447A */
+ cmplwi cr6,r3,0x7000 /* 750FX */
+ cmplwi cr7,r3,0x8004 /* 7448 */
+ /* cr1 is 7400 || 7410 */
+ cror 4*cr1+eq,4*cr1+eq,4*cr2+eq
+ /* cr0 is 74xx */
+ cror 4*cr0+eq,4*cr0+eq,4*cr3+eq
+ cror 4*cr0+eq,4*cr0+eq,4*cr4+eq
+ cror 4*cr0+eq,4*cr0+eq,4*cr1+eq
+ cror 4*cr0+eq,4*cr0+eq,4*cr5+eq
+ cror 4*cr0+eq,4*cr0+eq,4*cr7+eq
+ bne 1f
+ /* Backup 74xx specific regs */
+ mfspr r4,SPRN_MSSCR0
+ stw r4,CS_MSSCR0(r5)
+ mfspr r4,SPRN_MSSSR0
+ stw r4,CS_MSSSR0(r5)
+ beq cr1,1f
+ /* Backup 745x specific registers */
+ mfspr r4,SPRN_HID1
+ stw r4,CS_HID1(r5)
+ mfspr r4,SPRN_ICTRL
+ stw r4,CS_ICTRL(r5)
+ mfspr r4,SPRN_LDSTCR
+ stw r4,CS_LDSTCR(r5)
+ mfspr r4,SPRN_LDSTDB
+ stw r4,CS_LDSTDB(r5)
+1:
+ bne cr6,1f
+ /* Backup 750FX specific registers */
+ mfspr r4,SPRN_HID1
+ stw r4,CS_HID1(r5)
+ /* If rev 2.x, backup HID2 */
+ mfspr r3,SPRN_PVR
+ andi. r3,r3,0xff00
+ cmpwi cr0,r3,0x0200
+ bne 1f
+ mfspr r4,SPRN_HID2
+ stw r4,CS_HID2(r5)
+1:
+ mtcr r7
+ blr
+
+/* Called with no MMU context (typically MSR:IR/DR off) to
+ * restore CPU state as backed up by the previous
+ * function. This does not include cache setting
+ */
+_GLOBAL(__restore_cpu_setup)
+ /* Some CR fields are volatile, we back it up all */
+ mfcr r7
+
+ /* Get storage ptr */
+ lis r5,(cpu_state_storage-KERNELBASE)@h
+ ori r5,r5,cpu_state_storage@l
+
+ /* Restore HID0 */
+ lwz r3,CS_HID0(r5)
+ sync
+ isync
+ mtspr SPRN_HID0,r3
+ sync
+ isync
+
+ /* Now deal with CPU type dependent registers */
+ mfspr r3,SPRN_PVR
+ srwi r3,r3,16
+ cmplwi cr0,r3,0x8000 /* 7450 */
+ cmplwi cr1,r3,0x000c /* 7400 */
+ cmplwi cr2,r3,0x800c /* 7410 */
+ cmplwi cr3,r3,0x8001 /* 7455 */
+ cmplwi cr4,r3,0x8002 /* 7457 */
+ cmplwi cr5,r3,0x8003 /* 7447A */
+ cmplwi cr6,r3,0x7000 /* 750FX */
+ cmplwi cr7,r3,0x8004 /* 7448 */
+ /* cr1 is 7400 || 7410 */
+ cror 4*cr1+eq,4*cr1+eq,4*cr2+eq
+ /* cr0 is 74xx */
+ cror 4*cr0+eq,4*cr0+eq,4*cr3+eq
+ cror 4*cr0+eq,4*cr0+eq,4*cr4+eq
+ cror 4*cr0+eq,4*cr0+eq,4*cr1+eq
+ cror 4*cr0+eq,4*cr0+eq,4*cr5+eq
+ cror 4*cr0+eq,4*cr0+eq,4*cr7+eq
+ bne 2f
+ /* Restore 74xx specific regs */
+ lwz r4,CS_MSSCR0(r5)
+ sync
+ mtspr SPRN_MSSCR0,r4
+ sync
+ isync
+ lwz r4,CS_MSSSR0(r5)
+ sync
+ mtspr SPRN_MSSSR0,r4
+ sync
+ isync
+ bne cr2,1f
+ /* Clear 7410 L2CR2 */
+ li r4,0
+ mtspr SPRN_L2CR2,r4
+1: beq cr1,2f
+ /* Restore 745x specific registers */
+ lwz r4,CS_HID1(r5)
+ sync
+ mtspr SPRN_HID1,r4
+ isync
+ sync
+ lwz r4,CS_ICTRL(r5)
+ sync
+ mtspr SPRN_ICTRL,r4
+ isync
+ sync
+ lwz r4,CS_LDSTCR(r5)
+ sync
+ mtspr SPRN_LDSTCR,r4
+ isync
+ sync
+ lwz r4,CS_LDSTDB(r5)
+ sync
+ mtspr SPRN_LDSTDB,r4
+ isync
+ sync
+2: bne cr6,1f
+ /* Restore 750FX specific registers
+ * that is restore HID2 on rev 2.x and PLL config & switch
+ * to PLL 0 on all
+ */
+ /* If rev 2.x, restore HID2 with low voltage bit cleared */
+ mfspr r3,SPRN_PVR
+ andi. r3,r3,0xff00
+ cmpwi cr0,r3,0x0200
+ bne 4f
+ lwz r4,CS_HID2(r5)
+ rlwinm r4,r4,0,19,17
+ mtspr SPRN_HID2,r4
+ sync
+4:
+ lwz r4,CS_HID1(r5)
+ rlwinm r5,r4,0,16,14
+ mtspr SPRN_HID1,r5
+ /* Wait for PLL to stabilize */
+ mftbl r5
+3: mftbl r6
+ sub r6,r6,r5
+ cmplwi cr0,r6,10000
+ ble 3b
+ /* Setup final PLL */
+ mtspr SPRN_HID1,r4
+1:
+ mtcr r7
+ blr
+_ASM_NOKPROBE_SYMBOL(__restore_cpu_setup)
+