summaryrefslogtreecommitdiffstats
path: root/arch/powerpc/kernel/exceptions-64s.S
diff options
context:
space:
mode:
Diffstat (limited to 'arch/powerpc/kernel/exceptions-64s.S')
-rw-r--r--arch/powerpc/kernel/exceptions-64s.S3139
1 files changed, 3139 insertions, 0 deletions
diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S
new file mode 100644
index 000000000..651c36b05
--- /dev/null
+++ b/arch/powerpc/kernel/exceptions-64s.S
@@ -0,0 +1,3139 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * This file contains the 64-bit "server" PowerPC variant
+ * of the low level exception handling including exception
+ * vectors, exception return, part of the slb and stab
+ * handling and other fixed offset specific things.
+ *
+ * This file is meant to be #included from head_64.S due to
+ * position dependent assembly.
+ *
+ * Most of this originates from head_64.S and thus has the same
+ * copyright history.
+ *
+ */
+
+#include <asm/hw_irq.h>
+#include <asm/exception-64s.h>
+#include <asm/ptrace.h>
+#include <asm/cpuidle.h>
+#include <asm/head-64.h>
+#include <asm/feature-fixups.h>
+#include <asm/kup.h>
+
+/*
+ * Following are fixed section helper macros.
+ *
+ * EXC_REAL_BEGIN/END - real, unrelocated exception vectors
+ * EXC_VIRT_BEGIN/END - virt (AIL), unrelocated exception vectors
+ * TRAMP_REAL_BEGIN - real, unrelocated helpers (virt may call these)
+ * TRAMP_VIRT_BEGIN - virt, unreloc helpers (in practice, real can use)
+ * EXC_COMMON - After switching to virtual, relocated mode.
+ */
+
+#define EXC_REAL_BEGIN(name, start, size) \
+ FIXED_SECTION_ENTRY_BEGIN_LOCATION(real_vectors, exc_real_##start##_##name, start, size)
+
+#define EXC_REAL_END(name, start, size) \
+ FIXED_SECTION_ENTRY_END_LOCATION(real_vectors, exc_real_##start##_##name, start, size)
+
+#define EXC_VIRT_BEGIN(name, start, size) \
+ FIXED_SECTION_ENTRY_BEGIN_LOCATION(virt_vectors, exc_virt_##start##_##name, start, size)
+
+#define EXC_VIRT_END(name, start, size) \
+ FIXED_SECTION_ENTRY_END_LOCATION(virt_vectors, exc_virt_##start##_##name, start, size)
+
+#define EXC_COMMON_BEGIN(name) \
+ USE_TEXT_SECTION(); \
+ .balign IFETCH_ALIGN_BYTES; \
+ .global name; \
+ _ASM_NOKPROBE_SYMBOL(name); \
+ DEFINE_FIXED_SYMBOL(name, text); \
+name:
+
+#define TRAMP_REAL_BEGIN(name) \
+ FIXED_SECTION_ENTRY_BEGIN(real_trampolines, name)
+
+#define TRAMP_VIRT_BEGIN(name) \
+ FIXED_SECTION_ENTRY_BEGIN(virt_trampolines, name)
+
+#define EXC_REAL_NONE(start, size) \
+ FIXED_SECTION_ENTRY_BEGIN_LOCATION(real_vectors, exc_real_##start##_##unused, start, size); \
+ FIXED_SECTION_ENTRY_END_LOCATION(real_vectors, exc_real_##start##_##unused, start, size)
+
+#define EXC_VIRT_NONE(start, size) \
+ FIXED_SECTION_ENTRY_BEGIN_LOCATION(virt_vectors, exc_virt_##start##_##unused, start, size); \
+ FIXED_SECTION_ENTRY_END_LOCATION(virt_vectors, exc_virt_##start##_##unused, start, size)
+
+/*
+ * We're short on space and time in the exception prolog, so we can't
+ * use the normal LOAD_REG_IMMEDIATE macro to load the address of label.
+ * Instead we get the base of the kernel from paca->kernelbase and or in the low
+ * part of label. This requires that the label be within 64KB of kernelbase, and
+ * that kernelbase be 64K aligned.
+ */
+#define LOAD_HANDLER(reg, label) \
+ ld reg,PACAKBASE(r13); /* get high part of &label */ \
+ ori reg,reg,FIXED_SYMBOL_ABS_ADDR(label)
+
+#define __LOAD_HANDLER(reg, label, section) \
+ ld reg,PACAKBASE(r13); \
+ ori reg,reg,(ABS_ADDR(label, section))@l
+
+/*
+ * Branches from unrelocated code (e.g., interrupts) to labels outside
+ * head-y require >64K offsets.
+ */
+#define __LOAD_FAR_HANDLER(reg, label, section) \
+ ld reg,PACAKBASE(r13); \
+ ori reg,reg,(ABS_ADDR(label, section))@l; \
+ addis reg,reg,(ABS_ADDR(label, section))@h
+
+/*
+ * Interrupt code generation macros
+ */
+#define IVEC .L_IVEC_\name\() /* Interrupt vector address */
+#define IHSRR .L_IHSRR_\name\() /* Sets SRR or HSRR registers */
+#define IHSRR_IF_HVMODE .L_IHSRR_IF_HVMODE_\name\() /* HSRR if HV else SRR */
+#define IAREA .L_IAREA_\name\() /* PACA save area */
+#define IVIRT .L_IVIRT_\name\() /* Has virt mode entry point */
+#define IISIDE .L_IISIDE_\name\() /* Uses SRR0/1 not DAR/DSISR */
+#define ICFAR .L_ICFAR_\name\() /* Uses CFAR */
+#define ICFAR_IF_HVMODE .L_ICFAR_IF_HVMODE_\name\() /* Uses CFAR if HV */
+#define IDAR .L_IDAR_\name\() /* Uses DAR (or SRR0) */
+#define IDSISR .L_IDSISR_\name\() /* Uses DSISR (or SRR1) */
+#define IBRANCH_TO_COMMON .L_IBRANCH_TO_COMMON_\name\() /* ENTRY branch to common */
+#define IREALMODE_COMMON .L_IREALMODE_COMMON_\name\() /* Common runs in realmode */
+#define IMASK .L_IMASK_\name\() /* IRQ soft-mask bit */
+#define IKVM_REAL .L_IKVM_REAL_\name\() /* Real entry tests KVM */
+#define __IKVM_REAL(name) .L_IKVM_REAL_ ## name
+#define IKVM_VIRT .L_IKVM_VIRT_\name\() /* Virt entry tests KVM */
+#define ISTACK .L_ISTACK_\name\() /* Set regular kernel stack */
+#define __ISTACK(name) .L_ISTACK_ ## name
+#define IKUAP .L_IKUAP_\name\() /* Do KUAP lock */
+
+#define INT_DEFINE_BEGIN(n) \
+.macro int_define_ ## n name
+
+#define INT_DEFINE_END(n) \
+.endm ; \
+int_define_ ## n n ; \
+do_define_int n
+
+.macro do_define_int name
+ .ifndef IVEC
+ .error "IVEC not defined"
+ .endif
+ .ifndef IHSRR
+ IHSRR=0
+ .endif
+ .ifndef IHSRR_IF_HVMODE
+ IHSRR_IF_HVMODE=0
+ .endif
+ .ifndef IAREA
+ IAREA=PACA_EXGEN
+ .endif
+ .ifndef IVIRT
+ IVIRT=1
+ .endif
+ .ifndef IISIDE
+ IISIDE=0
+ .endif
+ .ifndef ICFAR
+ ICFAR=1
+ .endif
+ .ifndef ICFAR_IF_HVMODE
+ ICFAR_IF_HVMODE=0
+ .endif
+ .ifndef IDAR
+ IDAR=0
+ .endif
+ .ifndef IDSISR
+ IDSISR=0
+ .endif
+ .ifndef IBRANCH_TO_COMMON
+ IBRANCH_TO_COMMON=1
+ .endif
+ .ifndef IREALMODE_COMMON
+ IREALMODE_COMMON=0
+ .else
+ .if ! IBRANCH_TO_COMMON
+ .error "IREALMODE_COMMON=1 but IBRANCH_TO_COMMON=0"
+ .endif
+ .endif
+ .ifndef IMASK
+ IMASK=0
+ .endif
+ .ifndef IKVM_REAL
+ IKVM_REAL=0
+ .endif
+ .ifndef IKVM_VIRT
+ IKVM_VIRT=0
+ .endif
+ .ifndef ISTACK
+ ISTACK=1
+ .endif
+ .ifndef IKUAP
+ IKUAP=1
+ .endif
+.endm
+
+/*
+ * All interrupts which set HSRR registers, as well as SRESET and MCE and
+ * syscall when invoked with "sc 1" switch to MSR[HV]=1 (HVMODE) to be taken,
+ * so they all generally need to test whether they were taken in guest context.
+ *
+ * Note: SRESET and MCE may also be sent to the guest by the hypervisor, and be
+ * taken with MSR[HV]=0.
+ *
+ * Interrupts which set SRR registers (with the above exceptions) do not
+ * elevate to MSR[HV]=1 mode, though most can be taken when running with
+ * MSR[HV]=1 (e.g., bare metal kernel and userspace). So these interrupts do
+ * not need to test whether a guest is running because they get delivered to
+ * the guest directly, including nested HV KVM guests.
+ *
+ * The exception is PR KVM, where the guest runs with MSR[PR]=1 and the host
+ * runs with MSR[HV]=0, so the host takes all interrupts on behalf of the
+ * guest. PR KVM runs with LPCR[AIL]=0 which causes interrupts to always be
+ * delivered to the real-mode entry point, therefore such interrupts only test
+ * KVM in their real mode handlers, and only when PR KVM is possible.
+ *
+ * Interrupts that are taken in MSR[HV]=0 and escalate to MSR[HV]=1 are always
+ * delivered in real-mode when the MMU is in hash mode because the MMU
+ * registers are not set appropriately to translate host addresses. In nested
+ * radix mode these can be delivered in virt-mode as the host translations are
+ * used implicitly (see: effective LPID, effective PID).
+ */
+
+/*
+ * If an interrupt is taken while a guest is running, it is immediately routed
+ * to KVM to handle.
+ */
+
+.macro KVMTEST name handler
+#ifdef CONFIG_KVM_BOOK3S_64_HANDLER
+ lbz r10,HSTATE_IN_GUEST(r13)
+ cmpwi r10,0
+ /* HSRR variants have the 0x2 bit added to their trap number */
+ .if IHSRR_IF_HVMODE
+ BEGIN_FTR_SECTION
+ li r10,(IVEC + 0x2)
+ FTR_SECTION_ELSE
+ li r10,(IVEC)
+ ALT_FTR_SECTION_END_IFSET(CPU_FTR_HVMODE | CPU_FTR_ARCH_206)
+ .elseif IHSRR
+ li r10,(IVEC + 0x2)
+ .else
+ li r10,(IVEC)
+ .endif
+ bne \handler
+#endif
+.endm
+
+/*
+ * This is the BOOK3S interrupt entry code macro.
+ *
+ * This can result in one of several things happening:
+ * - Branch to the _common handler, relocated, in virtual mode.
+ * These are normal interrupts (synchronous and asynchronous) handled by
+ * the kernel.
+ * - Branch to KVM, relocated but real mode interrupts remain in real mode.
+ * These occur when HSTATE_IN_GUEST is set. The interrupt may be caused by
+ * / intended for host or guest kernel, but KVM must always be involved
+ * because the machine state is set for guest execution.
+ * - Branch to the masked handler, unrelocated.
+ * These occur when maskable asynchronous interrupts are taken with the
+ * irq_soft_mask set.
+ * - Branch to an "early" handler in real mode but relocated.
+ * This is done if early=1. MCE and HMI use these to handle errors in real
+ * mode.
+ * - Fall through and continue executing in real, unrelocated mode.
+ * This is done if early=2.
+ */
+
+.macro GEN_BRANCH_TO_COMMON name, virt
+ .if IREALMODE_COMMON
+ LOAD_HANDLER(r10, \name\()_common)
+ mtctr r10
+ bctr
+ .else
+ .if \virt
+#ifndef CONFIG_RELOCATABLE
+ b \name\()_common_virt
+#else
+ LOAD_HANDLER(r10, \name\()_common_virt)
+ mtctr r10
+ bctr
+#endif
+ .else
+ LOAD_HANDLER(r10, \name\()_common_real)
+ mtctr r10
+ bctr
+ .endif
+ .endif
+.endm
+
+.macro GEN_INT_ENTRY name, virt, ool=0
+ SET_SCRATCH0(r13) /* save r13 */
+ GET_PACA(r13)
+ std r9,IAREA+EX_R9(r13) /* save r9 */
+BEGIN_FTR_SECTION
+ mfspr r9,SPRN_PPR
+END_FTR_SECTION_IFSET(CPU_FTR_HAS_PPR)
+ HMT_MEDIUM
+ std r10,IAREA+EX_R10(r13) /* save r10 */
+ .if ICFAR
+BEGIN_FTR_SECTION
+ mfspr r10,SPRN_CFAR
+END_FTR_SECTION_IFSET(CPU_FTR_CFAR)
+ .elseif ICFAR_IF_HVMODE
+BEGIN_FTR_SECTION
+ BEGIN_FTR_SECTION_NESTED(69)
+ mfspr r10,SPRN_CFAR
+ END_FTR_SECTION_NESTED(CPU_FTR_CFAR, CPU_FTR_CFAR, 69)
+FTR_SECTION_ELSE
+ BEGIN_FTR_SECTION_NESTED(69)
+ li r10,0
+ END_FTR_SECTION_NESTED(CPU_FTR_CFAR, CPU_FTR_CFAR, 69)
+ALT_FTR_SECTION_END_IFSET(CPU_FTR_HVMODE | CPU_FTR_ARCH_206)
+ .endif
+ .if \ool
+ .if !\virt
+ b tramp_real_\name
+ .pushsection .text
+ TRAMP_REAL_BEGIN(tramp_real_\name)
+ .else
+ b tramp_virt_\name
+ .pushsection .text
+ TRAMP_VIRT_BEGIN(tramp_virt_\name)
+ .endif
+ .endif
+
+BEGIN_FTR_SECTION
+ std r9,IAREA+EX_PPR(r13)
+END_FTR_SECTION_IFSET(CPU_FTR_HAS_PPR)
+ .if ICFAR || ICFAR_IF_HVMODE
+BEGIN_FTR_SECTION
+ std r10,IAREA+EX_CFAR(r13)
+END_FTR_SECTION_IFSET(CPU_FTR_CFAR)
+ .endif
+ INTERRUPT_TO_KERNEL
+ mfctr r10
+ std r10,IAREA+EX_CTR(r13)
+ mfcr r9
+ std r11,IAREA+EX_R11(r13) /* save r11 - r12 */
+ std r12,IAREA+EX_R12(r13)
+
+ /*
+ * DAR/DSISR, SCRATCH0 must be read before setting MSR[RI],
+ * because a d-side MCE will clobber those registers so is
+ * not recoverable if they are live.
+ */
+ GET_SCRATCH0(r10)
+ std r10,IAREA+EX_R13(r13)
+ .if IDAR && !IISIDE
+ .if IHSRR
+ mfspr r10,SPRN_HDAR
+ .else
+ mfspr r10,SPRN_DAR
+ .endif
+ std r10,IAREA+EX_DAR(r13)
+ .endif
+ .if IDSISR && !IISIDE
+ .if IHSRR
+ mfspr r10,SPRN_HDSISR
+ .else
+ mfspr r10,SPRN_DSISR
+ .endif
+ stw r10,IAREA+EX_DSISR(r13)
+ .endif
+
+ .if IHSRR_IF_HVMODE
+ BEGIN_FTR_SECTION
+ mfspr r11,SPRN_HSRR0 /* save HSRR0 */
+ mfspr r12,SPRN_HSRR1 /* and HSRR1 */
+ FTR_SECTION_ELSE
+ mfspr r11,SPRN_SRR0 /* save SRR0 */
+ mfspr r12,SPRN_SRR1 /* and SRR1 */
+ ALT_FTR_SECTION_END_IFSET(CPU_FTR_HVMODE | CPU_FTR_ARCH_206)
+ .elseif IHSRR
+ mfspr r11,SPRN_HSRR0 /* save HSRR0 */
+ mfspr r12,SPRN_HSRR1 /* and HSRR1 */
+ .else
+ mfspr r11,SPRN_SRR0 /* save SRR0 */
+ mfspr r12,SPRN_SRR1 /* and SRR1 */
+ .endif
+
+ .if IBRANCH_TO_COMMON
+ GEN_BRANCH_TO_COMMON \name \virt
+ .endif
+
+ .if \ool
+ .popsection
+ .endif
+.endm
+
+/*
+ * __GEN_COMMON_ENTRY is required to receive the branch from interrupt
+ * entry, except in the case of the real-mode handlers which require
+ * __GEN_REALMODE_COMMON_ENTRY.
+ *
+ * This switches to virtual mode and sets MSR[RI].
+ */
+.macro __GEN_COMMON_ENTRY name
+DEFINE_FIXED_SYMBOL(\name\()_common_real, text)
+\name\()_common_real:
+ .if IKVM_REAL
+ KVMTEST \name kvm_interrupt
+ .endif
+
+ ld r10,PACAKMSR(r13) /* get MSR value for kernel */
+ /* MSR[RI] is clear iff using SRR regs */
+ .if IHSRR_IF_HVMODE
+ BEGIN_FTR_SECTION
+ xori r10,r10,MSR_RI
+ END_FTR_SECTION_IFCLR(CPU_FTR_HVMODE)
+ .elseif ! IHSRR
+ xori r10,r10,MSR_RI
+ .endif
+ mtmsrd r10
+
+ .if IVIRT
+ .if IKVM_VIRT
+ b 1f /* skip the virt test coming from real */
+ .endif
+
+ .balign IFETCH_ALIGN_BYTES
+DEFINE_FIXED_SYMBOL(\name\()_common_virt, text)
+\name\()_common_virt:
+ .if IKVM_VIRT
+ KVMTEST \name kvm_interrupt
+1:
+ .endif
+ .endif /* IVIRT */
+.endm
+
+/*
+ * Don't switch to virt mode. Used for early MCE and HMI handlers that
+ * want to run in real mode.
+ */
+.macro __GEN_REALMODE_COMMON_ENTRY name
+DEFINE_FIXED_SYMBOL(\name\()_common_real, text)
+\name\()_common_real:
+ .if IKVM_REAL
+ KVMTEST \name kvm_interrupt
+ .endif
+.endm
+
+.macro __GEN_COMMON_BODY name
+ .if IMASK
+ .if ! ISTACK
+ .error "No support for masked interrupt to use custom stack"
+ .endif
+
+ /* If coming from user, skip soft-mask tests. */
+ andi. r10,r12,MSR_PR
+ bne 3f
+
+ /*
+ * Kernel code running below __end_soft_masked may be
+ * implicitly soft-masked if it is within the regions
+ * in the soft mask table.
+ */
+ LOAD_HANDLER(r10, __end_soft_masked)
+ cmpld r11,r10
+ bge+ 1f
+
+ /* SEARCH_SOFT_MASK_TABLE clobbers r9,r10,r12 */
+ mtctr r12
+ stw r9,PACA_EXGEN+EX_CCR(r13)
+ SEARCH_SOFT_MASK_TABLE
+ cmpdi r12,0
+ mfctr r12 /* Restore r12 to SRR1 */
+ lwz r9,PACA_EXGEN+EX_CCR(r13)
+ beq 1f /* Not in soft-mask table */
+ li r10,IMASK
+ b 2f /* In soft-mask table, always mask */
+
+ /* Test the soft mask state against our interrupt's bit */
+1: lbz r10,PACAIRQSOFTMASK(r13)
+2: andi. r10,r10,IMASK
+ /* Associate vector numbers with bits in paca->irq_happened */
+ .if IVEC == 0x500 || IVEC == 0xea0
+ li r10,PACA_IRQ_EE
+ .elseif IVEC == 0x900
+ li r10,PACA_IRQ_DEC
+ .elseif IVEC == 0xa00 || IVEC == 0xe80
+ li r10,PACA_IRQ_DBELL
+ .elseif IVEC == 0xe60
+ li r10,PACA_IRQ_HMI
+ .elseif IVEC == 0xf00
+ li r10,PACA_IRQ_PMI
+ .else
+ .abort "Bad maskable vector"
+ .endif
+
+ .if IHSRR_IF_HVMODE
+ BEGIN_FTR_SECTION
+ bne masked_Hinterrupt
+ FTR_SECTION_ELSE
+ bne masked_interrupt
+ ALT_FTR_SECTION_END_IFSET(CPU_FTR_HVMODE | CPU_FTR_ARCH_206)
+ .elseif IHSRR
+ bne masked_Hinterrupt
+ .else
+ bne masked_interrupt
+ .endif
+ .endif
+
+ .if ISTACK
+ andi. r10,r12,MSR_PR /* See if coming from user */
+3: mr r10,r1 /* Save r1 */
+ subi r1,r1,INT_FRAME_SIZE /* alloc frame on kernel stack */
+ beq- 100f
+ ld r1,PACAKSAVE(r13) /* kernel stack to use */
+100: tdgei r1,-INT_FRAME_SIZE /* trap if r1 is in userspace */
+ EMIT_BUG_ENTRY 100b,__FILE__,__LINE__,0
+ .endif
+
+ std r9,_CCR(r1) /* save CR in stackframe */
+ std r11,_NIP(r1) /* save SRR0 in stackframe */
+ std r12,_MSR(r1) /* save SRR1 in stackframe */
+ std r10,0(r1) /* make stack chain pointer */
+ std r0,GPR0(r1) /* save r0 in stackframe */
+ std r10,GPR1(r1) /* save r1 in stackframe */
+
+ /* Mark our [H]SRRs valid for return */
+ li r10,1
+ .if IHSRR_IF_HVMODE
+ BEGIN_FTR_SECTION
+ stb r10,PACAHSRR_VALID(r13)
+ FTR_SECTION_ELSE
+ stb r10,PACASRR_VALID(r13)
+ ALT_FTR_SECTION_END_IFSET(CPU_FTR_HVMODE | CPU_FTR_ARCH_206)
+ .elseif IHSRR
+ stb r10,PACAHSRR_VALID(r13)
+ .else
+ stb r10,PACASRR_VALID(r13)
+ .endif
+
+ .if ISTACK
+ .if IKUAP
+ kuap_save_amr_and_lock r9, r10, cr1, cr0
+ .endif
+ beq 101f /* if from kernel mode */
+BEGIN_FTR_SECTION
+ ld r9,IAREA+EX_PPR(r13) /* Read PPR from paca */
+ std r9,_PPR(r1)
+END_FTR_SECTION_IFSET(CPU_FTR_HAS_PPR)
+101:
+ .else
+ .if IKUAP
+ kuap_save_amr_and_lock r9, r10, cr1
+ .endif
+ .endif
+
+ /* Save original regs values from save area to stack frame. */
+ ld r9,IAREA+EX_R9(r13) /* move r9, r10 to stackframe */
+ ld r10,IAREA+EX_R10(r13)
+ std r9,GPR9(r1)
+ std r10,GPR10(r1)
+ ld r9,IAREA+EX_R11(r13) /* move r11 - r13 to stackframe */
+ ld r10,IAREA+EX_R12(r13)
+ ld r11,IAREA+EX_R13(r13)
+ std r9,GPR11(r1)
+ std r10,GPR12(r1)
+ std r11,GPR13(r1)
+
+ SAVE_NVGPRS(r1)
+
+ .if IDAR
+ .if IISIDE
+ ld r10,_NIP(r1)
+ .else
+ ld r10,IAREA+EX_DAR(r13)
+ .endif
+ std r10,_DAR(r1)
+ .endif
+
+ .if IDSISR
+ .if IISIDE
+ ld r10,_MSR(r1)
+ lis r11,DSISR_SRR1_MATCH_64S@h
+ and r10,r10,r11
+ .else
+ lwz r10,IAREA+EX_DSISR(r13)
+ .endif
+ std r10,_DSISR(r1)
+ .endif
+
+BEGIN_FTR_SECTION
+ .if ICFAR || ICFAR_IF_HVMODE
+ ld r10,IAREA+EX_CFAR(r13)
+ .else
+ li r10,0
+ .endif
+ std r10,ORIG_GPR3(r1)
+END_FTR_SECTION_IFSET(CPU_FTR_CFAR)
+ ld r10,IAREA+EX_CTR(r13)
+ std r10,_CTR(r1)
+ std r2,GPR2(r1) /* save r2 in stackframe */
+ SAVE_GPRS(3, 8, r1) /* save r3 - r8 in stackframe */
+ mflr r9 /* Get LR, later save to stack */
+ LOAD_PACA_TOC() /* get kernel TOC into r2 */
+ std r9,_LINK(r1)
+ lbz r10,PACAIRQSOFTMASK(r13)
+ mfspr r11,SPRN_XER /* save XER in stackframe */
+ std r10,SOFTE(r1)
+ std r11,_XER(r1)
+ li r9,IVEC
+ std r9,_TRAP(r1) /* set trap number */
+ li r10,0
+ LOAD_REG_IMMEDIATE(r11, STACK_FRAME_REGS_MARKER)
+ std r10,RESULT(r1) /* clear regs->result */
+ std r11,STACK_FRAME_OVERHEAD-16(r1) /* mark the frame */
+.endm
+
+/*
+ * On entry r13 points to the paca, r9-r13 are saved in the paca,
+ * r9 contains the saved CR, r11 and r12 contain the saved SRR0 and
+ * SRR1, and relocation is on.
+ *
+ * If stack=0, then the stack is already set in r1, and r1 is saved in r10.
+ * PPR save and CPU accounting is not done for the !stack case (XXX why not?)
+ */
+.macro GEN_COMMON name
+ __GEN_COMMON_ENTRY \name
+ __GEN_COMMON_BODY \name
+.endm
+
+.macro SEARCH_RESTART_TABLE
+#ifdef CONFIG_RELOCATABLE
+ mr r12,r2
+ LOAD_PACA_TOC()
+ LOAD_REG_ADDR(r9, __start___restart_table)
+ LOAD_REG_ADDR(r10, __stop___restart_table)
+ mr r2,r12
+#else
+ LOAD_REG_IMMEDIATE_SYM(r9, r12, __start___restart_table)
+ LOAD_REG_IMMEDIATE_SYM(r10, r12, __stop___restart_table)
+#endif
+300:
+ cmpd r9,r10
+ beq 302f
+ ld r12,0(r9)
+ cmpld r11,r12
+ blt 301f
+ ld r12,8(r9)
+ cmpld r11,r12
+ bge 301f
+ ld r12,16(r9)
+ b 303f
+301:
+ addi r9,r9,24
+ b 300b
+302:
+ li r12,0
+303:
+.endm
+
+.macro SEARCH_SOFT_MASK_TABLE
+#ifdef CONFIG_RELOCATABLE
+ mr r12,r2
+ LOAD_PACA_TOC()
+ LOAD_REG_ADDR(r9, __start___soft_mask_table)
+ LOAD_REG_ADDR(r10, __stop___soft_mask_table)
+ mr r2,r12
+#else
+ LOAD_REG_IMMEDIATE_SYM(r9, r12, __start___soft_mask_table)
+ LOAD_REG_IMMEDIATE_SYM(r10, r12, __stop___soft_mask_table)
+#endif
+300:
+ cmpd r9,r10
+ beq 302f
+ ld r12,0(r9)
+ cmpld r11,r12
+ blt 301f
+ ld r12,8(r9)
+ cmpld r11,r12
+ bge 301f
+ li r12,1
+ b 303f
+301:
+ addi r9,r9,16
+ b 300b
+302:
+ li r12,0
+303:
+.endm
+
+/*
+ * Restore all registers including H/SRR0/1 saved in a stack frame of a
+ * standard exception.
+ */
+.macro EXCEPTION_RESTORE_REGS hsrr=0
+ /* Move original SRR0 and SRR1 into the respective regs */
+ ld r9,_MSR(r1)
+ li r10,0
+ .if \hsrr
+ mtspr SPRN_HSRR1,r9
+ stb r10,PACAHSRR_VALID(r13)
+ .else
+ mtspr SPRN_SRR1,r9
+ stb r10,PACASRR_VALID(r13)
+ .endif
+ ld r9,_NIP(r1)
+ .if \hsrr
+ mtspr SPRN_HSRR0,r9
+ .else
+ mtspr SPRN_SRR0,r9
+ .endif
+ ld r9,_CTR(r1)
+ mtctr r9
+ ld r9,_XER(r1)
+ mtxer r9
+ ld r9,_LINK(r1)
+ mtlr r9
+ ld r9,_CCR(r1)
+ mtcr r9
+ REST_GPRS(2, 13, r1)
+ REST_GPR(0, r1)
+ /* restore original r1. */
+ ld r1,GPR1(r1)
+.endm
+
+/*
+ * EARLY_BOOT_FIXUP - Fix real-mode interrupt with wrong endian in early boot.
+ *
+ * There's a short window during boot where although the kernel is running
+ * little endian, any exceptions will cause the CPU to switch back to big
+ * endian. For example a WARN() boils down to a trap instruction, which will
+ * cause a program check, and we end up here but with the CPU in big endian
+ * mode. The first instruction of the program check handler (in GEN_INT_ENTRY
+ * below) is an mtsprg, which when executed in the wrong endian is an lhzu with
+ * a ~3GB displacement from r3. The content of r3 is random, so that is a load
+ * from some random location, and depending on the system can easily lead to a
+ * checkstop, or an infinitely recursive page fault.
+ *
+ * So to handle that case we have a trampoline here that can detect we are in
+ * the wrong endian and flip us back to the correct endian. We can't flip
+ * MSR[LE] using mtmsr, so we have to use rfid. That requires backing up SRR0/1
+ * as well as a GPR. To do that we use SPRG0/2/3, as SPRG1 is already used for
+ * the paca. SPRG3 is user readable, but this trampoline is only active very
+ * early in boot, and SPRG3 will be reinitialised in vdso_getcpu_init() before
+ * userspace starts.
+ */
+.macro EARLY_BOOT_FIXUP
+BEGIN_FTR_SECTION
+#ifdef CONFIG_CPU_LITTLE_ENDIAN
+ tdi 0,0,0x48 // Trap never, or in reverse endian: b . + 8
+ b 2f // Skip trampoline if endian is correct
+ .long 0xa643707d // mtsprg 0, r11 Backup r11
+ .long 0xa6027a7d // mfsrr0 r11
+ .long 0xa643727d // mtsprg 2, r11 Backup SRR0 in SPRG2
+ .long 0xa6027b7d // mfsrr1 r11
+ .long 0xa643737d // mtsprg 3, r11 Backup SRR1 in SPRG3
+ .long 0xa600607d // mfmsr r11
+ .long 0x01006b69 // xori r11, r11, 1 Invert MSR[LE]
+ .long 0xa6037b7d // mtsrr1 r11
+ /*
+ * This is 'li r11,1f' where 1f is the absolute address of that
+ * label, byteswapped into the SI field of the instruction.
+ */
+ .long 0x00006039 | \
+ ((ABS_ADDR(1f, real_vectors) & 0x00ff) << 24) | \
+ ((ABS_ADDR(1f, real_vectors) & 0xff00) << 8)
+ .long 0xa6037a7d // mtsrr0 r11
+ .long 0x2400004c // rfid
+1:
+ mfsprg r11, 3
+ mtsrr1 r11 // Restore SRR1
+ mfsprg r11, 2
+ mtsrr0 r11 // Restore SRR0
+ mfsprg r11, 0 // Restore r11
+2:
+#endif
+ /*
+ * program check could hit at any time, and pseries can not block
+ * MSR[ME] in early boot. So check if there is anything useful in r13
+ * yet, and spin forever if not.
+ */
+ mtsprg 0, r11
+ mfcr r11
+ cmpdi r13, 0
+ beq .
+ mtcr r11
+ mfsprg r11, 0
+END_FTR_SECTION(0, 1) // nop out after boot
+.endm
+
+/*
+ * There are a few constraints to be concerned with.
+ * - Real mode exceptions code/data must be located at their physical location.
+ * - Virtual mode exceptions must be mapped at their 0xc000... location.
+ * - Fixed location code must not call directly beyond the __end_interrupts
+ * area when built with CONFIG_RELOCATABLE. LOAD_HANDLER / bctr sequence
+ * must be used.
+ * - LOAD_HANDLER targets must be within first 64K of physical 0 /
+ * virtual 0xc00...
+ * - Conditional branch targets must be within +/-32K of caller.
+ *
+ * "Virtual exceptions" run with relocation on (MSR_IR=1, MSR_DR=1), and
+ * therefore don't have to run in physically located code or rfid to
+ * virtual mode kernel code. However on relocatable kernels they do have
+ * to branch to KERNELBASE offset because the rest of the kernel (outside
+ * the exception vectors) may be located elsewhere.
+ *
+ * Virtual exceptions correspond with physical, except their entry points
+ * are offset by 0xc000000000000000 and also tend to get an added 0x4000
+ * offset applied. Virtual exceptions are enabled with the Alternate
+ * Interrupt Location (AIL) bit set in the LPCR. However this does not
+ * guarantee they will be delivered virtually. Some conditions (see the ISA)
+ * cause exceptions to be delivered in real mode.
+ *
+ * The scv instructions are a special case. They get a 0x3000 offset applied.
+ * scv exceptions have unique reentrancy properties, see below.
+ *
+ * It's impossible to receive interrupts below 0x300 via AIL.
+ *
+ * KVM: None of the virtual exceptions are from the guest. Anything that
+ * escalated to HV=1 from HV=0 is delivered via real mode handlers.
+ *
+ *
+ * We layout physical memory as follows:
+ * 0x0000 - 0x00ff : Secondary processor spin code
+ * 0x0100 - 0x18ff : Real mode pSeries interrupt vectors
+ * 0x1900 - 0x2fff : Real mode trampolines
+ * 0x3000 - 0x58ff : Relon (IR=1,DR=1) mode pSeries interrupt vectors
+ * 0x5900 - 0x6fff : Relon mode trampolines
+ * 0x7000 - 0x7fff : FWNMI data area
+ * 0x8000 - .... : Common interrupt handlers, remaining early
+ * setup code, rest of kernel.
+ *
+ * We could reclaim 0x4000-0x42ff for real mode trampolines if the space
+ * is necessary. Until then it's more consistent to explicitly put VIRT_NONE
+ * vectors there.
+ */
+OPEN_FIXED_SECTION(real_vectors, 0x0100, 0x1900)
+OPEN_FIXED_SECTION(real_trampolines, 0x1900, 0x3000)
+OPEN_FIXED_SECTION(virt_vectors, 0x3000, 0x5900)
+OPEN_FIXED_SECTION(virt_trampolines, 0x5900, 0x7000)
+
+#ifdef CONFIG_PPC_POWERNV
+ .globl start_real_trampolines
+ .globl end_real_trampolines
+ .globl start_virt_trampolines
+ .globl end_virt_trampolines
+#endif
+
+#if defined(CONFIG_PPC_PSERIES) || defined(CONFIG_PPC_POWERNV)
+/*
+ * Data area reserved for FWNMI option.
+ * This address (0x7000) is fixed by the RPA.
+ * pseries and powernv need to keep the whole page from
+ * 0x7000 to 0x8000 free for use by the firmware
+ */
+ZERO_FIXED_SECTION(fwnmi_page, 0x7000, 0x8000)
+OPEN_TEXT_SECTION(0x8000)
+#else
+OPEN_TEXT_SECTION(0x7000)
+#endif
+
+USE_FIXED_SECTION(real_vectors)
+
+/*
+ * This is the start of the interrupt handlers for pSeries
+ * This code runs with relocation off.
+ * Code from here to __end_interrupts gets copied down to real
+ * address 0x100 when we are running a relocatable kernel.
+ * Therefore any relative branches in this section must only
+ * branch to labels in this section.
+ */
+ .globl __start_interrupts
+__start_interrupts:
+
+/**
+ * Interrupt 0x3000 - System Call Vectored Interrupt (syscall).
+ * This is a synchronous interrupt invoked with the "scv" instruction. The
+ * system call does not alter the HV bit, so it is directed to the OS.
+ *
+ * Handling:
+ * scv instructions enter the kernel without changing EE, RI, ME, or HV.
+ * In particular, this means we can take a maskable interrupt at any point
+ * in the scv handler, which is unlike any other interrupt. This is solved
+ * by treating the instruction addresses in the handler as being soft-masked,
+ * by adding a SOFT_MASK_TABLE entry for them.
+ *
+ * AIL-0 mode scv exceptions go to 0x17000-0x17fff, but we set AIL-3 and
+ * ensure scv is never executed with relocation off, which means AIL-0
+ * should never happen.
+ *
+ * Before leaving the following inside-__end_soft_masked text, at least of the
+ * following must be true:
+ * - MSR[PR]=1 (i.e., return to userspace)
+ * - MSR_EE|MSR_RI is clear (no reentrant exceptions)
+ * - Standard kernel environment is set up (stack, paca, etc)
+ *
+ * KVM:
+ * These interrupts do not elevate HV 0->1, so HV is not involved. PR KVM
+ * ensures that FSCR[SCV] is disabled whenever it has to force AIL off.
+ *
+ * Call convention:
+ *
+ * syscall register convention is in Documentation/powerpc/syscall64-abi.rst
+ */
+EXC_VIRT_BEGIN(system_call_vectored, 0x3000, 0x1000)
+ /* SCV 0 */
+ mr r9,r13
+ GET_PACA(r13)
+ mflr r11
+ mfctr r12
+ li r10,IRQS_ALL_DISABLED
+ stb r10,PACAIRQSOFTMASK(r13)
+#ifdef CONFIG_RELOCATABLE
+ b system_call_vectored_tramp
+#else
+ b system_call_vectored_common
+#endif
+ nop
+
+ /* SCV 1 - 127 */
+ .rept 127
+ mr r9,r13
+ GET_PACA(r13)
+ mflr r11
+ mfctr r12
+ li r10,IRQS_ALL_DISABLED
+ stb r10,PACAIRQSOFTMASK(r13)
+ li r0,-1 /* cause failure */
+#ifdef CONFIG_RELOCATABLE
+ b system_call_vectored_sigill_tramp
+#else
+ b system_call_vectored_sigill
+#endif
+ .endr
+EXC_VIRT_END(system_call_vectored, 0x3000, 0x1000)
+
+// Treat scv vectors as soft-masked, see comment above.
+// Use absolute values rather than labels here, so they don't get relocated,
+// because this code runs unrelocated.
+SOFT_MASK_TABLE(0xc000000000003000, 0xc000000000004000)
+
+#ifdef CONFIG_RELOCATABLE
+TRAMP_VIRT_BEGIN(system_call_vectored_tramp)
+ __LOAD_HANDLER(r10, system_call_vectored_common, virt_trampolines)
+ mtctr r10
+ bctr
+
+TRAMP_VIRT_BEGIN(system_call_vectored_sigill_tramp)
+ __LOAD_HANDLER(r10, system_call_vectored_sigill, virt_trampolines)
+ mtctr r10
+ bctr
+#endif
+
+
+/* No virt vectors corresponding with 0x0..0x100 */
+EXC_VIRT_NONE(0x4000, 0x100)
+
+
+/**
+ * Interrupt 0x100 - System Reset Interrupt (SRESET aka NMI).
+ * This is a non-maskable, asynchronous interrupt always taken in real-mode.
+ * It is caused by:
+ * - Wake from power-saving state, on powernv.
+ * - An NMI from another CPU, triggered by firmware or hypercall.
+ * - As crash/debug signal injected from BMC, firmware or hypervisor.
+ *
+ * Handling:
+ * Power-save wakeup is the only performance critical path, so this is
+ * determined quickly as possible first. In this case volatile registers
+ * can be discarded and SPRs like CFAR don't need to be read.
+ *
+ * If not a powersave wakeup, then it's run as a regular interrupt, however
+ * it uses its own stack and PACA save area to preserve the regular kernel
+ * environment for debugging.
+ *
+ * This interrupt is not maskable, so triggering it when MSR[RI] is clear,
+ * or SCRATCH0 is in use, etc. may cause a crash. It's also not entirely
+ * correct to switch to virtual mode to run the regular interrupt handler
+ * because it might be interrupted when the MMU is in a bad state (e.g., SLB
+ * is clear).
+ *
+ * FWNMI:
+ * PAPR specifies a "fwnmi" facility which sends the sreset to a different
+ * entry point with a different register set up. Some hypervisors will
+ * send the sreset to 0x100 in the guest if it is not fwnmi capable.
+ *
+ * KVM:
+ * Unlike most SRR interrupts, this may be taken by the host while executing
+ * in a guest, so a KVM test is required. KVM will pull the CPU out of guest
+ * mode and then raise the sreset.
+ */
+INT_DEFINE_BEGIN(system_reset)
+ IVEC=0x100
+ IAREA=PACA_EXNMI
+ IVIRT=0 /* no virt entry point */
+ ISTACK=0
+ IKVM_REAL=1
+INT_DEFINE_END(system_reset)
+
+EXC_REAL_BEGIN(system_reset, 0x100, 0x100)
+#ifdef CONFIG_PPC_P7_NAP
+ /*
+ * If running native on arch 2.06 or later, check if we are waking up
+ * from nap/sleep/winkle, and branch to idle handler. This tests SRR1
+ * bits 46:47. A non-0 value indicates that we are coming from a power
+ * saving state. The idle wakeup handler initially runs in real mode,
+ * but we branch to the 0xc000... address so we can turn on relocation
+ * with mtmsrd later, after SPRs are restored.
+ *
+ * Careful to minimise cost for the fast path (idle wakeup) while
+ * also avoiding clobbering CFAR for the debug path (non-idle).
+ *
+ * For the idle wake case volatile registers can be clobbered, which
+ * is why we use those initially. If it turns out to not be an idle
+ * wake, carefully put everything back the way it was, so we can use
+ * common exception macros to handle it.
+ */
+BEGIN_FTR_SECTION
+ SET_SCRATCH0(r13)
+ GET_PACA(r13)
+ std r3,PACA_EXNMI+0*8(r13)
+ std r4,PACA_EXNMI+1*8(r13)
+ std r5,PACA_EXNMI+2*8(r13)
+ mfspr r3,SPRN_SRR1
+ mfocrf r4,0x80
+ rlwinm. r5,r3,47-31,30,31
+ bne+ system_reset_idle_wake
+ /* Not powersave wakeup. Restore regs for regular interrupt handler. */
+ mtocrf 0x80,r4
+ ld r3,PACA_EXNMI+0*8(r13)
+ ld r4,PACA_EXNMI+1*8(r13)
+ ld r5,PACA_EXNMI+2*8(r13)
+ GET_SCRATCH0(r13)
+END_FTR_SECTION_IFSET(CPU_FTR_HVMODE | CPU_FTR_ARCH_206)
+#endif
+
+ GEN_INT_ENTRY system_reset, virt=0
+ /*
+ * In theory, we should not enable relocation here if it was disabled
+ * in SRR1, because the MMU may not be configured to support it (e.g.,
+ * SLB may have been cleared). In practice, there should only be a few
+ * small windows where that's the case, and sreset is considered to
+ * be dangerous anyway.
+ */
+EXC_REAL_END(system_reset, 0x100, 0x100)
+EXC_VIRT_NONE(0x4100, 0x100)
+
+#ifdef CONFIG_PPC_P7_NAP
+TRAMP_REAL_BEGIN(system_reset_idle_wake)
+ /* We are waking up from idle, so may clobber any volatile register */
+ cmpwi cr1,r5,2
+ bltlr cr1 /* no state loss, return to idle caller with r3=SRR1 */
+ __LOAD_FAR_HANDLER(r12, DOTSYM(idle_return_gpr_loss), real_trampolines)
+ mtctr r12
+ bctr
+#endif
+
+#ifdef CONFIG_PPC_PSERIES
+/*
+ * Vectors for the FWNMI option. Share common code.
+ */
+TRAMP_REAL_BEGIN(system_reset_fwnmi)
+ GEN_INT_ENTRY system_reset, virt=0
+
+#endif /* CONFIG_PPC_PSERIES */
+
+EXC_COMMON_BEGIN(system_reset_common)
+ __GEN_COMMON_ENTRY system_reset
+ /*
+ * Increment paca->in_nmi. When the interrupt entry wrapper later
+ * enable MSR_RI, then SLB or MCE will be able to recover, but a nested
+ * NMI will notice in_nmi and not recover because of the use of the NMI
+ * stack. in_nmi reentrancy is tested in system_reset_exception.
+ */
+ lhz r10,PACA_IN_NMI(r13)
+ addi r10,r10,1
+ sth r10,PACA_IN_NMI(r13)
+
+ mr r10,r1
+ ld r1,PACA_NMI_EMERG_SP(r13)
+ subi r1,r1,INT_FRAME_SIZE
+ __GEN_COMMON_BODY system_reset
+
+ addi r3,r1,STACK_FRAME_OVERHEAD
+ bl system_reset_exception
+
+ /* Clear MSR_RI before setting SRR0 and SRR1. */
+ li r9,0
+ mtmsrd r9,1
+
+ /*
+ * MSR_RI is clear, now we can decrement paca->in_nmi.
+ */
+ lhz r10,PACA_IN_NMI(r13)
+ subi r10,r10,1
+ sth r10,PACA_IN_NMI(r13)
+
+ kuap_kernel_restore r9, r10
+ EXCEPTION_RESTORE_REGS
+ RFI_TO_USER_OR_KERNEL
+
+
+/**
+ * Interrupt 0x200 - Machine Check Interrupt (MCE).
+ * This is a non-maskable interrupt always taken in real-mode. It can be
+ * synchronous or asynchronous, caused by hardware or software, and it may be
+ * taken in a power-saving state.
+ *
+ * Handling:
+ * Similarly to system reset, this uses its own stack and PACA save area,
+ * the difference is re-entrancy is allowed on the machine check stack.
+ *
+ * machine_check_early is run in real mode, and carefully decodes the
+ * machine check and tries to handle it (e.g., flush the SLB if there was an
+ * error detected there), determines if it was recoverable and logs the
+ * event.
+ *
+ * This early code does not "reconcile" irq soft-mask state like SRESET or
+ * regular interrupts do, so irqs_disabled() among other things may not work
+ * properly (irq disable/enable already doesn't work because irq tracing can
+ * not work in real mode).
+ *
+ * Then, depending on the execution context when the interrupt is taken, there
+ * are 3 main actions:
+ * - Executing in kernel mode. The event is queued with irq_work, which means
+ * it is handled when it is next safe to do so (i.e., the kernel has enabled
+ * interrupts), which could be immediately when the interrupt returns. This
+ * avoids nasty issues like switching to virtual mode when the MMU is in a
+ * bad state, or when executing OPAL code. (SRESET is exposed to such issues,
+ * but it has different priorities). Check to see if the CPU was in power
+ * save, and return via the wake up code if it was.
+ *
+ * - Executing in user mode. machine_check_exception is run like a normal
+ * interrupt handler, which processes the data generated by the early handler.
+ *
+ * - Executing in guest mode. The interrupt is run with its KVM test, and
+ * branches to KVM to deal with. KVM may queue the event for the host
+ * to report later.
+ *
+ * This interrupt is not maskable, so if it triggers when MSR[RI] is clear,
+ * or SCRATCH0 is in use, it may cause a crash.
+ *
+ * KVM:
+ * See SRESET.
+ */
+INT_DEFINE_BEGIN(machine_check_early)
+ IVEC=0x200
+ IAREA=PACA_EXMC
+ IVIRT=0 /* no virt entry point */
+ IREALMODE_COMMON=1
+ ISTACK=0
+ IDAR=1
+ IDSISR=1
+ IKUAP=0 /* We don't touch AMR here, we never go to virtual mode */
+INT_DEFINE_END(machine_check_early)
+
+INT_DEFINE_BEGIN(machine_check)
+ IVEC=0x200
+ IAREA=PACA_EXMC
+ IVIRT=0 /* no virt entry point */
+ IDAR=1
+ IDSISR=1
+ IKVM_REAL=1
+INT_DEFINE_END(machine_check)
+
+EXC_REAL_BEGIN(machine_check, 0x200, 0x100)
+ EARLY_BOOT_FIXUP
+ GEN_INT_ENTRY machine_check_early, virt=0
+EXC_REAL_END(machine_check, 0x200, 0x100)
+EXC_VIRT_NONE(0x4200, 0x100)
+
+#ifdef CONFIG_PPC_PSERIES
+TRAMP_REAL_BEGIN(machine_check_fwnmi)
+ /* See comment at machine_check exception, don't turn on RI */
+ GEN_INT_ENTRY machine_check_early, virt=0
+#endif
+
+#define MACHINE_CHECK_HANDLER_WINDUP \
+ /* Clear MSR_RI before setting SRR0 and SRR1. */\
+ li r9,0; \
+ mtmsrd r9,1; /* Clear MSR_RI */ \
+ /* Decrement paca->in_mce now RI is clear. */ \
+ lhz r12,PACA_IN_MCE(r13); \
+ subi r12,r12,1; \
+ sth r12,PACA_IN_MCE(r13); \
+ EXCEPTION_RESTORE_REGS
+
+EXC_COMMON_BEGIN(machine_check_early_common)
+ __GEN_REALMODE_COMMON_ENTRY machine_check_early
+
+ /*
+ * Switch to mc_emergency stack and handle re-entrancy (we limit
+ * the nested MCE upto level 4 to avoid stack overflow).
+ * Save MCE registers srr1, srr0, dar and dsisr and then set ME=1
+ *
+ * We use paca->in_mce to check whether this is the first entry or
+ * nested machine check. We increment paca->in_mce to track nested
+ * machine checks.
+ *
+ * If this is the first entry then set stack pointer to
+ * paca->mc_emergency_sp, otherwise r1 is already pointing to
+ * stack frame on mc_emergency stack.
+ *
+ * NOTE: We are here with MSR_ME=0 (off), which means we risk a
+ * checkstop if we get another machine check exception before we do
+ * rfid with MSR_ME=1.
+ *
+ * This interrupt can wake directly from idle. If that is the case,
+ * the machine check is handled then the idle wakeup code is called
+ * to restore state.
+ */
+ lhz r10,PACA_IN_MCE(r13)
+ cmpwi r10,0 /* Are we in nested machine check */
+ cmpwi cr1,r10,MAX_MCE_DEPTH /* Are we at maximum nesting */
+ addi r10,r10,1 /* increment paca->in_mce */
+ sth r10,PACA_IN_MCE(r13)
+
+ mr r10,r1 /* Save r1 */
+ bne 1f
+ /* First machine check entry */
+ ld r1,PACAMCEMERGSP(r13) /* Use MC emergency stack */
+1: /* Limit nested MCE to level 4 to avoid stack overflow */
+ bgt cr1,unrecoverable_mce /* Check if we hit limit of 4 */
+ subi r1,r1,INT_FRAME_SIZE /* alloc stack frame */
+
+ __GEN_COMMON_BODY machine_check_early
+
+BEGIN_FTR_SECTION
+ bl enable_machine_check
+END_FTR_SECTION_IFSET(CPU_FTR_HVMODE)
+ addi r3,r1,STACK_FRAME_OVERHEAD
+BEGIN_FTR_SECTION
+ bl machine_check_early_boot
+END_FTR_SECTION(0, 1) // nop out after boot
+ bl machine_check_early
+ std r3,RESULT(r1) /* Save result */
+ ld r12,_MSR(r1)
+
+#ifdef CONFIG_PPC_P7_NAP
+ /*
+ * Check if thread was in power saving mode. We come here when any
+ * of the following is true:
+ * a. thread wasn't in power saving mode
+ * b. thread was in power saving mode with no state loss,
+ * supervisor state loss or hypervisor state loss.
+ *
+ * Go back to nap/sleep/winkle mode again if (b) is true.
+ */
+BEGIN_FTR_SECTION
+ rlwinm. r11,r12,47-31,30,31
+ bne machine_check_idle_common
+END_FTR_SECTION_IFSET(CPU_FTR_HVMODE | CPU_FTR_ARCH_206)
+#endif
+
+#ifdef CONFIG_KVM_BOOK3S_64_HANDLER
+ /*
+ * Check if we are coming from guest. If yes, then run the normal
+ * exception handler which will take the
+ * machine_check_kvm->kvm_interrupt branch to deliver the MC event
+ * to guest.
+ */
+ lbz r11,HSTATE_IN_GUEST(r13)
+ cmpwi r11,0 /* Check if coming from guest */
+ bne mce_deliver /* continue if we are. */
+#endif
+
+ /*
+ * Check if we are coming from userspace. If yes, then run the normal
+ * exception handler which will deliver the MC event to this kernel.
+ */
+ andi. r11,r12,MSR_PR /* See if coming from user. */
+ bne mce_deliver /* continue in V mode if we are. */
+
+ /*
+ * At this point we are coming from kernel context.
+ * Queue up the MCE event and return from the interrupt.
+ * But before that, check if this is an un-recoverable exception.
+ * If yes, then stay on emergency stack and panic.
+ */
+ andi. r11,r12,MSR_RI
+ beq unrecoverable_mce
+
+ /*
+ * Check if we have successfully handled/recovered from error, if not
+ * then stay on emergency stack and panic.
+ */
+ ld r3,RESULT(r1) /* Load result */
+ cmpdi r3,0 /* see if we handled MCE successfully */
+ beq unrecoverable_mce /* if !handled then panic */
+
+ /*
+ * Return from MC interrupt.
+ * Queue up the MCE event so that we can log it later, while
+ * returning from kernel or opal call.
+ */
+ bl machine_check_queue_event
+ MACHINE_CHECK_HANDLER_WINDUP
+ RFI_TO_KERNEL
+
+mce_deliver:
+ /*
+ * This is a host user or guest MCE. Restore all registers, then
+ * run the "late" handler. For host user, this will run the
+ * machine_check_exception handler in virtual mode like a normal
+ * interrupt handler. For guest, this will trigger the KVM test
+ * and branch to the KVM interrupt similarly to other interrupts.
+ */
+BEGIN_FTR_SECTION
+ ld r10,ORIG_GPR3(r1)
+ mtspr SPRN_CFAR,r10
+END_FTR_SECTION_IFSET(CPU_FTR_CFAR)
+ MACHINE_CHECK_HANDLER_WINDUP
+ GEN_INT_ENTRY machine_check, virt=0
+
+EXC_COMMON_BEGIN(machine_check_common)
+ /*
+ * Machine check is different because we use a different
+ * save area: PACA_EXMC instead of PACA_EXGEN.
+ */
+ GEN_COMMON machine_check
+ addi r3,r1,STACK_FRAME_OVERHEAD
+ bl machine_check_exception_async
+ b interrupt_return_srr
+
+
+#ifdef CONFIG_PPC_P7_NAP
+/*
+ * This is an idle wakeup. Low level machine check has already been
+ * done. Queue the event then call the idle code to do the wake up.
+ */
+EXC_COMMON_BEGIN(machine_check_idle_common)
+ bl machine_check_queue_event
+
+ /*
+ * GPR-loss wakeups are relatively straightforward, because the
+ * idle sleep code has saved all non-volatile registers on its
+ * own stack, and r1 in PACAR1.
+ *
+ * For no-loss wakeups the r1 and lr registers used by the
+ * early machine check handler have to be restored first. r2 is
+ * the kernel TOC, so no need to restore it.
+ *
+ * Then decrement MCE nesting after finishing with the stack.
+ */
+ ld r3,_MSR(r1)
+ ld r4,_LINK(r1)
+ ld r1,GPR1(r1)
+
+ lhz r11,PACA_IN_MCE(r13)
+ subi r11,r11,1
+ sth r11,PACA_IN_MCE(r13)
+
+ mtlr r4
+ rlwinm r10,r3,47-31,30,31
+ cmpwi cr1,r10,2
+ bltlr cr1 /* no state loss, return to idle caller with r3=SRR1 */
+ b idle_return_gpr_loss
+#endif
+
+EXC_COMMON_BEGIN(unrecoverable_mce)
+ /*
+ * We are going down. But there are chances that we might get hit by
+ * another MCE during panic path and we may run into unstable state
+ * with no way out. Hence, turn ME bit off while going down, so that
+ * when another MCE is hit during panic path, system will checkstop
+ * and hypervisor will get restarted cleanly by SP.
+ */
+BEGIN_FTR_SECTION
+ li r10,0 /* clear MSR_RI */
+ mtmsrd r10,1
+ bl disable_machine_check
+END_FTR_SECTION_IFSET(CPU_FTR_HVMODE)
+ ld r10,PACAKMSR(r13)
+ li r3,MSR_ME
+ andc r10,r10,r3
+ mtmsrd r10
+
+ lhz r12,PACA_IN_MCE(r13)
+ subi r12,r12,1
+ sth r12,PACA_IN_MCE(r13)
+
+ /*
+ * Invoke machine_check_exception to print MCE event and panic.
+ * This is the NMI version of the handler because we are called from
+ * the early handler which is a true NMI.
+ */
+ addi r3,r1,STACK_FRAME_OVERHEAD
+ bl machine_check_exception
+
+ /*
+ * We will not reach here. Even if we did, there is no way out.
+ * Call unrecoverable_exception and die.
+ */
+ addi r3,r1,STACK_FRAME_OVERHEAD
+ bl unrecoverable_exception
+ b .
+
+
+/**
+ * Interrupt 0x300 - Data Storage Interrupt (DSI).
+ * This is a synchronous interrupt generated due to a data access exception,
+ * e.g., a load orstore which does not have a valid page table entry with
+ * permissions. DAWR matches also fault here, as do RC updates, and minor misc
+ * errors e.g., copy/paste, AMO, certain invalid CI accesses, etc.
+ *
+ * Handling:
+ * - Hash MMU
+ * Go to do_hash_fault, which attempts to fill the HPT from an entry in the
+ * Linux page table. Hash faults can hit in kernel mode in a fairly
+ * arbitrary state (e.g., interrupts disabled, locks held) when accessing
+ * "non-bolted" regions, e.g., vmalloc space. However these should always be
+ * backed by Linux page table entries.
+ *
+ * If no entry is found the Linux page fault handler is invoked (by
+ * do_hash_fault). Linux page faults can happen in kernel mode due to user
+ * copy operations of course.
+ *
+ * KVM: The KVM HDSI handler may perform a load with MSR[DR]=1 in guest
+ * MMU context, which may cause a DSI in the host, which must go to the
+ * KVM handler. MSR[IR] is not enabled, so the real-mode handler will
+ * always be used regardless of AIL setting.
+ *
+ * - Radix MMU
+ * The hardware loads from the Linux page table directly, so a fault goes
+ * immediately to Linux page fault.
+ *
+ * Conditions like DAWR match are handled on the way in to Linux page fault.
+ */
+INT_DEFINE_BEGIN(data_access)
+ IVEC=0x300
+ IDAR=1
+ IDSISR=1
+ IKVM_REAL=1
+INT_DEFINE_END(data_access)
+
+EXC_REAL_BEGIN(data_access, 0x300, 0x80)
+ GEN_INT_ENTRY data_access, virt=0
+EXC_REAL_END(data_access, 0x300, 0x80)
+EXC_VIRT_BEGIN(data_access, 0x4300, 0x80)
+ GEN_INT_ENTRY data_access, virt=1
+EXC_VIRT_END(data_access, 0x4300, 0x80)
+EXC_COMMON_BEGIN(data_access_common)
+ GEN_COMMON data_access
+ ld r4,_DSISR(r1)
+ addi r3,r1,STACK_FRAME_OVERHEAD
+ andis. r0,r4,DSISR_DABRMATCH@h
+ bne- 1f
+#ifdef CONFIG_PPC_64S_HASH_MMU
+BEGIN_MMU_FTR_SECTION
+ bl do_hash_fault
+MMU_FTR_SECTION_ELSE
+ bl do_page_fault
+ALT_MMU_FTR_SECTION_END_IFCLR(MMU_FTR_TYPE_RADIX)
+#else
+ bl do_page_fault
+#endif
+ b interrupt_return_srr
+
+1: bl do_break
+ /*
+ * do_break() may have changed the NV GPRS while handling a breakpoint.
+ * If so, we need to restore them with their updated values.
+ */
+ REST_NVGPRS(r1)
+ b interrupt_return_srr
+
+
+/**
+ * Interrupt 0x380 - Data Segment Interrupt (DSLB).
+ * This is a synchronous interrupt in response to an MMU fault missing SLB
+ * entry for HPT, or an address outside RPT translation range.
+ *
+ * Handling:
+ * - HPT:
+ * This refills the SLB, or reports an access fault similarly to a bad page
+ * fault. When coming from user-mode, the SLB handler may access any kernel
+ * data, though it may itself take a DSLB. When coming from kernel mode,
+ * recursive faults must be avoided so access is restricted to the kernel
+ * image text/data, kernel stack, and any data allocated below
+ * ppc64_bolted_size (first segment). The kernel handler must avoid stomping
+ * on user-handler data structures.
+ *
+ * KVM: Same as 0x300, DSLB must test for KVM guest.
+ */
+INT_DEFINE_BEGIN(data_access_slb)
+ IVEC=0x380
+ IDAR=1
+ IKVM_REAL=1
+INT_DEFINE_END(data_access_slb)
+
+EXC_REAL_BEGIN(data_access_slb, 0x380, 0x80)
+ GEN_INT_ENTRY data_access_slb, virt=0
+EXC_REAL_END(data_access_slb, 0x380, 0x80)
+EXC_VIRT_BEGIN(data_access_slb, 0x4380, 0x80)
+ GEN_INT_ENTRY data_access_slb, virt=1
+EXC_VIRT_END(data_access_slb, 0x4380, 0x80)
+EXC_COMMON_BEGIN(data_access_slb_common)
+ GEN_COMMON data_access_slb
+#ifdef CONFIG_PPC_64S_HASH_MMU
+BEGIN_MMU_FTR_SECTION
+ /* HPT case, do SLB fault */
+ addi r3,r1,STACK_FRAME_OVERHEAD
+ bl do_slb_fault
+ cmpdi r3,0
+ bne- 1f
+ b fast_interrupt_return_srr
+1: /* Error case */
+MMU_FTR_SECTION_ELSE
+ /* Radix case, access is outside page table range */
+ li r3,-EFAULT
+ALT_MMU_FTR_SECTION_END_IFCLR(MMU_FTR_TYPE_RADIX)
+#else
+ li r3,-EFAULT
+#endif
+ std r3,RESULT(r1)
+ addi r3,r1,STACK_FRAME_OVERHEAD
+ bl do_bad_segment_interrupt
+ b interrupt_return_srr
+
+
+/**
+ * Interrupt 0x400 - Instruction Storage Interrupt (ISI).
+ * This is a synchronous interrupt in response to an MMU fault due to an
+ * instruction fetch.
+ *
+ * Handling:
+ * Similar to DSI, though in response to fetch. The faulting address is found
+ * in SRR0 (rather than DAR), and status in SRR1 (rather than DSISR).
+ */
+INT_DEFINE_BEGIN(instruction_access)
+ IVEC=0x400
+ IISIDE=1
+ IDAR=1
+ IDSISR=1
+#ifdef CONFIG_KVM_BOOK3S_PR_POSSIBLE
+ IKVM_REAL=1
+#endif
+INT_DEFINE_END(instruction_access)
+
+EXC_REAL_BEGIN(instruction_access, 0x400, 0x80)
+ GEN_INT_ENTRY instruction_access, virt=0
+EXC_REAL_END(instruction_access, 0x400, 0x80)
+EXC_VIRT_BEGIN(instruction_access, 0x4400, 0x80)
+ GEN_INT_ENTRY instruction_access, virt=1
+EXC_VIRT_END(instruction_access, 0x4400, 0x80)
+EXC_COMMON_BEGIN(instruction_access_common)
+ GEN_COMMON instruction_access
+ addi r3,r1,STACK_FRAME_OVERHEAD
+#ifdef CONFIG_PPC_64S_HASH_MMU
+BEGIN_MMU_FTR_SECTION
+ bl do_hash_fault
+MMU_FTR_SECTION_ELSE
+ bl do_page_fault
+ALT_MMU_FTR_SECTION_END_IFCLR(MMU_FTR_TYPE_RADIX)
+#else
+ bl do_page_fault
+#endif
+ b interrupt_return_srr
+
+
+/**
+ * Interrupt 0x480 - Instruction Segment Interrupt (ISLB).
+ * This is a synchronous interrupt in response to an MMU fault due to an
+ * instruction fetch.
+ *
+ * Handling:
+ * Similar to DSLB, though in response to fetch. The faulting address is found
+ * in SRR0 (rather than DAR).
+ */
+INT_DEFINE_BEGIN(instruction_access_slb)
+ IVEC=0x480
+ IISIDE=1
+ IDAR=1
+#ifdef CONFIG_KVM_BOOK3S_PR_POSSIBLE
+ IKVM_REAL=1
+#endif
+INT_DEFINE_END(instruction_access_slb)
+
+EXC_REAL_BEGIN(instruction_access_slb, 0x480, 0x80)
+ GEN_INT_ENTRY instruction_access_slb, virt=0
+EXC_REAL_END(instruction_access_slb, 0x480, 0x80)
+EXC_VIRT_BEGIN(instruction_access_slb, 0x4480, 0x80)
+ GEN_INT_ENTRY instruction_access_slb, virt=1
+EXC_VIRT_END(instruction_access_slb, 0x4480, 0x80)
+EXC_COMMON_BEGIN(instruction_access_slb_common)
+ GEN_COMMON instruction_access_slb
+#ifdef CONFIG_PPC_64S_HASH_MMU
+BEGIN_MMU_FTR_SECTION
+ /* HPT case, do SLB fault */
+ addi r3,r1,STACK_FRAME_OVERHEAD
+ bl do_slb_fault
+ cmpdi r3,0
+ bne- 1f
+ b fast_interrupt_return_srr
+1: /* Error case */
+MMU_FTR_SECTION_ELSE
+ /* Radix case, access is outside page table range */
+ li r3,-EFAULT
+ALT_MMU_FTR_SECTION_END_IFCLR(MMU_FTR_TYPE_RADIX)
+#else
+ li r3,-EFAULT
+#endif
+ std r3,RESULT(r1)
+ addi r3,r1,STACK_FRAME_OVERHEAD
+ bl do_bad_segment_interrupt
+ b interrupt_return_srr
+
+
+/**
+ * Interrupt 0x500 - External Interrupt.
+ * This is an asynchronous maskable interrupt in response to an "external
+ * exception" from the interrupt controller or hypervisor (e.g., device
+ * interrupt). It is maskable in hardware by clearing MSR[EE], and
+ * soft-maskable with IRQS_DISABLED mask (i.e., local_irq_disable()).
+ *
+ * When running in HV mode, Linux sets up the LPCR[LPES] bit such that
+ * interrupts are delivered with HSRR registers, guests use SRRs, which
+ * reqiures IHSRR_IF_HVMODE.
+ *
+ * On bare metal POWER9 and later, Linux sets the LPCR[HVICE] bit such that
+ * external interrupts are delivered as Hypervisor Virtualization Interrupts
+ * rather than External Interrupts.
+ *
+ * Handling:
+ * This calls into Linux IRQ handler. NVGPRs are not saved to reduce overhead,
+ * because registers at the time of the interrupt are not so important as it is
+ * asynchronous.
+ *
+ * If soft masked, the masked handler will note the pending interrupt for
+ * replay, and clear MSR[EE] in the interrupted context.
+ *
+ * CFAR is not required because this is an asynchronous interrupt that in
+ * general won't have much bearing on the state of the CPU, with the possible
+ * exception of crash/debug IPIs, but those are generally moving to use SRESET
+ * IPIs. Unless this is an HV interrupt and KVM HV is possible, in which case
+ * it may be exiting the guest and need CFAR to be saved.
+ */
+INT_DEFINE_BEGIN(hardware_interrupt)
+ IVEC=0x500
+ IHSRR_IF_HVMODE=1
+ IMASK=IRQS_DISABLED
+ IKVM_REAL=1
+ IKVM_VIRT=1
+ ICFAR=0
+#ifdef CONFIG_KVM_BOOK3S_HV_POSSIBLE
+ ICFAR_IF_HVMODE=1
+#endif
+INT_DEFINE_END(hardware_interrupt)
+
+EXC_REAL_BEGIN(hardware_interrupt, 0x500, 0x100)
+ GEN_INT_ENTRY hardware_interrupt, virt=0
+EXC_REAL_END(hardware_interrupt, 0x500, 0x100)
+EXC_VIRT_BEGIN(hardware_interrupt, 0x4500, 0x100)
+ GEN_INT_ENTRY hardware_interrupt, virt=1
+EXC_VIRT_END(hardware_interrupt, 0x4500, 0x100)
+EXC_COMMON_BEGIN(hardware_interrupt_common)
+ GEN_COMMON hardware_interrupt
+ addi r3,r1,STACK_FRAME_OVERHEAD
+ bl do_IRQ
+ BEGIN_FTR_SECTION
+ b interrupt_return_hsrr
+ FTR_SECTION_ELSE
+ b interrupt_return_srr
+ ALT_FTR_SECTION_END_IFSET(CPU_FTR_HVMODE | CPU_FTR_ARCH_206)
+
+
+/**
+ * Interrupt 0x600 - Alignment Interrupt
+ * This is a synchronous interrupt in response to data alignment fault.
+ */
+INT_DEFINE_BEGIN(alignment)
+ IVEC=0x600
+ IDAR=1
+ IDSISR=1
+#ifdef CONFIG_KVM_BOOK3S_PR_POSSIBLE
+ IKVM_REAL=1
+#endif
+INT_DEFINE_END(alignment)
+
+EXC_REAL_BEGIN(alignment, 0x600, 0x100)
+ GEN_INT_ENTRY alignment, virt=0
+EXC_REAL_END(alignment, 0x600, 0x100)
+EXC_VIRT_BEGIN(alignment, 0x4600, 0x100)
+ GEN_INT_ENTRY alignment, virt=1
+EXC_VIRT_END(alignment, 0x4600, 0x100)
+EXC_COMMON_BEGIN(alignment_common)
+ GEN_COMMON alignment
+ addi r3,r1,STACK_FRAME_OVERHEAD
+ bl alignment_exception
+ REST_NVGPRS(r1) /* instruction emulation may change GPRs */
+ b interrupt_return_srr
+
+
+/**
+ * Interrupt 0x700 - Program Interrupt (program check).
+ * This is a synchronous interrupt in response to various instruction faults:
+ * traps, privilege errors, TM errors, floating point exceptions.
+ *
+ * Handling:
+ * This interrupt may use the "emergency stack" in some cases when being taken
+ * from kernel context, which complicates handling.
+ */
+INT_DEFINE_BEGIN(program_check)
+ IVEC=0x700
+#ifdef CONFIG_KVM_BOOK3S_PR_POSSIBLE
+ IKVM_REAL=1
+#endif
+INT_DEFINE_END(program_check)
+
+EXC_REAL_BEGIN(program_check, 0x700, 0x100)
+ EARLY_BOOT_FIXUP
+ GEN_INT_ENTRY program_check, virt=0
+EXC_REAL_END(program_check, 0x700, 0x100)
+EXC_VIRT_BEGIN(program_check, 0x4700, 0x100)
+ GEN_INT_ENTRY program_check, virt=1
+EXC_VIRT_END(program_check, 0x4700, 0x100)
+EXC_COMMON_BEGIN(program_check_common)
+ __GEN_COMMON_ENTRY program_check
+
+ /*
+ * It's possible to receive a TM Bad Thing type program check with
+ * userspace register values (in particular r1), but with SRR1 reporting
+ * that we came from the kernel. Normally that would confuse the bad
+ * stack logic, and we would report a bad kernel stack pointer. Instead
+ * we switch to the emergency stack if we're taking a TM Bad Thing from
+ * the kernel.
+ */
+
+ andi. r10,r12,MSR_PR
+ bne .Lnormal_stack /* If userspace, go normal path */
+
+ andis. r10,r12,(SRR1_PROGTM)@h
+ bne .Lemergency_stack /* If TM, emergency */
+
+ cmpdi r1,-INT_FRAME_SIZE /* check if r1 is in userspace */
+ blt .Lnormal_stack /* normal path if not */
+
+ /* Use the emergency stack */
+.Lemergency_stack:
+ andi. r10,r12,MSR_PR /* Set CR0 correctly for label */
+ /* 3 in EXCEPTION_PROLOG_COMMON */
+ mr r10,r1 /* Save r1 */
+ ld r1,PACAEMERGSP(r13) /* Use emergency stack */
+ subi r1,r1,INT_FRAME_SIZE /* alloc stack frame */
+ __ISTACK(program_check)=0
+ __GEN_COMMON_BODY program_check
+ b .Ldo_program_check
+
+.Lnormal_stack:
+ __ISTACK(program_check)=1
+ __GEN_COMMON_BODY program_check
+
+.Ldo_program_check:
+ addi r3,r1,STACK_FRAME_OVERHEAD
+ bl program_check_exception
+ REST_NVGPRS(r1) /* instruction emulation may change GPRs */
+ b interrupt_return_srr
+
+
+/*
+ * Interrupt 0x800 - Floating-Point Unavailable Interrupt.
+ * This is a synchronous interrupt in response to executing an fp instruction
+ * with MSR[FP]=0.
+ *
+ * Handling:
+ * This will load FP registers and enable the FP bit if coming from userspace,
+ * otherwise report a bad kernel use of FP.
+ */
+INT_DEFINE_BEGIN(fp_unavailable)
+ IVEC=0x800
+#ifdef CONFIG_KVM_BOOK3S_PR_POSSIBLE
+ IKVM_REAL=1
+#endif
+INT_DEFINE_END(fp_unavailable)
+
+EXC_REAL_BEGIN(fp_unavailable, 0x800, 0x100)
+ GEN_INT_ENTRY fp_unavailable, virt=0
+EXC_REAL_END(fp_unavailable, 0x800, 0x100)
+EXC_VIRT_BEGIN(fp_unavailable, 0x4800, 0x100)
+ GEN_INT_ENTRY fp_unavailable, virt=1
+EXC_VIRT_END(fp_unavailable, 0x4800, 0x100)
+EXC_COMMON_BEGIN(fp_unavailable_common)
+ GEN_COMMON fp_unavailable
+ bne 1f /* if from user, just load it up */
+ addi r3,r1,STACK_FRAME_OVERHEAD
+ bl kernel_fp_unavailable_exception
+0: trap
+ EMIT_BUG_ENTRY 0b, __FILE__, __LINE__, 0
+1:
+#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
+BEGIN_FTR_SECTION
+ /* Test if 2 TM state bits are zero. If non-zero (ie. userspace was in
+ * transaction), go do TM stuff
+ */
+ rldicl. r0, r12, (64-MSR_TS_LG), (64-2)
+ bne- 2f
+END_FTR_SECTION_IFSET(CPU_FTR_TM)
+#endif
+ bl load_up_fpu
+ b fast_interrupt_return_srr
+#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
+2: /* User process was in a transaction */
+ addi r3,r1,STACK_FRAME_OVERHEAD
+ bl fp_unavailable_tm
+ b interrupt_return_srr
+#endif
+
+
+/**
+ * Interrupt 0x900 - Decrementer Interrupt.
+ * This is an asynchronous interrupt in response to a decrementer exception
+ * (e.g., DEC has wrapped below zero). It is maskable in hardware by clearing
+ * MSR[EE], and soft-maskable with IRQS_DISABLED mask (i.e.,
+ * local_irq_disable()).
+ *
+ * Handling:
+ * This calls into Linux timer handler. NVGPRs are not saved (see 0x500).
+ *
+ * If soft masked, the masked handler will note the pending interrupt for
+ * replay, and bump the decrementer to a high value, leaving MSR[EE] enabled
+ * in the interrupted context.
+ * If PPC_WATCHDOG is configured, the soft masked handler will actually set
+ * things back up to run soft_nmi_interrupt as a regular interrupt handler
+ * on the emergency stack.
+ *
+ * CFAR is not required because this is asynchronous (see hardware_interrupt).
+ * A watchdog interrupt may like to have CFAR, but usually the interesting
+ * branch is long gone by that point (e.g., infinite loop).
+ */
+INT_DEFINE_BEGIN(decrementer)
+ IVEC=0x900
+ IMASK=IRQS_DISABLED
+#ifdef CONFIG_KVM_BOOK3S_PR_POSSIBLE
+ IKVM_REAL=1
+#endif
+ ICFAR=0
+INT_DEFINE_END(decrementer)
+
+EXC_REAL_BEGIN(decrementer, 0x900, 0x80)
+ GEN_INT_ENTRY decrementer, virt=0
+EXC_REAL_END(decrementer, 0x900, 0x80)
+EXC_VIRT_BEGIN(decrementer, 0x4900, 0x80)
+ GEN_INT_ENTRY decrementer, virt=1
+EXC_VIRT_END(decrementer, 0x4900, 0x80)
+EXC_COMMON_BEGIN(decrementer_common)
+ GEN_COMMON decrementer
+ addi r3,r1,STACK_FRAME_OVERHEAD
+ bl timer_interrupt
+ b interrupt_return_srr
+
+
+/**
+ * Interrupt 0x980 - Hypervisor Decrementer Interrupt.
+ * This is an asynchronous interrupt, similar to 0x900 but for the HDEC
+ * register.
+ *
+ * Handling:
+ * Linux does not use this outside KVM where it's used to keep a host timer
+ * while the guest is given control of DEC. It should normally be caught by
+ * the KVM test and routed there.
+ */
+INT_DEFINE_BEGIN(hdecrementer)
+ IVEC=0x980
+ IHSRR=1
+ ISTACK=0
+ IKVM_REAL=1
+ IKVM_VIRT=1
+INT_DEFINE_END(hdecrementer)
+
+EXC_REAL_BEGIN(hdecrementer, 0x980, 0x80)
+ GEN_INT_ENTRY hdecrementer, virt=0
+EXC_REAL_END(hdecrementer, 0x980, 0x80)
+EXC_VIRT_BEGIN(hdecrementer, 0x4980, 0x80)
+ GEN_INT_ENTRY hdecrementer, virt=1
+EXC_VIRT_END(hdecrementer, 0x4980, 0x80)
+EXC_COMMON_BEGIN(hdecrementer_common)
+ __GEN_COMMON_ENTRY hdecrementer
+ /*
+ * Hypervisor decrementer interrupts not caught by the KVM test
+ * shouldn't occur but are sometimes left pending on exit from a KVM
+ * guest. We don't need to do anything to clear them, as they are
+ * edge-triggered.
+ *
+ * Be careful to avoid touching the kernel stack.
+ */
+ li r10,0
+ stb r10,PACAHSRR_VALID(r13)
+ ld r10,PACA_EXGEN+EX_CTR(r13)
+ mtctr r10
+ mtcrf 0x80,r9
+ ld r9,PACA_EXGEN+EX_R9(r13)
+ ld r10,PACA_EXGEN+EX_R10(r13)
+ ld r11,PACA_EXGEN+EX_R11(r13)
+ ld r12,PACA_EXGEN+EX_R12(r13)
+ ld r13,PACA_EXGEN+EX_R13(r13)
+ HRFI_TO_KERNEL
+
+
+/**
+ * Interrupt 0xa00 - Directed Privileged Doorbell Interrupt.
+ * This is an asynchronous interrupt in response to a msgsndp doorbell.
+ * It is maskable in hardware by clearing MSR[EE], and soft-maskable with
+ * IRQS_DISABLED mask (i.e., local_irq_disable()).
+ *
+ * Handling:
+ * Guests may use this for IPIs between threads in a core if the
+ * hypervisor supports it. NVGPRS are not saved (see 0x500).
+ *
+ * If soft masked, the masked handler will note the pending interrupt for
+ * replay, leaving MSR[EE] enabled in the interrupted context because the
+ * doorbells are edge triggered.
+ *
+ * CFAR is not required, similarly to hardware_interrupt.
+ */
+INT_DEFINE_BEGIN(doorbell_super)
+ IVEC=0xa00
+ IMASK=IRQS_DISABLED
+#ifdef CONFIG_KVM_BOOK3S_PR_POSSIBLE
+ IKVM_REAL=1
+#endif
+ ICFAR=0
+INT_DEFINE_END(doorbell_super)
+
+EXC_REAL_BEGIN(doorbell_super, 0xa00, 0x100)
+ GEN_INT_ENTRY doorbell_super, virt=0
+EXC_REAL_END(doorbell_super, 0xa00, 0x100)
+EXC_VIRT_BEGIN(doorbell_super, 0x4a00, 0x100)
+ GEN_INT_ENTRY doorbell_super, virt=1
+EXC_VIRT_END(doorbell_super, 0x4a00, 0x100)
+EXC_COMMON_BEGIN(doorbell_super_common)
+ GEN_COMMON doorbell_super
+ addi r3,r1,STACK_FRAME_OVERHEAD
+#ifdef CONFIG_PPC_DOORBELL
+ bl doorbell_exception
+#else
+ bl unknown_async_exception
+#endif
+ b interrupt_return_srr
+
+
+EXC_REAL_NONE(0xb00, 0x100)
+EXC_VIRT_NONE(0x4b00, 0x100)
+
+/**
+ * Interrupt 0xc00 - System Call Interrupt (syscall, hcall).
+ * This is a synchronous interrupt invoked with the "sc" instruction. The
+ * system call is invoked with "sc 0" and does not alter the HV bit, so it
+ * is directed to the currently running OS. The hypercall is invoked with
+ * "sc 1" and it sets HV=1, so it elevates to hypervisor.
+ *
+ * In HPT, sc 1 always goes to 0xc00 real mode. In RADIX, sc 1 can go to
+ * 0x4c00 virtual mode.
+ *
+ * Handling:
+ * If the KVM test fires then it was due to a hypercall and is accordingly
+ * routed to KVM. Otherwise this executes a normal Linux system call.
+ *
+ * Call convention:
+ *
+ * syscall and hypercalls register conventions are documented in
+ * Documentation/powerpc/syscall64-abi.rst and
+ * Documentation/powerpc/papr_hcalls.rst respectively.
+ *
+ * The intersection of volatile registers that don't contain possible
+ * inputs is: cr0, xer, ctr. We may use these as scratch regs upon entry
+ * without saving, though xer is not a good idea to use, as hardware may
+ * interpret some bits so it may be costly to change them.
+ */
+INT_DEFINE_BEGIN(system_call)
+ IVEC=0xc00
+ IKVM_REAL=1
+ IKVM_VIRT=1
+ ICFAR=0
+INT_DEFINE_END(system_call)
+
+.macro SYSTEM_CALL virt
+#ifdef CONFIG_KVM_BOOK3S_64_HANDLER
+ /*
+ * There is a little bit of juggling to get syscall and hcall
+ * working well. Save r13 in ctr to avoid using SPRG scratch
+ * register.
+ *
+ * Userspace syscalls have already saved the PPR, hcalls must save
+ * it before setting HMT_MEDIUM.
+ */
+ mtctr r13
+ GET_PACA(r13)
+ std r10,PACA_EXGEN+EX_R10(r13)
+ INTERRUPT_TO_KERNEL
+ KVMTEST system_call kvm_hcall /* uses r10, branch to kvm_hcall */
+ mfctr r9
+#else
+ mr r9,r13
+ GET_PACA(r13)
+ INTERRUPT_TO_KERNEL
+#endif
+
+#ifdef CONFIG_PPC_FAST_ENDIAN_SWITCH
+BEGIN_FTR_SECTION
+ cmpdi r0,0x1ebe
+ beq- 1f
+END_FTR_SECTION_IFSET(CPU_FTR_REAL_LE)
+#endif
+
+ /* We reach here with PACA in r13, r13 in r9. */
+ mfspr r11,SPRN_SRR0
+ mfspr r12,SPRN_SRR1
+
+ HMT_MEDIUM
+
+ .if ! \virt
+ __LOAD_HANDLER(r10, system_call_common_real, real_vectors)
+ mtctr r10
+ bctr
+ .else
+#ifdef CONFIG_RELOCATABLE
+ __LOAD_HANDLER(r10, system_call_common, virt_vectors)
+ mtctr r10
+ bctr
+#else
+ b system_call_common
+#endif
+ .endif
+
+#ifdef CONFIG_PPC_FAST_ENDIAN_SWITCH
+ /* Fast LE/BE switch system call */
+1: mfspr r12,SPRN_SRR1
+ xori r12,r12,MSR_LE
+ mtspr SPRN_SRR1,r12
+ mr r13,r9
+ RFI_TO_USER /* return to userspace */
+ b . /* prevent speculative execution */
+#endif
+.endm
+
+EXC_REAL_BEGIN(system_call, 0xc00, 0x100)
+ SYSTEM_CALL 0
+EXC_REAL_END(system_call, 0xc00, 0x100)
+EXC_VIRT_BEGIN(system_call, 0x4c00, 0x100)
+ SYSTEM_CALL 1
+EXC_VIRT_END(system_call, 0x4c00, 0x100)
+
+#ifdef CONFIG_KVM_BOOK3S_64_HANDLER
+TRAMP_REAL_BEGIN(kvm_hcall)
+ std r9,PACA_EXGEN+EX_R9(r13)
+ std r11,PACA_EXGEN+EX_R11(r13)
+ std r12,PACA_EXGEN+EX_R12(r13)
+ mfcr r9
+ mfctr r10
+ std r10,PACA_EXGEN+EX_R13(r13)
+ li r10,0
+ std r10,PACA_EXGEN+EX_CFAR(r13)
+ std r10,PACA_EXGEN+EX_CTR(r13)
+ /*
+ * Save the PPR (on systems that support it) before changing to
+ * HMT_MEDIUM. That allows the KVM code to save that value into the
+ * guest state (it is the guest's PPR value).
+ */
+BEGIN_FTR_SECTION
+ mfspr r10,SPRN_PPR
+ std r10,PACA_EXGEN+EX_PPR(r13)
+END_FTR_SECTION_IFSET(CPU_FTR_HAS_PPR)
+
+ HMT_MEDIUM
+
+#ifdef CONFIG_RELOCATABLE
+ /*
+ * Requires __LOAD_FAR_HANDLER beause kvmppc_hcall lives
+ * outside the head section.
+ */
+ __LOAD_FAR_HANDLER(r10, kvmppc_hcall, real_trampolines)
+ mtctr r10
+ bctr
+#else
+ b kvmppc_hcall
+#endif
+#endif
+
+/**
+ * Interrupt 0xd00 - Trace Interrupt.
+ * This is a synchronous interrupt in response to instruction step or
+ * breakpoint faults.
+ */
+INT_DEFINE_BEGIN(single_step)
+ IVEC=0xd00
+#ifdef CONFIG_KVM_BOOK3S_PR_POSSIBLE
+ IKVM_REAL=1
+#endif
+INT_DEFINE_END(single_step)
+
+EXC_REAL_BEGIN(single_step, 0xd00, 0x100)
+ GEN_INT_ENTRY single_step, virt=0
+EXC_REAL_END(single_step, 0xd00, 0x100)
+EXC_VIRT_BEGIN(single_step, 0x4d00, 0x100)
+ GEN_INT_ENTRY single_step, virt=1
+EXC_VIRT_END(single_step, 0x4d00, 0x100)
+EXC_COMMON_BEGIN(single_step_common)
+ GEN_COMMON single_step
+ addi r3,r1,STACK_FRAME_OVERHEAD
+ bl single_step_exception
+ b interrupt_return_srr
+
+
+/**
+ * Interrupt 0xe00 - Hypervisor Data Storage Interrupt (HDSI).
+ * This is a synchronous interrupt in response to an MMU fault caused by a
+ * guest data access.
+ *
+ * Handling:
+ * This should always get routed to KVM. In radix MMU mode, this is caused
+ * by a guest nested radix access that can't be performed due to the
+ * partition scope page table. In hash mode, this can be caused by guests
+ * running with translation disabled (virtual real mode) or with VPM enabled.
+ * KVM will update the page table structures or disallow the access.
+ */
+INT_DEFINE_BEGIN(h_data_storage)
+ IVEC=0xe00
+ IHSRR=1
+ IDAR=1
+ IDSISR=1
+ IKVM_REAL=1
+ IKVM_VIRT=1
+INT_DEFINE_END(h_data_storage)
+
+EXC_REAL_BEGIN(h_data_storage, 0xe00, 0x20)
+ GEN_INT_ENTRY h_data_storage, virt=0, ool=1
+EXC_REAL_END(h_data_storage, 0xe00, 0x20)
+EXC_VIRT_BEGIN(h_data_storage, 0x4e00, 0x20)
+ GEN_INT_ENTRY h_data_storage, virt=1, ool=1
+EXC_VIRT_END(h_data_storage, 0x4e00, 0x20)
+EXC_COMMON_BEGIN(h_data_storage_common)
+ GEN_COMMON h_data_storage
+ addi r3,r1,STACK_FRAME_OVERHEAD
+BEGIN_MMU_FTR_SECTION
+ bl do_bad_page_fault_segv
+MMU_FTR_SECTION_ELSE
+ bl unknown_exception
+ALT_MMU_FTR_SECTION_END_IFSET(MMU_FTR_TYPE_RADIX)
+ b interrupt_return_hsrr
+
+
+/**
+ * Interrupt 0xe20 - Hypervisor Instruction Storage Interrupt (HISI).
+ * This is a synchronous interrupt in response to an MMU fault caused by a
+ * guest instruction fetch, similar to HDSI.
+ */
+INT_DEFINE_BEGIN(h_instr_storage)
+ IVEC=0xe20
+ IHSRR=1
+ IKVM_REAL=1
+ IKVM_VIRT=1
+INT_DEFINE_END(h_instr_storage)
+
+EXC_REAL_BEGIN(h_instr_storage, 0xe20, 0x20)
+ GEN_INT_ENTRY h_instr_storage, virt=0, ool=1
+EXC_REAL_END(h_instr_storage, 0xe20, 0x20)
+EXC_VIRT_BEGIN(h_instr_storage, 0x4e20, 0x20)
+ GEN_INT_ENTRY h_instr_storage, virt=1, ool=1
+EXC_VIRT_END(h_instr_storage, 0x4e20, 0x20)
+EXC_COMMON_BEGIN(h_instr_storage_common)
+ GEN_COMMON h_instr_storage
+ addi r3,r1,STACK_FRAME_OVERHEAD
+ bl unknown_exception
+ b interrupt_return_hsrr
+
+
+/**
+ * Interrupt 0xe40 - Hypervisor Emulation Assistance Interrupt.
+ */
+INT_DEFINE_BEGIN(emulation_assist)
+ IVEC=0xe40
+ IHSRR=1
+ IKVM_REAL=1
+ IKVM_VIRT=1
+INT_DEFINE_END(emulation_assist)
+
+EXC_REAL_BEGIN(emulation_assist, 0xe40, 0x20)
+ GEN_INT_ENTRY emulation_assist, virt=0, ool=1
+EXC_REAL_END(emulation_assist, 0xe40, 0x20)
+EXC_VIRT_BEGIN(emulation_assist, 0x4e40, 0x20)
+ GEN_INT_ENTRY emulation_assist, virt=1, ool=1
+EXC_VIRT_END(emulation_assist, 0x4e40, 0x20)
+EXC_COMMON_BEGIN(emulation_assist_common)
+ GEN_COMMON emulation_assist
+ addi r3,r1,STACK_FRAME_OVERHEAD
+ bl emulation_assist_interrupt
+ REST_NVGPRS(r1) /* instruction emulation may change GPRs */
+ b interrupt_return_hsrr
+
+
+/**
+ * Interrupt 0xe60 - Hypervisor Maintenance Interrupt (HMI).
+ * This is an asynchronous interrupt caused by a Hypervisor Maintenance
+ * Exception. It is always taken in real mode but uses HSRR registers
+ * unlike SRESET and MCE.
+ *
+ * It is maskable in hardware by clearing MSR[EE], and partially soft-maskable
+ * with IRQS_DISABLED mask (i.e., local_irq_disable()).
+ *
+ * Handling:
+ * This is a special case, this is handled similarly to machine checks, with an
+ * initial real mode handler that is not soft-masked, which attempts to fix the
+ * problem. Then a regular handler which is soft-maskable and reports the
+ * problem.
+ *
+ * The emergency stack is used for the early real mode handler.
+ *
+ * XXX: unclear why MCE and HMI schemes could not be made common, e.g.,
+ * either use soft-masking for the MCE, or use irq_work for the HMI.
+ *
+ * KVM:
+ * Unlike MCE, this calls into KVM without calling the real mode handler
+ * first.
+ */
+INT_DEFINE_BEGIN(hmi_exception_early)
+ IVEC=0xe60
+ IHSRR=1
+ IREALMODE_COMMON=1
+ ISTACK=0
+ IKUAP=0 /* We don't touch AMR here, we never go to virtual mode */
+ IKVM_REAL=1
+INT_DEFINE_END(hmi_exception_early)
+
+INT_DEFINE_BEGIN(hmi_exception)
+ IVEC=0xe60
+ IHSRR=1
+ IMASK=IRQS_DISABLED
+ IKVM_REAL=1
+INT_DEFINE_END(hmi_exception)
+
+EXC_REAL_BEGIN(hmi_exception, 0xe60, 0x20)
+ GEN_INT_ENTRY hmi_exception_early, virt=0, ool=1
+EXC_REAL_END(hmi_exception, 0xe60, 0x20)
+EXC_VIRT_NONE(0x4e60, 0x20)
+
+EXC_COMMON_BEGIN(hmi_exception_early_common)
+ __GEN_REALMODE_COMMON_ENTRY hmi_exception_early
+
+ mr r10,r1 /* Save r1 */
+ ld r1,PACAEMERGSP(r13) /* Use emergency stack for realmode */
+ subi r1,r1,INT_FRAME_SIZE /* alloc stack frame */
+
+ __GEN_COMMON_BODY hmi_exception_early
+
+ addi r3,r1,STACK_FRAME_OVERHEAD
+ bl hmi_exception_realmode
+ cmpdi cr0,r3,0
+ bne 1f
+
+ EXCEPTION_RESTORE_REGS hsrr=1
+ HRFI_TO_USER_OR_KERNEL
+
+1:
+ /*
+ * Go to virtual mode and pull the HMI event information from
+ * firmware.
+ */
+ EXCEPTION_RESTORE_REGS hsrr=1
+ GEN_INT_ENTRY hmi_exception, virt=0
+
+EXC_COMMON_BEGIN(hmi_exception_common)
+ GEN_COMMON hmi_exception
+ addi r3,r1,STACK_FRAME_OVERHEAD
+ bl handle_hmi_exception
+ b interrupt_return_hsrr
+
+
+/**
+ * Interrupt 0xe80 - Directed Hypervisor Doorbell Interrupt.
+ * This is an asynchronous interrupt in response to a msgsnd doorbell.
+ * Similar to the 0xa00 doorbell but for host rather than guest.
+ *
+ * CFAR is not required (similar to doorbell_interrupt), unless KVM HV
+ * is enabled, in which case it may be a guest exit. Most PowerNV kernels
+ * include KVM support so it would be nice if this could be dynamically
+ * patched out if KVM was not currently running any guests.
+ */
+INT_DEFINE_BEGIN(h_doorbell)
+ IVEC=0xe80
+ IHSRR=1
+ IMASK=IRQS_DISABLED
+ IKVM_REAL=1
+ IKVM_VIRT=1
+#ifndef CONFIG_KVM_BOOK3S_HV_POSSIBLE
+ ICFAR=0
+#endif
+INT_DEFINE_END(h_doorbell)
+
+EXC_REAL_BEGIN(h_doorbell, 0xe80, 0x20)
+ GEN_INT_ENTRY h_doorbell, virt=0, ool=1
+EXC_REAL_END(h_doorbell, 0xe80, 0x20)
+EXC_VIRT_BEGIN(h_doorbell, 0x4e80, 0x20)
+ GEN_INT_ENTRY h_doorbell, virt=1, ool=1
+EXC_VIRT_END(h_doorbell, 0x4e80, 0x20)
+EXC_COMMON_BEGIN(h_doorbell_common)
+ GEN_COMMON h_doorbell
+ addi r3,r1,STACK_FRAME_OVERHEAD
+#ifdef CONFIG_PPC_DOORBELL
+ bl doorbell_exception
+#else
+ bl unknown_async_exception
+#endif
+ b interrupt_return_hsrr
+
+
+/**
+ * Interrupt 0xea0 - Hypervisor Virtualization Interrupt.
+ * This is an asynchronous interrupt in response to an "external exception".
+ * Similar to 0x500 but for host only.
+ *
+ * Like h_doorbell, CFAR is only required for KVM HV because this can be
+ * a guest exit.
+ */
+INT_DEFINE_BEGIN(h_virt_irq)
+ IVEC=0xea0
+ IHSRR=1
+ IMASK=IRQS_DISABLED
+ IKVM_REAL=1
+ IKVM_VIRT=1
+#ifndef CONFIG_KVM_BOOK3S_HV_POSSIBLE
+ ICFAR=0
+#endif
+INT_DEFINE_END(h_virt_irq)
+
+EXC_REAL_BEGIN(h_virt_irq, 0xea0, 0x20)
+ GEN_INT_ENTRY h_virt_irq, virt=0, ool=1
+EXC_REAL_END(h_virt_irq, 0xea0, 0x20)
+EXC_VIRT_BEGIN(h_virt_irq, 0x4ea0, 0x20)
+ GEN_INT_ENTRY h_virt_irq, virt=1, ool=1
+EXC_VIRT_END(h_virt_irq, 0x4ea0, 0x20)
+EXC_COMMON_BEGIN(h_virt_irq_common)
+ GEN_COMMON h_virt_irq
+ addi r3,r1,STACK_FRAME_OVERHEAD
+ bl do_IRQ
+ b interrupt_return_hsrr
+
+
+EXC_REAL_NONE(0xec0, 0x20)
+EXC_VIRT_NONE(0x4ec0, 0x20)
+EXC_REAL_NONE(0xee0, 0x20)
+EXC_VIRT_NONE(0x4ee0, 0x20)
+
+
+/*
+ * Interrupt 0xf00 - Performance Monitor Interrupt (PMI, PMU).
+ * This is an asynchronous interrupt in response to a PMU exception.
+ * It is maskable in hardware by clearing MSR[EE], and soft-maskable with
+ * IRQS_PMI_DISABLED mask (NOTE: NOT local_irq_disable()).
+ *
+ * Handling:
+ * This calls into the perf subsystem.
+ *
+ * Like the watchdog soft-nmi, it appears an NMI interrupt to Linux, in that it
+ * runs under local_irq_disable. However it may be soft-masked in
+ * powerpc-specific code.
+ *
+ * If soft masked, the masked handler will note the pending interrupt for
+ * replay, and clear MSR[EE] in the interrupted context.
+ *
+ * CFAR is not used by perf interrupts so not required.
+ */
+INT_DEFINE_BEGIN(performance_monitor)
+ IVEC=0xf00
+ IMASK=IRQS_PMI_DISABLED
+#ifdef CONFIG_KVM_BOOK3S_PR_POSSIBLE
+ IKVM_REAL=1
+#endif
+ ICFAR=0
+INT_DEFINE_END(performance_monitor)
+
+EXC_REAL_BEGIN(performance_monitor, 0xf00, 0x20)
+ GEN_INT_ENTRY performance_monitor, virt=0, ool=1
+EXC_REAL_END(performance_monitor, 0xf00, 0x20)
+EXC_VIRT_BEGIN(performance_monitor, 0x4f00, 0x20)
+ GEN_INT_ENTRY performance_monitor, virt=1, ool=1
+EXC_VIRT_END(performance_monitor, 0x4f00, 0x20)
+EXC_COMMON_BEGIN(performance_monitor_common)
+ GEN_COMMON performance_monitor
+ addi r3,r1,STACK_FRAME_OVERHEAD
+ lbz r4,PACAIRQSOFTMASK(r13)
+ cmpdi r4,IRQS_ENABLED
+ bne 1f
+ bl performance_monitor_exception_async
+ b interrupt_return_srr
+1:
+ bl performance_monitor_exception_nmi
+ /* Clear MSR_RI before setting SRR0 and SRR1. */
+ li r9,0
+ mtmsrd r9,1
+
+ kuap_kernel_restore r9, r10
+
+ EXCEPTION_RESTORE_REGS hsrr=0
+ RFI_TO_KERNEL
+
+/**
+ * Interrupt 0xf20 - Vector Unavailable Interrupt.
+ * This is a synchronous interrupt in response to
+ * executing a vector (or altivec) instruction with MSR[VEC]=0.
+ * Similar to FP unavailable.
+ */
+INT_DEFINE_BEGIN(altivec_unavailable)
+ IVEC=0xf20
+#ifdef CONFIG_KVM_BOOK3S_PR_POSSIBLE
+ IKVM_REAL=1
+#endif
+INT_DEFINE_END(altivec_unavailable)
+
+EXC_REAL_BEGIN(altivec_unavailable, 0xf20, 0x20)
+ GEN_INT_ENTRY altivec_unavailable, virt=0, ool=1
+EXC_REAL_END(altivec_unavailable, 0xf20, 0x20)
+EXC_VIRT_BEGIN(altivec_unavailable, 0x4f20, 0x20)
+ GEN_INT_ENTRY altivec_unavailable, virt=1, ool=1
+EXC_VIRT_END(altivec_unavailable, 0x4f20, 0x20)
+EXC_COMMON_BEGIN(altivec_unavailable_common)
+ GEN_COMMON altivec_unavailable
+#ifdef CONFIG_ALTIVEC
+BEGIN_FTR_SECTION
+ beq 1f
+#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
+ BEGIN_FTR_SECTION_NESTED(69)
+ /* Test if 2 TM state bits are zero. If non-zero (ie. userspace was in
+ * transaction), go do TM stuff
+ */
+ rldicl. r0, r12, (64-MSR_TS_LG), (64-2)
+ bne- 2f
+ END_FTR_SECTION_NESTED(CPU_FTR_TM, CPU_FTR_TM, 69)
+#endif
+ bl load_up_altivec
+ b fast_interrupt_return_srr
+#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
+2: /* User process was in a transaction */
+ addi r3,r1,STACK_FRAME_OVERHEAD
+ bl altivec_unavailable_tm
+ b interrupt_return_srr
+#endif
+1:
+END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
+#endif
+ addi r3,r1,STACK_FRAME_OVERHEAD
+ bl altivec_unavailable_exception
+ b interrupt_return_srr
+
+
+/**
+ * Interrupt 0xf40 - VSX Unavailable Interrupt.
+ * This is a synchronous interrupt in response to
+ * executing a VSX instruction with MSR[VSX]=0.
+ * Similar to FP unavailable.
+ */
+INT_DEFINE_BEGIN(vsx_unavailable)
+ IVEC=0xf40
+#ifdef CONFIG_KVM_BOOK3S_PR_POSSIBLE
+ IKVM_REAL=1
+#endif
+INT_DEFINE_END(vsx_unavailable)
+
+EXC_REAL_BEGIN(vsx_unavailable, 0xf40, 0x20)
+ GEN_INT_ENTRY vsx_unavailable, virt=0, ool=1
+EXC_REAL_END(vsx_unavailable, 0xf40, 0x20)
+EXC_VIRT_BEGIN(vsx_unavailable, 0x4f40, 0x20)
+ GEN_INT_ENTRY vsx_unavailable, virt=1, ool=1
+EXC_VIRT_END(vsx_unavailable, 0x4f40, 0x20)
+EXC_COMMON_BEGIN(vsx_unavailable_common)
+ GEN_COMMON vsx_unavailable
+#ifdef CONFIG_VSX
+BEGIN_FTR_SECTION
+ beq 1f
+#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
+ BEGIN_FTR_SECTION_NESTED(69)
+ /* Test if 2 TM state bits are zero. If non-zero (ie. userspace was in
+ * transaction), go do TM stuff
+ */
+ rldicl. r0, r12, (64-MSR_TS_LG), (64-2)
+ bne- 2f
+ END_FTR_SECTION_NESTED(CPU_FTR_TM, CPU_FTR_TM, 69)
+#endif
+ b load_up_vsx
+#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
+2: /* User process was in a transaction */
+ addi r3,r1,STACK_FRAME_OVERHEAD
+ bl vsx_unavailable_tm
+ b interrupt_return_srr
+#endif
+1:
+END_FTR_SECTION_IFSET(CPU_FTR_VSX)
+#endif
+ addi r3,r1,STACK_FRAME_OVERHEAD
+ bl vsx_unavailable_exception
+ b interrupt_return_srr
+
+
+/**
+ * Interrupt 0xf60 - Facility Unavailable Interrupt.
+ * This is a synchronous interrupt in response to
+ * executing an instruction without access to the facility that can be
+ * resolved by the OS (e.g., FSCR, MSR).
+ * Similar to FP unavailable.
+ */
+INT_DEFINE_BEGIN(facility_unavailable)
+ IVEC=0xf60
+#ifdef CONFIG_KVM_BOOK3S_PR_POSSIBLE
+ IKVM_REAL=1
+#endif
+INT_DEFINE_END(facility_unavailable)
+
+EXC_REAL_BEGIN(facility_unavailable, 0xf60, 0x20)
+ GEN_INT_ENTRY facility_unavailable, virt=0, ool=1
+EXC_REAL_END(facility_unavailable, 0xf60, 0x20)
+EXC_VIRT_BEGIN(facility_unavailable, 0x4f60, 0x20)
+ GEN_INT_ENTRY facility_unavailable, virt=1, ool=1
+EXC_VIRT_END(facility_unavailable, 0x4f60, 0x20)
+EXC_COMMON_BEGIN(facility_unavailable_common)
+ GEN_COMMON facility_unavailable
+ addi r3,r1,STACK_FRAME_OVERHEAD
+ bl facility_unavailable_exception
+ REST_NVGPRS(r1) /* instruction emulation may change GPRs */
+ b interrupt_return_srr
+
+
+/**
+ * Interrupt 0xf60 - Hypervisor Facility Unavailable Interrupt.
+ * This is a synchronous interrupt in response to
+ * executing an instruction without access to the facility that can only
+ * be resolved in HV mode (e.g., HFSCR).
+ * Similar to FP unavailable.
+ */
+INT_DEFINE_BEGIN(h_facility_unavailable)
+ IVEC=0xf80
+ IHSRR=1
+ IKVM_REAL=1
+ IKVM_VIRT=1
+INT_DEFINE_END(h_facility_unavailable)
+
+EXC_REAL_BEGIN(h_facility_unavailable, 0xf80, 0x20)
+ GEN_INT_ENTRY h_facility_unavailable, virt=0, ool=1
+EXC_REAL_END(h_facility_unavailable, 0xf80, 0x20)
+EXC_VIRT_BEGIN(h_facility_unavailable, 0x4f80, 0x20)
+ GEN_INT_ENTRY h_facility_unavailable, virt=1, ool=1
+EXC_VIRT_END(h_facility_unavailable, 0x4f80, 0x20)
+EXC_COMMON_BEGIN(h_facility_unavailable_common)
+ GEN_COMMON h_facility_unavailable
+ addi r3,r1,STACK_FRAME_OVERHEAD
+ bl facility_unavailable_exception
+ REST_NVGPRS(r1) /* XXX Shouldn't be necessary in practice */
+ b interrupt_return_hsrr
+
+
+EXC_REAL_NONE(0xfa0, 0x20)
+EXC_VIRT_NONE(0x4fa0, 0x20)
+EXC_REAL_NONE(0xfc0, 0x20)
+EXC_VIRT_NONE(0x4fc0, 0x20)
+EXC_REAL_NONE(0xfe0, 0x20)
+EXC_VIRT_NONE(0x4fe0, 0x20)
+
+EXC_REAL_NONE(0x1000, 0x100)
+EXC_VIRT_NONE(0x5000, 0x100)
+EXC_REAL_NONE(0x1100, 0x100)
+EXC_VIRT_NONE(0x5100, 0x100)
+
+#ifdef CONFIG_CBE_RAS
+INT_DEFINE_BEGIN(cbe_system_error)
+ IVEC=0x1200
+ IHSRR=1
+INT_DEFINE_END(cbe_system_error)
+
+EXC_REAL_BEGIN(cbe_system_error, 0x1200, 0x100)
+ GEN_INT_ENTRY cbe_system_error, virt=0
+EXC_REAL_END(cbe_system_error, 0x1200, 0x100)
+EXC_VIRT_NONE(0x5200, 0x100)
+EXC_COMMON_BEGIN(cbe_system_error_common)
+ GEN_COMMON cbe_system_error
+ addi r3,r1,STACK_FRAME_OVERHEAD
+ bl cbe_system_error_exception
+ b interrupt_return_hsrr
+
+#else /* CONFIG_CBE_RAS */
+EXC_REAL_NONE(0x1200, 0x100)
+EXC_VIRT_NONE(0x5200, 0x100)
+#endif
+
+/**
+ * Interrupt 0x1300 - Instruction Address Breakpoint Interrupt.
+ * This has been removed from the ISA before 2.01, which is the earliest
+ * 64-bit BookS ISA supported, however the G5 / 970 implements this
+ * interrupt with a non-architected feature available through the support
+ * processor interface.
+ */
+INT_DEFINE_BEGIN(instruction_breakpoint)
+ IVEC=0x1300
+#ifdef CONFIG_KVM_BOOK3S_PR_POSSIBLE
+ IKVM_REAL=1
+#endif
+INT_DEFINE_END(instruction_breakpoint)
+
+EXC_REAL_BEGIN(instruction_breakpoint, 0x1300, 0x100)
+ GEN_INT_ENTRY instruction_breakpoint, virt=0
+EXC_REAL_END(instruction_breakpoint, 0x1300, 0x100)
+EXC_VIRT_BEGIN(instruction_breakpoint, 0x5300, 0x100)
+ GEN_INT_ENTRY instruction_breakpoint, virt=1
+EXC_VIRT_END(instruction_breakpoint, 0x5300, 0x100)
+EXC_COMMON_BEGIN(instruction_breakpoint_common)
+ GEN_COMMON instruction_breakpoint
+ addi r3,r1,STACK_FRAME_OVERHEAD
+ bl instruction_breakpoint_exception
+ b interrupt_return_srr
+
+
+EXC_REAL_NONE(0x1400, 0x100)
+EXC_VIRT_NONE(0x5400, 0x100)
+
+/**
+ * Interrupt 0x1500 - Soft Patch Interrupt
+ *
+ * Handling:
+ * This is an implementation specific interrupt which can be used for a
+ * range of exceptions.
+ *
+ * This interrupt handler is unique in that it runs the denormal assist
+ * code even for guests (and even in guest context) without going to KVM,
+ * for speed. POWER9 does not raise denorm exceptions, so this special case
+ * could be phased out in future to reduce special cases.
+ */
+INT_DEFINE_BEGIN(denorm_exception)
+ IVEC=0x1500
+ IHSRR=1
+ IBRANCH_TO_COMMON=0
+ IKVM_REAL=1
+INT_DEFINE_END(denorm_exception)
+
+EXC_REAL_BEGIN(denorm_exception, 0x1500, 0x100)
+ GEN_INT_ENTRY denorm_exception, virt=0
+#ifdef CONFIG_PPC_DENORMALISATION
+ andis. r10,r12,(HSRR1_DENORM)@h /* denorm? */
+ bne+ denorm_assist
+#endif
+ GEN_BRANCH_TO_COMMON denorm_exception, virt=0
+EXC_REAL_END(denorm_exception, 0x1500, 0x100)
+#ifdef CONFIG_PPC_DENORMALISATION
+EXC_VIRT_BEGIN(denorm_exception, 0x5500, 0x100)
+ GEN_INT_ENTRY denorm_exception, virt=1
+ andis. r10,r12,(HSRR1_DENORM)@h /* denorm? */
+ bne+ denorm_assist
+ GEN_BRANCH_TO_COMMON denorm_exception, virt=1
+EXC_VIRT_END(denorm_exception, 0x5500, 0x100)
+#else
+EXC_VIRT_NONE(0x5500, 0x100)
+#endif
+
+#ifdef CONFIG_PPC_DENORMALISATION
+TRAMP_REAL_BEGIN(denorm_assist)
+BEGIN_FTR_SECTION
+/*
+ * To denormalise we need to move a copy of the register to itself.
+ * For POWER6 do that here for all FP regs.
+ */
+ mfmsr r10
+ ori r10,r10,(MSR_FP|MSR_FE0|MSR_FE1)
+ xori r10,r10,(MSR_FE0|MSR_FE1)
+ mtmsrd r10
+ sync
+
+ .Lreg=0
+ .rept 32
+ fmr .Lreg,.Lreg
+ .Lreg=.Lreg+1
+ .endr
+
+FTR_SECTION_ELSE
+/*
+ * To denormalise we need to move a copy of the register to itself.
+ * For POWER7 do that here for the first 32 VSX registers only.
+ */
+ mfmsr r10
+ oris r10,r10,MSR_VSX@h
+ mtmsrd r10
+ sync
+
+ .Lreg=0
+ .rept 32
+ XVCPSGNDP(.Lreg,.Lreg,.Lreg)
+ .Lreg=.Lreg+1
+ .endr
+
+ALT_FTR_SECTION_END_IFCLR(CPU_FTR_ARCH_206)
+
+BEGIN_FTR_SECTION
+ b denorm_done
+END_FTR_SECTION_IFCLR(CPU_FTR_ARCH_207S)
+/*
+ * To denormalise we need to move a copy of the register to itself.
+ * For POWER8 we need to do that for all 64 VSX registers
+ */
+ .Lreg=32
+ .rept 32
+ XVCPSGNDP(.Lreg,.Lreg,.Lreg)
+ .Lreg=.Lreg+1
+ .endr
+
+denorm_done:
+ mfspr r11,SPRN_HSRR0
+ subi r11,r11,4
+ mtspr SPRN_HSRR0,r11
+ mtcrf 0x80,r9
+ ld r9,PACA_EXGEN+EX_R9(r13)
+BEGIN_FTR_SECTION
+ ld r10,PACA_EXGEN+EX_PPR(r13)
+ mtspr SPRN_PPR,r10
+END_FTR_SECTION_IFSET(CPU_FTR_HAS_PPR)
+BEGIN_FTR_SECTION
+ ld r10,PACA_EXGEN+EX_CFAR(r13)
+ mtspr SPRN_CFAR,r10
+END_FTR_SECTION_IFSET(CPU_FTR_CFAR)
+ li r10,0
+ stb r10,PACAHSRR_VALID(r13)
+ ld r10,PACA_EXGEN+EX_R10(r13)
+ ld r11,PACA_EXGEN+EX_R11(r13)
+ ld r12,PACA_EXGEN+EX_R12(r13)
+ ld r13,PACA_EXGEN+EX_R13(r13)
+ HRFI_TO_UNKNOWN
+ b .
+#endif
+
+EXC_COMMON_BEGIN(denorm_exception_common)
+ GEN_COMMON denorm_exception
+ addi r3,r1,STACK_FRAME_OVERHEAD
+ bl unknown_exception
+ b interrupt_return_hsrr
+
+
+#ifdef CONFIG_CBE_RAS
+INT_DEFINE_BEGIN(cbe_maintenance)
+ IVEC=0x1600
+ IHSRR=1
+INT_DEFINE_END(cbe_maintenance)
+
+EXC_REAL_BEGIN(cbe_maintenance, 0x1600, 0x100)
+ GEN_INT_ENTRY cbe_maintenance, virt=0
+EXC_REAL_END(cbe_maintenance, 0x1600, 0x100)
+EXC_VIRT_NONE(0x5600, 0x100)
+EXC_COMMON_BEGIN(cbe_maintenance_common)
+ GEN_COMMON cbe_maintenance
+ addi r3,r1,STACK_FRAME_OVERHEAD
+ bl cbe_maintenance_exception
+ b interrupt_return_hsrr
+
+#else /* CONFIG_CBE_RAS */
+EXC_REAL_NONE(0x1600, 0x100)
+EXC_VIRT_NONE(0x5600, 0x100)
+#endif
+
+
+INT_DEFINE_BEGIN(altivec_assist)
+ IVEC=0x1700
+#ifdef CONFIG_KVM_BOOK3S_PR_POSSIBLE
+ IKVM_REAL=1
+#endif
+INT_DEFINE_END(altivec_assist)
+
+EXC_REAL_BEGIN(altivec_assist, 0x1700, 0x100)
+ GEN_INT_ENTRY altivec_assist, virt=0
+EXC_REAL_END(altivec_assist, 0x1700, 0x100)
+EXC_VIRT_BEGIN(altivec_assist, 0x5700, 0x100)
+ GEN_INT_ENTRY altivec_assist, virt=1
+EXC_VIRT_END(altivec_assist, 0x5700, 0x100)
+EXC_COMMON_BEGIN(altivec_assist_common)
+ GEN_COMMON altivec_assist
+ addi r3,r1,STACK_FRAME_OVERHEAD
+#ifdef CONFIG_ALTIVEC
+ bl altivec_assist_exception
+ REST_NVGPRS(r1) /* instruction emulation may change GPRs */
+#else
+ bl unknown_exception
+#endif
+ b interrupt_return_srr
+
+
+#ifdef CONFIG_CBE_RAS
+INT_DEFINE_BEGIN(cbe_thermal)
+ IVEC=0x1800
+ IHSRR=1
+INT_DEFINE_END(cbe_thermal)
+
+EXC_REAL_BEGIN(cbe_thermal, 0x1800, 0x100)
+ GEN_INT_ENTRY cbe_thermal, virt=0
+EXC_REAL_END(cbe_thermal, 0x1800, 0x100)
+EXC_VIRT_NONE(0x5800, 0x100)
+EXC_COMMON_BEGIN(cbe_thermal_common)
+ GEN_COMMON cbe_thermal
+ addi r3,r1,STACK_FRAME_OVERHEAD
+ bl cbe_thermal_exception
+ b interrupt_return_hsrr
+
+#else /* CONFIG_CBE_RAS */
+EXC_REAL_NONE(0x1800, 0x100)
+EXC_VIRT_NONE(0x5800, 0x100)
+#endif
+
+
+#ifdef CONFIG_PPC_WATCHDOG
+
+INT_DEFINE_BEGIN(soft_nmi)
+ IVEC=0x900
+ ISTACK=0
+ ICFAR=0
+INT_DEFINE_END(soft_nmi)
+
+/*
+ * Branch to soft_nmi_interrupt using the emergency stack. The emergency
+ * stack is one that is usable by maskable interrupts so long as MSR_EE
+ * remains off. It is used for recovery when something has corrupted the
+ * normal kernel stack, for example. The "soft NMI" must not use the process
+ * stack because we want irq disabled sections to avoid touching the stack
+ * at all (other than PMU interrupts), so use the emergency stack for this,
+ * and run it entirely with interrupts hard disabled.
+ */
+EXC_COMMON_BEGIN(soft_nmi_common)
+ mr r10,r1
+ ld r1,PACAEMERGSP(r13)
+ subi r1,r1,INT_FRAME_SIZE
+ __GEN_COMMON_BODY soft_nmi
+
+ addi r3,r1,STACK_FRAME_OVERHEAD
+ bl soft_nmi_interrupt
+
+ /* Clear MSR_RI before setting SRR0 and SRR1. */
+ li r9,0
+ mtmsrd r9,1
+
+ kuap_kernel_restore r9, r10
+
+ EXCEPTION_RESTORE_REGS hsrr=0
+ RFI_TO_KERNEL
+
+#endif /* CONFIG_PPC_WATCHDOG */
+
+/*
+ * An interrupt came in while soft-disabled. We set paca->irq_happened, then:
+ * - If it was a decrementer interrupt, we bump the dec to max and return.
+ * - If it was a doorbell we return immediately since doorbells are edge
+ * triggered and won't automatically refire.
+ * - If it was a HMI we return immediately since we handled it in realmode
+ * and it won't refire.
+ * - Else it is one of PACA_IRQ_MUST_HARD_MASK, so hard disable and return.
+ * This is called with r10 containing the value to OR to the paca field.
+ */
+.macro MASKED_INTERRUPT hsrr=0
+ .if \hsrr
+masked_Hinterrupt:
+ .else
+masked_interrupt:
+ .endif
+ stw r9,PACA_EXGEN+EX_CCR(r13)
+#ifdef CONFIG_PPC_IRQ_SOFT_MASK_DEBUG
+ /*
+ * Ensure there was no previous MUST_HARD_MASK interrupt or
+ * HARD_DIS setting. If this does fire, the interrupt is still
+ * masked and MSR[EE] will be cleared on return, so no need to
+ * panic, but somebody probably enabled MSR[EE] under
+ * PACA_IRQ_HARD_DIS, mtmsr(mfmsr() | MSR_x) being a common
+ * cause.
+ */
+ lbz r9,PACAIRQHAPPENED(r13)
+ andi. r9,r9,(PACA_IRQ_MUST_HARD_MASK|PACA_IRQ_HARD_DIS)
+0: tdnei r9,0
+ EMIT_WARN_ENTRY 0b,__FILE__,__LINE__,(BUGFLAG_WARNING | BUGFLAG_ONCE)
+#endif
+ lbz r9,PACAIRQHAPPENED(r13)
+ or r9,r9,r10
+ stb r9,PACAIRQHAPPENED(r13)
+
+ .if ! \hsrr
+ cmpwi r10,PACA_IRQ_DEC
+ bne 1f
+ LOAD_REG_IMMEDIATE(r9, 0x7fffffff)
+ mtspr SPRN_DEC,r9
+#ifdef CONFIG_PPC_WATCHDOG
+ lwz r9,PACA_EXGEN+EX_CCR(r13)
+ b soft_nmi_common
+#else
+ b 2f
+#endif
+ .endif
+
+1: andi. r10,r10,PACA_IRQ_MUST_HARD_MASK
+ beq 2f
+ xori r12,r12,MSR_EE /* clear MSR_EE */
+ .if \hsrr
+ mtspr SPRN_HSRR1,r12
+ .else
+ mtspr SPRN_SRR1,r12
+ .endif
+ ori r9,r9,PACA_IRQ_HARD_DIS
+ stb r9,PACAIRQHAPPENED(r13)
+2: /* done */
+ li r9,0
+ .if \hsrr
+ stb r9,PACAHSRR_VALID(r13)
+ .else
+ stb r9,PACASRR_VALID(r13)
+ .endif
+
+ SEARCH_RESTART_TABLE
+ cmpdi r12,0
+ beq 3f
+ .if \hsrr
+ mtspr SPRN_HSRR0,r12
+ .else
+ mtspr SPRN_SRR0,r12
+ .endif
+3:
+
+ ld r9,PACA_EXGEN+EX_CTR(r13)
+ mtctr r9
+ lwz r9,PACA_EXGEN+EX_CCR(r13)
+ mtcrf 0x80,r9
+ std r1,PACAR1(r13)
+ ld r9,PACA_EXGEN+EX_R9(r13)
+ ld r10,PACA_EXGEN+EX_R10(r13)
+ ld r11,PACA_EXGEN+EX_R11(r13)
+ ld r12,PACA_EXGEN+EX_R12(r13)
+ ld r13,PACA_EXGEN+EX_R13(r13)
+ /* May return to masked low address where r13 is not set up */
+ .if \hsrr
+ HRFI_TO_KERNEL
+ .else
+ RFI_TO_KERNEL
+ .endif
+ b .
+.endm
+
+TRAMP_REAL_BEGIN(stf_barrier_fallback)
+ std r9,PACA_EXRFI+EX_R9(r13)
+ std r10,PACA_EXRFI+EX_R10(r13)
+ sync
+ ld r9,PACA_EXRFI+EX_R9(r13)
+ ld r10,PACA_EXRFI+EX_R10(r13)
+ ori 31,31,0
+ .rept 14
+ b 1f
+1:
+ .endr
+ blr
+
+/* Clobbers r10, r11, ctr */
+.macro L1D_DISPLACEMENT_FLUSH
+ ld r10,PACA_RFI_FLUSH_FALLBACK_AREA(r13)
+ ld r11,PACA_L1D_FLUSH_SIZE(r13)
+ srdi r11,r11,(7 + 3) /* 128 byte lines, unrolled 8x */
+ mtctr r11
+ DCBT_BOOK3S_STOP_ALL_STREAM_IDS(r11) /* Stop prefetch streams */
+
+ /* order ld/st prior to dcbt stop all streams with flushing */
+ sync
+
+ /*
+ * The load addresses are at staggered offsets within cachelines,
+ * which suits some pipelines better (on others it should not
+ * hurt).
+ */
+1:
+ ld r11,(0x80 + 8)*0(r10)
+ ld r11,(0x80 + 8)*1(r10)
+ ld r11,(0x80 + 8)*2(r10)
+ ld r11,(0x80 + 8)*3(r10)
+ ld r11,(0x80 + 8)*4(r10)
+ ld r11,(0x80 + 8)*5(r10)
+ ld r11,(0x80 + 8)*6(r10)
+ ld r11,(0x80 + 8)*7(r10)
+ addi r10,r10,0x80*8
+ bdnz 1b
+.endm
+
+TRAMP_REAL_BEGIN(entry_flush_fallback)
+ std r9,PACA_EXRFI+EX_R9(r13)
+ std r10,PACA_EXRFI+EX_R10(r13)
+ std r11,PACA_EXRFI+EX_R11(r13)
+ mfctr r9
+ L1D_DISPLACEMENT_FLUSH
+ mtctr r9
+ ld r9,PACA_EXRFI+EX_R9(r13)
+ ld r10,PACA_EXRFI+EX_R10(r13)
+ ld r11,PACA_EXRFI+EX_R11(r13)
+ blr
+
+/*
+ * The SCV entry flush happens with interrupts enabled, so it must disable
+ * to prevent EXRFI being clobbered by NMIs (e.g., soft_nmi_common). r10
+ * (containing LR) does not need to be preserved here because scv entry
+ * puts 0 in the pt_regs, CTR can be clobbered for the same reason.
+ */
+TRAMP_REAL_BEGIN(scv_entry_flush_fallback)
+ li r10,0
+ mtmsrd r10,1
+ lbz r10,PACAIRQHAPPENED(r13)
+ ori r10,r10,PACA_IRQ_HARD_DIS
+ stb r10,PACAIRQHAPPENED(r13)
+ std r11,PACA_EXRFI+EX_R11(r13)
+ L1D_DISPLACEMENT_FLUSH
+ ld r11,PACA_EXRFI+EX_R11(r13)
+ li r10,MSR_RI
+ mtmsrd r10,1
+ blr
+
+TRAMP_REAL_BEGIN(rfi_flush_fallback)
+ SET_SCRATCH0(r13);
+ GET_PACA(r13);
+ std r1,PACA_EXRFI+EX_R12(r13)
+ ld r1,PACAKSAVE(r13)
+ std r9,PACA_EXRFI+EX_R9(r13)
+ std r10,PACA_EXRFI+EX_R10(r13)
+ std r11,PACA_EXRFI+EX_R11(r13)
+ mfctr r9
+ L1D_DISPLACEMENT_FLUSH
+ mtctr r9
+ ld r9,PACA_EXRFI+EX_R9(r13)
+ ld r10,PACA_EXRFI+EX_R10(r13)
+ ld r11,PACA_EXRFI+EX_R11(r13)
+ ld r1,PACA_EXRFI+EX_R12(r13)
+ GET_SCRATCH0(r13);
+ rfid
+
+TRAMP_REAL_BEGIN(hrfi_flush_fallback)
+ SET_SCRATCH0(r13);
+ GET_PACA(r13);
+ std r1,PACA_EXRFI+EX_R12(r13)
+ ld r1,PACAKSAVE(r13)
+ std r9,PACA_EXRFI+EX_R9(r13)
+ std r10,PACA_EXRFI+EX_R10(r13)
+ std r11,PACA_EXRFI+EX_R11(r13)
+ mfctr r9
+ L1D_DISPLACEMENT_FLUSH
+ mtctr r9
+ ld r9,PACA_EXRFI+EX_R9(r13)
+ ld r10,PACA_EXRFI+EX_R10(r13)
+ ld r11,PACA_EXRFI+EX_R11(r13)
+ ld r1,PACA_EXRFI+EX_R12(r13)
+ GET_SCRATCH0(r13);
+ hrfid
+
+TRAMP_REAL_BEGIN(rfscv_flush_fallback)
+ /* system call volatile */
+ mr r7,r13
+ GET_PACA(r13);
+ mr r8,r1
+ ld r1,PACAKSAVE(r13)
+ mfctr r9
+ ld r10,PACA_RFI_FLUSH_FALLBACK_AREA(r13)
+ ld r11,PACA_L1D_FLUSH_SIZE(r13)
+ srdi r11,r11,(7 + 3) /* 128 byte lines, unrolled 8x */
+ mtctr r11
+ DCBT_BOOK3S_STOP_ALL_STREAM_IDS(r11) /* Stop prefetch streams */
+
+ /* order ld/st prior to dcbt stop all streams with flushing */
+ sync
+
+ /*
+ * The load adresses are at staggered offsets within cachelines,
+ * which suits some pipelines better (on others it should not
+ * hurt).
+ */
+1:
+ ld r11,(0x80 + 8)*0(r10)
+ ld r11,(0x80 + 8)*1(r10)
+ ld r11,(0x80 + 8)*2(r10)
+ ld r11,(0x80 + 8)*3(r10)
+ ld r11,(0x80 + 8)*4(r10)
+ ld r11,(0x80 + 8)*5(r10)
+ ld r11,(0x80 + 8)*6(r10)
+ ld r11,(0x80 + 8)*7(r10)
+ addi r10,r10,0x80*8
+ bdnz 1b
+
+ mtctr r9
+ li r9,0
+ li r10,0
+ li r11,0
+ mr r1,r8
+ mr r13,r7
+ RFSCV
+
+USE_TEXT_SECTION()
+
+#ifdef CONFIG_KVM_BOOK3S_64_HANDLER
+kvm_interrupt:
+ /*
+ * The conditional branch in KVMTEST can't reach all the way,
+ * make a stub.
+ */
+ b kvmppc_interrupt
+#endif
+
+_GLOBAL(do_uaccess_flush)
+ UACCESS_FLUSH_FIXUP_SECTION
+ nop
+ nop
+ nop
+ blr
+ L1D_DISPLACEMENT_FLUSH
+ blr
+_ASM_NOKPROBE_SYMBOL(do_uaccess_flush)
+EXPORT_SYMBOL(do_uaccess_flush)
+
+
+MASKED_INTERRUPT
+MASKED_INTERRUPT hsrr=1
+
+USE_FIXED_SECTION(virt_trampolines)
+ /*
+ * All code below __end_soft_masked is treated as soft-masked. If
+ * any code runs here with MSR[EE]=1, it must then cope with pending
+ * soft interrupt being raised (i.e., by ensuring it is replayed).
+ *
+ * The __end_interrupts marker must be past the out-of-line (OOL)
+ * handlers, so that they are copied to real address 0x100 when running
+ * a relocatable kernel. This ensures they can be reached from the short
+ * trampoline handlers (like 0x4f00, 0x4f20, etc.) which branch
+ * directly, without using LOAD_HANDLER().
+ */
+ .align 7
+ .globl __end_interrupts
+__end_interrupts:
+DEFINE_FIXED_SYMBOL(__end_interrupts, virt_trampolines)
+
+CLOSE_FIXED_SECTION(real_vectors);
+CLOSE_FIXED_SECTION(real_trampolines);
+CLOSE_FIXED_SECTION(virt_vectors);
+CLOSE_FIXED_SECTION(virt_trampolines);
+
+USE_TEXT_SECTION()
+
+/* MSR[RI] should be clear because this uses SRR[01] */
+_GLOBAL(enable_machine_check)
+ mflr r0
+ bcl 20,31,$+4
+0: mflr r3
+ addi r3,r3,(1f - 0b)
+ mtspr SPRN_SRR0,r3
+ mfmsr r3
+ ori r3,r3,MSR_ME
+ mtspr SPRN_SRR1,r3
+ RFI_TO_KERNEL
+1: mtlr r0
+ blr
+
+/* MSR[RI] should be clear because this uses SRR[01] */
+disable_machine_check:
+ mflr r0
+ bcl 20,31,$+4
+0: mflr r3
+ addi r3,r3,(1f - 0b)
+ mtspr SPRN_SRR0,r3
+ mfmsr r3
+ li r4,MSR_ME
+ andc r3,r3,r4
+ mtspr SPRN_SRR1,r3
+ RFI_TO_KERNEL
+1: mtlr r0
+ blr