summaryrefslogtreecommitdiffstats
path: root/arch/powerpc/kernel/head_book3s_32.S
diff options
context:
space:
mode:
Diffstat (limited to 'arch/powerpc/kernel/head_book3s_32.S')
-rw-r--r--arch/powerpc/kernel/head_book3s_32.S1204
1 files changed, 1204 insertions, 0 deletions
diff --git a/arch/powerpc/kernel/head_book3s_32.S b/arch/powerpc/kernel/head_book3s_32.S
new file mode 100644
index 000000000..519b60695
--- /dev/null
+++ b/arch/powerpc/kernel/head_book3s_32.S
@@ -0,0 +1,1204 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * PowerPC version
+ * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
+ *
+ * Rewritten by Cort Dougan (cort@cs.nmt.edu) for PReP
+ * Copyright (C) 1996 Cort Dougan <cort@cs.nmt.edu>
+ * Adapted for Power Macintosh by Paul Mackerras.
+ * Low-level exception handlers and MMU support
+ * rewritten by Paul Mackerras.
+ * Copyright (C) 1996 Paul Mackerras.
+ * MPC8xx modifications Copyright (C) 1997 Dan Malek (dmalek@jlc.net).
+ *
+ * This file contains the low-level support and setup for the
+ * PowerPC platform, including trap and interrupt dispatch.
+ * (The PPC 8xx embedded CPUs use head_8xx.S instead.)
+ */
+
+#include <linux/init.h>
+#include <linux/pgtable.h>
+#include <asm/reg.h>
+#include <asm/page.h>
+#include <asm/mmu.h>
+#include <asm/cputable.h>
+#include <asm/cache.h>
+#include <asm/thread_info.h>
+#include <asm/ppc_asm.h>
+#include <asm/asm-offsets.h>
+#include <asm/ptrace.h>
+#include <asm/bug.h>
+#include <asm/kvm_book3s_asm.h>
+#include <asm/export.h>
+#include <asm/feature-fixups.h>
+#include <asm/interrupt.h>
+
+#include "head_32.h"
+
+#define LOAD_BAT(n, reg, RA, RB) \
+ /* see the comment for clear_bats() -- Cort */ \
+ li RA,0; \
+ mtspr SPRN_IBAT##n##U,RA; \
+ mtspr SPRN_DBAT##n##U,RA; \
+ lwz RA,(n*16)+0(reg); \
+ lwz RB,(n*16)+4(reg); \
+ mtspr SPRN_IBAT##n##U,RA; \
+ mtspr SPRN_IBAT##n##L,RB; \
+ lwz RA,(n*16)+8(reg); \
+ lwz RB,(n*16)+12(reg); \
+ mtspr SPRN_DBAT##n##U,RA; \
+ mtspr SPRN_DBAT##n##L,RB
+
+ __HEAD
+_GLOBAL(_stext);
+
+/*
+ * _start is defined this way because the XCOFF loader in the OpenFirmware
+ * on the powermac expects the entry point to be a procedure descriptor.
+ */
+_GLOBAL(_start);
+ /*
+ * These are here for legacy reasons, the kernel used to
+ * need to look like a coff function entry for the pmac
+ * but we're always started by some kind of bootloader now.
+ * -- Cort
+ */
+ nop /* used by __secondary_hold on prep (mtx) and chrp smp */
+ nop /* used by __secondary_hold on prep (mtx) and chrp smp */
+ nop
+
+/* PMAC
+ * Enter here with the kernel text, data and bss loaded starting at
+ * 0, running with virtual == physical mapping.
+ * r5 points to the prom entry point (the client interface handler
+ * address). Address translation is turned on, with the prom
+ * managing the hash table. Interrupts are disabled. The stack
+ * pointer (r1) points to just below the end of the half-meg region
+ * from 0x380000 - 0x400000, which is mapped in already.
+ *
+ * If we are booted from MacOS via BootX, we enter with the kernel
+ * image loaded somewhere, and the following values in registers:
+ * r3: 'BooX' (0x426f6f58)
+ * r4: virtual address of boot_infos_t
+ * r5: 0
+ *
+ * PREP
+ * This is jumped to on prep systems right after the kernel is relocated
+ * to its proper place in memory by the boot loader. The expected layout
+ * of the regs is:
+ * r3: ptr to residual data
+ * r4: initrd_start or if no initrd then 0
+ * r5: initrd_end - unused if r4 is 0
+ * r6: Start of command line string
+ * r7: End of command line string
+ *
+ * This just gets a minimal mmu environment setup so we can call
+ * start_here() to do the real work.
+ * -- Cort
+ */
+
+ .globl __start
+__start:
+/*
+ * We have to do any OF calls before we map ourselves to KERNELBASE,
+ * because OF may have I/O devices mapped into that area
+ * (particularly on CHRP).
+ */
+ cmpwi 0,r5,0
+ beq 1f
+
+#ifdef CONFIG_PPC_OF_BOOT_TRAMPOLINE
+ /* find out where we are now */
+ bcl 20,31,$+4
+0: mflr r8 /* r8 = runtime addr here */
+ addis r8,r8,(_stext - 0b)@ha
+ addi r8,r8,(_stext - 0b)@l /* current runtime base addr */
+ bl prom_init
+#endif /* CONFIG_PPC_OF_BOOT_TRAMPOLINE */
+
+ /* We never return. We also hit that trap if trying to boot
+ * from OF while CONFIG_PPC_OF_BOOT_TRAMPOLINE isn't selected */
+ trap
+
+/*
+ * Check for BootX signature when supporting PowerMac and branch to
+ * appropriate trampoline if it's present
+ */
+#ifdef CONFIG_PPC_PMAC
+1: lis r31,0x426f
+ ori r31,r31,0x6f58
+ cmpw 0,r3,r31
+ bne 1f
+ bl bootx_init
+ trap
+#endif /* CONFIG_PPC_PMAC */
+
+1: mr r31,r3 /* save device tree ptr */
+ li r24,0 /* cpu # */
+
+/*
+ * early_init() does the early machine identification and does
+ * the necessary low-level setup and clears the BSS
+ * -- Cort <cort@fsmlabs.com>
+ */
+ bl early_init
+
+/* Switch MMU off, clear BATs and flush TLB. At this point, r3 contains
+ * the physical address we are running at, returned by early_init()
+ */
+ bl mmu_off
+__after_mmu_off:
+ bl clear_bats
+ bl flush_tlbs
+
+ bl initial_bats
+ bl load_segment_registers
+ bl reloc_offset
+ bl early_hash_table
+#if defined(CONFIG_BOOTX_TEXT)
+ bl setup_disp_bat
+#endif
+#ifdef CONFIG_PPC_EARLY_DEBUG_CPM
+ bl setup_cpm_bat
+#endif
+#ifdef CONFIG_PPC_EARLY_DEBUG_USBGECKO
+ bl setup_usbgecko_bat
+#endif
+
+/*
+ * Call setup_cpu for CPU 0 and initialize 6xx Idle
+ */
+ bl reloc_offset
+ li r24,0 /* cpu# */
+ bl call_setup_cpu /* Call setup_cpu for this CPU */
+ bl reloc_offset
+ bl init_idle_6xx
+
+
+/*
+ * We need to run with _start at physical address 0.
+ * On CHRP, we are loaded at 0x10000 since OF on CHRP uses
+ * the exception vectors at 0 (and therefore this copy
+ * overwrites OF's exception vectors with our own).
+ * The MMU is off at this point.
+ */
+ bl reloc_offset
+ mr r26,r3
+ addis r4,r3,KERNELBASE@h /* current address of _start */
+ lis r5,PHYSICAL_START@h
+ cmplw 0,r4,r5 /* already running at PHYSICAL_START? */
+ bne relocate_kernel
+/*
+ * we now have the 1st 16M of ram mapped with the bats.
+ * prep needs the mmu to be turned on here, but pmac already has it on.
+ * this shouldn't bother the pmac since it just gets turned on again
+ * as we jump to our code at KERNELBASE. -- Cort
+ * Actually no, pmac doesn't have it on any more. BootX enters with MMU
+ * off, and in other cases, we now turn it off before changing BATs above.
+ */
+turn_on_mmu:
+ mfmsr r0
+ ori r0,r0,MSR_DR|MSR_IR|MSR_RI
+ mtspr SPRN_SRR1,r0
+ lis r0,start_here@h
+ ori r0,r0,start_here@l
+ mtspr SPRN_SRR0,r0
+ rfi /* enables MMU */
+
+/*
+ * We need __secondary_hold as a place to hold the other cpus on
+ * an SMP machine, even when we are running a UP kernel.
+ */
+ . = 0xc0 /* for prep bootloader */
+ li r3,1 /* MTX only has 1 cpu */
+ .globl __secondary_hold
+__secondary_hold:
+ /* tell the master we're here */
+ stw r3,__secondary_hold_acknowledge@l(0)
+#ifdef CONFIG_SMP
+100: lwz r4,0(0)
+ /* wait until we're told to start */
+ cmpw 0,r4,r3
+ bne 100b
+ /* our cpu # was at addr 0 - go */
+ mr r24,r3 /* cpu # */
+ b __secondary_start
+#else
+ b .
+#endif /* CONFIG_SMP */
+
+ .globl __secondary_hold_spinloop
+__secondary_hold_spinloop:
+ .long 0
+ .globl __secondary_hold_acknowledge
+__secondary_hold_acknowledge:
+ .long -1
+
+/* System reset */
+/* core99 pmac starts the seconary here by changing the vector, and
+ putting it back to what it was (unknown_async_exception) when done. */
+ EXCEPTION(INTERRUPT_SYSTEM_RESET, Reset, unknown_async_exception)
+
+/* Machine check */
+/*
+ * On CHRP, this is complicated by the fact that we could get a
+ * machine check inside RTAS, and we have no guarantee that certain
+ * critical registers will have the values we expect. The set of
+ * registers that might have bad values includes all the GPRs
+ * and all the BATs. We indicate that we are in RTAS by putting
+ * a non-zero value, the address of the exception frame to use,
+ * in thread.rtas_sp. The machine check handler checks thread.rtas_sp
+ * and uses its value if it is non-zero.
+ * (Other exception handlers assume that r1 is a valid kernel stack
+ * pointer when we take an exception from supervisor mode.)
+ * -- paulus.
+ */
+ START_EXCEPTION(INTERRUPT_MACHINE_CHECK, MachineCheck)
+ EXCEPTION_PROLOG_0
+#ifdef CONFIG_PPC_CHRP
+ mtspr SPRN_SPRG_SCRATCH2,r1
+ mfspr r1, SPRN_SPRG_THREAD
+ lwz r1, RTAS_SP(r1)
+ cmpwi cr1, r1, 0
+ bne cr1, 7f
+ mfspr r1, SPRN_SPRG_SCRATCH2
+#endif /* CONFIG_PPC_CHRP */
+ EXCEPTION_PROLOG_1
+7: EXCEPTION_PROLOG_2 0x200 MachineCheck
+#ifdef CONFIG_PPC_CHRP
+ beq cr1, 1f
+ twi 31, 0, 0
+#endif
+1: prepare_transfer_to_handler
+ bl machine_check_exception
+ b interrupt_return
+
+/* Data access exception. */
+ START_EXCEPTION(INTERRUPT_DATA_STORAGE, DataAccess)
+#ifdef CONFIG_PPC_BOOK3S_604
+BEGIN_MMU_FTR_SECTION
+ mtspr SPRN_SPRG_SCRATCH2,r10
+ mfspr r10, SPRN_SPRG_THREAD
+ stw r11, THR11(r10)
+ mfspr r10, SPRN_DSISR
+ mfcr r11
+ andis. r10, r10, (DSISR_BAD_FAULT_32S | DSISR_DABRMATCH)@h
+ mfspr r10, SPRN_SPRG_THREAD
+ beq hash_page_dsi
+.Lhash_page_dsi_cont:
+ mtcr r11
+ lwz r11, THR11(r10)
+ mfspr r10, SPRN_SPRG_SCRATCH2
+MMU_FTR_SECTION_ELSE
+ b 1f
+ALT_MMU_FTR_SECTION_END_IFSET(MMU_FTR_HPTE_TABLE)
+#endif
+1: EXCEPTION_PROLOG_0 handle_dar_dsisr=1
+ EXCEPTION_PROLOG_1
+ EXCEPTION_PROLOG_2 INTERRUPT_DATA_STORAGE DataAccess handle_dar_dsisr=1
+ prepare_transfer_to_handler
+ lwz r5, _DSISR(r1)
+ andis. r0, r5, DSISR_DABRMATCH@h
+ bne- 1f
+ bl do_page_fault
+ b interrupt_return
+1: bl do_break
+ REST_NVGPRS(r1)
+ b interrupt_return
+
+
+/* Instruction access exception. */
+ START_EXCEPTION(INTERRUPT_INST_STORAGE, InstructionAccess)
+ mtspr SPRN_SPRG_SCRATCH0,r10
+ mtspr SPRN_SPRG_SCRATCH1,r11
+ mfspr r10, SPRN_SPRG_THREAD
+ mfspr r11, SPRN_SRR0
+ stw r11, SRR0(r10)
+ mfspr r11, SPRN_SRR1 /* check whether user or kernel */
+ stw r11, SRR1(r10)
+ mfcr r10
+#ifdef CONFIG_PPC_BOOK3S_604
+BEGIN_MMU_FTR_SECTION
+ andis. r11, r11, SRR1_ISI_NOPT@h /* no pte found? */
+ bne hash_page_isi
+.Lhash_page_isi_cont:
+ mfspr r11, SPRN_SRR1 /* check whether user or kernel */
+END_MMU_FTR_SECTION_IFSET(MMU_FTR_HPTE_TABLE)
+#endif
+ andi. r11, r11, MSR_PR
+
+ EXCEPTION_PROLOG_1
+ EXCEPTION_PROLOG_2 INTERRUPT_INST_STORAGE InstructionAccess
+ andis. r5,r9,DSISR_SRR1_MATCH_32S@h /* Filter relevant SRR1 bits */
+ stw r5, _DSISR(r11)
+ stw r12, _DAR(r11)
+ prepare_transfer_to_handler
+ bl do_page_fault
+ b interrupt_return
+
+/* External interrupt */
+ EXCEPTION(INTERRUPT_EXTERNAL, HardwareInterrupt, do_IRQ)
+
+/* Alignment exception */
+ START_EXCEPTION(INTERRUPT_ALIGNMENT, Alignment)
+ EXCEPTION_PROLOG INTERRUPT_ALIGNMENT Alignment handle_dar_dsisr=1
+ prepare_transfer_to_handler
+ bl alignment_exception
+ REST_NVGPRS(r1)
+ b interrupt_return
+
+/* Program check exception */
+ START_EXCEPTION(INTERRUPT_PROGRAM, ProgramCheck)
+ EXCEPTION_PROLOG INTERRUPT_PROGRAM ProgramCheck
+ prepare_transfer_to_handler
+ bl program_check_exception
+ REST_NVGPRS(r1)
+ b interrupt_return
+
+/* Floating-point unavailable */
+ START_EXCEPTION(0x800, FPUnavailable)
+#ifdef CONFIG_PPC_FPU
+BEGIN_FTR_SECTION
+/*
+ * Certain Freescale cores don't have a FPU and treat fp instructions
+ * as a FP Unavailable exception. Redirect to illegal/emulation handling.
+ */
+ b ProgramCheck
+END_FTR_SECTION_IFSET(CPU_FTR_FPU_UNAVAILABLE)
+ EXCEPTION_PROLOG INTERRUPT_FP_UNAVAIL FPUnavailable
+ beq 1f
+ bl load_up_fpu /* if from user, just load it up */
+ b fast_exception_return
+1: prepare_transfer_to_handler
+ bl kernel_fp_unavailable_exception
+ b interrupt_return
+#else
+ b ProgramCheck
+#endif
+
+/* Decrementer */
+ EXCEPTION(INTERRUPT_DECREMENTER, Decrementer, timer_interrupt)
+
+ EXCEPTION(0xa00, Trap_0a, unknown_exception)
+ EXCEPTION(0xb00, Trap_0b, unknown_exception)
+
+/* System call */
+ START_EXCEPTION(INTERRUPT_SYSCALL, SystemCall)
+ SYSCALL_ENTRY INTERRUPT_SYSCALL
+
+ EXCEPTION(INTERRUPT_TRACE, SingleStep, single_step_exception)
+ EXCEPTION(0xe00, Trap_0e, unknown_exception)
+
+/*
+ * The Altivec unavailable trap is at 0x0f20. Foo.
+ * We effectively remap it to 0x3000.
+ * We include an altivec unavailable exception vector even if
+ * not configured for Altivec, so that you can't panic a
+ * non-altivec kernel running on a machine with altivec just
+ * by executing an altivec instruction.
+ */
+ START_EXCEPTION(INTERRUPT_PERFMON, PerformanceMonitorTrap)
+ b PerformanceMonitor
+
+ START_EXCEPTION(INTERRUPT_ALTIVEC_UNAVAIL, AltiVecUnavailableTrap)
+ b AltiVecUnavailable
+
+ __HEAD
+/*
+ * Handle TLB miss for instruction on 603/603e.
+ * Note: we get an alternate set of r0 - r3 to use automatically.
+ */
+ . = INTERRUPT_INST_TLB_MISS_603
+InstructionTLBMiss:
+/*
+ * r0: scratch
+ * r1: linux style pte ( later becomes ppc hardware pte )
+ * r2: ptr to linux-style pte
+ * r3: scratch
+ */
+ /* Get PTE (linux-style) and check access */
+ mfspr r3,SPRN_IMISS
+#ifdef CONFIG_MODULES
+ lis r1, TASK_SIZE@h /* check if kernel address */
+ cmplw 0,r1,r3
+#endif
+ mfspr r2, SPRN_SDR1
+ li r1,_PAGE_PRESENT | _PAGE_ACCESSED | _PAGE_EXEC | _PAGE_USER
+ rlwinm r2, r2, 28, 0xfffff000
+#ifdef CONFIG_MODULES
+ bgt- 112f
+ lis r2, (swapper_pg_dir - PAGE_OFFSET)@ha /* if kernel address, use */
+ li r1,_PAGE_PRESENT | _PAGE_ACCESSED | _PAGE_EXEC
+ addi r2, r2, (swapper_pg_dir - PAGE_OFFSET)@l /* kernel page table */
+#endif
+112: rlwimi r2,r3,12,20,29 /* insert top 10 bits of address */
+ lwz r2,0(r2) /* get pmd entry */
+ rlwinm. r2,r2,0,0,19 /* extract address of pte page */
+ beq- InstructionAddressInvalid /* return if no mapping */
+ rlwimi r2,r3,22,20,29 /* insert next 10 bits of address */
+ lwz r0,0(r2) /* get linux-style pte */
+ andc. r1,r1,r0 /* check access & ~permission */
+ bne- InstructionAddressInvalid /* return if access not permitted */
+ /* Convert linux-style PTE to low word of PPC-style PTE */
+ rlwimi r0,r0,32-2,31,31 /* _PAGE_USER -> PP lsb */
+ ori r1, r1, 0xe06 /* clear out reserved bits */
+ andc r1, r0, r1 /* PP = user? 1 : 0 */
+BEGIN_FTR_SECTION
+ rlwinm r1,r1,0,~_PAGE_COHERENT /* clear M (coherence not required) */
+END_FTR_SECTION_IFCLR(CPU_FTR_NEED_COHERENT)
+ mtspr SPRN_RPA,r1
+ tlbli r3
+ mfspr r3,SPRN_SRR1 /* Need to restore CR0 */
+ mtcrf 0x80,r3
+ rfi
+InstructionAddressInvalid:
+ mfspr r3,SPRN_SRR1
+ rlwinm r1,r3,9,6,6 /* Get load/store bit */
+
+ addis r1,r1,0x2000
+ mtspr SPRN_DSISR,r1 /* (shouldn't be needed) */
+ andi. r2,r3,0xFFFF /* Clear upper bits of SRR1 */
+ or r2,r2,r1
+ mtspr SPRN_SRR1,r2
+ mfspr r1,SPRN_IMISS /* Get failing address */
+ rlwinm. r2,r2,0,31,31 /* Check for little endian access */
+ rlwimi r2,r2,1,30,30 /* change 1 -> 3 */
+ xor r1,r1,r2
+ mtspr SPRN_DAR,r1 /* Set fault address */
+ mfmsr r0 /* Restore "normal" registers */
+ xoris r0,r0,MSR_TGPR>>16
+ mtcrf 0x80,r3 /* Restore CR0 */
+ mtmsr r0
+ b InstructionAccess
+
+/*
+ * Handle TLB miss for DATA Load operation on 603/603e
+ */
+ . = INTERRUPT_DATA_LOAD_TLB_MISS_603
+DataLoadTLBMiss:
+/*
+ * r0: scratch
+ * r1: linux style pte ( later becomes ppc hardware pte )
+ * r2: ptr to linux-style pte
+ * r3: scratch
+ */
+ /* Get PTE (linux-style) and check access */
+ mfspr r3,SPRN_DMISS
+ lis r1, TASK_SIZE@h /* check if kernel address */
+ cmplw 0,r1,r3
+ mfspr r2, SPRN_SDR1
+ li r1, _PAGE_PRESENT | _PAGE_ACCESSED | _PAGE_USER
+ rlwinm r2, r2, 28, 0xfffff000
+ bgt- 112f
+ lis r2, (swapper_pg_dir - PAGE_OFFSET)@ha /* if kernel address, use */
+ li r1, _PAGE_PRESENT | _PAGE_ACCESSED
+ addi r2, r2, (swapper_pg_dir - PAGE_OFFSET)@l /* kernel page table */
+112: rlwimi r2,r3,12,20,29 /* insert top 10 bits of address */
+ lwz r2,0(r2) /* get pmd entry */
+ rlwinm. r2,r2,0,0,19 /* extract address of pte page */
+ beq- DataAddressInvalid /* return if no mapping */
+ rlwimi r2,r3,22,20,29 /* insert next 10 bits of address */
+ lwz r0,0(r2) /* get linux-style pte */
+ andc. r1,r1,r0 /* check access & ~permission */
+ bne- DataAddressInvalid /* return if access not permitted */
+ /* Convert linux-style PTE to low word of PPC-style PTE */
+ rlwinm r1,r0,32-9,30,30 /* _PAGE_RW -> PP msb */
+ rlwimi r0,r0,32-1,30,30 /* _PAGE_USER -> PP msb */
+ rlwimi r1,r0,32-3,24,24 /* _PAGE_RW -> _PAGE_DIRTY */
+ rlwimi r0,r0,32-1,31,31 /* _PAGE_USER -> PP lsb */
+ xori r1,r1,_PAGE_DIRTY /* clear dirty when not rw */
+ ori r1,r1,0xe04 /* clear out reserved bits */
+ andc r1,r0,r1 /* PP = user? rw? 1: 3: 0 */
+BEGIN_FTR_SECTION
+ rlwinm r1,r1,0,~_PAGE_COHERENT /* clear M (coherence not required) */
+END_FTR_SECTION_IFCLR(CPU_FTR_NEED_COHERENT)
+ mtspr SPRN_RPA,r1
+BEGIN_MMU_FTR_SECTION
+ li r0,1
+ mfspr r1,SPRN_SPRG_603_LRU
+ rlwinm r2,r3,20,27,31 /* Get Address bits 15:19 */
+ slw r0,r0,r2
+ xor r1,r0,r1
+ srw r0,r1,r2
+ mtspr SPRN_SPRG_603_LRU,r1
+ mfspr r2,SPRN_SRR1
+ rlwimi r2,r0,31-14,14,14
+ mtspr SPRN_SRR1,r2
+ mtcrf 0x80,r2
+ tlbld r3
+ rfi
+MMU_FTR_SECTION_ELSE
+ mfspr r2,SPRN_SRR1 /* Need to restore CR0 */
+ mtcrf 0x80,r2
+ tlbld r3
+ rfi
+ALT_MMU_FTR_SECTION_END_IFSET(MMU_FTR_NEED_DTLB_SW_LRU)
+DataAddressInvalid:
+ mfspr r3,SPRN_SRR1
+ rlwinm r1,r3,9,6,6 /* Get load/store bit */
+ addis r1,r1,0x2000
+ mtspr SPRN_DSISR,r1
+ andi. r2,r3,0xFFFF /* Clear upper bits of SRR1 */
+ mtspr SPRN_SRR1,r2
+ mfspr r1,SPRN_DMISS /* Get failing address */
+ rlwinm. r2,r2,0,31,31 /* Check for little endian access */
+ beq 20f /* Jump if big endian */
+ xori r1,r1,3
+20: mtspr SPRN_DAR,r1 /* Set fault address */
+ mfmsr r0 /* Restore "normal" registers */
+ xoris r0,r0,MSR_TGPR>>16
+ mtcrf 0x80,r3 /* Restore CR0 */
+ mtmsr r0
+ b DataAccess
+
+/*
+ * Handle TLB miss for DATA Store on 603/603e
+ */
+ . = INTERRUPT_DATA_STORE_TLB_MISS_603
+DataStoreTLBMiss:
+/*
+ * r0: scratch
+ * r1: linux style pte ( later becomes ppc hardware pte )
+ * r2: ptr to linux-style pte
+ * r3: scratch
+ */
+ /* Get PTE (linux-style) and check access */
+ mfspr r3,SPRN_DMISS
+ lis r1, TASK_SIZE@h /* check if kernel address */
+ cmplw 0,r1,r3
+ mfspr r2, SPRN_SDR1
+ li r1, _PAGE_RW | _PAGE_DIRTY | _PAGE_PRESENT | _PAGE_ACCESSED | _PAGE_USER
+ rlwinm r2, r2, 28, 0xfffff000
+ bgt- 112f
+ lis r2, (swapper_pg_dir - PAGE_OFFSET)@ha /* if kernel address, use */
+ li r1, _PAGE_RW | _PAGE_DIRTY | _PAGE_PRESENT | _PAGE_ACCESSED
+ addi r2, r2, (swapper_pg_dir - PAGE_OFFSET)@l /* kernel page table */
+112: rlwimi r2,r3,12,20,29 /* insert top 10 bits of address */
+ lwz r2,0(r2) /* get pmd entry */
+ rlwinm. r2,r2,0,0,19 /* extract address of pte page */
+ beq- DataAddressInvalid /* return if no mapping */
+ rlwimi r2,r3,22,20,29 /* insert next 10 bits of address */
+ lwz r0,0(r2) /* get linux-style pte */
+ andc. r1,r1,r0 /* check access & ~permission */
+ bne- DataAddressInvalid /* return if access not permitted */
+ /* Convert linux-style PTE to low word of PPC-style PTE */
+ rlwimi r0,r0,32-2,31,31 /* _PAGE_USER -> PP lsb */
+ li r1,0xe06 /* clear out reserved bits & PP msb */
+ andc r1,r0,r1 /* PP = user? 1: 0 */
+BEGIN_FTR_SECTION
+ rlwinm r1,r1,0,~_PAGE_COHERENT /* clear M (coherence not required) */
+END_FTR_SECTION_IFCLR(CPU_FTR_NEED_COHERENT)
+ mtspr SPRN_RPA,r1
+ mfspr r2,SPRN_SRR1 /* Need to restore CR0 */
+ mtcrf 0x80,r2
+BEGIN_MMU_FTR_SECTION
+ li r0,1
+ mfspr r1,SPRN_SPRG_603_LRU
+ rlwinm r2,r3,20,27,31 /* Get Address bits 15:19 */
+ slw r0,r0,r2
+ xor r1,r0,r1
+ srw r0,r1,r2
+ mtspr SPRN_SPRG_603_LRU,r1
+ mfspr r2,SPRN_SRR1
+ rlwimi r2,r0,31-14,14,14
+ mtspr SPRN_SRR1,r2
+ mtcrf 0x80,r2
+ tlbld r3
+ rfi
+MMU_FTR_SECTION_ELSE
+ mfspr r2,SPRN_SRR1 /* Need to restore CR0 */
+ mtcrf 0x80,r2
+ tlbld r3
+ rfi
+ALT_MMU_FTR_SECTION_END_IFSET(MMU_FTR_NEED_DTLB_SW_LRU)
+
+#ifndef CONFIG_ALTIVEC
+#define altivec_assist_exception unknown_exception
+#endif
+
+#ifndef CONFIG_TAU_INT
+#define TAUException unknown_async_exception
+#endif
+
+ EXCEPTION(0x1300, Trap_13, instruction_breakpoint_exception)
+ EXCEPTION(0x1400, SMI, SMIException)
+ EXCEPTION(0x1500, Trap_15, unknown_exception)
+ EXCEPTION(0x1600, Trap_16, altivec_assist_exception)
+ EXCEPTION(0x1700, Trap_17, TAUException)
+ EXCEPTION(0x1800, Trap_18, unknown_exception)
+ EXCEPTION(0x1900, Trap_19, unknown_exception)
+ EXCEPTION(0x1a00, Trap_1a, unknown_exception)
+ EXCEPTION(0x1b00, Trap_1b, unknown_exception)
+ EXCEPTION(0x1c00, Trap_1c, unknown_exception)
+ EXCEPTION(0x1d00, Trap_1d, unknown_exception)
+ EXCEPTION(0x1e00, Trap_1e, unknown_exception)
+ EXCEPTION(0x1f00, Trap_1f, unknown_exception)
+ EXCEPTION(0x2000, RunMode, RunModeException)
+ EXCEPTION(0x2100, Trap_21, unknown_exception)
+ EXCEPTION(0x2200, Trap_22, unknown_exception)
+ EXCEPTION(0x2300, Trap_23, unknown_exception)
+ EXCEPTION(0x2400, Trap_24, unknown_exception)
+ EXCEPTION(0x2500, Trap_25, unknown_exception)
+ EXCEPTION(0x2600, Trap_26, unknown_exception)
+ EXCEPTION(0x2700, Trap_27, unknown_exception)
+ EXCEPTION(0x2800, Trap_28, unknown_exception)
+ EXCEPTION(0x2900, Trap_29, unknown_exception)
+ EXCEPTION(0x2a00, Trap_2a, unknown_exception)
+ EXCEPTION(0x2b00, Trap_2b, unknown_exception)
+ EXCEPTION(0x2c00, Trap_2c, unknown_exception)
+ EXCEPTION(0x2d00, Trap_2d, unknown_exception)
+ EXCEPTION(0x2e00, Trap_2e, unknown_exception)
+ EXCEPTION(0x2f00, Trap_2f, unknown_exception)
+
+ __HEAD
+ . = 0x3000
+
+#ifdef CONFIG_PPC_BOOK3S_604
+.macro save_regs_thread thread
+ stw r0, THR0(\thread)
+ stw r3, THR3(\thread)
+ stw r4, THR4(\thread)
+ stw r5, THR5(\thread)
+ stw r6, THR6(\thread)
+ stw r8, THR8(\thread)
+ stw r9, THR9(\thread)
+ mflr r0
+ stw r0, THLR(\thread)
+ mfctr r0
+ stw r0, THCTR(\thread)
+.endm
+
+.macro restore_regs_thread thread
+ lwz r0, THLR(\thread)
+ mtlr r0
+ lwz r0, THCTR(\thread)
+ mtctr r0
+ lwz r0, THR0(\thread)
+ lwz r3, THR3(\thread)
+ lwz r4, THR4(\thread)
+ lwz r5, THR5(\thread)
+ lwz r6, THR6(\thread)
+ lwz r8, THR8(\thread)
+ lwz r9, THR9(\thread)
+.endm
+
+hash_page_dsi:
+ save_regs_thread r10
+ mfdsisr r3
+ mfdar r4
+ mfsrr0 r5
+ mfsrr1 r9
+ rlwinm r3, r3, 32 - 15, _PAGE_RW /* DSISR_STORE -> _PAGE_RW */
+ bl hash_page
+ mfspr r10, SPRN_SPRG_THREAD
+ restore_regs_thread r10
+ b .Lhash_page_dsi_cont
+
+hash_page_isi:
+ mr r11, r10
+ mfspr r10, SPRN_SPRG_THREAD
+ save_regs_thread r10
+ li r3, 0
+ lwz r4, SRR0(r10)
+ lwz r9, SRR1(r10)
+ bl hash_page
+ mfspr r10, SPRN_SPRG_THREAD
+ restore_regs_thread r10
+ mr r10, r11
+ b .Lhash_page_isi_cont
+
+ .globl fast_hash_page_return
+fast_hash_page_return:
+ andis. r10, r9, SRR1_ISI_NOPT@h /* Set on ISI, cleared on DSI */
+ mfspr r10, SPRN_SPRG_THREAD
+ restore_regs_thread r10
+ bne 1f
+
+ /* DSI */
+ mtcr r11
+ lwz r11, THR11(r10)
+ mfspr r10, SPRN_SPRG_SCRATCH2
+ rfi
+
+1: /* ISI */
+ mtcr r11
+ mfspr r11, SPRN_SPRG_SCRATCH1
+ mfspr r10, SPRN_SPRG_SCRATCH0
+ rfi
+#endif /* CONFIG_PPC_BOOK3S_604 */
+
+#ifdef CONFIG_VMAP_STACK
+ vmap_stack_overflow_exception
+#endif
+
+ __HEAD
+AltiVecUnavailable:
+ EXCEPTION_PROLOG 0xf20 AltiVecUnavailable
+#ifdef CONFIG_ALTIVEC
+ beq 1f
+ bl load_up_altivec /* if from user, just load it up */
+ b fast_exception_return
+#endif /* CONFIG_ALTIVEC */
+1: prepare_transfer_to_handler
+ bl altivec_unavailable_exception
+ b interrupt_return
+
+ __HEAD
+PerformanceMonitor:
+ EXCEPTION_PROLOG 0xf00 PerformanceMonitor
+ prepare_transfer_to_handler
+ bl performance_monitor_exception
+ b interrupt_return
+
+
+ __HEAD
+/*
+ * This code is jumped to from the startup code to copy
+ * the kernel image to physical address PHYSICAL_START.
+ */
+relocate_kernel:
+ lis r3,PHYSICAL_START@h /* Destination base address */
+ li r6,0 /* Destination offset */
+ li r5,0x4000 /* # bytes of memory to copy */
+ bl copy_and_flush /* copy the first 0x4000 bytes */
+ addi r0,r3,4f@l /* jump to the address of 4f */
+ mtctr r0 /* in copy and do the rest. */
+ bctr /* jump to the copy */
+4: lis r5,_end-KERNELBASE@h
+ ori r5,r5,_end-KERNELBASE@l
+ bl copy_and_flush /* copy the rest */
+ b turn_on_mmu
+
+/*
+ * Copy routine used to copy the kernel to start at physical address 0
+ * and flush and invalidate the caches as needed.
+ * r3 = dest addr, r4 = source addr, r5 = copy limit, r6 = start offset
+ * on exit, r3, r4, r5 are unchanged, r6 is updated to be >= r5.
+ */
+_GLOBAL(copy_and_flush)
+ addi r5,r5,-4
+ addi r6,r6,-4
+4: li r0,L1_CACHE_BYTES/4
+ mtctr r0
+3: addi r6,r6,4 /* copy a cache line */
+ lwzx r0,r6,r4
+ stwx r0,r6,r3
+ bdnz 3b
+ dcbst r6,r3 /* write it to memory */
+ sync
+ icbi r6,r3 /* flush the icache line */
+ cmplw 0,r6,r5
+ blt 4b
+ sync /* additional sync needed on g4 */
+ isync
+ addi r5,r5,4
+ addi r6,r6,4
+ blr
+
+#ifdef CONFIG_SMP
+ .globl __secondary_start_mpc86xx
+__secondary_start_mpc86xx:
+ mfspr r3, SPRN_PIR
+ stw r3, __secondary_hold_acknowledge@l(0)
+ mr r24, r3 /* cpu # */
+ b __secondary_start
+
+ .globl __secondary_start_pmac_0
+__secondary_start_pmac_0:
+ /* NB the entries for cpus 0, 1, 2 must each occupy 8 bytes. */
+ li r24,0
+ b 1f
+ li r24,1
+ b 1f
+ li r24,2
+ b 1f
+ li r24,3
+1:
+ /* on powersurge, we come in here with IR=0 and DR=1, and DBAT 0
+ set to map the 0xf0000000 - 0xffffffff region */
+ mfmsr r0
+ rlwinm r0,r0,0,28,26 /* clear DR (0x10) */
+ mtmsr r0
+ isync
+
+ .globl __secondary_start
+__secondary_start:
+ /* Copy some CPU settings from CPU 0 */
+ bl __restore_cpu_setup
+
+ lis r3,-KERNELBASE@h
+ mr r4,r24
+ bl call_setup_cpu /* Call setup_cpu for this CPU */
+ lis r3,-KERNELBASE@h
+ bl init_idle_6xx
+
+ /* get current's stack and current */
+ lis r2,secondary_current@ha
+ tophys(r2,r2)
+ lwz r2,secondary_current@l(r2)
+ tophys(r1,r2)
+ lwz r1,TASK_STACK(r1)
+
+ /* stack */
+ addi r1,r1,THREAD_SIZE-STACK_FRAME_OVERHEAD
+ li r0,0
+ tophys(r3,r1)
+ stw r0,0(r3)
+
+ /* load up the MMU */
+ bl load_segment_registers
+ bl load_up_mmu
+
+ /* ptr to phys current thread */
+ tophys(r4,r2)
+ addi r4,r4,THREAD /* phys address of our thread_struct */
+ mtspr SPRN_SPRG_THREAD,r4
+BEGIN_MMU_FTR_SECTION
+ lis r4, (swapper_pg_dir - PAGE_OFFSET)@h
+ ori r4, r4, (swapper_pg_dir - PAGE_OFFSET)@l
+ rlwinm r4, r4, 4, 0xffff01ff
+ mtspr SPRN_SDR1, r4
+END_MMU_FTR_SECTION_IFCLR(MMU_FTR_HPTE_TABLE)
+
+ /* enable MMU and jump to start_secondary */
+ li r4,MSR_KERNEL
+ lis r3,start_secondary@h
+ ori r3,r3,start_secondary@l
+ mtspr SPRN_SRR0,r3
+ mtspr SPRN_SRR1,r4
+ rfi
+#endif /* CONFIG_SMP */
+
+#ifdef CONFIG_KVM_BOOK3S_HANDLER
+#include "../kvm/book3s_rmhandlers.S"
+#endif
+
+/*
+ * Load stuff into the MMU. Intended to be called with
+ * IR=0 and DR=0.
+ */
+early_hash_table:
+ sync /* Force all PTE updates to finish */
+ isync
+ tlbia /* Clear all TLB entries */
+ sync /* wait for tlbia/tlbie to finish */
+ TLBSYNC /* ... on all CPUs */
+ /* Load the SDR1 register (hash table base & size) */
+ lis r6, early_hash - PAGE_OFFSET@h
+ ori r6, r6, 3 /* 256kB table */
+ mtspr SPRN_SDR1, r6
+ blr
+
+load_up_mmu:
+ sync /* Force all PTE updates to finish */
+ isync
+ tlbia /* Clear all TLB entries */
+ sync /* wait for tlbia/tlbie to finish */
+ TLBSYNC /* ... on all CPUs */
+BEGIN_MMU_FTR_SECTION
+ /* Load the SDR1 register (hash table base & size) */
+ lis r6,_SDR1@ha
+ tophys(r6,r6)
+ lwz r6,_SDR1@l(r6)
+ mtspr SPRN_SDR1,r6
+END_MMU_FTR_SECTION_IFSET(MMU_FTR_HPTE_TABLE)
+
+/* Load the BAT registers with the values set up by MMU_init. */
+ lis r3,BATS@ha
+ addi r3,r3,BATS@l
+ tophys(r3,r3)
+ LOAD_BAT(0,r3,r4,r5)
+ LOAD_BAT(1,r3,r4,r5)
+ LOAD_BAT(2,r3,r4,r5)
+ LOAD_BAT(3,r3,r4,r5)
+BEGIN_MMU_FTR_SECTION
+ LOAD_BAT(4,r3,r4,r5)
+ LOAD_BAT(5,r3,r4,r5)
+ LOAD_BAT(6,r3,r4,r5)
+ LOAD_BAT(7,r3,r4,r5)
+END_MMU_FTR_SECTION_IFSET(MMU_FTR_USE_HIGH_BATS)
+ blr
+
+_GLOBAL(load_segment_registers)
+ li r0, NUM_USER_SEGMENTS /* load up user segment register values */
+ mtctr r0 /* for context 0 */
+#ifdef CONFIG_PPC_KUEP
+ lis r3, SR_NX@h /* Kp = 0, Ks = 0, VSID = 0 */
+#else
+ li r3, 0 /* Kp = 0, Ks = 0, VSID = 0 */
+#endif
+ li r4, 0
+3: mtsrin r3, r4
+ addi r3, r3, 0x111 /* increment VSID */
+ addis r4, r4, 0x1000 /* address of next segment */
+ bdnz 3b
+ li r0, 16 - NUM_USER_SEGMENTS /* load up kernel segment registers */
+ mtctr r0 /* for context 0 */
+ rlwinm r3, r3, 0, ~SR_NX /* Nx = 0 */
+ rlwinm r3, r3, 0, ~SR_KS /* Ks = 0 */
+ oris r3, r3, SR_KP@h /* Kp = 1 */
+3: mtsrin r3, r4
+ addi r3, r3, 0x111 /* increment VSID */
+ addis r4, r4, 0x1000 /* address of next segment */
+ bdnz 3b
+ blr
+
+/*
+ * This is where the main kernel code starts.
+ */
+start_here:
+ /* ptr to current */
+ lis r2,init_task@h
+ ori r2,r2,init_task@l
+ /* Set up for using our exception vectors */
+ /* ptr to phys current thread */
+ tophys(r4,r2)
+ addi r4,r4,THREAD /* init task's THREAD */
+ mtspr SPRN_SPRG_THREAD,r4
+BEGIN_MMU_FTR_SECTION
+ lis r4, (swapper_pg_dir - PAGE_OFFSET)@h
+ ori r4, r4, (swapper_pg_dir - PAGE_OFFSET)@l
+ rlwinm r4, r4, 4, 0xffff01ff
+ mtspr SPRN_SDR1, r4
+END_MMU_FTR_SECTION_IFCLR(MMU_FTR_HPTE_TABLE)
+
+ /* stack */
+ lis r1,init_thread_union@ha
+ addi r1,r1,init_thread_union@l
+ li r0,0
+ stwu r0,THREAD_SIZE-STACK_FRAME_OVERHEAD(r1)
+/*
+ * Do early platform-specific initialization,
+ * and set up the MMU.
+ */
+#ifdef CONFIG_KASAN
+ bl kasan_early_init
+#endif
+ li r3,0
+ mr r4,r31
+ bl machine_init
+ bl __save_cpu_setup
+ bl MMU_init
+ bl MMU_init_hw_patch
+
+/*
+ * Go back to running unmapped so we can load up new values
+ * for SDR1 (hash table pointer) and the segment registers
+ * and change to using our exception vectors.
+ */
+ lis r4,2f@h
+ ori r4,r4,2f@l
+ tophys(r4,r4)
+ li r3,MSR_KERNEL & ~(MSR_IR|MSR_DR)
+
+ .align 4
+ mtspr SPRN_SRR0,r4
+ mtspr SPRN_SRR1,r3
+ rfi
+/* Load up the kernel context */
+2: bl load_up_mmu
+
+#ifdef CONFIG_BDI_SWITCH
+ /* Add helper information for the Abatron bdiGDB debugger.
+ * We do this here because we know the mmu is disabled, and
+ * will be enabled for real in just a few instructions.
+ */
+ lis r5, abatron_pteptrs@h
+ ori r5, r5, abatron_pteptrs@l
+ stw r5, 0xf0(0) /* This much match your Abatron config */
+ lis r6, swapper_pg_dir@h
+ ori r6, r6, swapper_pg_dir@l
+ tophys(r5, r5)
+ stw r6, 0(r5)
+#endif /* CONFIG_BDI_SWITCH */
+
+/* Now turn on the MMU for real! */
+ li r4,MSR_KERNEL
+ lis r3,start_kernel@h
+ ori r3,r3,start_kernel@l
+ mtspr SPRN_SRR0,r3
+ mtspr SPRN_SRR1,r4
+ rfi
+
+/*
+ * An undocumented "feature" of 604e requires that the v bit
+ * be cleared before changing BAT values.
+ *
+ * Also, newer IBM firmware does not clear bat3 and 4 so
+ * this makes sure it's done.
+ * -- Cort
+ */
+clear_bats:
+ li r10,0
+
+ mtspr SPRN_DBAT0U,r10
+ mtspr SPRN_DBAT0L,r10
+ mtspr SPRN_DBAT1U,r10
+ mtspr SPRN_DBAT1L,r10
+ mtspr SPRN_DBAT2U,r10
+ mtspr SPRN_DBAT2L,r10
+ mtspr SPRN_DBAT3U,r10
+ mtspr SPRN_DBAT3L,r10
+ mtspr SPRN_IBAT0U,r10
+ mtspr SPRN_IBAT0L,r10
+ mtspr SPRN_IBAT1U,r10
+ mtspr SPRN_IBAT1L,r10
+ mtspr SPRN_IBAT2U,r10
+ mtspr SPRN_IBAT2L,r10
+ mtspr SPRN_IBAT3U,r10
+ mtspr SPRN_IBAT3L,r10
+BEGIN_MMU_FTR_SECTION
+ /* Here's a tweak: at this point, CPU setup have
+ * not been called yet, so HIGH_BAT_EN may not be
+ * set in HID0 for the 745x processors. However, it
+ * seems that doesn't affect our ability to actually
+ * write to these SPRs.
+ */
+ mtspr SPRN_DBAT4U,r10
+ mtspr SPRN_DBAT4L,r10
+ mtspr SPRN_DBAT5U,r10
+ mtspr SPRN_DBAT5L,r10
+ mtspr SPRN_DBAT6U,r10
+ mtspr SPRN_DBAT6L,r10
+ mtspr SPRN_DBAT7U,r10
+ mtspr SPRN_DBAT7L,r10
+ mtspr SPRN_IBAT4U,r10
+ mtspr SPRN_IBAT4L,r10
+ mtspr SPRN_IBAT5U,r10
+ mtspr SPRN_IBAT5L,r10
+ mtspr SPRN_IBAT6U,r10
+ mtspr SPRN_IBAT6L,r10
+ mtspr SPRN_IBAT7U,r10
+ mtspr SPRN_IBAT7L,r10
+END_MMU_FTR_SECTION_IFSET(MMU_FTR_USE_HIGH_BATS)
+ blr
+
+_GLOBAL(update_bats)
+ lis r4, 1f@h
+ ori r4, r4, 1f@l
+ tophys(r4, r4)
+ mfmsr r6
+ mflr r7
+ li r3, MSR_KERNEL & ~(MSR_IR | MSR_DR)
+ rlwinm r0, r6, 0, ~MSR_RI
+ rlwinm r0, r0, 0, ~MSR_EE
+ mtmsr r0
+
+ .align 4
+ mtspr SPRN_SRR0, r4
+ mtspr SPRN_SRR1, r3
+ rfi
+1: bl clear_bats
+ lis r3, BATS@ha
+ addi r3, r3, BATS@l
+ tophys(r3, r3)
+ LOAD_BAT(0, r3, r4, r5)
+ LOAD_BAT(1, r3, r4, r5)
+ LOAD_BAT(2, r3, r4, r5)
+ LOAD_BAT(3, r3, r4, r5)
+BEGIN_MMU_FTR_SECTION
+ LOAD_BAT(4, r3, r4, r5)
+ LOAD_BAT(5, r3, r4, r5)
+ LOAD_BAT(6, r3, r4, r5)
+ LOAD_BAT(7, r3, r4, r5)
+END_MMU_FTR_SECTION_IFSET(MMU_FTR_USE_HIGH_BATS)
+ li r3, MSR_KERNEL & ~(MSR_IR | MSR_DR | MSR_RI)
+ mtmsr r3
+ mtspr SPRN_SRR0, r7
+ mtspr SPRN_SRR1, r6
+ rfi
+
+flush_tlbs:
+ lis r10, 0x40
+1: addic. r10, r10, -0x1000
+ tlbie r10
+ bgt 1b
+ sync
+ blr
+
+mmu_off:
+ addi r4, r3, __after_mmu_off - _start
+ mfmsr r3
+ andi. r0,r3,MSR_DR|MSR_IR /* MMU enabled? */
+ beqlr
+ andc r3,r3,r0
+
+ .align 4
+ mtspr SPRN_SRR0,r4
+ mtspr SPRN_SRR1,r3
+ sync
+ rfi
+
+/* We use one BAT to map up to 256M of RAM at _PAGE_OFFSET */
+initial_bats:
+ lis r11,PAGE_OFFSET@h
+ tophys(r8,r11)
+#ifdef CONFIG_SMP
+ ori r8,r8,0x12 /* R/W access, M=1 */
+#else
+ ori r8,r8,2 /* R/W access */
+#endif /* CONFIG_SMP */
+ ori r11,r11,BL_256M<<2|0x2 /* set up BAT registers for 604 */
+
+ mtspr SPRN_DBAT0L,r8 /* N.B. 6xx have valid */
+ mtspr SPRN_DBAT0U,r11 /* bit in upper BAT register */
+ mtspr SPRN_IBAT0L,r8
+ mtspr SPRN_IBAT0U,r11
+ isync
+ blr
+
+#ifdef CONFIG_BOOTX_TEXT
+setup_disp_bat:
+ /*
+ * setup the display bat prepared for us in prom.c
+ */
+ mflr r8
+ bl reloc_offset
+ mtlr r8
+ addis r8,r3,disp_BAT@ha
+ addi r8,r8,disp_BAT@l
+ cmpwi cr0,r8,0
+ beqlr
+ lwz r11,0(r8)
+ lwz r8,4(r8)
+ mtspr SPRN_DBAT3L,r8
+ mtspr SPRN_DBAT3U,r11
+ blr
+#endif /* CONFIG_BOOTX_TEXT */
+
+#ifdef CONFIG_PPC_EARLY_DEBUG_CPM
+setup_cpm_bat:
+ lis r8, 0xf000
+ ori r8, r8, 0x002a
+ mtspr SPRN_DBAT1L, r8
+
+ lis r11, 0xf000
+ ori r11, r11, (BL_1M << 2) | 2
+ mtspr SPRN_DBAT1U, r11
+
+ blr
+#endif
+
+#ifdef CONFIG_PPC_EARLY_DEBUG_USBGECKO
+setup_usbgecko_bat:
+ /* prepare a BAT for early io */
+#if defined(CONFIG_GAMECUBE)
+ lis r8, 0x0c00
+#elif defined(CONFIG_WII)
+ lis r8, 0x0d00
+#else
+#error Invalid platform for USB Gecko based early debugging.
+#endif
+ /*
+ * The virtual address used must match the virtual address
+ * associated to the fixmap entry FIX_EARLY_DEBUG_BASE.
+ */
+ lis r11, 0xfffe /* top 128K */
+ ori r8, r8, 0x002a /* uncached, guarded ,rw */
+ ori r11, r11, 0x2 /* 128K, Vs=1, Vp=0 */
+ mtspr SPRN_DBAT1L, r8
+ mtspr SPRN_DBAT1U, r11
+ blr
+#endif
+
+ .data