summaryrefslogtreecommitdiffstats
path: root/arch/powerpc/kernel/prom.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/powerpc/kernel/prom.c')
-rw-r--r--arch/powerpc/kernel/prom.c997
1 files changed, 997 insertions, 0 deletions
diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c
new file mode 100644
index 000000000..8537c354c
--- /dev/null
+++ b/arch/powerpc/kernel/prom.c
@@ -0,0 +1,997 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Procedures for creating, accessing and interpreting the device tree.
+ *
+ * Paul Mackerras August 1996.
+ * Copyright (C) 1996-2005 Paul Mackerras.
+ *
+ * Adapted for 64bit PowerPC by Dave Engebretsen and Peter Bergner.
+ * {engebret|bergner}@us.ibm.com
+ */
+
+#undef DEBUG
+
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/init.h>
+#include <linux/threads.h>
+#include <linux/spinlock.h>
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <linux/initrd.h>
+#include <linux/bitops.h>
+#include <linux/export.h>
+#include <linux/kexec.h>
+#include <linux/irq.h>
+#include <linux/memblock.h>
+#include <linux/of.h>
+#include <linux/of_fdt.h>
+#include <linux/libfdt.h>
+#include <linux/cpu.h>
+#include <linux/pgtable.h>
+#include <linux/seq_buf.h>
+
+#include <asm/rtas.h>
+#include <asm/page.h>
+#include <asm/processor.h>
+#include <asm/irq.h>
+#include <asm/io.h>
+#include <asm/kdump.h>
+#include <asm/smp.h>
+#include <asm/mmu.h>
+#include <asm/paca.h>
+#include <asm/powernv.h>
+#include <asm/iommu.h>
+#include <asm/btext.h>
+#include <asm/sections.h>
+#include <asm/setup.h>
+#include <asm/pci-bridge.h>
+#include <asm/kexec.h>
+#include <asm/opal.h>
+#include <asm/fadump.h>
+#include <asm/epapr_hcalls.h>
+#include <asm/firmware.h>
+#include <asm/dt_cpu_ftrs.h>
+#include <asm/drmem.h>
+#include <asm/ultravisor.h>
+#include <asm/prom.h>
+
+#include <mm/mmu_decl.h>
+
+#ifdef DEBUG
+#define DBG(fmt...) printk(KERN_ERR fmt)
+#else
+#define DBG(fmt...)
+#endif
+
+int *chip_id_lookup_table;
+
+#ifdef CONFIG_PPC64
+int __initdata iommu_is_off;
+int __initdata iommu_force_on;
+unsigned long tce_alloc_start, tce_alloc_end;
+u64 ppc64_rma_size;
+#endif
+static phys_addr_t first_memblock_size;
+static int __initdata boot_cpu_count;
+
+static int __init early_parse_mem(char *p)
+{
+ if (!p)
+ return 1;
+
+ memory_limit = PAGE_ALIGN(memparse(p, &p));
+ DBG("memory limit = 0x%llx\n", memory_limit);
+
+ return 0;
+}
+early_param("mem", early_parse_mem);
+
+/*
+ * overlaps_initrd - check for overlap with page aligned extension of
+ * initrd.
+ */
+static inline int overlaps_initrd(unsigned long start, unsigned long size)
+{
+#ifdef CONFIG_BLK_DEV_INITRD
+ if (!initrd_start)
+ return 0;
+
+ return (start + size) > ALIGN_DOWN(initrd_start, PAGE_SIZE) &&
+ start <= ALIGN(initrd_end, PAGE_SIZE);
+#else
+ return 0;
+#endif
+}
+
+/**
+ * move_device_tree - move tree to an unused area, if needed.
+ *
+ * The device tree may be allocated beyond our memory limit, or inside the
+ * crash kernel region for kdump, or within the page aligned range of initrd.
+ * If so, move it out of the way.
+ */
+static void __init move_device_tree(void)
+{
+ unsigned long start, size;
+ void *p;
+
+ DBG("-> move_device_tree\n");
+
+ start = __pa(initial_boot_params);
+ size = fdt_totalsize(initial_boot_params);
+
+ if ((memory_limit && (start + size) > PHYSICAL_START + memory_limit) ||
+ !memblock_is_memory(start + size - 1) ||
+ overlaps_crashkernel(start, size) || overlaps_initrd(start, size)) {
+ p = memblock_alloc_raw(size, PAGE_SIZE);
+ if (!p)
+ panic("Failed to allocate %lu bytes to move device tree\n",
+ size);
+ memcpy(p, initial_boot_params, size);
+ initial_boot_params = p;
+ DBG("Moved device tree to 0x%px\n", p);
+ }
+
+ DBG("<- move_device_tree\n");
+}
+
+/*
+ * ibm,pa/pi-features is a per-cpu property that contains a string of
+ * attribute descriptors, each of which has a 2 byte header plus up
+ * to 254 bytes worth of processor attribute bits. First header
+ * byte specifies the number of bytes following the header.
+ * Second header byte is an "attribute-specifier" type, of which
+ * zero is the only currently-defined value.
+ * Implementation: Pass in the byte and bit offset for the feature
+ * that we are interested in. The function will return -1 if the
+ * pa-features property is missing, or a 1/0 to indicate if the feature
+ * is supported/not supported. Note that the bit numbers are
+ * big-endian to match the definition in PAPR.
+ */
+struct ibm_feature {
+ unsigned long cpu_features; /* CPU_FTR_xxx bit */
+ unsigned long mmu_features; /* MMU_FTR_xxx bit */
+ unsigned int cpu_user_ftrs; /* PPC_FEATURE_xxx bit */
+ unsigned int cpu_user_ftrs2; /* PPC_FEATURE2_xxx bit */
+ unsigned char pabyte; /* byte number in ibm,pa/pi-features */
+ unsigned char pabit; /* bit number (big-endian) */
+ unsigned char invert; /* if 1, pa bit set => clear feature */
+};
+
+static struct ibm_feature ibm_pa_features[] __initdata = {
+ { .pabyte = 0, .pabit = 0, .cpu_user_ftrs = PPC_FEATURE_HAS_MMU },
+ { .pabyte = 0, .pabit = 1, .cpu_user_ftrs = PPC_FEATURE_HAS_FPU },
+ { .pabyte = 0, .pabit = 3, .cpu_features = CPU_FTR_CTRL },
+ { .pabyte = 0, .pabit = 6, .cpu_features = CPU_FTR_NOEXECUTE },
+ { .pabyte = 1, .pabit = 2, .mmu_features = MMU_FTR_CI_LARGE_PAGE },
+#ifdef CONFIG_PPC_RADIX_MMU
+ { .pabyte = 40, .pabit = 0, .mmu_features = MMU_FTR_TYPE_RADIX | MMU_FTR_GTSE },
+#endif
+ { .pabyte = 5, .pabit = 0, .cpu_features = CPU_FTR_REAL_LE,
+ .cpu_user_ftrs = PPC_FEATURE_TRUE_LE },
+ /*
+ * If the kernel doesn't support TM (ie CONFIG_PPC_TRANSACTIONAL_MEM=n),
+ * we don't want to turn on TM here, so we use the *_COMP versions
+ * which are 0 if the kernel doesn't support TM.
+ */
+ { .pabyte = 22, .pabit = 0, .cpu_features = CPU_FTR_TM_COMP,
+ .cpu_user_ftrs2 = PPC_FEATURE2_HTM_COMP | PPC_FEATURE2_HTM_NOSC_COMP },
+
+ { .pabyte = 64, .pabit = 0, .cpu_features = CPU_FTR_DAWR1 },
+};
+
+/*
+ * ibm,pi-features property provides the support of processor specific
+ * options not described in ibm,pa-features. Right now use byte 0, bit 3
+ * which indicates the occurrence of DSI interrupt when the paste operation
+ * on the suspended NX window.
+ */
+static struct ibm_feature ibm_pi_features[] __initdata = {
+ { .pabyte = 0, .pabit = 3, .mmu_features = MMU_FTR_NX_DSI },
+};
+
+static void __init scan_features(unsigned long node, const unsigned char *ftrs,
+ unsigned long tablelen,
+ struct ibm_feature *fp,
+ unsigned long ft_size)
+{
+ unsigned long i, len, bit;
+
+ /* find descriptor with type == 0 */
+ for (;;) {
+ if (tablelen < 3)
+ return;
+ len = 2 + ftrs[0];
+ if (tablelen < len)
+ return; /* descriptor 0 not found */
+ if (ftrs[1] == 0)
+ break;
+ tablelen -= len;
+ ftrs += len;
+ }
+
+ /* loop over bits we know about */
+ for (i = 0; i < ft_size; ++i, ++fp) {
+ if (fp->pabyte >= ftrs[0])
+ continue;
+ bit = (ftrs[2 + fp->pabyte] >> (7 - fp->pabit)) & 1;
+ if (bit ^ fp->invert) {
+ cur_cpu_spec->cpu_features |= fp->cpu_features;
+ cur_cpu_spec->cpu_user_features |= fp->cpu_user_ftrs;
+ cur_cpu_spec->cpu_user_features2 |= fp->cpu_user_ftrs2;
+ cur_cpu_spec->mmu_features |= fp->mmu_features;
+ } else {
+ cur_cpu_spec->cpu_features &= ~fp->cpu_features;
+ cur_cpu_spec->cpu_user_features &= ~fp->cpu_user_ftrs;
+ cur_cpu_spec->cpu_user_features2 &= ~fp->cpu_user_ftrs2;
+ cur_cpu_spec->mmu_features &= ~fp->mmu_features;
+ }
+ }
+}
+
+static void __init check_cpu_features(unsigned long node, char *name,
+ struct ibm_feature *fp,
+ unsigned long size)
+{
+ const unsigned char *pa_ftrs;
+ int tablelen;
+
+ pa_ftrs = of_get_flat_dt_prop(node, name, &tablelen);
+ if (pa_ftrs == NULL)
+ return;
+
+ scan_features(node, pa_ftrs, tablelen, fp, size);
+}
+
+#ifdef CONFIG_PPC_64S_HASH_MMU
+static void __init init_mmu_slb_size(unsigned long node)
+{
+ const __be32 *slb_size_ptr;
+
+ slb_size_ptr = of_get_flat_dt_prop(node, "slb-size", NULL) ? :
+ of_get_flat_dt_prop(node, "ibm,slb-size", NULL);
+
+ if (slb_size_ptr)
+ mmu_slb_size = be32_to_cpup(slb_size_ptr);
+}
+#else
+#define init_mmu_slb_size(node) do { } while(0)
+#endif
+
+static struct feature_property {
+ const char *name;
+ u32 min_value;
+ unsigned long cpu_feature;
+ unsigned long cpu_user_ftr;
+} feature_properties[] __initdata = {
+#ifdef CONFIG_ALTIVEC
+ {"altivec", 0, CPU_FTR_ALTIVEC, PPC_FEATURE_HAS_ALTIVEC},
+ {"ibm,vmx", 1, CPU_FTR_ALTIVEC, PPC_FEATURE_HAS_ALTIVEC},
+#endif /* CONFIG_ALTIVEC */
+#ifdef CONFIG_VSX
+ /* Yes, this _really_ is ibm,vmx == 2 to enable VSX */
+ {"ibm,vmx", 2, CPU_FTR_VSX, PPC_FEATURE_HAS_VSX},
+#endif /* CONFIG_VSX */
+#ifdef CONFIG_PPC64
+ {"ibm,dfp", 1, 0, PPC_FEATURE_HAS_DFP},
+ {"ibm,purr", 1, CPU_FTR_PURR, 0},
+ {"ibm,spurr", 1, CPU_FTR_SPURR, 0},
+#endif /* CONFIG_PPC64 */
+};
+
+#if defined(CONFIG_44x) && defined(CONFIG_PPC_FPU)
+static __init void identical_pvr_fixup(unsigned long node)
+{
+ unsigned int pvr;
+ const char *model = of_get_flat_dt_prop(node, "model", NULL);
+
+ /*
+ * Since 440GR(x)/440EP(x) processors have the same pvr,
+ * we check the node path and set bit 28 in the cur_cpu_spec
+ * pvr for EP(x) processor version. This bit is always 0 in
+ * the "real" pvr. Then we call identify_cpu again with
+ * the new logical pvr to enable FPU support.
+ */
+ if (model && strstr(model, "440EP")) {
+ pvr = cur_cpu_spec->pvr_value | 0x8;
+ identify_cpu(0, pvr);
+ DBG("Using logical pvr %x for %s\n", pvr, model);
+ }
+}
+#else
+#define identical_pvr_fixup(node) do { } while(0)
+#endif
+
+static void __init check_cpu_feature_properties(unsigned long node)
+{
+ int i;
+ struct feature_property *fp = feature_properties;
+ const __be32 *prop;
+
+ for (i = 0; i < (int)ARRAY_SIZE(feature_properties); ++i, ++fp) {
+ prop = of_get_flat_dt_prop(node, fp->name, NULL);
+ if (prop && be32_to_cpup(prop) >= fp->min_value) {
+ cur_cpu_spec->cpu_features |= fp->cpu_feature;
+ cur_cpu_spec->cpu_user_features |= fp->cpu_user_ftr;
+ }
+ }
+}
+
+static int __init early_init_dt_scan_cpus(unsigned long node,
+ const char *uname, int depth,
+ void *data)
+{
+ const char *type = of_get_flat_dt_prop(node, "device_type", NULL);
+ const __be32 *prop;
+ const __be32 *intserv;
+ int i, nthreads;
+ int len;
+ int found = -1;
+ int found_thread = 0;
+
+ /* We are scanning "cpu" nodes only */
+ if (type == NULL || strcmp(type, "cpu") != 0)
+ return 0;
+
+ /* Get physical cpuid */
+ intserv = of_get_flat_dt_prop(node, "ibm,ppc-interrupt-server#s", &len);
+ if (!intserv)
+ intserv = of_get_flat_dt_prop(node, "reg", &len);
+
+ nthreads = len / sizeof(int);
+
+ /*
+ * Now see if any of these threads match our boot cpu.
+ * NOTE: This must match the parsing done in smp_setup_cpu_maps.
+ */
+ for (i = 0; i < nthreads; i++) {
+ if (be32_to_cpu(intserv[i]) ==
+ fdt_boot_cpuid_phys(initial_boot_params)) {
+ found = boot_cpu_count;
+ found_thread = i;
+ }
+#ifdef CONFIG_SMP
+ /* logical cpu id is always 0 on UP kernels */
+ boot_cpu_count++;
+#endif
+ }
+
+ /* Not the boot CPU */
+ if (found < 0)
+ return 0;
+
+ DBG("boot cpu: logical %d physical %d\n", found,
+ be32_to_cpu(intserv[found_thread]));
+ boot_cpuid = found;
+
+ if (IS_ENABLED(CONFIG_PPC64))
+ boot_cpu_hwid = be32_to_cpu(intserv[found_thread]);
+
+ /*
+ * PAPR defines "logical" PVR values for cpus that
+ * meet various levels of the architecture:
+ * 0x0f000001 Architecture version 2.04
+ * 0x0f000002 Architecture version 2.05
+ * If the cpu-version property in the cpu node contains
+ * such a value, we call identify_cpu again with the
+ * logical PVR value in order to use the cpu feature
+ * bits appropriate for the architecture level.
+ *
+ * A POWER6 partition in "POWER6 architected" mode
+ * uses the 0x0f000002 PVR value; in POWER5+ mode
+ * it uses 0x0f000001.
+ *
+ * If we're using device tree CPU feature discovery then we don't
+ * support the cpu-version property, and it's the responsibility of the
+ * firmware/hypervisor to provide the correct feature set for the
+ * architecture level via the ibm,powerpc-cpu-features binding.
+ */
+ if (!dt_cpu_ftrs_in_use()) {
+ prop = of_get_flat_dt_prop(node, "cpu-version", NULL);
+ if (prop && (be32_to_cpup(prop) & 0xff000000) == 0x0f000000) {
+ identify_cpu(0, be32_to_cpup(prop));
+ seq_buf_printf(&ppc_hw_desc, "0x%04x ", be32_to_cpup(prop));
+ }
+
+ check_cpu_feature_properties(node);
+ check_cpu_features(node, "ibm,pa-features", ibm_pa_features,
+ ARRAY_SIZE(ibm_pa_features));
+ check_cpu_features(node, "ibm,pi-features", ibm_pi_features,
+ ARRAY_SIZE(ibm_pi_features));
+ }
+
+ identical_pvr_fixup(node);
+ init_mmu_slb_size(node);
+
+#ifdef CONFIG_PPC64
+ if (nthreads == 1)
+ cur_cpu_spec->cpu_features &= ~CPU_FTR_SMT;
+ else if (!dt_cpu_ftrs_in_use())
+ cur_cpu_spec->cpu_features |= CPU_FTR_SMT;
+#endif
+
+ return 0;
+}
+
+static int __init early_init_dt_scan_chosen_ppc(unsigned long node,
+ const char *uname,
+ int depth, void *data)
+{
+ const unsigned long *lprop; /* All these set by kernel, so no need to convert endian */
+
+ /* Use common scan routine to determine if this is the chosen node */
+ if (early_init_dt_scan_chosen(data) < 0)
+ return 0;
+
+#ifdef CONFIG_PPC64
+ /* check if iommu is forced on or off */
+ if (of_get_flat_dt_prop(node, "linux,iommu-off", NULL) != NULL)
+ iommu_is_off = 1;
+ if (of_get_flat_dt_prop(node, "linux,iommu-force-on", NULL) != NULL)
+ iommu_force_on = 1;
+#endif
+
+ /* mem=x on the command line is the preferred mechanism */
+ lprop = of_get_flat_dt_prop(node, "linux,memory-limit", NULL);
+ if (lprop)
+ memory_limit = *lprop;
+
+#ifdef CONFIG_PPC64
+ lprop = of_get_flat_dt_prop(node, "linux,tce-alloc-start", NULL);
+ if (lprop)
+ tce_alloc_start = *lprop;
+ lprop = of_get_flat_dt_prop(node, "linux,tce-alloc-end", NULL);
+ if (lprop)
+ tce_alloc_end = *lprop;
+#endif
+
+#ifdef CONFIG_KEXEC_CORE
+ lprop = of_get_flat_dt_prop(node, "linux,crashkernel-base", NULL);
+ if (lprop)
+ crashk_res.start = *lprop;
+
+ lprop = of_get_flat_dt_prop(node, "linux,crashkernel-size", NULL);
+ if (lprop)
+ crashk_res.end = crashk_res.start + *lprop - 1;
+#endif
+
+ /* break now */
+ return 1;
+}
+
+/*
+ * Compare the range against max mem limit and update
+ * size if it cross the limit.
+ */
+
+#ifdef CONFIG_SPARSEMEM
+static bool __init validate_mem_limit(u64 base, u64 *size)
+{
+ u64 max_mem = 1UL << (MAX_PHYSMEM_BITS);
+
+ if (base >= max_mem)
+ return false;
+ if ((base + *size) > max_mem)
+ *size = max_mem - base;
+ return true;
+}
+#else
+static bool __init validate_mem_limit(u64 base, u64 *size)
+{
+ return true;
+}
+#endif
+
+#ifdef CONFIG_PPC_PSERIES
+/*
+ * Interpret the ibm dynamic reconfiguration memory LMBs.
+ * This contains a list of memory blocks along with NUMA affinity
+ * information.
+ */
+static int __init early_init_drmem_lmb(struct drmem_lmb *lmb,
+ const __be32 **usm,
+ void *data)
+{
+ u64 base, size;
+ int is_kexec_kdump = 0, rngs;
+
+ base = lmb->base_addr;
+ size = drmem_lmb_size();
+ rngs = 1;
+
+ /*
+ * Skip this block if the reserved bit is set in flags
+ * or if the block is not assigned to this partition.
+ */
+ if ((lmb->flags & DRCONF_MEM_RESERVED) ||
+ !(lmb->flags & DRCONF_MEM_ASSIGNED))
+ return 0;
+
+ if (*usm)
+ is_kexec_kdump = 1;
+
+ if (is_kexec_kdump) {
+ /*
+ * For each memblock in ibm,dynamic-memory, a
+ * corresponding entry in linux,drconf-usable-memory
+ * property contains a counter 'p' followed by 'p'
+ * (base, size) duple. Now read the counter from
+ * linux,drconf-usable-memory property
+ */
+ rngs = dt_mem_next_cell(dt_root_size_cells, usm);
+ if (!rngs) /* there are no (base, size) duple */
+ return 0;
+ }
+
+ do {
+ if (is_kexec_kdump) {
+ base = dt_mem_next_cell(dt_root_addr_cells, usm);
+ size = dt_mem_next_cell(dt_root_size_cells, usm);
+ }
+
+ if (iommu_is_off) {
+ if (base >= 0x80000000ul)
+ continue;
+ if ((base + size) > 0x80000000ul)
+ size = 0x80000000ul - base;
+ }
+
+ if (!validate_mem_limit(base, &size))
+ continue;
+
+ DBG("Adding: %llx -> %llx\n", base, size);
+ memblock_add(base, size);
+
+ if (lmb->flags & DRCONF_MEM_HOTREMOVABLE)
+ memblock_mark_hotplug(base, size);
+ } while (--rngs);
+
+ return 0;
+}
+#endif /* CONFIG_PPC_PSERIES */
+
+static int __init early_init_dt_scan_memory_ppc(void)
+{
+#ifdef CONFIG_PPC_PSERIES
+ const void *fdt = initial_boot_params;
+ int node = fdt_path_offset(fdt, "/ibm,dynamic-reconfiguration-memory");
+
+ if (node > 0)
+ walk_drmem_lmbs_early(node, NULL, early_init_drmem_lmb);
+
+#endif
+
+ return early_init_dt_scan_memory();
+}
+
+/*
+ * For a relocatable kernel, we need to get the memstart_addr first,
+ * then use it to calculate the virtual kernel start address. This has
+ * to happen at a very early stage (before machine_init). In this case,
+ * we just want to get the memstart_address and would not like to mess the
+ * memblock at this stage. So introduce a variable to skip the memblock_add()
+ * for this reason.
+ */
+#ifdef CONFIG_RELOCATABLE
+static int add_mem_to_memblock = 1;
+#else
+#define add_mem_to_memblock 1
+#endif
+
+void __init early_init_dt_add_memory_arch(u64 base, u64 size)
+{
+#ifdef CONFIG_PPC64
+ if (iommu_is_off) {
+ if (base >= 0x80000000ul)
+ return;
+ if ((base + size) > 0x80000000ul)
+ size = 0x80000000ul - base;
+ }
+#endif
+ /* Keep track of the beginning of memory -and- the size of
+ * the very first block in the device-tree as it represents
+ * the RMA on ppc64 server
+ */
+ if (base < memstart_addr) {
+ memstart_addr = base;
+ first_memblock_size = size;
+ }
+
+ /* Add the chunk to the MEMBLOCK list */
+ if (add_mem_to_memblock) {
+ if (validate_mem_limit(base, &size))
+ memblock_add(base, size);
+ }
+}
+
+static void __init early_reserve_mem_dt(void)
+{
+ unsigned long i, dt_root;
+ int len;
+ const __be32 *prop;
+
+ early_init_fdt_reserve_self();
+ early_init_fdt_scan_reserved_mem();
+
+ dt_root = of_get_flat_dt_root();
+
+ prop = of_get_flat_dt_prop(dt_root, "reserved-ranges", &len);
+
+ if (!prop)
+ return;
+
+ DBG("Found new-style reserved-ranges\n");
+
+ /* Each reserved range is an (address,size) pair, 2 cells each,
+ * totalling 4 cells per range. */
+ for (i = 0; i < len / (sizeof(*prop) * 4); i++) {
+ u64 base, size;
+
+ base = of_read_number(prop + (i * 4) + 0, 2);
+ size = of_read_number(prop + (i * 4) + 2, 2);
+
+ if (size) {
+ DBG("reserving: %llx -> %llx\n", base, size);
+ memblock_reserve(base, size);
+ }
+ }
+}
+
+static void __init early_reserve_mem(void)
+{
+ __be64 *reserve_map;
+
+ reserve_map = (__be64 *)(((unsigned long)initial_boot_params) +
+ fdt_off_mem_rsvmap(initial_boot_params));
+
+ /* Look for the new "reserved-regions" property in the DT */
+ early_reserve_mem_dt();
+
+#ifdef CONFIG_BLK_DEV_INITRD
+ /* Then reserve the initrd, if any */
+ if (initrd_start && (initrd_end > initrd_start)) {
+ memblock_reserve(ALIGN_DOWN(__pa(initrd_start), PAGE_SIZE),
+ ALIGN(initrd_end, PAGE_SIZE) -
+ ALIGN_DOWN(initrd_start, PAGE_SIZE));
+ }
+#endif /* CONFIG_BLK_DEV_INITRD */
+
+ if (!IS_ENABLED(CONFIG_PPC32))
+ return;
+
+ /*
+ * Handle the case where we might be booting from an old kexec
+ * image that setup the mem_rsvmap as pairs of 32-bit values
+ */
+ if (be64_to_cpup(reserve_map) > 0xffffffffull) {
+ u32 base_32, size_32;
+ __be32 *reserve_map_32 = (__be32 *)reserve_map;
+
+ DBG("Found old 32-bit reserve map\n");
+
+ while (1) {
+ base_32 = be32_to_cpup(reserve_map_32++);
+ size_32 = be32_to_cpup(reserve_map_32++);
+ if (size_32 == 0)
+ break;
+ DBG("reserving: %x -> %x\n", base_32, size_32);
+ memblock_reserve(base_32, size_32);
+ }
+ return;
+ }
+}
+
+#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
+static bool tm_disabled __initdata;
+
+static int __init parse_ppc_tm(char *str)
+{
+ bool res;
+
+ if (kstrtobool(str, &res))
+ return -EINVAL;
+
+ tm_disabled = !res;
+
+ return 0;
+}
+early_param("ppc_tm", parse_ppc_tm);
+
+static void __init tm_init(void)
+{
+ if (tm_disabled) {
+ pr_info("Disabling hardware transactional memory (HTM)\n");
+ cur_cpu_spec->cpu_user_features2 &=
+ ~(PPC_FEATURE2_HTM_NOSC | PPC_FEATURE2_HTM);
+ cur_cpu_spec->cpu_features &= ~CPU_FTR_TM;
+ return;
+ }
+
+ pnv_tm_init();
+}
+#else
+static void tm_init(void) { }
+#endif /* CONFIG_PPC_TRANSACTIONAL_MEM */
+
+static int __init
+early_init_dt_scan_model(unsigned long node, const char *uname,
+ int depth, void *data)
+{
+ const char *prop;
+
+ if (depth != 0)
+ return 0;
+
+ prop = of_get_flat_dt_prop(node, "model", NULL);
+ if (prop)
+ seq_buf_printf(&ppc_hw_desc, "%s ", prop);
+
+ /* break now */
+ return 1;
+}
+
+#ifdef CONFIG_PPC64
+static void __init save_fscr_to_task(void)
+{
+ /*
+ * Ensure the init_task (pid 0, aka swapper) uses the value of FSCR we
+ * have configured via the device tree features or via __init_FSCR().
+ * That value will then be propagated to pid 1 (init) and all future
+ * processes.
+ */
+ if (early_cpu_has_feature(CPU_FTR_ARCH_207S))
+ init_task.thread.fscr = mfspr(SPRN_FSCR);
+}
+#else
+static inline void save_fscr_to_task(void) {}
+#endif
+
+
+void __init early_init_devtree(void *params)
+{
+ phys_addr_t limit;
+
+ DBG(" -> early_init_devtree(%px)\n", params);
+
+ /* Too early to BUG_ON(), do it by hand */
+ if (!early_init_dt_verify(params))
+ panic("BUG: Failed verifying flat device tree, bad version?");
+
+ of_scan_flat_dt(early_init_dt_scan_model, NULL);
+
+#ifdef CONFIG_PPC_RTAS
+ /* Some machines might need RTAS info for debugging, grab it now. */
+ of_scan_flat_dt(early_init_dt_scan_rtas, NULL);
+#endif
+
+#ifdef CONFIG_PPC_POWERNV
+ /* Some machines might need OPAL info for debugging, grab it now. */
+ of_scan_flat_dt(early_init_dt_scan_opal, NULL);
+
+ /* Scan tree for ultravisor feature */
+ of_scan_flat_dt(early_init_dt_scan_ultravisor, NULL);
+#endif
+
+#if defined(CONFIG_FA_DUMP) || defined(CONFIG_PRESERVE_FA_DUMP)
+ /* scan tree to see if dump is active during last boot */
+ of_scan_flat_dt(early_init_dt_scan_fw_dump, NULL);
+#endif
+
+ /* Retrieve various informations from the /chosen node of the
+ * device-tree, including the platform type, initrd location and
+ * size, TCE reserve, and more ...
+ */
+ of_scan_flat_dt(early_init_dt_scan_chosen_ppc, boot_command_line);
+
+ /* Scan memory nodes and rebuild MEMBLOCKs */
+ early_init_dt_scan_root();
+ early_init_dt_scan_memory_ppc();
+
+ /*
+ * As generic code authors expect to be able to use static keys
+ * in early_param() handlers, we initialize the static keys just
+ * before parsing early params (it's fine to call jump_label_init()
+ * more than once).
+ */
+ jump_label_init();
+ parse_early_param();
+
+ /* make sure we've parsed cmdline for mem= before this */
+ if (memory_limit)
+ first_memblock_size = min_t(u64, first_memblock_size, memory_limit);
+ setup_initial_memory_limit(memstart_addr, first_memblock_size);
+ /* Reserve MEMBLOCK regions used by kernel, initrd, dt, etc... */
+ memblock_reserve(PHYSICAL_START, __pa(_end) - PHYSICAL_START);
+ /* If relocatable, reserve first 32k for interrupt vectors etc. */
+ if (PHYSICAL_START > MEMORY_START)
+ memblock_reserve(MEMORY_START, 0x8000);
+ reserve_kdump_trampoline();
+#if defined(CONFIG_FA_DUMP) || defined(CONFIG_PRESERVE_FA_DUMP)
+ /*
+ * If we fail to reserve memory for firmware-assisted dump then
+ * fallback to kexec based kdump.
+ */
+ if (fadump_reserve_mem() == 0)
+#endif
+ reserve_crashkernel();
+ early_reserve_mem();
+
+ /* Ensure that total memory size is page-aligned. */
+ limit = ALIGN(memory_limit ?: memblock_phys_mem_size(), PAGE_SIZE);
+ memblock_enforce_memory_limit(limit);
+
+#if defined(CONFIG_PPC_BOOK3S_64) && defined(CONFIG_PPC_4K_PAGES)
+ if (!early_radix_enabled())
+ memblock_cap_memory_range(0, 1UL << (H_MAX_PHYSMEM_BITS));
+#endif
+
+ memblock_allow_resize();
+ memblock_dump_all();
+
+ DBG("Phys. mem: %llx\n", (unsigned long long)memblock_phys_mem_size());
+
+ /* We may need to relocate the flat tree, do it now.
+ * FIXME .. and the initrd too? */
+ move_device_tree();
+
+ DBG("Scanning CPUs ...\n");
+
+ dt_cpu_ftrs_scan();
+
+ // We can now add the CPU name & PVR to the hardware description
+ seq_buf_printf(&ppc_hw_desc, "%s 0x%04lx ", cur_cpu_spec->cpu_name, mfspr(SPRN_PVR));
+
+ /* Retrieve CPU related informations from the flat tree
+ * (altivec support, boot CPU ID, ...)
+ */
+ of_scan_flat_dt(early_init_dt_scan_cpus, NULL);
+ if (boot_cpuid < 0) {
+ printk("Failed to identify boot CPU !\n");
+ BUG();
+ }
+
+ save_fscr_to_task();
+
+#if defined(CONFIG_SMP) && defined(CONFIG_PPC64)
+ /* We'll later wait for secondaries to check in; there are
+ * NCPUS-1 non-boot CPUs :-)
+ */
+ spinning_secondaries = boot_cpu_count - 1;
+#endif
+
+ mmu_early_init_devtree();
+
+#ifdef CONFIG_PPC_POWERNV
+ /* Scan and build the list of machine check recoverable ranges */
+ of_scan_flat_dt(early_init_dt_scan_recoverable_ranges, NULL);
+#endif
+ epapr_paravirt_early_init();
+
+ /* Now try to figure out if we are running on LPAR and so on */
+ pseries_probe_fw_features();
+
+ /*
+ * Initialize pkey features and default AMR/IAMR values
+ */
+ pkey_early_init_devtree();
+
+#ifdef CONFIG_PPC_PS3
+ /* Identify PS3 firmware */
+ if (of_flat_dt_is_compatible(of_get_flat_dt_root(), "sony,ps3"))
+ powerpc_firmware_features |= FW_FEATURE_PS3_POSSIBLE;
+#endif
+
+ tm_init();
+
+ DBG(" <- early_init_devtree()\n");
+}
+
+#ifdef CONFIG_RELOCATABLE
+/*
+ * This function run before early_init_devtree, so we have to init
+ * initial_boot_params.
+ */
+void __init early_get_first_memblock_info(void *params, phys_addr_t *size)
+{
+ /* Setup flat device-tree pointer */
+ initial_boot_params = params;
+
+ /*
+ * Scan the memory nodes and set add_mem_to_memblock to 0 to avoid
+ * mess the memblock.
+ */
+ add_mem_to_memblock = 0;
+ early_init_dt_scan_root();
+ early_init_dt_scan_memory_ppc();
+ add_mem_to_memblock = 1;
+
+ if (size)
+ *size = first_memblock_size;
+}
+#endif
+
+/*******
+ *
+ * New implementation of the OF "find" APIs, return a refcounted
+ * object, call of_node_put() when done. The device tree and list
+ * are protected by a rw_lock.
+ *
+ * Note that property management will need some locking as well,
+ * this isn't dealt with yet.
+ *
+ *******/
+
+/**
+ * of_get_ibm_chip_id - Returns the IBM "chip-id" of a device
+ * @np: device node of the device
+ *
+ * This looks for a property "ibm,chip-id" in the node or any
+ * of its parents and returns its content, or -1 if it cannot
+ * be found.
+ */
+int of_get_ibm_chip_id(struct device_node *np)
+{
+ of_node_get(np);
+ while (np) {
+ u32 chip_id;
+
+ /*
+ * Skiboot may produce memory nodes that contain more than one
+ * cell in chip-id, we only read the first one here.
+ */
+ if (!of_property_read_u32(np, "ibm,chip-id", &chip_id)) {
+ of_node_put(np);
+ return chip_id;
+ }
+
+ np = of_get_next_parent(np);
+ }
+ return -1;
+}
+EXPORT_SYMBOL(of_get_ibm_chip_id);
+
+/**
+ * cpu_to_chip_id - Return the cpus chip-id
+ * @cpu: The logical cpu number.
+ *
+ * Return the value of the ibm,chip-id property corresponding to the given
+ * logical cpu number. If the chip-id can not be found, returns -1.
+ */
+int cpu_to_chip_id(int cpu)
+{
+ struct device_node *np;
+ int ret = -1, idx;
+
+ idx = cpu / threads_per_core;
+ if (chip_id_lookup_table && chip_id_lookup_table[idx] != -1)
+ return chip_id_lookup_table[idx];
+
+ np = of_get_cpu_node(cpu, NULL);
+ if (np) {
+ ret = of_get_ibm_chip_id(np);
+ of_node_put(np);
+
+ if (chip_id_lookup_table)
+ chip_id_lookup_table[idx] = ret;
+ }
+
+ return ret;
+}
+EXPORT_SYMBOL(cpu_to_chip_id);
+
+bool arch_match_cpu_phys_id(int cpu, u64 phys_id)
+{
+#ifdef CONFIG_SMP
+ /*
+ * Early firmware scanning must use this rather than
+ * get_hard_smp_processor_id because we don't have pacas allocated
+ * until memory topology is discovered.
+ */
+ if (cpu_to_phys_id != NULL)
+ return (int)phys_id == cpu_to_phys_id[cpu];
+#endif
+
+ return (int)phys_id == get_hard_smp_processor_id(cpu);
+}