summaryrefslogtreecommitdiffstats
path: root/arch/powerpc/kvm/book3s_xive.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/powerpc/kvm/book3s_xive.c')
-rw-r--r--arch/powerpc/kvm/book3s_xive.c2984
1 files changed, 2984 insertions, 0 deletions
diff --git a/arch/powerpc/kvm/book3s_xive.c b/arch/powerpc/kvm/book3s_xive.c
new file mode 100644
index 000000000..4ca23644f
--- /dev/null
+++ b/arch/powerpc/kvm/book3s_xive.c
@@ -0,0 +1,2984 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright 2017 Benjamin Herrenschmidt, IBM Corporation.
+ */
+
+#define pr_fmt(fmt) "xive-kvm: " fmt
+
+#include <linux/kernel.h>
+#include <linux/kvm_host.h>
+#include <linux/err.h>
+#include <linux/gfp.h>
+#include <linux/spinlock.h>
+#include <linux/delay.h>
+#include <linux/percpu.h>
+#include <linux/cpumask.h>
+#include <linux/uaccess.h>
+#include <linux/irqdomain.h>
+#include <asm/kvm_book3s.h>
+#include <asm/kvm_ppc.h>
+#include <asm/hvcall.h>
+#include <asm/xics.h>
+#include <asm/xive.h>
+#include <asm/xive-regs.h>
+#include <asm/debug.h>
+#include <asm/time.h>
+#include <asm/opal.h>
+
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
+
+#include "book3s_xive.h"
+
+#define __x_eoi_page(xd) ((void __iomem *)((xd)->eoi_mmio))
+#define __x_trig_page(xd) ((void __iomem *)((xd)->trig_mmio))
+
+/* Dummy interrupt used when taking interrupts out of a queue in H_CPPR */
+#define XICS_DUMMY 1
+
+static void xive_vm_ack_pending(struct kvmppc_xive_vcpu *xc)
+{
+ u8 cppr;
+ u16 ack;
+
+ /*
+ * Ensure any previous store to CPPR is ordered vs.
+ * the subsequent loads from PIPR or ACK.
+ */
+ eieio();
+
+ /* Perform the acknowledge OS to register cycle. */
+ ack = be16_to_cpu(__raw_readw(xive_tima + TM_SPC_ACK_OS_REG));
+
+ /* Synchronize subsequent queue accesses */
+ mb();
+
+ /* XXX Check grouping level */
+
+ /* Anything ? */
+ if (!((ack >> 8) & TM_QW1_NSR_EO))
+ return;
+
+ /* Grab CPPR of the most favored pending interrupt */
+ cppr = ack & 0xff;
+ if (cppr < 8)
+ xc->pending |= 1 << cppr;
+
+ /* Check consistency */
+ if (cppr >= xc->hw_cppr)
+ pr_warn("KVM-XIVE: CPU %d odd ack CPPR, got %d at %d\n",
+ smp_processor_id(), cppr, xc->hw_cppr);
+
+ /*
+ * Update our image of the HW CPPR. We don't yet modify
+ * xc->cppr, this will be done as we scan for interrupts
+ * in the queues.
+ */
+ xc->hw_cppr = cppr;
+}
+
+static u8 xive_vm_esb_load(struct xive_irq_data *xd, u32 offset)
+{
+ u64 val;
+
+ if (offset == XIVE_ESB_SET_PQ_10 && xd->flags & XIVE_IRQ_FLAG_STORE_EOI)
+ offset |= XIVE_ESB_LD_ST_MO;
+
+ val = __raw_readq(__x_eoi_page(xd) + offset);
+#ifdef __LITTLE_ENDIAN__
+ val >>= 64-8;
+#endif
+ return (u8)val;
+}
+
+
+static void xive_vm_source_eoi(u32 hw_irq, struct xive_irq_data *xd)
+{
+ /* If the XIVE supports the new "store EOI facility, use it */
+ if (xd->flags & XIVE_IRQ_FLAG_STORE_EOI)
+ __raw_writeq(0, __x_eoi_page(xd) + XIVE_ESB_STORE_EOI);
+ else if (xd->flags & XIVE_IRQ_FLAG_LSI) {
+ /*
+ * For LSIs the HW EOI cycle is used rather than PQ bits,
+ * as they are automatically re-triggred in HW when still
+ * pending.
+ */
+ __raw_readq(__x_eoi_page(xd) + XIVE_ESB_LOAD_EOI);
+ } else {
+ uint64_t eoi_val;
+
+ /*
+ * Otherwise for EOI, we use the special MMIO that does
+ * a clear of both P and Q and returns the old Q,
+ * except for LSIs where we use the "EOI cycle" special
+ * load.
+ *
+ * This allows us to then do a re-trigger if Q was set
+ * rather than synthetizing an interrupt in software
+ */
+ eoi_val = xive_vm_esb_load(xd, XIVE_ESB_SET_PQ_00);
+
+ /* Re-trigger if needed */
+ if ((eoi_val & 1) && __x_trig_page(xd))
+ __raw_writeq(0, __x_trig_page(xd));
+ }
+}
+
+enum {
+ scan_fetch,
+ scan_poll,
+ scan_eoi,
+};
+
+static u32 xive_vm_scan_interrupts(struct kvmppc_xive_vcpu *xc,
+ u8 pending, int scan_type)
+{
+ u32 hirq = 0;
+ u8 prio = 0xff;
+
+ /* Find highest pending priority */
+ while ((xc->mfrr != 0xff || pending != 0) && hirq == 0) {
+ struct xive_q *q;
+ u32 idx, toggle;
+ __be32 *qpage;
+
+ /*
+ * If pending is 0 this will return 0xff which is what
+ * we want
+ */
+ prio = ffs(pending) - 1;
+
+ /* Don't scan past the guest cppr */
+ if (prio >= xc->cppr || prio > 7) {
+ if (xc->mfrr < xc->cppr) {
+ prio = xc->mfrr;
+ hirq = XICS_IPI;
+ }
+ break;
+ }
+
+ /* Grab queue and pointers */
+ q = &xc->queues[prio];
+ idx = q->idx;
+ toggle = q->toggle;
+
+ /*
+ * Snapshot the queue page. The test further down for EOI
+ * must use the same "copy" that was used by __xive_read_eq
+ * since qpage can be set concurrently and we don't want
+ * to miss an EOI.
+ */
+ qpage = READ_ONCE(q->qpage);
+
+skip_ipi:
+ /*
+ * Try to fetch from the queue. Will return 0 for a
+ * non-queueing priority (ie, qpage = 0).
+ */
+ hirq = __xive_read_eq(qpage, q->msk, &idx, &toggle);
+
+ /*
+ * If this was a signal for an MFFR change done by
+ * H_IPI we skip it. Additionally, if we were fetching
+ * we EOI it now, thus re-enabling reception of a new
+ * such signal.
+ *
+ * We also need to do that if prio is 0 and we had no
+ * page for the queue. In this case, we have non-queued
+ * IPI that needs to be EOId.
+ *
+ * This is safe because if we have another pending MFRR
+ * change that wasn't observed above, the Q bit will have
+ * been set and another occurrence of the IPI will trigger.
+ */
+ if (hirq == XICS_IPI || (prio == 0 && !qpage)) {
+ if (scan_type == scan_fetch) {
+ xive_vm_source_eoi(xc->vp_ipi,
+ &xc->vp_ipi_data);
+ q->idx = idx;
+ q->toggle = toggle;
+ }
+ /* Loop back on same queue with updated idx/toggle */
+ WARN_ON(hirq && hirq != XICS_IPI);
+ if (hirq)
+ goto skip_ipi;
+ }
+
+ /* If it's the dummy interrupt, continue searching */
+ if (hirq == XICS_DUMMY)
+ goto skip_ipi;
+
+ /* Clear the pending bit if the queue is now empty */
+ if (!hirq) {
+ pending &= ~(1 << prio);
+
+ /*
+ * Check if the queue count needs adjusting due to
+ * interrupts being moved away.
+ */
+ if (atomic_read(&q->pending_count)) {
+ int p = atomic_xchg(&q->pending_count, 0);
+
+ if (p) {
+ WARN_ON(p > atomic_read(&q->count));
+ atomic_sub(p, &q->count);
+ }
+ }
+ }
+
+ /*
+ * If the most favoured prio we found pending is less
+ * favored (or equal) than a pending IPI, we return
+ * the IPI instead.
+ */
+ if (prio >= xc->mfrr && xc->mfrr < xc->cppr) {
+ prio = xc->mfrr;
+ hirq = XICS_IPI;
+ break;
+ }
+
+ /* If fetching, update queue pointers */
+ if (scan_type == scan_fetch) {
+ q->idx = idx;
+ q->toggle = toggle;
+ }
+ }
+
+ /* If we are just taking a "peek", do nothing else */
+ if (scan_type == scan_poll)
+ return hirq;
+
+ /* Update the pending bits */
+ xc->pending = pending;
+
+ /*
+ * If this is an EOI that's it, no CPPR adjustment done here,
+ * all we needed was cleanup the stale pending bits and check
+ * if there's anything left.
+ */
+ if (scan_type == scan_eoi)
+ return hirq;
+
+ /*
+ * If we found an interrupt, adjust what the guest CPPR should
+ * be as if we had just fetched that interrupt from HW.
+ *
+ * Note: This can only make xc->cppr smaller as the previous
+ * loop will only exit with hirq != 0 if prio is lower than
+ * the current xc->cppr. Thus we don't need to re-check xc->mfrr
+ * for pending IPIs.
+ */
+ if (hirq)
+ xc->cppr = prio;
+ /*
+ * If it was an IPI the HW CPPR might have been lowered too much
+ * as the HW interrupt we use for IPIs is routed to priority 0.
+ *
+ * We re-sync it here.
+ */
+ if (xc->cppr != xc->hw_cppr) {
+ xc->hw_cppr = xc->cppr;
+ __raw_writeb(xc->cppr, xive_tima + TM_QW1_OS + TM_CPPR);
+ }
+
+ return hirq;
+}
+
+static unsigned long xive_vm_h_xirr(struct kvm_vcpu *vcpu)
+{
+ struct kvmppc_xive_vcpu *xc = vcpu->arch.xive_vcpu;
+ u8 old_cppr;
+ u32 hirq;
+
+ pr_devel("H_XIRR\n");
+
+ xc->stat_vm_h_xirr++;
+
+ /* First collect pending bits from HW */
+ xive_vm_ack_pending(xc);
+
+ pr_devel(" new pending=0x%02x hw_cppr=%d cppr=%d\n",
+ xc->pending, xc->hw_cppr, xc->cppr);
+
+ /* Grab previous CPPR and reverse map it */
+ old_cppr = xive_prio_to_guest(xc->cppr);
+
+ /* Scan for actual interrupts */
+ hirq = xive_vm_scan_interrupts(xc, xc->pending, scan_fetch);
+
+ pr_devel(" got hirq=0x%x hw_cppr=%d cppr=%d\n",
+ hirq, xc->hw_cppr, xc->cppr);
+
+ /* That should never hit */
+ if (hirq & 0xff000000)
+ pr_warn("XIVE: Weird guest interrupt number 0x%08x\n", hirq);
+
+ /*
+ * XXX We could check if the interrupt is masked here and
+ * filter it. If we chose to do so, we would need to do:
+ *
+ * if (masked) {
+ * lock();
+ * if (masked) {
+ * old_Q = true;
+ * hirq = 0;
+ * }
+ * unlock();
+ * }
+ */
+
+ /* Return interrupt and old CPPR in GPR4 */
+ vcpu->arch.regs.gpr[4] = hirq | (old_cppr << 24);
+
+ return H_SUCCESS;
+}
+
+static unsigned long xive_vm_h_ipoll(struct kvm_vcpu *vcpu, unsigned long server)
+{
+ struct kvmppc_xive_vcpu *xc = vcpu->arch.xive_vcpu;
+ u8 pending = xc->pending;
+ u32 hirq;
+
+ pr_devel("H_IPOLL(server=%ld)\n", server);
+
+ xc->stat_vm_h_ipoll++;
+
+ /* Grab the target VCPU if not the current one */
+ if (xc->server_num != server) {
+ vcpu = kvmppc_xive_find_server(vcpu->kvm, server);
+ if (!vcpu)
+ return H_PARAMETER;
+ xc = vcpu->arch.xive_vcpu;
+
+ /* Scan all priorities */
+ pending = 0xff;
+ } else {
+ /* Grab pending interrupt if any */
+ __be64 qw1 = __raw_readq(xive_tima + TM_QW1_OS);
+ u8 pipr = be64_to_cpu(qw1) & 0xff;
+
+ if (pipr < 8)
+ pending |= 1 << pipr;
+ }
+
+ hirq = xive_vm_scan_interrupts(xc, pending, scan_poll);
+
+ /* Return interrupt and old CPPR in GPR4 */
+ vcpu->arch.regs.gpr[4] = hirq | (xc->cppr << 24);
+
+ return H_SUCCESS;
+}
+
+static void xive_vm_push_pending_to_hw(struct kvmppc_xive_vcpu *xc)
+{
+ u8 pending, prio;
+
+ pending = xc->pending;
+ if (xc->mfrr != 0xff) {
+ if (xc->mfrr < 8)
+ pending |= 1 << xc->mfrr;
+ else
+ pending |= 0x80;
+ }
+ if (!pending)
+ return;
+ prio = ffs(pending) - 1;
+
+ __raw_writeb(prio, xive_tima + TM_SPC_SET_OS_PENDING);
+}
+
+static void xive_vm_scan_for_rerouted_irqs(struct kvmppc_xive *xive,
+ struct kvmppc_xive_vcpu *xc)
+{
+ unsigned int prio;
+
+ /* For each priority that is now masked */
+ for (prio = xc->cppr; prio < KVMPPC_XIVE_Q_COUNT; prio++) {
+ struct xive_q *q = &xc->queues[prio];
+ struct kvmppc_xive_irq_state *state;
+ struct kvmppc_xive_src_block *sb;
+ u32 idx, toggle, entry, irq, hw_num;
+ struct xive_irq_data *xd;
+ __be32 *qpage;
+ u16 src;
+
+ idx = q->idx;
+ toggle = q->toggle;
+ qpage = READ_ONCE(q->qpage);
+ if (!qpage)
+ continue;
+
+ /* For each interrupt in the queue */
+ for (;;) {
+ entry = be32_to_cpup(qpage + idx);
+
+ /* No more ? */
+ if ((entry >> 31) == toggle)
+ break;
+ irq = entry & 0x7fffffff;
+
+ /* Skip dummies and IPIs */
+ if (irq == XICS_DUMMY || irq == XICS_IPI)
+ goto next;
+ sb = kvmppc_xive_find_source(xive, irq, &src);
+ if (!sb)
+ goto next;
+ state = &sb->irq_state[src];
+
+ /* Has it been rerouted ? */
+ if (xc->server_num == state->act_server)
+ goto next;
+
+ /*
+ * Allright, it *has* been re-routed, kill it from
+ * the queue.
+ */
+ qpage[idx] = cpu_to_be32((entry & 0x80000000) | XICS_DUMMY);
+
+ /* Find the HW interrupt */
+ kvmppc_xive_select_irq(state, &hw_num, &xd);
+
+ /* If it's not an LSI, set PQ to 11 the EOI will force a resend */
+ if (!(xd->flags & XIVE_IRQ_FLAG_LSI))
+ xive_vm_esb_load(xd, XIVE_ESB_SET_PQ_11);
+
+ /* EOI the source */
+ xive_vm_source_eoi(hw_num, xd);
+
+next:
+ idx = (idx + 1) & q->msk;
+ if (idx == 0)
+ toggle ^= 1;
+ }
+ }
+}
+
+static int xive_vm_h_cppr(struct kvm_vcpu *vcpu, unsigned long cppr)
+{
+ struct kvmppc_xive_vcpu *xc = vcpu->arch.xive_vcpu;
+ struct kvmppc_xive *xive = vcpu->kvm->arch.xive;
+ u8 old_cppr;
+
+ pr_devel("H_CPPR(cppr=%ld)\n", cppr);
+
+ xc->stat_vm_h_cppr++;
+
+ /* Map CPPR */
+ cppr = xive_prio_from_guest(cppr);
+
+ /* Remember old and update SW state */
+ old_cppr = xc->cppr;
+ xc->cppr = cppr;
+
+ /*
+ * Order the above update of xc->cppr with the subsequent
+ * read of xc->mfrr inside push_pending_to_hw()
+ */
+ smp_mb();
+
+ if (cppr > old_cppr) {
+ /*
+ * We are masking less, we need to look for pending things
+ * to deliver and set VP pending bits accordingly to trigger
+ * a new interrupt otherwise we might miss MFRR changes for
+ * which we have optimized out sending an IPI signal.
+ */
+ xive_vm_push_pending_to_hw(xc);
+ } else {
+ /*
+ * We are masking more, we need to check the queue for any
+ * interrupt that has been routed to another CPU, take
+ * it out (replace it with the dummy) and retrigger it.
+ *
+ * This is necessary since those interrupts may otherwise
+ * never be processed, at least not until this CPU restores
+ * its CPPR.
+ *
+ * This is in theory racy vs. HW adding new interrupts to
+ * the queue. In practice this works because the interesting
+ * cases are when the guest has done a set_xive() to move the
+ * interrupt away, which flushes the xive, followed by the
+ * target CPU doing a H_CPPR. So any new interrupt coming into
+ * the queue must still be routed to us and isn't a source
+ * of concern.
+ */
+ xive_vm_scan_for_rerouted_irqs(xive, xc);
+ }
+
+ /* Apply new CPPR */
+ xc->hw_cppr = cppr;
+ __raw_writeb(cppr, xive_tima + TM_QW1_OS + TM_CPPR);
+
+ return H_SUCCESS;
+}
+
+static int xive_vm_h_eoi(struct kvm_vcpu *vcpu, unsigned long xirr)
+{
+ struct kvmppc_xive *xive = vcpu->kvm->arch.xive;
+ struct kvmppc_xive_src_block *sb;
+ struct kvmppc_xive_irq_state *state;
+ struct kvmppc_xive_vcpu *xc = vcpu->arch.xive_vcpu;
+ struct xive_irq_data *xd;
+ u8 new_cppr = xirr >> 24;
+ u32 irq = xirr & 0x00ffffff, hw_num;
+ u16 src;
+ int rc = 0;
+
+ pr_devel("H_EOI(xirr=%08lx)\n", xirr);
+
+ xc->stat_vm_h_eoi++;
+
+ xc->cppr = xive_prio_from_guest(new_cppr);
+
+ /*
+ * IPIs are synthetized from MFRR and thus don't need
+ * any special EOI handling. The underlying interrupt
+ * used to signal MFRR changes is EOId when fetched from
+ * the queue.
+ */
+ if (irq == XICS_IPI || irq == 0) {
+ /*
+ * This barrier orders the setting of xc->cppr vs.
+ * subsquent test of xc->mfrr done inside
+ * scan_interrupts and push_pending_to_hw
+ */
+ smp_mb();
+ goto bail;
+ }
+
+ /* Find interrupt source */
+ sb = kvmppc_xive_find_source(xive, irq, &src);
+ if (!sb) {
+ pr_devel(" source not found !\n");
+ rc = H_PARAMETER;
+ /* Same as above */
+ smp_mb();
+ goto bail;
+ }
+ state = &sb->irq_state[src];
+ kvmppc_xive_select_irq(state, &hw_num, &xd);
+
+ state->in_eoi = true;
+
+ /*
+ * This barrier orders both setting of in_eoi above vs,
+ * subsequent test of guest_priority, and the setting
+ * of xc->cppr vs. subsquent test of xc->mfrr done inside
+ * scan_interrupts and push_pending_to_hw
+ */
+ smp_mb();
+
+again:
+ if (state->guest_priority == MASKED) {
+ arch_spin_lock(&sb->lock);
+ if (state->guest_priority != MASKED) {
+ arch_spin_unlock(&sb->lock);
+ goto again;
+ }
+ pr_devel(" EOI on saved P...\n");
+
+ /* Clear old_p, that will cause unmask to perform an EOI */
+ state->old_p = false;
+
+ arch_spin_unlock(&sb->lock);
+ } else {
+ pr_devel(" EOI on source...\n");
+
+ /* Perform EOI on the source */
+ xive_vm_source_eoi(hw_num, xd);
+
+ /* If it's an emulated LSI, check level and resend */
+ if (state->lsi && state->asserted)
+ __raw_writeq(0, __x_trig_page(xd));
+
+ }
+
+ /*
+ * This barrier orders the above guest_priority check
+ * and spin_lock/unlock with clearing in_eoi below.
+ *
+ * It also has to be a full mb() as it must ensure
+ * the MMIOs done in source_eoi() are completed before
+ * state->in_eoi is visible.
+ */
+ mb();
+ state->in_eoi = false;
+bail:
+
+ /* Re-evaluate pending IRQs and update HW */
+ xive_vm_scan_interrupts(xc, xc->pending, scan_eoi);
+ xive_vm_push_pending_to_hw(xc);
+ pr_devel(" after scan pending=%02x\n", xc->pending);
+
+ /* Apply new CPPR */
+ xc->hw_cppr = xc->cppr;
+ __raw_writeb(xc->cppr, xive_tima + TM_QW1_OS + TM_CPPR);
+
+ return rc;
+}
+
+static int xive_vm_h_ipi(struct kvm_vcpu *vcpu, unsigned long server,
+ unsigned long mfrr)
+{
+ struct kvmppc_xive_vcpu *xc = vcpu->arch.xive_vcpu;
+
+ pr_devel("H_IPI(server=%08lx,mfrr=%ld)\n", server, mfrr);
+
+ xc->stat_vm_h_ipi++;
+
+ /* Find target */
+ vcpu = kvmppc_xive_find_server(vcpu->kvm, server);
+ if (!vcpu)
+ return H_PARAMETER;
+ xc = vcpu->arch.xive_vcpu;
+
+ /* Locklessly write over MFRR */
+ xc->mfrr = mfrr;
+
+ /*
+ * The load of xc->cppr below and the subsequent MMIO store
+ * to the IPI must happen after the above mfrr update is
+ * globally visible so that:
+ *
+ * - Synchronize with another CPU doing an H_EOI or a H_CPPR
+ * updating xc->cppr then reading xc->mfrr.
+ *
+ * - The target of the IPI sees the xc->mfrr update
+ */
+ mb();
+
+ /* Shoot the IPI if most favored than target cppr */
+ if (mfrr < xc->cppr)
+ __raw_writeq(0, __x_trig_page(&xc->vp_ipi_data));
+
+ return H_SUCCESS;
+}
+
+/*
+ * We leave a gap of a couple of interrupts in the queue to
+ * account for the IPI and additional safety guard.
+ */
+#define XIVE_Q_GAP 2
+
+static bool kvmppc_xive_vcpu_has_save_restore(struct kvm_vcpu *vcpu)
+{
+ struct kvmppc_xive_vcpu *xc = vcpu->arch.xive_vcpu;
+
+ /* Check enablement at VP level */
+ return xc->vp_cam & TM_QW1W2_HO;
+}
+
+bool kvmppc_xive_check_save_restore(struct kvm_vcpu *vcpu)
+{
+ struct kvmppc_xive_vcpu *xc = vcpu->arch.xive_vcpu;
+ struct kvmppc_xive *xive = xc->xive;
+
+ if (xive->flags & KVMPPC_XIVE_FLAG_SAVE_RESTORE)
+ return kvmppc_xive_vcpu_has_save_restore(vcpu);
+
+ return true;
+}
+
+/*
+ * Push a vcpu's context to the XIVE on guest entry.
+ * This assumes we are in virtual mode (MMU on)
+ */
+void kvmppc_xive_push_vcpu(struct kvm_vcpu *vcpu)
+{
+ void __iomem *tima = local_paca->kvm_hstate.xive_tima_virt;
+ u64 pq;
+
+ /*
+ * Nothing to do if the platform doesn't have a XIVE
+ * or this vCPU doesn't have its own XIVE context
+ * (e.g. because it's not using an in-kernel interrupt controller).
+ */
+ if (!tima || !vcpu->arch.xive_cam_word)
+ return;
+
+ eieio();
+ if (!kvmppc_xive_vcpu_has_save_restore(vcpu))
+ __raw_writeq(vcpu->arch.xive_saved_state.w01, tima + TM_QW1_OS);
+ __raw_writel(vcpu->arch.xive_cam_word, tima + TM_QW1_OS + TM_WORD2);
+ vcpu->arch.xive_pushed = 1;
+ eieio();
+
+ /*
+ * We clear the irq_pending flag. There is a small chance of a
+ * race vs. the escalation interrupt happening on another
+ * processor setting it again, but the only consequence is to
+ * cause a spurious wakeup on the next H_CEDE, which is not an
+ * issue.
+ */
+ vcpu->arch.irq_pending = 0;
+
+ /*
+ * In single escalation mode, if the escalation interrupt is
+ * on, we mask it.
+ */
+ if (vcpu->arch.xive_esc_on) {
+ pq = __raw_readq((void __iomem *)(vcpu->arch.xive_esc_vaddr +
+ XIVE_ESB_SET_PQ_01));
+ mb();
+
+ /*
+ * We have a possible subtle race here: The escalation
+ * interrupt might have fired and be on its way to the
+ * host queue while we mask it, and if we unmask it
+ * early enough (re-cede right away), there is a
+ * theoretical possibility that it fires again, thus
+ * landing in the target queue more than once which is
+ * a big no-no.
+ *
+ * Fortunately, solving this is rather easy. If the
+ * above load setting PQ to 01 returns a previous
+ * value where P is set, then we know the escalation
+ * interrupt is somewhere on its way to the host. In
+ * that case we simply don't clear the xive_esc_on
+ * flag below. It will be eventually cleared by the
+ * handler for the escalation interrupt.
+ *
+ * Then, when doing a cede, we check that flag again
+ * before re-enabling the escalation interrupt, and if
+ * set, we abort the cede.
+ */
+ if (!(pq & XIVE_ESB_VAL_P))
+ /* Now P is 0, we can clear the flag */
+ vcpu->arch.xive_esc_on = 0;
+ }
+}
+EXPORT_SYMBOL_GPL(kvmppc_xive_push_vcpu);
+
+/*
+ * Pull a vcpu's context from the XIVE on guest exit.
+ * This assumes we are in virtual mode (MMU on)
+ */
+void kvmppc_xive_pull_vcpu(struct kvm_vcpu *vcpu)
+{
+ void __iomem *tima = local_paca->kvm_hstate.xive_tima_virt;
+
+ if (!vcpu->arch.xive_pushed)
+ return;
+
+ /*
+ * Should not have been pushed if there is no tima
+ */
+ if (WARN_ON(!tima))
+ return;
+
+ eieio();
+ /* First load to pull the context, we ignore the value */
+ __raw_readl(tima + TM_SPC_PULL_OS_CTX);
+ /* Second load to recover the context state (Words 0 and 1) */
+ if (!kvmppc_xive_vcpu_has_save_restore(vcpu))
+ vcpu->arch.xive_saved_state.w01 = __raw_readq(tima + TM_QW1_OS);
+
+ /* Fixup some of the state for the next load */
+ vcpu->arch.xive_saved_state.lsmfb = 0;
+ vcpu->arch.xive_saved_state.ack = 0xff;
+ vcpu->arch.xive_pushed = 0;
+ eieio();
+}
+EXPORT_SYMBOL_GPL(kvmppc_xive_pull_vcpu);
+
+bool kvmppc_xive_rearm_escalation(struct kvm_vcpu *vcpu)
+{
+ void __iomem *esc_vaddr = (void __iomem *)vcpu->arch.xive_esc_vaddr;
+ bool ret = true;
+
+ if (!esc_vaddr)
+ return ret;
+
+ /* we are using XIVE with single escalation */
+
+ if (vcpu->arch.xive_esc_on) {
+ /*
+ * If we still have a pending escalation, abort the cede,
+ * and we must set PQ to 10 rather than 00 so that we don't
+ * potentially end up with two entries for the escalation
+ * interrupt in the XIVE interrupt queue. In that case
+ * we also don't want to set xive_esc_on to 1 here in
+ * case we race with xive_esc_irq().
+ */
+ ret = false;
+ /*
+ * The escalation interrupts are special as we don't EOI them.
+ * There is no need to use the load-after-store ordering offset
+ * to set PQ to 10 as we won't use StoreEOI.
+ */
+ __raw_readq(esc_vaddr + XIVE_ESB_SET_PQ_10);
+ } else {
+ vcpu->arch.xive_esc_on = true;
+ mb();
+ __raw_readq(esc_vaddr + XIVE_ESB_SET_PQ_00);
+ }
+ mb();
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(kvmppc_xive_rearm_escalation);
+
+/*
+ * This is a simple trigger for a generic XIVE IRQ. This must
+ * only be called for interrupts that support a trigger page
+ */
+static bool xive_irq_trigger(struct xive_irq_data *xd)
+{
+ /* This should be only for MSIs */
+ if (WARN_ON(xd->flags & XIVE_IRQ_FLAG_LSI))
+ return false;
+
+ /* Those interrupts should always have a trigger page */
+ if (WARN_ON(!xd->trig_mmio))
+ return false;
+
+ out_be64(xd->trig_mmio, 0);
+
+ return true;
+}
+
+static irqreturn_t xive_esc_irq(int irq, void *data)
+{
+ struct kvm_vcpu *vcpu = data;
+
+ vcpu->arch.irq_pending = 1;
+ smp_mb();
+ if (vcpu->arch.ceded || vcpu->arch.nested)
+ kvmppc_fast_vcpu_kick(vcpu);
+
+ /* Since we have the no-EOI flag, the interrupt is effectively
+ * disabled now. Clearing xive_esc_on means we won't bother
+ * doing so on the next entry.
+ *
+ * This also allows the entry code to know that if a PQ combination
+ * of 10 is observed while xive_esc_on is true, it means the queue
+ * contains an unprocessed escalation interrupt. We don't make use of
+ * that knowledge today but might (see comment in book3s_hv_rmhandler.S)
+ */
+ vcpu->arch.xive_esc_on = false;
+
+ /* This orders xive_esc_on = false vs. subsequent stale_p = true */
+ smp_wmb(); /* goes with smp_mb() in cleanup_single_escalation */
+
+ return IRQ_HANDLED;
+}
+
+int kvmppc_xive_attach_escalation(struct kvm_vcpu *vcpu, u8 prio,
+ bool single_escalation)
+{
+ struct kvmppc_xive_vcpu *xc = vcpu->arch.xive_vcpu;
+ struct xive_q *q = &xc->queues[prio];
+ char *name = NULL;
+ int rc;
+
+ /* Already there ? */
+ if (xc->esc_virq[prio])
+ return 0;
+
+ /* Hook up the escalation interrupt */
+ xc->esc_virq[prio] = irq_create_mapping(NULL, q->esc_irq);
+ if (!xc->esc_virq[prio]) {
+ pr_err("Failed to map escalation interrupt for queue %d of VCPU %d\n",
+ prio, xc->server_num);
+ return -EIO;
+ }
+
+ if (single_escalation)
+ name = kasprintf(GFP_KERNEL, "kvm-%d-%d",
+ vcpu->kvm->arch.lpid, xc->server_num);
+ else
+ name = kasprintf(GFP_KERNEL, "kvm-%d-%d-%d",
+ vcpu->kvm->arch.lpid, xc->server_num, prio);
+ if (!name) {
+ pr_err("Failed to allocate escalation irq name for queue %d of VCPU %d\n",
+ prio, xc->server_num);
+ rc = -ENOMEM;
+ goto error;
+ }
+
+ pr_devel("Escalation %s irq %d (prio %d)\n", name, xc->esc_virq[prio], prio);
+
+ rc = request_irq(xc->esc_virq[prio], xive_esc_irq,
+ IRQF_NO_THREAD, name, vcpu);
+ if (rc) {
+ pr_err("Failed to request escalation interrupt for queue %d of VCPU %d\n",
+ prio, xc->server_num);
+ goto error;
+ }
+ xc->esc_virq_names[prio] = name;
+
+ /* In single escalation mode, we grab the ESB MMIO of the
+ * interrupt and mask it. Also populate the VCPU v/raddr
+ * of the ESB page for use by asm entry/exit code. Finally
+ * set the XIVE_IRQ_FLAG_NO_EOI flag which will prevent the
+ * core code from performing an EOI on the escalation
+ * interrupt, thus leaving it effectively masked after
+ * it fires once.
+ */
+ if (single_escalation) {
+ struct irq_data *d = irq_get_irq_data(xc->esc_virq[prio]);
+ struct xive_irq_data *xd = irq_data_get_irq_handler_data(d);
+
+ xive_vm_esb_load(xd, XIVE_ESB_SET_PQ_01);
+ vcpu->arch.xive_esc_raddr = xd->eoi_page;
+ vcpu->arch.xive_esc_vaddr = (__force u64)xd->eoi_mmio;
+ xd->flags |= XIVE_IRQ_FLAG_NO_EOI;
+ }
+
+ return 0;
+error:
+ irq_dispose_mapping(xc->esc_virq[prio]);
+ xc->esc_virq[prio] = 0;
+ kfree(name);
+ return rc;
+}
+
+static int xive_provision_queue(struct kvm_vcpu *vcpu, u8 prio)
+{
+ struct kvmppc_xive_vcpu *xc = vcpu->arch.xive_vcpu;
+ struct kvmppc_xive *xive = xc->xive;
+ struct xive_q *q = &xc->queues[prio];
+ void *qpage;
+ int rc;
+
+ if (WARN_ON(q->qpage))
+ return 0;
+
+ /* Allocate the queue and retrieve infos on current node for now */
+ qpage = (__be32 *)__get_free_pages(GFP_KERNEL, xive->q_page_order);
+ if (!qpage) {
+ pr_err("Failed to allocate queue %d for VCPU %d\n",
+ prio, xc->server_num);
+ return -ENOMEM;
+ }
+ memset(qpage, 0, 1 << xive->q_order);
+
+ /*
+ * Reconfigure the queue. This will set q->qpage only once the
+ * queue is fully configured. This is a requirement for prio 0
+ * as we will stop doing EOIs for every IPI as soon as we observe
+ * qpage being non-NULL, and instead will only EOI when we receive
+ * corresponding queue 0 entries
+ */
+ rc = xive_native_configure_queue(xc->vp_id, q, prio, qpage,
+ xive->q_order, true);
+ if (rc)
+ pr_err("Failed to configure queue %d for VCPU %d\n",
+ prio, xc->server_num);
+ return rc;
+}
+
+/* Called with xive->lock held */
+static int xive_check_provisioning(struct kvm *kvm, u8 prio)
+{
+ struct kvmppc_xive *xive = kvm->arch.xive;
+ struct kvm_vcpu *vcpu;
+ unsigned long i;
+ int rc;
+
+ lockdep_assert_held(&xive->lock);
+
+ /* Already provisioned ? */
+ if (xive->qmap & (1 << prio))
+ return 0;
+
+ pr_devel("Provisioning prio... %d\n", prio);
+
+ /* Provision each VCPU and enable escalations if needed */
+ kvm_for_each_vcpu(i, vcpu, kvm) {
+ if (!vcpu->arch.xive_vcpu)
+ continue;
+ rc = xive_provision_queue(vcpu, prio);
+ if (rc == 0 && !kvmppc_xive_has_single_escalation(xive))
+ kvmppc_xive_attach_escalation(vcpu, prio,
+ kvmppc_xive_has_single_escalation(xive));
+ if (rc)
+ return rc;
+ }
+
+ /* Order previous stores and mark it as provisioned */
+ mb();
+ xive->qmap |= (1 << prio);
+ return 0;
+}
+
+static void xive_inc_q_pending(struct kvm *kvm, u32 server, u8 prio)
+{
+ struct kvm_vcpu *vcpu;
+ struct kvmppc_xive_vcpu *xc;
+ struct xive_q *q;
+
+ /* Locate target server */
+ vcpu = kvmppc_xive_find_server(kvm, server);
+ if (!vcpu) {
+ pr_warn("%s: Can't find server %d\n", __func__, server);
+ return;
+ }
+ xc = vcpu->arch.xive_vcpu;
+ if (WARN_ON(!xc))
+ return;
+
+ q = &xc->queues[prio];
+ atomic_inc(&q->pending_count);
+}
+
+static int xive_try_pick_queue(struct kvm_vcpu *vcpu, u8 prio)
+{
+ struct kvmppc_xive_vcpu *xc = vcpu->arch.xive_vcpu;
+ struct xive_q *q;
+ u32 max;
+
+ if (WARN_ON(!xc))
+ return -ENXIO;
+ if (!xc->valid)
+ return -ENXIO;
+
+ q = &xc->queues[prio];
+ if (WARN_ON(!q->qpage))
+ return -ENXIO;
+
+ /* Calculate max number of interrupts in that queue. */
+ max = (q->msk + 1) - XIVE_Q_GAP;
+ return atomic_add_unless(&q->count, 1, max) ? 0 : -EBUSY;
+}
+
+int kvmppc_xive_select_target(struct kvm *kvm, u32 *server, u8 prio)
+{
+ struct kvm_vcpu *vcpu;
+ unsigned long i;
+ int rc;
+
+ /* Locate target server */
+ vcpu = kvmppc_xive_find_server(kvm, *server);
+ if (!vcpu) {
+ pr_devel("Can't find server %d\n", *server);
+ return -EINVAL;
+ }
+
+ pr_devel("Finding irq target on 0x%x/%d...\n", *server, prio);
+
+ /* Try pick it */
+ rc = xive_try_pick_queue(vcpu, prio);
+ if (rc == 0)
+ return rc;
+
+ pr_devel(" .. failed, looking up candidate...\n");
+
+ /* Failed, pick another VCPU */
+ kvm_for_each_vcpu(i, vcpu, kvm) {
+ if (!vcpu->arch.xive_vcpu)
+ continue;
+ rc = xive_try_pick_queue(vcpu, prio);
+ if (rc == 0) {
+ *server = vcpu->arch.xive_vcpu->server_num;
+ pr_devel(" found on 0x%x/%d\n", *server, prio);
+ return rc;
+ }
+ }
+ pr_devel(" no available target !\n");
+
+ /* No available target ! */
+ return -EBUSY;
+}
+
+static u8 xive_lock_and_mask(struct kvmppc_xive *xive,
+ struct kvmppc_xive_src_block *sb,
+ struct kvmppc_xive_irq_state *state)
+{
+ struct xive_irq_data *xd;
+ u32 hw_num;
+ u8 old_prio;
+ u64 val;
+
+ /*
+ * Take the lock, set masked, try again if racing
+ * with H_EOI
+ */
+ for (;;) {
+ arch_spin_lock(&sb->lock);
+ old_prio = state->guest_priority;
+ state->guest_priority = MASKED;
+ mb();
+ if (!state->in_eoi)
+ break;
+ state->guest_priority = old_prio;
+ arch_spin_unlock(&sb->lock);
+ }
+
+ /* No change ? Bail */
+ if (old_prio == MASKED)
+ return old_prio;
+
+ /* Get the right irq */
+ kvmppc_xive_select_irq(state, &hw_num, &xd);
+
+ /* Set PQ to 10, return old P and old Q and remember them */
+ val = xive_vm_esb_load(xd, XIVE_ESB_SET_PQ_10);
+ state->old_p = !!(val & 2);
+ state->old_q = !!(val & 1);
+
+ /*
+ * Synchronize hardware to sensure the queues are updated when
+ * masking
+ */
+ xive_native_sync_source(hw_num);
+
+ return old_prio;
+}
+
+static void xive_lock_for_unmask(struct kvmppc_xive_src_block *sb,
+ struct kvmppc_xive_irq_state *state)
+{
+ /*
+ * Take the lock try again if racing with H_EOI
+ */
+ for (;;) {
+ arch_spin_lock(&sb->lock);
+ if (!state->in_eoi)
+ break;
+ arch_spin_unlock(&sb->lock);
+ }
+}
+
+static void xive_finish_unmask(struct kvmppc_xive *xive,
+ struct kvmppc_xive_src_block *sb,
+ struct kvmppc_xive_irq_state *state,
+ u8 prio)
+{
+ struct xive_irq_data *xd;
+ u32 hw_num;
+
+ /* If we aren't changing a thing, move on */
+ if (state->guest_priority != MASKED)
+ goto bail;
+
+ /* Get the right irq */
+ kvmppc_xive_select_irq(state, &hw_num, &xd);
+
+ /* Old Q set, set PQ to 11 */
+ if (state->old_q)
+ xive_vm_esb_load(xd, XIVE_ESB_SET_PQ_11);
+
+ /*
+ * If not old P, then perform an "effective" EOI,
+ * on the source. This will handle the cases where
+ * FW EOI is needed.
+ */
+ if (!state->old_p)
+ xive_vm_source_eoi(hw_num, xd);
+
+ /* Synchronize ordering and mark unmasked */
+ mb();
+bail:
+ state->guest_priority = prio;
+}
+
+/*
+ * Target an interrupt to a given server/prio, this will fallback
+ * to another server if necessary and perform the HW targetting
+ * updates as needed
+ *
+ * NOTE: Must be called with the state lock held
+ */
+static int xive_target_interrupt(struct kvm *kvm,
+ struct kvmppc_xive_irq_state *state,
+ u32 server, u8 prio)
+{
+ struct kvmppc_xive *xive = kvm->arch.xive;
+ u32 hw_num;
+ int rc;
+
+ /*
+ * This will return a tentative server and actual
+ * priority. The count for that new target will have
+ * already been incremented.
+ */
+ rc = kvmppc_xive_select_target(kvm, &server, prio);
+
+ /*
+ * We failed to find a target ? Not much we can do
+ * at least until we support the GIQ.
+ */
+ if (rc)
+ return rc;
+
+ /*
+ * Increment the old queue pending count if there
+ * was one so that the old queue count gets adjusted later
+ * when observed to be empty.
+ */
+ if (state->act_priority != MASKED)
+ xive_inc_q_pending(kvm,
+ state->act_server,
+ state->act_priority);
+ /*
+ * Update state and HW
+ */
+ state->act_priority = prio;
+ state->act_server = server;
+
+ /* Get the right irq */
+ kvmppc_xive_select_irq(state, &hw_num, NULL);
+
+ return xive_native_configure_irq(hw_num,
+ kvmppc_xive_vp(xive, server),
+ prio, state->number);
+}
+
+/*
+ * Targetting rules: In order to avoid losing track of
+ * pending interrupts across mask and unmask, which would
+ * allow queue overflows, we implement the following rules:
+ *
+ * - Unless it was never enabled (or we run out of capacity)
+ * an interrupt is always targetted at a valid server/queue
+ * pair even when "masked" by the guest. This pair tends to
+ * be the last one used but it can be changed under some
+ * circumstances. That allows us to separate targetting
+ * from masking, we only handle accounting during (re)targetting,
+ * this also allows us to let an interrupt drain into its target
+ * queue after masking, avoiding complex schemes to remove
+ * interrupts out of remote processor queues.
+ *
+ * - When masking, we set PQ to 10 and save the previous value
+ * of P and Q.
+ *
+ * - When unmasking, if saved Q was set, we set PQ to 11
+ * otherwise we leave PQ to the HW state which will be either
+ * 10 if nothing happened or 11 if the interrupt fired while
+ * masked. Effectively we are OR'ing the previous Q into the
+ * HW Q.
+ *
+ * Then if saved P is clear, we do an effective EOI (Q->P->Trigger)
+ * which will unmask the interrupt and shoot a new one if Q was
+ * set.
+ *
+ * Otherwise (saved P is set) we leave PQ unchanged (so 10 or 11,
+ * effectively meaning an H_EOI from the guest is still expected
+ * for that interrupt).
+ *
+ * - If H_EOI occurs while masked, we clear the saved P.
+ *
+ * - When changing target, we account on the new target and
+ * increment a separate "pending" counter on the old one.
+ * This pending counter will be used to decrement the old
+ * target's count when its queue has been observed empty.
+ */
+
+int kvmppc_xive_set_xive(struct kvm *kvm, u32 irq, u32 server,
+ u32 priority)
+{
+ struct kvmppc_xive *xive = kvm->arch.xive;
+ struct kvmppc_xive_src_block *sb;
+ struct kvmppc_xive_irq_state *state;
+ u8 new_act_prio;
+ int rc = 0;
+ u16 idx;
+
+ if (!xive)
+ return -ENODEV;
+
+ pr_devel("set_xive ! irq 0x%x server 0x%x prio %d\n",
+ irq, server, priority);
+
+ /* First, check provisioning of queues */
+ if (priority != MASKED) {
+ mutex_lock(&xive->lock);
+ rc = xive_check_provisioning(xive->kvm,
+ xive_prio_from_guest(priority));
+ mutex_unlock(&xive->lock);
+ }
+ if (rc) {
+ pr_devel(" provisioning failure %d !\n", rc);
+ return rc;
+ }
+
+ sb = kvmppc_xive_find_source(xive, irq, &idx);
+ if (!sb)
+ return -EINVAL;
+ state = &sb->irq_state[idx];
+
+ /*
+ * We first handle masking/unmasking since the locking
+ * might need to be retried due to EOIs, we'll handle
+ * targetting changes later. These functions will return
+ * with the SB lock held.
+ *
+ * xive_lock_and_mask() will also set state->guest_priority
+ * but won't otherwise change other fields of the state.
+ *
+ * xive_lock_for_unmask will not actually unmask, this will
+ * be done later by xive_finish_unmask() once the targetting
+ * has been done, so we don't try to unmask an interrupt
+ * that hasn't yet been targetted.
+ */
+ if (priority == MASKED)
+ xive_lock_and_mask(xive, sb, state);
+ else
+ xive_lock_for_unmask(sb, state);
+
+
+ /*
+ * Then we handle targetting.
+ *
+ * First calculate a new "actual priority"
+ */
+ new_act_prio = state->act_priority;
+ if (priority != MASKED)
+ new_act_prio = xive_prio_from_guest(priority);
+
+ pr_devel(" new_act_prio=%x act_server=%x act_prio=%x\n",
+ new_act_prio, state->act_server, state->act_priority);
+
+ /*
+ * Then check if we actually need to change anything,
+ *
+ * The condition for re-targetting the interrupt is that
+ * we have a valid new priority (new_act_prio is not 0xff)
+ * and either the server or the priority changed.
+ *
+ * Note: If act_priority was ff and the new priority is
+ * also ff, we don't do anything and leave the interrupt
+ * untargetted. An attempt of doing an int_on on an
+ * untargetted interrupt will fail. If that is a problem
+ * we could initialize interrupts with valid default
+ */
+
+ if (new_act_prio != MASKED &&
+ (state->act_server != server ||
+ state->act_priority != new_act_prio))
+ rc = xive_target_interrupt(kvm, state, server, new_act_prio);
+
+ /*
+ * Perform the final unmasking of the interrupt source
+ * if necessary
+ */
+ if (priority != MASKED)
+ xive_finish_unmask(xive, sb, state, priority);
+
+ /*
+ * Finally Update saved_priority to match. Only int_on/off
+ * set this field to a different value.
+ */
+ state->saved_priority = priority;
+
+ arch_spin_unlock(&sb->lock);
+ return rc;
+}
+
+int kvmppc_xive_get_xive(struct kvm *kvm, u32 irq, u32 *server,
+ u32 *priority)
+{
+ struct kvmppc_xive *xive = kvm->arch.xive;
+ struct kvmppc_xive_src_block *sb;
+ struct kvmppc_xive_irq_state *state;
+ u16 idx;
+
+ if (!xive)
+ return -ENODEV;
+
+ sb = kvmppc_xive_find_source(xive, irq, &idx);
+ if (!sb)
+ return -EINVAL;
+ state = &sb->irq_state[idx];
+ arch_spin_lock(&sb->lock);
+ *server = state->act_server;
+ *priority = state->guest_priority;
+ arch_spin_unlock(&sb->lock);
+
+ return 0;
+}
+
+int kvmppc_xive_int_on(struct kvm *kvm, u32 irq)
+{
+ struct kvmppc_xive *xive = kvm->arch.xive;
+ struct kvmppc_xive_src_block *sb;
+ struct kvmppc_xive_irq_state *state;
+ u16 idx;
+
+ if (!xive)
+ return -ENODEV;
+
+ sb = kvmppc_xive_find_source(xive, irq, &idx);
+ if (!sb)
+ return -EINVAL;
+ state = &sb->irq_state[idx];
+
+ pr_devel("int_on(irq=0x%x)\n", irq);
+
+ /*
+ * Check if interrupt was not targetted
+ */
+ if (state->act_priority == MASKED) {
+ pr_devel("int_on on untargetted interrupt\n");
+ return -EINVAL;
+ }
+
+ /* If saved_priority is 0xff, do nothing */
+ if (state->saved_priority == MASKED)
+ return 0;
+
+ /*
+ * Lock and unmask it.
+ */
+ xive_lock_for_unmask(sb, state);
+ xive_finish_unmask(xive, sb, state, state->saved_priority);
+ arch_spin_unlock(&sb->lock);
+
+ return 0;
+}
+
+int kvmppc_xive_int_off(struct kvm *kvm, u32 irq)
+{
+ struct kvmppc_xive *xive = kvm->arch.xive;
+ struct kvmppc_xive_src_block *sb;
+ struct kvmppc_xive_irq_state *state;
+ u16 idx;
+
+ if (!xive)
+ return -ENODEV;
+
+ sb = kvmppc_xive_find_source(xive, irq, &idx);
+ if (!sb)
+ return -EINVAL;
+ state = &sb->irq_state[idx];
+
+ pr_devel("int_off(irq=0x%x)\n", irq);
+
+ /*
+ * Lock and mask
+ */
+ state->saved_priority = xive_lock_and_mask(xive, sb, state);
+ arch_spin_unlock(&sb->lock);
+
+ return 0;
+}
+
+static bool xive_restore_pending_irq(struct kvmppc_xive *xive, u32 irq)
+{
+ struct kvmppc_xive_src_block *sb;
+ struct kvmppc_xive_irq_state *state;
+ u16 idx;
+
+ sb = kvmppc_xive_find_source(xive, irq, &idx);
+ if (!sb)
+ return false;
+ state = &sb->irq_state[idx];
+ if (!state->valid)
+ return false;
+
+ /*
+ * Trigger the IPI. This assumes we never restore a pass-through
+ * interrupt which should be safe enough
+ */
+ xive_irq_trigger(&state->ipi_data);
+
+ return true;
+}
+
+u64 kvmppc_xive_get_icp(struct kvm_vcpu *vcpu)
+{
+ struct kvmppc_xive_vcpu *xc = vcpu->arch.xive_vcpu;
+
+ if (!xc)
+ return 0;
+
+ /* Return the per-cpu state for state saving/migration */
+ return (u64)xc->cppr << KVM_REG_PPC_ICP_CPPR_SHIFT |
+ (u64)xc->mfrr << KVM_REG_PPC_ICP_MFRR_SHIFT |
+ (u64)0xff << KVM_REG_PPC_ICP_PPRI_SHIFT;
+}
+
+int kvmppc_xive_set_icp(struct kvm_vcpu *vcpu, u64 icpval)
+{
+ struct kvmppc_xive_vcpu *xc = vcpu->arch.xive_vcpu;
+ struct kvmppc_xive *xive = vcpu->kvm->arch.xive;
+ u8 cppr, mfrr;
+ u32 xisr;
+
+ if (!xc || !xive)
+ return -ENOENT;
+
+ /* Grab individual state fields. We don't use pending_pri */
+ cppr = icpval >> KVM_REG_PPC_ICP_CPPR_SHIFT;
+ xisr = (icpval >> KVM_REG_PPC_ICP_XISR_SHIFT) &
+ KVM_REG_PPC_ICP_XISR_MASK;
+ mfrr = icpval >> KVM_REG_PPC_ICP_MFRR_SHIFT;
+
+ pr_devel("set_icp vcpu %d cppr=0x%x mfrr=0x%x xisr=0x%x\n",
+ xc->server_num, cppr, mfrr, xisr);
+
+ /*
+ * We can't update the state of a "pushed" VCPU, but that
+ * shouldn't happen because the vcpu->mutex makes running a
+ * vcpu mutually exclusive with doing one_reg get/set on it.
+ */
+ if (WARN_ON(vcpu->arch.xive_pushed))
+ return -EIO;
+
+ /* Update VCPU HW saved state */
+ vcpu->arch.xive_saved_state.cppr = cppr;
+ xc->hw_cppr = xc->cppr = cppr;
+
+ /*
+ * Update MFRR state. If it's not 0xff, we mark the VCPU as
+ * having a pending MFRR change, which will re-evaluate the
+ * target. The VCPU will thus potentially get a spurious
+ * interrupt but that's not a big deal.
+ */
+ xc->mfrr = mfrr;
+ if (mfrr < cppr)
+ xive_irq_trigger(&xc->vp_ipi_data);
+
+ /*
+ * Now saved XIRR is "interesting". It means there's something in
+ * the legacy "1 element" queue... for an IPI we simply ignore it,
+ * as the MFRR restore will handle that. For anything else we need
+ * to force a resend of the source.
+ * However the source may not have been setup yet. If that's the
+ * case, we keep that info and increment a counter in the xive to
+ * tell subsequent xive_set_source() to go look.
+ */
+ if (xisr > XICS_IPI && !xive_restore_pending_irq(xive, xisr)) {
+ xc->delayed_irq = xisr;
+ xive->delayed_irqs++;
+ pr_devel(" xisr restore delayed\n");
+ }
+
+ return 0;
+}
+
+int kvmppc_xive_set_mapped(struct kvm *kvm, unsigned long guest_irq,
+ unsigned long host_irq)
+{
+ struct kvmppc_xive *xive = kvm->arch.xive;
+ struct kvmppc_xive_src_block *sb;
+ struct kvmppc_xive_irq_state *state;
+ struct irq_data *host_data =
+ irq_domain_get_irq_data(irq_get_default_host(), host_irq);
+ unsigned int hw_irq = (unsigned int)irqd_to_hwirq(host_data);
+ u16 idx;
+ u8 prio;
+ int rc;
+
+ if (!xive)
+ return -ENODEV;
+
+ pr_debug("%s: GIRQ 0x%lx host IRQ %ld XIVE HW IRQ 0x%x\n",
+ __func__, guest_irq, host_irq, hw_irq);
+
+ sb = kvmppc_xive_find_source(xive, guest_irq, &idx);
+ if (!sb)
+ return -EINVAL;
+ state = &sb->irq_state[idx];
+
+ /*
+ * Mark the passed-through interrupt as going to a VCPU,
+ * this will prevent further EOIs and similar operations
+ * from the XIVE code. It will also mask the interrupt
+ * to either PQ=10 or 11 state, the latter if the interrupt
+ * is pending. This will allow us to unmask or retrigger it
+ * after routing it to the guest with a simple EOI.
+ *
+ * The "state" argument is a "token", all it needs is to be
+ * non-NULL to switch to passed-through or NULL for the
+ * other way around. We may not yet have an actual VCPU
+ * target here and we don't really care.
+ */
+ rc = irq_set_vcpu_affinity(host_irq, state);
+ if (rc) {
+ pr_err("Failed to set VCPU affinity for host IRQ %ld\n", host_irq);
+ return rc;
+ }
+
+ /*
+ * Mask and read state of IPI. We need to know if its P bit
+ * is set as that means it's potentially already using a
+ * queue entry in the target
+ */
+ prio = xive_lock_and_mask(xive, sb, state);
+ pr_devel(" old IPI prio %02x P:%d Q:%d\n", prio,
+ state->old_p, state->old_q);
+
+ /* Turn the IPI hard off */
+ xive_vm_esb_load(&state->ipi_data, XIVE_ESB_SET_PQ_01);
+
+ /*
+ * Reset ESB guest mapping. Needed when ESB pages are exposed
+ * to the guest in XIVE native mode
+ */
+ if (xive->ops && xive->ops->reset_mapped)
+ xive->ops->reset_mapped(kvm, guest_irq);
+
+ /* Grab info about irq */
+ state->pt_number = hw_irq;
+ state->pt_data = irq_data_get_irq_handler_data(host_data);
+
+ /*
+ * Configure the IRQ to match the existing configuration of
+ * the IPI if it was already targetted. Otherwise this will
+ * mask the interrupt in a lossy way (act_priority is 0xff)
+ * which is fine for a never started interrupt.
+ */
+ xive_native_configure_irq(hw_irq,
+ kvmppc_xive_vp(xive, state->act_server),
+ state->act_priority, state->number);
+
+ /*
+ * We do an EOI to enable the interrupt (and retrigger if needed)
+ * if the guest has the interrupt unmasked and the P bit was *not*
+ * set in the IPI. If it was set, we know a slot may still be in
+ * use in the target queue thus we have to wait for a guest
+ * originated EOI
+ */
+ if (prio != MASKED && !state->old_p)
+ xive_vm_source_eoi(hw_irq, state->pt_data);
+
+ /* Clear old_p/old_q as they are no longer relevant */
+ state->old_p = state->old_q = false;
+
+ /* Restore guest prio (unlocks EOI) */
+ mb();
+ state->guest_priority = prio;
+ arch_spin_unlock(&sb->lock);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(kvmppc_xive_set_mapped);
+
+int kvmppc_xive_clr_mapped(struct kvm *kvm, unsigned long guest_irq,
+ unsigned long host_irq)
+{
+ struct kvmppc_xive *xive = kvm->arch.xive;
+ struct kvmppc_xive_src_block *sb;
+ struct kvmppc_xive_irq_state *state;
+ u16 idx;
+ u8 prio;
+ int rc;
+
+ if (!xive)
+ return -ENODEV;
+
+ pr_debug("%s: GIRQ 0x%lx host IRQ %ld\n", __func__, guest_irq, host_irq);
+
+ sb = kvmppc_xive_find_source(xive, guest_irq, &idx);
+ if (!sb)
+ return -EINVAL;
+ state = &sb->irq_state[idx];
+
+ /*
+ * Mask and read state of IRQ. We need to know if its P bit
+ * is set as that means it's potentially already using a
+ * queue entry in the target
+ */
+ prio = xive_lock_and_mask(xive, sb, state);
+ pr_devel(" old IRQ prio %02x P:%d Q:%d\n", prio,
+ state->old_p, state->old_q);
+
+ /*
+ * If old_p is set, the interrupt is pending, we switch it to
+ * PQ=11. This will force a resend in the host so the interrupt
+ * isn't lost to whatever host driver may pick it up
+ */
+ if (state->old_p)
+ xive_vm_esb_load(state->pt_data, XIVE_ESB_SET_PQ_11);
+
+ /* Release the passed-through interrupt to the host */
+ rc = irq_set_vcpu_affinity(host_irq, NULL);
+ if (rc) {
+ pr_err("Failed to clr VCPU affinity for host IRQ %ld\n", host_irq);
+ return rc;
+ }
+
+ /* Forget about the IRQ */
+ state->pt_number = 0;
+ state->pt_data = NULL;
+
+ /*
+ * Reset ESB guest mapping. Needed when ESB pages are exposed
+ * to the guest in XIVE native mode
+ */
+ if (xive->ops && xive->ops->reset_mapped) {
+ xive->ops->reset_mapped(kvm, guest_irq);
+ }
+
+ /* Reconfigure the IPI */
+ xive_native_configure_irq(state->ipi_number,
+ kvmppc_xive_vp(xive, state->act_server),
+ state->act_priority, state->number);
+
+ /*
+ * If old_p is set (we have a queue entry potentially
+ * occupied) or the interrupt is masked, we set the IPI
+ * to PQ=10 state. Otherwise we just re-enable it (PQ=00).
+ */
+ if (prio == MASKED || state->old_p)
+ xive_vm_esb_load(&state->ipi_data, XIVE_ESB_SET_PQ_10);
+ else
+ xive_vm_esb_load(&state->ipi_data, XIVE_ESB_SET_PQ_00);
+
+ /* Restore guest prio (unlocks EOI) */
+ mb();
+ state->guest_priority = prio;
+ arch_spin_unlock(&sb->lock);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(kvmppc_xive_clr_mapped);
+
+void kvmppc_xive_disable_vcpu_interrupts(struct kvm_vcpu *vcpu)
+{
+ struct kvmppc_xive_vcpu *xc = vcpu->arch.xive_vcpu;
+ struct kvm *kvm = vcpu->kvm;
+ struct kvmppc_xive *xive = kvm->arch.xive;
+ int i, j;
+
+ for (i = 0; i <= xive->max_sbid; i++) {
+ struct kvmppc_xive_src_block *sb = xive->src_blocks[i];
+
+ if (!sb)
+ continue;
+ for (j = 0; j < KVMPPC_XICS_IRQ_PER_ICS; j++) {
+ struct kvmppc_xive_irq_state *state = &sb->irq_state[j];
+
+ if (!state->valid)
+ continue;
+ if (state->act_priority == MASKED)
+ continue;
+ if (state->act_server != xc->server_num)
+ continue;
+
+ /* Clean it up */
+ arch_spin_lock(&sb->lock);
+ state->act_priority = MASKED;
+ xive_vm_esb_load(&state->ipi_data, XIVE_ESB_SET_PQ_01);
+ xive_native_configure_irq(state->ipi_number, 0, MASKED, 0);
+ if (state->pt_number) {
+ xive_vm_esb_load(state->pt_data, XIVE_ESB_SET_PQ_01);
+ xive_native_configure_irq(state->pt_number, 0, MASKED, 0);
+ }
+ arch_spin_unlock(&sb->lock);
+ }
+ }
+
+ /* Disable vcpu's escalation interrupt */
+ if (vcpu->arch.xive_esc_on) {
+ __raw_readq((void __iomem *)(vcpu->arch.xive_esc_vaddr +
+ XIVE_ESB_SET_PQ_01));
+ vcpu->arch.xive_esc_on = false;
+ }
+
+ /*
+ * Clear pointers to escalation interrupt ESB.
+ * This is safe because the vcpu->mutex is held, preventing
+ * any other CPU from concurrently executing a KVM_RUN ioctl.
+ */
+ vcpu->arch.xive_esc_vaddr = 0;
+ vcpu->arch.xive_esc_raddr = 0;
+}
+
+/*
+ * In single escalation mode, the escalation interrupt is marked so
+ * that EOI doesn't re-enable it, but just sets the stale_p flag to
+ * indicate that the P bit has already been dealt with. However, the
+ * assembly code that enters the guest sets PQ to 00 without clearing
+ * stale_p (because it has no easy way to address it). Hence we have
+ * to adjust stale_p before shutting down the interrupt.
+ */
+void xive_cleanup_single_escalation(struct kvm_vcpu *vcpu,
+ struct kvmppc_xive_vcpu *xc, int irq)
+{
+ struct irq_data *d = irq_get_irq_data(irq);
+ struct xive_irq_data *xd = irq_data_get_irq_handler_data(d);
+
+ /*
+ * This slightly odd sequence gives the right result
+ * (i.e. stale_p set if xive_esc_on is false) even if
+ * we race with xive_esc_irq() and xive_irq_eoi().
+ */
+ xd->stale_p = false;
+ smp_mb(); /* paired with smb_wmb in xive_esc_irq */
+ if (!vcpu->arch.xive_esc_on)
+ xd->stale_p = true;
+}
+
+void kvmppc_xive_cleanup_vcpu(struct kvm_vcpu *vcpu)
+{
+ struct kvmppc_xive_vcpu *xc = vcpu->arch.xive_vcpu;
+ struct kvmppc_xive *xive = vcpu->kvm->arch.xive;
+ int i;
+
+ if (!kvmppc_xics_enabled(vcpu))
+ return;
+
+ if (!xc)
+ return;
+
+ pr_devel("cleanup_vcpu(cpu=%d)\n", xc->server_num);
+
+ /* Ensure no interrupt is still routed to that VP */
+ xc->valid = false;
+ kvmppc_xive_disable_vcpu_interrupts(vcpu);
+
+ /* Mask the VP IPI */
+ xive_vm_esb_load(&xc->vp_ipi_data, XIVE_ESB_SET_PQ_01);
+
+ /* Free escalations */
+ for (i = 0; i < KVMPPC_XIVE_Q_COUNT; i++) {
+ if (xc->esc_virq[i]) {
+ if (kvmppc_xive_has_single_escalation(xc->xive))
+ xive_cleanup_single_escalation(vcpu, xc,
+ xc->esc_virq[i]);
+ free_irq(xc->esc_virq[i], vcpu);
+ irq_dispose_mapping(xc->esc_virq[i]);
+ kfree(xc->esc_virq_names[i]);
+ }
+ }
+
+ /* Disable the VP */
+ xive_native_disable_vp(xc->vp_id);
+
+ /* Clear the cam word so guest entry won't try to push context */
+ vcpu->arch.xive_cam_word = 0;
+
+ /* Free the queues */
+ for (i = 0; i < KVMPPC_XIVE_Q_COUNT; i++) {
+ struct xive_q *q = &xc->queues[i];
+
+ xive_native_disable_queue(xc->vp_id, q, i);
+ if (q->qpage) {
+ free_pages((unsigned long)q->qpage,
+ xive->q_page_order);
+ q->qpage = NULL;
+ }
+ }
+
+ /* Free the IPI */
+ if (xc->vp_ipi) {
+ xive_cleanup_irq_data(&xc->vp_ipi_data);
+ xive_native_free_irq(xc->vp_ipi);
+ }
+ /* Free the VP */
+ kfree(xc);
+
+ /* Cleanup the vcpu */
+ vcpu->arch.irq_type = KVMPPC_IRQ_DEFAULT;
+ vcpu->arch.xive_vcpu = NULL;
+}
+
+static bool kvmppc_xive_vcpu_id_valid(struct kvmppc_xive *xive, u32 cpu)
+{
+ /* We have a block of xive->nr_servers VPs. We just need to check
+ * packed vCPU ids are below that.
+ */
+ return kvmppc_pack_vcpu_id(xive->kvm, cpu) < xive->nr_servers;
+}
+
+int kvmppc_xive_compute_vp_id(struct kvmppc_xive *xive, u32 cpu, u32 *vp)
+{
+ u32 vp_id;
+
+ if (!kvmppc_xive_vcpu_id_valid(xive, cpu)) {
+ pr_devel("Out of bounds !\n");
+ return -EINVAL;
+ }
+
+ if (xive->vp_base == XIVE_INVALID_VP) {
+ xive->vp_base = xive_native_alloc_vp_block(xive->nr_servers);
+ pr_devel("VP_Base=%x nr_servers=%d\n", xive->vp_base, xive->nr_servers);
+
+ if (xive->vp_base == XIVE_INVALID_VP)
+ return -ENOSPC;
+ }
+
+ vp_id = kvmppc_xive_vp(xive, cpu);
+ if (kvmppc_xive_vp_in_use(xive->kvm, vp_id)) {
+ pr_devel("Duplicate !\n");
+ return -EEXIST;
+ }
+
+ *vp = vp_id;
+
+ return 0;
+}
+
+int kvmppc_xive_connect_vcpu(struct kvm_device *dev,
+ struct kvm_vcpu *vcpu, u32 cpu)
+{
+ struct kvmppc_xive *xive = dev->private;
+ struct kvmppc_xive_vcpu *xc;
+ int i, r = -EBUSY;
+ u32 vp_id;
+
+ pr_devel("connect_vcpu(cpu=%d)\n", cpu);
+
+ if (dev->ops != &kvm_xive_ops) {
+ pr_devel("Wrong ops !\n");
+ return -EPERM;
+ }
+ if (xive->kvm != vcpu->kvm)
+ return -EPERM;
+ if (vcpu->arch.irq_type != KVMPPC_IRQ_DEFAULT)
+ return -EBUSY;
+
+ /* We need to synchronize with queue provisioning */
+ mutex_lock(&xive->lock);
+
+ r = kvmppc_xive_compute_vp_id(xive, cpu, &vp_id);
+ if (r)
+ goto bail;
+
+ xc = kzalloc(sizeof(*xc), GFP_KERNEL);
+ if (!xc) {
+ r = -ENOMEM;
+ goto bail;
+ }
+
+ vcpu->arch.xive_vcpu = xc;
+ xc->xive = xive;
+ xc->vcpu = vcpu;
+ xc->server_num = cpu;
+ xc->vp_id = vp_id;
+ xc->mfrr = 0xff;
+ xc->valid = true;
+
+ r = xive_native_get_vp_info(xc->vp_id, &xc->vp_cam, &xc->vp_chip_id);
+ if (r)
+ goto bail;
+
+ if (!kvmppc_xive_check_save_restore(vcpu)) {
+ pr_err("inconsistent save-restore setup for VCPU %d\n", cpu);
+ r = -EIO;
+ goto bail;
+ }
+
+ /* Configure VCPU fields for use by assembly push/pull */
+ vcpu->arch.xive_saved_state.w01 = cpu_to_be64(0xff000000);
+ vcpu->arch.xive_cam_word = cpu_to_be32(xc->vp_cam | TM_QW1W2_VO);
+
+ /* Allocate IPI */
+ xc->vp_ipi = xive_native_alloc_irq();
+ if (!xc->vp_ipi) {
+ pr_err("Failed to allocate xive irq for VCPU IPI\n");
+ r = -EIO;
+ goto bail;
+ }
+ pr_devel(" IPI=0x%x\n", xc->vp_ipi);
+
+ r = xive_native_populate_irq_data(xc->vp_ipi, &xc->vp_ipi_data);
+ if (r)
+ goto bail;
+
+ /*
+ * Enable the VP first as the single escalation mode will
+ * affect escalation interrupts numbering
+ */
+ r = xive_native_enable_vp(xc->vp_id, kvmppc_xive_has_single_escalation(xive));
+ if (r) {
+ pr_err("Failed to enable VP in OPAL, err %d\n", r);
+ goto bail;
+ }
+
+ /*
+ * Initialize queues. Initially we set them all for no queueing
+ * and we enable escalation for queue 0 only which we'll use for
+ * our mfrr change notifications. If the VCPU is hot-plugged, we
+ * do handle provisioning however based on the existing "map"
+ * of enabled queues.
+ */
+ for (i = 0; i < KVMPPC_XIVE_Q_COUNT; i++) {
+ struct xive_q *q = &xc->queues[i];
+
+ /* Single escalation, no queue 7 */
+ if (i == 7 && kvmppc_xive_has_single_escalation(xive))
+ break;
+
+ /* Is queue already enabled ? Provision it */
+ if (xive->qmap & (1 << i)) {
+ r = xive_provision_queue(vcpu, i);
+ if (r == 0 && !kvmppc_xive_has_single_escalation(xive))
+ kvmppc_xive_attach_escalation(
+ vcpu, i, kvmppc_xive_has_single_escalation(xive));
+ if (r)
+ goto bail;
+ } else {
+ r = xive_native_configure_queue(xc->vp_id,
+ q, i, NULL, 0, true);
+ if (r) {
+ pr_err("Failed to configure queue %d for VCPU %d\n",
+ i, cpu);
+ goto bail;
+ }
+ }
+ }
+
+ /* If not done above, attach priority 0 escalation */
+ r = kvmppc_xive_attach_escalation(vcpu, 0, kvmppc_xive_has_single_escalation(xive));
+ if (r)
+ goto bail;
+
+ /* Route the IPI */
+ r = xive_native_configure_irq(xc->vp_ipi, xc->vp_id, 0, XICS_IPI);
+ if (!r)
+ xive_vm_esb_load(&xc->vp_ipi_data, XIVE_ESB_SET_PQ_00);
+
+bail:
+ mutex_unlock(&xive->lock);
+ if (r) {
+ kvmppc_xive_cleanup_vcpu(vcpu);
+ return r;
+ }
+
+ vcpu->arch.irq_type = KVMPPC_IRQ_XICS;
+ return 0;
+}
+
+/*
+ * Scanning of queues before/after migration save
+ */
+static void xive_pre_save_set_queued(struct kvmppc_xive *xive, u32 irq)
+{
+ struct kvmppc_xive_src_block *sb;
+ struct kvmppc_xive_irq_state *state;
+ u16 idx;
+
+ sb = kvmppc_xive_find_source(xive, irq, &idx);
+ if (!sb)
+ return;
+
+ state = &sb->irq_state[idx];
+
+ /* Some sanity checking */
+ if (!state->valid) {
+ pr_err("invalid irq 0x%x in cpu queue!\n", irq);
+ return;
+ }
+
+ /*
+ * If the interrupt is in a queue it should have P set.
+ * We warn so that gets reported. A backtrace isn't useful
+ * so no need to use a WARN_ON.
+ */
+ if (!state->saved_p)
+ pr_err("Interrupt 0x%x is marked in a queue but P not set !\n", irq);
+
+ /* Set flag */
+ state->in_queue = true;
+}
+
+static void xive_pre_save_mask_irq(struct kvmppc_xive *xive,
+ struct kvmppc_xive_src_block *sb,
+ u32 irq)
+{
+ struct kvmppc_xive_irq_state *state = &sb->irq_state[irq];
+
+ if (!state->valid)
+ return;
+
+ /* Mask and save state, this will also sync HW queues */
+ state->saved_scan_prio = xive_lock_and_mask(xive, sb, state);
+
+ /* Transfer P and Q */
+ state->saved_p = state->old_p;
+ state->saved_q = state->old_q;
+
+ /* Unlock */
+ arch_spin_unlock(&sb->lock);
+}
+
+static void xive_pre_save_unmask_irq(struct kvmppc_xive *xive,
+ struct kvmppc_xive_src_block *sb,
+ u32 irq)
+{
+ struct kvmppc_xive_irq_state *state = &sb->irq_state[irq];
+
+ if (!state->valid)
+ return;
+
+ /*
+ * Lock / exclude EOI (not technically necessary if the
+ * guest isn't running concurrently. If this becomes a
+ * performance issue we can probably remove the lock.
+ */
+ xive_lock_for_unmask(sb, state);
+
+ /* Restore mask/prio if it wasn't masked */
+ if (state->saved_scan_prio != MASKED)
+ xive_finish_unmask(xive, sb, state, state->saved_scan_prio);
+
+ /* Unlock */
+ arch_spin_unlock(&sb->lock);
+}
+
+static void xive_pre_save_queue(struct kvmppc_xive *xive, struct xive_q *q)
+{
+ u32 idx = q->idx;
+ u32 toggle = q->toggle;
+ u32 irq;
+
+ do {
+ irq = __xive_read_eq(q->qpage, q->msk, &idx, &toggle);
+ if (irq > XICS_IPI)
+ xive_pre_save_set_queued(xive, irq);
+ } while(irq);
+}
+
+static void xive_pre_save_scan(struct kvmppc_xive *xive)
+{
+ struct kvm_vcpu *vcpu = NULL;
+ unsigned long i;
+ int j;
+
+ /*
+ * See comment in xive_get_source() about how this
+ * work. Collect a stable state for all interrupts
+ */
+ for (i = 0; i <= xive->max_sbid; i++) {
+ struct kvmppc_xive_src_block *sb = xive->src_blocks[i];
+ if (!sb)
+ continue;
+ for (j = 0; j < KVMPPC_XICS_IRQ_PER_ICS; j++)
+ xive_pre_save_mask_irq(xive, sb, j);
+ }
+
+ /* Then scan the queues and update the "in_queue" flag */
+ kvm_for_each_vcpu(i, vcpu, xive->kvm) {
+ struct kvmppc_xive_vcpu *xc = vcpu->arch.xive_vcpu;
+ if (!xc)
+ continue;
+ for (j = 0; j < KVMPPC_XIVE_Q_COUNT; j++) {
+ if (xc->queues[j].qpage)
+ xive_pre_save_queue(xive, &xc->queues[j]);
+ }
+ }
+
+ /* Finally restore interrupt states */
+ for (i = 0; i <= xive->max_sbid; i++) {
+ struct kvmppc_xive_src_block *sb = xive->src_blocks[i];
+ if (!sb)
+ continue;
+ for (j = 0; j < KVMPPC_XICS_IRQ_PER_ICS; j++)
+ xive_pre_save_unmask_irq(xive, sb, j);
+ }
+}
+
+static void xive_post_save_scan(struct kvmppc_xive *xive)
+{
+ u32 i, j;
+
+ /* Clear all the in_queue flags */
+ for (i = 0; i <= xive->max_sbid; i++) {
+ struct kvmppc_xive_src_block *sb = xive->src_blocks[i];
+ if (!sb)
+ continue;
+ for (j = 0; j < KVMPPC_XICS_IRQ_PER_ICS; j++)
+ sb->irq_state[j].in_queue = false;
+ }
+
+ /* Next get_source() will do a new scan */
+ xive->saved_src_count = 0;
+}
+
+/*
+ * This returns the source configuration and state to user space.
+ */
+static int xive_get_source(struct kvmppc_xive *xive, long irq, u64 addr)
+{
+ struct kvmppc_xive_src_block *sb;
+ struct kvmppc_xive_irq_state *state;
+ u64 __user *ubufp = (u64 __user *) addr;
+ u64 val, prio;
+ u16 idx;
+
+ sb = kvmppc_xive_find_source(xive, irq, &idx);
+ if (!sb)
+ return -ENOENT;
+
+ state = &sb->irq_state[idx];
+
+ if (!state->valid)
+ return -ENOENT;
+
+ pr_devel("get_source(%ld)...\n", irq);
+
+ /*
+ * So to properly save the state into something that looks like a
+ * XICS migration stream we cannot treat interrupts individually.
+ *
+ * We need, instead, mask them all (& save their previous PQ state)
+ * to get a stable state in the HW, then sync them to ensure that
+ * any interrupt that had already fired hits its queue, and finally
+ * scan all the queues to collect which interrupts are still present
+ * in the queues, so we can set the "pending" flag on them and
+ * they can be resent on restore.
+ *
+ * So we do it all when the "first" interrupt gets saved, all the
+ * state is collected at that point, the rest of xive_get_source()
+ * will merely collect and convert that state to the expected
+ * userspace bit mask.
+ */
+ if (xive->saved_src_count == 0)
+ xive_pre_save_scan(xive);
+ xive->saved_src_count++;
+
+ /* Convert saved state into something compatible with xics */
+ val = state->act_server;
+ prio = state->saved_scan_prio;
+
+ if (prio == MASKED) {
+ val |= KVM_XICS_MASKED;
+ prio = state->saved_priority;
+ }
+ val |= prio << KVM_XICS_PRIORITY_SHIFT;
+ if (state->lsi) {
+ val |= KVM_XICS_LEVEL_SENSITIVE;
+ if (state->saved_p)
+ val |= KVM_XICS_PENDING;
+ } else {
+ if (state->saved_p)
+ val |= KVM_XICS_PRESENTED;
+
+ if (state->saved_q)
+ val |= KVM_XICS_QUEUED;
+
+ /*
+ * We mark it pending (which will attempt a re-delivery)
+ * if we are in a queue *or* we were masked and had
+ * Q set which is equivalent to the XICS "masked pending"
+ * state
+ */
+ if (state->in_queue || (prio == MASKED && state->saved_q))
+ val |= KVM_XICS_PENDING;
+ }
+
+ /*
+ * If that was the last interrupt saved, reset the
+ * in_queue flags
+ */
+ if (xive->saved_src_count == xive->src_count)
+ xive_post_save_scan(xive);
+
+ /* Copy the result to userspace */
+ if (put_user(val, ubufp))
+ return -EFAULT;
+
+ return 0;
+}
+
+struct kvmppc_xive_src_block *kvmppc_xive_create_src_block(
+ struct kvmppc_xive *xive, int irq)
+{
+ struct kvmppc_xive_src_block *sb;
+ int i, bid;
+
+ bid = irq >> KVMPPC_XICS_ICS_SHIFT;
+
+ mutex_lock(&xive->lock);
+
+ /* block already exists - somebody else got here first */
+ if (xive->src_blocks[bid])
+ goto out;
+
+ /* Create the ICS */
+ sb = kzalloc(sizeof(*sb), GFP_KERNEL);
+ if (!sb)
+ goto out;
+
+ sb->id = bid;
+
+ for (i = 0; i < KVMPPC_XICS_IRQ_PER_ICS; i++) {
+ sb->irq_state[i].number = (bid << KVMPPC_XICS_ICS_SHIFT) | i;
+ sb->irq_state[i].eisn = 0;
+ sb->irq_state[i].guest_priority = MASKED;
+ sb->irq_state[i].saved_priority = MASKED;
+ sb->irq_state[i].act_priority = MASKED;
+ }
+ smp_wmb();
+ xive->src_blocks[bid] = sb;
+
+ if (bid > xive->max_sbid)
+ xive->max_sbid = bid;
+
+out:
+ mutex_unlock(&xive->lock);
+ return xive->src_blocks[bid];
+}
+
+static bool xive_check_delayed_irq(struct kvmppc_xive *xive, u32 irq)
+{
+ struct kvm *kvm = xive->kvm;
+ struct kvm_vcpu *vcpu = NULL;
+ unsigned long i;
+
+ kvm_for_each_vcpu(i, vcpu, kvm) {
+ struct kvmppc_xive_vcpu *xc = vcpu->arch.xive_vcpu;
+
+ if (!xc)
+ continue;
+
+ if (xc->delayed_irq == irq) {
+ xc->delayed_irq = 0;
+ xive->delayed_irqs--;
+ return true;
+ }
+ }
+ return false;
+}
+
+static int xive_set_source(struct kvmppc_xive *xive, long irq, u64 addr)
+{
+ struct kvmppc_xive_src_block *sb;
+ struct kvmppc_xive_irq_state *state;
+ u64 __user *ubufp = (u64 __user *) addr;
+ u16 idx;
+ u64 val;
+ u8 act_prio, guest_prio;
+ u32 server;
+ int rc = 0;
+
+ if (irq < KVMPPC_XICS_FIRST_IRQ || irq >= KVMPPC_XICS_NR_IRQS)
+ return -ENOENT;
+
+ pr_devel("set_source(irq=0x%lx)\n", irq);
+
+ /* Find the source */
+ sb = kvmppc_xive_find_source(xive, irq, &idx);
+ if (!sb) {
+ pr_devel("No source, creating source block...\n");
+ sb = kvmppc_xive_create_src_block(xive, irq);
+ if (!sb) {
+ pr_devel("Failed to create block...\n");
+ return -ENOMEM;
+ }
+ }
+ state = &sb->irq_state[idx];
+
+ /* Read user passed data */
+ if (get_user(val, ubufp)) {
+ pr_devel("fault getting user info !\n");
+ return -EFAULT;
+ }
+
+ server = val & KVM_XICS_DESTINATION_MASK;
+ guest_prio = val >> KVM_XICS_PRIORITY_SHIFT;
+
+ pr_devel(" val=0x016%llx (server=0x%x, guest_prio=%d)\n",
+ val, server, guest_prio);
+
+ /*
+ * If the source doesn't already have an IPI, allocate
+ * one and get the corresponding data
+ */
+ if (!state->ipi_number) {
+ state->ipi_number = xive_native_alloc_irq();
+ if (state->ipi_number == 0) {
+ pr_devel("Failed to allocate IPI !\n");
+ return -ENOMEM;
+ }
+ xive_native_populate_irq_data(state->ipi_number, &state->ipi_data);
+ pr_devel(" src_ipi=0x%x\n", state->ipi_number);
+ }
+
+ /*
+ * We use lock_and_mask() to set us in the right masked
+ * state. We will override that state from the saved state
+ * further down, but this will handle the cases of interrupts
+ * that need FW masking. We set the initial guest_priority to
+ * 0 before calling it to ensure it actually performs the masking.
+ */
+ state->guest_priority = 0;
+ xive_lock_and_mask(xive, sb, state);
+
+ /*
+ * Now, we select a target if we have one. If we don't we
+ * leave the interrupt untargetted. It means that an interrupt
+ * can become "untargetted" accross migration if it was masked
+ * by set_xive() but there is little we can do about it.
+ */
+
+ /* First convert prio and mark interrupt as untargetted */
+ act_prio = xive_prio_from_guest(guest_prio);
+ state->act_priority = MASKED;
+
+ /*
+ * We need to drop the lock due to the mutex below. Hopefully
+ * nothing is touching that interrupt yet since it hasn't been
+ * advertized to a running guest yet
+ */
+ arch_spin_unlock(&sb->lock);
+
+ /* If we have a priority target the interrupt */
+ if (act_prio != MASKED) {
+ /* First, check provisioning of queues */
+ mutex_lock(&xive->lock);
+ rc = xive_check_provisioning(xive->kvm, act_prio);
+ mutex_unlock(&xive->lock);
+
+ /* Target interrupt */
+ if (rc == 0)
+ rc = xive_target_interrupt(xive->kvm, state,
+ server, act_prio);
+ /*
+ * If provisioning or targetting failed, leave it
+ * alone and masked. It will remain disabled until
+ * the guest re-targets it.
+ */
+ }
+
+ /*
+ * Find out if this was a delayed irq stashed in an ICP,
+ * in which case, treat it as pending
+ */
+ if (xive->delayed_irqs && xive_check_delayed_irq(xive, irq)) {
+ val |= KVM_XICS_PENDING;
+ pr_devel(" Found delayed ! forcing PENDING !\n");
+ }
+
+ /* Cleanup the SW state */
+ state->old_p = false;
+ state->old_q = false;
+ state->lsi = false;
+ state->asserted = false;
+
+ /* Restore LSI state */
+ if (val & KVM_XICS_LEVEL_SENSITIVE) {
+ state->lsi = true;
+ if (val & KVM_XICS_PENDING)
+ state->asserted = true;
+ pr_devel(" LSI ! Asserted=%d\n", state->asserted);
+ }
+
+ /*
+ * Restore P and Q. If the interrupt was pending, we
+ * force Q and !P, which will trigger a resend.
+ *
+ * That means that a guest that had both an interrupt
+ * pending (queued) and Q set will restore with only
+ * one instance of that interrupt instead of 2, but that
+ * is perfectly fine as coalescing interrupts that haven't
+ * been presented yet is always allowed.
+ */
+ if (val & KVM_XICS_PRESENTED && !(val & KVM_XICS_PENDING))
+ state->old_p = true;
+ if (val & KVM_XICS_QUEUED || val & KVM_XICS_PENDING)
+ state->old_q = true;
+
+ pr_devel(" P=%d, Q=%d\n", state->old_p, state->old_q);
+
+ /*
+ * If the interrupt was unmasked, update guest priority and
+ * perform the appropriate state transition and do a
+ * re-trigger if necessary.
+ */
+ if (val & KVM_XICS_MASKED) {
+ pr_devel(" masked, saving prio\n");
+ state->guest_priority = MASKED;
+ state->saved_priority = guest_prio;
+ } else {
+ pr_devel(" unmasked, restoring to prio %d\n", guest_prio);
+ xive_finish_unmask(xive, sb, state, guest_prio);
+ state->saved_priority = guest_prio;
+ }
+
+ /* Increment the number of valid sources and mark this one valid */
+ if (!state->valid)
+ xive->src_count++;
+ state->valid = true;
+
+ return 0;
+}
+
+int kvmppc_xive_set_irq(struct kvm *kvm, int irq_source_id, u32 irq, int level,
+ bool line_status)
+{
+ struct kvmppc_xive *xive = kvm->arch.xive;
+ struct kvmppc_xive_src_block *sb;
+ struct kvmppc_xive_irq_state *state;
+ u16 idx;
+
+ if (!xive)
+ return -ENODEV;
+
+ sb = kvmppc_xive_find_source(xive, irq, &idx);
+ if (!sb)
+ return -EINVAL;
+
+ /* Perform locklessly .... (we need to do some RCUisms here...) */
+ state = &sb->irq_state[idx];
+ if (!state->valid)
+ return -EINVAL;
+
+ /* We don't allow a trigger on a passed-through interrupt */
+ if (state->pt_number)
+ return -EINVAL;
+
+ if ((level == 1 && state->lsi) || level == KVM_INTERRUPT_SET_LEVEL)
+ state->asserted = true;
+ else if (level == 0 || level == KVM_INTERRUPT_UNSET) {
+ state->asserted = false;
+ return 0;
+ }
+
+ /* Trigger the IPI */
+ xive_irq_trigger(&state->ipi_data);
+
+ return 0;
+}
+
+int kvmppc_xive_set_nr_servers(struct kvmppc_xive *xive, u64 addr)
+{
+ u32 __user *ubufp = (u32 __user *) addr;
+ u32 nr_servers;
+ int rc = 0;
+
+ if (get_user(nr_servers, ubufp))
+ return -EFAULT;
+
+ pr_devel("%s nr_servers=%u\n", __func__, nr_servers);
+
+ if (!nr_servers || nr_servers > KVM_MAX_VCPU_IDS)
+ return -EINVAL;
+
+ mutex_lock(&xive->lock);
+ if (xive->vp_base != XIVE_INVALID_VP)
+ /* The VP block is allocated once and freed when the device
+ * is released. Better not allow to change its size since its
+ * used by connect_vcpu to validate vCPU ids are valid (eg,
+ * setting it back to a higher value could allow connect_vcpu
+ * to come up with a VP id that goes beyond the VP block, which
+ * is likely to cause a crash in OPAL).
+ */
+ rc = -EBUSY;
+ else if (nr_servers > KVM_MAX_VCPUS)
+ /* We don't need more servers. Higher vCPU ids get packed
+ * down below KVM_MAX_VCPUS by kvmppc_pack_vcpu_id().
+ */
+ xive->nr_servers = KVM_MAX_VCPUS;
+ else
+ xive->nr_servers = nr_servers;
+
+ mutex_unlock(&xive->lock);
+
+ return rc;
+}
+
+static int xive_set_attr(struct kvm_device *dev, struct kvm_device_attr *attr)
+{
+ struct kvmppc_xive *xive = dev->private;
+
+ /* We honor the existing XICS ioctl */
+ switch (attr->group) {
+ case KVM_DEV_XICS_GRP_SOURCES:
+ return xive_set_source(xive, attr->attr, attr->addr);
+ case KVM_DEV_XICS_GRP_CTRL:
+ switch (attr->attr) {
+ case KVM_DEV_XICS_NR_SERVERS:
+ return kvmppc_xive_set_nr_servers(xive, attr->addr);
+ }
+ }
+ return -ENXIO;
+}
+
+static int xive_get_attr(struct kvm_device *dev, struct kvm_device_attr *attr)
+{
+ struct kvmppc_xive *xive = dev->private;
+
+ /* We honor the existing XICS ioctl */
+ switch (attr->group) {
+ case KVM_DEV_XICS_GRP_SOURCES:
+ return xive_get_source(xive, attr->attr, attr->addr);
+ }
+ return -ENXIO;
+}
+
+static int xive_has_attr(struct kvm_device *dev, struct kvm_device_attr *attr)
+{
+ /* We honor the same limits as XICS, at least for now */
+ switch (attr->group) {
+ case KVM_DEV_XICS_GRP_SOURCES:
+ if (attr->attr >= KVMPPC_XICS_FIRST_IRQ &&
+ attr->attr < KVMPPC_XICS_NR_IRQS)
+ return 0;
+ break;
+ case KVM_DEV_XICS_GRP_CTRL:
+ switch (attr->attr) {
+ case KVM_DEV_XICS_NR_SERVERS:
+ return 0;
+ }
+ }
+ return -ENXIO;
+}
+
+static void kvmppc_xive_cleanup_irq(u32 hw_num, struct xive_irq_data *xd)
+{
+ xive_vm_esb_load(xd, XIVE_ESB_SET_PQ_01);
+ xive_native_configure_irq(hw_num, 0, MASKED, 0);
+}
+
+void kvmppc_xive_free_sources(struct kvmppc_xive_src_block *sb)
+{
+ int i;
+
+ for (i = 0; i < KVMPPC_XICS_IRQ_PER_ICS; i++) {
+ struct kvmppc_xive_irq_state *state = &sb->irq_state[i];
+
+ if (!state->valid)
+ continue;
+
+ kvmppc_xive_cleanup_irq(state->ipi_number, &state->ipi_data);
+ xive_cleanup_irq_data(&state->ipi_data);
+ xive_native_free_irq(state->ipi_number);
+
+ /* Pass-through, cleanup too but keep IRQ hw data */
+ if (state->pt_number)
+ kvmppc_xive_cleanup_irq(state->pt_number, state->pt_data);
+
+ state->valid = false;
+ }
+}
+
+/*
+ * Called when device fd is closed. kvm->lock is held.
+ */
+static void kvmppc_xive_release(struct kvm_device *dev)
+{
+ struct kvmppc_xive *xive = dev->private;
+ struct kvm *kvm = xive->kvm;
+ struct kvm_vcpu *vcpu;
+ unsigned long i;
+
+ pr_devel("Releasing xive device\n");
+
+ /*
+ * Since this is the device release function, we know that
+ * userspace does not have any open fd referring to the
+ * device. Therefore there can not be any of the device
+ * attribute set/get functions being executed concurrently,
+ * and similarly, the connect_vcpu and set/clr_mapped
+ * functions also cannot be being executed.
+ */
+
+ debugfs_remove(xive->dentry);
+
+ /*
+ * We should clean up the vCPU interrupt presenters first.
+ */
+ kvm_for_each_vcpu(i, vcpu, kvm) {
+ /*
+ * Take vcpu->mutex to ensure that no one_reg get/set ioctl
+ * (i.e. kvmppc_xive_[gs]et_icp) can be done concurrently.
+ * Holding the vcpu->mutex also means that the vcpu cannot
+ * be executing the KVM_RUN ioctl, and therefore it cannot
+ * be executing the XIVE push or pull code or accessing
+ * the XIVE MMIO regions.
+ */
+ mutex_lock(&vcpu->mutex);
+ kvmppc_xive_cleanup_vcpu(vcpu);
+ mutex_unlock(&vcpu->mutex);
+ }
+
+ /*
+ * Now that we have cleared vcpu->arch.xive_vcpu, vcpu->arch.irq_type
+ * and vcpu->arch.xive_esc_[vr]addr on each vcpu, we are safe
+ * against xive code getting called during vcpu execution or
+ * set/get one_reg operations.
+ */
+ kvm->arch.xive = NULL;
+
+ /* Mask and free interrupts */
+ for (i = 0; i <= xive->max_sbid; i++) {
+ if (xive->src_blocks[i])
+ kvmppc_xive_free_sources(xive->src_blocks[i]);
+ kfree(xive->src_blocks[i]);
+ xive->src_blocks[i] = NULL;
+ }
+
+ if (xive->vp_base != XIVE_INVALID_VP)
+ xive_native_free_vp_block(xive->vp_base);
+
+ /*
+ * A reference of the kvmppc_xive pointer is now kept under
+ * the xive_devices struct of the machine for reuse. It is
+ * freed when the VM is destroyed for now until we fix all the
+ * execution paths.
+ */
+
+ kfree(dev);
+}
+
+/*
+ * When the guest chooses the interrupt mode (XICS legacy or XIVE
+ * native), the VM will switch of KVM device. The previous device will
+ * be "released" before the new one is created.
+ *
+ * Until we are sure all execution paths are well protected, provide a
+ * fail safe (transitional) method for device destruction, in which
+ * the XIVE device pointer is recycled and not directly freed.
+ */
+struct kvmppc_xive *kvmppc_xive_get_device(struct kvm *kvm, u32 type)
+{
+ struct kvmppc_xive **kvm_xive_device = type == KVM_DEV_TYPE_XIVE ?
+ &kvm->arch.xive_devices.native :
+ &kvm->arch.xive_devices.xics_on_xive;
+ struct kvmppc_xive *xive = *kvm_xive_device;
+
+ if (!xive) {
+ xive = kzalloc(sizeof(*xive), GFP_KERNEL);
+ *kvm_xive_device = xive;
+ } else {
+ memset(xive, 0, sizeof(*xive));
+ }
+
+ return xive;
+}
+
+/*
+ * Create a XICS device with XIVE backend. kvm->lock is held.
+ */
+static int kvmppc_xive_create(struct kvm_device *dev, u32 type)
+{
+ struct kvmppc_xive *xive;
+ struct kvm *kvm = dev->kvm;
+
+ pr_devel("Creating xive for partition\n");
+
+ /* Already there ? */
+ if (kvm->arch.xive)
+ return -EEXIST;
+
+ xive = kvmppc_xive_get_device(kvm, type);
+ if (!xive)
+ return -ENOMEM;
+
+ dev->private = xive;
+ xive->dev = dev;
+ xive->kvm = kvm;
+ mutex_init(&xive->lock);
+
+ /* We use the default queue size set by the host */
+ xive->q_order = xive_native_default_eq_shift();
+ if (xive->q_order < PAGE_SHIFT)
+ xive->q_page_order = 0;
+ else
+ xive->q_page_order = xive->q_order - PAGE_SHIFT;
+
+ /* VP allocation is delayed to the first call to connect_vcpu */
+ xive->vp_base = XIVE_INVALID_VP;
+ /* KVM_MAX_VCPUS limits the number of VMs to roughly 64 per sockets
+ * on a POWER9 system.
+ */
+ xive->nr_servers = KVM_MAX_VCPUS;
+
+ if (xive_native_has_single_escalation())
+ xive->flags |= KVMPPC_XIVE_FLAG_SINGLE_ESCALATION;
+
+ if (xive_native_has_save_restore())
+ xive->flags |= KVMPPC_XIVE_FLAG_SAVE_RESTORE;
+
+ kvm->arch.xive = xive;
+ return 0;
+}
+
+int kvmppc_xive_xics_hcall(struct kvm_vcpu *vcpu, u32 req)
+{
+ struct kvmppc_vcore *vc = vcpu->arch.vcore;
+
+ /* The VM should have configured XICS mode before doing XICS hcalls. */
+ if (!kvmppc_xics_enabled(vcpu))
+ return H_TOO_HARD;
+
+ switch (req) {
+ case H_XIRR:
+ return xive_vm_h_xirr(vcpu);
+ case H_CPPR:
+ return xive_vm_h_cppr(vcpu, kvmppc_get_gpr(vcpu, 4));
+ case H_EOI:
+ return xive_vm_h_eoi(vcpu, kvmppc_get_gpr(vcpu, 4));
+ case H_IPI:
+ return xive_vm_h_ipi(vcpu, kvmppc_get_gpr(vcpu, 4),
+ kvmppc_get_gpr(vcpu, 5));
+ case H_IPOLL:
+ return xive_vm_h_ipoll(vcpu, kvmppc_get_gpr(vcpu, 4));
+ case H_XIRR_X:
+ xive_vm_h_xirr(vcpu);
+ kvmppc_set_gpr(vcpu, 5, get_tb() + vc->tb_offset);
+ return H_SUCCESS;
+ }
+
+ return H_UNSUPPORTED;
+}
+EXPORT_SYMBOL_GPL(kvmppc_xive_xics_hcall);
+
+int kvmppc_xive_debug_show_queues(struct seq_file *m, struct kvm_vcpu *vcpu)
+{
+ struct kvmppc_xive_vcpu *xc = vcpu->arch.xive_vcpu;
+ unsigned int i;
+
+ for (i = 0; i < KVMPPC_XIVE_Q_COUNT; i++) {
+ struct xive_q *q = &xc->queues[i];
+ u32 i0, i1, idx;
+
+ if (!q->qpage && !xc->esc_virq[i])
+ continue;
+
+ if (q->qpage) {
+ seq_printf(m, " q[%d]: ", i);
+ idx = q->idx;
+ i0 = be32_to_cpup(q->qpage + idx);
+ idx = (idx + 1) & q->msk;
+ i1 = be32_to_cpup(q->qpage + idx);
+ seq_printf(m, "T=%d %08x %08x...\n", q->toggle,
+ i0, i1);
+ }
+ if (xc->esc_virq[i]) {
+ struct irq_data *d = irq_get_irq_data(xc->esc_virq[i]);
+ struct xive_irq_data *xd =
+ irq_data_get_irq_handler_data(d);
+ u64 pq = xive_vm_esb_load(xd, XIVE_ESB_GET);
+
+ seq_printf(m, " ESC %d %c%c EOI @%llx",
+ xc->esc_virq[i],
+ (pq & XIVE_ESB_VAL_P) ? 'P' : '-',
+ (pq & XIVE_ESB_VAL_Q) ? 'Q' : '-',
+ xd->eoi_page);
+ seq_puts(m, "\n");
+ }
+ }
+ return 0;
+}
+
+void kvmppc_xive_debug_show_sources(struct seq_file *m,
+ struct kvmppc_xive_src_block *sb)
+{
+ int i;
+
+ seq_puts(m, " LISN HW/CHIP TYPE PQ EISN CPU/PRIO\n");
+ for (i = 0; i < KVMPPC_XICS_IRQ_PER_ICS; i++) {
+ struct kvmppc_xive_irq_state *state = &sb->irq_state[i];
+ struct xive_irq_data *xd;
+ u64 pq;
+ u32 hw_num;
+
+ if (!state->valid)
+ continue;
+
+ kvmppc_xive_select_irq(state, &hw_num, &xd);
+
+ pq = xive_vm_esb_load(xd, XIVE_ESB_GET);
+
+ seq_printf(m, "%08x %08x/%02x", state->number, hw_num,
+ xd->src_chip);
+ if (state->lsi)
+ seq_printf(m, " %cLSI", state->asserted ? '^' : ' ');
+ else
+ seq_puts(m, " MSI");
+
+ seq_printf(m, " %s %c%c %08x % 4d/%d",
+ state->ipi_number == hw_num ? "IPI" : " PT",
+ pq & XIVE_ESB_VAL_P ? 'P' : '-',
+ pq & XIVE_ESB_VAL_Q ? 'Q' : '-',
+ state->eisn, state->act_server,
+ state->act_priority);
+
+ seq_puts(m, "\n");
+ }
+}
+
+static int xive_debug_show(struct seq_file *m, void *private)
+{
+ struct kvmppc_xive *xive = m->private;
+ struct kvm *kvm = xive->kvm;
+ struct kvm_vcpu *vcpu;
+ u64 t_rm_h_xirr = 0;
+ u64 t_rm_h_ipoll = 0;
+ u64 t_rm_h_cppr = 0;
+ u64 t_rm_h_eoi = 0;
+ u64 t_rm_h_ipi = 0;
+ u64 t_vm_h_xirr = 0;
+ u64 t_vm_h_ipoll = 0;
+ u64 t_vm_h_cppr = 0;
+ u64 t_vm_h_eoi = 0;
+ u64 t_vm_h_ipi = 0;
+ unsigned long i;
+
+ if (!kvm)
+ return 0;
+
+ seq_puts(m, "=========\nVCPU state\n=========\n");
+
+ kvm_for_each_vcpu(i, vcpu, kvm) {
+ struct kvmppc_xive_vcpu *xc = vcpu->arch.xive_vcpu;
+
+ if (!xc)
+ continue;
+
+ seq_printf(m, "VCPU %d: VP:%#x/%02x\n"
+ " CPPR:%#x HWCPPR:%#x MFRR:%#x PEND:%#x h_xirr: R=%lld V=%lld\n",
+ xc->server_num, xc->vp_id, xc->vp_chip_id,
+ xc->cppr, xc->hw_cppr,
+ xc->mfrr, xc->pending,
+ xc->stat_rm_h_xirr, xc->stat_vm_h_xirr);
+
+ kvmppc_xive_debug_show_queues(m, vcpu);
+
+ t_rm_h_xirr += xc->stat_rm_h_xirr;
+ t_rm_h_ipoll += xc->stat_rm_h_ipoll;
+ t_rm_h_cppr += xc->stat_rm_h_cppr;
+ t_rm_h_eoi += xc->stat_rm_h_eoi;
+ t_rm_h_ipi += xc->stat_rm_h_ipi;
+ t_vm_h_xirr += xc->stat_vm_h_xirr;
+ t_vm_h_ipoll += xc->stat_vm_h_ipoll;
+ t_vm_h_cppr += xc->stat_vm_h_cppr;
+ t_vm_h_eoi += xc->stat_vm_h_eoi;
+ t_vm_h_ipi += xc->stat_vm_h_ipi;
+ }
+
+ seq_puts(m, "Hcalls totals\n");
+ seq_printf(m, " H_XIRR R=%10lld V=%10lld\n", t_rm_h_xirr, t_vm_h_xirr);
+ seq_printf(m, " H_IPOLL R=%10lld V=%10lld\n", t_rm_h_ipoll, t_vm_h_ipoll);
+ seq_printf(m, " H_CPPR R=%10lld V=%10lld\n", t_rm_h_cppr, t_vm_h_cppr);
+ seq_printf(m, " H_EOI R=%10lld V=%10lld\n", t_rm_h_eoi, t_vm_h_eoi);
+ seq_printf(m, " H_IPI R=%10lld V=%10lld\n", t_rm_h_ipi, t_vm_h_ipi);
+
+ seq_puts(m, "=========\nSources\n=========\n");
+
+ for (i = 0; i <= xive->max_sbid; i++) {
+ struct kvmppc_xive_src_block *sb = xive->src_blocks[i];
+
+ if (sb) {
+ arch_spin_lock(&sb->lock);
+ kvmppc_xive_debug_show_sources(m, sb);
+ arch_spin_unlock(&sb->lock);
+ }
+ }
+
+ return 0;
+}
+
+DEFINE_SHOW_ATTRIBUTE(xive_debug);
+
+static void xive_debugfs_init(struct kvmppc_xive *xive)
+{
+ xive->dentry = debugfs_create_file("xive", S_IRUGO, xive->kvm->debugfs_dentry,
+ xive, &xive_debug_fops);
+
+ pr_debug("%s: created\n", __func__);
+}
+
+static void kvmppc_xive_init(struct kvm_device *dev)
+{
+ struct kvmppc_xive *xive = dev->private;
+
+ /* Register some debug interfaces */
+ xive_debugfs_init(xive);
+}
+
+struct kvm_device_ops kvm_xive_ops = {
+ .name = "kvm-xive",
+ .create = kvmppc_xive_create,
+ .init = kvmppc_xive_init,
+ .release = kvmppc_xive_release,
+ .set_attr = xive_set_attr,
+ .get_attr = xive_get_attr,
+ .has_attr = xive_has_attr,
+};