diff options
Diffstat (limited to '')
-rw-r--r-- | arch/powerpc/platforms/85xx/mpc85xx_mds.c | 398 |
1 files changed, 398 insertions, 0 deletions
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_mds.c b/arch/powerpc/platforms/85xx/mpc85xx_mds.c new file mode 100644 index 000000000..3a2ac410a --- /dev/null +++ b/arch/powerpc/platforms/85xx/mpc85xx_mds.c @@ -0,0 +1,398 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright (C) 2006-2010, 2012-2013 Freescale Semiconductor, Inc. + * All rights reserved. + * + * Author: Andy Fleming <afleming@freescale.com> + * + * Based on 83xx/mpc8360e_pb.c by: + * Li Yang <LeoLi@freescale.com> + * Yin Olivia <Hong-hua.Yin@freescale.com> + * + * Description: + * MPC85xx MDS board specific routines. + */ + +#include <linux/stddef.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/errno.h> +#include <linux/reboot.h> +#include <linux/pci.h> +#include <linux/kdev_t.h> +#include <linux/major.h> +#include <linux/console.h> +#include <linux/delay.h> +#include <linux/seq_file.h> +#include <linux/initrd.h> +#include <linux/fsl_devices.h> +#include <linux/of_platform.h> +#include <linux/of_device.h> +#include <linux/phy.h> +#include <linux/memblock.h> +#include <linux/fsl/guts.h> + +#include <linux/atomic.h> +#include <asm/time.h> +#include <asm/io.h> +#include <asm/machdep.h> +#include <asm/pci-bridge.h> +#include <asm/irq.h> +#include <mm/mmu_decl.h> +#include <asm/udbg.h> +#include <sysdev/fsl_soc.h> +#include <sysdev/fsl_pci.h> +#include <soc/fsl/qe/qe.h> +#include <asm/mpic.h> +#include <asm/swiotlb.h> +#include "smp.h" + +#include "mpc85xx.h" + +#undef DEBUG +#ifdef DEBUG +#define DBG(fmt...) udbg_printf(fmt) +#else +#define DBG(fmt...) +#endif + +#if IS_BUILTIN(CONFIG_PHYLIB) + +#define MV88E1111_SCR 0x10 +#define MV88E1111_SCR_125CLK 0x0010 +static int mpc8568_fixup_125_clock(struct phy_device *phydev) +{ + int scr; + int err; + + /* Workaround for the 125 CLK Toggle */ + scr = phy_read(phydev, MV88E1111_SCR); + + if (scr < 0) + return scr; + + err = phy_write(phydev, MV88E1111_SCR, scr & ~(MV88E1111_SCR_125CLK)); + + if (err) + return err; + + err = phy_write(phydev, MII_BMCR, BMCR_RESET); + + if (err) + return err; + + scr = phy_read(phydev, MV88E1111_SCR); + + if (scr < 0) + return scr; + + err = phy_write(phydev, MV88E1111_SCR, scr | 0x0008); + + return err; +} + +static int mpc8568_mds_phy_fixups(struct phy_device *phydev) +{ + int temp; + int err; + + /* Errata */ + err = phy_write(phydev,29, 0x0006); + + if (err) + return err; + + temp = phy_read(phydev, 30); + + if (temp < 0) + return temp; + + temp = (temp & (~0x8000)) | 0x4000; + err = phy_write(phydev,30, temp); + + if (err) + return err; + + err = phy_write(phydev,29, 0x000a); + + if (err) + return err; + + temp = phy_read(phydev, 30); + + if (temp < 0) + return temp; + + temp = phy_read(phydev, 30); + + if (temp < 0) + return temp; + + temp &= ~0x0020; + + err = phy_write(phydev,30,temp); + + if (err) + return err; + + /* Disable automatic MDI/MDIX selection */ + temp = phy_read(phydev, 16); + + if (temp < 0) + return temp; + + temp &= ~0x0060; + err = phy_write(phydev,16,temp); + + return err; +} + +#endif + +/* ************************************************************************ + * + * Setup the architecture + * + */ +#ifdef CONFIG_QUICC_ENGINE +static void __init mpc85xx_mds_reset_ucc_phys(void) +{ + struct device_node *np; + static u8 __iomem *bcsr_regs; + + /* Map BCSR area */ + np = of_find_node_by_name(NULL, "bcsr"); + if (!np) + return; + + bcsr_regs = of_iomap(np, 0); + of_node_put(np); + if (!bcsr_regs) + return; + + if (machine_is(mpc8568_mds)) { +#define BCSR_UCC1_GETH_EN (0x1 << 7) +#define BCSR_UCC2_GETH_EN (0x1 << 7) +#define BCSR_UCC1_MODE_MSK (0x3 << 4) +#define BCSR_UCC2_MODE_MSK (0x3 << 0) + + /* Turn off UCC1 & UCC2 */ + clrbits8(&bcsr_regs[8], BCSR_UCC1_GETH_EN); + clrbits8(&bcsr_regs[9], BCSR_UCC2_GETH_EN); + + /* Mode is RGMII, all bits clear */ + clrbits8(&bcsr_regs[11], BCSR_UCC1_MODE_MSK | + BCSR_UCC2_MODE_MSK); + + /* Turn UCC1 & UCC2 on */ + setbits8(&bcsr_regs[8], BCSR_UCC1_GETH_EN); + setbits8(&bcsr_regs[9], BCSR_UCC2_GETH_EN); + } else if (machine_is(mpc8569_mds)) { +#define BCSR7_UCC12_GETHnRST (0x1 << 2) +#define BCSR8_UEM_MARVELL_RST (0x1 << 1) +#define BCSR_UCC_RGMII (0x1 << 6) +#define BCSR_UCC_RTBI (0x1 << 5) + /* + * U-Boot mangles interrupt polarity for Marvell PHYs, + * so reset built-in and UEM Marvell PHYs, this puts + * the PHYs into their normal state. + */ + clrbits8(&bcsr_regs[7], BCSR7_UCC12_GETHnRST); + setbits8(&bcsr_regs[8], BCSR8_UEM_MARVELL_RST); + + setbits8(&bcsr_regs[7], BCSR7_UCC12_GETHnRST); + clrbits8(&bcsr_regs[8], BCSR8_UEM_MARVELL_RST); + + for_each_compatible_node(np, "network", "ucc_geth") { + const unsigned int *prop; + int ucc_num; + + prop = of_get_property(np, "cell-index", NULL); + if (prop == NULL) + continue; + + ucc_num = *prop - 1; + + prop = of_get_property(np, "phy-connection-type", NULL); + if (prop == NULL) + continue; + + if (strcmp("rtbi", (const char *)prop) == 0) + clrsetbits_8(&bcsr_regs[7 + ucc_num], + BCSR_UCC_RGMII, BCSR_UCC_RTBI); + } + } else if (machine_is(p1021_mds)) { +#define BCSR11_ENET_MICRST (0x1 << 5) + /* Reset Micrel PHY */ + clrbits8(&bcsr_regs[11], BCSR11_ENET_MICRST); + setbits8(&bcsr_regs[11], BCSR11_ENET_MICRST); + } + + iounmap(bcsr_regs); +} + +static void __init mpc85xx_mds_qe_init(void) +{ + struct device_node *np; + + mpc85xx_qe_par_io_init(); + mpc85xx_mds_reset_ucc_phys(); + + if (machine_is(p1021_mds)) { + + struct ccsr_guts __iomem *guts; + + np = of_find_node_by_name(NULL, "global-utilities"); + if (np) { + guts = of_iomap(np, 0); + if (!guts) + pr_err("mpc85xx-rdb: could not map global utilities register\n"); + else{ + /* P1021 has pins muxed for QE and other functions. To + * enable QE UEC mode, we need to set bit QE0 for UCC1 + * in Eth mode, QE0 and QE3 for UCC5 in Eth mode, QE9 + * and QE12 for QE MII management signals in PMUXCR + * register. + */ + setbits32(&guts->pmuxcr, MPC85xx_PMUXCR_QE(0) | + MPC85xx_PMUXCR_QE(3) | + MPC85xx_PMUXCR_QE(9) | + MPC85xx_PMUXCR_QE(12)); + iounmap(guts); + } + of_node_put(np); + } + + } +} + +#else +static void __init mpc85xx_mds_qe_init(void) { } +#endif /* CONFIG_QUICC_ENGINE */ + +static void __init mpc85xx_mds_setup_arch(void) +{ + if (ppc_md.progress) + ppc_md.progress("mpc85xx_mds_setup_arch()", 0); + + mpc85xx_smp_init(); + + mpc85xx_mds_qe_init(); + + fsl_pci_assign_primary(); + + swiotlb_detect_4g(); +} + +#if IS_BUILTIN(CONFIG_PHYLIB) + +static int __init board_fixups(void) +{ + char phy_id[20]; + char *compstrs[2] = {"fsl,gianfar-mdio", "fsl,ucc-mdio"}; + struct device_node *mdio; + struct resource res; + int i; + + for (i = 0; i < ARRAY_SIZE(compstrs); i++) { + mdio = of_find_compatible_node(NULL, NULL, compstrs[i]); + + of_address_to_resource(mdio, 0, &res); + snprintf(phy_id, sizeof(phy_id), "%llx:%02x", + (unsigned long long)res.start, 1); + + phy_register_fixup_for_id(phy_id, mpc8568_fixup_125_clock); + phy_register_fixup_for_id(phy_id, mpc8568_mds_phy_fixups); + + /* Register a workaround for errata */ + snprintf(phy_id, sizeof(phy_id), "%llx:%02x", + (unsigned long long)res.start, 7); + phy_register_fixup_for_id(phy_id, mpc8568_mds_phy_fixups); + + of_node_put(mdio); + } + + return 0; +} + +machine_arch_initcall(mpc8568_mds, board_fixups); +machine_arch_initcall(mpc8569_mds, board_fixups); + +#endif + +static int __init mpc85xx_publish_devices(void) +{ + return mpc85xx_common_publish_devices(); +} + +machine_arch_initcall(mpc8568_mds, mpc85xx_publish_devices); +machine_arch_initcall(mpc8569_mds, mpc85xx_publish_devices); +machine_arch_initcall(p1021_mds, mpc85xx_common_publish_devices); + +static void __init mpc85xx_mds_pic_init(void) +{ + struct mpic *mpic = mpic_alloc(NULL, 0, MPIC_BIG_ENDIAN | + MPIC_SINGLE_DEST_CPU, + 0, 256, " OpenPIC "); + BUG_ON(mpic == NULL); + + mpic_init(mpic); +} + +static int __init mpc85xx_mds_probe(void) +{ + return of_machine_is_compatible("MPC85xxMDS"); +} + +define_machine(mpc8568_mds) { + .name = "MPC8568 MDS", + .probe = mpc85xx_mds_probe, + .setup_arch = mpc85xx_mds_setup_arch, + .init_IRQ = mpc85xx_mds_pic_init, + .get_irq = mpic_get_irq, + .calibrate_decr = generic_calibrate_decr, + .progress = udbg_progress, +#ifdef CONFIG_PCI + .pcibios_fixup_bus = fsl_pcibios_fixup_bus, + .pcibios_fixup_phb = fsl_pcibios_fixup_phb, +#endif +}; + +static int __init mpc8569_mds_probe(void) +{ + return of_machine_is_compatible("fsl,MPC8569EMDS"); +} + +define_machine(mpc8569_mds) { + .name = "MPC8569 MDS", + .probe = mpc8569_mds_probe, + .setup_arch = mpc85xx_mds_setup_arch, + .init_IRQ = mpc85xx_mds_pic_init, + .get_irq = mpic_get_irq, + .calibrate_decr = generic_calibrate_decr, + .progress = udbg_progress, +#ifdef CONFIG_PCI + .pcibios_fixup_bus = fsl_pcibios_fixup_bus, + .pcibios_fixup_phb = fsl_pcibios_fixup_phb, +#endif +}; + +static int __init p1021_mds_probe(void) +{ + return of_machine_is_compatible("fsl,P1021MDS"); + +} + +define_machine(p1021_mds) { + .name = "P1021 MDS", + .probe = p1021_mds_probe, + .setup_arch = mpc85xx_mds_setup_arch, + .init_IRQ = mpc85xx_mds_pic_init, + .get_irq = mpic_get_irq, + .calibrate_decr = generic_calibrate_decr, + .progress = udbg_progress, +#ifdef CONFIG_PCI + .pcibios_fixup_bus = fsl_pcibios_fixup_bus, + .pcibios_fixup_phb = fsl_pcibios_fixup_phb, +#endif +}; |