diff options
Diffstat (limited to '')
-rw-r--r-- | arch/powerpc/platforms/chrp/setup.c | 587 |
1 files changed, 587 insertions, 0 deletions
diff --git a/arch/powerpc/platforms/chrp/setup.c b/arch/powerpc/platforms/chrp/setup.c new file mode 100644 index 000000000..ec63c0558 --- /dev/null +++ b/arch/powerpc/platforms/chrp/setup.c @@ -0,0 +1,587 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 1995 Linus Torvalds + * Adapted from 'alpha' version by Gary Thomas + * Modified by Cort Dougan (cort@cs.nmt.edu) + */ + +/* + * bootup setup stuff.. + */ + +#include <linux/errno.h> +#include <linux/sched.h> +#include <linux/kernel.h> +#include <linux/mm.h> +#include <linux/stddef.h> +#include <linux/unistd.h> +#include <linux/ptrace.h> +#include <linux/user.h> +#include <linux/tty.h> +#include <linux/major.h> +#include <linux/interrupt.h> +#include <linux/reboot.h> +#include <linux/init.h> +#include <linux/pci.h> +#include <generated/utsrelease.h> +#include <linux/adb.h> +#include <linux/module.h> +#include <linux/delay.h> +#include <linux/console.h> +#include <linux/seq_file.h> +#include <linux/root_dev.h> +#include <linux/initrd.h> +#include <linux/timer.h> +#include <linux/of_address.h> +#include <linux/of_fdt.h> +#include <linux/of_irq.h> + +#include <asm/io.h> +#include <asm/pci-bridge.h> +#include <asm/dma.h> +#include <asm/machdep.h> +#include <asm/irq.h> +#include <asm/hydra.h> +#include <asm/sections.h> +#include <asm/time.h> +#include <asm/i8259.h> +#include <asm/mpic.h> +#include <asm/rtas.h> +#include <asm/xmon.h> + +#include "chrp.h" +#include "gg2.h" + +void rtas_indicator_progress(char *, unsigned short); + +int _chrp_type; +EXPORT_SYMBOL(_chrp_type); + +static struct mpic *chrp_mpic; + +/* Used for doing CHRP event-scans */ +DEFINE_PER_CPU(struct timer_list, heartbeat_timer); +unsigned long event_scan_interval; + +extern unsigned long loops_per_jiffy; + +/* To be replaced by RTAS when available */ +static unsigned int __iomem *briq_SPOR; + +#ifdef CONFIG_SMP +extern struct smp_ops_t chrp_smp_ops; +#endif + +static const char *gg2_memtypes[4] = { + "FPM", "SDRAM", "EDO", "BEDO" +}; +static const char *gg2_cachesizes[4] = { + "256 KB", "512 KB", "1 MB", "Reserved" +}; +static const char *gg2_cachetypes[4] = { + "Asynchronous", "Reserved", "Flow-Through Synchronous", + "Pipelined Synchronous" +}; +static const char *gg2_cachemodes[4] = { + "Disabled", "Write-Through", "Copy-Back", "Transparent Mode" +}; + +static const char *chrp_names[] = { + "Unknown", + "","","", + "Motorola", + "IBM or Longtrail", + "Genesi Pegasos", + "Total Impact Briq" +}; + +static void chrp_show_cpuinfo(struct seq_file *m) +{ + int i, sdramen; + unsigned int t; + struct device_node *root; + const char *model = ""; + + root = of_find_node_by_path("/"); + if (root) + model = of_get_property(root, "model", NULL); + seq_printf(m, "machine\t\t: CHRP %s\n", model); + + /* longtrail (goldengate) stuff */ + if (model && !strncmp(model, "IBM,LongTrail", 13)) { + /* VLSI VAS96011/12 `Golden Gate 2' */ + /* Memory banks */ + sdramen = (in_le32(gg2_pci_config_base + GG2_PCI_DRAM_CTRL) + >>31) & 1; + for (i = 0; i < (sdramen ? 4 : 6); i++) { + t = in_le32(gg2_pci_config_base+ + GG2_PCI_DRAM_BANK0+ + i*4); + if (!(t & 1)) + continue; + switch ((t>>8) & 0x1f) { + case 0x1f: + model = "4 MB"; + break; + case 0x1e: + model = "8 MB"; + break; + case 0x1c: + model = "16 MB"; + break; + case 0x18: + model = "32 MB"; + break; + case 0x10: + model = "64 MB"; + break; + case 0x00: + model = "128 MB"; + break; + default: + model = "Reserved"; + break; + } + seq_printf(m, "memory bank %d\t: %s %s\n", i, model, + gg2_memtypes[sdramen ? 1 : ((t>>1) & 3)]); + } + /* L2 cache */ + t = in_le32(gg2_pci_config_base+GG2_PCI_CC_CTRL); + seq_printf(m, "board l2\t: %s %s (%s)\n", + gg2_cachesizes[(t>>7) & 3], + gg2_cachetypes[(t>>2) & 3], + gg2_cachemodes[t & 3]); + } + of_node_put(root); +} + +/* + * Fixes for the National Semiconductor PC78308VUL SuperI/O + * + * Some versions of Open Firmware incorrectly initialize the IRQ settings + * for keyboard and mouse + */ +static inline void __init sio_write(u8 val, u8 index) +{ + outb(index, 0x15c); + outb(val, 0x15d); +} + +static inline u8 __init sio_read(u8 index) +{ + outb(index, 0x15c); + return inb(0x15d); +} + +static void __init sio_fixup_irq(const char *name, u8 device, u8 level, + u8 type) +{ + u8 level0, type0, active; + + /* select logical device */ + sio_write(device, 0x07); + active = sio_read(0x30); + level0 = sio_read(0x70); + type0 = sio_read(0x71); + if (level0 != level || type0 != type || !active) { + printk(KERN_WARNING "sio: %s irq level %d, type %d, %sactive: " + "remapping to level %d, type %d, active\n", + name, level0, type0, !active ? "in" : "", level, type); + sio_write(0x01, 0x30); + sio_write(level, 0x70); + sio_write(type, 0x71); + } +} + +static void __init sio_init(void) +{ + struct device_node *root; + const char *model; + + root = of_find_node_by_path("/"); + if (!root) + return; + + model = of_get_property(root, "model", NULL); + if (model && !strncmp(model, "IBM,LongTrail", 13)) { + /* logical device 0 (KBC/Keyboard) */ + sio_fixup_irq("keyboard", 0, 1, 2); + /* select logical device 1 (KBC/Mouse) */ + sio_fixup_irq("mouse", 1, 12, 2); + } + + of_node_put(root); +} + + +static void __init pegasos_set_l2cr(void) +{ + struct device_node *np; + + /* On Pegasos, enable the l2 cache if needed, as the OF forgets it */ + if (_chrp_type != _CHRP_Pegasos) + return; + + /* Enable L2 cache if needed */ + np = of_find_node_by_type(NULL, "cpu"); + if (np != NULL) { + const unsigned int *l2cr = of_get_property(np, "l2cr", NULL); + if (l2cr == NULL) { + printk ("Pegasos l2cr : no cpu l2cr property found\n"); + goto out; + } + if (!((*l2cr) & 0x80000000)) { + printk ("Pegasos l2cr : L2 cache was not active, " + "activating\n"); + _set_L2CR(0); + _set_L2CR((*l2cr) | 0x80000000); + } + } +out: + of_node_put(np); +} + +static void __noreturn briq_restart(char *cmd) +{ + local_irq_disable(); + if (briq_SPOR) + out_be32(briq_SPOR, 0); + for(;;); +} + +/* + * Per default, input/output-device points to the keyboard/screen + * If no card is installed, the built-in serial port is used as a fallback. + * But unfortunately, the firmware does not connect /chosen/{stdin,stdout} + * to the built-in serial node. Instead, a /failsafe node is created. + */ +static __init void chrp_init(void) +{ + struct device_node *node; + const char *property; + + if (strstr(boot_command_line, "console=")) + return; + /* find the boot console from /chosen/stdout */ + if (!of_chosen) + return; + node = of_find_node_by_path("/"); + if (!node) + return; + property = of_get_property(node, "model", NULL); + if (!property) + goto out_put; + if (strcmp(property, "Pegasos2")) + goto out_put; + /* this is a Pegasos2 */ + property = of_get_property(of_chosen, "linux,stdout-path", NULL); + if (!property) + goto out_put; + of_node_put(node); + node = of_find_node_by_path(property); + if (!node) + return; + if (!of_node_is_type(node, "serial")) + goto out_put; + /* + * The 9pin connector is either /failsafe + * or /pci@80000000/isa@C/serial@i2F8 + * The optional graphics card has also type 'serial' in VGA mode. + */ + if (of_node_name_eq(node, "failsafe") || of_node_name_eq(node, "serial")) + add_preferred_console("ttyS", 0, NULL); +out_put: + of_node_put(node); +} + +static void __init chrp_setup_arch(void) +{ + struct device_node *root = of_find_node_by_path("/"); + const char *machine = NULL; + + /* init to some ~sane value until calibrate_delay() runs */ + loops_per_jiffy = 50000000/HZ; + + if (root) + machine = of_get_property(root, "model", NULL); + if (machine && strncmp(machine, "Pegasos", 7) == 0) { + _chrp_type = _CHRP_Pegasos; + } else if (machine && strncmp(machine, "IBM", 3) == 0) { + _chrp_type = _CHRP_IBM; + } else if (machine && strncmp(machine, "MOT", 3) == 0) { + _chrp_type = _CHRP_Motorola; + } else if (machine && strncmp(machine, "TotalImpact,BRIQ-1", 18) == 0) { + _chrp_type = _CHRP_briq; + /* Map the SPOR register on briq and change the restart hook */ + briq_SPOR = ioremap(0xff0000e8, 4); + ppc_md.restart = briq_restart; + } else { + /* Let's assume it is an IBM chrp if all else fails */ + _chrp_type = _CHRP_IBM; + } + of_node_put(root); + printk("chrp type = %x [%s]\n", _chrp_type, chrp_names[_chrp_type]); + + rtas_initialize(); + if (rtas_token("display-character") >= 0) + ppc_md.progress = rtas_progress; + + /* use RTAS time-of-day routines if available */ + if (rtas_token("get-time-of-day") != RTAS_UNKNOWN_SERVICE) { + ppc_md.get_boot_time = rtas_get_boot_time; + ppc_md.get_rtc_time = rtas_get_rtc_time; + ppc_md.set_rtc_time = rtas_set_rtc_time; + } + + /* On pegasos, enable the L2 cache if not already done by OF */ + pegasos_set_l2cr(); + + /* + * Fix the Super I/O configuration + */ + sio_init(); + + /* + * Print the banner, then scroll down so boot progress + * can be printed. -- Cort + */ + if (ppc_md.progress) ppc_md.progress("Linux/PPC "UTS_RELEASE"\n", 0x0); +} + +static void chrp_8259_cascade(struct irq_desc *desc) +{ + struct irq_chip *chip = irq_desc_get_chip(desc); + unsigned int cascade_irq = i8259_irq(); + + if (cascade_irq) + generic_handle_irq(cascade_irq); + + chip->irq_eoi(&desc->irq_data); +} + +/* + * Finds the open-pic node and sets up the mpic driver. + */ +static void __init chrp_find_openpic(void) +{ + struct device_node *np, *root; + int len, i, j; + int isu_size; + const unsigned int *iranges, *opprop = NULL; + int oplen = 0; + unsigned long opaddr; + int na = 1; + + np = of_find_node_by_type(NULL, "open-pic"); + if (np == NULL) + return; + root = of_find_node_by_path("/"); + if (root) { + opprop = of_get_property(root, "platform-open-pic", &oplen); + na = of_n_addr_cells(root); + } + if (opprop && oplen >= na * sizeof(unsigned int)) { + opaddr = opprop[na-1]; /* assume 32-bit */ + oplen /= na * sizeof(unsigned int); + } else { + struct resource r; + if (of_address_to_resource(np, 0, &r)) { + goto bail; + } + opaddr = r.start; + oplen = 0; + } + + printk(KERN_INFO "OpenPIC at %lx\n", opaddr); + + iranges = of_get_property(np, "interrupt-ranges", &len); + if (iranges == NULL) + len = 0; /* non-distributed mpic */ + else + len /= 2 * sizeof(unsigned int); + + /* + * The first pair of cells in interrupt-ranges refers to the + * IDU; subsequent pairs refer to the ISUs. + */ + if (oplen < len) { + printk(KERN_ERR "Insufficient addresses for distributed" + " OpenPIC (%d < %d)\n", oplen, len); + len = oplen; + } + + isu_size = 0; + if (len > 0 && iranges[1] != 0) { + printk(KERN_INFO "OpenPIC irqs %d..%d in IDU\n", + iranges[0], iranges[0] + iranges[1] - 1); + } + if (len > 1) + isu_size = iranges[3]; + + chrp_mpic = mpic_alloc(np, opaddr, MPIC_NO_RESET, + isu_size, 0, " MPIC "); + if (chrp_mpic == NULL) { + printk(KERN_ERR "Failed to allocate MPIC structure\n"); + goto bail; + } + j = na - 1; + for (i = 1; i < len; ++i) { + iranges += 2; + j += na; + printk(KERN_INFO "OpenPIC irqs %d..%d in ISU at %x\n", + iranges[0], iranges[0] + iranges[1] - 1, + opprop[j]); + mpic_assign_isu(chrp_mpic, i - 1, opprop[j]); + } + + mpic_init(chrp_mpic); + ppc_md.get_irq = mpic_get_irq; + bail: + of_node_put(root); + of_node_put(np); +} + +static void __init chrp_find_8259(void) +{ + struct device_node *np, *pic = NULL; + unsigned long chrp_int_ack = 0; + unsigned int cascade_irq; + + /* Look for cascade */ + for_each_node_by_type(np, "interrupt-controller") + if (of_device_is_compatible(np, "chrp,iic")) { + pic = np; + break; + } + /* Ok, 8259 wasn't found. We need to handle the case where + * we have a pegasos that claims to be chrp but doesn't have + * a proper interrupt tree + */ + if (pic == NULL && chrp_mpic != NULL) { + printk(KERN_ERR "i8259: Not found in device-tree" + " assuming no legacy interrupts\n"); + return; + } + + /* Look for intack. In a perfect world, we would look for it on + * the ISA bus that holds the 8259 but heh... Works that way. If + * we ever see a problem, we can try to re-use the pSeries code here. + * Also, Pegasos-type platforms don't have a proper node to start + * from anyway + */ + for_each_node_by_name(np, "pci") { + const unsigned int *addrp = of_get_property(np, + "8259-interrupt-acknowledge", NULL); + + if (addrp == NULL) + continue; + chrp_int_ack = addrp[of_n_addr_cells(np)-1]; + break; + } + of_node_put(np); + if (np == NULL) + printk(KERN_WARNING "Cannot find PCI interrupt acknowledge" + " address, polling\n"); + + i8259_init(pic, chrp_int_ack); + if (ppc_md.get_irq == NULL) { + ppc_md.get_irq = i8259_irq; + irq_set_default_host(i8259_get_host()); + } + if (chrp_mpic != NULL) { + cascade_irq = irq_of_parse_and_map(pic, 0); + if (!cascade_irq) + printk(KERN_ERR "i8259: failed to map cascade irq\n"); + else + irq_set_chained_handler(cascade_irq, + chrp_8259_cascade); + } +} + +static void __init chrp_init_IRQ(void) +{ +#if defined(CONFIG_VT) && defined(CONFIG_INPUT_ADBHID) && defined(CONFIG_XMON) + struct device_node *kbd; +#endif + chrp_find_openpic(); + chrp_find_8259(); + +#ifdef CONFIG_SMP + /* Pegasos has no MPIC, those ops would make it crash. It might be an + * option to move setting them to after we probe the PIC though + */ + if (chrp_mpic != NULL) + smp_ops = &chrp_smp_ops; +#endif /* CONFIG_SMP */ + + if (_chrp_type == _CHRP_Pegasos) + ppc_md.get_irq = i8259_irq; + +#if defined(CONFIG_VT) && defined(CONFIG_INPUT_ADBHID) && defined(CONFIG_XMON) + /* see if there is a keyboard in the device tree + with a parent of type "adb" */ + for_each_node_by_name(kbd, "keyboard") + if (of_node_is_type(kbd->parent, "adb")) + break; + of_node_put(kbd); + if (kbd) { + if (request_irq(HYDRA_INT_ADB_NMI, xmon_irq, 0, "XMON break", + NULL)) + pr_err("Failed to register XMON break interrupt\n"); + } +#endif +} + +static void __init +chrp_init2(void) +{ +#if IS_ENABLED(CONFIG_NVRAM) + chrp_nvram_init(); +#endif + + request_region(0x20,0x20,"pic1"); + request_region(0xa0,0x20,"pic2"); + request_region(0x00,0x20,"dma1"); + request_region(0x40,0x20,"timer"); + request_region(0x80,0x10,"dma page reg"); + request_region(0xc0,0x20,"dma2"); + + if (ppc_md.progress) + ppc_md.progress(" Have fun! ", 0x7777); +} + +static int __init chrp_probe(void) +{ + const char *dtype = of_get_flat_dt_prop(of_get_flat_dt_root(), + "device_type", NULL); + if (dtype == NULL) + return 0; + if (strcmp(dtype, "chrp")) + return 0; + + DMA_MODE_READ = 0x44; + DMA_MODE_WRITE = 0x48; + + pm_power_off = rtas_power_off; + + chrp_init(); + + return 1; +} + +define_machine(chrp) { + .name = "CHRP", + .probe = chrp_probe, + .setup_arch = chrp_setup_arch, + .discover_phbs = chrp_find_bridges, + .init = chrp_init2, + .show_cpuinfo = chrp_show_cpuinfo, + .init_IRQ = chrp_init_IRQ, + .restart = rtas_restart, + .halt = rtas_halt, + .time_init = chrp_time_init, + .set_rtc_time = chrp_set_rtc_time, + .get_rtc_time = chrp_get_rtc_time, + .calibrate_decr = generic_calibrate_decr, + .phys_mem_access_prot = pci_phys_mem_access_prot, +}; |