diff options
Diffstat (limited to '')
-rw-r--r-- | arch/powerpc/platforms/powermac/feature.c | 3024 |
1 files changed, 3024 insertions, 0 deletions
diff --git a/arch/powerpc/platforms/powermac/feature.c b/arch/powerpc/platforms/powermac/feature.c new file mode 100644 index 000000000..0382d20b5 --- /dev/null +++ b/arch/powerpc/platforms/powermac/feature.c @@ -0,0 +1,3024 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright (C) 1996-2001 Paul Mackerras (paulus@cs.anu.edu.au) + * Ben. Herrenschmidt (benh@kernel.crashing.org) + * + * TODO: + * + * - Replace mdelay with some schedule loop if possible + * - Shorten some obfuscated delays on some routines (like modem + * power) + * - Refcount some clocks (see darwin) + * - Split split split... + */ +#include <linux/types.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/kernel.h> +#include <linux/sched.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/spinlock.h> +#include <linux/adb.h> +#include <linux/pmu.h> +#include <linux/ioport.h> +#include <linux/export.h> +#include <linux/pci.h> +#include <asm/sections.h> +#include <asm/errno.h> +#include <asm/ohare.h> +#include <asm/heathrow.h> +#include <asm/keylargo.h> +#include <asm/uninorth.h> +#include <asm/io.h> +#include <asm/machdep.h> +#include <asm/pmac_feature.h> +#include <asm/dbdma.h> +#include <asm/pci-bridge.h> +#include <asm/pmac_low_i2c.h> + +#undef DEBUG_FEATURE + +#ifdef DEBUG_FEATURE +#define DBG(fmt...) printk(KERN_DEBUG fmt) +#else +#define DBG(fmt...) +#endif + +#ifdef CONFIG_PPC_BOOK3S_32 +extern int powersave_lowspeed; +#endif + +extern int powersave_nap; +extern struct device_node *k2_skiplist[2]; + +/* + * We use a single global lock to protect accesses. Each driver has + * to take care of its own locking + */ +DEFINE_RAW_SPINLOCK(feature_lock); + +#define LOCK(flags) raw_spin_lock_irqsave(&feature_lock, flags); +#define UNLOCK(flags) raw_spin_unlock_irqrestore(&feature_lock, flags); + + +/* + * Instance of some macio stuffs + */ +struct macio_chip macio_chips[MAX_MACIO_CHIPS]; + +struct macio_chip *macio_find(struct device_node *child, int type) +{ + while(child) { + int i; + + for (i=0; i < MAX_MACIO_CHIPS && macio_chips[i].of_node; i++) + if (child == macio_chips[i].of_node && + (!type || macio_chips[i].type == type)) + return &macio_chips[i]; + child = child->parent; + } + return NULL; +} +EXPORT_SYMBOL_GPL(macio_find); + +static const char *macio_names[] = +{ + "Unknown", + "Grand Central", + "OHare", + "OHareII", + "Heathrow", + "Gatwick", + "Paddington", + "Keylargo", + "Pangea", + "Intrepid", + "K2", + "Shasta", +}; + + +struct device_node *uninorth_node; +u32 __iomem *uninorth_base; + +static u32 uninorth_rev; +static int uninorth_maj; +static void __iomem *u3_ht_base; + +/* + * For each motherboard family, we have a table of functions pointers + * that handle the various features. + */ + +typedef long (*feature_call)(struct device_node *node, long param, long value); + +struct feature_table_entry { + unsigned int selector; + feature_call function; +}; + +struct pmac_mb_def +{ + const char* model_string; + const char* model_name; + int model_id; + struct feature_table_entry* features; + unsigned long board_flags; +}; +static struct pmac_mb_def pmac_mb; + +/* + * Here are the chip specific feature functions + */ + +static inline int simple_feature_tweak(struct device_node *node, int type, + int reg, u32 mask, int value) +{ + struct macio_chip* macio; + unsigned long flags; + + macio = macio_find(node, type); + if (!macio) + return -ENODEV; + LOCK(flags); + if (value) + MACIO_BIS(reg, mask); + else + MACIO_BIC(reg, mask); + (void)MACIO_IN32(reg); + UNLOCK(flags); + + return 0; +} + +#ifndef CONFIG_PPC64 + +static long ohare_htw_scc_enable(struct device_node *node, long param, + long value) +{ + struct macio_chip* macio; + unsigned long chan_mask; + unsigned long fcr; + unsigned long flags; + int htw, trans; + unsigned long rmask; + + macio = macio_find(node, 0); + if (!macio) + return -ENODEV; + if (of_node_name_eq(node, "ch-a")) + chan_mask = MACIO_FLAG_SCCA_ON; + else if (of_node_name_eq(node, "ch-b")) + chan_mask = MACIO_FLAG_SCCB_ON; + else + return -ENODEV; + + htw = (macio->type == macio_heathrow || macio->type == macio_paddington + || macio->type == macio_gatwick); + /* On these machines, the HRW_SCC_TRANS_EN_N bit mustn't be touched */ + trans = (pmac_mb.model_id != PMAC_TYPE_YOSEMITE && + pmac_mb.model_id != PMAC_TYPE_YIKES); + if (value) { +#ifdef CONFIG_ADB_PMU + if ((param & 0xfff) == PMAC_SCC_IRDA) + pmu_enable_irled(1); +#endif /* CONFIG_ADB_PMU */ + LOCK(flags); + fcr = MACIO_IN32(OHARE_FCR); + /* Check if scc cell need enabling */ + if (!(fcr & OH_SCC_ENABLE)) { + fcr |= OH_SCC_ENABLE; + if (htw) { + /* Side effect: this will also power up the + * modem, but it's too messy to figure out on which + * ports this controls the transceiver and on which + * it controls the modem + */ + if (trans) + fcr &= ~HRW_SCC_TRANS_EN_N; + MACIO_OUT32(OHARE_FCR, fcr); + fcr |= (rmask = HRW_RESET_SCC); + MACIO_OUT32(OHARE_FCR, fcr); + } else { + fcr |= (rmask = OH_SCC_RESET); + MACIO_OUT32(OHARE_FCR, fcr); + } + UNLOCK(flags); + (void)MACIO_IN32(OHARE_FCR); + mdelay(15); + LOCK(flags); + fcr &= ~rmask; + MACIO_OUT32(OHARE_FCR, fcr); + } + if (chan_mask & MACIO_FLAG_SCCA_ON) + fcr |= OH_SCCA_IO; + if (chan_mask & MACIO_FLAG_SCCB_ON) + fcr |= OH_SCCB_IO; + MACIO_OUT32(OHARE_FCR, fcr); + macio->flags |= chan_mask; + UNLOCK(flags); + if (param & PMAC_SCC_FLAG_XMON) + macio->flags |= MACIO_FLAG_SCC_LOCKED; + } else { + if (macio->flags & MACIO_FLAG_SCC_LOCKED) + return -EPERM; + LOCK(flags); + fcr = MACIO_IN32(OHARE_FCR); + if (chan_mask & MACIO_FLAG_SCCA_ON) + fcr &= ~OH_SCCA_IO; + if (chan_mask & MACIO_FLAG_SCCB_ON) + fcr &= ~OH_SCCB_IO; + MACIO_OUT32(OHARE_FCR, fcr); + if ((fcr & (OH_SCCA_IO | OH_SCCB_IO)) == 0) { + fcr &= ~OH_SCC_ENABLE; + if (htw && trans) + fcr |= HRW_SCC_TRANS_EN_N; + MACIO_OUT32(OHARE_FCR, fcr); + } + macio->flags &= ~(chan_mask); + UNLOCK(flags); + mdelay(10); +#ifdef CONFIG_ADB_PMU + if ((param & 0xfff) == PMAC_SCC_IRDA) + pmu_enable_irled(0); +#endif /* CONFIG_ADB_PMU */ + } + return 0; +} + +static long ohare_floppy_enable(struct device_node *node, long param, + long value) +{ + return simple_feature_tweak(node, macio_ohare, + OHARE_FCR, OH_FLOPPY_ENABLE, value); +} + +static long ohare_mesh_enable(struct device_node *node, long param, long value) +{ + return simple_feature_tweak(node, macio_ohare, + OHARE_FCR, OH_MESH_ENABLE, value); +} + +static long ohare_ide_enable(struct device_node *node, long param, long value) +{ + switch(param) { + case 0: + /* For some reason, setting the bit in set_initial_features() + * doesn't stick. I'm still investigating... --BenH. + */ + if (value) + simple_feature_tweak(node, macio_ohare, + OHARE_FCR, OH_IOBUS_ENABLE, 1); + return simple_feature_tweak(node, macio_ohare, + OHARE_FCR, OH_IDE0_ENABLE, value); + case 1: + return simple_feature_tweak(node, macio_ohare, + OHARE_FCR, OH_BAY_IDE_ENABLE, value); + default: + return -ENODEV; + } +} + +static long ohare_ide_reset(struct device_node *node, long param, long value) +{ + switch(param) { + case 0: + return simple_feature_tweak(node, macio_ohare, + OHARE_FCR, OH_IDE0_RESET_N, !value); + case 1: + return simple_feature_tweak(node, macio_ohare, + OHARE_FCR, OH_IDE1_RESET_N, !value); + default: + return -ENODEV; + } +} + +static long ohare_sleep_state(struct device_node *node, long param, long value) +{ + struct macio_chip* macio = &macio_chips[0]; + + if ((pmac_mb.board_flags & PMAC_MB_CAN_SLEEP) == 0) + return -EPERM; + if (value == 1) { + MACIO_BIC(OHARE_FCR, OH_IOBUS_ENABLE); + } else if (value == 0) { + MACIO_BIS(OHARE_FCR, OH_IOBUS_ENABLE); + } + + return 0; +} + +static long heathrow_modem_enable(struct device_node *node, long param, + long value) +{ + struct macio_chip* macio; + u8 gpio; + unsigned long flags; + + macio = macio_find(node, macio_unknown); + if (!macio) + return -ENODEV; + gpio = MACIO_IN8(HRW_GPIO_MODEM_RESET) & ~1; + if (!value) { + LOCK(flags); + MACIO_OUT8(HRW_GPIO_MODEM_RESET, gpio); + UNLOCK(flags); + (void)MACIO_IN8(HRW_GPIO_MODEM_RESET); + mdelay(250); + } + if (pmac_mb.model_id != PMAC_TYPE_YOSEMITE && + pmac_mb.model_id != PMAC_TYPE_YIKES) { + LOCK(flags); + if (value) + MACIO_BIC(HEATHROW_FCR, HRW_SCC_TRANS_EN_N); + else + MACIO_BIS(HEATHROW_FCR, HRW_SCC_TRANS_EN_N); + UNLOCK(flags); + (void)MACIO_IN32(HEATHROW_FCR); + mdelay(250); + } + if (value) { + LOCK(flags); + MACIO_OUT8(HRW_GPIO_MODEM_RESET, gpio | 1); + (void)MACIO_IN8(HRW_GPIO_MODEM_RESET); + UNLOCK(flags); mdelay(250); LOCK(flags); + MACIO_OUT8(HRW_GPIO_MODEM_RESET, gpio); + (void)MACIO_IN8(HRW_GPIO_MODEM_RESET); + UNLOCK(flags); mdelay(250); LOCK(flags); + MACIO_OUT8(HRW_GPIO_MODEM_RESET, gpio | 1); + (void)MACIO_IN8(HRW_GPIO_MODEM_RESET); + UNLOCK(flags); mdelay(250); + } + return 0; +} + +static long heathrow_floppy_enable(struct device_node *node, long param, + long value) +{ + return simple_feature_tweak(node, macio_unknown, + HEATHROW_FCR, + HRW_SWIM_ENABLE|HRW_BAY_FLOPPY_ENABLE, + value); +} + +static long heathrow_mesh_enable(struct device_node *node, long param, + long value) +{ + struct macio_chip* macio; + unsigned long flags; + + macio = macio_find(node, macio_unknown); + if (!macio) + return -ENODEV; + LOCK(flags); + /* Set clear mesh cell enable */ + if (value) + MACIO_BIS(HEATHROW_FCR, HRW_MESH_ENABLE); + else + MACIO_BIC(HEATHROW_FCR, HRW_MESH_ENABLE); + (void)MACIO_IN32(HEATHROW_FCR); + udelay(10); + /* Set/Clear termination power */ + if (value) + MACIO_BIC(HEATHROW_MBCR, 0x04000000); + else + MACIO_BIS(HEATHROW_MBCR, 0x04000000); + (void)MACIO_IN32(HEATHROW_MBCR); + udelay(10); + UNLOCK(flags); + + return 0; +} + +static long heathrow_ide_enable(struct device_node *node, long param, + long value) +{ + switch(param) { + case 0: + return simple_feature_tweak(node, macio_unknown, + HEATHROW_FCR, HRW_IDE0_ENABLE, value); + case 1: + return simple_feature_tweak(node, macio_unknown, + HEATHROW_FCR, HRW_BAY_IDE_ENABLE, value); + default: + return -ENODEV; + } +} + +static long heathrow_ide_reset(struct device_node *node, long param, + long value) +{ + switch(param) { + case 0: + return simple_feature_tweak(node, macio_unknown, + HEATHROW_FCR, HRW_IDE0_RESET_N, !value); + case 1: + return simple_feature_tweak(node, macio_unknown, + HEATHROW_FCR, HRW_IDE1_RESET_N, !value); + default: + return -ENODEV; + } +} + +static long heathrow_bmac_enable(struct device_node *node, long param, + long value) +{ + struct macio_chip* macio; + unsigned long flags; + + macio = macio_find(node, 0); + if (!macio) + return -ENODEV; + if (value) { + LOCK(flags); + MACIO_BIS(HEATHROW_FCR, HRW_BMAC_IO_ENABLE); + MACIO_BIS(HEATHROW_FCR, HRW_BMAC_RESET); + UNLOCK(flags); + (void)MACIO_IN32(HEATHROW_FCR); + mdelay(10); + LOCK(flags); + MACIO_BIC(HEATHROW_FCR, HRW_BMAC_RESET); + UNLOCK(flags); + (void)MACIO_IN32(HEATHROW_FCR); + mdelay(10); + } else { + LOCK(flags); + MACIO_BIC(HEATHROW_FCR, HRW_BMAC_IO_ENABLE); + UNLOCK(flags); + } + return 0; +} + +static long heathrow_sound_enable(struct device_node *node, long param, + long value) +{ + struct macio_chip* macio; + unsigned long flags; + + /* B&W G3 and Yikes don't support that properly (the + * sound appear to never come back after being shut down). + */ + if (pmac_mb.model_id == PMAC_TYPE_YOSEMITE || + pmac_mb.model_id == PMAC_TYPE_YIKES) + return 0; + + macio = macio_find(node, 0); + if (!macio) + return -ENODEV; + if (value) { + LOCK(flags); + MACIO_BIS(HEATHROW_FCR, HRW_SOUND_CLK_ENABLE); + MACIO_BIC(HEATHROW_FCR, HRW_SOUND_POWER_N); + UNLOCK(flags); + (void)MACIO_IN32(HEATHROW_FCR); + } else { + LOCK(flags); + MACIO_BIS(HEATHROW_FCR, HRW_SOUND_POWER_N); + MACIO_BIC(HEATHROW_FCR, HRW_SOUND_CLK_ENABLE); + UNLOCK(flags); + } + return 0; +} + +static u32 save_fcr[6]; +static u32 save_mbcr; +static struct dbdma_regs save_dbdma[13]; +static struct dbdma_regs save_alt_dbdma[13]; + +static void dbdma_save(struct macio_chip *macio, struct dbdma_regs *save) +{ + int i; + + /* Save state & config of DBDMA channels */ + for (i = 0; i < 13; i++) { + volatile struct dbdma_regs __iomem * chan = (void __iomem *) + (macio->base + ((0x8000+i*0x100)>>2)); + save[i].cmdptr_hi = in_le32(&chan->cmdptr_hi); + save[i].cmdptr = in_le32(&chan->cmdptr); + save[i].intr_sel = in_le32(&chan->intr_sel); + save[i].br_sel = in_le32(&chan->br_sel); + save[i].wait_sel = in_le32(&chan->wait_sel); + } +} + +static void dbdma_restore(struct macio_chip *macio, struct dbdma_regs *save) +{ + int i; + + /* Save state & config of DBDMA channels */ + for (i = 0; i < 13; i++) { + volatile struct dbdma_regs __iomem * chan = (void __iomem *) + (macio->base + ((0x8000+i*0x100)>>2)); + out_le32(&chan->control, (ACTIVE|DEAD|WAKE|FLUSH|PAUSE|RUN)<<16); + while (in_le32(&chan->status) & ACTIVE) + mb(); + out_le32(&chan->cmdptr_hi, save[i].cmdptr_hi); + out_le32(&chan->cmdptr, save[i].cmdptr); + out_le32(&chan->intr_sel, save[i].intr_sel); + out_le32(&chan->br_sel, save[i].br_sel); + out_le32(&chan->wait_sel, save[i].wait_sel); + } +} + +static void heathrow_sleep(struct macio_chip *macio, int secondary) +{ + if (secondary) { + dbdma_save(macio, save_alt_dbdma); + save_fcr[2] = MACIO_IN32(0x38); + save_fcr[3] = MACIO_IN32(0x3c); + } else { + dbdma_save(macio, save_dbdma); + save_fcr[0] = MACIO_IN32(0x38); + save_fcr[1] = MACIO_IN32(0x3c); + save_mbcr = MACIO_IN32(0x34); + /* Make sure sound is shut down */ + MACIO_BIS(HEATHROW_FCR, HRW_SOUND_POWER_N); + MACIO_BIC(HEATHROW_FCR, HRW_SOUND_CLK_ENABLE); + /* This seems to be necessary as well or the fan + * keeps coming up and battery drains fast */ + MACIO_BIC(HEATHROW_FCR, HRW_IOBUS_ENABLE); + MACIO_BIC(HEATHROW_FCR, HRW_IDE0_RESET_N); + /* Make sure eth is down even if module or sleep + * won't work properly */ + MACIO_BIC(HEATHROW_FCR, HRW_BMAC_IO_ENABLE | HRW_BMAC_RESET); + } + /* Make sure modem is shut down */ + MACIO_OUT8(HRW_GPIO_MODEM_RESET, + MACIO_IN8(HRW_GPIO_MODEM_RESET) & ~1); + MACIO_BIS(HEATHROW_FCR, HRW_SCC_TRANS_EN_N); + MACIO_BIC(HEATHROW_FCR, OH_SCCA_IO|OH_SCCB_IO|HRW_SCC_ENABLE); + + /* Let things settle */ + (void)MACIO_IN32(HEATHROW_FCR); +} + +static void heathrow_wakeup(struct macio_chip *macio, int secondary) +{ + if (secondary) { + MACIO_OUT32(0x38, save_fcr[2]); + (void)MACIO_IN32(0x38); + mdelay(1); + MACIO_OUT32(0x3c, save_fcr[3]); + (void)MACIO_IN32(0x38); + mdelay(10); + dbdma_restore(macio, save_alt_dbdma); + } else { + MACIO_OUT32(0x38, save_fcr[0] | HRW_IOBUS_ENABLE); + (void)MACIO_IN32(0x38); + mdelay(1); + MACIO_OUT32(0x3c, save_fcr[1]); + (void)MACIO_IN32(0x38); + mdelay(1); + MACIO_OUT32(0x34, save_mbcr); + (void)MACIO_IN32(0x38); + mdelay(10); + dbdma_restore(macio, save_dbdma); + } +} + +static long heathrow_sleep_state(struct device_node *node, long param, + long value) +{ + if ((pmac_mb.board_flags & PMAC_MB_CAN_SLEEP) == 0) + return -EPERM; + if (value == 1) { + if (macio_chips[1].type == macio_gatwick) + heathrow_sleep(&macio_chips[0], 1); + heathrow_sleep(&macio_chips[0], 0); + } else if (value == 0) { + heathrow_wakeup(&macio_chips[0], 0); + if (macio_chips[1].type == macio_gatwick) + heathrow_wakeup(&macio_chips[0], 1); + } + return 0; +} + +static long core99_scc_enable(struct device_node *node, long param, long value) +{ + struct macio_chip* macio; + unsigned long flags; + unsigned long chan_mask; + u32 fcr; + + macio = macio_find(node, 0); + if (!macio) + return -ENODEV; + if (of_node_name_eq(node, "ch-a")) + chan_mask = MACIO_FLAG_SCCA_ON; + else if (of_node_name_eq(node, "ch-b")) + chan_mask = MACIO_FLAG_SCCB_ON; + else + return -ENODEV; + + if (value) { + int need_reset_scc = 0; + int need_reset_irda = 0; + + LOCK(flags); + fcr = MACIO_IN32(KEYLARGO_FCR0); + /* Check if scc cell need enabling */ + if (!(fcr & KL0_SCC_CELL_ENABLE)) { + fcr |= KL0_SCC_CELL_ENABLE; + need_reset_scc = 1; + } + if (chan_mask & MACIO_FLAG_SCCA_ON) { + fcr |= KL0_SCCA_ENABLE; + /* Don't enable line drivers for I2S modem */ + if ((param & 0xfff) == PMAC_SCC_I2S1) + fcr &= ~KL0_SCC_A_INTF_ENABLE; + else + fcr |= KL0_SCC_A_INTF_ENABLE; + } + if (chan_mask & MACIO_FLAG_SCCB_ON) { + fcr |= KL0_SCCB_ENABLE; + /* Perform irda specific inits */ + if ((param & 0xfff) == PMAC_SCC_IRDA) { + fcr &= ~KL0_SCC_B_INTF_ENABLE; + fcr |= KL0_IRDA_ENABLE; + fcr |= KL0_IRDA_CLK32_ENABLE | KL0_IRDA_CLK19_ENABLE; + fcr |= KL0_IRDA_SOURCE1_SEL; + fcr &= ~(KL0_IRDA_FAST_CONNECT|KL0_IRDA_DEFAULT1|KL0_IRDA_DEFAULT0); + fcr &= ~(KL0_IRDA_SOURCE2_SEL|KL0_IRDA_HIGH_BAND); + need_reset_irda = 1; + } else + fcr |= KL0_SCC_B_INTF_ENABLE; + } + MACIO_OUT32(KEYLARGO_FCR0, fcr); + macio->flags |= chan_mask; + if (need_reset_scc) { + MACIO_BIS(KEYLARGO_FCR0, KL0_SCC_RESET); + (void)MACIO_IN32(KEYLARGO_FCR0); + UNLOCK(flags); + mdelay(15); + LOCK(flags); + MACIO_BIC(KEYLARGO_FCR0, KL0_SCC_RESET); + } + if (need_reset_irda) { + MACIO_BIS(KEYLARGO_FCR0, KL0_IRDA_RESET); + (void)MACIO_IN32(KEYLARGO_FCR0); + UNLOCK(flags); + mdelay(15); + LOCK(flags); + MACIO_BIC(KEYLARGO_FCR0, KL0_IRDA_RESET); + } + UNLOCK(flags); + if (param & PMAC_SCC_FLAG_XMON) + macio->flags |= MACIO_FLAG_SCC_LOCKED; + } else { + if (macio->flags & MACIO_FLAG_SCC_LOCKED) + return -EPERM; + LOCK(flags); + fcr = MACIO_IN32(KEYLARGO_FCR0); + if (chan_mask & MACIO_FLAG_SCCA_ON) + fcr &= ~KL0_SCCA_ENABLE; + if (chan_mask & MACIO_FLAG_SCCB_ON) { + fcr &= ~KL0_SCCB_ENABLE; + /* Perform irda specific clears */ + if ((param & 0xfff) == PMAC_SCC_IRDA) { + fcr &= ~KL0_IRDA_ENABLE; + fcr &= ~(KL0_IRDA_CLK32_ENABLE | KL0_IRDA_CLK19_ENABLE); + fcr &= ~(KL0_IRDA_FAST_CONNECT|KL0_IRDA_DEFAULT1|KL0_IRDA_DEFAULT0); + fcr &= ~(KL0_IRDA_SOURCE1_SEL|KL0_IRDA_SOURCE2_SEL|KL0_IRDA_HIGH_BAND); + } + } + MACIO_OUT32(KEYLARGO_FCR0, fcr); + if ((fcr & (KL0_SCCA_ENABLE | KL0_SCCB_ENABLE)) == 0) { + fcr &= ~KL0_SCC_CELL_ENABLE; + MACIO_OUT32(KEYLARGO_FCR0, fcr); + } + macio->flags &= ~(chan_mask); + UNLOCK(flags); + mdelay(10); + } + return 0; +} + +static long +core99_modem_enable(struct device_node *node, long param, long value) +{ + struct macio_chip* macio; + u8 gpio; + unsigned long flags; + + /* Hack for internal USB modem */ + if (node == NULL) { + if (macio_chips[0].type != macio_keylargo) + return -ENODEV; + node = macio_chips[0].of_node; + } + macio = macio_find(node, 0); + if (!macio) + return -ENODEV; + gpio = MACIO_IN8(KL_GPIO_MODEM_RESET); + gpio |= KEYLARGO_GPIO_OUTPUT_ENABLE; + gpio &= ~KEYLARGO_GPIO_OUTOUT_DATA; + + if (!value) { + LOCK(flags); + MACIO_OUT8(KL_GPIO_MODEM_RESET, gpio); + UNLOCK(flags); + (void)MACIO_IN8(KL_GPIO_MODEM_RESET); + mdelay(250); + } + LOCK(flags); + if (value) { + MACIO_BIC(KEYLARGO_FCR2, KL2_ALT_DATA_OUT); + UNLOCK(flags); + (void)MACIO_IN32(KEYLARGO_FCR2); + mdelay(250); + } else { + MACIO_BIS(KEYLARGO_FCR2, KL2_ALT_DATA_OUT); + UNLOCK(flags); + } + if (value) { + LOCK(flags); + MACIO_OUT8(KL_GPIO_MODEM_RESET, gpio | KEYLARGO_GPIO_OUTOUT_DATA); + (void)MACIO_IN8(KL_GPIO_MODEM_RESET); + UNLOCK(flags); mdelay(250); LOCK(flags); + MACIO_OUT8(KL_GPIO_MODEM_RESET, gpio); + (void)MACIO_IN8(KL_GPIO_MODEM_RESET); + UNLOCK(flags); mdelay(250); LOCK(flags); + MACIO_OUT8(KL_GPIO_MODEM_RESET, gpio | KEYLARGO_GPIO_OUTOUT_DATA); + (void)MACIO_IN8(KL_GPIO_MODEM_RESET); + UNLOCK(flags); mdelay(250); + } + return 0; +} + +static long +pangea_modem_enable(struct device_node *node, long param, long value) +{ + struct macio_chip* macio; + u8 gpio; + unsigned long flags; + + /* Hack for internal USB modem */ + if (node == NULL) { + if (macio_chips[0].type != macio_pangea && + macio_chips[0].type != macio_intrepid) + return -ENODEV; + node = macio_chips[0].of_node; + } + macio = macio_find(node, 0); + if (!macio) + return -ENODEV; + gpio = MACIO_IN8(KL_GPIO_MODEM_RESET); + gpio |= KEYLARGO_GPIO_OUTPUT_ENABLE; + gpio &= ~KEYLARGO_GPIO_OUTOUT_DATA; + + if (!value) { + LOCK(flags); + MACIO_OUT8(KL_GPIO_MODEM_RESET, gpio); + UNLOCK(flags); + (void)MACIO_IN8(KL_GPIO_MODEM_RESET); + mdelay(250); + } + LOCK(flags); + if (value) { + MACIO_OUT8(KL_GPIO_MODEM_POWER, + KEYLARGO_GPIO_OUTPUT_ENABLE); + UNLOCK(flags); + (void)MACIO_IN32(KEYLARGO_FCR2); + mdelay(250); + } else { + MACIO_OUT8(KL_GPIO_MODEM_POWER, + KEYLARGO_GPIO_OUTPUT_ENABLE | KEYLARGO_GPIO_OUTOUT_DATA); + UNLOCK(flags); + } + if (value) { + LOCK(flags); + MACIO_OUT8(KL_GPIO_MODEM_RESET, gpio | KEYLARGO_GPIO_OUTOUT_DATA); + (void)MACIO_IN8(KL_GPIO_MODEM_RESET); + UNLOCK(flags); mdelay(250); LOCK(flags); + MACIO_OUT8(KL_GPIO_MODEM_RESET, gpio); + (void)MACIO_IN8(KL_GPIO_MODEM_RESET); + UNLOCK(flags); mdelay(250); LOCK(flags); + MACIO_OUT8(KL_GPIO_MODEM_RESET, gpio | KEYLARGO_GPIO_OUTOUT_DATA); + (void)MACIO_IN8(KL_GPIO_MODEM_RESET); + UNLOCK(flags); mdelay(250); + } + return 0; +} + +static long +core99_ata100_enable(struct device_node *node, long value) +{ + unsigned long flags; + struct pci_dev *pdev = NULL; + u8 pbus, pid; + int rc; + + if (uninorth_rev < 0x24) + return -ENODEV; + + LOCK(flags); + if (value) + UN_BIS(UNI_N_CLOCK_CNTL, UNI_N_CLOCK_CNTL_ATA100); + else + UN_BIC(UNI_N_CLOCK_CNTL, UNI_N_CLOCK_CNTL_ATA100); + (void)UN_IN(UNI_N_CLOCK_CNTL); + UNLOCK(flags); + udelay(20); + + if (value) { + if (pci_device_from_OF_node(node, &pbus, &pid) == 0) + pdev = pci_get_domain_bus_and_slot(0, pbus, pid); + if (pdev == NULL) + return 0; + rc = pci_enable_device(pdev); + if (rc == 0) + pci_set_master(pdev); + pci_dev_put(pdev); + if (rc) + return rc; + } + return 0; +} + +static long +core99_ide_enable(struct device_node *node, long param, long value) +{ + /* Bus ID 0 to 2 are KeyLargo based IDE, busID 3 is U2 + * based ata-100 + */ + switch(param) { + case 0: + return simple_feature_tweak(node, macio_unknown, + KEYLARGO_FCR1, KL1_EIDE0_ENABLE, value); + case 1: + return simple_feature_tweak(node, macio_unknown, + KEYLARGO_FCR1, KL1_EIDE1_ENABLE, value); + case 2: + return simple_feature_tweak(node, macio_unknown, + KEYLARGO_FCR1, KL1_UIDE_ENABLE, value); + case 3: + return core99_ata100_enable(node, value); + default: + return -ENODEV; + } +} + +static long +core99_ide_reset(struct device_node *node, long param, long value) +{ + switch(param) { + case 0: + return simple_feature_tweak(node, macio_unknown, + KEYLARGO_FCR1, KL1_EIDE0_RESET_N, !value); + case 1: + return simple_feature_tweak(node, macio_unknown, + KEYLARGO_FCR1, KL1_EIDE1_RESET_N, !value); + case 2: + return simple_feature_tweak(node, macio_unknown, + KEYLARGO_FCR1, KL1_UIDE_RESET_N, !value); + default: + return -ENODEV; + } +} + +static long +core99_gmac_enable(struct device_node *node, long param, long value) +{ + unsigned long flags; + + LOCK(flags); + if (value) + UN_BIS(UNI_N_CLOCK_CNTL, UNI_N_CLOCK_CNTL_GMAC); + else + UN_BIC(UNI_N_CLOCK_CNTL, UNI_N_CLOCK_CNTL_GMAC); + (void)UN_IN(UNI_N_CLOCK_CNTL); + UNLOCK(flags); + udelay(20); + + return 0; +} + +static long +core99_gmac_phy_reset(struct device_node *node, long param, long value) +{ + unsigned long flags; + struct macio_chip *macio; + + macio = &macio_chips[0]; + if (macio->type != macio_keylargo && macio->type != macio_pangea && + macio->type != macio_intrepid) + return -ENODEV; + + LOCK(flags); + MACIO_OUT8(KL_GPIO_ETH_PHY_RESET, KEYLARGO_GPIO_OUTPUT_ENABLE); + (void)MACIO_IN8(KL_GPIO_ETH_PHY_RESET); + UNLOCK(flags); + mdelay(10); + LOCK(flags); + MACIO_OUT8(KL_GPIO_ETH_PHY_RESET, /*KEYLARGO_GPIO_OUTPUT_ENABLE | */ + KEYLARGO_GPIO_OUTOUT_DATA); + UNLOCK(flags); + mdelay(10); + + return 0; +} + +static long +core99_sound_chip_enable(struct device_node *node, long param, long value) +{ + struct macio_chip* macio; + unsigned long flags; + + macio = macio_find(node, 0); + if (!macio) + return -ENODEV; + + /* Do a better probe code, screamer G4 desktops & + * iMacs can do that too, add a recalibrate in + * the driver as well + */ + if (pmac_mb.model_id == PMAC_TYPE_PISMO || + pmac_mb.model_id == PMAC_TYPE_TITANIUM) { + LOCK(flags); + if (value) + MACIO_OUT8(KL_GPIO_SOUND_POWER, + KEYLARGO_GPIO_OUTPUT_ENABLE | + KEYLARGO_GPIO_OUTOUT_DATA); + else + MACIO_OUT8(KL_GPIO_SOUND_POWER, + KEYLARGO_GPIO_OUTPUT_ENABLE); + (void)MACIO_IN8(KL_GPIO_SOUND_POWER); + UNLOCK(flags); + } + return 0; +} + +static long +core99_airport_enable(struct device_node *node, long param, long value) +{ + struct macio_chip* macio; + unsigned long flags; + int state; + + macio = macio_find(node, 0); + if (!macio) + return -ENODEV; + + /* Hint: we allow passing of macio itself for the sake of the + * sleep code + */ + if (node != macio->of_node && + (!node->parent || node->parent != macio->of_node)) + return -ENODEV; + state = (macio->flags & MACIO_FLAG_AIRPORT_ON) != 0; + if (value == state) + return 0; + if (value) { + /* This code is a reproduction of OF enable-cardslot + * and init-wireless methods, slightly hacked until + * I got it working. + */ + LOCK(flags); + MACIO_OUT8(KEYLARGO_GPIO_0+0xf, 5); + (void)MACIO_IN8(KEYLARGO_GPIO_0+0xf); + UNLOCK(flags); + mdelay(10); + LOCK(flags); + MACIO_OUT8(KEYLARGO_GPIO_0+0xf, 4); + (void)MACIO_IN8(KEYLARGO_GPIO_0+0xf); + UNLOCK(flags); + + mdelay(10); + + LOCK(flags); + MACIO_BIC(KEYLARGO_FCR2, KL2_CARDSEL_16); + (void)MACIO_IN32(KEYLARGO_FCR2); + udelay(10); + MACIO_OUT8(KEYLARGO_GPIO_EXTINT_0+0xb, 0); + (void)MACIO_IN8(KEYLARGO_GPIO_EXTINT_0+0xb); + udelay(10); + MACIO_OUT8(KEYLARGO_GPIO_EXTINT_0+0xa, 0x28); + (void)MACIO_IN8(KEYLARGO_GPIO_EXTINT_0+0xa); + udelay(10); + MACIO_OUT8(KEYLARGO_GPIO_EXTINT_0+0xd, 0x28); + (void)MACIO_IN8(KEYLARGO_GPIO_EXTINT_0+0xd); + udelay(10); + MACIO_OUT8(KEYLARGO_GPIO_0+0xd, 0x28); + (void)MACIO_IN8(KEYLARGO_GPIO_0+0xd); + udelay(10); + MACIO_OUT8(KEYLARGO_GPIO_0+0xe, 0x28); + (void)MACIO_IN8(KEYLARGO_GPIO_0+0xe); + UNLOCK(flags); + udelay(10); + MACIO_OUT32(0x1c000, 0); + mdelay(1); + MACIO_OUT8(0x1a3e0, 0x41); + (void)MACIO_IN8(0x1a3e0); + udelay(10); + LOCK(flags); + MACIO_BIS(KEYLARGO_FCR2, KL2_CARDSEL_16); + (void)MACIO_IN32(KEYLARGO_FCR2); + UNLOCK(flags); + mdelay(100); + + macio->flags |= MACIO_FLAG_AIRPORT_ON; + } else { + LOCK(flags); + MACIO_BIC(KEYLARGO_FCR2, KL2_CARDSEL_16); + (void)MACIO_IN32(KEYLARGO_FCR2); + MACIO_OUT8(KL_GPIO_AIRPORT_0, 0); + MACIO_OUT8(KL_GPIO_AIRPORT_1, 0); + MACIO_OUT8(KL_GPIO_AIRPORT_2, 0); + MACIO_OUT8(KL_GPIO_AIRPORT_3, 0); + MACIO_OUT8(KL_GPIO_AIRPORT_4, 0); + (void)MACIO_IN8(KL_GPIO_AIRPORT_4); + UNLOCK(flags); + + macio->flags &= ~MACIO_FLAG_AIRPORT_ON; + } + return 0; +} + +#ifdef CONFIG_SMP +static long +core99_reset_cpu(struct device_node *node, long param, long value) +{ + unsigned int reset_io = 0; + unsigned long flags; + struct macio_chip *macio; + struct device_node *np; + const int dflt_reset_lines[] = { KL_GPIO_RESET_CPU0, + KL_GPIO_RESET_CPU1, + KL_GPIO_RESET_CPU2, + KL_GPIO_RESET_CPU3 }; + + macio = &macio_chips[0]; + if (macio->type != macio_keylargo) + return -ENODEV; + + for_each_of_cpu_node(np) { + const u32 *num = of_get_property(np, "reg", NULL); + const u32 *rst = of_get_property(np, "soft-reset", NULL); + if (num == NULL || rst == NULL) + continue; + if (param == *num) { + reset_io = *rst; + break; + } + } + if (np == NULL || reset_io == 0) + reset_io = dflt_reset_lines[param]; + + LOCK(flags); + MACIO_OUT8(reset_io, KEYLARGO_GPIO_OUTPUT_ENABLE); + (void)MACIO_IN8(reset_io); + udelay(1); + MACIO_OUT8(reset_io, 0); + (void)MACIO_IN8(reset_io); + UNLOCK(flags); + + return 0; +} +#endif /* CONFIG_SMP */ + +static long +core99_usb_enable(struct device_node *node, long param, long value) +{ + struct macio_chip *macio; + unsigned long flags; + const char *prop; + int number; + u32 reg; + + macio = &macio_chips[0]; + if (macio->type != macio_keylargo && macio->type != macio_pangea && + macio->type != macio_intrepid) + return -ENODEV; + + prop = of_get_property(node, "AAPL,clock-id", NULL); + if (!prop) + return -ENODEV; + if (strncmp(prop, "usb0u048", 8) == 0) + number = 0; + else if (strncmp(prop, "usb1u148", 8) == 0) + number = 2; + else if (strncmp(prop, "usb2u248", 8) == 0) + number = 4; + else + return -ENODEV; + + /* Sorry for the brute-force locking, but this is only used during + * sleep and the timing seem to be critical + */ + LOCK(flags); + if (value) { + /* Turn ON */ + if (number == 0) { + MACIO_BIC(KEYLARGO_FCR0, (KL0_USB0_PAD_SUSPEND0 | KL0_USB0_PAD_SUSPEND1)); + (void)MACIO_IN32(KEYLARGO_FCR0); + UNLOCK(flags); + mdelay(1); + LOCK(flags); + MACIO_BIS(KEYLARGO_FCR0, KL0_USB0_CELL_ENABLE); + } else if (number == 2) { + MACIO_BIC(KEYLARGO_FCR0, (KL0_USB1_PAD_SUSPEND0 | KL0_USB1_PAD_SUSPEND1)); + UNLOCK(flags); + (void)MACIO_IN32(KEYLARGO_FCR0); + mdelay(1); + LOCK(flags); + MACIO_BIS(KEYLARGO_FCR0, KL0_USB1_CELL_ENABLE); + } else if (number == 4) { + MACIO_BIC(KEYLARGO_FCR1, (KL1_USB2_PAD_SUSPEND0 | KL1_USB2_PAD_SUSPEND1)); + UNLOCK(flags); + (void)MACIO_IN32(KEYLARGO_FCR1); + mdelay(1); + LOCK(flags); + MACIO_BIS(KEYLARGO_FCR1, KL1_USB2_CELL_ENABLE); + } + if (number < 4) { + reg = MACIO_IN32(KEYLARGO_FCR4); + reg &= ~(KL4_PORT_WAKEUP_ENABLE(number) | KL4_PORT_RESUME_WAKE_EN(number) | + KL4_PORT_CONNECT_WAKE_EN(number) | KL4_PORT_DISCONNECT_WAKE_EN(number)); + reg &= ~(KL4_PORT_WAKEUP_ENABLE(number+1) | KL4_PORT_RESUME_WAKE_EN(number+1) | + KL4_PORT_CONNECT_WAKE_EN(number+1) | KL4_PORT_DISCONNECT_WAKE_EN(number+1)); + MACIO_OUT32(KEYLARGO_FCR4, reg); + (void)MACIO_IN32(KEYLARGO_FCR4); + udelay(10); + } else { + reg = MACIO_IN32(KEYLARGO_FCR3); + reg &= ~(KL3_IT_PORT_WAKEUP_ENABLE(0) | KL3_IT_PORT_RESUME_WAKE_EN(0) | + KL3_IT_PORT_CONNECT_WAKE_EN(0) | KL3_IT_PORT_DISCONNECT_WAKE_EN(0)); + reg &= ~(KL3_IT_PORT_WAKEUP_ENABLE(1) | KL3_IT_PORT_RESUME_WAKE_EN(1) | + KL3_IT_PORT_CONNECT_WAKE_EN(1) | KL3_IT_PORT_DISCONNECT_WAKE_EN(1)); + MACIO_OUT32(KEYLARGO_FCR3, reg); + (void)MACIO_IN32(KEYLARGO_FCR3); + udelay(10); + } + if (macio->type == macio_intrepid) { + /* wait for clock stopped bits to clear */ + u32 test0 = 0, test1 = 0; + u32 status0, status1; + int timeout = 1000; + + UNLOCK(flags); + switch (number) { + case 0: + test0 = UNI_N_CLOCK_STOPPED_USB0; + test1 = UNI_N_CLOCK_STOPPED_USB0PCI; + break; + case 2: + test0 = UNI_N_CLOCK_STOPPED_USB1; + test1 = UNI_N_CLOCK_STOPPED_USB1PCI; + break; + case 4: + test0 = UNI_N_CLOCK_STOPPED_USB2; + test1 = UNI_N_CLOCK_STOPPED_USB2PCI; + break; + } + do { + if (--timeout <= 0) { + printk(KERN_ERR "core99_usb_enable: " + "Timeout waiting for clocks\n"); + break; + } + mdelay(1); + status0 = UN_IN(UNI_N_CLOCK_STOP_STATUS0); + status1 = UN_IN(UNI_N_CLOCK_STOP_STATUS1); + } while ((status0 & test0) | (status1 & test1)); + LOCK(flags); + } + } else { + /* Turn OFF */ + if (number < 4) { + reg = MACIO_IN32(KEYLARGO_FCR4); + reg |= KL4_PORT_WAKEUP_ENABLE(number) | KL4_PORT_RESUME_WAKE_EN(number) | + KL4_PORT_CONNECT_WAKE_EN(number) | KL4_PORT_DISCONNECT_WAKE_EN(number); + reg |= KL4_PORT_WAKEUP_ENABLE(number+1) | KL4_PORT_RESUME_WAKE_EN(number+1) | + KL4_PORT_CONNECT_WAKE_EN(number+1) | KL4_PORT_DISCONNECT_WAKE_EN(number+1); + MACIO_OUT32(KEYLARGO_FCR4, reg); + (void)MACIO_IN32(KEYLARGO_FCR4); + udelay(1); + } else { + reg = MACIO_IN32(KEYLARGO_FCR3); + reg |= KL3_IT_PORT_WAKEUP_ENABLE(0) | KL3_IT_PORT_RESUME_WAKE_EN(0) | + KL3_IT_PORT_CONNECT_WAKE_EN(0) | KL3_IT_PORT_DISCONNECT_WAKE_EN(0); + reg |= KL3_IT_PORT_WAKEUP_ENABLE(1) | KL3_IT_PORT_RESUME_WAKE_EN(1) | + KL3_IT_PORT_CONNECT_WAKE_EN(1) | KL3_IT_PORT_DISCONNECT_WAKE_EN(1); + MACIO_OUT32(KEYLARGO_FCR3, reg); + (void)MACIO_IN32(KEYLARGO_FCR3); + udelay(1); + } + if (number == 0) { + if (macio->type != macio_intrepid) + MACIO_BIC(KEYLARGO_FCR0, KL0_USB0_CELL_ENABLE); + (void)MACIO_IN32(KEYLARGO_FCR0); + udelay(1); + MACIO_BIS(KEYLARGO_FCR0, (KL0_USB0_PAD_SUSPEND0 | KL0_USB0_PAD_SUSPEND1)); + (void)MACIO_IN32(KEYLARGO_FCR0); + } else if (number == 2) { + if (macio->type != macio_intrepid) + MACIO_BIC(KEYLARGO_FCR0, KL0_USB1_CELL_ENABLE); + (void)MACIO_IN32(KEYLARGO_FCR0); + udelay(1); + MACIO_BIS(KEYLARGO_FCR0, (KL0_USB1_PAD_SUSPEND0 | KL0_USB1_PAD_SUSPEND1)); + (void)MACIO_IN32(KEYLARGO_FCR0); + } else if (number == 4) { + udelay(1); + MACIO_BIS(KEYLARGO_FCR1, (KL1_USB2_PAD_SUSPEND0 | KL1_USB2_PAD_SUSPEND1)); + (void)MACIO_IN32(KEYLARGO_FCR1); + } + udelay(1); + } + UNLOCK(flags); + + return 0; +} + +static long +core99_firewire_enable(struct device_node *node, long param, long value) +{ + unsigned long flags; + struct macio_chip *macio; + + macio = &macio_chips[0]; + if (macio->type != macio_keylargo && macio->type != macio_pangea && + macio->type != macio_intrepid) + return -ENODEV; + if (!(macio->flags & MACIO_FLAG_FW_SUPPORTED)) + return -ENODEV; + + LOCK(flags); + if (value) { + UN_BIS(UNI_N_CLOCK_CNTL, UNI_N_CLOCK_CNTL_FW); + (void)UN_IN(UNI_N_CLOCK_CNTL); + } else { + UN_BIC(UNI_N_CLOCK_CNTL, UNI_N_CLOCK_CNTL_FW); + (void)UN_IN(UNI_N_CLOCK_CNTL); + } + UNLOCK(flags); + mdelay(1); + + return 0; +} + +static long +core99_firewire_cable_power(struct device_node *node, long param, long value) +{ + unsigned long flags; + struct macio_chip *macio; + + /* Trick: we allow NULL node */ + if ((pmac_mb.board_flags & PMAC_MB_HAS_FW_POWER) == 0) + return -ENODEV; + macio = &macio_chips[0]; + if (macio->type != macio_keylargo && macio->type != macio_pangea && + macio->type != macio_intrepid) + return -ENODEV; + if (!(macio->flags & MACIO_FLAG_FW_SUPPORTED)) + return -ENODEV; + + LOCK(flags); + if (value) { + MACIO_OUT8(KL_GPIO_FW_CABLE_POWER , 0); + MACIO_IN8(KL_GPIO_FW_CABLE_POWER); + udelay(10); + } else { + MACIO_OUT8(KL_GPIO_FW_CABLE_POWER , 4); + MACIO_IN8(KL_GPIO_FW_CABLE_POWER); udelay(10); + } + UNLOCK(flags); + mdelay(1); + + return 0; +} + +static long +intrepid_aack_delay_enable(struct device_node *node, long param, long value) +{ + unsigned long flags; + + if (uninorth_rev < 0xd2) + return -ENODEV; + + LOCK(flags); + if (param) + UN_BIS(UNI_N_AACK_DELAY, UNI_N_AACK_DELAY_ENABLE); + else + UN_BIC(UNI_N_AACK_DELAY, UNI_N_AACK_DELAY_ENABLE); + UNLOCK(flags); + + return 0; +} + + +#endif /* CONFIG_PPC64 */ + +static long +core99_read_gpio(struct device_node *node, long param, long value) +{ + struct macio_chip *macio = &macio_chips[0]; + + return MACIO_IN8(param); +} + + +static long +core99_write_gpio(struct device_node *node, long param, long value) +{ + struct macio_chip *macio = &macio_chips[0]; + + MACIO_OUT8(param, (u8)(value & 0xff)); + return 0; +} + +#ifdef CONFIG_PPC64 +static long g5_gmac_enable(struct device_node *node, long param, long value) +{ + struct macio_chip *macio = &macio_chips[0]; + unsigned long flags; + + if (node == NULL) + return -ENODEV; + + LOCK(flags); + if (value) { + MACIO_BIS(KEYLARGO_FCR1, K2_FCR1_GMAC_CLK_ENABLE); + mb(); + k2_skiplist[0] = NULL; + } else { + k2_skiplist[0] = node; + mb(); + MACIO_BIC(KEYLARGO_FCR1, K2_FCR1_GMAC_CLK_ENABLE); + } + + UNLOCK(flags); + mdelay(1); + + return 0; +} + +static long g5_fw_enable(struct device_node *node, long param, long value) +{ + struct macio_chip *macio = &macio_chips[0]; + unsigned long flags; + + if (node == NULL) + return -ENODEV; + + LOCK(flags); + if (value) { + MACIO_BIS(KEYLARGO_FCR1, K2_FCR1_FW_CLK_ENABLE); + mb(); + k2_skiplist[1] = NULL; + } else { + k2_skiplist[1] = node; + mb(); + MACIO_BIC(KEYLARGO_FCR1, K2_FCR1_FW_CLK_ENABLE); + } + + UNLOCK(flags); + mdelay(1); + + return 0; +} + +static long g5_mpic_enable(struct device_node *node, long param, long value) +{ + unsigned long flags; + struct device_node *parent = of_get_parent(node); + int is_u3; + + if (parent == NULL) + return 0; + is_u3 = of_node_name_eq(parent, "u3") || of_node_name_eq(parent, "u4"); + of_node_put(parent); + if (!is_u3) + return 0; + + LOCK(flags); + UN_BIS(U3_TOGGLE_REG, U3_MPIC_RESET | U3_MPIC_OUTPUT_ENABLE); + UNLOCK(flags); + + return 0; +} + +static long g5_eth_phy_reset(struct device_node *node, long param, long value) +{ + struct macio_chip *macio = &macio_chips[0]; + struct device_node *phy; + int need_reset; + + /* + * We must not reset the combo PHYs, only the BCM5221 found in + * the iMac G5. + */ + phy = of_get_next_child(node, NULL); + if (!phy) + return -ENODEV; + need_reset = of_device_is_compatible(phy, "B5221"); + of_node_put(phy); + if (!need_reset) + return 0; + + /* PHY reset is GPIO 29, not in device-tree unfortunately */ + MACIO_OUT8(K2_GPIO_EXTINT_0 + 29, + KEYLARGO_GPIO_OUTPUT_ENABLE | KEYLARGO_GPIO_OUTOUT_DATA); + /* Thankfully, this is now always called at a time when we can + * schedule by sungem. + */ + msleep(10); + MACIO_OUT8(K2_GPIO_EXTINT_0 + 29, 0); + + return 0; +} + +static long g5_i2s_enable(struct device_node *node, long param, long value) +{ + /* Very crude implementation for now */ + struct macio_chip *macio = &macio_chips[0]; + unsigned long flags; + int cell; + u32 fcrs[3][3] = { + { 0, + K2_FCR1_I2S0_CELL_ENABLE | + K2_FCR1_I2S0_CLK_ENABLE_BIT | K2_FCR1_I2S0_ENABLE, + KL3_I2S0_CLK18_ENABLE + }, + { KL0_SCC_A_INTF_ENABLE, + K2_FCR1_I2S1_CELL_ENABLE | + K2_FCR1_I2S1_CLK_ENABLE_BIT | K2_FCR1_I2S1_ENABLE, + KL3_I2S1_CLK18_ENABLE + }, + { KL0_SCC_B_INTF_ENABLE, + SH_FCR1_I2S2_CELL_ENABLE | + SH_FCR1_I2S2_CLK_ENABLE_BIT | SH_FCR1_I2S2_ENABLE, + SH_FCR3_I2S2_CLK18_ENABLE + }, + }; + + if (macio->type != macio_keylargo2 && macio->type != macio_shasta) + return -ENODEV; + if (strncmp(node->name, "i2s-", 4)) + return -ENODEV; + cell = node->name[4] - 'a'; + switch(cell) { + case 0: + case 1: + break; + case 2: + if (macio->type == macio_shasta) + break; + fallthrough; + default: + return -ENODEV; + } + + LOCK(flags); + if (value) { + MACIO_BIC(KEYLARGO_FCR0, fcrs[cell][0]); + MACIO_BIS(KEYLARGO_FCR1, fcrs[cell][1]); + MACIO_BIS(KEYLARGO_FCR3, fcrs[cell][2]); + } else { + MACIO_BIC(KEYLARGO_FCR3, fcrs[cell][2]); + MACIO_BIC(KEYLARGO_FCR1, fcrs[cell][1]); + MACIO_BIS(KEYLARGO_FCR0, fcrs[cell][0]); + } + udelay(10); + UNLOCK(flags); + + return 0; +} + + +#ifdef CONFIG_SMP +static long g5_reset_cpu(struct device_node *node, long param, long value) +{ + unsigned int reset_io = 0; + unsigned long flags; + struct macio_chip *macio; + struct device_node *np; + + macio = &macio_chips[0]; + if (macio->type != macio_keylargo2 && macio->type != macio_shasta) + return -ENODEV; + + for_each_of_cpu_node(np) { + const u32 *num = of_get_property(np, "reg", NULL); + const u32 *rst = of_get_property(np, "soft-reset", NULL); + if (num == NULL || rst == NULL) + continue; + if (param == *num) { + reset_io = *rst; + break; + } + } + if (np == NULL || reset_io == 0) + return -ENODEV; + + LOCK(flags); + MACIO_OUT8(reset_io, KEYLARGO_GPIO_OUTPUT_ENABLE); + (void)MACIO_IN8(reset_io); + udelay(1); + MACIO_OUT8(reset_io, 0); + (void)MACIO_IN8(reset_io); + UNLOCK(flags); + + return 0; +} +#endif /* CONFIG_SMP */ + +/* + * This can be called from pmac_smp so isn't static + * + * This takes the second CPU off the bus on dual CPU machines + * running UP + */ +void __init g5_phy_disable_cpu1(void) +{ + if (uninorth_maj == 3) + UN_OUT(U3_API_PHY_CONFIG_1, 0); +} +#endif /* CONFIG_PPC64 */ + +#ifndef CONFIG_PPC64 + + +#ifdef CONFIG_PM +static u32 save_gpio_levels[2]; +static u8 save_gpio_extint[KEYLARGO_GPIO_EXTINT_CNT]; +static u8 save_gpio_normal[KEYLARGO_GPIO_CNT]; +static u32 save_unin_clock_ctl; + +static void keylargo_shutdown(struct macio_chip *macio, int sleep_mode) +{ + u32 temp; + + if (sleep_mode) { + mdelay(1); + MACIO_BIS(KEYLARGO_FCR0, KL0_USB_REF_SUSPEND); + (void)MACIO_IN32(KEYLARGO_FCR0); + mdelay(1); + } + + MACIO_BIC(KEYLARGO_FCR0,KL0_SCCA_ENABLE | KL0_SCCB_ENABLE | + KL0_SCC_CELL_ENABLE | + KL0_IRDA_ENABLE | KL0_IRDA_CLK32_ENABLE | + KL0_IRDA_CLK19_ENABLE); + + MACIO_BIC(KEYLARGO_MBCR, KL_MBCR_MB0_DEV_MASK); + MACIO_BIS(KEYLARGO_MBCR, KL_MBCR_MB0_IDE_ENABLE); + + MACIO_BIC(KEYLARGO_FCR1, + KL1_AUDIO_SEL_22MCLK | KL1_AUDIO_CLK_ENABLE_BIT | + KL1_AUDIO_CLK_OUT_ENABLE | KL1_AUDIO_CELL_ENABLE | + KL1_I2S0_CELL_ENABLE | KL1_I2S0_CLK_ENABLE_BIT | + KL1_I2S0_ENABLE | KL1_I2S1_CELL_ENABLE | + KL1_I2S1_CLK_ENABLE_BIT | KL1_I2S1_ENABLE | + KL1_EIDE0_ENABLE | KL1_EIDE0_RESET_N | + KL1_EIDE1_ENABLE | KL1_EIDE1_RESET_N | + KL1_UIDE_ENABLE); + + MACIO_BIS(KEYLARGO_FCR2, KL2_ALT_DATA_OUT); + MACIO_BIC(KEYLARGO_FCR2, KL2_IOBUS_ENABLE); + + temp = MACIO_IN32(KEYLARGO_FCR3); + if (macio->rev >= 2) { + temp |= KL3_SHUTDOWN_PLL2X; + if (sleep_mode) + temp |= KL3_SHUTDOWN_PLL_TOTAL; + } + + temp |= KL3_SHUTDOWN_PLLKW6 | KL3_SHUTDOWN_PLLKW4 | + KL3_SHUTDOWN_PLLKW35; + if (sleep_mode) + temp |= KL3_SHUTDOWN_PLLKW12; + temp &= ~(KL3_CLK66_ENABLE | KL3_CLK49_ENABLE | KL3_CLK45_ENABLE + | KL3_CLK31_ENABLE | KL3_I2S1_CLK18_ENABLE | KL3_I2S0_CLK18_ENABLE); + if (sleep_mode) + temp &= ~(KL3_TIMER_CLK18_ENABLE | KL3_VIA_CLK16_ENABLE); + MACIO_OUT32(KEYLARGO_FCR3, temp); + + /* Flush posted writes & wait a bit */ + (void)MACIO_IN32(KEYLARGO_FCR0); mdelay(1); +} + +static void pangea_shutdown(struct macio_chip *macio, int sleep_mode) +{ + u32 temp; + + MACIO_BIC(KEYLARGO_FCR0,KL0_SCCA_ENABLE | KL0_SCCB_ENABLE | + KL0_SCC_CELL_ENABLE | + KL0_USB0_CELL_ENABLE | KL0_USB1_CELL_ENABLE); + + MACIO_BIC(KEYLARGO_FCR1, + KL1_AUDIO_SEL_22MCLK | KL1_AUDIO_CLK_ENABLE_BIT | + KL1_AUDIO_CLK_OUT_ENABLE | KL1_AUDIO_CELL_ENABLE | + KL1_I2S0_CELL_ENABLE | KL1_I2S0_CLK_ENABLE_BIT | + KL1_I2S0_ENABLE | KL1_I2S1_CELL_ENABLE | + KL1_I2S1_CLK_ENABLE_BIT | KL1_I2S1_ENABLE | + KL1_UIDE_ENABLE); + if (pmac_mb.board_flags & PMAC_MB_MOBILE) + MACIO_BIC(KEYLARGO_FCR1, KL1_UIDE_RESET_N); + + MACIO_BIS(KEYLARGO_FCR2, KL2_ALT_DATA_OUT); + + temp = MACIO_IN32(KEYLARGO_FCR3); + temp |= KL3_SHUTDOWN_PLLKW6 | KL3_SHUTDOWN_PLLKW4 | + KL3_SHUTDOWN_PLLKW35; + temp &= ~(KL3_CLK49_ENABLE | KL3_CLK45_ENABLE | KL3_CLK31_ENABLE + | KL3_I2S0_CLK18_ENABLE | KL3_I2S1_CLK18_ENABLE); + if (sleep_mode) + temp &= ~(KL3_VIA_CLK16_ENABLE | KL3_TIMER_CLK18_ENABLE); + MACIO_OUT32(KEYLARGO_FCR3, temp); + + /* Flush posted writes & wait a bit */ + (void)MACIO_IN32(KEYLARGO_FCR0); mdelay(1); +} + +static void intrepid_shutdown(struct macio_chip *macio, int sleep_mode) +{ + u32 temp; + + MACIO_BIC(KEYLARGO_FCR0,KL0_SCCA_ENABLE | KL0_SCCB_ENABLE | + KL0_SCC_CELL_ENABLE); + + MACIO_BIC(KEYLARGO_FCR1, + KL1_I2S0_CELL_ENABLE | KL1_I2S0_CLK_ENABLE_BIT | + KL1_I2S0_ENABLE | KL1_I2S1_CELL_ENABLE | + KL1_I2S1_CLK_ENABLE_BIT | KL1_I2S1_ENABLE | + KL1_EIDE0_ENABLE); + if (pmac_mb.board_flags & PMAC_MB_MOBILE) + MACIO_BIC(KEYLARGO_FCR1, KL1_UIDE_RESET_N); + + temp = MACIO_IN32(KEYLARGO_FCR3); + temp &= ~(KL3_CLK49_ENABLE | KL3_CLK45_ENABLE | + KL3_I2S1_CLK18_ENABLE | KL3_I2S0_CLK18_ENABLE); + if (sleep_mode) + temp &= ~(KL3_TIMER_CLK18_ENABLE | KL3_IT_VIA_CLK32_ENABLE); + MACIO_OUT32(KEYLARGO_FCR3, temp); + + /* Flush posted writes & wait a bit */ + (void)MACIO_IN32(KEYLARGO_FCR0); + mdelay(10); +} + + +static int +core99_sleep(void) +{ + struct macio_chip *macio; + int i; + + macio = &macio_chips[0]; + if (macio->type != macio_keylargo && macio->type != macio_pangea && + macio->type != macio_intrepid) + return -ENODEV; + + /* We power off the wireless slot in case it was not done + * by the driver. We don't power it on automatically however + */ + if (macio->flags & MACIO_FLAG_AIRPORT_ON) + core99_airport_enable(macio->of_node, 0, 0); + + /* We power off the FW cable. Should be done by the driver... */ + if (macio->flags & MACIO_FLAG_FW_SUPPORTED) { + core99_firewire_enable(NULL, 0, 0); + core99_firewire_cable_power(NULL, 0, 0); + } + + /* We make sure int. modem is off (in case driver lost it) */ + if (macio->type == macio_keylargo) + core99_modem_enable(macio->of_node, 0, 0); + else + pangea_modem_enable(macio->of_node, 0, 0); + + /* We make sure the sound is off as well */ + core99_sound_chip_enable(macio->of_node, 0, 0); + + /* + * Save various bits of KeyLargo + */ + + /* Save the state of the various GPIOs */ + save_gpio_levels[0] = MACIO_IN32(KEYLARGO_GPIO_LEVELS0); + save_gpio_levels[1] = MACIO_IN32(KEYLARGO_GPIO_LEVELS1); + for (i=0; i<KEYLARGO_GPIO_EXTINT_CNT; i++) + save_gpio_extint[i] = MACIO_IN8(KEYLARGO_GPIO_EXTINT_0+i); + for (i=0; i<KEYLARGO_GPIO_CNT; i++) + save_gpio_normal[i] = MACIO_IN8(KEYLARGO_GPIO_0+i); + + /* Save the FCRs */ + if (macio->type == macio_keylargo) + save_mbcr = MACIO_IN32(KEYLARGO_MBCR); + save_fcr[0] = MACIO_IN32(KEYLARGO_FCR0); + save_fcr[1] = MACIO_IN32(KEYLARGO_FCR1); + save_fcr[2] = MACIO_IN32(KEYLARGO_FCR2); + save_fcr[3] = MACIO_IN32(KEYLARGO_FCR3); + save_fcr[4] = MACIO_IN32(KEYLARGO_FCR4); + if (macio->type == macio_pangea || macio->type == macio_intrepid) + save_fcr[5] = MACIO_IN32(KEYLARGO_FCR5); + + /* Save state & config of DBDMA channels */ + dbdma_save(macio, save_dbdma); + + /* + * Turn off as much as we can + */ + if (macio->type == macio_pangea) + pangea_shutdown(macio, 1); + else if (macio->type == macio_intrepid) + intrepid_shutdown(macio, 1); + else if (macio->type == macio_keylargo) + keylargo_shutdown(macio, 1); + + /* + * Put the host bridge to sleep + */ + + save_unin_clock_ctl = UN_IN(UNI_N_CLOCK_CNTL); + /* Note: do not switch GMAC off, driver does it when necessary, WOL must keep it + * enabled ! + */ + UN_OUT(UNI_N_CLOCK_CNTL, save_unin_clock_ctl & + ~(/*UNI_N_CLOCK_CNTL_GMAC|*/UNI_N_CLOCK_CNTL_FW/*|UNI_N_CLOCK_CNTL_PCI*/)); + udelay(100); + UN_OUT(UNI_N_HWINIT_STATE, UNI_N_HWINIT_STATE_SLEEPING); + UN_OUT(UNI_N_POWER_MGT, UNI_N_POWER_MGT_SLEEP); + mdelay(10); + + /* + * FIXME: A bit of black magic with OpenPIC (don't ask me why) + */ + if (pmac_mb.model_id == PMAC_TYPE_SAWTOOTH) { + MACIO_BIS(0x506e0, 0x00400000); + MACIO_BIS(0x506e0, 0x80000000); + } + return 0; +} + +static int +core99_wake_up(void) +{ + struct macio_chip *macio; + int i; + + macio = &macio_chips[0]; + if (macio->type != macio_keylargo && macio->type != macio_pangea && + macio->type != macio_intrepid) + return -ENODEV; + + /* + * Wakeup the host bridge + */ + UN_OUT(UNI_N_POWER_MGT, UNI_N_POWER_MGT_NORMAL); + udelay(10); + UN_OUT(UNI_N_HWINIT_STATE, UNI_N_HWINIT_STATE_RUNNING); + udelay(10); + + /* + * Restore KeyLargo + */ + + if (macio->type == macio_keylargo) { + MACIO_OUT32(KEYLARGO_MBCR, save_mbcr); + (void)MACIO_IN32(KEYLARGO_MBCR); udelay(10); + } + MACIO_OUT32(KEYLARGO_FCR0, save_fcr[0]); + (void)MACIO_IN32(KEYLARGO_FCR0); udelay(10); + MACIO_OUT32(KEYLARGO_FCR1, save_fcr[1]); + (void)MACIO_IN32(KEYLARGO_FCR1); udelay(10); + MACIO_OUT32(KEYLARGO_FCR2, save_fcr[2]); + (void)MACIO_IN32(KEYLARGO_FCR2); udelay(10); + MACIO_OUT32(KEYLARGO_FCR3, save_fcr[3]); + (void)MACIO_IN32(KEYLARGO_FCR3); udelay(10); + MACIO_OUT32(KEYLARGO_FCR4, save_fcr[4]); + (void)MACIO_IN32(KEYLARGO_FCR4); udelay(10); + if (macio->type == macio_pangea || macio->type == macio_intrepid) { + MACIO_OUT32(KEYLARGO_FCR5, save_fcr[5]); + (void)MACIO_IN32(KEYLARGO_FCR5); udelay(10); + } + + dbdma_restore(macio, save_dbdma); + + MACIO_OUT32(KEYLARGO_GPIO_LEVELS0, save_gpio_levels[0]); + MACIO_OUT32(KEYLARGO_GPIO_LEVELS1, save_gpio_levels[1]); + for (i=0; i<KEYLARGO_GPIO_EXTINT_CNT; i++) + MACIO_OUT8(KEYLARGO_GPIO_EXTINT_0+i, save_gpio_extint[i]); + for (i=0; i<KEYLARGO_GPIO_CNT; i++) + MACIO_OUT8(KEYLARGO_GPIO_0+i, save_gpio_normal[i]); + + /* FIXME more black magic with OpenPIC ... */ + if (pmac_mb.model_id == PMAC_TYPE_SAWTOOTH) { + MACIO_BIC(0x506e0, 0x00400000); + MACIO_BIC(0x506e0, 0x80000000); + } + + UN_OUT(UNI_N_CLOCK_CNTL, save_unin_clock_ctl); + udelay(100); + + return 0; +} + +#endif /* CONFIG_PM */ + +static long +core99_sleep_state(struct device_node *node, long param, long value) +{ + /* Param == 1 means to enter the "fake sleep" mode that is + * used for CPU speed switch + */ + if (param == 1) { + if (value == 1) { + UN_OUT(UNI_N_HWINIT_STATE, UNI_N_HWINIT_STATE_SLEEPING); + UN_OUT(UNI_N_POWER_MGT, UNI_N_POWER_MGT_IDLE2); + } else { + UN_OUT(UNI_N_POWER_MGT, UNI_N_POWER_MGT_NORMAL); + udelay(10); + UN_OUT(UNI_N_HWINIT_STATE, UNI_N_HWINIT_STATE_RUNNING); + udelay(10); + } + return 0; + } + if ((pmac_mb.board_flags & PMAC_MB_CAN_SLEEP) == 0) + return -EPERM; + +#ifdef CONFIG_PM + if (value == 1) + return core99_sleep(); + else if (value == 0) + return core99_wake_up(); + +#endif /* CONFIG_PM */ + return 0; +} + +#endif /* CONFIG_PPC64 */ + +static long +generic_dev_can_wake(struct device_node *node, long param, long value) +{ + /* Todo: eventually check we are really dealing with on-board + * video device ... + */ + + if (pmac_mb.board_flags & PMAC_MB_MAY_SLEEP) + pmac_mb.board_flags |= PMAC_MB_CAN_SLEEP; + return 0; +} + +static long generic_get_mb_info(struct device_node *node, long param, long value) +{ + switch(param) { + case PMAC_MB_INFO_MODEL: + return pmac_mb.model_id; + case PMAC_MB_INFO_FLAGS: + return pmac_mb.board_flags; + case PMAC_MB_INFO_NAME: + /* hack hack hack... but should work */ + *((const char **)value) = pmac_mb.model_name; + return 0; + } + return -EINVAL; +} + + +/* + * Table definitions + */ + +/* Used on any machine + */ +static struct feature_table_entry any_features[] = { + { PMAC_FTR_GET_MB_INFO, generic_get_mb_info }, + { PMAC_FTR_DEVICE_CAN_WAKE, generic_dev_can_wake }, + { 0, NULL } +}; + +#ifndef CONFIG_PPC64 + +/* OHare based motherboards. Currently, we only use these on the + * 2400,3400 and 3500 series powerbooks. Some older desktops seem + * to have issues with turning on/off those asic cells + */ +static struct feature_table_entry ohare_features[] = { + { PMAC_FTR_SCC_ENABLE, ohare_htw_scc_enable }, + { PMAC_FTR_SWIM3_ENABLE, ohare_floppy_enable }, + { PMAC_FTR_MESH_ENABLE, ohare_mesh_enable }, + { PMAC_FTR_IDE_ENABLE, ohare_ide_enable}, + { PMAC_FTR_IDE_RESET, ohare_ide_reset}, + { PMAC_FTR_SLEEP_STATE, ohare_sleep_state }, + { 0, NULL } +}; + +/* Heathrow desktop machines (Beige G3). + * Separated as some features couldn't be properly tested + * and the serial port control bits appear to confuse it. + */ +static struct feature_table_entry heathrow_desktop_features[] = { + { PMAC_FTR_SWIM3_ENABLE, heathrow_floppy_enable }, + { PMAC_FTR_MESH_ENABLE, heathrow_mesh_enable }, + { PMAC_FTR_IDE_ENABLE, heathrow_ide_enable }, + { PMAC_FTR_IDE_RESET, heathrow_ide_reset }, + { PMAC_FTR_BMAC_ENABLE, heathrow_bmac_enable }, + { 0, NULL } +}; + +/* Heathrow based laptop, that is the Wallstreet and mainstreet + * powerbooks. + */ +static struct feature_table_entry heathrow_laptop_features[] = { + { PMAC_FTR_SCC_ENABLE, ohare_htw_scc_enable }, + { PMAC_FTR_MODEM_ENABLE, heathrow_modem_enable }, + { PMAC_FTR_SWIM3_ENABLE, heathrow_floppy_enable }, + { PMAC_FTR_MESH_ENABLE, heathrow_mesh_enable }, + { PMAC_FTR_IDE_ENABLE, heathrow_ide_enable }, + { PMAC_FTR_IDE_RESET, heathrow_ide_reset }, + { PMAC_FTR_BMAC_ENABLE, heathrow_bmac_enable }, + { PMAC_FTR_SOUND_CHIP_ENABLE, heathrow_sound_enable }, + { PMAC_FTR_SLEEP_STATE, heathrow_sleep_state }, + { 0, NULL } +}; + +/* Paddington based machines + * The lombard (101) powerbook, first iMac models, B&W G3 and Yikes G4. + */ +static struct feature_table_entry paddington_features[] = { + { PMAC_FTR_SCC_ENABLE, ohare_htw_scc_enable }, + { PMAC_FTR_MODEM_ENABLE, heathrow_modem_enable }, + { PMAC_FTR_SWIM3_ENABLE, heathrow_floppy_enable }, + { PMAC_FTR_MESH_ENABLE, heathrow_mesh_enable }, + { PMAC_FTR_IDE_ENABLE, heathrow_ide_enable }, + { PMAC_FTR_IDE_RESET, heathrow_ide_reset }, + { PMAC_FTR_BMAC_ENABLE, heathrow_bmac_enable }, + { PMAC_FTR_SOUND_CHIP_ENABLE, heathrow_sound_enable }, + { PMAC_FTR_SLEEP_STATE, heathrow_sleep_state }, + { 0, NULL } +}; + +/* Core99 & MacRISC 2 machines (all machines released since the + * iBook (included), that is all AGP machines, except pangea + * chipset. The pangea chipset is the "combo" UniNorth/KeyLargo + * used on iBook2 & iMac "flow power". + */ +static struct feature_table_entry core99_features[] = { + { PMAC_FTR_SCC_ENABLE, core99_scc_enable }, + { PMAC_FTR_MODEM_ENABLE, core99_modem_enable }, + { PMAC_FTR_IDE_ENABLE, core99_ide_enable }, + { PMAC_FTR_IDE_RESET, core99_ide_reset }, + { PMAC_FTR_GMAC_ENABLE, core99_gmac_enable }, + { PMAC_FTR_GMAC_PHY_RESET, core99_gmac_phy_reset }, + { PMAC_FTR_SOUND_CHIP_ENABLE, core99_sound_chip_enable }, + { PMAC_FTR_AIRPORT_ENABLE, core99_airport_enable }, + { PMAC_FTR_USB_ENABLE, core99_usb_enable }, + { PMAC_FTR_1394_ENABLE, core99_firewire_enable }, + { PMAC_FTR_1394_CABLE_POWER, core99_firewire_cable_power }, +#ifdef CONFIG_PM + { PMAC_FTR_SLEEP_STATE, core99_sleep_state }, +#endif +#ifdef CONFIG_SMP + { PMAC_FTR_RESET_CPU, core99_reset_cpu }, +#endif /* CONFIG_SMP */ + { PMAC_FTR_READ_GPIO, core99_read_gpio }, + { PMAC_FTR_WRITE_GPIO, core99_write_gpio }, + { 0, NULL } +}; + +/* RackMac + */ +static struct feature_table_entry rackmac_features[] = { + { PMAC_FTR_SCC_ENABLE, core99_scc_enable }, + { PMAC_FTR_IDE_ENABLE, core99_ide_enable }, + { PMAC_FTR_IDE_RESET, core99_ide_reset }, + { PMAC_FTR_GMAC_ENABLE, core99_gmac_enable }, + { PMAC_FTR_GMAC_PHY_RESET, core99_gmac_phy_reset }, + { PMAC_FTR_USB_ENABLE, core99_usb_enable }, + { PMAC_FTR_1394_ENABLE, core99_firewire_enable }, + { PMAC_FTR_1394_CABLE_POWER, core99_firewire_cable_power }, + { PMAC_FTR_SLEEP_STATE, core99_sleep_state }, +#ifdef CONFIG_SMP + { PMAC_FTR_RESET_CPU, core99_reset_cpu }, +#endif /* CONFIG_SMP */ + { PMAC_FTR_READ_GPIO, core99_read_gpio }, + { PMAC_FTR_WRITE_GPIO, core99_write_gpio }, + { 0, NULL } +}; + +/* Pangea features + */ +static struct feature_table_entry pangea_features[] = { + { PMAC_FTR_SCC_ENABLE, core99_scc_enable }, + { PMAC_FTR_MODEM_ENABLE, pangea_modem_enable }, + { PMAC_FTR_IDE_ENABLE, core99_ide_enable }, + { PMAC_FTR_IDE_RESET, core99_ide_reset }, + { PMAC_FTR_GMAC_ENABLE, core99_gmac_enable }, + { PMAC_FTR_GMAC_PHY_RESET, core99_gmac_phy_reset }, + { PMAC_FTR_SOUND_CHIP_ENABLE, core99_sound_chip_enable }, + { PMAC_FTR_AIRPORT_ENABLE, core99_airport_enable }, + { PMAC_FTR_USB_ENABLE, core99_usb_enable }, + { PMAC_FTR_1394_ENABLE, core99_firewire_enable }, + { PMAC_FTR_1394_CABLE_POWER, core99_firewire_cable_power }, + { PMAC_FTR_SLEEP_STATE, core99_sleep_state }, + { PMAC_FTR_READ_GPIO, core99_read_gpio }, + { PMAC_FTR_WRITE_GPIO, core99_write_gpio }, + { 0, NULL } +}; + +/* Intrepid features + */ +static struct feature_table_entry intrepid_features[] = { + { PMAC_FTR_SCC_ENABLE, core99_scc_enable }, + { PMAC_FTR_MODEM_ENABLE, pangea_modem_enable }, + { PMAC_FTR_IDE_ENABLE, core99_ide_enable }, + { PMAC_FTR_IDE_RESET, core99_ide_reset }, + { PMAC_FTR_GMAC_ENABLE, core99_gmac_enable }, + { PMAC_FTR_GMAC_PHY_RESET, core99_gmac_phy_reset }, + { PMAC_FTR_SOUND_CHIP_ENABLE, core99_sound_chip_enable }, + { PMAC_FTR_AIRPORT_ENABLE, core99_airport_enable }, + { PMAC_FTR_USB_ENABLE, core99_usb_enable }, + { PMAC_FTR_1394_ENABLE, core99_firewire_enable }, + { PMAC_FTR_1394_CABLE_POWER, core99_firewire_cable_power }, + { PMAC_FTR_SLEEP_STATE, core99_sleep_state }, + { PMAC_FTR_READ_GPIO, core99_read_gpio }, + { PMAC_FTR_WRITE_GPIO, core99_write_gpio }, + { PMAC_FTR_AACK_DELAY_ENABLE, intrepid_aack_delay_enable }, + { 0, NULL } +}; + +#else /* CONFIG_PPC64 */ + +/* G5 features + */ +static struct feature_table_entry g5_features[] = { + { PMAC_FTR_GMAC_ENABLE, g5_gmac_enable }, + { PMAC_FTR_1394_ENABLE, g5_fw_enable }, + { PMAC_FTR_ENABLE_MPIC, g5_mpic_enable }, + { PMAC_FTR_GMAC_PHY_RESET, g5_eth_phy_reset }, + { PMAC_FTR_SOUND_CHIP_ENABLE, g5_i2s_enable }, +#ifdef CONFIG_SMP + { PMAC_FTR_RESET_CPU, g5_reset_cpu }, +#endif /* CONFIG_SMP */ + { PMAC_FTR_READ_GPIO, core99_read_gpio }, + { PMAC_FTR_WRITE_GPIO, core99_write_gpio }, + { 0, NULL } +}; + +#endif /* CONFIG_PPC64 */ + +static struct pmac_mb_def pmac_mb_defs[] = { +#ifndef CONFIG_PPC64 + /* + * Desktops + */ + + { "AAPL,8500", "PowerMac 8500/8600", + PMAC_TYPE_PSURGE, NULL, + 0 + }, + { "AAPL,9500", "PowerMac 9500/9600", + PMAC_TYPE_PSURGE, NULL, + 0 + }, + { "AAPL,7200", "PowerMac 7200", + PMAC_TYPE_PSURGE, NULL, + 0 + }, + { "AAPL,7300", "PowerMac 7200/7300", + PMAC_TYPE_PSURGE, NULL, + 0 + }, + { "AAPL,7500", "PowerMac 7500", + PMAC_TYPE_PSURGE, NULL, + 0 + }, + { "AAPL,ShinerESB", "Apple Network Server", + PMAC_TYPE_ANS, NULL, + 0 + }, + { "AAPL,e407", "Alchemy", + PMAC_TYPE_ALCHEMY, NULL, + 0 + }, + { "AAPL,e411", "Gazelle", + PMAC_TYPE_GAZELLE, NULL, + 0 + }, + { "AAPL,Gossamer", "PowerMac G3 (Gossamer)", + PMAC_TYPE_GOSSAMER, heathrow_desktop_features, + 0 + }, + { "AAPL,PowerMac G3", "PowerMac G3 (Silk)", + PMAC_TYPE_SILK, heathrow_desktop_features, + 0 + }, + { "PowerMac1,1", "Blue&White G3", + PMAC_TYPE_YOSEMITE, paddington_features, + 0 + }, + { "PowerMac1,2", "PowerMac G4 PCI Graphics", + PMAC_TYPE_YIKES, paddington_features, + 0 + }, + { "PowerMac2,1", "iMac FireWire", + PMAC_TYPE_FW_IMAC, core99_features, + PMAC_MB_MAY_SLEEP | PMAC_MB_OLD_CORE99 + }, + { "PowerMac2,2", "iMac FireWire", + PMAC_TYPE_FW_IMAC, core99_features, + PMAC_MB_MAY_SLEEP | PMAC_MB_OLD_CORE99 + }, + { "PowerMac3,1", "PowerMac G4 AGP Graphics", + PMAC_TYPE_SAWTOOTH, core99_features, + PMAC_MB_OLD_CORE99 + }, + { "PowerMac3,2", "PowerMac G4 AGP Graphics", + PMAC_TYPE_SAWTOOTH, core99_features, + PMAC_MB_MAY_SLEEP | PMAC_MB_OLD_CORE99 + }, + { "PowerMac3,3", "PowerMac G4 AGP Graphics", + PMAC_TYPE_SAWTOOTH, core99_features, + PMAC_MB_MAY_SLEEP | PMAC_MB_OLD_CORE99 + }, + { "PowerMac3,4", "PowerMac G4 Silver", + PMAC_TYPE_QUICKSILVER, core99_features, + PMAC_MB_MAY_SLEEP + }, + { "PowerMac3,5", "PowerMac G4 Silver", + PMAC_TYPE_QUICKSILVER, core99_features, + PMAC_MB_MAY_SLEEP + }, + { "PowerMac3,6", "PowerMac G4 Windtunnel", + PMAC_TYPE_WINDTUNNEL, core99_features, + PMAC_MB_MAY_SLEEP, + }, + { "PowerMac4,1", "iMac \"Flower Power\"", + PMAC_TYPE_PANGEA_IMAC, pangea_features, + PMAC_MB_MAY_SLEEP + }, + { "PowerMac4,2", "Flat panel iMac", + PMAC_TYPE_FLAT_PANEL_IMAC, pangea_features, + PMAC_MB_CAN_SLEEP + }, + { "PowerMac4,4", "eMac", + PMAC_TYPE_EMAC, core99_features, + PMAC_MB_MAY_SLEEP + }, + { "PowerMac5,1", "PowerMac G4 Cube", + PMAC_TYPE_CUBE, core99_features, + PMAC_MB_MAY_SLEEP | PMAC_MB_OLD_CORE99 + }, + { "PowerMac6,1", "Flat panel iMac", + PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features, + PMAC_MB_MAY_SLEEP, + }, + { "PowerMac6,3", "Flat panel iMac", + PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features, + PMAC_MB_MAY_SLEEP, + }, + { "PowerMac6,4", "eMac", + PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features, + PMAC_MB_MAY_SLEEP, + }, + { "PowerMac10,1", "Mac mini", + PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features, + PMAC_MB_MAY_SLEEP, + }, + { "PowerMac10,2", "Mac mini (Late 2005)", + PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features, + PMAC_MB_MAY_SLEEP, + }, + { "iMac,1", "iMac (first generation)", + PMAC_TYPE_ORIG_IMAC, paddington_features, + 0 + }, + + /* + * Xserve's + */ + + { "RackMac1,1", "XServe", + PMAC_TYPE_RACKMAC, rackmac_features, + 0, + }, + { "RackMac1,2", "XServe rev. 2", + PMAC_TYPE_RACKMAC, rackmac_features, + 0, + }, + + /* + * Laptops + */ + + { "AAPL,3400/2400", "PowerBook 3400", + PMAC_TYPE_HOOPER, ohare_features, + PMAC_MB_CAN_SLEEP | PMAC_MB_MOBILE + }, + { "AAPL,3500", "PowerBook 3500", + PMAC_TYPE_KANGA, ohare_features, + PMAC_MB_CAN_SLEEP | PMAC_MB_MOBILE + }, + { "AAPL,PowerBook1998", "PowerBook Wallstreet", + PMAC_TYPE_WALLSTREET, heathrow_laptop_features, + PMAC_MB_CAN_SLEEP | PMAC_MB_MOBILE + }, + { "PowerBook1,1", "PowerBook 101 (Lombard)", + PMAC_TYPE_101_PBOOK, paddington_features, + PMAC_MB_CAN_SLEEP | PMAC_MB_MOBILE + }, + { "PowerBook2,1", "iBook (first generation)", + PMAC_TYPE_ORIG_IBOOK, core99_features, + PMAC_MB_CAN_SLEEP | PMAC_MB_OLD_CORE99 | PMAC_MB_MOBILE + }, + { "PowerBook2,2", "iBook FireWire", + PMAC_TYPE_FW_IBOOK, core99_features, + PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | + PMAC_MB_OLD_CORE99 | PMAC_MB_MOBILE + }, + { "PowerBook3,1", "PowerBook Pismo", + PMAC_TYPE_PISMO, core99_features, + PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | + PMAC_MB_OLD_CORE99 | PMAC_MB_MOBILE + }, + { "PowerBook3,2", "PowerBook Titanium", + PMAC_TYPE_TITANIUM, core99_features, + PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE + }, + { "PowerBook3,3", "PowerBook Titanium II", + PMAC_TYPE_TITANIUM2, core99_features, + PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE + }, + { "PowerBook3,4", "PowerBook Titanium III", + PMAC_TYPE_TITANIUM3, core99_features, + PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE + }, + { "PowerBook3,5", "PowerBook Titanium IV", + PMAC_TYPE_TITANIUM4, core99_features, + PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE + }, + { "PowerBook4,1", "iBook 2", + PMAC_TYPE_IBOOK2, pangea_features, + PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE + }, + { "PowerBook4,2", "iBook 2", + PMAC_TYPE_IBOOK2, pangea_features, + PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE + }, + { "PowerBook4,3", "iBook 2 rev. 2", + PMAC_TYPE_IBOOK2, pangea_features, + PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE + }, + { "PowerBook5,1", "PowerBook G4 17\"", + PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features, + PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE, + }, + { "PowerBook5,2", "PowerBook G4 15\"", + PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features, + PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE, + }, + { "PowerBook5,3", "PowerBook G4 17\"", + PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features, + PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE, + }, + { "PowerBook5,4", "PowerBook G4 15\"", + PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features, + PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE, + }, + { "PowerBook5,5", "PowerBook G4 17\"", + PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features, + PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE, + }, + { "PowerBook5,6", "PowerBook G4 15\"", + PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features, + PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE, + }, + { "PowerBook5,7", "PowerBook G4 17\"", + PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features, + PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE, + }, + { "PowerBook5,8", "PowerBook G4 15\"", + PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features, + PMAC_MB_MAY_SLEEP | PMAC_MB_MOBILE, + }, + { "PowerBook5,9", "PowerBook G4 17\"", + PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features, + PMAC_MB_MAY_SLEEP | PMAC_MB_MOBILE, + }, + { "PowerBook6,1", "PowerBook G4 12\"", + PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features, + PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE, + }, + { "PowerBook6,2", "PowerBook G4", + PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features, + PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE, + }, + { "PowerBook6,3", "iBook G4", + PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features, + PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE, + }, + { "PowerBook6,4", "PowerBook G4 12\"", + PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features, + PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE, + }, + { "PowerBook6,5", "iBook G4", + PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features, + PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE, + }, + { "PowerBook6,7", "iBook G4", + PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features, + PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE, + }, + { "PowerBook6,8", "PowerBook G4 12\"", + PMAC_TYPE_UNKNOWN_INTREPID, intrepid_features, + PMAC_MB_MAY_SLEEP | PMAC_MB_HAS_FW_POWER | PMAC_MB_MOBILE, + }, +#else /* CONFIG_PPC64 */ + { "PowerMac7,2", "PowerMac G5", + PMAC_TYPE_POWERMAC_G5, g5_features, + 0, + }, +#ifdef CONFIG_PPC64 + { "PowerMac7,3", "PowerMac G5", + PMAC_TYPE_POWERMAC_G5, g5_features, + 0, + }, + { "PowerMac8,1", "iMac G5", + PMAC_TYPE_IMAC_G5, g5_features, + 0, + }, + { "PowerMac9,1", "PowerMac G5", + PMAC_TYPE_POWERMAC_G5_U3L, g5_features, + 0, + }, + { "PowerMac11,2", "PowerMac G5 Dual Core", + PMAC_TYPE_POWERMAC_G5_U3L, g5_features, + 0, + }, + { "PowerMac12,1", "iMac G5 (iSight)", + PMAC_TYPE_POWERMAC_G5_U3L, g5_features, + 0, + }, + { "RackMac3,1", "XServe G5", + PMAC_TYPE_XSERVE_G5, g5_features, + 0, + }, +#endif /* CONFIG_PPC64 */ +#endif /* CONFIG_PPC64 */ +}; + +/* + * The toplevel feature_call callback + */ +long pmac_do_feature_call(unsigned int selector, ...) +{ + struct device_node *node; + long param, value; + int i; + feature_call func = NULL; + va_list args; + + if (pmac_mb.features) + for (i=0; pmac_mb.features[i].function; i++) + if (pmac_mb.features[i].selector == selector) { + func = pmac_mb.features[i].function; + break; + } + if (!func) + for (i=0; any_features[i].function; i++) + if (any_features[i].selector == selector) { + func = any_features[i].function; + break; + } + if (!func) + return -ENODEV; + + va_start(args, selector); + node = (struct device_node*)va_arg(args, void*); + param = va_arg(args, long); + value = va_arg(args, long); + va_end(args); + + return func(node, param, value); +} + +static int __init probe_motherboard(void) +{ + int i; + struct macio_chip *macio = &macio_chips[0]; + const char *model = NULL; + struct device_node *dt; + int ret = 0; + + /* Lookup known motherboard type in device-tree. First try an + * exact match on the "model" property, then try a "compatible" + * match is none is found. + */ + dt = of_find_node_by_name(NULL, "device-tree"); + if (dt != NULL) + model = of_get_property(dt, "model", NULL); + for(i=0; model && i<ARRAY_SIZE(pmac_mb_defs); i++) { + if (strcmp(model, pmac_mb_defs[i].model_string) == 0) { + pmac_mb = pmac_mb_defs[i]; + goto found; + } + } + for(i=0; i<ARRAY_SIZE(pmac_mb_defs); i++) { + if (of_machine_is_compatible(pmac_mb_defs[i].model_string)) { + pmac_mb = pmac_mb_defs[i]; + goto found; + } + } + + /* Fallback to selection depending on mac-io chip type */ + switch(macio->type) { +#ifndef CONFIG_PPC64 + case macio_grand_central: + pmac_mb.model_id = PMAC_TYPE_PSURGE; + pmac_mb.model_name = "Unknown PowerSurge"; + break; + case macio_ohare: + pmac_mb.model_id = PMAC_TYPE_UNKNOWN_OHARE; + pmac_mb.model_name = "Unknown OHare-based"; + break; + case macio_heathrow: + pmac_mb.model_id = PMAC_TYPE_UNKNOWN_HEATHROW; + pmac_mb.model_name = "Unknown Heathrow-based"; + pmac_mb.features = heathrow_desktop_features; + break; + case macio_paddington: + pmac_mb.model_id = PMAC_TYPE_UNKNOWN_PADDINGTON; + pmac_mb.model_name = "Unknown Paddington-based"; + pmac_mb.features = paddington_features; + break; + case macio_keylargo: + pmac_mb.model_id = PMAC_TYPE_UNKNOWN_CORE99; + pmac_mb.model_name = "Unknown Keylargo-based"; + pmac_mb.features = core99_features; + break; + case macio_pangea: + pmac_mb.model_id = PMAC_TYPE_UNKNOWN_PANGEA; + pmac_mb.model_name = "Unknown Pangea-based"; + pmac_mb.features = pangea_features; + break; + case macio_intrepid: + pmac_mb.model_id = PMAC_TYPE_UNKNOWN_INTREPID; + pmac_mb.model_name = "Unknown Intrepid-based"; + pmac_mb.features = intrepid_features; + break; +#else /* CONFIG_PPC64 */ + case macio_keylargo2: + pmac_mb.model_id = PMAC_TYPE_UNKNOWN_K2; + pmac_mb.model_name = "Unknown K2-based"; + pmac_mb.features = g5_features; + break; + case macio_shasta: + pmac_mb.model_id = PMAC_TYPE_UNKNOWN_SHASTA; + pmac_mb.model_name = "Unknown Shasta-based"; + pmac_mb.features = g5_features; + break; +#endif /* CONFIG_PPC64 */ + default: + ret = -ENODEV; + goto done; + } +found: +#ifndef CONFIG_PPC64 + /* Fixup Hooper vs. Comet */ + if (pmac_mb.model_id == PMAC_TYPE_HOOPER) { + u32 __iomem * mach_id_ptr = ioremap(0xf3000034, 4); + if (!mach_id_ptr) { + ret = -ENODEV; + goto done; + } + /* Here, I used to disable the media-bay on comet. It + * appears this is wrong, the floppy connector is actually + * a kind of media-bay and works with the current driver. + */ + if (__raw_readl(mach_id_ptr) & 0x20000000UL) + pmac_mb.model_id = PMAC_TYPE_COMET; + iounmap(mach_id_ptr); + } + + /* Set default value of powersave_nap on machines that support it. + * It appears that uninorth rev 3 has a problem with it, we don't + * enable it on those. In theory, the flush-on-lock property is + * supposed to be set when not supported, but I'm not very confident + * that all Apple OF revs did it properly, I do it the paranoid way. + */ + if (uninorth_base && uninorth_rev > 3) { + struct device_node *np; + + for_each_of_cpu_node(np) { + int cpu_count = 1; + + /* Nap mode not supported on SMP */ + if (of_get_property(np, "flush-on-lock", NULL) || + (cpu_count > 1)) { + powersave_nap = 0; + of_node_put(np); + break; + } + + cpu_count++; + powersave_nap = 1; + } + } + if (powersave_nap) + printk(KERN_DEBUG "Processor NAP mode on idle enabled.\n"); + + /* On CPUs that support it (750FX), lowspeed by default during + * NAP mode + */ + powersave_lowspeed = 1; + +#else /* CONFIG_PPC64 */ + powersave_nap = 1; +#endif /* CONFIG_PPC64 */ + + /* Check for "mobile" machine */ + if (model && (strncmp(model, "PowerBook", 9) == 0 + || strncmp(model, "iBook", 5) == 0)) + pmac_mb.board_flags |= PMAC_MB_MOBILE; + + + printk(KERN_INFO "PowerMac motherboard: %s\n", pmac_mb.model_name); +done: + of_node_put(dt); + return ret; +} + +/* Initialize the Core99 UniNorth host bridge and memory controller + */ +static void __init probe_uninorth(void) +{ + const u32 *addrp; + phys_addr_t address; + unsigned long actrl; + + /* Locate core99 Uni-N */ + uninorth_node = of_find_node_by_name(NULL, "uni-n"); + uninorth_maj = 1; + + /* Locate G5 u3 */ + if (uninorth_node == NULL) { + uninorth_node = of_find_node_by_name(NULL, "u3"); + uninorth_maj = 3; + } + /* Locate G5 u4 */ + if (uninorth_node == NULL) { + uninorth_node = of_find_node_by_name(NULL, "u4"); + uninorth_maj = 4; + } + if (uninorth_node == NULL) { + uninorth_maj = 0; + return; + } + + addrp = of_get_property(uninorth_node, "reg", NULL); + if (addrp == NULL) + return; + address = of_translate_address(uninorth_node, addrp); + if (address == 0) + return; + uninorth_base = ioremap(address, 0x40000); + if (uninorth_base == NULL) + return; + uninorth_rev = in_be32(UN_REG(UNI_N_VERSION)); + if (uninorth_maj == 3 || uninorth_maj == 4) { + u3_ht_base = ioremap(address + U3_HT_CONFIG_BASE, 0x1000); + if (u3_ht_base == NULL) { + iounmap(uninorth_base); + return; + } + } + + printk(KERN_INFO "Found %s memory controller & host bridge" + " @ 0x%08x revision: 0x%02x\n", uninorth_maj == 3 ? "U3" : + uninorth_maj == 4 ? "U4" : "UniNorth", + (unsigned int)address, uninorth_rev); + printk(KERN_INFO "Mapped at 0x%08lx\n", (unsigned long)uninorth_base); + + /* Set the arbitrer QAck delay according to what Apple does + */ + if (uninorth_rev < 0x11) { + actrl = UN_IN(UNI_N_ARB_CTRL) & ~UNI_N_ARB_CTRL_QACK_DELAY_MASK; + actrl |= ((uninorth_rev < 3) ? UNI_N_ARB_CTRL_QACK_DELAY105 : + UNI_N_ARB_CTRL_QACK_DELAY) << + UNI_N_ARB_CTRL_QACK_DELAY_SHIFT; + UN_OUT(UNI_N_ARB_CTRL, actrl); + } + + /* Some more magic as done by them in recent MacOS X on UniNorth + * revs 1.5 to 2.O and Pangea. Seem to toggle the UniN Maxbus/PCI + * memory timeout + */ + if ((uninorth_rev >= 0x11 && uninorth_rev <= 0x24) || + uninorth_rev == 0xc0) + UN_OUT(0x2160, UN_IN(0x2160) & 0x00ffffff); +} + +static void __init probe_one_macio(const char *name, const char *compat, int type) +{ + struct device_node* node; + int i; + volatile u32 __iomem *base; + const u32 *addrp, *revp; + phys_addr_t addr; + u64 size; + + for_each_node_by_name(node, name) { + if (!compat) + break; + if (of_device_is_compatible(node, compat)) + break; + } + if (!node) + return; + for(i=0; i<MAX_MACIO_CHIPS; i++) { + if (!macio_chips[i].of_node) + break; + if (macio_chips[i].of_node == node) + goto out_put; + } + + if (i >= MAX_MACIO_CHIPS) { + printk(KERN_ERR "pmac_feature: Please increase MAX_MACIO_CHIPS !\n"); + printk(KERN_ERR "pmac_feature: %pOF skipped\n", node); + goto out_put; + } + addrp = of_get_pci_address(node, 0, &size, NULL); + if (addrp == NULL) { + printk(KERN_ERR "pmac_feature: %pOF: can't find base !\n", + node); + goto out_put; + } + addr = of_translate_address(node, addrp); + if (addr == 0) { + printk(KERN_ERR "pmac_feature: %pOF, can't translate base !\n", + node); + goto out_put; + } + base = ioremap(addr, (unsigned long)size); + if (!base) { + printk(KERN_ERR "pmac_feature: %pOF, can't map mac-io chip !\n", + node); + goto out_put; + } + if (type == macio_keylargo || type == macio_keylargo2) { + const u32 *did = of_get_property(node, "device-id", NULL); + if (*did == 0x00000025) + type = macio_pangea; + if (*did == 0x0000003e) + type = macio_intrepid; + if (*did == 0x0000004f) + type = macio_shasta; + } + macio_chips[i].of_node = node; + macio_chips[i].type = type; + macio_chips[i].base = base; + macio_chips[i].flags = MACIO_FLAG_SCCA_ON | MACIO_FLAG_SCCB_ON; + macio_chips[i].name = macio_names[type]; + revp = of_get_property(node, "revision-id", NULL); + if (revp) + macio_chips[i].rev = *revp; + printk(KERN_INFO "Found a %s mac-io controller, rev: %d, mapped at 0x%p\n", + macio_names[type], macio_chips[i].rev, macio_chips[i].base); + + return; + +out_put: + of_node_put(node); +} + +static int __init +probe_macios(void) +{ + /* Warning, ordering is important */ + probe_one_macio("gc", NULL, macio_grand_central); + probe_one_macio("ohare", NULL, macio_ohare); + probe_one_macio("pci106b,7", NULL, macio_ohareII); + probe_one_macio("mac-io", "keylargo", macio_keylargo); + probe_one_macio("mac-io", "paddington", macio_paddington); + probe_one_macio("mac-io", "gatwick", macio_gatwick); + probe_one_macio("mac-io", "heathrow", macio_heathrow); + probe_one_macio("mac-io", "K2-Keylargo", macio_keylargo2); + + /* Make sure the "main" macio chip appear first */ + if (macio_chips[0].type == macio_gatwick + && macio_chips[1].type == macio_heathrow) { + struct macio_chip temp = macio_chips[0]; + macio_chips[0] = macio_chips[1]; + macio_chips[1] = temp; + } + if (macio_chips[0].type == macio_ohareII + && macio_chips[1].type == macio_ohare) { + struct macio_chip temp = macio_chips[0]; + macio_chips[0] = macio_chips[1]; + macio_chips[1] = temp; + } + macio_chips[0].lbus.index = 0; + macio_chips[1].lbus.index = 1; + + return (macio_chips[0].of_node == NULL) ? -ENODEV : 0; +} + +static void __init +initial_serial_shutdown(struct device_node *np) +{ + int len; + const struct slot_names_prop { + int count; + char name[1]; + } *slots; + const char *conn; + int port_type = PMAC_SCC_ASYNC; + int modem = 0; + + slots = of_get_property(np, "slot-names", &len); + conn = of_get_property(np, "AAPL,connector", &len); + if (conn && (strcmp(conn, "infrared") == 0)) + port_type = PMAC_SCC_IRDA; + else if (of_device_is_compatible(np, "cobalt")) + modem = 1; + else if (slots && slots->count > 0) { + if (strcmp(slots->name, "IrDA") == 0) + port_type = PMAC_SCC_IRDA; + else if (strcmp(slots->name, "Modem") == 0) + modem = 1; + } + if (modem) + pmac_call_feature(PMAC_FTR_MODEM_ENABLE, np, 0, 0); + pmac_call_feature(PMAC_FTR_SCC_ENABLE, np, port_type, 0); +} + +static void __init +set_initial_features(void) +{ + struct device_node *np; + + /* That hack appears to be necessary for some StarMax motherboards + * but I'm not too sure it was audited for side-effects on other + * ohare based machines... + * Since I still have difficulties figuring the right way to + * differentiate them all and since that hack was there for a long + * time, I'll keep it around + */ + if (macio_chips[0].type == macio_ohare) { + struct macio_chip *macio = &macio_chips[0]; + np = of_find_node_by_name(NULL, "via-pmu"); + if (np) + MACIO_BIS(OHARE_FCR, OH_IOBUS_ENABLE); + else + MACIO_OUT32(OHARE_FCR, STARMAX_FEATURES); + of_node_put(np); + } else if (macio_chips[1].type == macio_ohare) { + struct macio_chip *macio = &macio_chips[1]; + MACIO_BIS(OHARE_FCR, OH_IOBUS_ENABLE); + } + +#ifdef CONFIG_PPC64 + if (macio_chips[0].type == macio_keylargo2 || + macio_chips[0].type == macio_shasta) { +#ifndef CONFIG_SMP + /* On SMP machines running UP, we have the second CPU eating + * bus cycles. We need to take it off the bus. This is done + * from pmac_smp for SMP kernels running on one CPU + */ + np = of_find_node_by_type(NULL, "cpu"); + if (np != NULL) + np = of_find_node_by_type(np, "cpu"); + if (np != NULL) { + g5_phy_disable_cpu1(); + of_node_put(np); + } +#endif /* CONFIG_SMP */ + /* Enable GMAC for now for PCI probing. It will be disabled + * later on after PCI probe + */ + for_each_node_by_name(np, "ethernet") + if (of_device_is_compatible(np, "K2-GMAC")) + g5_gmac_enable(np, 0, 1); + + /* Enable FW before PCI probe. Will be disabled later on + * Note: We should have a batter way to check that we are + * dealing with uninorth internal cell and not a PCI cell + * on the external PCI. The code below works though. + */ + for_each_node_by_name(np, "firewire") { + if (of_device_is_compatible(np, "pci106b,5811")) { + macio_chips[0].flags |= MACIO_FLAG_FW_SUPPORTED; + g5_fw_enable(np, 0, 1); + } + } + } +#else /* CONFIG_PPC64 */ + + if (macio_chips[0].type == macio_keylargo || + macio_chips[0].type == macio_pangea || + macio_chips[0].type == macio_intrepid) { + /* Enable GMAC for now for PCI probing. It will be disabled + * later on after PCI probe + */ + for_each_node_by_name(np, "ethernet") { + if (np->parent + && of_device_is_compatible(np->parent, "uni-north") + && of_device_is_compatible(np, "gmac")) + core99_gmac_enable(np, 0, 1); + } + + /* Enable FW before PCI probe. Will be disabled later on + * Note: We should have a batter way to check that we are + * dealing with uninorth internal cell and not a PCI cell + * on the external PCI. The code below works though. + */ + for_each_node_by_name(np, "firewire") { + if (np->parent + && of_device_is_compatible(np->parent, "uni-north") + && (of_device_is_compatible(np, "pci106b,18") || + of_device_is_compatible(np, "pci106b,30") || + of_device_is_compatible(np, "pci11c1,5811"))) { + macio_chips[0].flags |= MACIO_FLAG_FW_SUPPORTED; + core99_firewire_enable(np, 0, 1); + } + } + + /* Enable ATA-100 before PCI probe. */ + for_each_node_by_name(np, "ata-6") { + if (np->parent + && of_device_is_compatible(np->parent, "uni-north") + && of_device_is_compatible(np, "kauai-ata")) { + core99_ata100_enable(np, 1); + } + } + + /* Switch airport off */ + for_each_node_by_name(np, "radio") { + if (np->parent == macio_chips[0].of_node) { + macio_chips[0].flags |= MACIO_FLAG_AIRPORT_ON; + core99_airport_enable(np, 0, 0); + } + } + } + + /* On all machines that support sound PM, switch sound off */ + if (macio_chips[0].of_node) + pmac_do_feature_call(PMAC_FTR_SOUND_CHIP_ENABLE, + macio_chips[0].of_node, 0, 0); + + /* While on some desktop G3s, we turn it back on */ + if (macio_chips[0].of_node && macio_chips[0].type == macio_heathrow + && (pmac_mb.model_id == PMAC_TYPE_GOSSAMER || + pmac_mb.model_id == PMAC_TYPE_SILK)) { + struct macio_chip *macio = &macio_chips[0]; + MACIO_BIS(HEATHROW_FCR, HRW_SOUND_CLK_ENABLE); + MACIO_BIC(HEATHROW_FCR, HRW_SOUND_POWER_N); + } + +#endif /* CONFIG_PPC64 */ + + /* On all machines, switch modem & serial ports off */ + for_each_node_by_name(np, "ch-a") + initial_serial_shutdown(np); + for_each_node_by_name(np, "ch-b") + initial_serial_shutdown(np); +} + +void __init +pmac_feature_init(void) +{ + /* Detect the UniNorth memory controller */ + probe_uninorth(); + + /* Probe mac-io controllers */ + if (probe_macios()) { + printk(KERN_WARNING "No mac-io chip found\n"); + return; + } + + /* Probe machine type */ + if (probe_motherboard()) + printk(KERN_WARNING "Unknown PowerMac !\n"); + + /* Set some initial features (turn off some chips that will + * be later turned on) + */ + set_initial_features(); +} + +#if 0 +static void dump_HT_speeds(char *name, u32 cfg, u32 frq) +{ + int freqs[16] = { 200,300,400,500,600,800,1000,0,0,0,0,0,0,0,0,0 }; + int bits[8] = { 8,16,0,32,2,4,0,0 }; + int freq = (frq >> 8) & 0xf; + + if (freqs[freq] == 0) + printk("%s: Unknown HT link frequency %x\n", name, freq); + else + printk("%s: %d MHz on main link, (%d in / %d out) bits width\n", + name, freqs[freq], + bits[(cfg >> 28) & 0x7], bits[(cfg >> 24) & 0x7]); +} + +void __init pmac_check_ht_link(void) +{ + u32 ufreq, freq, ucfg, cfg; + struct device_node *pcix_node; + u8 px_bus, px_devfn; + struct pci_controller *px_hose; + + (void)in_be32(u3_ht_base + U3_HT_LINK_COMMAND); + ucfg = cfg = in_be32(u3_ht_base + U3_HT_LINK_CONFIG); + ufreq = freq = in_be32(u3_ht_base + U3_HT_LINK_FREQ); + dump_HT_speeds("U3 HyperTransport", cfg, freq); + + pcix_node = of_find_compatible_node(NULL, "pci", "pci-x"); + if (pcix_node == NULL) { + printk("No PCI-X bridge found\n"); + return; + } + if (pci_device_from_OF_node(pcix_node, &px_bus, &px_devfn) != 0) { + printk("PCI-X bridge found but not matched to pci\n"); + return; + } + px_hose = pci_find_hose_for_OF_device(pcix_node); + if (px_hose == NULL) { + printk("PCI-X bridge found but not matched to host\n"); + return; + } + early_read_config_dword(px_hose, px_bus, px_devfn, 0xc4, &cfg); + early_read_config_dword(px_hose, px_bus, px_devfn, 0xcc, &freq); + dump_HT_speeds("PCI-X HT Uplink", cfg, freq); + early_read_config_dword(px_hose, px_bus, px_devfn, 0xc8, &cfg); + early_read_config_dword(px_hose, px_bus, px_devfn, 0xd0, &freq); + dump_HT_speeds("PCI-X HT Downlink", cfg, freq); +} +#endif /* 0 */ + +/* + * Early video resume hook + */ + +static void (*pmac_early_vresume_proc)(void *data); +static void *pmac_early_vresume_data; + +void pmac_set_early_video_resume(void (*proc)(void *data), void *data) +{ + if (!machine_is(powermac)) + return; + preempt_disable(); + pmac_early_vresume_proc = proc; + pmac_early_vresume_data = data; + preempt_enable(); +} +EXPORT_SYMBOL(pmac_set_early_video_resume); + +void pmac_call_early_video_resume(void) +{ + if (pmac_early_vresume_proc) + pmac_early_vresume_proc(pmac_early_vresume_data); +} + +/* + * AGP related suspend/resume code + */ + +static struct pci_dev *pmac_agp_bridge; +static int (*pmac_agp_suspend)(struct pci_dev *bridge); +static int (*pmac_agp_resume)(struct pci_dev *bridge); + +void pmac_register_agp_pm(struct pci_dev *bridge, + int (*suspend)(struct pci_dev *bridge), + int (*resume)(struct pci_dev *bridge)) +{ + if (suspend || resume) { + pmac_agp_bridge = bridge; + pmac_agp_suspend = suspend; + pmac_agp_resume = resume; + return; + } + if (bridge != pmac_agp_bridge) + return; + pmac_agp_suspend = pmac_agp_resume = NULL; + return; +} +EXPORT_SYMBOL(pmac_register_agp_pm); + +void pmac_suspend_agp_for_card(struct pci_dev *dev) +{ + if (pmac_agp_bridge == NULL || pmac_agp_suspend == NULL) + return; + if (pmac_agp_bridge->bus != dev->bus) + return; + pmac_agp_suspend(pmac_agp_bridge); +} +EXPORT_SYMBOL(pmac_suspend_agp_for_card); + +void pmac_resume_agp_for_card(struct pci_dev *dev) +{ + if (pmac_agp_bridge == NULL || pmac_agp_resume == NULL) + return; + if (pmac_agp_bridge->bus != dev->bus) + return; + pmac_agp_resume(pmac_agp_bridge); +} +EXPORT_SYMBOL(pmac_resume_agp_for_card); + +int pmac_get_uninorth_variant(void) +{ + return uninorth_maj; +} |