summaryrefslogtreecommitdiffstats
path: root/arch/powerpc/platforms/powermac/smp.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/powerpc/platforms/powermac/smp.c')
-rw-r--r--arch/powerpc/platforms/powermac/smp.c1025
1 files changed, 1025 insertions, 0 deletions
diff --git a/arch/powerpc/platforms/powermac/smp.c b/arch/powerpc/platforms/powermac/smp.c
new file mode 100644
index 000000000..5b26a9012
--- /dev/null
+++ b/arch/powerpc/platforms/powermac/smp.c
@@ -0,0 +1,1025 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * SMP support for power macintosh.
+ *
+ * We support both the old "powersurge" SMP architecture
+ * and the current Core99 (G4 PowerMac) machines.
+ *
+ * Note that we don't support the very first rev. of
+ * Apple/DayStar 2 CPUs board, the one with the funky
+ * watchdog. Hopefully, none of these should be there except
+ * maybe internally to Apple. I should probably still add some
+ * code to detect this card though and disable SMP. --BenH.
+ *
+ * Support Macintosh G4 SMP by Troy Benjegerdes (hozer@drgw.net)
+ * and Ben Herrenschmidt <benh@kernel.crashing.org>.
+ *
+ * Support for DayStar quad CPU cards
+ * Copyright (C) XLR8, Inc. 1994-2000
+ */
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/sched/hotplug.h>
+#include <linux/smp.h>
+#include <linux/interrupt.h>
+#include <linux/irqdomain.h>
+#include <linux/kernel_stat.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/spinlock.h>
+#include <linux/errno.h>
+#include <linux/hardirq.h>
+#include <linux/cpu.h>
+#include <linux/compiler.h>
+#include <linux/pgtable.h>
+
+#include <asm/ptrace.h>
+#include <linux/atomic.h>
+#include <asm/code-patching.h>
+#include <asm/irq.h>
+#include <asm/page.h>
+#include <asm/sections.h>
+#include <asm/io.h>
+#include <asm/smp.h>
+#include <asm/machdep.h>
+#include <asm/pmac_feature.h>
+#include <asm/time.h>
+#include <asm/mpic.h>
+#include <asm/cacheflush.h>
+#include <asm/keylargo.h>
+#include <asm/pmac_low_i2c.h>
+#include <asm/pmac_pfunc.h>
+#include <asm/inst.h>
+
+#include "pmac.h"
+
+#undef DEBUG
+
+#ifdef DEBUG
+#define DBG(fmt...) udbg_printf(fmt)
+#else
+#define DBG(fmt...)
+#endif
+
+extern void __secondary_start_pmac_0(void);
+
+static void (*pmac_tb_freeze)(int freeze);
+static u64 timebase;
+static int tb_req;
+
+#ifdef CONFIG_PPC_PMAC32_PSURGE
+
+/*
+ * Powersurge (old powermac SMP) support.
+ */
+
+/* Addresses for powersurge registers */
+#define HAMMERHEAD_BASE 0xf8000000
+#define HHEAD_CONFIG 0x90
+#define HHEAD_SEC_INTR 0xc0
+
+/* register for interrupting the primary processor on the powersurge */
+/* N.B. this is actually the ethernet ROM! */
+#define PSURGE_PRI_INTR 0xf3019000
+
+/* register for storing the start address for the secondary processor */
+/* N.B. this is the PCI config space address register for the 1st bridge */
+#define PSURGE_START 0xf2800000
+
+/* Daystar/XLR8 4-CPU card */
+#define PSURGE_QUAD_REG_ADDR 0xf8800000
+
+#define PSURGE_QUAD_IRQ_SET 0
+#define PSURGE_QUAD_IRQ_CLR 1
+#define PSURGE_QUAD_IRQ_PRIMARY 2
+#define PSURGE_QUAD_CKSTOP_CTL 3
+#define PSURGE_QUAD_PRIMARY_ARB 4
+#define PSURGE_QUAD_BOARD_ID 6
+#define PSURGE_QUAD_WHICH_CPU 7
+#define PSURGE_QUAD_CKSTOP_RDBK 8
+#define PSURGE_QUAD_RESET_CTL 11
+
+#define PSURGE_QUAD_OUT(r, v) (out_8(quad_base + ((r) << 4) + 4, (v)))
+#define PSURGE_QUAD_IN(r) (in_8(quad_base + ((r) << 4) + 4) & 0x0f)
+#define PSURGE_QUAD_BIS(r, v) (PSURGE_QUAD_OUT((r), PSURGE_QUAD_IN(r) | (v)))
+#define PSURGE_QUAD_BIC(r, v) (PSURGE_QUAD_OUT((r), PSURGE_QUAD_IN(r) & ~(v)))
+
+/* virtual addresses for the above */
+static volatile u8 __iomem *hhead_base;
+static volatile u8 __iomem *quad_base;
+static volatile u32 __iomem *psurge_pri_intr;
+static volatile u8 __iomem *psurge_sec_intr;
+static volatile u32 __iomem *psurge_start;
+
+/* values for psurge_type */
+#define PSURGE_NONE -1
+#define PSURGE_DUAL 0
+#define PSURGE_QUAD_OKEE 1
+#define PSURGE_QUAD_COTTON 2
+#define PSURGE_QUAD_ICEGRASS 3
+
+/* what sort of powersurge board we have */
+static int psurge_type = PSURGE_NONE;
+
+/* irq for secondary cpus to report */
+static struct irq_domain *psurge_host;
+int psurge_secondary_virq;
+
+/*
+ * Set and clear IPIs for powersurge.
+ */
+static inline void psurge_set_ipi(int cpu)
+{
+ if (psurge_type == PSURGE_NONE)
+ return;
+ if (cpu == 0)
+ in_be32(psurge_pri_intr);
+ else if (psurge_type == PSURGE_DUAL)
+ out_8(psurge_sec_intr, 0);
+ else
+ PSURGE_QUAD_OUT(PSURGE_QUAD_IRQ_SET, 1 << cpu);
+}
+
+static inline void psurge_clr_ipi(int cpu)
+{
+ if (cpu > 0) {
+ switch(psurge_type) {
+ case PSURGE_DUAL:
+ out_8(psurge_sec_intr, ~0);
+ break;
+ case PSURGE_NONE:
+ break;
+ default:
+ PSURGE_QUAD_OUT(PSURGE_QUAD_IRQ_CLR, 1 << cpu);
+ }
+ }
+}
+
+/*
+ * On powersurge (old SMP powermac architecture) we don't have
+ * separate IPIs for separate messages like openpic does. Instead
+ * use the generic demux helpers
+ * -- paulus.
+ */
+static irqreturn_t psurge_ipi_intr(int irq, void *d)
+{
+ psurge_clr_ipi(smp_processor_id());
+ smp_ipi_demux();
+
+ return IRQ_HANDLED;
+}
+
+static void smp_psurge_cause_ipi(int cpu)
+{
+ psurge_set_ipi(cpu);
+}
+
+static int psurge_host_map(struct irq_domain *h, unsigned int virq,
+ irq_hw_number_t hw)
+{
+ irq_set_chip_and_handler(virq, &dummy_irq_chip, handle_percpu_irq);
+
+ return 0;
+}
+
+static const struct irq_domain_ops psurge_host_ops = {
+ .map = psurge_host_map,
+};
+
+static int __init psurge_secondary_ipi_init(void)
+{
+ int rc = -ENOMEM;
+
+ psurge_host = irq_domain_add_nomap(NULL, ~0, &psurge_host_ops, NULL);
+
+ if (psurge_host)
+ psurge_secondary_virq = irq_create_direct_mapping(psurge_host);
+
+ if (psurge_secondary_virq)
+ rc = request_irq(psurge_secondary_virq, psurge_ipi_intr,
+ IRQF_PERCPU | IRQF_NO_THREAD, "IPI", NULL);
+
+ if (rc)
+ pr_err("Failed to setup secondary cpu IPI\n");
+
+ return rc;
+}
+
+/*
+ * Determine a quad card presence. We read the board ID register, we
+ * force the data bus to change to something else, and we read it again.
+ * It it's stable, then the register probably exist (ugh !)
+ */
+static int __init psurge_quad_probe(void)
+{
+ int type;
+ unsigned int i;
+
+ type = PSURGE_QUAD_IN(PSURGE_QUAD_BOARD_ID);
+ if (type < PSURGE_QUAD_OKEE || type > PSURGE_QUAD_ICEGRASS
+ || type != PSURGE_QUAD_IN(PSURGE_QUAD_BOARD_ID))
+ return PSURGE_DUAL;
+
+ /* looks OK, try a slightly more rigorous test */
+ /* bogus is not necessarily cacheline-aligned,
+ though I don't suppose that really matters. -- paulus */
+ for (i = 0; i < 100; i++) {
+ volatile u32 bogus[8];
+ bogus[(0+i)%8] = 0x00000000;
+ bogus[(1+i)%8] = 0x55555555;
+ bogus[(2+i)%8] = 0xFFFFFFFF;
+ bogus[(3+i)%8] = 0xAAAAAAAA;
+ bogus[(4+i)%8] = 0x33333333;
+ bogus[(5+i)%8] = 0xCCCCCCCC;
+ bogus[(6+i)%8] = 0xCCCCCCCC;
+ bogus[(7+i)%8] = 0x33333333;
+ wmb();
+ asm volatile("dcbf 0,%0" : : "r" (bogus) : "memory");
+ mb();
+ if (type != PSURGE_QUAD_IN(PSURGE_QUAD_BOARD_ID))
+ return PSURGE_DUAL;
+ }
+ return type;
+}
+
+static void __init psurge_quad_init(void)
+{
+ int procbits;
+
+ if (ppc_md.progress) ppc_md.progress("psurge_quad_init", 0x351);
+ procbits = ~PSURGE_QUAD_IN(PSURGE_QUAD_WHICH_CPU);
+ if (psurge_type == PSURGE_QUAD_ICEGRASS)
+ PSURGE_QUAD_BIS(PSURGE_QUAD_RESET_CTL, procbits);
+ else
+ PSURGE_QUAD_BIC(PSURGE_QUAD_CKSTOP_CTL, procbits);
+ mdelay(33);
+ out_8(psurge_sec_intr, ~0);
+ PSURGE_QUAD_OUT(PSURGE_QUAD_IRQ_CLR, procbits);
+ PSURGE_QUAD_BIS(PSURGE_QUAD_RESET_CTL, procbits);
+ if (psurge_type != PSURGE_QUAD_ICEGRASS)
+ PSURGE_QUAD_BIS(PSURGE_QUAD_CKSTOP_CTL, procbits);
+ PSURGE_QUAD_BIC(PSURGE_QUAD_PRIMARY_ARB, procbits);
+ mdelay(33);
+ PSURGE_QUAD_BIC(PSURGE_QUAD_RESET_CTL, procbits);
+ mdelay(33);
+ PSURGE_QUAD_BIS(PSURGE_QUAD_PRIMARY_ARB, procbits);
+ mdelay(33);
+}
+
+static void __init smp_psurge_probe(void)
+{
+ int i, ncpus;
+ struct device_node *dn;
+
+ /*
+ * The powersurge cpu board can be used in the generation
+ * of powermacs that have a socket for an upgradeable cpu card,
+ * including the 7500, 8500, 9500, 9600.
+ * The device tree doesn't tell you if you have 2 cpus because
+ * OF doesn't know anything about the 2nd processor.
+ * Instead we look for magic bits in magic registers,
+ * in the hammerhead memory controller in the case of the
+ * dual-cpu powersurge board. -- paulus.
+ */
+ dn = of_find_node_by_name(NULL, "hammerhead");
+ if (dn == NULL)
+ return;
+ of_node_put(dn);
+
+ hhead_base = ioremap(HAMMERHEAD_BASE, 0x800);
+ quad_base = ioremap(PSURGE_QUAD_REG_ADDR, 1024);
+ psurge_sec_intr = hhead_base + HHEAD_SEC_INTR;
+
+ psurge_type = psurge_quad_probe();
+ if (psurge_type != PSURGE_DUAL) {
+ psurge_quad_init();
+ /* All released cards using this HW design have 4 CPUs */
+ ncpus = 4;
+ /* No sure how timebase sync works on those, let's use SW */
+ smp_ops->give_timebase = smp_generic_give_timebase;
+ smp_ops->take_timebase = smp_generic_take_timebase;
+ } else {
+ iounmap(quad_base);
+ if ((in_8(hhead_base + HHEAD_CONFIG) & 0x02) == 0) {
+ /* not a dual-cpu card */
+ iounmap(hhead_base);
+ psurge_type = PSURGE_NONE;
+ return;
+ }
+ ncpus = 2;
+ }
+
+ if (psurge_secondary_ipi_init())
+ return;
+
+ psurge_start = ioremap(PSURGE_START, 4);
+ psurge_pri_intr = ioremap(PSURGE_PRI_INTR, 4);
+
+ /* This is necessary because OF doesn't know about the
+ * secondary cpu(s), and thus there aren't nodes in the
+ * device tree for them, and smp_setup_cpu_maps hasn't
+ * set their bits in cpu_present_mask.
+ */
+ if (ncpus > NR_CPUS)
+ ncpus = NR_CPUS;
+ for (i = 1; i < ncpus ; ++i)
+ set_cpu_present(i, true);
+
+ if (ppc_md.progress) ppc_md.progress("smp_psurge_probe - done", 0x352);
+}
+
+static int __init smp_psurge_kick_cpu(int nr)
+{
+ unsigned long start = __pa(__secondary_start_pmac_0) + nr * 8;
+ unsigned long a, flags;
+ int i, j;
+
+ /* Defining this here is evil ... but I prefer hiding that
+ * crap to avoid giving people ideas that they can do the
+ * same.
+ */
+ extern volatile unsigned int cpu_callin_map[NR_CPUS];
+
+ /* may need to flush here if secondary bats aren't setup */
+ for (a = KERNELBASE; a < KERNELBASE + 0x800000; a += 32)
+ asm volatile("dcbf 0,%0" : : "r" (a) : "memory");
+ asm volatile("sync");
+
+ if (ppc_md.progress) ppc_md.progress("smp_psurge_kick_cpu", 0x353);
+
+ /* This is going to freeze the timeebase, we disable interrupts */
+ local_irq_save(flags);
+
+ out_be32(psurge_start, start);
+ mb();
+
+ psurge_set_ipi(nr);
+
+ /*
+ * We can't use udelay here because the timebase is now frozen.
+ */
+ for (i = 0; i < 2000; ++i)
+ asm volatile("nop" : : : "memory");
+ psurge_clr_ipi(nr);
+
+ /*
+ * Also, because the timebase is frozen, we must not return to the
+ * caller which will try to do udelay's etc... Instead, we wait -here-
+ * for the CPU to callin.
+ */
+ for (i = 0; i < 100000 && !cpu_callin_map[nr]; ++i) {
+ for (j = 1; j < 10000; j++)
+ asm volatile("nop" : : : "memory");
+ asm volatile("sync" : : : "memory");
+ }
+ if (!cpu_callin_map[nr])
+ goto stuck;
+
+ /* And we do the TB sync here too for standard dual CPU cards */
+ if (psurge_type == PSURGE_DUAL) {
+ while(!tb_req)
+ barrier();
+ tb_req = 0;
+ mb();
+ timebase = get_tb();
+ mb();
+ while (timebase)
+ barrier();
+ mb();
+ }
+ stuck:
+ /* now interrupt the secondary, restarting both TBs */
+ if (psurge_type == PSURGE_DUAL)
+ psurge_set_ipi(1);
+
+ if (ppc_md.progress) ppc_md.progress("smp_psurge_kick_cpu - done", 0x354);
+
+ return 0;
+}
+
+static void __init smp_psurge_setup_cpu(int cpu_nr)
+{
+ unsigned long flags = IRQF_PERCPU | IRQF_NO_THREAD;
+ int irq;
+
+ if (cpu_nr != 0 || !psurge_start)
+ return;
+
+ /* reset the entry point so if we get another intr we won't
+ * try to startup again */
+ out_be32(psurge_start, 0x100);
+ irq = irq_create_mapping(NULL, 30);
+ if (request_irq(irq, psurge_ipi_intr, flags, "primary IPI", NULL))
+ printk(KERN_ERR "Couldn't get primary IPI interrupt");
+}
+
+void __init smp_psurge_take_timebase(void)
+{
+ if (psurge_type != PSURGE_DUAL)
+ return;
+
+ tb_req = 1;
+ mb();
+ while (!timebase)
+ barrier();
+ mb();
+ set_tb(timebase >> 32, timebase & 0xffffffff);
+ timebase = 0;
+ mb();
+ set_dec(tb_ticks_per_jiffy/2);
+}
+
+void __init smp_psurge_give_timebase(void)
+{
+ /* Nothing to do here */
+}
+
+/* PowerSurge-style Macs */
+struct smp_ops_t psurge_smp_ops = {
+ .message_pass = NULL, /* Use smp_muxed_ipi_message_pass */
+ .cause_ipi = smp_psurge_cause_ipi,
+ .cause_nmi_ipi = NULL,
+ .probe = smp_psurge_probe,
+ .kick_cpu = smp_psurge_kick_cpu,
+ .setup_cpu = smp_psurge_setup_cpu,
+ .give_timebase = smp_psurge_give_timebase,
+ .take_timebase = smp_psurge_take_timebase,
+};
+#endif /* CONFIG_PPC_PMAC32_PSURGE */
+
+/*
+ * Core 99 and later support
+ */
+
+
+static void smp_core99_give_timebase(void)
+{
+ unsigned long flags;
+
+ local_irq_save(flags);
+
+ while(!tb_req)
+ barrier();
+ tb_req = 0;
+ (*pmac_tb_freeze)(1);
+ mb();
+ timebase = get_tb();
+ mb();
+ while (timebase)
+ barrier();
+ mb();
+ (*pmac_tb_freeze)(0);
+ mb();
+
+ local_irq_restore(flags);
+}
+
+
+static void smp_core99_take_timebase(void)
+{
+ unsigned long flags;
+
+ local_irq_save(flags);
+
+ tb_req = 1;
+ mb();
+ while (!timebase)
+ barrier();
+ mb();
+ set_tb(timebase >> 32, timebase & 0xffffffff);
+ timebase = 0;
+ mb();
+
+ local_irq_restore(flags);
+}
+
+#ifdef CONFIG_PPC64
+/*
+ * G5s enable/disable the timebase via an i2c-connected clock chip.
+ */
+static struct pmac_i2c_bus *pmac_tb_clock_chip_host;
+static u8 pmac_tb_pulsar_addr;
+
+static void smp_core99_cypress_tb_freeze(int freeze)
+{
+ u8 data;
+ int rc;
+
+ /* Strangely, the device-tree says address is 0xd2, but darwin
+ * accesses 0xd0 ...
+ */
+ pmac_i2c_setmode(pmac_tb_clock_chip_host,
+ pmac_i2c_mode_combined);
+ rc = pmac_i2c_xfer(pmac_tb_clock_chip_host,
+ 0xd0 | pmac_i2c_read,
+ 1, 0x81, &data, 1);
+ if (rc != 0)
+ goto bail;
+
+ data = (data & 0xf3) | (freeze ? 0x00 : 0x0c);
+
+ pmac_i2c_setmode(pmac_tb_clock_chip_host, pmac_i2c_mode_stdsub);
+ rc = pmac_i2c_xfer(pmac_tb_clock_chip_host,
+ 0xd0 | pmac_i2c_write,
+ 1, 0x81, &data, 1);
+
+ bail:
+ if (rc != 0) {
+ printk("Cypress Timebase %s rc: %d\n",
+ freeze ? "freeze" : "unfreeze", rc);
+ panic("Timebase freeze failed !\n");
+ }
+}
+
+
+static void smp_core99_pulsar_tb_freeze(int freeze)
+{
+ u8 data;
+ int rc;
+
+ pmac_i2c_setmode(pmac_tb_clock_chip_host,
+ pmac_i2c_mode_combined);
+ rc = pmac_i2c_xfer(pmac_tb_clock_chip_host,
+ pmac_tb_pulsar_addr | pmac_i2c_read,
+ 1, 0x2e, &data, 1);
+ if (rc != 0)
+ goto bail;
+
+ data = (data & 0x88) | (freeze ? 0x11 : 0x22);
+
+ pmac_i2c_setmode(pmac_tb_clock_chip_host, pmac_i2c_mode_stdsub);
+ rc = pmac_i2c_xfer(pmac_tb_clock_chip_host,
+ pmac_tb_pulsar_addr | pmac_i2c_write,
+ 1, 0x2e, &data, 1);
+ bail:
+ if (rc != 0) {
+ printk(KERN_ERR "Pulsar Timebase %s rc: %d\n",
+ freeze ? "freeze" : "unfreeze", rc);
+ panic("Timebase freeze failed !\n");
+ }
+}
+
+static void __init smp_core99_setup_i2c_hwsync(int ncpus)
+{
+ struct device_node *cc = NULL;
+ struct device_node *p;
+ const char *name = NULL;
+ const u32 *reg;
+ int ok;
+
+ /* Look for the clock chip */
+ for_each_node_by_name(cc, "i2c-hwclock") {
+ p = of_get_parent(cc);
+ ok = p && of_device_is_compatible(p, "uni-n-i2c");
+ of_node_put(p);
+ if (!ok)
+ continue;
+
+ pmac_tb_clock_chip_host = pmac_i2c_find_bus(cc);
+ if (pmac_tb_clock_chip_host == NULL)
+ continue;
+ reg = of_get_property(cc, "reg", NULL);
+ if (reg == NULL)
+ continue;
+ switch (*reg) {
+ case 0xd2:
+ if (of_device_is_compatible(cc,"pulsar-legacy-slewing")) {
+ pmac_tb_freeze = smp_core99_pulsar_tb_freeze;
+ pmac_tb_pulsar_addr = 0xd2;
+ name = "Pulsar";
+ } else if (of_device_is_compatible(cc, "cy28508")) {
+ pmac_tb_freeze = smp_core99_cypress_tb_freeze;
+ name = "Cypress";
+ }
+ break;
+ case 0xd4:
+ pmac_tb_freeze = smp_core99_pulsar_tb_freeze;
+ pmac_tb_pulsar_addr = 0xd4;
+ name = "Pulsar";
+ break;
+ }
+ if (pmac_tb_freeze != NULL)
+ break;
+ }
+ if (pmac_tb_freeze != NULL) {
+ /* Open i2c bus for synchronous access */
+ if (pmac_i2c_open(pmac_tb_clock_chip_host, 1)) {
+ printk(KERN_ERR "Failed top open i2c bus for clock"
+ " sync, fallback to software sync !\n");
+ goto no_i2c_sync;
+ }
+ printk(KERN_INFO "Processor timebase sync using %s i2c clock\n",
+ name);
+ return;
+ }
+ no_i2c_sync:
+ pmac_tb_freeze = NULL;
+ pmac_tb_clock_chip_host = NULL;
+}
+
+
+
+/*
+ * Newer G5s uses a platform function
+ */
+
+static void smp_core99_pfunc_tb_freeze(int freeze)
+{
+ struct device_node *cpus;
+ struct pmf_args args;
+
+ cpus = of_find_node_by_path("/cpus");
+ BUG_ON(cpus == NULL);
+ args.count = 1;
+ args.u[0].v = !freeze;
+ pmf_call_function(cpus, "cpu-timebase", &args);
+ of_node_put(cpus);
+}
+
+#else /* CONFIG_PPC64 */
+
+/*
+ * SMP G4 use a GPIO to enable/disable the timebase.
+ */
+
+static unsigned int core99_tb_gpio; /* Timebase freeze GPIO */
+
+static void smp_core99_gpio_tb_freeze(int freeze)
+{
+ if (freeze)
+ pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, core99_tb_gpio, 4);
+ else
+ pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, core99_tb_gpio, 0);
+ pmac_call_feature(PMAC_FTR_READ_GPIO, NULL, core99_tb_gpio, 0);
+}
+
+
+#endif /* !CONFIG_PPC64 */
+
+static void core99_init_caches(int cpu)
+{
+#ifndef CONFIG_PPC64
+ /* L2 and L3 cache settings to pass from CPU0 to CPU1 on G4 cpus */
+ static long int core99_l2_cache;
+ static long int core99_l3_cache;
+
+ if (!cpu_has_feature(CPU_FTR_L2CR))
+ return;
+
+ if (cpu == 0) {
+ core99_l2_cache = _get_L2CR();
+ printk("CPU0: L2CR is %lx\n", core99_l2_cache);
+ } else {
+ printk("CPU%d: L2CR was %lx\n", cpu, _get_L2CR());
+ _set_L2CR(0);
+ _set_L2CR(core99_l2_cache);
+ printk("CPU%d: L2CR set to %lx\n", cpu, core99_l2_cache);
+ }
+
+ if (!cpu_has_feature(CPU_FTR_L3CR))
+ return;
+
+ if (cpu == 0){
+ core99_l3_cache = _get_L3CR();
+ printk("CPU0: L3CR is %lx\n", core99_l3_cache);
+ } else {
+ printk("CPU%d: L3CR was %lx\n", cpu, _get_L3CR());
+ _set_L3CR(0);
+ _set_L3CR(core99_l3_cache);
+ printk("CPU%d: L3CR set to %lx\n", cpu, core99_l3_cache);
+ }
+#endif /* !CONFIG_PPC64 */
+}
+
+static void __init smp_core99_setup(int ncpus)
+{
+#ifdef CONFIG_PPC64
+
+ /* i2c based HW sync on some G5s */
+ if (of_machine_is_compatible("PowerMac7,2") ||
+ of_machine_is_compatible("PowerMac7,3") ||
+ of_machine_is_compatible("RackMac3,1"))
+ smp_core99_setup_i2c_hwsync(ncpus);
+
+ /* pfunc based HW sync on recent G5s */
+ if (pmac_tb_freeze == NULL) {
+ struct device_node *cpus =
+ of_find_node_by_path("/cpus");
+ if (cpus &&
+ of_get_property(cpus, "platform-cpu-timebase", NULL)) {
+ pmac_tb_freeze = smp_core99_pfunc_tb_freeze;
+ printk(KERN_INFO "Processor timebase sync using"
+ " platform function\n");
+ }
+ of_node_put(cpus);
+ }
+
+#else /* CONFIG_PPC64 */
+
+ /* GPIO based HW sync on ppc32 Core99 */
+ if (pmac_tb_freeze == NULL && !of_machine_is_compatible("MacRISC4")) {
+ struct device_node *cpu;
+ const u32 *tbprop = NULL;
+
+ core99_tb_gpio = KL_GPIO_TB_ENABLE; /* default value */
+ cpu = of_find_node_by_type(NULL, "cpu");
+ if (cpu != NULL) {
+ tbprop = of_get_property(cpu, "timebase-enable", NULL);
+ if (tbprop)
+ core99_tb_gpio = *tbprop;
+ of_node_put(cpu);
+ }
+ pmac_tb_freeze = smp_core99_gpio_tb_freeze;
+ printk(KERN_INFO "Processor timebase sync using"
+ " GPIO 0x%02x\n", core99_tb_gpio);
+ }
+
+#endif /* CONFIG_PPC64 */
+
+ /* No timebase sync, fallback to software */
+ if (pmac_tb_freeze == NULL) {
+ smp_ops->give_timebase = smp_generic_give_timebase;
+ smp_ops->take_timebase = smp_generic_take_timebase;
+ printk(KERN_INFO "Processor timebase sync using software\n");
+ }
+
+#ifndef CONFIG_PPC64
+ {
+ int i;
+
+ /* XXX should get this from reg properties */
+ for (i = 1; i < ncpus; ++i)
+ set_hard_smp_processor_id(i, i);
+ }
+#endif
+
+ /* 32 bits SMP can't NAP */
+ if (!of_machine_is_compatible("MacRISC4"))
+ powersave_nap = 0;
+}
+
+static void __init smp_core99_probe(void)
+{
+ struct device_node *cpus;
+ int ncpus = 0;
+
+ if (ppc_md.progress) ppc_md.progress("smp_core99_probe", 0x345);
+
+ /* Count CPUs in the device-tree */
+ for_each_node_by_type(cpus, "cpu")
+ ++ncpus;
+
+ printk(KERN_INFO "PowerMac SMP probe found %d cpus\n", ncpus);
+
+ /* Nothing more to do if less than 2 of them */
+ if (ncpus <= 1)
+ return;
+
+ /* We need to perform some early initialisations before we can start
+ * setting up SMP as we are running before initcalls
+ */
+ pmac_pfunc_base_install();
+ pmac_i2c_init();
+
+ /* Setup various bits like timebase sync method, ability to nap, ... */
+ smp_core99_setup(ncpus);
+
+ /* Install IPIs */
+ mpic_request_ipis();
+
+ /* Collect l2cr and l3cr values from CPU 0 */
+ core99_init_caches(0);
+}
+
+static int smp_core99_kick_cpu(int nr)
+{
+ unsigned int save_vector;
+ unsigned long target, flags;
+ unsigned int *vector = (unsigned int *)(PAGE_OFFSET+0x100);
+
+ if (nr < 0 || nr > 3)
+ return -ENOENT;
+
+ if (ppc_md.progress)
+ ppc_md.progress("smp_core99_kick_cpu", 0x346);
+
+ local_irq_save(flags);
+
+ /* Save reset vector */
+ save_vector = *vector;
+
+ /* Setup fake reset vector that does
+ * b __secondary_start_pmac_0 + nr*8
+ */
+ target = (unsigned long) __secondary_start_pmac_0 + nr * 8;
+ patch_branch(vector, target, BRANCH_SET_LINK);
+
+ /* Put some life in our friend */
+ pmac_call_feature(PMAC_FTR_RESET_CPU, NULL, nr, 0);
+
+ /* FIXME: We wait a bit for the CPU to take the exception, I should
+ * instead wait for the entry code to set something for me. Well,
+ * ideally, all that crap will be done in prom.c and the CPU left
+ * in a RAM-based wait loop like CHRP.
+ */
+ mdelay(1);
+
+ /* Restore our exception vector */
+ patch_instruction(vector, ppc_inst(save_vector));
+
+ local_irq_restore(flags);
+ if (ppc_md.progress) ppc_md.progress("smp_core99_kick_cpu done", 0x347);
+
+ return 0;
+}
+
+static void smp_core99_setup_cpu(int cpu_nr)
+{
+ /* Setup L2/L3 */
+ if (cpu_nr != 0)
+ core99_init_caches(cpu_nr);
+
+ /* Setup openpic */
+ mpic_setup_this_cpu();
+}
+
+#ifdef CONFIG_PPC64
+#ifdef CONFIG_HOTPLUG_CPU
+static unsigned int smp_core99_host_open;
+
+static int smp_core99_cpu_prepare(unsigned int cpu)
+{
+ int rc;
+
+ /* Open i2c bus if it was used for tb sync */
+ if (pmac_tb_clock_chip_host && !smp_core99_host_open) {
+ rc = pmac_i2c_open(pmac_tb_clock_chip_host, 1);
+ if (rc) {
+ pr_err("Failed to open i2c bus for time sync\n");
+ return notifier_from_errno(rc);
+ }
+ smp_core99_host_open = 1;
+ }
+ return 0;
+}
+
+static int smp_core99_cpu_online(unsigned int cpu)
+{
+ /* Close i2c bus if it was used for tb sync */
+ if (pmac_tb_clock_chip_host && smp_core99_host_open) {
+ pmac_i2c_close(pmac_tb_clock_chip_host);
+ smp_core99_host_open = 0;
+ }
+ return 0;
+}
+#endif /* CONFIG_HOTPLUG_CPU */
+
+static void __init smp_core99_bringup_done(void)
+{
+ /* Close i2c bus if it was used for tb sync */
+ if (pmac_tb_clock_chip_host)
+ pmac_i2c_close(pmac_tb_clock_chip_host);
+
+ /* If we didn't start the second CPU, we must take
+ * it off the bus.
+ */
+ if (of_machine_is_compatible("MacRISC4") &&
+ num_online_cpus() < 2) {
+ set_cpu_present(1, false);
+ g5_phy_disable_cpu1();
+ }
+#ifdef CONFIG_HOTPLUG_CPU
+ cpuhp_setup_state_nocalls(CPUHP_POWERPC_PMAC_PREPARE,
+ "powerpc/pmac:prepare", smp_core99_cpu_prepare,
+ NULL);
+ cpuhp_setup_state_nocalls(CPUHP_AP_ONLINE_DYN, "powerpc/pmac:online",
+ smp_core99_cpu_online, NULL);
+#endif
+
+ if (ppc_md.progress)
+ ppc_md.progress("smp_core99_bringup_done", 0x349);
+}
+#endif /* CONFIG_PPC64 */
+
+#ifdef CONFIG_HOTPLUG_CPU
+
+static int smp_core99_cpu_disable(void)
+{
+ int rc = generic_cpu_disable();
+ if (rc)
+ return rc;
+
+ mpic_cpu_set_priority(0xf);
+
+ cleanup_cpu_mmu_context();
+
+ return 0;
+}
+
+#ifdef CONFIG_PPC32
+
+static void pmac_cpu_offline_self(void)
+{
+ int cpu = smp_processor_id();
+
+ local_irq_disable();
+ idle_task_exit();
+ pr_debug("CPU%d offline\n", cpu);
+ generic_set_cpu_dead(cpu);
+ smp_wmb();
+ mb();
+ low_cpu_offline_self();
+}
+
+#else /* CONFIG_PPC32 */
+
+static void pmac_cpu_offline_self(void)
+{
+ int cpu = smp_processor_id();
+
+ local_irq_disable();
+ idle_task_exit();
+
+ /*
+ * turn off as much as possible, we'll be
+ * kicked out as this will only be invoked
+ * on core99 platforms for now ...
+ */
+
+ printk(KERN_INFO "CPU#%d offline\n", cpu);
+ generic_set_cpu_dead(cpu);
+ smp_wmb();
+
+ /*
+ * Re-enable interrupts. The NAP code needs to enable them
+ * anyways, do it now so we deal with the case where one already
+ * happened while soft-disabled.
+ * We shouldn't get any external interrupts, only decrementer, and the
+ * decrementer handler is safe for use on offline CPUs
+ */
+ local_irq_enable();
+
+ while (1) {
+ /* let's not take timer interrupts too often ... */
+ set_dec(0x7fffffff);
+
+ /* Enter NAP mode */
+ power4_idle();
+ }
+}
+
+#endif /* else CONFIG_PPC32 */
+#endif /* CONFIG_HOTPLUG_CPU */
+
+/* Core99 Macs (dual G4s and G5s) */
+static struct smp_ops_t core99_smp_ops = {
+ .message_pass = smp_mpic_message_pass,
+ .probe = smp_core99_probe,
+#ifdef CONFIG_PPC64
+ .bringup_done = smp_core99_bringup_done,
+#endif
+ .kick_cpu = smp_core99_kick_cpu,
+ .setup_cpu = smp_core99_setup_cpu,
+ .give_timebase = smp_core99_give_timebase,
+ .take_timebase = smp_core99_take_timebase,
+#if defined(CONFIG_HOTPLUG_CPU)
+ .cpu_disable = smp_core99_cpu_disable,
+ .cpu_die = generic_cpu_die,
+#endif
+};
+
+void __init pmac_setup_smp(void)
+{
+ struct device_node *np;
+
+ /* Check for Core99 */
+ np = of_find_node_by_name(NULL, "uni-n");
+ if (!np)
+ np = of_find_node_by_name(NULL, "u3");
+ if (!np)
+ np = of_find_node_by_name(NULL, "u4");
+ if (np) {
+ of_node_put(np);
+ smp_ops = &core99_smp_ops;
+ }
+#ifdef CONFIG_PPC_PMAC32_PSURGE
+ else {
+ /* We have to set bits in cpu_possible_mask here since the
+ * secondary CPU(s) aren't in the device tree. Various
+ * things won't be initialized for CPUs not in the possible
+ * map, so we really need to fix it up here.
+ */
+ int cpu;
+
+ for (cpu = 1; cpu < 4 && cpu < NR_CPUS; ++cpu)
+ set_cpu_possible(cpu, true);
+ smp_ops = &psurge_smp_ops;
+ }
+#endif /* CONFIG_PPC_PMAC32_PSURGE */
+
+#ifdef CONFIG_HOTPLUG_CPU
+ smp_ops->cpu_offline_self = pmac_cpu_offline_self;
+#endif
+}
+
+