diff options
Diffstat (limited to '')
-rw-r--r-- | arch/powerpc/platforms/pseries/eeh_pseries.c | 887 |
1 files changed, 887 insertions, 0 deletions
diff --git a/arch/powerpc/platforms/pseries/eeh_pseries.c b/arch/powerpc/platforms/pseries/eeh_pseries.c new file mode 100644 index 000000000..e5a58a9b2 --- /dev/null +++ b/arch/powerpc/platforms/pseries/eeh_pseries.c @@ -0,0 +1,887 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * The file intends to implement the platform dependent EEH operations on pseries. + * Actually, the pseries platform is built based on RTAS heavily. That means the + * pseries platform dependent EEH operations will be built on RTAS calls. The functions + * are derived from arch/powerpc/platforms/pseries/eeh.c and necessary cleanup has + * been done. + * + * Copyright Benjamin Herrenschmidt & Gavin Shan, IBM Corporation 2011. + * Copyright IBM Corporation 2001, 2005, 2006 + * Copyright Dave Engebretsen & Todd Inglett 2001 + * Copyright Linas Vepstas 2005, 2006 + */ + +#include <linux/atomic.h> +#include <linux/delay.h> +#include <linux/export.h> +#include <linux/init.h> +#include <linux/list.h> +#include <linux/of.h> +#include <linux/pci.h> +#include <linux/proc_fs.h> +#include <linux/rbtree.h> +#include <linux/sched.h> +#include <linux/seq_file.h> +#include <linux/spinlock.h> +#include <linux/crash_dump.h> + +#include <asm/eeh.h> +#include <asm/eeh_event.h> +#include <asm/io.h> +#include <asm/machdep.h> +#include <asm/ppc-pci.h> +#include <asm/rtas.h> + +/* RTAS tokens */ +static int ibm_set_eeh_option; +static int ibm_set_slot_reset; +static int ibm_read_slot_reset_state; +static int ibm_read_slot_reset_state2; +static int ibm_slot_error_detail; +static int ibm_get_config_addr_info; +static int ibm_get_config_addr_info2; +static int ibm_configure_pe; + +static void pseries_eeh_init_edev(struct pci_dn *pdn); + +static void pseries_pcibios_bus_add_device(struct pci_dev *pdev) +{ + struct pci_dn *pdn = pci_get_pdn(pdev); + + if (eeh_has_flag(EEH_FORCE_DISABLED)) + return; + + dev_dbg(&pdev->dev, "EEH: Setting up device\n"); +#ifdef CONFIG_PCI_IOV + if (pdev->is_virtfn) { + pdn->device_id = pdev->device; + pdn->vendor_id = pdev->vendor; + pdn->class_code = pdev->class; + /* + * Last allow unfreeze return code used for retrieval + * by user space in eeh-sysfs to show the last command + * completion from platform. + */ + pdn->last_allow_rc = 0; + } +#endif + pseries_eeh_init_edev(pdn); +#ifdef CONFIG_PCI_IOV + if (pdev->is_virtfn) { + /* + * FIXME: This really should be handled by choosing the right + * parent PE in pseries_eeh_init_edev(). + */ + struct eeh_pe *physfn_pe = pci_dev_to_eeh_dev(pdev->physfn)->pe; + struct eeh_dev *edev = pdn_to_eeh_dev(pdn); + + edev->pe_config_addr = (pdn->busno << 16) | (pdn->devfn << 8); + eeh_pe_tree_remove(edev); /* Remove as it is adding to bus pe */ + eeh_pe_tree_insert(edev, physfn_pe); /* Add as VF PE type */ + } +#endif + eeh_probe_device(pdev); +} + + +/** + * pseries_eeh_get_pe_config_addr - Find the pe_config_addr for a device + * @pdn: pci_dn of the input device + * + * The EEH RTAS calls use a tuple consisting of: (buid_hi, buid_lo, + * pe_config_addr) as a handle to a given PE. This function finds the + * pe_config_addr based on the device's config addr. + * + * Keep in mind that the pe_config_addr *might* be numerically identical to the + * device's config addr, but the two are conceptually distinct. + * + * Returns the pe_config_addr, or a negative error code. + */ +static int pseries_eeh_get_pe_config_addr(struct pci_dn *pdn) +{ + int config_addr = rtas_config_addr(pdn->busno, pdn->devfn, 0); + struct pci_controller *phb = pdn->phb; + int ret, rets[3]; + + if (ibm_get_config_addr_info2 != RTAS_UNKNOWN_SERVICE) { + /* + * First of all, use function 1 to determine if this device is + * part of a PE or not. ret[0] being zero indicates it's not. + */ + ret = rtas_call(ibm_get_config_addr_info2, 4, 2, rets, + config_addr, BUID_HI(phb->buid), + BUID_LO(phb->buid), 1); + if (ret || (rets[0] == 0)) + return -ENOENT; + + /* Retrieve the associated PE config address with function 0 */ + ret = rtas_call(ibm_get_config_addr_info2, 4, 2, rets, + config_addr, BUID_HI(phb->buid), + BUID_LO(phb->buid), 0); + if (ret) { + pr_warn("%s: Failed to get address for PHB#%x-PE#%x\n", + __func__, phb->global_number, config_addr); + return -ENXIO; + } + + return rets[0]; + } + + if (ibm_get_config_addr_info != RTAS_UNKNOWN_SERVICE) { + ret = rtas_call(ibm_get_config_addr_info, 4, 2, rets, + config_addr, BUID_HI(phb->buid), + BUID_LO(phb->buid), 0); + if (ret) { + pr_warn("%s: Failed to get address for PHB#%x-PE#%x\n", + __func__, phb->global_number, config_addr); + return -ENXIO; + } + + return rets[0]; + } + + /* + * PAPR does describe a process for finding the pe_config_addr that was + * used before the ibm,get-config-addr-info calls were added. However, + * I haven't found *any* systems that don't have that RTAS call + * implemented. If you happen to find one that needs the old DT based + * process, patches are welcome! + */ + return -ENOENT; +} + +/** + * pseries_eeh_phb_reset - Reset the specified PHB + * @phb: PCI controller + * @config_adddr: the associated config address + * @option: reset option + * + * Reset the specified PHB/PE + */ +static int pseries_eeh_phb_reset(struct pci_controller *phb, int config_addr, int option) +{ + int ret; + + /* Reset PE through RTAS call */ + ret = rtas_call(ibm_set_slot_reset, 4, 1, NULL, + config_addr, BUID_HI(phb->buid), + BUID_LO(phb->buid), option); + + /* If fundamental-reset not supported, try hot-reset */ + if (option == EEH_RESET_FUNDAMENTAL && ret == -8) { + option = EEH_RESET_HOT; + ret = rtas_call(ibm_set_slot_reset, 4, 1, NULL, + config_addr, BUID_HI(phb->buid), + BUID_LO(phb->buid), option); + } + + /* We need reset hold or settlement delay */ + if (option == EEH_RESET_FUNDAMENTAL || option == EEH_RESET_HOT) + msleep(EEH_PE_RST_HOLD_TIME); + else + msleep(EEH_PE_RST_SETTLE_TIME); + + return ret; +} + +/** + * pseries_eeh_phb_configure_bridge - Configure PCI bridges in the indicated PE + * @phb: PCI controller + * @config_adddr: the associated config address + * + * The function will be called to reconfigure the bridges included + * in the specified PE so that the mulfunctional PE would be recovered + * again. + */ +static int pseries_eeh_phb_configure_bridge(struct pci_controller *phb, int config_addr) +{ + int ret; + /* Waiting 0.2s maximum before skipping configuration */ + int max_wait = 200; + + while (max_wait > 0) { + ret = rtas_call(ibm_configure_pe, 3, 1, NULL, + config_addr, BUID_HI(phb->buid), + BUID_LO(phb->buid)); + + if (!ret) + return ret; + if (ret < 0) + break; + + /* + * If RTAS returns a delay value that's above 100ms, cut it + * down to 100ms in case firmware made a mistake. For more + * on how these delay values work see rtas_busy_delay_time + */ + if (ret > RTAS_EXTENDED_DELAY_MIN+2 && + ret <= RTAS_EXTENDED_DELAY_MAX) + ret = RTAS_EXTENDED_DELAY_MIN+2; + + max_wait -= rtas_busy_delay_time(ret); + + if (max_wait < 0) + break; + + rtas_busy_delay(ret); + } + + pr_warn("%s: Unable to configure bridge PHB#%x-PE#%x (%d)\n", + __func__, phb->global_number, config_addr, ret); + /* PAPR defines -3 as "Parameter Error" for this function: */ + if (ret == -3) + return -EINVAL; + else + return -EIO; +} + +/* + * Buffer for reporting slot-error-detail rtas calls. Its here + * in BSS, and not dynamically alloced, so that it ends up in + * RMO where RTAS can access it. + */ +static unsigned char slot_errbuf[RTAS_ERROR_LOG_MAX]; +static DEFINE_SPINLOCK(slot_errbuf_lock); +static int eeh_error_buf_size; + +static int pseries_eeh_cap_start(struct pci_dn *pdn) +{ + u32 status; + + if (!pdn) + return 0; + + rtas_read_config(pdn, PCI_STATUS, 2, &status); + if (!(status & PCI_STATUS_CAP_LIST)) + return 0; + + return PCI_CAPABILITY_LIST; +} + + +static int pseries_eeh_find_cap(struct pci_dn *pdn, int cap) +{ + int pos = pseries_eeh_cap_start(pdn); + int cnt = 48; /* Maximal number of capabilities */ + u32 id; + + if (!pos) + return 0; + + while (cnt--) { + rtas_read_config(pdn, pos, 1, &pos); + if (pos < 0x40) + break; + pos &= ~3; + rtas_read_config(pdn, pos + PCI_CAP_LIST_ID, 1, &id); + if (id == 0xff) + break; + if (id == cap) + return pos; + pos += PCI_CAP_LIST_NEXT; + } + + return 0; +} + +static int pseries_eeh_find_ecap(struct pci_dn *pdn, int cap) +{ + struct eeh_dev *edev = pdn_to_eeh_dev(pdn); + u32 header; + int pos = 256; + int ttl = (4096 - 256) / 8; + + if (!edev || !edev->pcie_cap) + return 0; + if (rtas_read_config(pdn, pos, 4, &header) != PCIBIOS_SUCCESSFUL) + return 0; + else if (!header) + return 0; + + while (ttl-- > 0) { + if (PCI_EXT_CAP_ID(header) == cap && pos) + return pos; + + pos = PCI_EXT_CAP_NEXT(header); + if (pos < 256) + break; + + if (rtas_read_config(pdn, pos, 4, &header) != PCIBIOS_SUCCESSFUL) + break; + } + + return 0; +} + +/** + * pseries_eeh_pe_get_parent - Retrieve the parent PE + * @edev: EEH device + * + * The whole PEs existing in the system are organized as hierarchy + * tree. The function is used to retrieve the parent PE according + * to the parent EEH device. + */ +static struct eeh_pe *pseries_eeh_pe_get_parent(struct eeh_dev *edev) +{ + struct eeh_dev *parent; + struct pci_dn *pdn = eeh_dev_to_pdn(edev); + + /* + * It might have the case for the indirect parent + * EEH device already having associated PE, but + * the direct parent EEH device doesn't have yet. + */ + if (edev->physfn) + pdn = pci_get_pdn(edev->physfn); + else + pdn = pdn ? pdn->parent : NULL; + while (pdn) { + /* We're poking out of PCI territory */ + parent = pdn_to_eeh_dev(pdn); + if (!parent) + return NULL; + + if (parent->pe) + return parent->pe; + + pdn = pdn->parent; + } + + return NULL; +} + +/** + * pseries_eeh_init_edev - initialise the eeh_dev and eeh_pe for a pci_dn + * + * @pdn: PCI device node + * + * When we discover a new PCI device via the device-tree we create a + * corresponding pci_dn and we allocate, but don't initialise, an eeh_dev. + * This function takes care of the initialisation and inserts the eeh_dev + * into the correct eeh_pe. If no eeh_pe exists we'll allocate one. + */ +static void pseries_eeh_init_edev(struct pci_dn *pdn) +{ + struct eeh_pe pe, *parent; + struct eeh_dev *edev; + u32 pcie_flags; + int ret; + + if (WARN_ON_ONCE(!eeh_has_flag(EEH_PROBE_MODE_DEVTREE))) + return; + + /* + * Find the eeh_dev for this pdn. The storage for the eeh_dev was + * allocated at the same time as the pci_dn. + * + * XXX: We should probably re-visit that. + */ + edev = pdn_to_eeh_dev(pdn); + if (!edev) + return; + + /* + * If ->pe is set then we've already probed this device. We hit + * this path when a pci_dev is removed and rescanned while recovering + * a PE (i.e. for devices where the driver doesn't support error + * recovery). + */ + if (edev->pe) + return; + + /* Check class/vendor/device IDs */ + if (!pdn->vendor_id || !pdn->device_id || !pdn->class_code) + return; + + /* Skip for PCI-ISA bridge */ + if ((pdn->class_code >> 8) == PCI_CLASS_BRIDGE_ISA) + return; + + eeh_edev_dbg(edev, "Probing device\n"); + + /* + * Update class code and mode of eeh device. We need + * correctly reflects that current device is root port + * or PCIe switch downstream port. + */ + edev->pcix_cap = pseries_eeh_find_cap(pdn, PCI_CAP_ID_PCIX); + edev->pcie_cap = pseries_eeh_find_cap(pdn, PCI_CAP_ID_EXP); + edev->aer_cap = pseries_eeh_find_ecap(pdn, PCI_EXT_CAP_ID_ERR); + edev->mode &= 0xFFFFFF00; + if ((pdn->class_code >> 8) == PCI_CLASS_BRIDGE_PCI) { + edev->mode |= EEH_DEV_BRIDGE; + if (edev->pcie_cap) { + rtas_read_config(pdn, edev->pcie_cap + PCI_EXP_FLAGS, + 2, &pcie_flags); + pcie_flags = (pcie_flags & PCI_EXP_FLAGS_TYPE) >> 4; + if (pcie_flags == PCI_EXP_TYPE_ROOT_PORT) + edev->mode |= EEH_DEV_ROOT_PORT; + else if (pcie_flags == PCI_EXP_TYPE_DOWNSTREAM) + edev->mode |= EEH_DEV_DS_PORT; + } + } + + /* first up, find the pe_config_addr for the PE containing the device */ + ret = pseries_eeh_get_pe_config_addr(pdn); + if (ret < 0) { + eeh_edev_dbg(edev, "Unable to find pe_config_addr\n"); + goto err; + } + + /* Try enable EEH on the fake PE */ + memset(&pe, 0, sizeof(struct eeh_pe)); + pe.phb = pdn->phb; + pe.addr = ret; + + eeh_edev_dbg(edev, "Enabling EEH on device\n"); + ret = eeh_ops->set_option(&pe, EEH_OPT_ENABLE); + if (ret) { + eeh_edev_dbg(edev, "EEH failed to enable on device (code %d)\n", ret); + goto err; + } + + edev->pe_config_addr = pe.addr; + + eeh_add_flag(EEH_ENABLED); + + parent = pseries_eeh_pe_get_parent(edev); + eeh_pe_tree_insert(edev, parent); + eeh_save_bars(edev); + eeh_edev_dbg(edev, "EEH enabled for device"); + + return; + +err: + eeh_edev_dbg(edev, "EEH is unsupported on device (code = %d)\n", ret); +} + +static struct eeh_dev *pseries_eeh_probe(struct pci_dev *pdev) +{ + struct eeh_dev *edev; + struct pci_dn *pdn; + + pdn = pci_get_pdn_by_devfn(pdev->bus, pdev->devfn); + if (!pdn) + return NULL; + + /* + * If the system supports EEH on this device then the eeh_dev was + * configured and inserted into a PE in pseries_eeh_init_edev() + */ + edev = pdn_to_eeh_dev(pdn); + if (!edev || !edev->pe) + return NULL; + + return edev; +} + +/** + * pseries_eeh_init_edev_recursive - Enable EEH for the indicated device + * @pdn: PCI device node + * + * This routine must be used to perform EEH initialization for the + * indicated PCI device that was added after system boot (e.g. + * hotplug, dlpar). + */ +void pseries_eeh_init_edev_recursive(struct pci_dn *pdn) +{ + struct pci_dn *n; + + if (!pdn) + return; + + list_for_each_entry(n, &pdn->child_list, list) + pseries_eeh_init_edev_recursive(n); + + pseries_eeh_init_edev(pdn); +} +EXPORT_SYMBOL_GPL(pseries_eeh_init_edev_recursive); + +/** + * pseries_eeh_set_option - Initialize EEH or MMIO/DMA reenable + * @pe: EEH PE + * @option: operation to be issued + * + * The function is used to control the EEH functionality globally. + * Currently, following options are support according to PAPR: + * Enable EEH, Disable EEH, Enable MMIO and Enable DMA + */ +static int pseries_eeh_set_option(struct eeh_pe *pe, int option) +{ + int ret = 0; + + /* + * When we're enabling or disabling EEH functionality on + * the particular PE, the PE config address is possibly + * unavailable. Therefore, we have to figure it out from + * the FDT node. + */ + switch (option) { + case EEH_OPT_DISABLE: + case EEH_OPT_ENABLE: + case EEH_OPT_THAW_MMIO: + case EEH_OPT_THAW_DMA: + break; + case EEH_OPT_FREEZE_PE: + /* Not support */ + return 0; + default: + pr_err("%s: Invalid option %d\n", __func__, option); + return -EINVAL; + } + + ret = rtas_call(ibm_set_eeh_option, 4, 1, NULL, + pe->addr, BUID_HI(pe->phb->buid), + BUID_LO(pe->phb->buid), option); + + return ret; +} + +/** + * pseries_eeh_get_state - Retrieve PE state + * @pe: EEH PE + * @delay: suggested time to wait if state is unavailable + * + * Retrieve the state of the specified PE. On RTAS compliant + * pseries platform, there already has one dedicated RTAS function + * for the purpose. It's notable that the associated PE config address + * might be ready when calling the function. Therefore, endeavour to + * use the PE config address if possible. Further more, there're 2 + * RTAS calls for the purpose, we need to try the new one and back + * to the old one if the new one couldn't work properly. + */ +static int pseries_eeh_get_state(struct eeh_pe *pe, int *delay) +{ + int ret; + int rets[4]; + int result; + + if (ibm_read_slot_reset_state2 != RTAS_UNKNOWN_SERVICE) { + ret = rtas_call(ibm_read_slot_reset_state2, 3, 4, rets, + pe->addr, BUID_HI(pe->phb->buid), + BUID_LO(pe->phb->buid)); + } else if (ibm_read_slot_reset_state != RTAS_UNKNOWN_SERVICE) { + /* Fake PE unavailable info */ + rets[2] = 0; + ret = rtas_call(ibm_read_slot_reset_state, 3, 3, rets, + pe->addr, BUID_HI(pe->phb->buid), + BUID_LO(pe->phb->buid)); + } else { + return EEH_STATE_NOT_SUPPORT; + } + + if (ret) + return ret; + + /* Parse the result out */ + if (!rets[1]) + return EEH_STATE_NOT_SUPPORT; + + switch(rets[0]) { + case 0: + result = EEH_STATE_MMIO_ACTIVE | + EEH_STATE_DMA_ACTIVE; + break; + case 1: + result = EEH_STATE_RESET_ACTIVE | + EEH_STATE_MMIO_ACTIVE | + EEH_STATE_DMA_ACTIVE; + break; + case 2: + result = 0; + break; + case 4: + result = EEH_STATE_MMIO_ENABLED; + break; + case 5: + if (rets[2]) { + if (delay) + *delay = rets[2]; + result = EEH_STATE_UNAVAILABLE; + } else { + result = EEH_STATE_NOT_SUPPORT; + } + break; + default: + result = EEH_STATE_NOT_SUPPORT; + } + + return result; +} + +/** + * pseries_eeh_reset - Reset the specified PE + * @pe: EEH PE + * @option: reset option + * + * Reset the specified PE + */ +static int pseries_eeh_reset(struct eeh_pe *pe, int option) +{ + return pseries_eeh_phb_reset(pe->phb, pe->addr, option); +} + +/** + * pseries_eeh_get_log - Retrieve error log + * @pe: EEH PE + * @severity: temporary or permanent error log + * @drv_log: driver log to be combined with retrieved error log + * @len: length of driver log + * + * Retrieve the temporary or permanent error from the PE. + * Actually, the error will be retrieved through the dedicated + * RTAS call. + */ +static int pseries_eeh_get_log(struct eeh_pe *pe, int severity, char *drv_log, unsigned long len) +{ + unsigned long flags; + int ret; + + spin_lock_irqsave(&slot_errbuf_lock, flags); + memset(slot_errbuf, 0, eeh_error_buf_size); + + ret = rtas_call(ibm_slot_error_detail, 8, 1, NULL, pe->addr, + BUID_HI(pe->phb->buid), BUID_LO(pe->phb->buid), + virt_to_phys(drv_log), len, + virt_to_phys(slot_errbuf), eeh_error_buf_size, + severity); + if (!ret) + log_error(slot_errbuf, ERR_TYPE_RTAS_LOG, 0); + spin_unlock_irqrestore(&slot_errbuf_lock, flags); + + return ret; +} + +/** + * pseries_eeh_configure_bridge - Configure PCI bridges in the indicated PE + * @pe: EEH PE + * + */ +static int pseries_eeh_configure_bridge(struct eeh_pe *pe) +{ + return pseries_eeh_phb_configure_bridge(pe->phb, pe->addr); +} + +/** + * pseries_eeh_read_config - Read PCI config space + * @edev: EEH device handle + * @where: PCI config space offset + * @size: size to read + * @val: return value + * + * Read config space from the speicifed device + */ +static int pseries_eeh_read_config(struct eeh_dev *edev, int where, int size, u32 *val) +{ + struct pci_dn *pdn = eeh_dev_to_pdn(edev); + + return rtas_read_config(pdn, where, size, val); +} + +/** + * pseries_eeh_write_config - Write PCI config space + * @edev: EEH device handle + * @where: PCI config space offset + * @size: size to write + * @val: value to be written + * + * Write config space to the specified device + */ +static int pseries_eeh_write_config(struct eeh_dev *edev, int where, int size, u32 val) +{ + struct pci_dn *pdn = eeh_dev_to_pdn(edev); + + return rtas_write_config(pdn, where, size, val); +} + +#ifdef CONFIG_PCI_IOV +static int pseries_send_allow_unfreeze(struct pci_dn *pdn, u16 *vf_pe_array, int cur_vfs) +{ + int rc; + int ibm_allow_unfreeze = rtas_token("ibm,open-sriov-allow-unfreeze"); + unsigned long buid, addr; + + addr = rtas_config_addr(pdn->busno, pdn->devfn, 0); + buid = pdn->phb->buid; + spin_lock(&rtas_data_buf_lock); + memcpy(rtas_data_buf, vf_pe_array, RTAS_DATA_BUF_SIZE); + rc = rtas_call(ibm_allow_unfreeze, 5, 1, NULL, + addr, + BUID_HI(buid), + BUID_LO(buid), + rtas_data_buf, cur_vfs * sizeof(u16)); + spin_unlock(&rtas_data_buf_lock); + if (rc) + pr_warn("%s: Failed to allow unfreeze for PHB#%x-PE#%lx, rc=%x\n", + __func__, + pdn->phb->global_number, addr, rc); + return rc; +} + +static int pseries_call_allow_unfreeze(struct eeh_dev *edev) +{ + int cur_vfs = 0, rc = 0, vf_index, bus, devfn, vf_pe_num; + struct pci_dn *pdn, *tmp, *parent, *physfn_pdn; + u16 *vf_pe_array; + + vf_pe_array = kzalloc(RTAS_DATA_BUF_SIZE, GFP_KERNEL); + if (!vf_pe_array) + return -ENOMEM; + if (pci_num_vf(edev->physfn ? edev->physfn : edev->pdev)) { + if (edev->pdev->is_physfn) { + cur_vfs = pci_num_vf(edev->pdev); + pdn = eeh_dev_to_pdn(edev); + parent = pdn->parent; + for (vf_index = 0; vf_index < cur_vfs; vf_index++) + vf_pe_array[vf_index] = + cpu_to_be16(pdn->pe_num_map[vf_index]); + rc = pseries_send_allow_unfreeze(pdn, vf_pe_array, + cur_vfs); + pdn->last_allow_rc = rc; + for (vf_index = 0; vf_index < cur_vfs; vf_index++) { + list_for_each_entry_safe(pdn, tmp, + &parent->child_list, + list) { + bus = pci_iov_virtfn_bus(edev->pdev, + vf_index); + devfn = pci_iov_virtfn_devfn(edev->pdev, + vf_index); + if (pdn->busno != bus || + pdn->devfn != devfn) + continue; + pdn->last_allow_rc = rc; + } + } + } else { + pdn = pci_get_pdn(edev->pdev); + physfn_pdn = pci_get_pdn(edev->physfn); + + vf_pe_num = physfn_pdn->pe_num_map[edev->vf_index]; + vf_pe_array[0] = cpu_to_be16(vf_pe_num); + rc = pseries_send_allow_unfreeze(physfn_pdn, + vf_pe_array, 1); + pdn->last_allow_rc = rc; + } + } + + kfree(vf_pe_array); + return rc; +} + +static int pseries_notify_resume(struct eeh_dev *edev) +{ + if (!edev) + return -EEXIST; + + if (rtas_token("ibm,open-sriov-allow-unfreeze") == RTAS_UNKNOWN_SERVICE) + return -EINVAL; + + if (edev->pdev->is_physfn || edev->pdev->is_virtfn) + return pseries_call_allow_unfreeze(edev); + + return 0; +} +#endif + +static struct eeh_ops pseries_eeh_ops = { + .name = "pseries", + .probe = pseries_eeh_probe, + .set_option = pseries_eeh_set_option, + .get_state = pseries_eeh_get_state, + .reset = pseries_eeh_reset, + .get_log = pseries_eeh_get_log, + .configure_bridge = pseries_eeh_configure_bridge, + .err_inject = NULL, + .read_config = pseries_eeh_read_config, + .write_config = pseries_eeh_write_config, + .next_error = NULL, + .restore_config = NULL, /* NB: configure_bridge() does this */ +#ifdef CONFIG_PCI_IOV + .notify_resume = pseries_notify_resume +#endif +}; + +/** + * eeh_pseries_init - Register platform dependent EEH operations + * + * EEH initialization on pseries platform. This function should be + * called before any EEH related functions. + */ +static int __init eeh_pseries_init(void) +{ + struct pci_controller *phb; + struct pci_dn *pdn; + int ret, config_addr; + + /* figure out EEH RTAS function call tokens */ + ibm_set_eeh_option = rtas_token("ibm,set-eeh-option"); + ibm_set_slot_reset = rtas_token("ibm,set-slot-reset"); + ibm_read_slot_reset_state2 = rtas_token("ibm,read-slot-reset-state2"); + ibm_read_slot_reset_state = rtas_token("ibm,read-slot-reset-state"); + ibm_slot_error_detail = rtas_token("ibm,slot-error-detail"); + ibm_get_config_addr_info2 = rtas_token("ibm,get-config-addr-info2"); + ibm_get_config_addr_info = rtas_token("ibm,get-config-addr-info"); + ibm_configure_pe = rtas_token("ibm,configure-pe"); + + /* + * ibm,configure-pe and ibm,configure-bridge have the same semantics, + * however ibm,configure-pe can be faster. If we can't find + * ibm,configure-pe then fall back to using ibm,configure-bridge. + */ + if (ibm_configure_pe == RTAS_UNKNOWN_SERVICE) + ibm_configure_pe = rtas_token("ibm,configure-bridge"); + + /* + * Necessary sanity check. We needn't check "get-config-addr-info" + * and its variant since the old firmware probably support address + * of domain/bus/slot/function for EEH RTAS operations. + */ + if (ibm_set_eeh_option == RTAS_UNKNOWN_SERVICE || + ibm_set_slot_reset == RTAS_UNKNOWN_SERVICE || + (ibm_read_slot_reset_state2 == RTAS_UNKNOWN_SERVICE && + ibm_read_slot_reset_state == RTAS_UNKNOWN_SERVICE) || + ibm_slot_error_detail == RTAS_UNKNOWN_SERVICE || + ibm_configure_pe == RTAS_UNKNOWN_SERVICE) { + pr_info("EEH functionality not supported\n"); + return -EINVAL; + } + + /* Initialize error log size */ + eeh_error_buf_size = rtas_get_error_log_max(); + + /* Set EEH probe mode */ + eeh_add_flag(EEH_PROBE_MODE_DEVTREE | EEH_ENABLE_IO_FOR_LOG); + + /* Set EEH machine dependent code */ + ppc_md.pcibios_bus_add_device = pseries_pcibios_bus_add_device; + + if (is_kdump_kernel() || reset_devices) { + pr_info("Issue PHB reset ...\n"); + list_for_each_entry(phb, &hose_list, list_node) { + // Skip if the slot is empty + if (list_empty(&PCI_DN(phb->dn)->child_list)) + continue; + + pdn = list_first_entry(&PCI_DN(phb->dn)->child_list, struct pci_dn, list); + config_addr = pseries_eeh_get_pe_config_addr(pdn); + + /* invalid PE config addr */ + if (config_addr < 0) + continue; + + pseries_eeh_phb_reset(phb, config_addr, EEH_RESET_FUNDAMENTAL); + pseries_eeh_phb_reset(phb, config_addr, EEH_RESET_DEACTIVATE); + pseries_eeh_phb_configure_bridge(phb, config_addr); + } + } + + ret = eeh_init(&pseries_eeh_ops); + if (!ret) + pr_info("EEH: pSeries platform initialized\n"); + else + pr_info("EEH: pSeries platform initialization failure (%d)\n", + ret); + return ret; +} +machine_arch_initcall(pseries, eeh_pseries_init); |