summaryrefslogtreecommitdiffstats
path: root/arch/powerpc/platforms/pseries/rtas-fadump.h
diff options
context:
space:
mode:
Diffstat (limited to '')
-rw-r--r--arch/powerpc/platforms/pseries/rtas-fadump.h114
1 files changed, 114 insertions, 0 deletions
diff --git a/arch/powerpc/platforms/pseries/rtas-fadump.h b/arch/powerpc/platforms/pseries/rtas-fadump.h
new file mode 100644
index 000000000..fd59bd7ca
--- /dev/null
+++ b/arch/powerpc/platforms/pseries/rtas-fadump.h
@@ -0,0 +1,114 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Firmware-Assisted Dump support on POWERVM platform.
+ *
+ * Copyright 2011, Mahesh Salgaonkar, IBM Corporation.
+ * Copyright 2019, Hari Bathini, IBM Corporation.
+ */
+
+#ifndef _PSERIES_RTAS_FADUMP_H
+#define _PSERIES_RTAS_FADUMP_H
+
+/*
+ * On some Power systems where RMO is 128MB, it still requires minimum of
+ * 256MB for kernel to boot successfully. When kdump infrastructure is
+ * configured to save vmcore over network, we run into OOM issue while
+ * loading modules related to network setup. Hence we need additional 64M
+ * of memory to avoid OOM issue.
+ */
+#define RTAS_FADUMP_MIN_BOOT_MEM ((0x1UL << 28) + (0x1UL << 26))
+
+/* Firmware provided dump sections */
+#define RTAS_FADUMP_CPU_STATE_DATA 0x0001
+#define RTAS_FADUMP_HPTE_REGION 0x0002
+#define RTAS_FADUMP_REAL_MODE_REGION 0x0011
+
+/* Dump request flag */
+#define RTAS_FADUMP_REQUEST_FLAG 0x00000001
+
+/* Dump status flag */
+#define RTAS_FADUMP_ERROR_FLAG 0x2000
+
+/* Kernel Dump section info */
+struct rtas_fadump_section {
+ __be32 request_flag;
+ __be16 source_data_type;
+ __be16 error_flags;
+ __be64 source_address;
+ __be64 source_len;
+ __be64 bytes_dumped;
+ __be64 destination_address;
+};
+
+/* ibm,configure-kernel-dump header. */
+struct rtas_fadump_section_header {
+ __be32 dump_format_version;
+ __be16 dump_num_sections;
+ __be16 dump_status_flag;
+ __be32 offset_first_dump_section;
+
+ /* Fields for disk dump option. */
+ __be32 dd_block_size;
+ __be64 dd_block_offset;
+ __be64 dd_num_blocks;
+ __be32 dd_offset_disk_path;
+
+ /* Maximum time allowed to prevent an automatic dump-reboot. */
+ __be32 max_time_auto;
+};
+
+/*
+ * Firmware Assisted dump memory structure. This structure is required for
+ * registering future kernel dump with power firmware through rtas call.
+ *
+ * No disk dump option. Hence disk dump path string section is not included.
+ */
+struct rtas_fadump_mem_struct {
+ struct rtas_fadump_section_header header;
+
+ /* Kernel dump sections */
+ struct rtas_fadump_section cpu_state_data;
+ struct rtas_fadump_section hpte_region;
+
+ /*
+ * TODO: Extend multiple boot memory regions support in the kernel
+ * for this platform.
+ */
+ struct rtas_fadump_section rmr_region;
+};
+
+/*
+ * The firmware-assisted dump format.
+ *
+ * The register save area is an area in the partition's memory used to preserve
+ * the register contents (CPU state data) for the active CPUs during a firmware
+ * assisted dump. The dump format contains register save area header followed
+ * by register entries. Each list of registers for a CPU starts with "CPUSTRT"
+ * and ends with "CPUEND".
+ */
+
+/* Register save area header. */
+struct rtas_fadump_reg_save_area_header {
+ __be64 magic_number;
+ __be32 version;
+ __be32 num_cpu_offset;
+};
+
+/* Register entry. */
+struct rtas_fadump_reg_entry {
+ __be64 reg_id;
+ __be64 reg_value;
+};
+
+/* Utility macros */
+#define RTAS_FADUMP_SKIP_TO_NEXT_CPU(reg_entry) \
+({ \
+ while (be64_to_cpu(reg_entry->reg_id) != \
+ fadump_str_to_u64("CPUEND")) \
+ reg_entry++; \
+ reg_entry++; \
+})
+
+#define RTAS_FADUMP_CPU_ID_MASK ((1UL << 32) - 1)
+
+#endif /* _PSERIES_RTAS_FADUMP_H */