diff options
Diffstat (limited to '')
| -rw-r--r-- | arch/powerpc/sysdev/fsl_pci.c | 1353 |
1 files changed, 1353 insertions, 0 deletions
diff --git a/arch/powerpc/sysdev/fsl_pci.c b/arch/powerpc/sysdev/fsl_pci.c new file mode 100644 index 000000000..974d3db6f --- /dev/null +++ b/arch/powerpc/sysdev/fsl_pci.c @@ -0,0 +1,1353 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * MPC83xx/85xx/86xx PCI/PCIE support routing. + * + * Copyright 2007-2012 Freescale Semiconductor, Inc. + * Copyright 2008-2009 MontaVista Software, Inc. + * + * Initial author: Xianghua Xiao <x.xiao@freescale.com> + * Recode: ZHANG WEI <wei.zhang@freescale.com> + * Rewrite the routing for Frescale PCI and PCI Express + * Roy Zang <tie-fei.zang@freescale.com> + * MPC83xx PCI-Express support: + * Tony Li <tony.li@freescale.com> + * Anton Vorontsov <avorontsov@ru.mvista.com> + */ +#include <linux/kernel.h> +#include <linux/pci.h> +#include <linux/delay.h> +#include <linux/string.h> +#include <linux/fsl/edac.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/memblock.h> +#include <linux/log2.h> +#include <linux/of_address.h> +#include <linux/of_irq.h> +#include <linux/platform_device.h> +#include <linux/slab.h> +#include <linux/suspend.h> +#include <linux/syscore_ops.h> +#include <linux/uaccess.h> + +#include <asm/io.h> +#include <asm/pci-bridge.h> +#include <asm/ppc-pci.h> +#include <asm/machdep.h> +#include <asm/mpc85xx.h> +#include <asm/disassemble.h> +#include <asm/ppc-opcode.h> +#include <asm/swiotlb.h> +#include <asm/setup.h> +#include <sysdev/fsl_soc.h> +#include <sysdev/fsl_pci.h> + +static int fsl_pcie_bus_fixup, is_mpc83xx_pci; + +static void quirk_fsl_pcie_early(struct pci_dev *dev) +{ + u8 hdr_type; + + /* if we aren't a PCIe don't bother */ + if (!pci_is_pcie(dev)) + return; + + /* if we aren't in host mode don't bother */ + pci_read_config_byte(dev, PCI_HEADER_TYPE, &hdr_type); + if ((hdr_type & 0x7f) != PCI_HEADER_TYPE_BRIDGE) + return; + + dev->class = PCI_CLASS_BRIDGE_PCI_NORMAL; + fsl_pcie_bus_fixup = 1; + return; +} + +static int fsl_indirect_read_config(struct pci_bus *, unsigned int, + int, int, u32 *); + +static int fsl_pcie_check_link(struct pci_controller *hose) +{ + u32 val = 0; + + if (hose->indirect_type & PPC_INDIRECT_TYPE_FSL_CFG_REG_LINK) { + if (hose->ops->read == fsl_indirect_read_config) + __indirect_read_config(hose, hose->first_busno, 0, + PCIE_LTSSM, 4, &val); + else + early_read_config_dword(hose, 0, 0, PCIE_LTSSM, &val); + if (val < PCIE_LTSSM_L0) + return 1; + } else { + struct ccsr_pci __iomem *pci = hose->private_data; + /* for PCIe IP rev 3.0 or greater use CSR0 for link state */ + val = (in_be32(&pci->pex_csr0) & PEX_CSR0_LTSSM_MASK) + >> PEX_CSR0_LTSSM_SHIFT; + if (val != PEX_CSR0_LTSSM_L0) + return 1; + } + + return 0; +} + +static int fsl_indirect_read_config(struct pci_bus *bus, unsigned int devfn, + int offset, int len, u32 *val) +{ + struct pci_controller *hose = pci_bus_to_host(bus); + + if (fsl_pcie_check_link(hose)) + hose->indirect_type |= PPC_INDIRECT_TYPE_NO_PCIE_LINK; + else + hose->indirect_type &= ~PPC_INDIRECT_TYPE_NO_PCIE_LINK; + + return indirect_read_config(bus, devfn, offset, len, val); +} + +#if defined(CONFIG_FSL_SOC_BOOKE) || defined(CONFIG_PPC_86xx) + +static struct pci_ops fsl_indirect_pcie_ops = +{ + .read = fsl_indirect_read_config, + .write = indirect_write_config, +}; + +static u64 pci64_dma_offset; + +#ifdef CONFIG_SWIOTLB +static void pci_dma_dev_setup_swiotlb(struct pci_dev *pdev) +{ + struct pci_controller *hose = pci_bus_to_host(pdev->bus); + + pdev->dev.bus_dma_limit = + hose->dma_window_base_cur + hose->dma_window_size - 1; +} + +static void setup_swiotlb_ops(struct pci_controller *hose) +{ + if (ppc_swiotlb_enable) + hose->controller_ops.dma_dev_setup = pci_dma_dev_setup_swiotlb; +} +#else +static inline void setup_swiotlb_ops(struct pci_controller *hose) {} +#endif + +static void fsl_pci_dma_set_mask(struct device *dev, u64 dma_mask) +{ + /* + * Fix up PCI devices that are able to DMA to the large inbound + * mapping that allows addressing any RAM address from across PCI. + */ + if (dev_is_pci(dev) && dma_mask >= pci64_dma_offset * 2 - 1) { + dev->bus_dma_limit = 0; + dev->archdata.dma_offset = pci64_dma_offset; + } +} + +static int setup_one_atmu(struct ccsr_pci __iomem *pci, + unsigned int index, const struct resource *res, + resource_size_t offset) +{ + resource_size_t pci_addr = res->start - offset; + resource_size_t phys_addr = res->start; + resource_size_t size = resource_size(res); + u32 flags = 0x80044000; /* enable & mem R/W */ + unsigned int i; + + pr_debug("PCI MEM resource start 0x%016llx, size 0x%016llx.\n", + (u64)res->start, (u64)size); + + if (res->flags & IORESOURCE_PREFETCH) + flags |= 0x10000000; /* enable relaxed ordering */ + + for (i = 0; size > 0; i++) { + unsigned int bits = min_t(u32, ilog2(size), + __ffs(pci_addr | phys_addr)); + + if (index + i >= 5) + return -1; + + out_be32(&pci->pow[index + i].potar, pci_addr >> 12); + out_be32(&pci->pow[index + i].potear, (u64)pci_addr >> 44); + out_be32(&pci->pow[index + i].powbar, phys_addr >> 12); + out_be32(&pci->pow[index + i].powar, flags | (bits - 1)); + + pci_addr += (resource_size_t)1U << bits; + phys_addr += (resource_size_t)1U << bits; + size -= (resource_size_t)1U << bits; + } + + return i; +} + +static bool is_kdump(void) +{ + struct device_node *node; + bool ret; + + node = of_find_node_by_type(NULL, "memory"); + if (!node) { + WARN_ON_ONCE(1); + return false; + } + + ret = of_property_read_bool(node, "linux,usable-memory"); + of_node_put(node); + + return ret; +} + +/* atmu setup for fsl pci/pcie controller */ +static void setup_pci_atmu(struct pci_controller *hose) +{ + struct ccsr_pci __iomem *pci = hose->private_data; + int i, j, n, mem_log, win_idx = 3, start_idx = 1, end_idx = 4; + u64 mem, sz, paddr_hi = 0; + u64 offset = 0, paddr_lo = ULLONG_MAX; + u32 pcicsrbar = 0, pcicsrbar_sz; + u32 piwar = PIWAR_EN | PIWAR_PF | PIWAR_TGI_LOCAL | + PIWAR_READ_SNOOP | PIWAR_WRITE_SNOOP; + const u64 *reg; + int len; + bool setup_inbound; + + /* + * If this is kdump, we don't want to trigger a bunch of PCI + * errors by closing the window on in-flight DMA. + * + * We still run most of the function's logic so that things like + * hose->dma_window_size still get set. + */ + setup_inbound = !is_kdump(); + + if (of_device_is_compatible(hose->dn, "fsl,bsc9132-pcie")) { + /* + * BSC9132 Rev1.0 has an issue where all the PEX inbound + * windows have implemented the default target value as 0xf + * for CCSR space.In all Freescale legacy devices the target + * of 0xf is reserved for local memory space. 9132 Rev1.0 + * now has local memory space mapped to target 0x0 instead of + * 0xf. Hence adding a workaround to remove the target 0xf + * defined for memory space from Inbound window attributes. + */ + piwar &= ~PIWAR_TGI_LOCAL; + } + + if (early_find_capability(hose, 0, 0, PCI_CAP_ID_EXP)) { + if (in_be32(&pci->block_rev1) >= PCIE_IP_REV_2_2) { + win_idx = 2; + start_idx = 0; + end_idx = 3; + } + } + + /* Disable all windows (except powar0 since it's ignored) */ + for(i = 1; i < 5; i++) + out_be32(&pci->pow[i].powar, 0); + + if (setup_inbound) { + for (i = start_idx; i < end_idx; i++) + out_be32(&pci->piw[i].piwar, 0); + } + + /* Setup outbound MEM window */ + for(i = 0, j = 1; i < 3; i++) { + if (!(hose->mem_resources[i].flags & IORESOURCE_MEM)) + continue; + + paddr_lo = min(paddr_lo, (u64)hose->mem_resources[i].start); + paddr_hi = max(paddr_hi, (u64)hose->mem_resources[i].end); + + /* We assume all memory resources have the same offset */ + offset = hose->mem_offset[i]; + n = setup_one_atmu(pci, j, &hose->mem_resources[i], offset); + + if (n < 0 || j >= 5) { + pr_err("Ran out of outbound PCI ATMUs for resource %d!\n", i); + hose->mem_resources[i].flags |= IORESOURCE_DISABLED; + } else + j += n; + } + + /* Setup outbound IO window */ + if (hose->io_resource.flags & IORESOURCE_IO) { + if (j >= 5) { + pr_err("Ran out of outbound PCI ATMUs for IO resource\n"); + } else { + pr_debug("PCI IO resource start 0x%016llx, size 0x%016llx, " + "phy base 0x%016llx.\n", + (u64)hose->io_resource.start, + (u64)resource_size(&hose->io_resource), + (u64)hose->io_base_phys); + out_be32(&pci->pow[j].potar, (hose->io_resource.start >> 12)); + out_be32(&pci->pow[j].potear, 0); + out_be32(&pci->pow[j].powbar, (hose->io_base_phys >> 12)); + /* Enable, IO R/W */ + out_be32(&pci->pow[j].powar, 0x80088000 + | (ilog2(hose->io_resource.end + - hose->io_resource.start + 1) - 1)); + } + } + + /* convert to pci address space */ + paddr_hi -= offset; + paddr_lo -= offset; + + if (paddr_hi == paddr_lo) { + pr_err("%pOF: No outbound window space\n", hose->dn); + return; + } + + if (paddr_lo == 0) { + pr_err("%pOF: No space for inbound window\n", hose->dn); + return; + } + + /* setup PCSRBAR/PEXCSRBAR */ + early_write_config_dword(hose, 0, 0, PCI_BASE_ADDRESS_0, 0xffffffff); + early_read_config_dword(hose, 0, 0, PCI_BASE_ADDRESS_0, &pcicsrbar_sz); + pcicsrbar_sz = ~pcicsrbar_sz + 1; + + if (paddr_hi < (0x100000000ull - pcicsrbar_sz) || + (paddr_lo > 0x100000000ull)) + pcicsrbar = 0x100000000ull - pcicsrbar_sz; + else + pcicsrbar = (paddr_lo - pcicsrbar_sz) & -pcicsrbar_sz; + early_write_config_dword(hose, 0, 0, PCI_BASE_ADDRESS_0, pcicsrbar); + + paddr_lo = min(paddr_lo, (u64)pcicsrbar); + + pr_info("%pOF: PCICSRBAR @ 0x%x\n", hose->dn, pcicsrbar); + + /* Setup inbound mem window */ + mem = memblock_end_of_DRAM(); + pr_info("%s: end of DRAM %llx\n", __func__, mem); + + /* + * The msi-address-64 property, if it exists, indicates the physical + * address of the MSIIR register. Normally, this register is located + * inside CCSR, so the ATMU that covers all of CCSR is used. But if + * this property exists, then we normally need to create a new ATMU + * for it. For now, however, we cheat. The only entity that creates + * this property is the Freescale hypervisor, and the address is + * specified in the partition configuration. Typically, the address + * is located in the page immediately after the end of DDR. If so, we + * can avoid allocating a new ATMU by extending the DDR ATMU by one + * page. + */ + reg = of_get_property(hose->dn, "msi-address-64", &len); + if (reg && (len == sizeof(u64))) { + u64 address = be64_to_cpup(reg); + + if ((address >= mem) && (address < (mem + PAGE_SIZE))) { + pr_info("%pOF: extending DDR ATMU to cover MSIIR", hose->dn); + mem += PAGE_SIZE; + } else { + /* TODO: Create a new ATMU for MSIIR */ + pr_warn("%pOF: msi-address-64 address of %llx is " + "unsupported\n", hose->dn, address); + } + } + + sz = min(mem, paddr_lo); + mem_log = ilog2(sz); + + /* PCIe can overmap inbound & outbound since RX & TX are separated */ + if (early_find_capability(hose, 0, 0, PCI_CAP_ID_EXP)) { + /* Size window to exact size if power-of-two or one size up */ + if ((1ull << mem_log) != mem) { + mem_log++; + if ((1ull << mem_log) > mem) + pr_info("%pOF: Setting PCI inbound window " + "greater than memory size\n", hose->dn); + } + + piwar |= ((mem_log - 1) & PIWAR_SZ_MASK); + + if (setup_inbound) { + /* Setup inbound memory window */ + out_be32(&pci->piw[win_idx].pitar, 0x00000000); + out_be32(&pci->piw[win_idx].piwbar, 0x00000000); + out_be32(&pci->piw[win_idx].piwar, piwar); + } + + win_idx--; + hose->dma_window_base_cur = 0x00000000; + hose->dma_window_size = (resource_size_t)sz; + + /* + * if we have >4G of memory setup second PCI inbound window to + * let devices that are 64-bit address capable to work w/o + * SWIOTLB and access the full range of memory + */ + if (sz != mem) { + mem_log = ilog2(mem); + + /* Size window up if we dont fit in exact power-of-2 */ + if ((1ull << mem_log) != mem) + mem_log++; + + piwar = (piwar & ~PIWAR_SZ_MASK) | (mem_log - 1); + pci64_dma_offset = 1ULL << mem_log; + + if (setup_inbound) { + /* Setup inbound memory window */ + out_be32(&pci->piw[win_idx].pitar, 0x00000000); + out_be32(&pci->piw[win_idx].piwbear, + pci64_dma_offset >> 44); + out_be32(&pci->piw[win_idx].piwbar, + pci64_dma_offset >> 12); + out_be32(&pci->piw[win_idx].piwar, piwar); + } + + /* + * install our own dma_set_mask handler to fixup dma_ops + * and dma_offset + */ + ppc_md.dma_set_mask = fsl_pci_dma_set_mask; + + pr_info("%pOF: Setup 64-bit PCI DMA window\n", hose->dn); + } + } else { + u64 paddr = 0; + + if (setup_inbound) { + /* Setup inbound memory window */ + out_be32(&pci->piw[win_idx].pitar, paddr >> 12); + out_be32(&pci->piw[win_idx].piwbar, paddr >> 12); + out_be32(&pci->piw[win_idx].piwar, + (piwar | (mem_log - 1))); + } + + win_idx--; + paddr += 1ull << mem_log; + sz -= 1ull << mem_log; + + if (sz) { + mem_log = ilog2(sz); + piwar |= (mem_log - 1); + + if (setup_inbound) { + out_be32(&pci->piw[win_idx].pitar, + paddr >> 12); + out_be32(&pci->piw[win_idx].piwbar, + paddr >> 12); + out_be32(&pci->piw[win_idx].piwar, piwar); + } + + win_idx--; + paddr += 1ull << mem_log; + } + + hose->dma_window_base_cur = 0x00000000; + hose->dma_window_size = (resource_size_t)paddr; + } + + if (hose->dma_window_size < mem) { +#ifdef CONFIG_SWIOTLB + ppc_swiotlb_enable = 1; +#else + pr_err("%pOF: ERROR: Memory size exceeds PCI ATMU ability to " + "map - enable CONFIG_SWIOTLB to avoid dma errors.\n", + hose->dn); +#endif + /* adjusting outbound windows could reclaim space in mem map */ + if (paddr_hi < 0xffffffffull) + pr_warn("%pOF: WARNING: Outbound window cfg leaves " + "gaps in memory map. Adjusting the memory map " + "could reduce unnecessary bounce buffering.\n", + hose->dn); + + pr_info("%pOF: DMA window size is 0x%llx\n", hose->dn, + (u64)hose->dma_window_size); + } +} + +static void setup_pci_cmd(struct pci_controller *hose) +{ + u16 cmd; + int cap_x; + + early_read_config_word(hose, 0, 0, PCI_COMMAND, &cmd); + cmd |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY + | PCI_COMMAND_IO; + early_write_config_word(hose, 0, 0, PCI_COMMAND, cmd); + + cap_x = early_find_capability(hose, 0, 0, PCI_CAP_ID_PCIX); + if (cap_x) { + int pci_x_cmd = cap_x + PCI_X_CMD; + cmd = PCI_X_CMD_MAX_SPLIT | PCI_X_CMD_MAX_READ + | PCI_X_CMD_ERO | PCI_X_CMD_DPERR_E; + early_write_config_word(hose, 0, 0, pci_x_cmd, cmd); + } else { + early_write_config_byte(hose, 0, 0, PCI_LATENCY_TIMER, 0x80); + } +} + +void fsl_pcibios_fixup_bus(struct pci_bus *bus) +{ + struct pci_controller *hose = pci_bus_to_host(bus); + int i, is_pcie = 0, no_link; + + /* The root complex bridge comes up with bogus resources, + * we copy the PHB ones in. + * + * With the current generic PCI code, the PHB bus no longer + * has bus->resource[0..4] set, so things are a bit more + * tricky. + */ + + if (fsl_pcie_bus_fixup) + is_pcie = early_find_capability(hose, 0, 0, PCI_CAP_ID_EXP); + no_link = !!(hose->indirect_type & PPC_INDIRECT_TYPE_NO_PCIE_LINK); + + if (bus->parent == hose->bus && (is_pcie || no_link)) { + for (i = 0; i < PCI_BRIDGE_RESOURCE_NUM; ++i) { + struct resource *res = bus->resource[i]; + struct resource *par; + + if (!res) + continue; + if (i == 0) + par = &hose->io_resource; + else if (i < 4) + par = &hose->mem_resources[i-1]; + else par = NULL; + + res->start = par ? par->start : 0; + res->end = par ? par->end : 0; + res->flags = par ? par->flags : 0; + } + } +} + +int fsl_add_bridge(struct platform_device *pdev, int is_primary) +{ + int len; + struct pci_controller *hose; + struct resource rsrc; + const int *bus_range; + u8 hdr_type, progif; + u32 class_code; + struct device_node *dev; + struct ccsr_pci __iomem *pci; + u16 temp; + u32 svr = mfspr(SPRN_SVR); + + dev = pdev->dev.of_node; + + if (!of_device_is_available(dev)) { + pr_warn("%pOF: disabled\n", dev); + return -ENODEV; + } + + pr_debug("Adding PCI host bridge %pOF\n", dev); + + /* Fetch host bridge registers address */ + if (of_address_to_resource(dev, 0, &rsrc)) { + printk(KERN_WARNING "Can't get pci register base!"); + return -ENOMEM; + } + + /* Get bus range if any */ + bus_range = of_get_property(dev, "bus-range", &len); + if (bus_range == NULL || len < 2 * sizeof(int)) + printk(KERN_WARNING "Can't get bus-range for %pOF, assume" + " bus 0\n", dev); + + pci_add_flags(PCI_REASSIGN_ALL_BUS); + hose = pcibios_alloc_controller(dev); + if (!hose) + return -ENOMEM; + + /* set platform device as the parent */ + hose->parent = &pdev->dev; + hose->first_busno = bus_range ? bus_range[0] : 0x0; + hose->last_busno = bus_range ? bus_range[1] : 0xff; + + pr_debug("PCI memory map start 0x%016llx, size 0x%016llx\n", + (u64)rsrc.start, (u64)resource_size(&rsrc)); + + pci = hose->private_data = ioremap(rsrc.start, resource_size(&rsrc)); + if (!hose->private_data) + goto no_bridge; + + setup_indirect_pci(hose, rsrc.start, rsrc.start + 0x4, + PPC_INDIRECT_TYPE_BIG_ENDIAN); + + if (in_be32(&pci->block_rev1) < PCIE_IP_REV_3_0) + hose->indirect_type |= PPC_INDIRECT_TYPE_FSL_CFG_REG_LINK; + + if (early_find_capability(hose, 0, 0, PCI_CAP_ID_EXP)) { + /* use fsl_indirect_read_config for PCIe */ + hose->ops = &fsl_indirect_pcie_ops; + /* For PCIE read HEADER_TYPE to identify controller mode */ + early_read_config_byte(hose, 0, 0, PCI_HEADER_TYPE, &hdr_type); + if ((hdr_type & 0x7f) != PCI_HEADER_TYPE_BRIDGE) + goto no_bridge; + + } else { + /* For PCI read PROG to identify controller mode */ + early_read_config_byte(hose, 0, 0, PCI_CLASS_PROG, &progif); + if ((progif & 1) && + !of_property_read_bool(dev, "fsl,pci-agent-force-enum")) + goto no_bridge; + } + + setup_pci_cmd(hose); + + /* check PCI express link status */ + if (early_find_capability(hose, 0, 0, PCI_CAP_ID_EXP)) { + hose->indirect_type |= PPC_INDIRECT_TYPE_EXT_REG | + PPC_INDIRECT_TYPE_SURPRESS_PRIMARY_BUS; + if (fsl_pcie_check_link(hose)) + hose->indirect_type |= PPC_INDIRECT_TYPE_NO_PCIE_LINK; + /* Fix Class Code to PCI_CLASS_BRIDGE_PCI_NORMAL for pre-3.0 controller */ + if (in_be32(&pci->block_rev1) < PCIE_IP_REV_3_0) { + early_read_config_dword(hose, 0, 0, PCIE_FSL_CSR_CLASSCODE, &class_code); + class_code &= 0xff; + class_code |= PCI_CLASS_BRIDGE_PCI_NORMAL << 8; + early_write_config_dword(hose, 0, 0, PCIE_FSL_CSR_CLASSCODE, class_code); + } + } else { + /* + * Set PBFR(PCI Bus Function Register)[10] = 1 to + * disable the combining of crossing cacheline + * boundary requests into one burst transaction. + * PCI-X operation is not affected. + * Fix erratum PCI 5 on MPC8548 + */ +#define PCI_BUS_FUNCTION 0x44 +#define PCI_BUS_FUNCTION_MDS 0x400 /* Master disable streaming */ + if (((SVR_SOC_VER(svr) == SVR_8543) || + (SVR_SOC_VER(svr) == SVR_8545) || + (SVR_SOC_VER(svr) == SVR_8547) || + (SVR_SOC_VER(svr) == SVR_8548)) && + !early_find_capability(hose, 0, 0, PCI_CAP_ID_PCIX)) { + early_read_config_word(hose, 0, 0, + PCI_BUS_FUNCTION, &temp); + temp |= PCI_BUS_FUNCTION_MDS; + early_write_config_word(hose, 0, 0, + PCI_BUS_FUNCTION, temp); + } + } + + printk(KERN_INFO "Found FSL PCI host bridge at 0x%016llx. " + "Firmware bus number: %d->%d\n", + (unsigned long long)rsrc.start, hose->first_busno, + hose->last_busno); + + pr_debug(" ->Hose at 0x%p, cfg_addr=0x%p,cfg_data=0x%p\n", + hose, hose->cfg_addr, hose->cfg_data); + + /* Interpret the "ranges" property */ + /* This also maps the I/O region and sets isa_io/mem_base */ + pci_process_bridge_OF_ranges(hose, dev, is_primary); + + /* Setup PEX window registers */ + setup_pci_atmu(hose); + + /* Set up controller operations */ + setup_swiotlb_ops(hose); + + return 0; + +no_bridge: + iounmap(hose->private_data); + /* unmap cfg_data & cfg_addr separately if not on same page */ + if (((unsigned long)hose->cfg_data & PAGE_MASK) != + ((unsigned long)hose->cfg_addr & PAGE_MASK)) + iounmap(hose->cfg_data); + iounmap(hose->cfg_addr); + pcibios_free_controller(hose); + return -ENODEV; +} +#endif /* CONFIG_FSL_SOC_BOOKE || CONFIG_PPC_86xx */ + +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_FREESCALE, PCI_ANY_ID, + quirk_fsl_pcie_early); + +#if defined(CONFIG_PPC_83xx) || defined(CONFIG_PPC_MPC512x) +struct mpc83xx_pcie_priv { + void __iomem *cfg_type0; + void __iomem *cfg_type1; + u32 dev_base; +}; + +struct pex_inbound_window { + u32 ar; + u32 tar; + u32 barl; + u32 barh; +}; + +/* + * With the convention of u-boot, the PCIE outbound window 0 serves + * as configuration transactions outbound. + */ +#define PEX_OUTWIN0_BAR 0xCA4 +#define PEX_OUTWIN0_TAL 0xCA8 +#define PEX_OUTWIN0_TAH 0xCAC +#define PEX_RC_INWIN_BASE 0xE60 +#define PEX_RCIWARn_EN 0x1 + +static int mpc83xx_pcie_exclude_device(struct pci_bus *bus, unsigned int devfn) +{ + struct pci_controller *hose = pci_bus_to_host(bus); + + if (hose->indirect_type & PPC_INDIRECT_TYPE_NO_PCIE_LINK) + return PCIBIOS_DEVICE_NOT_FOUND; + /* + * Workaround for the HW bug: for Type 0 configure transactions the + * PCI-E controller does not check the device number bits and just + * assumes that the device number bits are 0. + */ + if (bus->number == hose->first_busno || + bus->primary == hose->first_busno) { + if (devfn & 0xf8) + return PCIBIOS_DEVICE_NOT_FOUND; + } + + if (ppc_md.pci_exclude_device) { + if (ppc_md.pci_exclude_device(hose, bus->number, devfn)) + return PCIBIOS_DEVICE_NOT_FOUND; + } + + return PCIBIOS_SUCCESSFUL; +} + +static void __iomem *mpc83xx_pcie_remap_cfg(struct pci_bus *bus, + unsigned int devfn, int offset) +{ + struct pci_controller *hose = pci_bus_to_host(bus); + struct mpc83xx_pcie_priv *pcie = hose->dn->data; + u32 dev_base = bus->number << 24 | devfn << 16; + int ret; + + ret = mpc83xx_pcie_exclude_device(bus, devfn); + if (ret) + return NULL; + + offset &= 0xfff; + + /* Type 0 */ + if (bus->number == hose->first_busno) + return pcie->cfg_type0 + offset; + + if (pcie->dev_base == dev_base) + goto mapped; + + out_le32(pcie->cfg_type0 + PEX_OUTWIN0_TAL, dev_base); + + pcie->dev_base = dev_base; +mapped: + return pcie->cfg_type1 + offset; +} + +static int mpc83xx_pcie_write_config(struct pci_bus *bus, unsigned int devfn, + int offset, int len, u32 val) +{ + struct pci_controller *hose = pci_bus_to_host(bus); + + /* PPC_INDIRECT_TYPE_SURPRESS_PRIMARY_BUS */ + if (offset == PCI_PRIMARY_BUS && bus->number == hose->first_busno) + val &= 0xffffff00; + + return pci_generic_config_write(bus, devfn, offset, len, val); +} + +static struct pci_ops mpc83xx_pcie_ops = { + .map_bus = mpc83xx_pcie_remap_cfg, + .read = pci_generic_config_read, + .write = mpc83xx_pcie_write_config, +}; + +static int __init mpc83xx_pcie_setup(struct pci_controller *hose, + struct resource *reg) +{ + struct mpc83xx_pcie_priv *pcie; + u32 cfg_bar; + int ret = -ENOMEM; + + pcie = zalloc_maybe_bootmem(sizeof(*pcie), GFP_KERNEL); + if (!pcie) + return ret; + + pcie->cfg_type0 = ioremap(reg->start, resource_size(reg)); + if (!pcie->cfg_type0) + goto err0; + + cfg_bar = in_le32(pcie->cfg_type0 + PEX_OUTWIN0_BAR); + if (!cfg_bar) { + /* PCI-E isn't configured. */ + ret = -ENODEV; + goto err1; + } + + pcie->cfg_type1 = ioremap(cfg_bar, 0x1000); + if (!pcie->cfg_type1) + goto err1; + + WARN_ON(hose->dn->data); + hose->dn->data = pcie; + hose->ops = &mpc83xx_pcie_ops; + hose->indirect_type |= PPC_INDIRECT_TYPE_FSL_CFG_REG_LINK; + + out_le32(pcie->cfg_type0 + PEX_OUTWIN0_TAH, 0); + out_le32(pcie->cfg_type0 + PEX_OUTWIN0_TAL, 0); + + if (fsl_pcie_check_link(hose)) + hose->indirect_type |= PPC_INDIRECT_TYPE_NO_PCIE_LINK; + + return 0; +err1: + iounmap(pcie->cfg_type0); +err0: + kfree(pcie); + return ret; + +} + +int __init mpc83xx_add_bridge(struct device_node *dev) +{ + int ret; + int len; + struct pci_controller *hose; + struct resource rsrc_reg; + struct resource rsrc_cfg; + const int *bus_range; + int primary; + + is_mpc83xx_pci = 1; + + if (!of_device_is_available(dev)) { + pr_warn("%pOF: disabled by the firmware.\n", + dev); + return -ENODEV; + } + pr_debug("Adding PCI host bridge %pOF\n", dev); + + /* Fetch host bridge registers address */ + if (of_address_to_resource(dev, 0, &rsrc_reg)) { + printk(KERN_WARNING "Can't get pci register base!\n"); + return -ENOMEM; + } + + memset(&rsrc_cfg, 0, sizeof(rsrc_cfg)); + + if (of_address_to_resource(dev, 1, &rsrc_cfg)) { + printk(KERN_WARNING + "No pci config register base in dev tree, " + "using default\n"); + /* + * MPC83xx supports up to two host controllers + * one at 0x8500 has config space registers at 0x8300 + * one at 0x8600 has config space registers at 0x8380 + */ + if ((rsrc_reg.start & 0xfffff) == 0x8500) + rsrc_cfg.start = (rsrc_reg.start & 0xfff00000) + 0x8300; + else if ((rsrc_reg.start & 0xfffff) == 0x8600) + rsrc_cfg.start = (rsrc_reg.start & 0xfff00000) + 0x8380; + } + /* + * Controller at offset 0x8500 is primary + */ + if ((rsrc_reg.start & 0xfffff) == 0x8500) + primary = 1; + else + primary = 0; + + /* Get bus range if any */ + bus_range = of_get_property(dev, "bus-range", &len); + if (bus_range == NULL || len < 2 * sizeof(int)) { + printk(KERN_WARNING "Can't get bus-range for %pOF, assume" + " bus 0\n", dev); + } + + pci_add_flags(PCI_REASSIGN_ALL_BUS); + hose = pcibios_alloc_controller(dev); + if (!hose) + return -ENOMEM; + + hose->first_busno = bus_range ? bus_range[0] : 0; + hose->last_busno = bus_range ? bus_range[1] : 0xff; + + if (of_device_is_compatible(dev, "fsl,mpc8314-pcie")) { + ret = mpc83xx_pcie_setup(hose, &rsrc_reg); + if (ret) + goto err0; + } else { + setup_indirect_pci(hose, rsrc_cfg.start, + rsrc_cfg.start + 4, 0); + } + + printk(KERN_INFO "Found FSL PCI host bridge at 0x%016llx. " + "Firmware bus number: %d->%d\n", + (unsigned long long)rsrc_reg.start, hose->first_busno, + hose->last_busno); + + pr_debug(" ->Hose at 0x%p, cfg_addr=0x%p,cfg_data=0x%p\n", + hose, hose->cfg_addr, hose->cfg_data); + + /* Interpret the "ranges" property */ + /* This also maps the I/O region and sets isa_io/mem_base */ + pci_process_bridge_OF_ranges(hose, dev, primary); + + return 0; +err0: + pcibios_free_controller(hose); + return ret; +} +#endif /* CONFIG_PPC_83xx */ + +u64 fsl_pci_immrbar_base(struct pci_controller *hose) +{ +#ifdef CONFIG_PPC_83xx + if (is_mpc83xx_pci) { + struct mpc83xx_pcie_priv *pcie = hose->dn->data; + struct pex_inbound_window *in; + int i; + + /* Walk the Root Complex Inbound windows to match IMMR base */ + in = pcie->cfg_type0 + PEX_RC_INWIN_BASE; + for (i = 0; i < 4; i++) { + /* not enabled, skip */ + if (!(in_le32(&in[i].ar) & PEX_RCIWARn_EN)) + continue; + + if (get_immrbase() == in_le32(&in[i].tar)) + return (u64)in_le32(&in[i].barh) << 32 | + in_le32(&in[i].barl); + } + + printk(KERN_WARNING "could not find PCI BAR matching IMMR\n"); + } +#endif + +#if defined(CONFIG_FSL_SOC_BOOKE) || defined(CONFIG_PPC_86xx) + if (!is_mpc83xx_pci) { + u32 base; + + pci_bus_read_config_dword(hose->bus, + PCI_DEVFN(0, 0), PCI_BASE_ADDRESS_0, &base); + + /* + * For PEXCSRBAR, bit 3-0 indicate prefetchable and + * address type. So when getting base address, these + * bits should be masked + */ + base &= PCI_BASE_ADDRESS_MEM_MASK; + + return base; + } +#endif + + return 0; +} + +#ifdef CONFIG_PPC_E500 +static int mcheck_handle_load(struct pt_regs *regs, u32 inst) +{ + unsigned int rd, ra, rb, d; + + rd = get_rt(inst); + ra = get_ra(inst); + rb = get_rb(inst); + d = get_d(inst); + + switch (get_op(inst)) { + case 31: + switch (get_xop(inst)) { + case OP_31_XOP_LWZX: + case OP_31_XOP_LWBRX: + regs->gpr[rd] = 0xffffffff; + break; + + case OP_31_XOP_LWZUX: + regs->gpr[rd] = 0xffffffff; + regs->gpr[ra] += regs->gpr[rb]; + break; + + case OP_31_XOP_LBZX: + regs->gpr[rd] = 0xff; + break; + + case OP_31_XOP_LBZUX: + regs->gpr[rd] = 0xff; + regs->gpr[ra] += regs->gpr[rb]; + break; + + case OP_31_XOP_LHZX: + case OP_31_XOP_LHBRX: + regs->gpr[rd] = 0xffff; + break; + + case OP_31_XOP_LHZUX: + regs->gpr[rd] = 0xffff; + regs->gpr[ra] += regs->gpr[rb]; + break; + + case OP_31_XOP_LHAX: + regs->gpr[rd] = ~0UL; + break; + + case OP_31_XOP_LHAUX: + regs->gpr[rd] = ~0UL; + regs->gpr[ra] += regs->gpr[rb]; + break; + + default: + return 0; + } + break; + + case OP_LWZ: + regs->gpr[rd] = 0xffffffff; + break; + + case OP_LWZU: + regs->gpr[rd] = 0xffffffff; + regs->gpr[ra] += (s16)d; + break; + + case OP_LBZ: + regs->gpr[rd] = 0xff; + break; + + case OP_LBZU: + regs->gpr[rd] = 0xff; + regs->gpr[ra] += (s16)d; + break; + + case OP_LHZ: + regs->gpr[rd] = 0xffff; + break; + + case OP_LHZU: + regs->gpr[rd] = 0xffff; + regs->gpr[ra] += (s16)d; + break; + + case OP_LHA: + regs->gpr[rd] = ~0UL; + break; + + case OP_LHAU: + regs->gpr[rd] = ~0UL; + regs->gpr[ra] += (s16)d; + break; + + default: + return 0; + } + + return 1; +} + +static int is_in_pci_mem_space(phys_addr_t addr) +{ + struct pci_controller *hose; + struct resource *res; + int i; + + list_for_each_entry(hose, &hose_list, list_node) { + if (!(hose->indirect_type & PPC_INDIRECT_TYPE_EXT_REG)) + continue; + + for (i = 0; i < 3; i++) { + res = &hose->mem_resources[i]; + if ((res->flags & IORESOURCE_MEM) && + addr >= res->start && addr <= res->end) + return 1; + } + } + return 0; +} + +int fsl_pci_mcheck_exception(struct pt_regs *regs) +{ + u32 inst; + int ret; + phys_addr_t addr = 0; + + /* Let KVM/QEMU deal with the exception */ + if (regs->msr & MSR_GS) + return 0; + +#ifdef CONFIG_PHYS_64BIT + addr = mfspr(SPRN_MCARU); + addr <<= 32; +#endif + addr += mfspr(SPRN_MCAR); + + if (is_in_pci_mem_space(addr)) { + if (user_mode(regs)) + ret = copy_from_user_nofault(&inst, + (void __user *)regs->nip, sizeof(inst)); + else + ret = get_kernel_nofault(inst, (void *)regs->nip); + + if (!ret && mcheck_handle_load(regs, inst)) { + regs_add_return_ip(regs, 4); + return 1; + } + } + + return 0; +} +#endif + +#if defined(CONFIG_FSL_SOC_BOOKE) || defined(CONFIG_PPC_86xx) +static const struct of_device_id pci_ids[] = { + { .compatible = "fsl,mpc8540-pci", }, + { .compatible = "fsl,mpc8548-pcie", }, + { .compatible = "fsl,mpc8610-pci", }, + { .compatible = "fsl,mpc8641-pcie", }, + { .compatible = "fsl,qoriq-pcie", }, + { .compatible = "fsl,qoriq-pcie-v2.1", }, + { .compatible = "fsl,qoriq-pcie-v2.2", }, + { .compatible = "fsl,qoriq-pcie-v2.3", }, + { .compatible = "fsl,qoriq-pcie-v2.4", }, + { .compatible = "fsl,qoriq-pcie-v3.0", }, + + /* + * The following entries are for compatibility with older device + * trees. + */ + { .compatible = "fsl,p1022-pcie", }, + { .compatible = "fsl,p4080-pcie", }, + + {}, +}; + +struct device_node *fsl_pci_primary; + +void __init fsl_pci_assign_primary(void) +{ + struct device_node *np; + + /* Callers can specify the primary bus using other means. */ + if (fsl_pci_primary) + return; + + /* If a PCI host bridge contains an ISA node, it's primary. */ + np = of_find_node_by_type(NULL, "isa"); + while ((fsl_pci_primary = of_get_parent(np))) { + of_node_put(np); + np = fsl_pci_primary; + + if (of_match_node(pci_ids, np) && of_device_is_available(np)) + return; + } + + /* + * If there's no PCI host bridge with ISA, arbitrarily + * designate one as primary. This can go away once + * various bugs with primary-less systems are fixed. + */ + for_each_matching_node(np, pci_ids) { + if (of_device_is_available(np)) { + fsl_pci_primary = np; + return; + } + } +} + +#ifdef CONFIG_PM_SLEEP +static irqreturn_t fsl_pci_pme_handle(int irq, void *dev_id) +{ + struct pci_controller *hose = dev_id; + struct ccsr_pci __iomem *pci = hose->private_data; + u32 dr; + + dr = in_be32(&pci->pex_pme_mes_dr); + if (!dr) + return IRQ_NONE; + + out_be32(&pci->pex_pme_mes_dr, dr); + + return IRQ_HANDLED; +} + +static int fsl_pci_pme_probe(struct pci_controller *hose) +{ + struct ccsr_pci __iomem *pci; + struct pci_dev *dev; + int pme_irq; + int res; + u16 pms; + + /* Get hose's pci_dev */ + dev = list_first_entry(&hose->bus->devices, typeof(*dev), bus_list); + + /* PME Disable */ + pci_read_config_word(dev, dev->pm_cap + PCI_PM_CTRL, &pms); + pms &= ~PCI_PM_CTRL_PME_ENABLE; + pci_write_config_word(dev, dev->pm_cap + PCI_PM_CTRL, pms); + + pme_irq = irq_of_parse_and_map(hose->dn, 0); + if (!pme_irq) { + dev_err(&dev->dev, "Failed to map PME interrupt.\n"); + + return -ENXIO; + } + + res = devm_request_irq(hose->parent, pme_irq, + fsl_pci_pme_handle, + IRQF_SHARED, + "[PCI] PME", hose); + if (res < 0) { + dev_err(&dev->dev, "Unable to request irq %d for PME\n", pme_irq); + irq_dispose_mapping(pme_irq); + + return -ENODEV; + } + + pci = hose->private_data; + + /* Enable PTOD, ENL23D & EXL23D */ + clrbits32(&pci->pex_pme_mes_disr, + PME_DISR_EN_PTOD | PME_DISR_EN_ENL23D | PME_DISR_EN_EXL23D); + + out_be32(&pci->pex_pme_mes_ier, 0); + setbits32(&pci->pex_pme_mes_ier, + PME_DISR_EN_PTOD | PME_DISR_EN_ENL23D | PME_DISR_EN_EXL23D); + + /* PME Enable */ + pci_read_config_word(dev, dev->pm_cap + PCI_PM_CTRL, &pms); + pms |= PCI_PM_CTRL_PME_ENABLE; + pci_write_config_word(dev, dev->pm_cap + PCI_PM_CTRL, pms); + + return 0; +} + +static void send_pme_turnoff_message(struct pci_controller *hose) +{ + struct ccsr_pci __iomem *pci = hose->private_data; + u32 dr; + int i; + + /* Send PME_Turn_Off Message Request */ + setbits32(&pci->pex_pmcr, PEX_PMCR_PTOMR); + + /* Wait trun off done */ + for (i = 0; i < 150; i++) { + dr = in_be32(&pci->pex_pme_mes_dr); + if (dr) { + out_be32(&pci->pex_pme_mes_dr, dr); + break; + } + + udelay(1000); + } +} + +static void fsl_pci_syscore_do_suspend(struct pci_controller *hose) +{ + send_pme_turnoff_message(hose); +} + +static int fsl_pci_syscore_suspend(void) +{ + struct pci_controller *hose, *tmp; + + list_for_each_entry_safe(hose, tmp, &hose_list, list_node) + fsl_pci_syscore_do_suspend(hose); + + return 0; +} + +static void fsl_pci_syscore_do_resume(struct pci_controller *hose) +{ + struct ccsr_pci __iomem *pci = hose->private_data; + u32 dr; + int i; + + /* Send Exit L2 State Message */ + setbits32(&pci->pex_pmcr, PEX_PMCR_EXL2S); + + /* Wait exit done */ + for (i = 0; i < 150; i++) { + dr = in_be32(&pci->pex_pme_mes_dr); + if (dr) { + out_be32(&pci->pex_pme_mes_dr, dr); + break; + } + + udelay(1000); + } + + setup_pci_atmu(hose); +} + +static void fsl_pci_syscore_resume(void) +{ + struct pci_controller *hose, *tmp; + + list_for_each_entry_safe(hose, tmp, &hose_list, list_node) + fsl_pci_syscore_do_resume(hose); +} + +static struct syscore_ops pci_syscore_pm_ops = { + .suspend = fsl_pci_syscore_suspend, + .resume = fsl_pci_syscore_resume, +}; +#endif + +void fsl_pcibios_fixup_phb(struct pci_controller *phb) +{ +#ifdef CONFIG_PM_SLEEP + fsl_pci_pme_probe(phb); +#endif +} + +static int add_err_dev(struct platform_device *pdev) +{ + struct platform_device *errdev; + struct mpc85xx_edac_pci_plat_data pd = { + .of_node = pdev->dev.of_node + }; + + errdev = platform_device_register_resndata(&pdev->dev, + "mpc85xx-pci-edac", + PLATFORM_DEVID_AUTO, + pdev->resource, + pdev->num_resources, + &pd, sizeof(pd)); + + return PTR_ERR_OR_ZERO(errdev); +} + +static int fsl_pci_probe(struct platform_device *pdev) +{ + struct device_node *node; + int ret; + + node = pdev->dev.of_node; + ret = fsl_add_bridge(pdev, fsl_pci_primary == node); + if (ret) + return ret; + + ret = add_err_dev(pdev); + if (ret) + dev_err(&pdev->dev, "couldn't register error device: %d\n", + ret); + + return 0; +} + +static struct platform_driver fsl_pci_driver = { + .driver = { + .name = "fsl-pci", + .of_match_table = pci_ids, + }, + .probe = fsl_pci_probe, +}; + +static int __init fsl_pci_init(void) +{ +#ifdef CONFIG_PM_SLEEP + register_syscore_ops(&pci_syscore_pm_ops); +#endif + return platform_driver_register(&fsl_pci_driver); +} +arch_initcall(fsl_pci_init); +#endif |